Infinity CM2, Infinity [BEST] @InfinityBoxTalks 24-Apr-2024 [page 13]

[page-1] [page-2] [page-3] [page-4] [page-5] [page-6] [page-7] [page-8] [page-9] [page-10] [page-11] [page-12] [page-13] [page-14] [page-15] [page-16] [page-17] [page-18] [page-19] [page-20] [page-21] [page-22] [page-23] [page-24] [page-25] [page-26] [page-27] [page-28] [page-29] [page-30] [page-31] [page-32] [page-33] [page-34] [page-35] [page-36] [page-37] [page-38] [page-39] [page-40] [page-41] [page-42] [page-43] [page-44] [page-45] [page-46] [page-47] [page-48] [page-49] [page-50] [page-51] [page-52] [page-53] [page-54]

InfinityBoxTalks 2023-04-17

[14:14:03] cpu 7731e help me
[14:13:49] mobicel oreo i try all boot one by one but is not done
[14:13:05] https://infinity-box.com/?r=100192
[14:13:05] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operati
[14:09:43] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6511b.ff36017f.2b6806bf
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL :
[14:07:23] Tecno KI7 imei 0000000
Any one have any idea to resolve this problem Brothers
[13:40:51] Anyone with solution ?????
[13:39:15] Nokia 1.4 hard reset
[13:35:33] Help me BF7 test point
[13:27:43] Please guy how have encountered this error and how were you able to fix it? I have been finding solution about this for long.
[13:23:53] Pls any with bd4j nv file
[13:10:38] Please I need A662l firmware link
[12:55:58] Reset password or e-mail here https://infinity-box.com/service/\r
\r
Click here https://www.youtube.com/watch?v=KogYDEkg-O8
[12:55:58] help me with this Server Error : Access denied: ^^Username 0069F34052
Wrong username or password
Product 908 declined
Service counter overflow
[12:55:39] How do reset
[12:54:53] any help
[12:52:58] tecno b1,ive try so many ways not connecting to system
[12:01:43] Please I need solution
Infinix x6511b v78
[11:41:57] Please I need infinix 6819 test point
[11:32:41] Nothing found for x665e test point

If you will get the file upload it to support with iosFileUploader

[11:32:20] Found 4 files x665e
1. infinix_MT6765_INFINIX_Infinix_X665E_12_X665E_H6126YZAaAbAcAdAeAfAgAhAi_S_GL_220921V598_SP1A.210812.016_x665e_h6126
2. infinix_MT6765_INFINIX_Infinix_X665E_12_X665E_H6126YZAaAbAcAdAeAfAgAhAi_S_GL_220929V628_SP1A.210812.016_x665e_h6126
3. infinix_x665e_MT6765_5E1A008BDF1CC594
[11:27:06] Plz I need help tecno BD3 stop while flashing with cm2
[11:23:12] After flashing it shows CHECK DOWNLOAD STATE, LAST DOWNLOAD MAYBE NOT COMPLETED.

What might be the error here please?
[11:19:34] https://infinity-box.com/?r=100192
[11:19:34] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Realme : realme-c21y.1b79c210.6993ea1e
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Powe
[11:14:53] remove battery but same error
[11:09:09] realme c21y rmx3263 logo sutak
[11:08:30] https://infinity-box.com/?r=100192
[11:08:30] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Realme : C21Y_RMX3263_RMX3261_RMX3262
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[10:58:26] Anyone with bf7 test point
[10:52:44] https://t.me/AIT_AIRDROP_BOT?start=hgv0LRJx5
[10:51:22] 2.42
[10:48:20] 😍Tecno esaybuy
[10:48:11] Done For all models available solution
[10:45:10] Done, without relock A032f.
[10:27:38] X6511G TESTPOINT pls
[10:25:26] testpoint
[10:00:11] I have put username and password but still same error
[09:28:17] I can\'t see link to download this boot-pack
[09:25:42] Boot done and stuck here who know the problem and solutions?
[09:16:05] Yes
[09:11:44] Cm2 will never update qualcomm
[08:53:08] How to use it
[08:50:57] hallo all tools working except AST, 1.00 version create fault.bin, i deleted it, other versions not create fault.bin
[08:48:02] Solution please
[08:41:39] How do I get credits admin I need your help
[08:41:19] Am trying to unlock network lock in Nokia c20 but it asks me credit
[08:31:18] Was trying to remove frp on itel A32F but fail to open port, help me please
[08:29:43] I have changed drivers, cable, base/DA but not working.
[08:28:17] MTK2
[08:28:09] CM2 MTK
[08:27:56] Fail to open port, please help me!
[08:21:54] Some are asking for money for the test point before released
[08:20:59] Here https://infinity-box.com/?r=100221\r
if not exist - try google and send your image here for all users
[08:20:59] BF7 test point needed urgently
[07:55:24] we\'re together infinity hope you consider most feedback (qualcomm tool Update)
[07:45:44] samsung a03s frp
[07:28:19] Send me the error bro
[07:27:40] pattern lock
[07:27:39] Please send me error
[07:27:34] TA-1431 Nokia C21 Plus
[07:20:50] Ticket-ID:1681642224.326 fault.bin 00A5641155 [66]
Post by 00A5641155 » 16 Apr 2023, 10:50

Ticket-ID:1681642224.326
Username: 00A5641155
Attached file: fault.bin
CODE: SELECT ALL

Fault code: 66

There is a software conflict with this application: Eltima software|Virtual Serial Port Driver
Do not run this application at the same time with Infinity to avoid bad result.

What to do:

You will get an reply with instruction soon, wait litle bit and return back
[05:48:49] what is the current version cm2mt2 ?
[05:46:14] thanks trust me i use englinsh please
[05:39:10] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6511b.ff36017f.2b6806bf
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL :
[05:29:19] While flashing
[05:29:17] Stuck here rmx 3511
[05:14:11] Try that
[05:11:30] Please am begging. I need itel 662L boot file for frp. I need help please.
[04:47:30] Same firmware different v022 or what?
[04:36:20] mi account reset tab add
[04:21:32] I want to merge BEST2 to INFINITY CM2 DONGLE?
[03:34:56] Available
[03:24:10] Download the good firmware and write it again

InfinityBoxTalks 2023-04-16

[23:57:17] Charging boards panels available for all Android mobile phones whatsapp +918378842052
[23:33:45] Please wat the cause of this error trying to identify phone
[22:10:15] Is this really Infinity BEST section? 😢
[21:36:54] ✅JOIN ON OUR OFFICIAL TELEGRAM CHANNEL FOR ALL LATEST UPDATES FROM UNLOCKPERFECT.COM ✅


https://t.me/unlockperfect
[21:36:10] Hello Samsung A207f frp??
[21:19:02] Any solution try to used preloader to flash x666c after using ufi reprogram the mmc
[20:59:31] Does it identity by cm2?
[20:21:09] Unlock phones using credits with cm2 not possible if your license expired,?
[20:02:45] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6511b.ff36017f.2b6806bf
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL :
[19:42:02] When will we have boot packs that can be extracted over old to avoid downloading the the whole pack which includes the new updates. Data consumption.
[17:26:11] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6511b.ff36017f.2b6806bf
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL :
[17:25:08] help
[17:19:31] tecno camon 18premier da file is needed ch9 ch9n am stuck
[16:28:04] GREAT CM2 TEAM I HAVE EXPERIENCE ONE DIFFICULT TASK ON TECNO BD4H EASYBUY PHONE, AFTER FLASHING THE PHONE WILL POWER & TECNO RINGTONE WILL RING AS A NOTICE BUT NOTHING TO DISPLAY ON THE SCREEN TO SHOW AS LIGHT, I HAVE USED ALL THE FIRMWARE FROM SUPPORT, PLS WHAT COULD BE THE SOLUTION???? FOR SUCH PROBLEM
[16:16:50] Thank u Bro for the advice, does it mean it doesn\'t have solution yet?
[16:15:03] Becareful bro with this phone
[16:11:58] Please who has flashed Tecno (Ci6) Camon 19 easybuy phone successfully,
[16:00:08] Known as Tecno spark 10c
[15:59:50] Yes
[15:59:29] Is your cm2 update?
[15:59:26] Please who has flashed Tecno kI5K even if it is not with cm2spd because cm2spd not supporting it
[15:58:20] I select What to do read info and flash?
[15:55:11] Yes
[15:55:00] Ok but can I flash it with CM2?
[15:54:11] Pas de problème mais je peux flashé avec CM2
[15:52:04] Download the file first
[15:51:20] how can i do for this frp
[15:24:52] Inbox me
[15:22:32] Itel A662L
[15:20:30] The model bro
[15:19:58] Help me for his FRP please
[15:19:05] x6511b]
[15:00:41] Operation : Read FW [ v2.14 ]
Extra : Ignore CriticalPart Verify : Enabled

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6511b.ff36017f.ce2d6a65
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FD
[14:42:23] Smart 6 easybuy solution x6511b
[14:35:04] Cm2 ka koi Qualcomm and mtk ka latest setup share kar dijiye
[14:34:26] .
[14:33:04] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6511b.ff36017f.2b6806bf
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL :
[14:18:08] Tecno bf7 test point i need pls and pls
[13:55:06] HTC any solution pls
[13:52:01] Yes
[13:51:36] You mean the original imie on the phone/ that come with the phone?
[13:38:32] Restore your IMEI
[13:30:00] Pls how do I fix a problem on Tecno bd4 sim card not show after removing easy buy on the phone.The 2 imie are correct and it\'s accessible
[13:27:31] Haven\'t found schematic for it, done it by emmc unsolder and easy-jtag
[13:04:34] @Vitpod83
[13:03:37] I have uninstalled and reinstalled again still same thing
[13:03:12] @admins
[13:03:05] Anytime I open sp2 I do get this error message
[13:01:32] Hi friends Tecno Pova Neo 2 LG6n Model Infinity CM2 Auth supported?
[12:49:50] hold tp
[11:37:04] Realme c33 not add cm2 team plz add
[11:33:15] Please herp
[11:28:14] Done?
[11:24:51] Need help
[11:24:21] Nokia
[11:08:04] Solution available. ❤️😘
[09:29:04] Tecno Bd4H test point please
[09:18:09] TECNO BD4H Boot please
[08:59:06] 16.4.1 iso
[08:58:55] This one already try
[08:56:09] Stock
[08:56:02] This is stoch on 80 %
[08:53:44] If need best price for plist text me
[08:53:20] Plist generator windows
[08:52:22] Ok
[08:51:40] Sending
[08:41:54] fMi off plist genrate tool for window please
[08:38:00] Please admin how to format Infinix x669
[06:56:57] Yes
[06:53:18] After changing problem solved?
[06:52:14] How to fix this??Me I just changed windows from 10 to 7.
[06:47:46] OK thank u
[06:35:28] It can show done but still need network lock just because was tryd with another tool before cm2
[06:28:48] This error give me stress but it\'s easy to fix it
[04:58:08] Share or upload to Infinity-box support
[01:10:17] BF7 test point is available you guys talk to me is available test point 👈
[00:59:05] Please I need Infinix x669 boot loader please 🥺

InfinityBoxTalks 2023-04-15

[23:48:47] A dongle box is like your wife take good care of them so they can also take care of you. I love a dongle coz you can do other functions without the stress of DATA CONNECTION also it is the best can\'t easily have cracked tool because infinity team always update dongle manager for security. Think about what I mentioned to you.
[23:32:02] Android 12 easybuy
[23:31:38] Anyone here inow how to root infinix x6656c hot 20i
[23:31:05] And it still gives me an error
[23:31:00] I downloaded the required flash scatter file image
[23:30:38] Some people lost their done by misplacing it some theirs got damage etc. He is asking when will cm2 have logins instead of physical dongle 😀
[23:29:50] The device is dead
[23:29:11] redmi note 9
[22:40:47] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r

[22:40:47] Please how do I update my cm2 smart card
[22:33:46] And adge
[22:33:25] Close google
[22:20:23] Download new version 1.09
[22:05:36] ?????
[21:41:43] Yes I understand what you said but there\'s no similar loader there that will flash format the phone
[21:39:28] no need v 20, just try loaders for similar models.

You must select one loader, try.
then select next loader and try
and so on

do not rty many times with the same one loader but try with different loaders.
Do you understand my idea?
[21:37:38] I can\'t try again with this boot v20 I\'ll wait for next updatem and I\'ll just return the phone if the owner wish to collect it, I\'ve hold the phone like a month and now.
[21:34:45] use test-point from Infinity server and send sw log text
[21:34:02] what job?
when freez?

you must read this https://infinity-box.com/?r=100199
hope you understand
[21:33:21] ok friend!
[21:33:07] try to find another file
[21:30:00] don\'t spam
try silently and send here final result!
[21:28:58] Lost?
Why?
[21:28:37] ok
[21:28:30] Possible problem reason found for your case.
updated ver will be tomorrow
[21:14:46] Let me help you bro
[21:10:55] Pls, add bootloader unlock support for spd /unisoc in the next update of sp2 module. Best regards.
[20:57:12] Which is the Booth key, POWER BUTTON or VOLUME BUTTONS?
[20:45:17] when cm2 would stop using dongle becouse i lost 6 dongles
[20:44:44] when cm2 would stop using dongle becouse i lost 6 dongles
[20:38:48] https://infinity-box.com/?r=100192
[20:38:48] Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable
[20:38:48] https://infinity-box.com/?r=100192
[20:38:48] Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6511b.a86bfed0.8cc26bd6
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 sec
[20:38:47] https://infinity-box.com/?r=100192
[20:38:47] Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6511b.8a7dba6e.50608c97
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 sec
[20:38:47] https://infinity-box.com/?r=100192
[20:38:47] Card found : 98F3AC46 , v0154
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Open : X6511B-F6318-11.0-OP-V026-20211027_1553_user.pac
VER : BP_R2.0.1
LEN : 4.18 GiB
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V026-20211027_1553

Reading package ...
Read package finished!

Product Brand : Infinix
Product Device : X6511B
Product Model : Infinix X6511B
Product Name : X6511B
Patch Level : RP1A.201005.001
Display ID : X6511B-F6318-11.0-OP-V026-20211027
Ver. I
[20:38:23] One phone with all this boot, I think something is wrong somewhere, I\'ve tried all this boot no one flash the phone, infinix x6511b latest version
[20:30:16] Anyone with this undate❓
[20:12:30] send e-mail to support https://infinity-box.com/contact/
[20:11:55] try different fdl, find good one, write here model and fdl name

how to do it https://infinity-box.com/?r=100192
[20:05:30] I still can\'t flash infinix x6511b the one with latest version
[19:58:38] It still giving me Fdl file error
[19:38:57] install boot=pack and check there
[19:38:37] pls always write full info like model name, problem, sw version etc
[19:37:59] I am blind and do not download images,

read https://infinity-box.com/?r=100199
[19:34:31] Bf7
[19:31:02] Snap it verry clear
[19:16:38] I wish we can also use cm2 to bypass mdm in Nokia\'s 🙏
[19:10:30] Sawa
[18:59:37] Pls bb5
[18:57:58] Ok sir tnx
[18:54:54] try it
[18:53:37] reset info here https://infinity-box.com/service/
[18:53:06] install boot pack
[18:50:34] https://infinity-box.com/?r=100192
[18:45:13] Dm
[18:43:47] https://infinity-box.com/?r=100199
[18:43:30] Any problem?
[18:43:18] any
[18:42:56] your PC antivirus is crazy, uninstall or dicable it
[18:39:49] Pronblem?
[18:30:54] use another file
[18:29:15] https://infinity-box.com/?r=100199
[18:29:00] put another good
[18:28:41] problem?
[18:28:26] do you know how to find it at pcb?
[18:27:57] text
[18:27:51] Infinity cm2 you\'re the best 👍
[18:27:28] Send your dongle S/N to any seller and oder [CM2] support renew for 1 or 2 years

Sellers - https://infinity-box.com/buy/
[18:26:56] why?
[18:26:43] exe ver?
[18:26:15] https://infinity-box.com/?r=100192
[18:24:51] Infinity #CM2SP2 boot-pack v1.20 with updated loaders
https://infinity-box.com/?r=100185
[18:20:06] Fail
[18:17:41] Itel p682l stuck here please help me what can I do 🙏
[17:20:58] Availavle
[17:09:47] X6511G TESTPOINT PLS
[16:52:10] Here https://infinity-box.com/?r=100221\r
if not exist - try google and send your image here for all users
[16:52:10] BF7 test point needed urgently
[16:51:28] Pls I need samsung
A03 frp. Solution
[16:27:27] ?
[16:26:07] ineed help 😣
[16:24:31] Here https://infinity-box.com/?r=100221\r
if not exist - try google and send your image here for all users
[16:24:31] BF7 test point needed
[16:23:32] Thank you Admin... It has been resolved.....
[15:44:45] I can\'t still flash x6511b latest version
[15:41:54] What have successfully flash infinix x6511b lastest version with this cm2 SPD boot update
[15:31:51] How can i renew my cm2 it has expired
[14:20:54] Pls solution
[14:20:05] Pls
[14:17:26] .
[14:14:26] No x657
[14:13:49] Pls nokia
[14:12:36] TB3-730X Lenovo Firmware
[14:12:14] TB3-730X
[14:09:35] Redmi k30 mi account unlock help plz........?
[14:05:55] yes
[14:04:31] Error
[14:04:25] I put the correct the same thing
[13:59:59] Incorrect firmware
[13:56:35] What\'s the error here please?
[13:51:43] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[13:51:43] Inbox
[13:46:29] Is x665c test point working? I\'ve tried yet no result
[13:43:40] Kg5j testpoint solution?
[13:39:12] try here @FlashFileSearchBot
[13:39:12] I want to repair nvram tecno kg5j it shows that error,file downloaded from cm2 server
[13:37:14] Tnx
[13:37:00] Fkshkgtnx
[13:29:14] Ok
[13:28:38] Take 29 and desable windows defender
[13:27:15] Pls admin why if i download bb5 is show
[13:17:27] one
[13:17:25] any obe
[13:15:08] ineed help
[13:14:09] ???
[13:11:07] Hi
[13:09:28] What ?
[13:08:54] Try
[12:59:37] ???
[12:55:36] Itel a60 frp
[12:55:22] Hello
[12:46:19] I have downloaded another file from the support and flashed it with it, but the phone just keep rebooting from startup
Itel P661W
[12:32:59] Spd sc 9832e
[12:32:20] I kall k300 file link
[12:00:28] Freezing on Da started
[11:49:58] Any solution
[11:47:35] Text me unlock code
[11:38:13] To work on spark 8c kg5j
[11:33:00] Which mode and settings to spark8c
[11:28:58] What\'s?
[11:18:49] yes
[11:17:56] Redmi note 10
[11:14:01] X6511B ANY SOLUTION?
[11:12:32] Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : SlowSparse Fix : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : X6511B-F6318-11.0-OP-V78-20221102.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion
[11:08:08] Good Day
Nokia TA-1359 Reset
[11:07:55] tenco BF7 test point
[10:05:54] Nokia Ta1356 cm2 suport model????
[10:02:20] Dear team Please help me looder for itel a24 L5007
[10:00:38] Hello Cm2 suport unlockr nokia ta1356 ??
[09:58:45] Hi
[09:57:22] Here https://infinity-box.com/?r=100221\r
if not exist - try google and send your image here for all users
[09:57:22] Tecno bf7 test point pls
[09:44:27] I how to recover lost longing details for my account
[09:32:44] Please those cm2spd support Tecno Ki5k flashing.
[09:11:42] Share if you have s18 fdl
[09:04:14] Samsung a125f emergency call after reset
[09:02:26] Itel A56 (w6004)
[08:47:02] pls help me... my cm2 was stollen with active subscription inside... pls I want to transfer the license to another one... I have another cm2 with no active sub in it so I want to transfer my license to it admin pls help me with the process...
[08:43:28] Thanks brother
[08:27:32] Be7 testpoint
[08:13:28] pls help me... my cm2 was stollen with active subscription inside... pls I want to transfer the license to another one... I have another cm2 with no active sub in it so I want to transfer my license to it admin pls help me with the process...
[07:20:55] Model
[06:58:06] I dont think that will be possible
[06:47:13] And there is only one file A56
[06:46:10] The firmware I used is from infinity server, but after flash touch screen not working 😕
[06:41:06] CM2SP2 WE ARE WAITING FOR UNISOC SPD BOOTLOADER UNLOCK OPTIONS
[06:34:48] Sometimes its gives error msgs
[06:34:34] Why is the new cm2 mt2 upqdte super slow whendoing job it freezes
[06:14:43] Since it stuck on jumping to brom mode
[06:13:59] Meaning there is no another way like other methods of flashing to install new firmware
[05:41:01] Take it to calcare
[05:05:50] I need help latest update for Tecno kg5j test point not working my phone stuck on dm- verity- corrupted
[05:03:21] Hi admin
[04:26:31] 🙏
[03:40:14] test point?
[03:40:04] Send e-mail to help@infinity-box.com
[03:39:30] https://infinity-box.com/?r=100192
[03:39:14] https://infinity-box.com/?r=100199
[03:38:11] unpack tool
[03:37:38] https://infinity-box.com/?r=100192
[03:36:33] https://infinity-box.com/?r=100192
[03:35:59] What is the problem with the phone?
Is it stuck on boot-logo?
[03:34:55] Make this https://infinity-box.com/?r=100155
[03:34:41] try again
result?
[03:33:04] What is the problem?
[03:32:47] Yes Sir!
[03:32:25] Make this https://infinity-box.com/?r=100155
[03:32:04] https://infinity-box.com/?r=100192
[03:31:22] ok
[03:30:59] Make this https://infinity-box.com/?r=100155
[03:30:34] model?
[03:30:13] https://infinity-box.com/news/?r=4302
[03:29:55] download from Infinty server, there are many such files there
[03:29:25] https://infinity-box.com/news/?r=4302
[03:28:51] next time ban
[03:28:31] https://infinity-box.com/?r=100192
[03:28:12] fake nokia?
[03:26:07] make search here https://forum.gsmhosting.com/vbb/f296/
As I remember there is info about your phone there
[03:24:06] https://www.youtube.com/infinitybox/playlists
[03:23:07] install Infinity CM2SP2 boot-pack https://infinity-box.com/?r=100185
[03:22:32] https://www.nirsoft.net/utils/blue_screen_view.html
[03:22:13] ok
[03:21:59] https://infinity-box.com/?r=100192
[03:21:41] what is the problem?
[03:21:07] you must delete video and send text
[03:20:05] https://infinity-box.com/?r=100192
[03:19:46] Try it and let me know
[03:19:29] server need renewed dongle
[03:19:01] install SoC drivers well!
[03:18:28] What is the problem?
[03:17:38] Why?
[03:17:20] Problem?
[03:17:06] https://infinity-box.com/?r=100192
[03:16:39] Make this https://infinity-box.com/?r=100155
[03:16:32] Make this https://infinity-box.com/?r=100155
[03:16:08] Type: Infinity-Box/Dongle [CM2]
S/N: 397223B8
Username: 00397223B8
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0153; Expired: 14-Jul-2022

Your [CM2] support period is expired.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period - https://infinity-box.com/doc/?r=17

[03:15:46] https://infinity-box.com/news/?r=4302
[03:14:35] Do you have dongle connected?
[03:13:52] Found 20 files infinix_X657, search limit is 20 files per server
1. recent_MT6580_INFINIX_MOBILITY_LIMITED_Infinix_X657_10_X657_H8030AB_QGo_OP_220809V742_QP1A.190711.020_x657_h8030
2. infinix_X657_H8030A_QGo_OP_211001V577
3. infinix_MT6761_INFINIX_MOBILITY_LIMITED_Infinix_X657B_11_X657B_H6117EIKL_
[03:13:06] https://infinity-box.com/?r=100192
[03:08:43] https://infinity-box.com/?r=100192
[03:08:24] use test point
[03:08:01] send good quality pcb photo
[03:06:52] install soc drivers wll and uninstall all useless tools
[02:36:53] All latest update test point are blocked and rerouted to EMMC so if you connect any phone with test point and it does not connect couple the phone and return to customer because no tool can work on those device for now except through hardware before any technician can further do anything on them HOPE U ALL UNDERSTAND THE RISK
[01:08:39] Did you get the S663l fdl file i m also lookin for it assist if get it bro

InfinityBoxTalks 2023-04-14

[22:11:23] Can the program unlock Galaxie a32
[21:56:09] Huawei Y5p DRA-LX9 is supported to unlock network on cm2
[21:55:23] HELP
[21:51:21] https://infinity-box.com/?r=100192
[21:33:59] what is our problem?
[21:29:47] I have upgraded my dongle, now am using cm2mt2 and cm2sp2 will this driver work with it?
[21:26:10] download firmware from iInfinity server
[21:21:12] you must select another loader
try them all
[21:20:12] https://infinity-box.com/?r=100192
[21:18:48] buy CM2 Dongle https://infinity-box.com/buy/
[21:16:46] https://infinity-box.com/?r=43
[20:51:55] Word bro 👍
[20:34:29] I hope they\'re working on this for a better testimony for all.

Cm2 used to be the best, and I hope it\'s gets better for us all
[20:32:11] I have and same tired firmware same error
[20:27:43] Can you imagine... What a mess
[20:03:56] I have the solution
[19:53:30] Please house, i can\'t flash both cm2mt2 and cm2sp2 again. I have formatted my laptop today which drive do i need to install?
[19:50:14] How can i access or get infinity cm2sp exe without box?
[19:50:08] P32 backup nvram need
[19:49:49] Same here bro
[19:48:50] Same thing bro
[19:48:22] HI
[19:38:41] I NEED KD7 MT6761 NVRAM FILE
[19:38:15] HELLO FAM
[19:24:38] itel S18 S663L
[19:21:26] Thanks bro, I\'m not impatient though, I just wish and hope Infinity Team comes up with better updates to fix this issue.

Cos i fixed the phone eventually with the same file that failed and stuck on \"Preparing target\" on Cm2sp2 with another free tool!
[19:15:24] Brother please even things will be ok thing are not easy tem are working hard for those MDM phone . Even ather tool it failed if you don\'t use correct file please brother be patient ♥️
[19:11:27] The phone model bro
[19:07:15] Sure bro
[18:59:07] Understood bro, It\'s Easy buy phone, when a free tool came to rescue without fdl , cm2sp2, a paid app should impress us and do better!
[18:54:59] Brother it different things with company phone and this normal phone campany phone you can flash with normal frimwer. Anyway what is the problem the phone
[18:45:53] 💯 correct
[18:38:41] How to flash please help me
[18:28:04] Really
[18:25:35] Pls help me with infinix 657 test point
[18:12:46] Select the phone loader
[17:55:48] NOKIA C21 BEST TOOL FOR FORMATINGPP

P










.)
[17:53:27] Here https://infinity-box.com/?r=100221\r
if not exist - try google and send your image here for all users
[17:53:27] Nokia TA 1332 TEST POINT NEEDED?
[17:28:38] Any good files to fix this please
[17:28:04] Itel a56 after flash touch screen not working
[17:11:18] Easybuy bro
[17:07:16] What is the problem with the phone?
[17:01:49] What\'s the build number
[17:00:23] Fdl error any solution please
[16:59:49] Got this error x6511b
Mdm bypass
[16:58:51] Thanks bro
[16:46:50] 100%
[16:36:28] Sure?
[16:35:35] I even get the file but preparing target problem
[16:31:14] Get MDM file and you do the job with cm2
[16:25:29] Yes
[16:25:25] MDM phone?
[16:25:05] S18
[16:23:24] Model
[16:21:11] Any solution to this with cm2 connection reboot blue pages
[16:14:42] Backup [20] to C:\\InfinityBox\\CM2MT2\\backup\\MT6797__A1A0A1F60FA8AB3F1FF97E4F096B1481\\
[19] Read: NVRAM
[6] Read: NVDATA
[12] Read: PROINFO
[20] Read: LK
[5] Read: NVCFG
[8] Read: PROTECT1
[1] Read: PGPT
[0] Read: PRELOADER
Done 8 files
Compress: C:\\InfinityBox\\CM2MT2\\backup\\MT6797__A1A0A1F60FA8AB3F1FF97E4F096B1481\\
Cleanup...
Ok
Verify C:\\InfinityBox\\CM2MT2\\backup\\MT6797__A1A0A1F60FA8AB3F1FF97E4F096B1481.7z
Verified

STORAGE : Life Status : eMMC : NOT implemented in selected DA!
STORAGE : OTP Status : L
[16:14:42] Operation: Identify Device [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BOTH [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM40)
MODE: BOOTROM; PORT: 40
Waiting BOOT ack...
BROM: Skip ACK verify
BROM:
[16:12:55] I need help for Infinix x6511G boot or test point
[16:11:54] Hello guys I need help for oppo K7x Id remove help
[16:08:17] Please help me
[16:07:46] Vivo y21 flash not warking no barom mod enable
[16:07:07] ISP
[16:06:45] Sp2 stock at preparing target for more than 10mins then failed several times
Pls help
[15:51:36] Allwinner cpu A23 reset support ?
[15:35:25] I think with this latest security . No way
[15:34:21] Select correct model CPU or you can use pac as fdl
[15:32:47] Pls, help
Itel A662L FRP WITH CM2 .
failed with the below error 👇👇
[15:29:34] How to use this app
[15:21:52] Help
[15:19:39] Infinix hot 30i frp please help
[15:14:58] Bro this device solved?
[15:02:24] To remove pattern lock without data loss on infinix x682B with cm2 any solution
[14:55:58] Hi
[14:55:35] Hello I need x657 file
[14:52:11] Infinix smart 6plus X6511g test points help guys
[14:52:00] Change port
[14:20:04] Tecno BD3 firmware needed
[14:15:08] What probleme?
[14:14:58] https://infinity-box.com/news/?r=4301
[13:44:57] I have a problème
[13:44:38] Hello
[13:43:37] I need help please
[13:42:48] NOKIA TA-1342 Hard reset any
[13:31:26] Mine has jux opened now
[13:28:38] pass 12345678 is wrong for extract
[13:28:17] DongleManager 1.94 please
[13:28:03] Infinix Smart 6 plus x6511g test points Help guys
[13:21:41] X6511b build number V91 fdl needed please
[13:20:05] === DongleManager [Infinity] v1.92 [4/14/2023 3:17:29 PM] ===
Searching...
Card-Reader: Generic EMV Smartcard Reader 0
HWID: 000023B821F34082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): 397223B8
Firmware version: 0153.02
=== Started: 4/14/2023 3:17:31 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication stage error:
Server
[13:14:34] Me also have same Problem
[13:12:10] https://youtu.be/jjPqAzxH4bU
[13:05:28] Infinix x6816 file
I need this file
[13:00:50] Pls how can I fix this
[12:32:08] House pls I need tecno bf7 testpoint
[12:28:00] Change another loader
[12:26:40] How to flash Nokia TA-1380
[12:26:03] Nokia TA-1380
[12:24:41] make this https://infinity-box.com/?r=100155
[12:24:41] https://forum.gsmhosting.com/vbb/f296/dongle-misconfiguration-3149567/#post14776137
[12:11:27] Tecno ki5k gives me these error when flashing
Anyone one with suggestion?
[12:09:41] Please
[12:09:38] Image of resistor
[12:09:05] My CM2 not working any 1 Help me
[12:08:41] Hello everyone
How are you ……?
[12:07:41] Hello members, tecno ki5k not working on flashing.
[12:03:36] Infinix x6511g tewt points pliz guys
[12:00:41] lic
[12:00:34] Can you send me the picture?
[12:00:14] Can vpn affect my cm2 tool?
[11:58:06] lic
[11:57:58] rezistor
[11:48:01] Redmi A1+ no command how to fix?
[11:44:12] Admin i need help with x6816 test point
[11:02:15] https://www.youtube.com/watch?v=UYkxPBP4j9A&ab_channel=Dr.ResearchCenterTeam
[10:55:12] https://youtu.be/ND4cAqeq9SU
[10:38:18] Do u hv one⁉️
[10:37:44] Used cm2 make sure you select correct model CPU
[10:36:53] Because you are not using correct files
[10:13:12] Itel a662l frpbypass help please
[10:05:19] i need link please
[10:05:05] https://easy-firmware.com/index.php?a=downloads&b=file&id=408203
[09:25:15] 9
[09:14:58] Infinix x657c smart 5 can\'t call and imei is correct has anyone have fix to this problem
[09:03:46] How can I solve this issues
[09:03:35] After reinstall working one time if I close exe and open never open giving error
[09:02:54] When I try to open cm2sp2 giving this error
[08:57:54] No! You can’t! You must renew support to use server auth!
[08:46:07] Nokia TA-1468 (C2 2nd Edition) network unlock any help
[08:37:40] What is the solution
[08:27:17] Bb2
[08:22:23] Select order boot
[08:22:08] If my license expired on my cm2 , I can\'t remove frp spd phone using infinity server?
[08:17:54] Once u click format it will dead if didn\'t finish flash
[08:14:57] Hello please help
[08:13:37] Blackview a56
Can CM2 unlock network of this phone
[07:23:39] Mdm
[07:21:03] What is the solution to S18 stop at prepare target
[07:13:47] Itel p682l dead while flashing with cm2
[06:30:15] With what kind of thing should I wear infinix hot 12 play file I tried with cm2 war x6816c
[06:29:50] With what kind of thing should I wear infinix hot 12 play file I tried with cm2 war x6816c
[05:56:47] Pls, we need a support for itel a60, a662l boot file, fdl, and bootloader unlock for spd and unisoc devices as was in your MTK mt2 module. Thank you.
[05:55:28] I can help you
[05:30:36] Pls add itel A60, a662l boot file, fdl 1 & 2 and bootloader unlock support for spd devices as well. Best regards
[05:25:04] Itel A60, a662l boot file and fdl support please
[05:22:25] English
[05:02:28] Pls someone should help me with itel p651w nvram
[04:30:50] Please someone should help me with oale q2 firmware
[03:33:50] Hmmm
[01:59:12] hello guys i have a question can someone who have knowledge about infinity cm dm me?

InfinityBoxTalks 2023-04-13

[23:58:10] Device : Nokia 215 4G TA-1284
[23:57:18] Plz help
[23:57:04] Device : TA-1284
LOG :
Reset [ALL USER DATA] + [Security Code] but NOT FRP!
Continue?
Yes
Loading config from server...

1. Power device Off
2. Connect cable
Looking for device...
Device found
PTFN: SPRD U2S Diag (COM435) vid:2E04 pid:0023
Enter Diag Mode[1]...
Reset Interface...
Diag Mode Fail. Try again!
Reset [ALL USER DATA] + [Security Code] but NOT FRP!
Continue?
Yes
Loading config from server...

1. Power device Off
2. Connect cable
Looking for device...
Device found
PTFN: SPRD DIAG (COM436) vid:
[23:04:28] How much ?
[23:04:21] Ok
[23:03:45] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r

[23:03:45] How to activate cm2 on Nokia best
[23:00:15] Tecno bf7 testpoint
[22:55:30] X6517 firmware
[22:39:09] J005cm _pcBO1_gsm_mt6260_soo.jOO5c_m_yfaprtxp_220402 bin
[22:36:34] Nokia 1174
[22:36:22] Pls everyone I need this file
[22:18:37] Show yr select
[22:16:55] C me
[21:54:28] Itel A58 A661w stop at prepare target
[21:49:19] For anyone who want to join a group of professionals in mobile software inbox for link
[21:48:16] Yes
[21:36:06] Tecno Spark 10C (KI5K)
[20:18:30] I need
[20:12:28] I will try itel A661W (A58) ,and samsung AO32FU2 if added 😀
[20:07:58] anyone can help
[19:55:56] Turn on your internet
[19:51:44] Please help me with A662L fg or fdl boot file
[19:46:28] Done
[19:40:31] Please am begging
[19:39:51] Please am begging
[19:38:44] ta-1030 mt6260 firmware clone anyone have it??? please
[19:38:28] Help pls
[19:37:03] Found 40 files ta-1030, search limit is 20 files per server
1. nokia_3310_2g_3310_2g_TA_1008_TA_1030_here
2. nokia_3310_2g_TA_1030_40.02.11_TA_1030_059Z0X8_40.02.11_EI
3. nokia_3310_2g_TA_1030_40.02.11_TA_1030_059Z0X8_40.02.11_Arabic_Urdu_Portuguese_French_English_Hindi
4. [19:36:51] Please am begging i need itel A662L fg or fdl boot file
[19:25:17] Hello everyone please can someone know how to factory reset this tablet?
[19:22:32] A662L fg file
[19:13:06] Pls I need Samsung aO32f spd backup file
[19:12:18] Good evening
[19:01:19] Hello
[18:48:56] Please i need itel 662L and 663L fdl
[18:28:28] Hallo
[17:45:07] Icloud bypass

Loewst price

Payment before
Only trusted client 🤏

Send order🛒

Join Our WhatsApp group👇
https://chat.whatsapp.com/Ih5kLUrcNtN05oQIGuwHbf
[17:06:03] Thank you please add memory tool new spdsp2 update?
[17:00:44] I don\'t understand
[16:47:16] Get good frimwer MDM file do with cm2 you good to go 👍 brother
[16:47:06] Infinity #CM2SP2 boot-pack v1.19 with updated loaders
https://infinity-box.com/?r=100185
[16:45:48] Tecno BF7 test point pinout please?
[16:44:56] Itel s18
[16:44:16] Used cm2 with good frimwer 1000000% work
[16:41:03] Not available
[16:39:25] Here https://infinity-box.com/?r=100221\r
if not exist - try google and send your image here for all users
[16:39:25] Bf7 test point pls
[16:24:25] Is there update for spd
Security plugin remove?
[16:10:38] Model
[16:07:28] Read well and fixed
[16:00:39] https://infinity-box.com/?r=100192
[16:00:39] VER : BP_R2.0.1
LEN : 140285F51 ( 5.00 GiB )
CPU : KI5k
VER : KI5k-F065ABCDEAgAh-S-GL-20230224V330

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation
[15:57:24] Who has faced this?
And what\'s the cause of it
[15:06:16] What model is that???
[15:05:02] What was problem before flash?
[14:56:36] Itel s18 dead while flashing with cm2spd
[14:52:52] Cm2 needs to work on Broom lock.
Either by da or which ever new model and sec can\'t do frp
[14:18:26] It you device a good condition?
[13:33:27] Infinx X665e frp ???
Any one help me Please 🥺
[13:02:44] What causes this?!
[12:57:36] Hi how to fix it
[12:23:08] Kg5j testpoint solution anyone have ?
[11:59:33] It will roll on that super for like hrs
[11:59:11] Please guys, I really need help fixing this phone... X657... After flashing is not powering up
[11:53:53] Tecno Spark 7 FRP Reset Done
[11:51:30] Nokia RM-970 Factory Reset Done
[11:31:09] MDM?
[10:46:10] X6516
[10:44:32] Unisoc 9863a
[10:41:41] Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6516.56ac4307.6b1e66f5
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

ERASE : FORMAT WHOLE FLASH ...
ERASE : FORMAT FLASH Completed!

PM
[10:34:24] Or i use hydra
[10:34:19] Oppo A3s flash by unlock tool will it work
[10:31:13] how do i download this?
[10:23:37] Found 20 files infinix_x657, search limit is 20 files per server
1. recent_MT6580_INFINIX_MOBILITY_LIMITED_Infinix_X657_10_X657_H8030AB_QGo_OP_220809V742_QP1A.190711.020_x657_h8030
2. infinix_X657_H8030A_QGo_OP_211001V577
3. infinix_MT6761_INFINIX_MOBILITY_LIMITED_Infinix_X657B_11_X657B_H6117EIKL_
[10:22:50] Found 21 files x657, search limit is 20 files per server
1. nokia_230_RM_1173_40.00.11_HMD_RM_1173_059X657_40.00.11_NDT_MEA_IK_SILVER_LATIN_NG
2. recent_X657B_H6117EIKL_RGo_OP_S2_221121V777
3. recent_X657B_H6117EIKL_RGo_OP_S2_221121V777
4. [10:20:59] Then what should I do
[10:18:22] Found 1 file MT6582__Android__A73_5G
1. recent_20_MT6582_Android_A73_Ultra_5G_12.0_s700_lyx_l107_011_480x1014_en_yl_v02_LRX21M_lmkj6582_wt_l_s700

[10:17:58] Nothing found for MT6582__Android__A73_5G__6.0__s700_lyx_l107

If you will get the file upload it to support with iosFileUploader

[10:12:39] Bro send 1 flash log there are variants off that mobile

And mdm is not removed simply by flashing normal fw
[10:10:09] And I gat the same phone I copied file I flashed in it still failed
[10:09:19] More than two
[10:08:18] How many files you have download?
[10:03:47] No
[10:03:15] Ok 1 not so easy to remove mdm
Brother
You did make few backup before?
[10:02:27] It had mdm then I used firmware to flash but now it\'s dead
[10:01:51] Even if I do only frp still the same
[10:01:23] Yes
[10:01:00] Emmc was good health?
[09:59:41] Any solution
[09:59:36] Infinix x657 dead after flashing with cm2
[09:59:03] Any solution please
[09:58:48] X6511b v91 doesn\'t identify
[09:57:37] Any other solution
[09:57:24] But not removed
[09:57:11] Frp failed with cm2
[09:47:51] Admin please
[09:43:31] How any other method
[09:34:16] Change method
[09:02:45] Admin I need help
[08:59:51] VIVO Y30 (1938) (PD1987F) LATEST SEC FRP REMOVED BY CM2MT2
[08:59:41] If you need bf7 testpoint dm
[08:50:25] But still frp is there
[08:49:04] Available bro
[08:46:33] Help please
[08:46:28] Samsung A032f frp failed with cm2
[08:45:15] Any update about mtk brom blocked
[08:25:03] Any one with kf7 test point
[08:05:58] Hi
Please help me
Solutions
Frp xiaomi note 11s
Mtk
[07:49:49] I need help tecno spark 10c ki5k no gree flash
[07:41:53] Mt2 fail to init meta mode ZTE z5156cc please help
[07:31:37] Infinix x677 test point
[07:30:22] Yeah it should check infinity server for tp
[07:29:49] Okay
[07:29:40] Download mode is the phone Samsung device
[07:16:18] Available, with hardware knowledge
[07:10:04] Tecno bf7 test point anyone
[07:02:34] Please may i hve s663l fdl.. Thank yu in advance
[06:53:08] Hi team please for boot file pova LE6H spd
[06:30:52] LG Q52 test point
[06:12:51] Dont downgrade. There s a special tool to put it to download mode
[06:11:45] Kindily lookin for itel S662L fdl file  please assist
[06:10:46] Then download another firmware
[06:08:43] I used the fdl
[06:05:29] Thank u all for ur contributions
[05:45:42] You need fdl file
[05:44:55] It requires test point
[05:31:05] solution https://infinity-box.com/?r=100192
[05:31:05] Same itel S18 error, I have the same firmware build number, always stuck on prepare target, Now phone is dead.

Any solution please?
[05:08:04] Untick vbmeta_vendor.img and try again
[05:01:10] Downgrade the firmware
[04:02:50] Pless help
[03:55:31] ?
[03:55:30] Quien me ayuda con ese link please
[03:55:18] https://support.halabtech.com/index.php?a=downloads&b=file&id=730393
[01:14:13] All iPhone/iPads (Premium Service) Success Rate: 100% Support / Lost / Stolen /

!!! iCloud Unlock Services
~LOST MODE/ CLEAN MODE
~1-23hours
~Rejected devices supported ✅✅✅💫💫💫
[00:29:21] How do i get testpoints dat are working
[00:28:43] Check build number and run excatly same build

InfinityBoxTalks 2023-04-12

[23:50:32] Drive your system with manuall driver and make sure the file is the same version or high
[23:46:07] Ki7k not entering Meta mode
[23:38:37] Done that still d same
[23:10:08] Connect internet
[23:04:58] Pls how solve this (itel S18)
[22:28:09] Cm2 raphael v2
[22:26:13] Please tell us the solution 🙏
[21:51:05] Pls dead phone i want to flash but not read
[21:42:12] Get correct Fdl it will work
[21:33:17] Infinix X6511B v91 doesn\'t identify or connect
[20:41:01] Can cm2 remove frp on Nokia c1 second edition using test point?
[20:34:21] mauby i add some functions in this tool http://dl1.infinity-box.com/00/pub.php?dir=software/other/fast-check/&uid=19460&file=FAST%20CHECK%200.4%20rc5%20fix.zip
[20:30:15] Any diag helper for Qualcomm please
[19:58:44] It\'s not working. My fellow engineers too complain.
[18:59:15] Device has Locked brom
[18:57:53] wut?
[18:54:53] cltr 0
No solution
Was before checking
[18:43:37] Pls I need techno Bf7 test point
[18:35:30] flash with generic firmware
I am waiting for your good result!
[18:25:37] Easybuy plug
[18:24:10] Ok
[18:23:58] A631w easybuy any solution help me please
[18:20:53] Thanks
[18:08:51] send sw log text with TP and w/o TP
[18:08:31] Any of them
[18:06:13] Help with A042F cant boot on testpoint not working
[17:51:35] Which of this files can I download
[17:49:10] Flash the partition one after the other
[17:46:48] too many attempts during last 24 hours
wait
[17:45:58] https://infinity-box.com/?r=100192
[17:41:42] Where can I find flash file for this device?
[17:38:24] This problèm need solutions
[17:25:58] Yes
[17:21:35] Come
[17:18:34] Come
[17:17:30] I need a03 core MDM file
[17:09:16] https://infinity-box.com/service/
[17:01:38] Please help
[16:50:21] Flash the partition one after the other
[16:40:07] https://infinity-box.com/?r=100192
[16:14:20] Itel P682L prepare target time out not flashing
[15:53:41] https://infinity-box.com/?r=100199
[15:53:00] This mtk or cm2?
[15:52:44] support team check only text but not pictures
[15:50:24] Here is a preloader
[15:49:30] I already put preloader

Check my picture above. There\'s preloader there
[15:13:45] A509wm nvram
[14:57:55] Bf7 testpoint
[14:34:03] news page has news https://infinity-box.com/news/
[14:33:21] Contact to any seller - https://infinity-box.com/buy/
and order CM2 dongle
[14:32:53] what was the probblem before your tries?
[14:31:44] make Auto EMI box checked in Settings
[14:31:12] your problem is lack of reading skills!

you do not need test point, you must train in reading

Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[14:28:16] Is there no way to flash these phones
[14:26:21] Infinix smart 6, error message when trying to flash
[14:17:11] Pls what I\'m I missing infinix x665b identify before I flash rom
[13:46:28] Found 5 files a013g
1. samsung_a01_core_a03_core_a013g_test_point.jpg
2. samsung_a013f_a013g_test_point.jpg
3. recent_20_MT6739_samsung_SM_A013G_10_QP1A.190711.020.A013GJXU3AUD2_QP1A.190711.020_a01core
4. samsung_sm_a013g_MT6739_
[13:45:37] Sam / a01 core
[13:37:30] Found 8 files x5010
1. infinix_X5010_AW878ABCD_N_190320V92
2. infinix_X5010_7.0_NRD90M_Infinix_X5010_2018_05_05
3. infinix_MT6580_Infinix_Infinix_X5010_7.0_NRD90M_Infinix_X5010
4. infinix_x5010_aw878_MT6580_BD3FAACBE30A74BCE3334E
[12:43:36] Pls what\'s the cause
[12:42:22] Is hanging hare
[12:23:55] Good morning sir/ma. I’m a newbie and I’m in need of infinity cm2 dongle. How do I go about it sir/ma?
[12:22:54] Good morning management, how do I get cm2 dongle? I’m a newly graduated software engineer
[12:18:18] Whats new
[12:17:10] OK bro thanks
[12:16:28] Remember some devices you need to hold the boot key throughout while it\'s in the flashing progress
[12:15:22] Untick pmt
[12:03:31] Here https://infinity-box.com/?r=100221\r
if not exist - try google and send your image here for all users
[12:03:31] Tecno bf7 test point needed
[11:59:19] OK thanks
[11:56:57] Above I will start or below
[11:55:34] With what kind of thing should I wear infinix hot 12 play file I tried with cm2 war x6816c
[11:53:04] Kg5j?
[11:52:55] Have you fix it?
[11:52:41] Flash the partition one by one
[11:52:04] When using the infinix hot 12 play file, I tried using cm2, but it leaves here
[11:51:09] nv
[11:47:07] welcome
[11:43:26] https://infinity-box.com/?r=100199
[11:43:14] run CM2MT2.exe
[11:42:58] I downloaded the backup file and the process didn\'t work I downloaded from the sport
[11:41:42] boot blease
[11:41:03] included in software
[11:40:59] hello my friend what is the option do you not help me please
[11:38:43] https://infinity-box.com/?r=23
[11:38:31] Tecno BF7 BOOT FILE PLS
[11:38:10] Tecno BF7 TEST POINT PLS
[11:36:41] EXT_CSD Info:
EXT_CSD rev. : v1.8 ( MMC v5.1 )
CSD struct rev. : v1.2
Supported command sets : 1h
HPI features : 1h
BG operations support : 1h
BG operations status : 0h
Correct prg. sectors : 0h
1st init time after part. : 1000 ms
Min. write perf.(DDR,52MH,8b): 78h
Min. read perf. (DDR,52MH,8b): 8ch
TRIM timeout: 0 ms
Secure feature support: 55h
Secure erase timeout : 60000 ms
Secure trim ti
[11:36:41] Operation: HW Report [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
HW Report Mode: eMMC
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port_V1633 (COM15)
MODE: BOOTROM; PORT: 15
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
MEID: B34DD
[11:36:05] Thanx
[11:34:31] sure you know but just want to remind because people always forget something
[11:33:20] Hey set auto EMI off
[11:30:37] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[11:30:36] You need to format flash you can\'t just wipe it like that it won\'t work
[11:29:46] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[11:28:32] Pls who have t mobile revvl 6 pro firmware
[11:28:29] Mission impossible.
Potatoe traders in action here so don\'t be angry on him
[11:27:48] X665b

What to do pls
[11:27:31] fixed?
[11:18:12] The screenshot isn\'t clear
[11:17:59] My friend, I downloaded the file and the same thing, what is the problem
[11:16:53] Send a log, not a screenshot
[11:16:31] Infinix x665 not identified by cm2. Pls help me out
[11:16:20] Go to under security tab check you will see restore backup
[11:16:20] hello .how much is nokia g21 unlock code
[11:16:11] Go to under security tab check you will see restore backup
[11:15:15] Ok do that.
It may solve the problem
[11:14:56] I never
[11:13:45] And take note, have had you restored the backup before trying to write the imei?
[11:12:58] Live long brother
[11:11:28] Look for another nvram
[11:11:08] Your backup nvram is damaged
[11:09:51] Operation: Repair Security [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM36)
MODE: BOOTROM; PORT: 36
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]
MEID: 2
[11:09:44] bro has given it has jumped but having this error
[11:06:47] Do you think I don’t know this before now?
[11:04:47] apply point well
[11:04:14] got you
[11:03:47] When you connect the phone once DA started disconnect one wire of the tp
[11:03:02] waiting
[11:02:16] Try this immediately the DA started removing one connection from that tp try it and give me feedback
[11:01:51] last warning my friend
here is chat for engineers but not potatoe traders who want to repair phonew when they are free

if you want to work well you must learn but not clict to buttons randomly.
hope you understand
[10:57:37] Where is the new sec, I\'m seeing old in that photo you sent
[10:57:14] ok
[10:56:52] Let me see the tp you use.
This phone has two difference types of tp
[10:56:17] this is new security sir, old sec no problem it jump to brom
[10:54:55] it means you must double check test-point image and apply it well
[10:53:22] this software is for engineers but not for beginners
now you must read manual https://infinity-box.com/?r=100192
[10:52:36] it looks like he has a problem with test-point connection adn he should apply test-point well
[10:51:50] use cm2mt2 v2.43 https://infinity-box.com/?r=100202
[10:51:42] You are having old security why
I did the same phone yesterday
[10:51:40] use cm2mt2 v2.43 https://infinity-box.com/?r=100202
[10:51:05] I have install latest CM2 boot pack but stop at kick FDL please help
[10:50:20] click here https://infinity-box.com/?r=100189
[10:50:20] AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007024 : DA SEND ERROR!
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
[10:49:24] too busy with answers to other question so you must wait
[10:49:05] Download and install Infinity CM2SP2 boot-pack https://infinity-box.com/?r=100185
[10:48:54] Download and install Infinity CM2SP2 boot-pack https://infinity-box.com/?r=100185
[10:48:43] Any update for Qualcomm 780G ?
[10:48:02] tecno bd4a boot please
[10:47:47] connect with any default loaders and send sw log text
[10:47:46] Itel A661w fdl file please
[10:47:19] click here https://infinity-box.com/?r=100189
[10:47:19] Card found : C685A1F6 , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v124493 Ok!

Update configuration ...
Load IDBase v124493 Ok!

Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM103)
MODE : PRELOADER PORT
PORT : 103
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM :
[10:45:48] no
[10:45:09] I mean: have you had any success with kg5j test-point earlier?
[10:42:38] tecno bd4a frp unlock help me please
[10:39:14] new sec yes
[10:38:54] Download and install Infinity CM2SP2 boot-pack https://infinity-box.com/?r=100186
[10:38:30] is it your first kg5j?
[10:34:28] admin, this is with testpoint failing to sync with DA tecono spark 8c kg5j
[10:31:45] Hello frnds

Itel S663L boot files please
Any help
[10:31:36] Operation: Repair Security [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM36)
MODE: BOOTROM; PORT: 36
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]
MEID: 2
[10:30:12] apn writing help
[10:26:49] Flash every partition one by one or some partitions the first selection include super file.done
[10:16:41] Pls
[10:15:46] No hurry friend
For best results I suggest you to register at support forum and create new thread here
[10:14:54] Just a minute
[10:12:49] solution https://infinity-box.com/?r=100199
[10:12:16] Please someone help me I want to repair IMEI this phone but can\'t connect to brom even on tespoint
Is anybody else who have managed this new sec on cm2?
Need help
[09:44:39] try differnt loaders one by one
[09:39:06] read the fucking manual again!
[09:38:38] ok
[09:38:35] Cm2 has 2 boot for itel A661W and new boot itel A661W.xxxxx but not kck FDL
[09:38:23] https://forum.infinity-box.com/viewtopic.php?t=12623
[09:37:43] https://forum.infinity-box.com/viewtopic.php?t=1409
[09:36:21] Download and install Infinity CM2SP2 boot-pack https://infinity-box.com/?r=100186
[09:35:45] wut?
[09:35:29] what is the problem?
[09:35:12] if you unable to read my manuals you must change your job friend
[09:29:49] Please when will UNISOC T606 loader be available. (Especially For Tecno KI5K)
[08:45:14] Hello please how to use this tool
[08:30:47] You think every customers will be waiting for technicians to send log and wait for your team reply? We are talking about something that\'s happening almost everyday on different phones or new security updates on phones. There should be some boot selection. One will select tecno also select the model of the tecno but the tool will still be failing failing all the time. Most time I will result to Google or YouTube hand bypassing at last
[08:07:13] This solution is simple
[07:54:06] I have
[07:35:36] Nokia c10... Keep saying try remove battery
[06:52:03] Itel A58 FDL ERROR any one has latest FDL please .
[06:49:09] Try to study the boot that works for each phone for flashing but if it\'s only frp or wipe than one specific selection can handle it no matter the version. Maybe I will show you to avoid da error for ordinary frp on cm2.
[06:40:32] Register error
[06:22:29] https://forum.gsmhosting.com/vbb/f296/tecno-infinix-itel-firmware-request-thread-3082355/index5.html
[06:22:20] Please who\'ve got the test point of Infinix hot20i x665c. PLEASE it\'s urgent. The one on infinity sire didn\'t work.
[06:21:22] Pls anyone with Itel A33 Plus A509WM signed firmware v28 or above. Thanks 🙏
[06:12:15] Fixed?
[06:03:19] A035g need frp no loader ?
[05:54:12] How to enter Nokia 7 plus diag mode please help
[05:29:05] Who have tecno pop 7 BF7
[05:27:49] Infinify cm2 team the best and trusted team thanks
Infinity cm2 team
[05:26:28] Ok sir
[04:58:42] pliz add formatting of RPMB on spd module
[04:35:55] Found a solution thanks
[04:25:01] solution https://infinity-box.com/?r=100192
[04:20:36] Pls admin prepare target 4 spd what is solution
[04:11:39] boot ok
[04:09:35] Ok ser
[04:05:01] Infinix X669. Hot 30i reset not done. Any solution please?
[03:48:49] tecno bf7 boot please
[03:43:20] Ok will send soon
[03:41:38] solution https://infinity-box.com/?r=100199
[03:41:06] Mdm
[03:40:26] full flash with fw
[03:39:03] problem before flash?
[03:28:18] Itel S18 Dead while flashing with cm2spd any solution
[03:26:38] Ite S18 dead while flashing with cm2spd
[03:21:23] Tomorrow will copy log thanks 😊
[03:15:16] solution https://infinity-box.com/?r=100199
[02:48:45] I use same version it\'s showing done but nothing happen phone still locked 🔒 user password
[02:47:56] do it
[02:47:41] TA-1284 IS SUPPORTED ? Wanna wipe a device
[02:46:06] Infinity #CM2SP2 Diag Helper tool v1.09 https://infinity-box.com/news/?r=4301
[01:29:47] solution https://infinity-box.com/?r=100192
[01:29:18] solution https://infinity-box.com/?r=100199
[01:28:49] solution https://infinity-box.com/?r=100192
[01:28:34] solution https://infinity-box.com/?r=100192
[01:28:27] solution https://infinity-box.com/?r=100192
[01:28:17] solution https://infinity-box.com/?r=100192
[01:28:09] solution https://infinity-box.com/?r=100192
[01:27:22] solution https://infinity-box.com/?r=100192
[01:26:45] reinstall libusb
[01:26:10] solution https://infinity-box.com/?r=100192
[01:24:46] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[01:23:40] give me screenshot with wipe for free
[01:22:54] it means you must install all required drivers https://infinity-box.com/?r=43
[01:21:55] solution https://infinity-box.com/?r=100199
[01:21:00] solution https://infinity-box.com/?r=100192
[01:20:44] solution https://infinity-box.com/?r=100199
[01:20:24] solution https://infinity-box.com/?r=100199
[01:20:13] make UK option Off via DongleManager
[01:19:15] working well, tested
[01:17:56] nice
[01:16:45] solution https://infinity-box.com/?r=100192
[01:15:21] solution https://infinity-box.com/?r=100192
[01:14:49] select another loader
[01:14:27] https://infinity-box.com/news/?r=4300
[01:14:05] solution https://infinity-box.com/?r=100199
[01:13:52] look at Infinity server
[01:13:24] try latest AST
https://infinity-box.com/?r=100202
[01:12:23] Found 5 files Infinix X6816
1. infinix_x6816_test_point.jpg
2. infinix_Infinix_Hot_12_Play_NFC_X6816D_X6816D_ST683K_R_RU_221021V7
3. infinix_X6816_XQ683AMNP_R_OP_220822V875
4. infinix_x6816_MT6765_158ACDAAE34E27EA2A4178A560E08E3C
[01:12:02] download from Infinity server
[01:11:49] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[01:10:27] he has not enough experience with mobile repair
[01:09:21] solution https://infinity-box.com/?r=100199
[01:07:35] make hw test
[01:06:49] make hw test

InfinityBoxTalks 2023-04-11

[23:22:57] Hi infinity team Oppo a16k flash error solution
[22:20:05] PLEASE WHAT IS THE SOLUTION
[22:19:34] [FL]: RePartition Ok

[FL]: Flashing now...

Write: BOOT
Fail: INVALID GPT
Error: 0xC0030008 INVALID GPT
0x00000000 0x02000000
Flashing fail
It seems as something is wrong with device!
1. Check battery voltage and charge it!
2. Check is device hardware Ok
Try again
Reconnect Power/Cable now
[22:15:44] Search for preloader at support
[22:07:19] Already not success
[22:01:16] Good observation
[21:58:50] tecno bf7 boot please
[21:46:49] Try firefly
[21:24:13] This infinity team needs to find a way to make there cm2mt2 more easier. I can\'t count how many frps this tool has failed me to bypass. Sometimes I will jump from installation of one version of cm2 to another version before I will bypass frp. Today I tried bypass tecno BD3. I tried cm2mt2 v2.26, 2.28, 2.30, 2.42. all is failed failed. I watched YouTube I saw pple selecting tecon and legacy v2 but when I tried still failed no success till now
[20:58:23] X657b
Frp lock please I need your help
[20:45:08] Infinix X6816 flash files
[20:43:59] Do full flash
[20:35:00] Off uk
[20:34:01] I unlock bootloader but the same problem
[20:33:24] U install something so reflasb it b4 do unlouck bootloader
[20:31:26] Flash file need oppo a16k ver19
[20:29:59] I unlock bootloader but the same problem
[20:29:30] Vivo y81i mt6761 flash file link need
[20:27:35] Boot issue
[20:27:28] Tecno kc2j brom mood dead any solution
[20:25:22] Thanks cm2 team
[20:22:55] Anyone have mobicel oreo fdl file
[20:21:58] Tnx bro
[20:19:18] Unlock Bootloader brother
[20:18:33] How to fix it
[20:12:16] Nothing found for Tecno ki5k

If you will get the file upload it to support with iosFileUploader

[20:10:08] When i flaah it sir
[19:11:30] any solution ⁉️
[19:10:24] x6511b
[19:10:13] Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : SlowSparse Fix : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : X6511B-F6318-11.0-OP-V100-20230215.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion
[18:52:50] Infinity team, I expected a response for my complain i posted several times, even with logs, no response, Sad 😔
[18:52:01] Fdl error
[18:51:52] Still not working
[18:47:10] hello good afternoon I have problems with CM2SP2 does not enable imei options I need help
[18:18:40] LUNCH SCR. exe
[18:16:32] Mobicel oreo fdl not kicking
[18:16:13] tecno Be8 test point needed
[18:16:09] loaders was updated yesterday,\r
click here https://infinity-box.com/?r=100192
[18:16:09] SLStatus : 12
Device not locked!

Done!
Elapsed: 00:00:34

Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...


>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Pre
[18:16:09] loaders was updated yesterday,\r
click here https://infinity-box.com/?r=100192
[18:16:09] Card found : 2EB01FCF , v0154
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

[17:51:41] Oh
[17:42:14] 154.61.74.110
[17:36:32] Platform detector, say\'s unknown,I hope is not test point phone
[17:33:44] https://drive.google.com/file/d/1neWmU7G-NimaCppfhoTzoGRfJzR8tOsM/view?usp=share_link
[17:32:57] Mtk
[17:30:10] Oppo a16, what CPU, please
[17:29:00] If you can, please
[17:15:29] What is problem
[16:05:44] Found 2 files mobicel titan
1. mobicel_titan_MT6580_F2574E638AF9B725CBC6F30194B0117C
2. mobicel_titan_MT6580_0AA157C9F822242B433C12DB86833AA0

[15:33:48] Let me upload to you
[15:20:33] I\'ve download the bootpack v1.18 sp2, making 4 time now at 171mb it will stopped and write no file
[15:11:55] PTD says unknown
[15:11:55] Oppo a16 cph2269,
What CPU ?
[14:50:15] No service after unlock
[14:48:57] How to request credit refund after phone failed to work
[14:48:23] hi
[14:47:17] selec infinix SEC_NEW and v+ v- insert cable
[14:40:02] Hello, please help me boot file for Nokia C20.
[14:22:36] Nokia 7 plus diag mode
[14:13:02] After install new windows sir
[14:10:00] Vivo y20 factory reset
[14:04:30] And option spd bootloader unlock
[14:01:49] Yes cm2 team should be to update latest loader 🙌
[14:01:32] Thanks will try it 👍
[13:59:03] who can help me with tecno be8 test point for brom mode
[13:49:31] TECNO K15K mdm solution
[13:48:33] Security updated
[13:40:41] fdl not support
[13:40:24] who has the solution please
[13:39:22] in flash mode what error you getting ?
[13:38:36] Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : X6511B-F6318-11.0-OP-V78-20221102
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

Platform Version: MOCORTM_20A_W21.15.3_P14_Debug
Project Version
[13:36:25] What is the problem please
X652A infinix
[13:31:50] Some people really need to be cured stupidity
[13:31:25] Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : S663L-SE663-12.0-OP-V148-20221102.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum
[13:28:08] Infinity Team, any solution for this
[13:26:41] Diag logs ?
[13:24:38] Yes with new boot pack 1.18
[13:23:37] did you try?
[13:23:07] X6511b with v78 cm2 is supported
[13:19:33] use SP2 and send logs instead of big mouth
[13:19:00] 😁😁 dead team every day keep update helper even sp2 more than 1 year without update, shameful x6....loader not support to flash with big team
[13:14:49] Tecno le6 testpoint pls
[13:10:28] X665C test point not working can some 1 please help me out?
[13:08:55] Please is there no solution for this stuck on prepare target on itel S18 S663L?
[12:59:45] old version
[12:56:24] let me try
[12:53:38] And still stuck on \"preparing target\"???
[12:52:45] Link please to download
[12:52:11] I made backup from it coz it\'s mdm
[12:51:53] Please help me with this error
[12:50:44] Try Reading firmware from another device
[12:50:17] I got this from halal tech
[12:50:04] The Infinity team need respond to this
[12:49:37] I\'m sorry no
[12:49:29] Wish one is the best
[12:49:15] Do you have the firmware update ⁉️🤔
[12:49:07] I\'ve got the same problem with another ITEL
[12:48:43] help me with yours
[12:48:39] Still failing 😭
[12:48:01] Firmware issue
[12:46:23] need help guys
[12:45:28] Card found : 1AFFFA99 , v0155
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


VER : BP_R2.0.1
LEN : 10B7364C1 ( 4.18 GiB )
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V91-20221222

Open : X6511B-F6318-11.0-OP-V91-20221222.pac
VER : BP_R2.0.1
LEN : 4.18 GiB
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V91-20221222

Reading package ...
Read package finished!

Product Brand : Infinix
Product Device : Infinix-X6511B
Product Model : Infinix X6511B
Product Name : X651
[12:43:23] Tried still not working
[12:43:01] use the Pac file as both fdl before flash
[12:42:44] its the one i have
[12:42:27] Always stuck on Kick fdl
[12:42:15] Itel S18 S663L stuck on prepare target, any solution team?
[12:41:30] Is there any way to flash this phone pls???
[12:41:03] Stoping at kick fdl
[12:38:04] Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : X6511B-F6318-11.0-OP-V91-20221222.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921
[12:38:04] Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6511b.8a7dba6e.15b444bb
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Co
[12:38:04] loaders was updated yesterday,\r
click here https://infinity-box.com/?r=100192
[12:38:04] Card found : 1AFFFA99 , v0155
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-x6511b-f6318.8a7dba6e.d1067557
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block versi
[12:37:57] need help flashing x6511b
[12:34:03] It will work
[12:33:40] The phone it\'s v100 n dis is v022
[12:32:11] Yea mirror 1
[12:31:08] Dis ⁉️
[12:23:55] Any links to download
[12:22:49] Download Phone stock firmware and flash format
[12:21:04] X6511b it\'s easy buy any update?
[12:16:47] Found 10 files t402
1. tecno_T402_MA2425_EnFrArSwHaPo_20201012
2. tecno_T402_MA2425_EnFrArSwHaPo_20210624
3. tecno_T402_MA2425_EnAmOrTi_ET_20210810
4. tecno_T402_MA2425_EnFrSwHaArPo_DZ_20190808
5. [12:15:10] new version not good, i found same problem
[12:14:34] samsung a12 pattern unlock with cm2
[12:13:06] add tecno pop 6 go MTK..pls
[12:05:56] Still the same error
[12:05:40] I\'ve done that alread before the operation
[12:05:16] First click identify before doing any operation
[12:03:22] Please how can i fix this error, I identify the device itel s18 S663L successfully, but i got this error when i tried to read NV
[11:49:18] No test point
[11:46:35] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[11:46:01] test point?
[11:45:43] run exe and do not change anything
[11:44:49] ??
[11:43:59] H.
[11:38:11] Solution pls
[11:27:07] Test point
[11:26:57] Tecno bf7 test point please 🙏 house
[11:08:43] What\'s the solution to this bosses
[10:36:46] Please help a02/a022f network unlock is it supported
[10:29:54] Meta mode try!
[10:19:52] Infinix hot 20i repair imei solution please 🥺
[09:30:25] https://forum.infinity-box.com/viewtopic.php?t=10633
[09:29:13] solution https://infinity-box.com/?r=100192
[09:28:26] https://infinity-box.com/news/?r=4301
[09:27:52] exe ver?
[09:01:50] Able here and make sure you are using tast point
[08:55:42] hjf
[08:40:12] Hi. I need to fix imei 000000 to Sam Fold 4 , demo version with  F936BXXU1CWAC. Need price !!
[08:07:39] Tecno kg5j pls which CPU will I use
[08:04:10] Infinix x6819 emmc partition erased solution?
[08:02:48] Its stuck here
[08:01:32] Some one please helpe with this
[06:31:33] pac file link
[06:28:18] Itel p661w stops at prepare target anybody have clue on how to fix
[06:22:22] Hi how to hard reset by cm2 spd? how to boot?
[06:00:17] What\'s this error about?
[05:43:17] Pi is a new digital currency developed by Stanford PhDs, with over 35 million members worldwide. To claim your Pi, follow this link https://minepi.com/Kikiwin and use my username (Kikiwin) as your invitation code.
[05:24:10] Cm2 infinity Team
Can you add huawei Y5p sea-lx9 for network unlock
[05:20:47] KF6i
[05:16:39] Good morning house
[05:16:31] Spark 7 test point is needed
[05:15:52] Kg5j any solution yet?
[05:02:45] load pac and use
[04:59:22] miracle power tool low price powe full updet
[04:55:18] cm2 team realme c33 frp add all tool this model avleble plz urjent add
[03:44:07] Cm2 can\'t open, will only show logo and not open. My dongle is properly fix. What solution please? Help

InfinityBoxTalks 2023-04-10

[23:25:23] solution https://infinity-box.com/?r=100199
[23:19:35] My cm2 sp2 shows not responding
[23:19:34] Any help?
[22:12:04] The device is on easybuy sir
[21:45:25] There is only one loader adit boots fine it formats it fine but it\'s doing that while flashing
[21:34:07] It takes long time here and then disconnect
[21:32:51] kindly respond to this. DLIGHT M100 WIPE and FRP, here are the logs


-]Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE: PRELOADER PORT; PORT: 12
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init...
Init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
BROM: Sec Level: 0x00000000 Mode: PLAIN
VER: 0xFF BL: 0x01 [PRELOADER PORT]
AGENT: AUTO: Dlight: M100
[4d3319b0] C:\\InfinityBox\\CM2MT2\\bo
[21:32:47] Change cable and try again
[21:22:38] What is the problem with the device?
[21:19:59] -]Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE: PRELOADER PORT; PORT: 12
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init...
Init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
BROM: Sec Level: 0x00000000 Mode: PLAIN
VER: 0xFF BL: 0x01 [PRELOADER PORT]
AGENT: AUTO: Dlight: M100
[4d3319b0] C:\\InfinityBox\\CM2MT2\\boot\\Dlight\\M100\\MTK_AllInOne_DA_20190301-1249_466507.bin
Looking for su
[21:19:56] UFED 4PC 7.64✅️
PHYSICAL ANALYZER 7.61✅️ ACTIVATION READY
[21:15:30] any help please
[21:15:05] VER : BP_R1.0.0
LEN : D782E5DC ( 3.37 GiB )
CPU : P661W
VER : P661W-F3120-11.0-OP-V034-20220326_1630

VER : BP_R1.0.0
LEN : D782E5DC ( 3.37 GiB )
CPU : P661W
VER : P661W-F3120-11.0-OP-V034-20220326_1630

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : SlowSparse Fix : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VO
[21:07:59] What?
[21:07:43] what is the problem with the phone?
[21:06:12] And is dead now
[21:06:03] The phone is 15 percentage
[21:05:51] there are many loaders for this model for different HW types
if you tried only one of them - you must change your job definitely
[20:59:53] https://www.facebook.com/100090571156394/posts/135927456102959/?mibextid=iC4H3cBwLX0xIsLP
[20:58:58] it will wipe
[20:56:42] -]Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE: PRELOADER PORT; PORT: 12
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init...
Init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
BROM: Sec Level: 0x00000000 Mode: PLAIN
VER: 0xFF BL: 0x01 [PRELOADER PORT]
AGENT: AUTO: Dlight: M100
[4d3319b0] C:\\InfinityBox\\CM2MT2\\boot\\Dlight\\M100\\MTK_AllInOne_DA_20190301-1249_466507.bin
Looking for su
[20:56:42] OADER PORT]
AGENT: AUTO: Dlight: M200
[c9b55543] C:\\InfinityBox\\CM2MT2\\boot\\Dlight\\M200\\MTK_AllInOne_DA_20200604_1616_513994-sign.bin
Looking for suitable BootChain in DA...
Found MT6580
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA SEND Error: 0x00002001 SECURE BOOT: MISMATCH BOOT SIGNATURE!
PRELOADER Level : Connect device in BROM mode!
Retrieve device config...

=> Try loaders:
1. [ec563acc] 0_base/base_v1712/DA_PL.bin
2. [6544226c] 0_base/base_v1712/DA_SWSEC.bin
3. [2edda96d] 0_base/base_
[20:56:41] Status: BLANK FLASH; Boot Style: EMMC FLASH BOOT

USB: HIGH-SPEED
Boot done [0]

Reading...
Ok
Verify device config...
Ok
Loaders Ok

Backup exist: C:\\InfinityBox\\CM2MT2\\backup\\MT6580__9C87320DEA4DD09AF1DD436B75663F03
[1] Process: RESET PROTECTION...
Error: 0x0000177C SECURITY: SF CODE FORMAT FORBIDDEN
0x00000000 0x00000000
Fail to erase block
1. Select another Reset/Format mode
2. Try again
Reconnect Power/Cable now

Reset Mode: Safe (OnDevice-Like) reset by device requirements: UserData + FRP

Ope
[20:56:41] D
Boot done [0]

Reading...
Ok
Verify device config...
Ok
Loaders Ok

Backup exist: C:\\InfinityBox\\CM2MT2\\backup\\MT6580__9C87320DEA4DD09AF1DD436B75663F03
[1] Process: RESET PROTECTION...
Error: 0x0000177C SECURITY: SF CODE FORMAT FORBIDDEN
0x00000000 0x00000000
Fail to erase block
1. Select another Reset/Format mode
2. Try again
Reconnect Power/Cable now

Reset Mode: Forcedly reset UserData: Erase

Operation: Reset Settings/Format FS [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G
[20:56:40] Boot
[20:56:40] CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: 9C87320DEA4DD09AF1DD436B75663F03

DA: Status: BLANK FLASH; Boot Style: EMMC FLASH BOOT

USB: HIGH-SPEED
Boot done [0]

Reading...
Ok
SmartInfo: Fail to detect
Device is not supported or wrong operation mode selected
1. Select another Reset/Format mode
2. Try again
Reconnect Power/Cable now

Reset Mode: Safe (OnDevice) FactoryReset via WIPE

Operation: Reset Settings/Format FS [ v2.42 ]
Platform: MT
[20:56:39] 002157]
MM/YY: 7/2019
BOOT1: 0x00400000 [ 4.00 MB ]
BOOT2: 0x00400000 [ 4.00 MB ]
RPMB: 0x00400000 [ 4.00 MB ]
USER: 0x1D2000000 [ 7.28 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: 9C87320DEA4DD09AF1DD436B75663F03

DA: Status: BLANK FLASH; Boot Style: EMMC FLASH BOOT

USB: HIGH-SPEED
Boot done [0]

Reading...
Ok
SmartInfo: Fail to detect
Device is not supported or wr
[20:56:39] 00
[20:56:39] dlight m100 error for frp === [10-04-2023 23:28:39 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===
Wait...
S/N: 56DB3FE3 v0154
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.42

Firmware files: C:\\Users\\Macbook\\Desktop\\V100R001C302B101\\
Backup files: C:\\InfinityBox\\CM2MT2\\backup\\
Backup files: 12 dirs: 0
Build device list...
Init environment...
Load IDBase v124493 Ok

Check for updates...
You have latest version [2.42] installed

Telegram Channel: @Infini
[20:48:36] change the language
[20:46:29] Infinix x6511b loader not support this feature solution
[19:49:19] https://t.me/MISTA_UNLOCKING_CHANEL
[19:48:45] nani anaweza hii Oppo RENO8 5G
QUALCOMM SNAPDRAGON CHIPSET
[19:26:20] buy CM2 dongle
[19:21:30] Dont share your login details,you may block your dongle
[19:19:46] Sorry sir
[19:19:12] Ill ban you
[19:16:15] Make what brother?
[19:14:28] How do i make a
[19:13:50] He needs login credentials
[19:13:11] What do you mean?
[19:10:44] Check on me
[19:08:25] HELLOW DOES ANYONE HAVE A ACCOUNT TO RENT ME TO GET PASSWORD FROM A NOKIA
[18:47:07] Oppo A17 Kg lock solutions
[18:44:02] @kgking23 is a scammer
[18:31:09] nothing boss
[18:20:12] I use both of them the helper to enter diag and sp2 to try to format it same thing phone still asking for password 😅
[17:44:30] this device. password LOCKED. any solution from cm2
[17:43:19] Sa marche merci
[17:34:08] 👍
[16:37:23] not true
[16:31:34] Who has noticed that all the testpoints are no longer working
[16:29:35] reset here https://infinity-box.com/service/
[16:28:46] enter good name but not one letter!
[16:28:13] reboot pc
change cable
change loader
[16:27:16] do not change loaders after you run exe!
[16:26:27] Found 15 files oppo a16
1. oppo_a16k_cph2349_test_point.jpg
2. realme_Oppo_F1S_A1601EX_11_A.40_190709
3. realme_MT6750_OPPO_A1601_5.1_A1601EX_11_A.35_180114_LMY47I_oppo6750_15331
4. realme_MT6750_OPPO_A1601_5.1_A1601EX_11_A.41_19
[16:25:33] RESET PASSWORD button is here https://infinity-box.com/service/
[16:24:10] try with another loader/model selection
[16:22:33] Done?
[16:22:18] ok
[16:22:14] ok
[16:22:04] when do you see this error?
[16:09:13] yes
[16:08:40] solution https://infinity-box.com/?r=100192
[16:08:01] solution https://infinity-box.com/?r=100199
[16:06:15] Pls tecno kh7 test point
[15:31:54] try CM2SP2.exe
[15:25:02] use default loaders
[15:24:42] updates done at server core so do not write if you do not understand what to say

also open your eyes and read news https://infinity-box.com/news/
[15:22:38] If you do not know what you are doing - do not change base/model!
use default loaders!
[15:21:54] try several times
[15:20:24] server overloaded, need more time to process it
so wait
[15:04:28] 😒
[14:57:12] Can someone help me with a link to huawei lua u02 firmware, just found a lot of ads in googling for it not found on this server
[14:33:52] Found 2 files samsung t220
1. samsung_sm_t220_MT6765_EFCA52E91610201F72612537213A9505
2. samsung_sm_t220_MT6765_14716034D5825AB16816A07402396A6D

[13:00:52] 1. Remove battery. Insert battery back
2. Press and hold \'VolumeUp\' and \'VolumeDown\' keys
-> Alternative : just ONE \'VolumeUp\' or \'VolumeDown\' key
3. Insert cable

==== Wait for phone...

Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

[FL] : En
[12:50:31] Try to search it on YouTube
[12:49:23] Yeah I need help with loader, because I don\'t see in list
[12:48:04] Select correct model and loder
[12:47:07] Tecno bf7 frp help
[12:43:46] a035f u3 frp?
[12:18:28] 😁
[12:18:21] Boss
[11:53:58] 2023_____2021
[11:53:04] Card found : 2594D0A3 , v0154
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


VER : BP_R1.0.0
LEN : BB49B62D ( 2.93 GiB )
CPU : X6516
VER : X6516-SE668SABCD-SGo-GL-230208V303

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : X6516-SE668SABCD-SGo-GL-230208V303_user.
[11:51:33] Great team,,,,,,,,updates is urgently needed to be able taken the trophy as usual
[11:50:30] This is 2023 unisoc chipset phones
[11:50:00] Last release updates for sp2 was on 2021
[11:37:50] Help me ! All tecno kg5j da
[11:26:14] Nah the user created a password and he can\'t remember it it\'s simple phone not android one nokia 215 4G ta-1284
[11:23:23] its MDMed lock
[11:23:06] its MDMed lock
[11:18:39] And can i send nvram to u to check password i read about it in gsmhosting
[11:17:30] Plz help i use the last helper for spd 1.09 to remove password from nokia TA-1284 it\'s say wipe done but nothing change in phone still asking for password
[11:16:00] Help plz i have TA-1284 when i use the helper it\'s say wipe done but nothing change in phone still asking for password
[11:11:34] nokia co1 hard reset cm2
[11:02:18] Not sure
[10:59:32] use tp
[10:57:49] Tecno bf7 pop 7pro is not connecting with cm2m2 pls I need help
[10:56:48] Help i use the last version of helper v1.09 and it\'s showing wipe completed but phone still have password
Nokia TA-1284
[10:41:24] Just try but not support
[10:36:04] Hola alguien que me preste una cuenta?
[10:27:32] Someone said Yes.
[10:14:23] Not support
[10:14:16] better if you post logs
[10:13:09] Itel A58 (A661W) from Kenya 🇰🇪 King sun lock not support flashing for now .

All ways it shows FDL ERROR
[10:04:25] Chip off
[09:37:24] Clear pcb pics ?
[09:35:12] OKAY BROTHER
[09:35:11] Be7 test point help please
[09:30:19] Yes
[09:28:41] Is test point working on this patch date?
[09:13:42] Hellp me
[09:13:39] My cm2 sp2 giving this error how can I solve this issues
[09:13:32] not add
[09:04:30] Mtk spd one tool add
[09:03:41] realme c33 rmx 3624 add
[08:07:40] Nokia g10 nvm
[07:46:56] Make this https://infinity-box.com/?r=100155
[07:46:56] Dongle misconfiguration
[07:19:20] Koi bhi bhai iska solution bata sakta hai
[07:15:08] Found 4 files TA-1311
1. nokia_8000_4g_8000_4G_TA_1311_6.0.1_MSM8909_MMB29M_2020_11_24
2. nokia_8000_4g_8000_4G_TA_1311_6.0.1_MSM8909_MMB29M_11.00.17.02
3. 8000_4g_8000_4G_TA_1311_6.0.1_MSM8909_MMB29M_2020_11_24
4. 8000_4g_8000
[06:10:15] Not powering but still accepting firmware
[05:34:47] You need this ?
[05:32:08] It gets stuck here everytime while flashing realme c 35 (rmx 3511)
[05:09:51] I forgot my cm2 ID password Help
[05:06:02] আমার cm2 id pass word ভুলে গেছি হেল্প
[04:40:42] Pls note that, the username or password you get from dongle manager might not be the current details on your dongle it was just the default details, the recent user of the dongle might have change details, also note that details(username or password )change on your dongle will not reflect on dongle manager.
[04:36:44] Cm2 not support this model bro
[04:35:40] still not powering on?
[04:33:46] A662L
[04:33:32] That\'s first thing to do
[04:32:51] Phone model ?
[04:32:08] disconnect and reconnect battery. check if it powers on.
[04:12:50] I need help
[04:12:19] Please help oppo a16 flash file
[02:09:55] Yes
[02:08:51] V1000 [C960HL_WET_3GW_B1258] [MT6592] [V1.0.0] [20220421] Android 5.1 [CM2]
[02:08:47] Please
[02:08:23] hello team i need this firmware
https://support.dzgsm.com/2881-v1000-c960hl_wet_3gw_b1258-mt6592-v1.0.0-20220421-android-5.1-cm2
[02:05:57] Fail to setup hs usb port solution pls
[00:06:55] Which version do you use

InfinityBoxTalks 2023-04-09

[23:46:10] help plz
[22:37:48] problem solved thanks alot
[22:30:35] and i setup boot back 2.40
[22:30:06] whats the problem plz
[22:28:41] i read it from dongle manager
[22:28:13] => FACTORY DEFAULT Account:
- Username:..........
- Password:...........
[22:27:41] IOS

Wrong username or password
[22:15:10] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
[22:13:57] install boot pack
[22:13:40] idiots who write inbox here will be fucked and get ban
you are the next in queue
good luck!
[22:12:30] -
[22:12:21] Ещё один инбокс и тебе пизда
Ты понял, бизнесмен хуев?
[22:09:19] x665 da file plz
[22:09:01] x665 preload plz
[21:51:16] Texting from Malawi
[21:48:29] Huawei Tablet 701, network lock. Please help to fix.
[21:33:21] Ok
[21:33:02] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[21:33:02] Inbox
[21:32:27] Thnk yu
[21:32:01] x688b nvram file is needed
[21:26:14] Inbox mee
[20:38:43] Kindily lookin for itel S662L fdl file please assist
[20:11:55] Tecno BF7 Ver 351 Firmware need anyone help me
[19:15:56] Check its model under Huawei or use a DA, no need for tp
[19:12:36] No way. I ave fixed d issue
[18:29:58] Huawei LUA-L02 testpoint please help me i need to remove frp
[18:23:41] Now you\'re talking
[18:23:02] Ok Mr. Engineer!
you can wait new loaders, it comes soon as per your request
[18:21:58] My dear the CPU is sc9832E but it\'s saying Fdl file error, so if you have any solution that will kick the Fdl you bring, don\'t say use Google because internet is my hubby
[18:21:41] Wow cm team calm down
[18:16:57] omg...
open google, make search, find model with the same cpu and the same flash chip type and use that loader

are you 14 years girl with empty brain?
is tit too hard to start to think?
[18:13:26] Yes
[18:11:57] Based on this number 3 explanation, the similar model to a662L is S662L but the loader is there
[18:11:14] It MTN smart m561m3? Used cm2 sp2 and do the job
[18:05:55] Cm2 is best team
[18:05:32] solution https://infinity-box.com/?r=100192

read CAREFULLY 3.
[18:05:31] Then why you blem tool wen you are wrong?
[18:04:21] Kaios how to remove SIM LOCK PLEASE
[17:59:17] So what is the problem with the phone?
[17:57:44] I\'m using the updated loader
[17:56:12] loaders was updated yesterday,\r
click here https://infinity-box.com/?r=100192
[17:56:12] Open : A662L-SU370ABCD-12.0-GL-20230312V369_user_GsmMafia.Com.pac
VER : BP_R1.0.0
LEN : 2.36 GiB
CPU : A662LQ
VER : MocorDroid12

Reading package ...
Read package finished!


Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device
[17:56:06] Have successfully flash this a662L with Fdl file because mine refused to flash
[17:53:33] try
[17:51:53] Can CM2QLM handle Gionee s10cl?
[17:42:27] solution https://infinity-box.com/?r=100199
[17:38:31] I think some of it with latest security will identify but refused to flash
[17:34:50] 😂😂😂😂
[17:33:23] A662l fdl file please who have
[17:26:28] This is not z3x group please ask for forgiveness
[17:25:25] Plz sir give me 1 time login
[17:24:47] No sir,, a im use 2 pc one acount
[17:22:57] your IP and username sent to z3x engineers, you will get ban what ever you will use any acount.
Good luck!
[17:21:47] Any one sent me z3x free acounte for login
[16:19:12] Make this https://infinity-box.com/?r=100103
[16:18:41] the same Infinity server where you got other drivers.
Is it Ok now?
[16:10:12] I am using windows 7 sp1
[16:09:16] Install Windows 11 GSM pack
[16:08:29] My Sp2 and Mt2 are both not working, scanned for viruses and found none, report and fix( no files or reports) restart pc did nothing other tools work fine, reinstalling them did not fix the issue, with or without internet connection still the same issue. The infinity logo just appears and thats it no error messages
[15:39:20] Share link
[15:38:21] install dongle drivers!
[15:37:35] flash
[15:16:50] Have isntalled it
[15:14:20] Yes it\'s easy buy phone
[15:13:27] US T-Mobile(Sprint/MVNO) Locked Activation Policy

how can unlock
[15:13:13] install drivers
[15:12:54] solution https://infinity-box.com/?r=100199
[15:12:26] solution https://infinity-box.com/?r=100192
[15:03:10] Watch you youtube for beast gierd Lin
[15:01:25] Itel A58 still asking FDL ERROR
[14:47:22] FRESH WINDOWS AS SEEN IN PIC
[14:46:56] HELP
[14:42:51] Used cm2 and do the job
[14:26:17] loaders was updated yesterday,\r
click here https://infinity-box.com/?r=100192
[14:26:17] Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
[14:25:45] Load IDBase v312457 Ok
Operation : SP Unlock [ v2.37 ]
Mode: META

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port (COM19)
MODE: BOOTROM
PORT: 19
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: MEID: 0645A00EE28CFAD9C13DE0D496B6DDB3
BROM: SecLevel: 0x000000E7
BR
[14:22:02] Okay but am suffering the proper IMEI writing tool
[14:21:18] Write IMEI
[14:13:07] Hie Infinity Team!

Please i have received Tecno Spark 5 (TECNO KD7H) CPU MTK but IMEI null, how can I REPAIR it?
[14:13:02] phone is okay.
let me re-run windows 10.
thanks for support
[14:11:48] you are slow
year ago
[14:10:33] No idea then
Is phone completely Ok?
[13:34:40] Is the phone morgage locked
[13:27:37] Itel A58 (A661w) added?
[13:27:30] Bf7 available
[13:25:33] Load HW info...
SRAM: 0x00020000 [ 128.00 Kb ]
DRAM: 0x40000000 [ 1.00 Gb ]

EMMC CID: 150100464536324D4200CC40D26D971F
VEN: Samsung OEM: 256 ID: 464536324D42 [FE62MB] PRV: 0x00
SNN: 3426800237 [0xCC40D26D]
MM/YY: 9/2020
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0x3AB400000 [ 14.68 Gb ]

CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0699
CODE: Zion
TYPE: MODERN [RAPHAEL]
RNID: 162F290BBE4770D64B05B58F93F
[13:25:33] Analyze modem...
TITAN_A01CORE_Q0MP1_K39TV1_BSP_1G_MDBIN_PCB01_MT6739_S00.MOLY_LR12A_R3_TC10_6M_PR_A01_SP_V2_P15
Analyze nvram...
NVRAM: Items: 0xA0 Size: 0x08B8C6 State: Ok
WiFi MAC: AA0036004400
BlTh MAC: 000046000001
IMEI[1]: 358491696498723
IMEI[2]: 358491696498723
Verify device config...
Finished
Backup to C:\\InfinityBox\\CM2MT2\\backup\\MT6739__5F959B7B4BD850A72B98ED10F7020039\\
Items to check: 20
Read [31] NVRAM
Read [12] NVDATA
ZERO CONTENT file [64.00 Mb] deleted: C:\\InfinityBox\\CM2MT2\\back
[13:25:32] here


=== [09-04-2023 16:15:32 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===
Wait...
S/N: 601556E4 v0155
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.43b2

Backup files: C:\\InfinityBox\\CM2MT2\\backup\\
Backup files: 0 dirs: 0
Build device list...
Scan 4 profiles...
Init environment...
Load IDBase v124493 Ok

Check for updates...
Socket Error # 11001
Host not found.
Can not connect. Disable Antivirus and Firewall

Wrong Username or Password - set it at [Settings|Account] to get server access



[13:09:06] try https://infinity-box.com/?r=100202
[13:08:43] 1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
[remember Vol+ | Vol-]Waiting for device connection...

PTFN: MediaTek USB Port (COM4)
MODE: BOOTROM; PORT: 4
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
CODE: Zion
TYPE: MODERN [RAPHAEL]
MEID: 5F959B7B4BD850A72B98ED10F7020039
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: 4CFB9C265D
[13:07:25] it changed. ok.
[13:04:28] try https://infinity-box.com/?r=100202

and be noted, chat policy got changed, I have no time for selfies any more.
read https://forum.infinity-box.com/viewtopic.php?t=1828
[12:26:09] SIGNED in as ADMIN. firewall Disabled. still READ FW operation can\'t go through.
[12:14:43] Bro, where are u from?
Have u tried to check from Infinity support area?
[12:08:02] BF7
BE8
TEST POINT NEED🙏🙏🙏
[11:39:39] reboot PC
Sign In to PC as Administrator
try again

waiting
[11:34:09] Android 10
[11:34:00] Okay
[11:33:49] What is this device Android version?
[11:32:52] keyword was \"good\"
anyway leave it for now, relax and wait
[11:32:39] Read: cache.img
Disk free space: 194.12 Gb
Can not create file. Disk full or Disk access blocked?
1. Disable Antivirus or add CM2MT2 to exclude list!
2. Check UAC settings in Control Panel
3. Sign In to PC as Administrator
4. Check free disk space
Reconnect Power/Cable now
[11:32:39] SM A013G READ FW failed. find the attached LOGS

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
[remember Vol+ | Vol-]Waiting for device connection...

PTFN: MediaTek USB Port (COM4)
MODE: BOOTROM; PORT: 4
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
CODE: Zion
TYPE: MODERN [RAPHAEL]
MEID: 5F959B7B4BD850A72B98ED10F7020039
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT

[11:23:28] send good quality pcb photo or find ISP pinout
[11:19:34] Sorry its i can not find....
[11:19:04] Same applies....i can find test point for coolpad cp8675-hd. Can someone post image with it, please.
[11:13:51] Can find test point
[11:12:43] Used taste point
[11:10:07] btw, do you have any experience with google search?
[11:09:44] Cpu?
[11:09:44] https://forum.infinity-box.com/viewtopic.php?t=5624
[10:57:37] Coolpad 8675 privacy protection (anti-theft).
Da sent......
Failed!
How to remove?
[09:52:45] Found 14 files tecno BE6
1. tecno_cx_h501s_MT6755_3C7208D2D912D6B11CE7AE0B9BE6335D
2. tecno_ch9_MT6781_BE631BC30F2ECD97604726756D0530DD
3. tecno_in6_MT6763_65BE6CA08B390FB57741F61015916620
4. tecno_kc1h_h6114c_MT6761_C2AADA0AE1A9
[09:28:59] Infinix x657 mdm file anyone with it
[09:06:27] Then wats the next step i dont see s662l on the bootpack for itel
[08:56:33] read https://infinity-box.com/?r=100199
[08:40:22] here https://infinity-box.com/support/
[08:34:00] MANY THANKS TEAM
[08:33:44] Trying it now
[08:31:09] https://dl1.infinity-box.com/00/pub/?dir=software/
[08:27:26] Who else have tried this v1.18 boot pack with those stubborn x6511b, I\'ve tried it but no success, the second to the last can identify the device but can\'t flash or flash format
[08:26:25] Hie Infinity team!

May someone please share link of CM2MKT2 latest boot pack
[08:19:54] very nice
it means you can copy/paste here sw log text via your PC and telegram
make it
[08:19:25] you are right, everyone who has limited reading skills have such problem.
I have an advice for you but you must read, it\'s hard but you can try https://infinity-box.com/?r=100192
[08:17:22] run Infinity cm2sp2.exe
[08:15:51] Still not working
[08:15:07] It seems everyone having issues with x6511b please look into it
[08:12:03] yes. telegram desktop is installed.
[08:09:14] A102u  bit 6 bit 7 bit 9 sim unlock . Sombody can help me.
Plz i no need any scammer
[08:04:27] Spd
[08:03:43] Spd
[07:55:56] cpu?
[07:55:45] repair hw or flash with good fw
[07:27:29] Help remove frp android 12 on itel s18pro
[07:12:59] When the phone does not swish on?
[07:11:34] The boot is made when swishing on?
[07:02:40] https://infinity-box.com/?r=100186
[07:01:12] if you need answer tell - do you have PC with telegram installed?
[06:53:44] How it works
[06:42:02] line 1. https://infinity-box.com/price/
[06:41:25] Cm2 one credit it cost how much
[06:39:43] https://infinity-box.com/news/?r=4300
[06:35:36] Infinity #CM2SP2 boot-pack v1.18 with updated loaders https://infinity-box.com/?r=42

AndroidP, BQ, g-tab, Hisense, Huawei, Infinix, Irbis, iTel, Jio, Lava, Mobicel, Motorola, QMobile, Realme, Samsung, Symphony, Walton, ZTE
[06:19:06] I just did the formatting. I had windows 10 Running.
[06:06:03] Hmmm this error just format your PC
[06:03:41] ☝️
[06:01:14] thanks work again
[06:00:46] I\'ve been encountering this issues for windows 7. I\'m trying to READ FW
ANY SOLUTION?
I\'ve already disabled anti virus
[05:58:26] Reinstall windows bro
[05:55:27] Scan you PC and start the process
[05:50:10] Still not working
[05:49:30] Its installed sir
[05:40:29] English brother
[05:35:39] Install libusb
[05:31:56] Disable you antivirus
[05:26:21] And i do not want to format d laptop
[05:25:43] I did dat but still didnt work
[05:07:10] Uninstall it from control panel then come back to drive c partition find infinity folder open and delete cm2 mt2 restart your PC install again job done ✅
[04:55:51] dm
[04:49:04] Please help. I cant open my cm2mt2. I have uninstalled and installed a new one but still not opening.
[04:46:47] Hi
[03:43:03] what language did i chat in then
[03:38:52] hi,i want to create cm helper account
[00:41:30] Nothing found for x6517

If you will get the file upload it to support with iosFileUploader

[00:26:22] I\'ve seen the update but no boot flash this phone I\'ll still try

InfinityBoxTalks 2023-04-08

[23:09:44] huawei y5p dra lx9 network unlock cm2 is it supported
[23:06:59] Work on great team
[23:06:27] Not supported by cm2
[23:05:43] Admin,,,,,,,,,infinix X6516
[23:04:16] I just see boot pack v1.18 let me check it out
[22:56:50] Nothing found for Fdl x6511b

If you will get the file upload it to support with iosFileUploader

[22:56:26] Found 2 files x6511b
1. infinix_X6511B_F6318_11.0_OP_V026_20211027
2. infinix_X6511B_F6318_11.0_OP_V022_20210926

[22:55:31] Found 4 files a037u
1. samsung_sm_a037u_test_point.jpg
2. samsung_sm_a037u_MT6765_samsung_SM_A037U_11_RP1A.200720.012.A037USQS2AVD3_RP1A.200720.012_a03su
3. samsung_sm_a037u_MT6765_99D42A689457D44A3C7265A60A1E878E
4. samsung_sm_a
[22:51:16] Which loader to use in this phone?
[22:49:33] loaders was updated yesterday,\r
click here https://infinity-box.com/?r=100192
[22:49:33] Card found : 98F3AC46 , v0154
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...


>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off devi
[22:40:11] Make sure PC is connected to internet and activation not expired
[22:39:25] I\'ve tried this before no success
[22:39:03] Link\'s please
[22:38:46] Where I\'ll see this files download
[22:34:57] Use pac file with v022
[22:31:13] result?
[22:26:46] ok friend, here are your files
[22:25:52] i am
[22:25:08] or use search in support forum, there are many reports and examples there
[22:24:51] try and see
[22:22:34] Without lose Data ?
[22:22:12] Infinity CM2MT2.exe
[22:21:25] have you tried to make anything?
[22:21:06] Wow to unlock Tecno cc7 without lose Data ? What tool use ?
[22:20:41] Are you blind?
[22:20:31] Which loader will flash x6511b v78 or a662L
[22:19:57] click here now https://forum.infinity-box.com/viewtopic.php?t=5624
[22:18:56] I no just started this work, I make use of all this channels, but there\'s no success for this two phones I just mentioned, if you have any Fdl file or any boot that will work on them drop it here I still have the phone\'s with me
[22:13:25] read this, my lazy friend https://forum.infinity-box.com/viewtopic.php?t=5624
[22:12:48] use search here
use search in support forum
use youtube search
Infinity youtube channel
read support forum
[22:11:30] sory sor ....i have anser abot crack tool
[22:00:24] Which process I understand, for the same phone I\'ve flashed several times before them upgrade it to higher version, no problem I agreed with you on what you said then teach me how I can flash the phone with cm2 I\'m ready to learn
[21:56:48] infinity server
[21:56:35] no need. you have zero experience and you do not understand the process so just eave it.
you must install boot pack and use different loaders

lazy people say \"not work\"m serious people do the job. make your choice
[21:55:19] Cm2 qualcomm driver
[21:55:13] I\'ll send it as you requested
[21:54:07] do you know what is sw log?
[21:53:38] X6511b Fdl file error, A662L the same problem
[21:53:15] Just a friendly advice - if you don\'t send log text - be silent
[21:49:41] you must send sw log text and phone problem
you have 15 min
after that your stupid posts will be deleted
[21:24:48] http://dl1.infinity-box.com/00/?dir=nvram/infinix/x624/
[21:06:01] Pls urgent
[21:05:55] Pls who have infinix 624 nvram
[21:03:05] try it and send result here
[21:02:42] He has big problem with reading, leave it
[21:02:12] Are you Ok?
stop spam
you must answer to forum about your crack attempts.
[20:34:31] Qualcomm
[20:34:21] Device chipset is qualcome
[20:34:01] F-04J DOCOMO FUJITSU
anyone who can do frp bypass or tell me which tool to use
[20:12:04] Bhai iska koi solution mila
[19:35:18] Try it and feedback
[19:34:10] Update frimwer VA dangle manager
[19:26:53] i have post before 3days ago not solved my problem i dont now about shering dongle only i install from google crack now my dongle is not work
[19:26:00] Anybody use quick k8 hot gun?? Pls review!!
[19:14:03] infinix x665e suppport cm2 frp and repair???
Any one helpme Brothers!!!
[19:13:40] No boss...am looking for solution if u got
[19:00:37] Brother you said kg5j tp not working ? Do you have solution for that???
[18:54:58] Check testpoint any one dat gat yustim dat mine
[18:54:22] 😒😒 for wat
[18:52:31] what problems
[18:52:03] Make this https://infinity-box.com/?r=100155
[18:52:03] Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Box/Dongle misconfiguration
Diagnostic code: 67
05-03-2023 11:32:50
Username:
==> Search for \"report.log\" in C:\\Users\\GSM ALI\\Downloads\\Compressed\\DongleManager\\
==> Search for \"report.log\" in c:\\InfinityBox\\
==> Search for \"report.log\" in c:\\Program Files\\
==> Search for \"report.log\" in d:\\Program Files\\
==> Search for \"report.log\" in c:\\Program Files (x86)\\
Found files: 0
==> Search for \"fault.bin\" in C:\\Users\\GSM ALI\\Downloads\\Compressed\\DongleMana
[18:38:46] Fast send you clear video steps by step for prov
[18:33:52] No ....a lot b4 dis ....am among d pipu dat drop d testpoint even😒😒
[18:31:38] You can ask from hmd group
[18:30:35] All windows 7.8.8.1 10 or 11 work
[18:28:27] No need of tp brother just install latest bootpack and select correct model it work
[18:13:43] Okay
[17:46:23] send good quality pcb photo
[17:45:49] Thank you for good idea!
[17:45:35] try to select another loaders
[17:45:02] Don\'t waste my time please
open your eyes and read sw log text
Operation : SP Unlock [ v2.37 ]
Mode: FLASH <==
[17:44:13] file?
[17:40:02] https://infinity-box.com/support/
[17:16:09] If not, please can some one provide a clean RPMB for SM 125f?
[16:33:30] Please, in which partition RPMB is located in Samsung A125F
[15:58:30] Realme RMX3690 frp file please
[15:55:30] Good kindly send a dm
[15:53:34] Tecno BF7 testpoint needed
[15:51:42] It\'s checked
[15:48:19] can\'t enter fast boot. 8f its MDMed locked
[15:01:39] to
[15:01:17] big challenge for our great team
[15:00:15] admin help out urgently
[14:59:28] Device Connected!
BootVersion : SPRD3
Boot : PAC : X6516-SE668SABCD-SGo-GL-230208V303_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Wipe failed!

Reconnect Power/Cable!
[14:58:47] Device Connected!
BootVersion : SPRD3
Boot : PAC : X6516-SE668SABCD-SGo-GL-230208V303_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Wipe Ok : Forced Wipe
Wipe Ok : Forced Wipe
[14:57:36] Device Connected!
BootVersion : SPRD3
Boot : PAC : X6516-SE668SABCD-SGo-GL-230208V303_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!



- > INFO : Remove cable from device to switch it off!

Done!

[14:55:24] What about unisonc SPD bootloader unlock in next update CM2SP2
[14:53:41] Hello support
[14:41:19] Impossible to hard reset use hmd via fastboot
[14:39:36] Nokia 1.4 hard reset
[14:37:30] Anyone with infinix x6511B tpoint
[14:31:28] Hi I need best window 10 for cm2 please link in boxes 🎁
[14:13:06] link please
[14:12:35] whre can i get latest version
[14:07:54] Use cm2sp helper
[14:06:29] hi please assist with nokia c20 hard reset
[14:03:44] Make this https://infinity-box.com/?r=100155
[14:03:36] Make this https://infinity-box.com/?r=100155
[14:03:04] what i do now
[13:51:50] Same problem
[13:33:43] https://forum.gsmhosting.com/vbb/f296/infinix-x6825-repair-imei-done-3145958/
[13:33:35] https://forum.gsmhosting.com/vbb/f296/itel-a631w-repair-imei-done-3147146/
[13:32:51] https://forum.gsmhosting.com/vbb/f296/infinix-hot-12i-x665-repair-imei-done-3148206/
[13:32:39] https://forum.gsmhosting.com/vbb/f296/tecno-ke5-repair-imei-done-3147568/
[13:32:30] https://forum.gsmhosting.com/vbb/f296/infinix-hot-12i-x665-repair-imei-done-3148206/
[13:32:22] https://forum.gsmhosting.com/vbb/f296/infinix-pr652b-format-fs-reset-settings-done-3147567/
[13:32:13] https://forum.gsmhosting.com/vbb/f296/infinix-pr652b-repair-imei-done-3147566/
[13:27:32] Anyone with infinix x6511B tpoint
[13:24:47] https://infinity-box.com/service/
[13:24:27] use another firmware
[13:23:05] Is it your first kg5j?
[13:22:33] in most cases this type of devices should be also flashed with debranded firmware
[13:21:39] try built-in loaders first
and after that try boot-pack loaders for models similar to yours
[13:20:49] select loader for another model, similar to yours

install https://infinity-box.com/news/?r=4294
try loaders for different models
[13:20:25] make META box checked
[13:18:38] try with cm2mt2
[13:15:23] https://infinity-box.com/service/
[13:14:28] your posts in this chat are useless for respected engineers
you will get ban here in 15 minutes
Good luck!
[12:57:31] Inbox for permanent solution
[12:55:59] Samsung Galaxy A03 SPD
[12:48:01] Login ?
[12:42:20] Problem
[12:42:09] Mi 10 t qualcom
[12:41:57] Hi
[12:40:24] network lock
[12:40:16] tecno RC6
[12:40:03] 1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 171 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 0699
BB_CPU_NME : [MediaTek] MTxxx
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0002
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0003
PreLoader : NOT Active [ Erased ]
BootLdrSS : LOCKED with CERT
Processing DA stage

[DA_ERROR] : Correct BOOT CONFIGURATION not found for t
[12:39:34] [DA_ERROR] : Correct BOOT CONFIGURATION not found for target!
Try Re-Install CM2MTK module!
[12:07:37] Load IDBase v312457 Ok
Operation : SP Unlock [ v2.37 ]
Mode: FLASH

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port (COM19)
MODE: BOOTROM
PORT: 19
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: MEID: 0645A00EE28CFAD9C13DE0D496B6DDB3
BROM: SecLevel: 0x000000E7
B
[12:06:13] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[12:06:12] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[12:03:03] I have
[11:53:16] Which phone ?
Model
And info
[11:44:02] Anyone might be of help
[11:43:03] Admin please 🙏, I need fdl file that can boot this \'\'unisoc SC9863A1\'\'???????
[11:06:25] So cm2 never start flashing x6511b latest version
[10:49:41] Redmi A1 Network locked
Android version 12
MTK

Any solution?
[10:29:34] Can I unlock this phone with cm2
Cpu mt6761
Carrier tracfone
[10:24:15] Nothing found for x6511b nvram

If you will get the file upload it to support with iosFileUploader

[10:23:29] 👆
[10:21:28] Yes
[10:21:20] And besides are you good in hardware
[10:20:11] Need this file
[10:19:33] https://support.hiunlock.com/index.php?a=downloads&b=file&id=13181&fbclid=IwAR2FFL-FC3ewQt8QBWUqw7UhmVVeuIhhzWRKvujl8gXcbPjXkyUzjcq_rRU
[10:16:05] Kk hold let me open the phone
[10:15:42] Can I see motherboard pics
[10:15:30] Here is chat for engineers but not for 14 years old girls
[10:13:43] Hello please I need help with Tecno BF7 test point
[10:10:39] Help my
[08:27:49] Kg5j not connecting with cm2 with testpoint any solution anybody please
[08:26:10] Yes it\'s active ✅
[08:25:04] How please
[08:23:10] use Infinity CM2MT2.exe
[08:22:14] good
[08:21:55] Ls
[08:21:53] Please house kg5j not coonecting with testpoint any body with idea And solution
[08:21:25] nokia test point 2.4
[08:20:00] Moto G73 frp
[06:29:56] Tecno spark go
[06:29:43] Kg5m test point plz
[05:49:54] i have already post in infinity martiwe
[05:45:01] Gsmmafia .com download file from there and flash it
[04:51:17] I want to fix the oppo A16 CPH2269 device, it was locked with a password and Frp, and after deleting it, it entered MTK Port mode, and I want to flash the entire device. What is the solution? Please help
[04:49:16] CHP2269
[04:48:09] How fix Oppo A16
[04:47:52] initializing usb... ok waiting for device... com21 [bootrom:0e8d:0003] bypassing authentication... ok analyzing... preloader_oppo6765.bin [mt6765:5:912] [cust] vendor : oppo/realme handshaking... ok reading hardware info... ok hardware : mt6765 [helio g25|g35|p35] 0766 8a00 ca00 0000 security config : scb sla daa meid : bae762e779bce5726c3d3dede740b639 sending download-agent... ok syncing with target... ok booting device... fail ext.ram : no response from device! please use custom preloader to boot!
[04:04:34] ❓
[01:58:40] FL]: Pre-Erase
Erase: 0x0000000000000000 0x0000000000108000
Erase: 0x0000000000408000 0x0000000004C1A000
Erase: 0x0000000007022000 0x00000000047DE000
Erase: 0x000000000F800000 0x000000000BB00000
Erase: 0x000000001F300000 0x00000001EED00000

[FL]: RePartition
[FL]: RePartition Ok

[FL]: Flashing now...

Write: PRELOADER
Fail: SEC: PL VFY FAIL
Error: 0xC0020006 SEC: PL VFY FAIL
0x00000000 0x0003D06C
Flashing fail
It seems as something is wrong with device!
1. Check battery voltage and charge it!
2. Ch
[01:58:40] After change CPU
[01:57:49] FL]: Pre-Erase
Erase: 0x0000000000000000 0x0000000000108000
Erase: 0x0000000000408000 0x0000000004C1A000
Erase: 0x0000000007022000 0x00000000047DE000
Erase: 0x000000000F800000 0x000000000BB00000
Erase: 0x000000001F300000 0x00000001EED00000

[FL]: RePartition
[FL]: RePartition Ok

[FL]: Flashing now...

Write: PRELOADER
Fail: SEC: PL VFY FAIL
Error: 0xC0020006 SEC: PL VFY FAIL
0x00000000 0x0003D06C
Flashing fail
It seems as something is wrong with device!
1. Check battery voltage and charge it!
2. Ch
[01:48:58] Write: PRELOADER
Fail: SEC: PL VFY FAIL
Error: 0xC0020006 SEC: PL VFY FAIL
0x00000000 0x0003D06C
Flashing fail
It seems as something is wrong with device!
1. Check battery voltage and charge it!
2. Check is device hardware Ok
Try again
Reconnect Power/Cable now
[00:18:37] It is the brother of this phone model
[00:18:20] Wiko
W-v730
Wiko View 4 Lite
[00:06:30] Phone model
[00:03:27] Please tell me what is the problem
[00:02:29] Hello, I flashed this phone, now the screen does not turn on
[00:01:42] I help hard reset Nokia T A 1383

InfinityBoxTalks 2023-04-07

[23:56:59] Login ?
[23:54:43] Не подаём по субботам, шабат.
[23:53:23] Help me
[23:53:16] Hi
[22:32:10] i have already post registered in martivwe fourm
[22:29:44] what i do now
[22:28:38] waiting for software log text from you next time
[22:28:03] Ok sorry bro
[22:27:29] Good advice
[22:23:26] your selfie is bad
read again
[21:59:18] Maybe
[21:58:47] friend, I have a good suggestion for you
please read it very carefully

is you say that something is not supported ou MUST send sw ;og text
if you don\'t send sw log text I will ban you next time because your wrds are useless and you are making something wrong.

I hope you undertand my idea my friend
[21:56:37] send text
[21:53:55] Many phone have using unisoc doesn\'t supported include x6511b and s18 itel an more devices please make update please and please try ur best
[21:41:51] Problem in emmc???
[21:23:16] Same error even if I use test point
[21:22:48] Also failed
[21:04:38] Ok, thanks sir
[20:59:51] do not use sharing sw
Make this https://infinity-box.com/?r=100103
[20:59:08] Send sw log text
[20:58:50] It’s not open
[20:58:29] try AST https://infinity-box.com/?r=100202
[20:57:12] select another base/DA
[20:56:29] try to find people who have experience with this unit, they can teach you
[20:55:34] check hardware
[20:54:24] https://infinity-box.com/support/
[20:53:45] tp?
[20:52:37] try cm2sp2.exe
[20:51:06] what was the problem before flash?
[20:50:03] N make sure ur subscription is active n user name plus password is set
[20:49:42] Make this https://infinity-box.com/?r=100155
[20:49:26] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[20:49:15] Use the firmware as the fdl
[20:49:12] Make this https://infinity-box.com/?r=100155
[20:48:39] what is your problem?
[20:48:17] what is not working means?
[20:47:50] unsupported unit
[20:38:00] ??
[20:36:13] Guys
[20:36:10] Any solution
[20:34:13] And spd2 not working
[20:30:42] Why cm2 not showing sc7731e chipset
[18:48:05] Smart 6 and s18
[18:02:50] What devices??
[17:38:30] Admin what happened with SPD TOOL NOT ON MORE DEVICE
[17:27:55] connect via tp
[17:24:51] Come for solution
[17:22:51] Just cleared kg7h frp now it keeps restarting itself and not its not a switch issue.
[16:55:23] select model and tick preloader then check
[16:50:35] Kg5p
[16:46:42] which 📳
[16:46:19] bro mobile
[16:44:15] Help 🙏
[16:35:10] Help me fix this phone
[16:34:34] my cm2 block with crack tool pls help
[16:14:41] i download it bt not working or is there a process for it?
[16:12:10] how to get the old device file dat will work
[16:05:43] hey! can someone here help me to solve this problem on nokia c20..
[16:00:31] Hi
[15:29:16] https://www.youtube.com/watch?v=MR5xMdjIz3Y
[15:19:54] Try so many Fdl still no support for it, but the older device is booting?
[15:17:42] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[15:17:42] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : Infinix : X6511B Sending Init Boot ... Boot sent! Kick FDL ... >>> ERROR : FDL NOT started! >>> Error : Fail to boot FDL! >>> Unsupported device with selected fdl or settings! Change settings! Reconnect Power/Cable!

No boot support for latest infinix x6511b but the older device is booting.
[15:16:44] not working
[15:09:57] But is easybuy but customer forget code not mdm remote
[15:09:26] Just factory reset and frp
[15:08:36] What are you trying to do?
[15:07:57] Infix x6511g
[15:07:43] Cm2
[15:07:27] What tool are you using
[15:07:24] A125f test point not working, mdm block in download mode kg status normal, anyway forward guys?
[15:00:27] How to use bro it s just jumping Brom
[14:48:40] No need test point dear use infinix after sale software just connect it without any key then use meta mode with cm2
[14:42:51] Infinix x6511g test point anybody
[14:42:18] Infinix Note 8i X683
Firmware Upload Done
[14:33:31] Found 4 files maxtron
1. Maxtron_DEWAV60D_11B_E3368_PCB01_gprs_MT6260_S00.E3368_DE33681_MAXTRON_L102
2. MTK_MT6225_CBM68C2_08B_GEMINI_PCB01_GPRS_MT6225_S00.CBM68C2_TP_V41_2010_06_04_MAXTRON_MG175_16m_En_Id_Cn.B0M
3. MTK_MT6253_HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.X239_7A_QVGA_MAXTRON_V18_1105
[14:18:19] Please I have this challenge on BE6, I have backup of the same phone, after format and flash phone doesn\'t boot up. \"Dm verity corrupt\" I downloaded same build file, that\'s the error I\'m getting
[14:03:04] Hi Williams did you fixed? I have exactly same problem with mine...
[14:02:37] Hi Williams did you fixed? I have exactly same problem with mine...
[14:01:16] Hi Elisabeth, may perhaps you help me about which software to use and where to find it, to upgrade the firmware of a Nokia 3310 and where to find the proper firmware file? Sorry for many questions. Giorgio
[13:56:19] Which software can I use to flash Nokia 3310 firmware?
[13:55:45] How to find firmware file for Nokia 3310?
[13:47:46] ??
[13:45:25] I want to flash mobicell x4 it’s fail
[13:44:52] Hy
[13:36:47] https://romprovider.com/infinix-smart-6-x6511b-firmware-support/?amp=1
[13:35:19] Cm2 website
[13:33:37] Salam Arkadaslar nokia 105 rm1034 kim yardimci olur dil yazmaq Türk Azerbaycan
[13:20:05] tecno spark8 dm-verification
[12:25:56] Infinix x665C Test-Point plz
[11:59:41] even if i put force brom still the same thing
[11:58:52] Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE: PRELOADER PORT; PORT: 4
Waiting BOOT ack...
PRELOADER: ACK confirm FAIL
BROM: Init...
Init passed
BROM: Enforcing BootROM
Enforcing Fail. Skip
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0x
[11:58:27] faile
[11:46:45] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[11:46:45] Operation: Change KG state [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE: PRELOADER PORT; PORT: 4
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init...
Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]

[11:46:26] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[11:46:26] Operation: Change KG state [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE: PRELOADER PORT; PORT: 4
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init...
Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]

[11:41:31] X6511B does it have test point?
[11:41:02] X6511B does it have text point?
[11:22:41] Please someone know how can I updated the firmware of Nokia 3310 2017?
[10:58:43] Where can i get the firmare
[10:50:14] Please . Samsung e1170i
[10:49:57] Hi CSC firmware OXFKE1 need
[10:21:45] Use UMT
[10:21:19] Yes
[10:21:12] Sm a10s?
[10:20:28] A107f
[10:20:12] Model
[10:19:42] Please help
[10:18:33] Even if I make test point still the same
[10:18:25] Am trying to set Samsung kg complete but it shows that error any solution
[10:02:29] Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:14
[10:01:47] Write SL RPL procedure procedure started...

Read Lock Info
Locked to Retevision Movil Amena;Spain
Unlocking...
All done !
[10:01:02] Reading Phone Info....
SW ver : V 04.51 12-10-06 RH-86 (c) Nokia.
IMEI : 353968013523445
PPM : V 04.51
12-10-06
RH-86_87
(c) Nokia.
AG
CNT : Content: ora_es
V 04.51
12-10-06
RH-86_87
(c) Nokia.

DSP Ver : 5w45.v42
PCode : 0540406
BPCode : 0530409
HWID : 0603
LCDVer : ELBE
IMEI : 353968013523445
Sl Conf : 001-01-00000000000
Sl Prof : 000000000001000-B
Sl Aux : 000B5555
Hw Sig : 2C7A5F9EE8FF64CB
Country : Test SIM (Open
[09:33:07] Nothing found for Lenovo K14 plus

If you will get the file upload it to support with iosFileUploader

[09:32:19] Found 12 files Tecno B1C
1. recent_MT6580_TECNO_MOBILE_LIMITED_TECNO_B1c_11_B1c_VP559A_RGo_OP_220926V8_RP1A.200720.011_TECNO_B1c
2. tecno_MT6735_TECNO_TECNO_C9_6.0_C9_H535B1C1_M_161222V88
3. safaricom_tecno_n9s_n9s_n9s_wq500t_tecno_n9s_MT6735_6B998EC9B2E4CDC60625F63DEB1CFA6E
4. [09:31:58] Found 38 files B1C, search limit is 20 files per server
1. nokia_RM_1027_02040.00021.15235.50009_059W245_8B1C2B2B_RM1027_02040.00021.15235.50009_RETAIL_prod_signed_1007_0268D3_000_HK.ffu
2. nokia_RM_1011_20.10.11_059V8L7_B82B1C3D_RM1011_059V8L7_20.10.11_018.vpl
3. nokia_RM_1012_10.01.11_059V6L6_AB
[09:31:36] Shows error or what
[09:13:42] Used cm2
[09:06:40] Plz help Redmi 10A baseband unknow
[09:02:09] A03s nvram somebody help
[08:59:34] Nokia C20 TA-1352 fdl file Needed for frp Remover
[08:59:32] Nokia C20 TA-1352 fdl file Needed for frp Remover
[06:50:39] https://youtu.be/7oD8K4Oxo9g
[06:16:16] Any solution
[06:15:02] Brom mode dead
[06:14:54] Oppo A16k flash error
[06:11:39] What is the build number of the phone?
[05:17:45] It has NEVER worked for me ,is there another tp for this model?
[04:54:25] انضم إلي في Bybit لنربح بطاقات الخدش معًا! استعد للفوز بجهاز iPhone 14 Pro Max بقيمة 1,099 دولار وجوائز أخرى رائعة. https://www.bybit.com/ar-sa/promo/global/referral-scratch-and-win?ref=Q8P3P0
https://www.bybit.com/ar-sa/promo/global/referral-scratch-and-win?ref=Q8P3P0
[04:49:33] Use firmware with v022 it will boot device n flash without errors
[04:48:31] Patch dm-verity via unlocktool
[04:00:14] 😂😂😂😂
[03:59:58] Tecno camon 19 ci6 this test point not working any solution please
[03:59:24] Well done thanks
[03:46:09] Nokia C20 TA-1352 fdl file Needed for frp Remover
[03:46:03] Nokia C20 TA-1352 fdl file Needed for frp Remover
[03:30:07] Infinix Hot 20i X665E test point
[03:09:19] You are the one that did not follow simple instructions.bootloader must be unlocked before performing such an action.
[03:00:11] SPD null imei repair possible?
[02:55:00] Infinix hot 20t x665c test point
[02:31:40] It\'s no longer recognize on pc
[02:31:23] Please someone should help me
[02:31:12] After I follow this method
[02:30:59] This is what\'s showing pls help
[02:21:54] This killed a phone
[00:06:53] Please cm2 support help us and add patched dm-veriy option on cm2mt2 please in your next update

InfinityBoxTalks 2023-04-06

[23:27:52] This is fake, if adds there no need
[23:06:34] https://givvy-videos.app.link/pKmjnbfXMyb
[22:50:30] I tried it, not working
[22:22:55] Lenovo k14 Plus firmware needed
[22:21:03] Realme K14 Plus firmware needed
[22:20:50] #Anyone
[22:19:48] Realme K14 Plus firmware needed
[22:08:08] Okay
[21:59:17] Please Tecno b1c file needed
[21:48:29] Cm2 mediatek button phone cannot connect solution pls
[21:42:36] https://infinity-box.com/support/
[21:42:21] Send sw log text
[21:41:42] Found 17 files tecno ka7
1. recent_MT6580_TECNO_MOBILE_LIMITED_TECNO_KA7O_8.1.0_KA7O_H8024DEFGH_O_200618V302_O11019_TECNO_KA7_O
2. tecno_KA7O_MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V175_1_wg.MT6580_S01_alps_trunk_o1.bsp_W17.44.ka7_h8024
3. tecno_KA7O_H8024DEFGH_O_190513V185_019_CNO_KA7_O_MT6580
[21:41:17] select loader for another model, similar to yours
[21:40:44] good firmware
[20:45:53] The solution please
[20:33:24] Solution??
[20:32:21] Problem in infinix hot 12i
[20:31:47] Hello
[20:29:50] The one cm2 extract can\'t be patched
[20:10:40] Or extract from phone firmware
[20:10:30] Use test points
[20:08:26] I need help
[20:08:20] Pls anyone with camon 19 boot ing?
[20:08:06] Hi
[19:55:40] Infinix X6511B fdl file please the one in boot pack not working
[19:29:10] I want download KA7 flash file
[19:28:21] X657 firmware
[19:04:18] Thanks
[19:04:10] Any video link to show how it done please help
[19:03:32] Please help
[19:02:08] Tool says unlock done but still locked
[19:01:22] Please team help how to unlock this phone Nokia rm-437
[18:22:06] Model number not name ?
[18:21:34] Type: Infinity-Box/Dongle [CM2]
S/N: 1749CE23
Username: 001749CE23
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0155; Expired: 06-Apr-2024

[18:21:03] Infinix Rapheal V2 or sec base, local sla, then retry
[18:12:20] I want download smart 5 firmware
[18:11:04] Smart 5 firmware
[17:50:58] help me admin. my Ticket-ID:1680786438.503 fault.bin 003E2D0345 [5a]
[17:30:43] ??
[17:22:59] Nvram file not found while to rewrite on device
[16:53:58] I\'ve paid for license and it has not reflected pls admin check. SN=>1749CE23
[16:28:07] \"
[16:06:30] X688B da file is needed
[16:01:39] X688B da file
[16:01:19] Please given me procedure
[15:47:29] The is reading the phone perfectly buy not able to remove the frp
[15:46:25] I\'m done
[15:22:17] Need urgent help
[15:17:38] Much appreciated 👍
[14:46:18] Sure
[14:45:59] https://t.me/InfinityBoxTalks/148165
[14:45:23] Will it work?
[14:44:53] Bit version?
[14:44:52] Bf6 easy buy
[14:20:39] Help with uk Edition off.. please Asap
[14:12:11] hello group help me itel A58 frp
[13:42:08] Is v2.37 mtm2 exe work, fine on,os 11/12,
Because I was disappointed with the latest exe v2.42, just factory reset/frp Tecno Be7, and It corrupt the phone.
[13:35:14] Infinix HOT 12i X665B Jumping To Brom With Test Point FRP Or Flash Fix || infinix x665b test point / GSM EXPERTS
https://www.youtube.com/watch?v=Sf7lx8F6IHs
[13:33:39] Help me
[13:33:34] Pls anyone have infinix x665c test point
[13:23:00] hello need flash samsung a32f mkopa phone has password anyhelp
[13:14:32] Make this https://infinity-box.com/?r=100155
[13:12:47] S/N?
[13:12:28] And what is with the phone after reset?
[13:06:48] Download manager log please
[13:05:08] Not work
[13:01:09] Make this https://infinity-box.com/?r=100155
[13:01:09] Cm2 misconfiguration admin help
[12:49:47] Privacy lock
[12:28:09] Sure
[12:27:45] The higher version cm2 can\'t flash
[12:18:04] Which device do you want to fix
[12:16:52] Guys my cm2sp2 not working how can i fix it
[12:16:38] https://t.me/InfinityBoxTalks/166862
[12:04:23] https://infinity-box.com/service/
[12:03:44] it works
try again well
[12:03:28] select loader for another model, similar to yours

install https://infinity-box.com/news/?r=4294
try loaders for different models
[12:02:47] try it and send report here
[12:02:15] Can cm2 handle x688 ?
[12:01:48] Ok
[11:46:18] Sp2 memory tool please, can u make an update for it, still grayed out and we really need it, lots of phones giving us headaches are SPD phones, rpmb memory operations really needed. I hope something is cooking
[11:33:40] Please house I need test point X665C
[11:28:19] Can cm2 handle x688 ?
[11:26:02] Can cm2 handle x688 ?
[11:23:31] Pls the test point for tecno BDAh
[11:20:47] Dongle manager
[11:16:38] Please solution for smart 6(x6511b) stoping at kick fdl
[11:14:25] Any got for sale
[11:14:20] Test point
[11:14:16] Tecno ki7
[11:03:36] Tecno KG5J TESTPOINT NOT WORKING SOLUTION PLEASE
[10:53:55] Thanks 👍
[10:52:16] Chat me sir
[10:40:52] Done
[10:36:40] How do I have it pls
[10:36:12] I have
[10:35:19] Tecno bf7 test point needed
[10:18:24] Plz
[09:49:49] How to get Username and
password
[09:49:12] Infinity cm2sp2-helper tool
[09:48:44] No one has solution please?
[09:37:46] It\'s still Locked after frp reset
[09:31:41] Reset Mode: Reset FRP only

Operation: Reset Settings/Format FS [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FRP [ RESET PROTECTION ]
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM7)
MODE: PRELOADER PORT; PORT: 7
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init...
Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x00
[09:29:03] Only pin and frp
[09:28:30] I\'m willing to pay for online flash please
[09:28:10] Is there anyone here with hmd tool login??
[09:26:59] Nokia 1270 after flash rollback error, any help please???
[09:26:00] Not yet
[08:57:37] Not working
[08:50:46] Thanks
[08:44:50] Wait for update
[08:44:24] But the build number on the phone is v100
[08:43:54] Yes
[08:43:38] Hope correct loader is selected ?
[08:43:12] REGISTRATION CODE: A97GRP
[08:43:03] No
[08:42:40] Iwant to share my infinity cm2 dongle. Is it possible? Any how??
[08:41:23] Wich write of registration
[08:39:38] Hello
[08:39:10] Sure available but 💯 if hardware experience is required
[08:38:56] Hi
[08:38:29] Logs ?
[08:38:15] Can you then try copy and paste
[08:36:13] Details is wrong bro
[08:35:29] Kf6h test point needed please
[08:34:39] Found 1 file razor
1. Vertex_Vertex_RAZOR_HW1.R1M.V15_inst

[08:34:17] Why can’t you just do as I said for goodness sake
[08:33:40] Not sure it can
[08:32:29] Ready to release funds 💲💰?
[08:31:39] Found 5 files kf6h
1. tecno_KF6h_H6219EF_RGo_GL_210719V464
2. tecno_KF6h_H6219EF_RGo_GL_210311V308
3. tecno_KF6h_H6219EF_RGo_GL_MP_210528V456
4. tecno_mobile_limited_tecno_kf6h_kf6h_gl_MT6765_E684FDFCEB11D8BF1AE4BDA84DD2C370

[08:27:38] 👌 kindly flash with same or an upgraded build version fw on the device initially
[08:25:21] Meaning that you haven’t done what is required
[08:23:00] You have the tp
[08:22:01] Kindly place order for dongle card reader
[08:20:52] Logs ?
[08:20:21] Fixed ?
[08:19:10] I think I responded, what’s the issue afterwards
[08:17:55] Are you good in hardware?
[08:17:18] Gotten ?
[08:16:42] Your issue solved?
[08:14:32] X6511b doesn\'t identify v100
[08:12:00] Can I see I clear motherboard pics if you haven’t got it
[08:11:54] 👆
[08:11:03] I already checked it is ok
[08:10:42] Check your username and password
[08:09:46] Gotten ?
[08:09:32] A clear motherboard pics?
[08:08:43] Please someone should help me
[08:06:36] Your issue fixed ?
[08:06:26] Those fdl error stuff is getting worse, especially infinix x6511b
[08:05:47] Don’t be scam bro, can I see motherboard pics ?
[08:04:50] What task do you want to perform
[08:01:54] Tp required
[07:52:51] Please solutions 👆
[07:49:16] Yea but I also picked the phone model as boot
[07:20:42] 🙏 Need This Firmware 🙏

Model Name : RAVOZ Z7
Product Name : RAVOZ_Z7
Manufacturer : RAVOZ
Platform : k63v2_64_bsp
Android Version : 9
Security Patch : 2020-11-05
Build ID : K6305Q2AS.RAVOZ.Z7.HDJ.P0.TA.1121_1443.V3.10
Build Date : Sat Nov 21 14:39:15 CST 2020
[07:18:27] I select another boot but samthing
[06:53:54] Has anyone successfuly unlocked Techno Go23 model with Cm2

MediaTek Helio A22 Processor
[06:43:56] See me bro
[06:38:08] Tecno BE6j failed to enter meta mode
[06:20:09] .
[06:11:40] CM 2 activation 2 year price
[06:03:48] Bro no be the normal procedure be this?
[04:58:55] Just the normal procedure bro, also pick file as fdl
[04:55:55] Anyone with solution x6511b v100 2023 215 it cnt brom
[04:42:50] Frp remove
[04:42:24] Nothing found for nokia TA-1305

If you will get the file upload it to support with iosFileUploader

[04:41:38] Found 7 files nokia 8000
1. nokia_pm_collection_RM_217_Nokia_6300_359811012380009_0_400
2. nokia_pm_collection_RM_618_Nokia_X2_00_351933058000669_0_400
3. nokia_8000_4g_8000_4G_TA_1311_6.0.1_MSM8909_MMB29M_2020_11_24
4. nokia_800

InfinityBoxTalks 2023-04-05

[23:57:16] Come and explain how you take flash it with v22
[23:04:11] use support forum for long text
[22:59:52] next try gives you ban
[22:58:44] select loader for another model, similar to yours

install https://infinity-box.com/news/?r=4294
try loaders for different models
[22:58:19] next stupidity gives you permanent ban
[22:56:48] https://infinity-box.com/news/?r=4294
[22:56:02] select another loader
[22:55:13] https://infinity-box.com/news/?r=4294
[22:53:05] select loader for another model, similar to yours

install https://infinity-box.com/news/?r=4294
try loaders for different models
[22:52:17] disconnect other dongles, connect only cm2
[22:50:50] model?
[22:50:28] https://infinity-box.com/news/?r=4294
[22:49:43] install libusb https://infinity-box.com/?r=100222

also it may be something with your PC after windows update
check https://www.google.com/search?q=0x0c000007b
[22:49:15] read makes no changes to phone
remove battery
[22:47:56] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
[22:47:29] write here otherwise you may get ban
[22:45:43] write here otherwise you may get ban
[22:45:29] write here otherwise you may get ban
[21:42:21] try to flash one by one partition. then flash all.
[21:35:01] DM
[21:34:47] Meaning
[21:32:38] Itel S18 stop on prepared target. Any solution pls
[21:18:52] Tecno KG5P test point please
[21:05:22] You\'re deff right bro, I used v.78, which is an upgrade to the current firmware on the phone, it failed on sp2 on the infinix X6511b, but went through n fine when I downgrade to v.022 firmware
[21:02:30] dm
[20:45:52] I\'ve one with me now if you can flash it come let\'s see
[20:44:44] Settings on platform for infinix x6511B
[20:44:43] The version 78 that\'s not flashing with cm2sp2 even with MDM file
[20:36:18] friend, what is not working?
[20:27:04] Anyone with infinix x6511B, the ones on cm2sp2 not working
[19:55:32] you can insert smart-card to another card-reader
[19:54:42] card readers are the same.
you can insert card into any other reader
[19:53:51] check test point again, it works
[19:51:44] TECNO KG5J testpoint not working solution
[19:42:23] Can we partner and buy the TestPoint
[19:32:01] Not yet
[19:20:34] Please can I get the frame the simcard is okay..some one was telling that there are selling it but I want to be sure ...can I order for only frame
[19:18:24] I have service it
[19:17:46] No
[19:08:03] I fixed another spark 8c with the same problem using preloder, but this infinix is killing my head if you have fdl please help
[19:06:06] It doesn\'t bro, but it picks but not booting fdl
[19:04:51] Brother I think 🤔 you have ready killed the phone? Does it still power on?
[19:03:30] Have u gotten the TestPoint
[19:02:00] Kindly help
[19:01:53] Anyone with infinix x6511B, the ones on cm2sp2 not working
[19:01:43] 9ja ignorance on top
[19:01:01] Bro have you gotten this tp
[18:58:10] Thanks
[18:57:53] Tecno BF7 TestPoint who have it?
[18:53:08] Hello dear. May use lockerdongle as Smart card reader when I have Cm2 Simcard or other
[18:14:24] Thank
[18:13:30] There\'s no payjoy app or kiosk mode on the settings, all apps bro.
[18:10:23] Check here cerfull
[18:08:48] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
[18:08:30] Do you have any other box or dongle?
[18:08:01] Do you know exact app name?

Latst AST tool is here https://infinity-box.com/?r=100202
ADB Identify with checked \"apps\" box gives list of all apps
[18:06:37] Thanks!
[17:51:04] Vivo y17 latest security preloader file need
[17:48:01] I have dey and heat it.i even service it.just showing USB not recognize....u help will be appreciated
[17:46:53] Please my cm2 stop working how do fix this .......it feel into water can I get the panel or is there any solution
[17:42:10] Mining? Brother..
[17:40:24] You never jam those one\'s
[17:27:14] Look for payjoy go to settings and all app I think 🤔 you get me?
[17:25:31] I searched the app is no more.
[17:24:41] I flashed it eventually with a downgrade firmware
[17:24:08] Ok, thanks
[17:20:58] Brother if normal support 100000% but with MDM you need to get correct file then you are good to go 👍
[17:14:13] X6511b format flash error, Infinity Team Is there no solution yet for these spreadtrum phones
[17:13:15] Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : X6511B-F6318-11.0-OP-V78-20221102.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.
[17:12:59] Can you send full video?
[17:09:52] Spd
[17:09:47] What do you mean?
[17:09:40] Tecno spark 8c connecting via test point keeps saying it failed how do ideal with it
[17:09:38] Spd or mtk
[17:09:13] Tecno Spark 7
[17:08:44] Send sw log text
[17:08:11] phone modal
[17:07:41] Pls how will I do it
[17:06:49] I have the firmware, but it\'s not flashing with sp2
[17:06:36] yes
[17:05:54] Look for file fast and do
[17:05:02] Can I remove easy buy with my cm2?
[17:03:51] Yea bro
[17:02:51] Mdm phone?
[17:00:53] X6511b format flash error, Infinity Team Is there no solution yet for these spreadtrum phones
[16:42:32] See me
[16:40:52] contact @libimobile
trusted
[16:39:35] Reset password or e-mail here https://infinity-box.com/service/\r
\r
Click here https://www.youtube.com/watch?v=KogYDEkg-O8
[16:39:35] Card found : E76928FE , v0155
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Open : X6511B-F6318-11.0-OP-V038-20220520.pac
VER : BP_R2.0.1
LEN : 4.18 GiB
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V038-20220520_1719

Reading package ...
Read package finished!

Product Brand : Infinix
Product Device : Infinix-X6511B
Product Model : Infinix X6511B
Product Name : X6511B
Patch Level : RP1A.201005.001
Display ID : X6511B-F6318-11.0-OP-V038-20220520
Ver. Inc
[16:37:45] you guys should stick with v2. 37
little regrets
[16:18:39] It Tecno pop 5 select correct model and loader .
[16:17:42] Found 20 files note 11 pro, search limit is 20 files per server
1. xiaomi_eng_rom_Redmi_Note_11_Pro_5G_Veux_K6S_SW_S88006AA1_V045_M10_EF_AR1_XM_USRD_ATO_images_KeepNV_eng_rom
2. recent_MT6582_alps_Note11_PRO_Plus_5G_5.0_LRX21M_Note11_PRO_Plus_5G
3. Cubot_MT6771_CUBOT_OTE_20_PRO_T_NOTE_20_PRO_A013C
[16:17:04] Found 2 files note 11 4g
1. xiaomi_poco_m4_pro_4g_redmi_note_11s_4g_fleur_MT6781_AFAE97CD11F93FFC4EE119A7FCD8026A
2. xiaomi_poco_m4_pro_4g_redmi_note_11s_4g_fleur_MT6781_C1108022D09774DBFC3A39202E405515

[16:10:21] select loader for another model, similar to yours

install https://infinity-box.com/news/?r=4294
try loaders for different models
send result here
[16:08:03] What do you mean brother
[16:07:39] What do you mean?
[16:06:48] Wich loader i select
[16:04:14] ok,thanks
[16:04:08] no
[16:04:02] use default built-in loaders
[16:03:40] i thought this qunlocktool its also infinity
[16:03:18] that\'s why I tell you to check that tool info
I have no info about frp
[16:02:49] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[16:02:41] i only see unlock , but no price for frp
[16:02:16] select loader
[16:02:04] no idea about frp
check that tool info
price see line 45. here https://infinity-box.com/price/#711
[16:01:31] hi team，how much take for frp sony on qunlocktool
[16:01:08] Friend.
Don\'t push me to ban you.
If you know how to fix a problem you should write here otherwise get out.
Thank you for your kind understanding!
[16:01:03] How to solve
[16:00:57] hi team，how much take for frp sony on qunlocktool
[16:00:06] Thanks!
[15:59:45] what is the exact name of that payjoy app?
[15:59:31] Yes work on frp
[15:59:06] you need 5 credits at your account
contsct to any seller https://infinity-box.com/buy/
and buy credits
[15:58:19] It will work pafec make sure you uninstall pay joy app no relocked brother
[15:58:08] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[15:57:46] Good!
Have you tested it?
[15:54:51] ok, good!
[15:50:12] Friend.
Don\'t push me to ban you.
If you know how to fix a problem you should write here otherwise get out.
Thank you for your kind understanding!
[15:40:29] Dm me
[15:35:21] Hello everyone please help me
SOS this flash file ☝️
[15:27:50] Bf77 test point pls
[15:25:12] itel+A507LS+FRP+Reset+File.zip
[15:17:54] I\'ll report back if the customer comes back but whatsapp and facebook working nice
[15:16:36] Yes still working... now
[15:07:26] X665c preloader file emi Need anybody
[15:05:43] Please help
[15:04:38] Found 1 file Itel A507LS
1. itel_A507LS_SU335_11_KE_SF_LC_V007_20210907

[15:04:10] Found 1 file itel A24
1. itel_it5233_A245_EnHiTeGuTa_IN_20170511

[15:03:36] Itel A507LS fdl file please
Itel A24
[15:03:06] Tried to unlock Nokia C20 bt it ends there. Shows balance 0
[15:02:59] Please help with fdl file for rhis phone
[14:58:35] X657 mdm file
[14:52:43] Dm
[14:51:57] I factory reset+frp Tecno be7, the operation successful, but the phone didn\'t boot,it writing tiny word left middle.
[14:49:54] Type: Infinity-Box/Dongle [CM2]
S/N: 5D250BA5
Username: 005D250BA5
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0155; Expired: 12-Apr-2023

[14:46:52] No
[14:46:40] New security update you know
[14:46:30] Yes
[14:46:24] And you grant root access
[14:45:49] I did
[14:45:02] Did you root properly
[14:43:45] Pls help me anyone 🙏🙏🙏
[14:40:01] Emi
[14:39:47] X665c preloader bin needed
[14:30:49] Infinix x665c pls help security plugin failed to uninstall
[14:27:16] Send your Infinity username to seller https://infinity-box.com/buy/\r
How to know username https://infinity-box.com/service/
[14:27:16] Somebody help me with how to buy server credits.
[14:26:24] Any body got
[14:25:28] 4 mdm by pass
[14:24:15] download from infinity server
[14:24:02] Tecno KI7 TESTPOINT ... any got
[14:21:44] https://duckduckgo.com/?q=Mini+Dremel+Electric+Drill+Tools+With+Flexible+Shaft&t=ffab&iar=images&iax=images&ia=images
[14:19:37] what file?
[14:19:23] cpu type?
[14:19:04] Run bat file available just dm
[14:18:54] What is your problem?
[14:18:31] Tecno kI7 test point
[14:18:04] What is your problem friend?
[14:17:32] select loader
[14:17:12] https://infinity-box.com/news/?r=4294
[14:16:41] check now
you will see two images. Follow this manual and you will be able to repair many phones by safe way.
[14:13:25] ok, let me remove last image
peopl don\'t want to read text, only like to see pictures
[14:10:40] Ok, i have been wondered when i saw a real meta big grinding machine. Ok thanks admin
[14:10:14] https://infinity-box.com/news/?r=4299
[14:09:42] Is it Ok after connect to network?
[14:08:28] Have you go it?
[14:08:06] use default built-in loaders, it\'s Ok
[13:57:53] Ok😂
[13:57:49] it\'s not a joke.
You must read it carefully, it helps you to keep many phones working
[13:57:11] Send sw log text
[13:56:55] What is the problem?
[13:56:29] Kg5j testpoint not working pls cm2
[13:55:47] Found 4 files Foxtrot
1. Bravis_MT6582_BRAVIS_Alpha_bird82_wet_c_jb5_4.2.2_MX1059_JHGG_FOXTROT.MP.V1.0
2. Foxtrot_MT6580_Foxtrot_NEXT_Android_5.1_ALPS.L1.MP6.V2_BIRD6580.WEG.A.L
3. Telefunken_Telefunken_Foxtrot_J50G_JOUZHOU_J50G_5.1_LMY47D_release_keys_Foxtrot
4. [13:55:28] send image here after you will get it
[13:54:58] what do you want to do with the phone?
[13:54:16] What is the problem?
[13:40:32] tecno pop5 pro frp help
[13:39:11] You don’t identify first, then factory reset/ smart reset. It’ll boot normal if it’s latest phones e.g Android 11/10. But you’ll need full flashing if it’s old model.
[13:22:47] You can hide it
[13:06:41] Ok
[13:06:11] look to your dm
[13:05:58] sometimes just factory rest then frp
[13:05:15] Infinity please find solution to these, last exe 2.42.
These is critical damage.
[13:02:35] nop system damaged
[13:01:58] No other alternative, the phone is good before, my operation,I do just to remove, pattern n frp.
[12:58:12] full flash,
[12:57:43] It\'s now rebooting
[12:56:31] Pls factory reset+wipe on Tecno be7, the didn\'t boot again
[12:52:09] For this error shown here Tp required
[12:51:39] Kindly use a fw that has same or higher build version
[12:48:32] Can you please provide clear pcb pics
[12:46:35] Nokia 1400 pin reset possible on cm2? Don’t have infinity best.
[12:05:25] Check
[12:03:34] Reply your dm
[11:59:42] Please am begging help me with this file
[11:59:00] Come
[11:58:19] Camon 19pro Ci8 testpoint please
[11:51:42] Nokia c30 fdl pls
[11:51:23] Download the file of that phone and upload it to custom FDL it will work
[11:50:05] Please help
[11:47:15] Nokia c20 fdl file please
[11:46:56] Model Name : J50G
Model Brand : Foxtrot
Model Device: J50G
AndrVersion : 5.1
BaseBand CPU: JOUZHOU
CompileDate : 25.01.2016 2:58:09
Project Ver : LMY47D release-keys
Model Ext : Foxtrot
[11:46:29] firmware foxtrot
[11:45:55] Nazwa modelu: J50G
Marka modelu: Foxtrot
Model urządzenia: J50G
AndrVersion: 5.1
BaseBand CPU: JOUZHOU
Data kompilacji: 25.01.2016 2:58:09
Wersja projektu: LMY47D klucze zwalniające
Model Ext: Foxtrot
[11:45:10] infinity spd2 pliss
[11:39:53] Is not connecting, I need help on tutorial
[11:39:00] Admin can you remove this pinned message on the top? It\'s real joke but confusing 😂 me.
[11:36:34] Operation : SP Unlock [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : GEN_EU_P963F60V1.0.0B10_DL.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : F
[11:35:49] 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read NVM [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

[11:35:49] Card found : A24FC5E7 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Open : GEN_EU_P963F60V1.0.0B10_DL.pac
VER : BP_R1.0.0
LEN : 3,72 GiB
CPU : s9863a1h10
VER : MocorDroidR

Reading package ...
Read package finished!

Product Brand : ZTE
Product Device : P963F60
Product Model : ZTE Blade A51
Product Name : EEA_P963F60
Patch Level : RP1A.201005.001
Display ID : RP1A.201005.001 release-keys
Ver. Incmt : 20210319.102442
Ver. CodeName : REL
Ver
[11:33:43] Spredtrum CPU
[11:32:50] Hello, zte blade a51 after replace mmc, not work gsm network, \"network locked\" print on status. SP Unlock operation print no lock
[11:32:44] Gionee s10l da file please
[10:55:23] Nothing found for ta1061

If you will get the file upload it to support with iosFileUploader

[10:54:58] 🙏
[10:54:33] Found 60 files nokia 5.1, search limit is 20 files per server
1. nokia_RM_1019_01068.00023.14295.43001_059W559_D2746F0B_CustomerNvi_01068.00023.14295.43001_1024_7b0496a925c1d8a35f9554763f6eaa4c.nvi
2. nokia_RM_1019_01068.00023.14295.43001_059W518_B7A92434_RetailModeNvi_01068.00023.14295.43001_1015_10b151222cbcc1dcefc95c481b4e6244.nvi
3. [09:26:39] Please help pop 7pro test point
[09:16:04] Bf6 testpoints
[09:14:50] BLACKVIEW A55 Payjoy Remove
[09:14:49] Blackview
[09:14:49] Blackview A55 Kiosk mode/Payjoy Removed.
[08:58:50] SPD?
[08:51:56] Any help
[08:51:48] Nokia c30 factory reset
[08:51:18] Who have
[08:51:03] X669 fdl file
[08:27:16] Please how to fix
[08:12:51] If you couldn’t fix it using the appropriate button (repair baseband in security tab) First you need to wipe nvram and nvdata & then you fix baseband using the CM2MT2 button.
[08:07:52] Ok
[08:07:12] Come i have it
[08:05:56] Someone please respond
[08:03:49] How can you help
[08:03:42] Please I also need d test point
[08:03:30] Hello
[07:58:57] Come for Permanent solution
[07:55:20] Blackview
[07:55:20] Blackview
[07:32:20] I have i
[07:28:00] Infinity why una dey wicked, Abeg release new update for spd2 nah
[07:24:33] best doesn\'t update anymore, what device do the nokia models run on admin
for example :ta-1375
[07:19:12] U mean
[07:12:04] Come
[07:06:32] Joseph Sunday:
Infinix hot 20i test point

Infinix x665E hot 20i
[05:19:35] What is the name
[04:49:28] Come
[04:47:02] Please who have solution to a10s unknown baseband
[03:56:41] Try here @FlashFileSearchBot
[03:56:41] Come i have file
[00:02:15] Big big congratulations to me

I was able to earn massively by joining this beautiful platform

I started with $250 and i was able to earn $3,500 under 8 hours trade just by following my manager tips on signals buying

Am grateful sir for your transaprency,honesty and truthfulness ..God bless you sir ,that is why am sharing the goodnews

Kindly click the link below to earn too
t.me/joinchat/dSQClLJND4MzMGFk
t.me/joinchat/dSQClLJND4MzMGFk
t.me/joinchat/dSQClLJND4MzMGFk

InfinityBoxTalks 2023-04-04

[22:47:27] Thank you
[22:47:09] Try here @FlashFileSearchBot
[22:47:09] Need File
[22:46:53] Hang logo and auto restart. Thank you
[22:43:13] Problem?
[22:42:31] vivo y21
Tested test point need picture
[22:38:51] Select pac file and leave the boot at it is.
[22:36:51] Samsung A10S
[22:19:31] I need da file whith certificat for tecno kg7h
[21:54:58] Try to disconnect battery and reconnect it.
[21:53:39] After read firmware?🤔
[21:39:27] Please help me PR652b nvm file
[20:53:02] Found 1 file ta-1346
1. nokia_g10_ta_1334_ta_1346_test_point.jpg

[20:52:12] Ok thanks
[20:48:30] Yes
[20:41:20] Ok do you mean with cm2?
[20:40:22] I don know how to do that
And I told you that the phone is dead
[20:38:49] Do smart reset
[20:38:34] Yes sir
[20:38:11] Mtk
[20:36:29] The phone is dead after reading the file with CM2 mt2
Is there any solution?
[20:34:15] The phone is dead after reading FW
[20:33:08] Tecno KG7H
[20:29:50] Hi i need yours help whit Tecno KG7H
[20:07:56] Found 20 files mobiwire, search limit is 20 files per server
1. aquaris_BQru_4028_MT6570_MOBIWIRE_6.0_MRA58K_sr6570_cweg_m_LP402_H4009L_BQru_40285_DS_V04_20170628_MP_snMBs085LVawXXXXX
2. aquaris_BQ_4028_MT6570_MOBIWIRE_6.0_MRA58K_sr6570_cweg_m_LP402_H4009L_BQru_40285_DS_V04_20170628_MP_snMBs085LVawXXXXX
3. [20:03:47] Found 20 files x657b, search limit is 20 files per server
1. recent_X657B_H6117EIKL_RGo_OP_S2_221121V777
2. recent_X657B_H6117EIKL_RGo_OP_S2_221121V777
3. recent_20_X657B_H6117DFJ_QGo_OP_220822V438
4. infinix_MT6761_INFINIX_MOBIL
[20:01:20] How I fix this error
[19:57:27] Please help me nokia ta 1264 network unlock
[19:35:31] Do you have a solution
[19:19:47] no information
[19:17:09] Update your card whit dongle manager
[19:16:21] same problem on information
[18:54:33] Same problem here
[18:53:23] Cm2 spd2 has problem many phones need FDL .while was working before
[18:39:37] no information
[18:25:49] Come
[18:23:55] Please i need the flash file
[17:47:45] What do you mean by lo
[17:46:46] Lol yes bro it\'s connected
[17:24:42] Do you have dangle connect to your PC?
[17:22:40] Okay
[17:22:34] Can you please assist with this error. .my support is active
[15:21:56] is frp
[15:21:23] ok
[15:21:15] No frp
[15:21:07] no
[15:20:32] Diag mode try
[15:20:19] Are you trying to flash not frp ??
[15:20:06] Test point
[15:19:32] Itel A662L and S662L Fdl file please
[15:16:26] Password 🔑 GIFTY
[15:16:02] Used this pac file make sure no company phone


https://mega.nz/file/7pNwFaLa#FsfOcdlKEdUnjSPd7d8YJSwtZbZuvL-puBnncNIj5dQ
[15:13:46] Anything i didnt wrong?
[15:06:26] Try this pac file
[15:05:05] same error
[15:02:36] Try this one and report back
[14:53:55] Used this if not working for you let\'s me know

https://mega.nz/file/K9sUXTQa#vBVQ3Zk2VJYRRJ7m-2iH0TB3yEyUr1UzlfPQhb6mKOQ

https://mega.nz/file/Ho0HhbDQ#oKOr5Q_ruS5j9SkEIVZ_P9_gquwzkE8T1S1XxnYEi2U
[14:52:45] I tried many times not working
[14:52:22] Okay 👍
[14:52:08] Frp
[14:50:26] What do you want to do with the phone?
[14:47:14] Internet is connected
[14:40:27] https://support.hiunlock.com/index.php?a=downloads&b=file&id=12473

Someone help me with this file please
[14:39:37] nokia c30 ta-1359 loader needed
[14:36:21] Inbox me
[14:35:34] At where
[14:35:12] Come
[14:34:30] How do I do that
[14:34:21] Okay
[14:32:26] Itel A661W fdl file
[14:17:25] you know the test point please help me
[14:16:00] Show
[14:14:36] I tried my inbuilt boot still error
[14:00:11] Panel bd4h needed
You have?
[13:51:18] Hi
[13:51:16] Pop 7 pro
[13:47:13] TESPOINT
[13:46:09] You the one not getting it not CM2 team
[13:45:45] Don\'t use FDL, use pack file as DA and connect your internet with A661W it will work

I did one now and it Flashed successfully
[13:42:43] TP
[13:42:03] Check your DM
[13:40:11] You guys aren\'t getting it right

It works perfectly
[13:39:01] Hey bro, infinity support it.. don\'t criticize early

Use pack file, I just finished doing one A58 itel right now and it works perfectly.
[13:36:53] Come
[13:35:22] Someone should help me with Tecno BF6 fdl file
[13:29:20] Anyone please
[13:19:36] How to bypass this error.. Please help.
[13:16:55] Please help me
Tecno BD4H
Frp lock
[12:37:48] Repair imei issues please
[12:36:29] No baseband
[12:36:18] Oppo R9S PlUS QCN FILE help if any one has it ...
[12:35:32] Nothing found for oppo r9s plus

If you will get the file upload it to support with iosFileUploader

[12:34:01] Tecno spark 8c kg5j DA
PLEASE
[12:32:50] Found 9 files ci6
1. tecno_ci6_camon_19_test_point_2.jpg
2. tecno_ci6_camon_19_test_point_1.jpg
3. recent_MT6768_TECNO_TECNO_CI6_12_CI6_H6917ABC_S_GL_220728V592_SP1A.210812.016_ci6n_h6917
4. Acer_MT6735_acer_T02_acer_T02_5.1_ALPS
[12:30:27] Operation: Repair Security [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM3)
MODE: BOOTROM; PORT: 3
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
MEID: 4B
[12:10:44] All at your own risk my br
[12:10:27] If not imei repair cannot work
Try reload with full firmware
The process is 50/50
[12:10:03] Check if it has baseband
[12:09:51] You can use maui meta or modem meta
[12:09:17] If it’s mtk
[12:08:53] Please oppo a5s imei repair is it possible with CM2?
[12:06:44] The firmware itself my brr
[12:06:32] Boot it through the fdl space
Insert the firmware there you are good to go my brrr
[12:05:40] I\'ve tried the firmware method with a662l but no success
[12:04:21] Fdl is the firmware itself
You need to download the firmware
[12:03:24] X6819 custom preloaded/Emi file?
[12:02:51] Cm2 team itel a662l and s662l Fdl file problem, any solution?
[11:59:20] Found 6 files tecno Ci8
1. tecno_MT6781_TECNO_TECNO_CI8_12_CI8_H816A_S_OP_220713V998_SP1A.210812.016_ci8_h816
2. tecno_ci8n_twrp_ci8n_cy_ci8n_h816_MT6781_99B7AC43AE4850A11F95E9CF45E24D7C
3. tecno_ci8n_MT6781_904D27C958365BA5B7B048A083E957E1
4. [11:53:31] Nothing found for x6515

If you will get the file upload it to support with iosFileUploader

[11:50:42] infinix x6515 imei repair
I need help
[11:40:32] BD2 full is struck here
[11:38:58] Hello team
[11:36:18] I can\'t still flash itel a662L with cm2
[11:20:08] https://t.me/+yU2N4QNCvpg2ZGQ0
[11:15:59] Found 1 file honor x6
1. isp_huawei_vne_lx3_honor_x6s.jpg

[11:15:41] Nothing found for vne-lx2

If you will get the file upload it to support with iosFileUploader

[11:06:38] Cm2 itel a661w now given fake update these days
[10:57:58] Help itel s18 stock at preparing target
[10:50:56] Itel a58 failed any help?
[10:20:09] Please anyone👏
[10:09:30] I need tecno ci8 test point please
[10:08:45] I need help X665 testpoint
[10:05:04] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[10:05:04] Inbox
[09:50:56] Have any other suggestions
[09:39:43] Tecno ci8 test point please
[09:25:42] Check carefully it\'s shiwing meta on mode
[09:24:47] This is preloader mode
[09:18:30] Pleaee help,i get stuck here when booting via meta mode
[09:15:26] What\'s wrong with this device, stuvked here
[08:20:59] Please I don\'t understand
[08:07:20] easy 2.43.8
[08:03:53] Please oppo a5s imei repair is it possible with CM2?
[07:58:47] Hi how to repair imei redmi note5a by cm2?
[07:42:09] tv
[07:42:02] help bro
[07:41:24] vivo 2023 patch cm2 working 😑😑
[07:40:59] easy to work
[07:40:41] 2.42 cm2
[07:40:24] easy
[07:31:46] vivo y91c flash fail
[07:31:16] Help ..sm galaxy A70
[07:29:06] vivo y91c help
[07:01:45] https://forum.gsmhosting.com/vbb/f296/itel-a631w-repair-imei-done-3147146/#post14771134
[06:57:23] That is boot v1.17 or is there any other one?
[06:55:29] No Bro
[06:27:12] Use base 1704 and vol+/vol-
[06:11:42] Solution please although the customer already gone but still need this for future days.
[05:50:52] What do you mean sir?
[04:22:46] Yes, but v431 no
[04:22:14] No. Pinouts to service emmc
[00:29:14] Guys is kg5j test point still working

InfinityBoxTalks 2023-04-03

[22:17:43] Send sw log text
[22:17:39] Its like testpoint
[22:16:57] Send sw log text
[21:42:54] Cm2mt2 while flashing firmware be6 says out of memory \"cm2 memory tool\"
[21:17:20] Logs ?
[21:17:03] https://t.me/InfinityBoxTalks/164350
[19:46:41] I\'ve heard some ppl having full removal on SPD devices, buh it\'s paid.
[19:46:12] Same solution, if Mtk, root and remove security plugin, if SPD, full formal and run package disabler.
[18:02:14] Help lg su760 3d hard reset
[17:52:24] Bypass
[17:51:59] Samsung A04e MDM remove any solution
[17:50:08] Sir
[17:44:39] vivo Y21 pattern lock or frp lock...
Update version
any box or device support this model
Da or Emi Priloder file need
[17:42:49] Cpu mtk? Or?
[17:40:12] Yes
[17:39:59] A662l?
[17:31:32] Not detected by pc with test point but it is dictated without test point
[17:30:13] I have even had to consult another person and it\'s same result
[17:27:35] Must have isp
[17:12:25] How much
[16:45:47] help i need to factory infinix x665 i try by test point and failed
[16:45:09] hellow
[16:28:41] cm2spd imei repair is Hidden
what should I do ?
[15:56:16] None found
[15:55:41] Search on YouTube for quickly solution
[15:54:49] Anyone with ideas should shared
[15:54:16] How to bypass itel A60 fro with cm2
[15:46:01] Yes this support long time with completely install bootpack
[15:42:48] I already removed it by cm2
I selected itel p661w sp2
[15:40:25] It work ???
[15:35:01] Some has but is paid at a little rate
[15:34:21] 🧑‍💻
[15:32:34] 💯👆
[15:27:34] Thank
[15:12:01] P661w boot file needed please
[15:11:42] ID7: Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000
SPLock: Not locked
IMEI[2]: 3551601146xxxxx
ID1: Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 12345678
ID2: Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID3: Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID4: Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID5: Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID6: Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID7: Lock : Not Locked | M
[15:11:41] 3. Restart software
Reconnect Power/Cable now


Operation: SP Unlock [ v2.43a7 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
[remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM17)
MODE[0]: BOOTROM; PORT: 17
Waiting BOOT ACK...
BROM: Skip ACK verify
BROM: Init...
Init passed
MODE[0]
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL:
[15:11:41] SLA: Local Auth
SLA: Starting Auth
SLA: Continue Auth
Protocol Error: Fail to init Control
1. Check USB drivers
2. Reinstall libusb
3. Restart software
Reconnect Power/Cable now


Operation: SP Unlock [ v2.43a7 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
[remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM17)
MODE[0]: BOOTROM; PORT: 17
[15:11:41] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[15:11:41] Reconnect Power/Cable now


Operation: SP Unlock [ v2.43a7 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
[remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM12)
MODE[0]: PRELOADER PORT; PORT: 12
Waiting BOOT ACK...
PRELOADER: ACK Ok
BROM: Init...
Init passed
BROM: Enforcing BootROM
Enforcing Fail. Skip
MODE[0]
CHIP:
[15:11:40] Tecno R7+ SP Unlock problem.

=== [03-04-2023 06:02:48 C:\\InfinityBox\\CM2MT2 v2.43a7\\CM2MT2.exe] ===
Wait...
S/N: 316E3B2C v0154
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.43a7

Backup files: C:\\InfinityBox\\CM2MT2 v2.43a7\\backup\\
Compact backup files...
Backup files: 2 dirs: 1
Build device list...
Init environment...
Load IDBase v124493 Ok

Check for updates...
Socket Error # 11001
Host not found.
Can not connect. Disable Antivirus and Firewall

Wrong Username or P
[14:37:09] Do you have the test point
[14:35:19] Yes sir
[14:30:20] YOU canceled it
it was bad idea
[14:17:41] Meaning that tp required
[14:17:15] Answered already
[14:16:37] Kindly do as you’ve been told
[14:16:02] ok
[14:15:03] 👆
[14:14:08] still more not working sir
[14:13:13] Isp but not sure pin out not yet determined
[14:12:48] Were you the one that untick this ?
[14:11:30] Try this, flash device with same or higher build fw version
[14:08:09] Yes, solution available
[14:07:40] If you’re holding on a device where brom is being disabled meaning that you need tp, and also pray that tp should not be disabled
[14:00:38] It no longer accepts unlocking
[14:00:08] Help
[13:55:16] disable sharing tools.

and Make this https://infinity-box.com/?r=100103
[13:54:37] Send sw log text
[13:54:14] there is latest version
[13:53:55] Send sw log text
[13:53:38] model?
[13:53:18] Ok
[13:53:12] in this case check images again and apply test-point well
[13:52:30] flash with another firmware
[13:51:32] read https://forum.infinity-box.com/viewforum.php?f=18
[13:50:46] https://infinity-box.com/news/?r=4294
[13:50:15] you are using v2.27
try latest v2.42
[13:49:30] use default loaders or select another model, similar to yours
[13:49:06] Send sw log text
[13:45:49] Found 1 file 1f227dce
1. recent_20_MT6765_CPH2015EX_11_A.33_200526_1f227dce

[13:44:31] wut?
[13:44:12] test point was tested by many people
wha is your problem?
[13:43:13] select loader for another model, similar to yours

install https://infinity-box.com/news/?r=4294
try loaders for different models
send result here
[13:42:46] support, support, you must learn how to use.
use search and select another fdl
[13:39:35] ؟؟؟؟؟؟
[13:37:54] Spd2 fail Fdl not started
[13:37:35] Cm2 spd fail
Fdl not started
[13:37:09] Help
[13:37:06] Itel A661w frp problem
[13:27:28] Not support direct FDL ERRROR ,when fill FDL same error
[13:24:10] https://infinity-box.com/support/
[13:21:18] Please I need link to download cm2mt2 v2.42
[13:14:38] what is the problem?
[13:05:24] Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[13:05:02] About one hour waiting for unlock Zte a31 lite
[13:04:23] maybe
[13:03:58] run CM2SP2.exe
[13:02:56] Ta-1385 (105 4g) network unlock
[13:02:40] Bf7 test point please
[13:01:54] you can search for posts about g20 here https://forum.gsmhosting.com/vbb/f296/
[13:01:24] check Infinity server, you will see test-pont there
it means something...
[13:00:55] Nokia 1385
[13:00:12] check Infinity server, maybe firmware is there
[12:58:57] what phone?
[12:58:13] install libusb
[12:57:14] select loader for another model, similar to yours

install https://infinity-box.com/news/?r=4294
try loaders for different models
send result here
[12:56:07] Make this https://infinity-box.com/?r=100155
[12:50:52] Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[12:50:09] support, support
[12:49:49] Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[12:49:44] Itel A58(A661W) FDL ERROR last security infinity not support 😢
[12:42:30] Help me please
[12:42:01] Nokia 3.4 password any solution
[12:38:50] Kindly check on HalabTech
[12:38:08] Can you share the one you used maybe different from the others
[12:37:40] Wait for complete
[12:37:25] Status executing
[12:37:24] Model
[12:36:44] Kindly install cm2sp2 bootpack bro
[12:35:47] Help
[12:35:44] Do not accept to submit again
[12:33:10] I texted you dm
[12:32:47] What about this
[12:32:37] Response.
[12:32:32] Wait for servers.
[12:30:51] Zte a31 lite
[12:30:31] Model
[12:29:00] 30 min ago
[12:27:47] Please admin
[12:27:37] Login iOS check status when show completed repeat unlock
[12:27:20] Thanks.
[12:26:47] 30min spending phone not unlocking
[12:26:39] Repeat unlock
[12:26:32] ok
[12:26:00] What I send you
[12:25:48] See me
[12:25:33] Nokia
[12:25:19] Username 00DDDDBB7B
[12:25:07] I canceled a phone without realizing it

Imei 356748979185406
[12:24:57] How to update please
[12:24:39] See me
[12:24:21] Help
[12:24:19] Boss hel0
[12:24:13] Update bro
[12:14:01] paid
[12:12:15] Please admin help
[12:11:35] What cause This Eror
[12:08:21] Contact me
[12:00:53] we not support Kirin CPU
[12:00:09] YouTube might help
[11:59:46] You mean ?
[11:51:31] Only PreLoader showing
[11:19:25] first disable sharing tools

after that Make this https://infinity-box.com/?r=100103
[11:19:14] Ok do this
[11:09:41] X6517 fdl file please somebody help
[11:06:29] Download backup file for your device http://dl1.infinity-box.com/00/?dir=nvram/
Unpack it
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[11:04:25] Please I need test point tecno BF7
[11:02:39] Same as X665 but if yours didn’t work meaning that your tp has been blocked
[10:59:12] Fixed?
[10:59:07] Please how do I correct this error trying to flash sthe phone camon Cg6
[10:54:48] Check on HalabTech
[10:51:54] When I connect phone showing this issues sir
[10:51:07] How to Repair vivo y21 android 12
[10:50:00] Yes . @libimobile
[10:49:58] Plz what the cause of this error trying to flash Tecno camon 12
[10:37:22] Password?
[10:36:08] I have same phone that’s not booting up because i flashed with a firmware i downloaded from random website!
Now, i want to read another s18 firmware in other to load it with it .
[10:29:44] Model?
[10:29:21] Only preloader
[10:19:57] Nokia G20 da file
[10:17:40] Working boss, but lesser amount might be acceptable
[10:14:42] But lesser amount that is reasonable might also be acceptable
[10:12:36] Sure you can try if brom not disabled
[10:12:19] Dongle activation
[09:58:57] Please can I remove passcode from Infinix android 10 without data loss
[09:58:33] Hey looking for Nokia c31 isp pinout
[09:55:28] Please test point Tecno bd4h
[09:50:56] Please can I remove passcode from Infinix android 10 without data loss
[09:43:55] Tecno bd4h test point
[09:06:46] TA1312 testpoint
[09:03:24] Help
[09:03:22] Cm2 not Working MTK 2
[08:59:07] ta1312 test point
[08:57:37] Kg5j test point not working any help please
[08:20:44] need help here
[07:54:23] TECNO KG5J TEST POINT NOT WORKING SOLUTION CM2
[07:47:13] Where are you response cm2
[07:43:30] OPPO A31 (CPH2015)
MT6765__CPH2015EX_11_A.33_200526_1f227dce
File Upload Done
This Build Not Available On Infinity Server But IOS UPLOADER SHOW ALready exit
[07:39:43] thanks
[07:39:19] maxs
[07:33:41] Thanks u
[07:32:28] Found 4 files CC7-H626ABC
1. recent_MT6765_TECNO_MOBILE_LIMITED_TECNO_CC7_9_CC7_H626ABC_P_210318V413_PPR1.180610.011_cc7_h626
2. tecno_CC7_H626ABC_P_210719V427
3. tecno_MT6765_TECNO_MOBILE_LIMITED_TECNO_CC7_9_CC7_H626ABC_P_200414V276_PPR1.180610.011_cc7_h626
4. [07:31:54] Ok friend!
[07:23:53] Please next update
[07:21:30] CM2 SPD2 SETUP
[07:20:18] Infinity support we need update on unisoc bootloader unlock options
[07:18:17] We need update
[07:17:00] Use SP flash tool and format all
[07:16:07] CC7-H626ABC-P-210719V427
[07:15:03] tecno cc7 firmware share pliz
[07:14:43] Modem meta
[07:04:29] any one have Lava Z21 Latest Flash file
[06:38:16] I had the same issue I even used the firmware but not working still
[06:32:10] See me dm
[06:32:02] Please help. How do i remove frp on samsung a13 binary 3 on android 13version? Chipset is Ezynos
[06:31:54] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[06:31:54] Inbox
[06:31:36] Please help me
[06:31:24] Ezynos
[06:31:01] Chipset?
[06:30:06] Please help. How do i remove frp on samsung a13 binary 3 on android 13version?
[06:03:02] Help please
[05:49:05] Make i sha dae look 😎
[05:30:27] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[05:30:27] Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>>   ERROR : FDL NOT started!

>>>  Error : Fail to boot FDL!
>>>  Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

how to fixx this err
[01:40:09] Tecno BF6 MDM
[01:39:53] Hello

InfinityBoxTalks 2023-04-02

[22:45:25] Is this really possible without test point or opening the phone at all?
[22:40:35] Nokia 2.4 ta-1270 firmware please, rollback warning error
[22:39:40] Hello
[21:52:34] It stop identifying
[21:52:26] My cm2mT2 not working
[21:51:27] Help me mobicel legend Max fld I want to remove frp
[21:10:15] Seen
[21:08:43] Available but paid
[21:08:08] Yes 💯✅
[20:57:05] I have same version 78 too not booting
[20:47:48] no! i\'m still looking for solution
[20:38:01] archos ac45dpl platinum after remove frp In the interface it completes successfully but does not skip it
[20:32:13] Help any one



Pop 6
[20:19:08] Yes and I connected well. the problem arose when i reinstalled windows on the PC
[20:11:58] Please anyone help me with fdl file for itel p651 or link to download
[20:10:00] Did you sign it before?
[20:08:21] Help me with fdl file for intel p651
[20:06:58] I talk about this
[20:02:13] Type: Infinity-Box/Dongle [CM2]
S/N: 67522AA7
Username: 0067522AA7
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0155; Expired: 19-Jan-2024