Infinity CM2, Infinity [BEST] @InfinityBoxTalks 20-Apr-2024 [page 16]
InfinityBoxTalks 2023-03-02
[15:10:55] Hot 10 or 12
[15:08:12] in fact the series does not even list
[15:01:55] You finished it??
[15:01:29] You finished or???
[15:01:00] Or you can check card reader
[15:00:47] Tecno kh7 test point
[15:00:24] Try to clean smart card
[14:59:35] Do you slice it??
[14:59:25] hi dear infinity Cm2 someone can help find the boot of an Infinity hot play MTK
[14:58:57] Diy solve you problem?
[14:56:08] Nokia c1 ta1165 frp boot select?
[14:53:23] 2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port (COM8)
MODE: BOOTROM; PORT: 8
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]
MEID: 28D6CBBC8E578B1EC870D05FDC89D322
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: 6C7510FED836E4F83CF561E9C1D42455130BCA46D4847
[14:50:36] How to unlock Nokia sl3 phone with infinity box
[14:41:59] Already disabled
[13:50:40] Help me please😫🙏🙏💓
[13:48:14] help here
[13:48:06] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Safaricom : NEON_RAY_PRO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
[13:47:07] Please i want to use FASTCHECK to erase frp from Nokia c1 ta1165 on fast boot commands. Which of the command should I choose?
[13:44:02] https://support.halabtech.com/index.php?a=downloads&b=file&id=697973 help me with this file
[13:39:04] admin HELP
[13:32:58] Set UK off using dongle manager
[13:26:30] Pl8i want to use FASTCHECK to erase frp from Nokia c1 ta1165 on fast boot commands. Which of the command should I choose?
[13:26:00] Hi help me cm2
[13:25:15] Itel s18 s663l firmware
[13:22:15] Let me snap again
[13:22:01] Check card maybe is properly fixed in card reader
[13:21:45] i don\'t use glasses
[13:20:53] downgraded to android 10 first then root
[13:19:43] select another model/loader or use PAC file as loader https://infinity-box.com/?r=100179
[13:18:34] https://samfw.com/firmware/GT-N7108
[13:13:35] Which binary is this phone
[13:06:47] Root file pls
[12:40:55] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[12:40:55] Inbox
[12:39:53] Camon 19 test point
[12:39:01] Ci6 test point pls
[12:37:16] LE6 TESTPOINT PLEASE 🙏
[12:32:50] A661w pls help oh fdl am not getting it it stuck at kick fdl
[12:21:22] it\'s good site
[12:20:32] https://samfw.com/
[12:19:59] download frm samfw.net
[12:19:30] bro please GT-N7108 flash file🙏🙏🙏🙏🙏🙏
[12:18:42] Even i cahnge computer its same
[12:18:38] bro please GT-N7108
[12:18:15] bro please GT-N7108
[12:18:15] I found this error
[12:17:20] My cm2 dongle is not working
[12:17:07] Hi
[11:54:26] hello whats the wrong
[11:54:01] Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.42
Firmware files: C:\\Users\\HICHAM\\Desktop\\A037U U3 OS12 A037USQS3BVI2 Scatter Firmware Dead Boot Repair\\
Backup files: C:\\InfinityBox\\CM2MT2\\backup\\
Backup files: 20 dirs: 0
Build device list...
Init environment...
Load IDBase v124493 Ok
Check for updates...
You have latest version [2.42] installed
Telegram Channel: @InfinityBox
Telegram Group: @InfinityBoxTalks
Account: https://infinity-box.com/service/
Wrong Username or Password - set i
[11:49:31] DM
[11:48:37] Itel p38 pro (p682l) stop at prepare target help
[11:48:13] Itel p38 pro (p682l)
[11:37:38] GT-N7108
[11:36:55] GT-N7108 or GT-N7108D
[11:35:13] Nothing found for GT-N7108
If you will get the file upload it to support with iosFileUploader
[11:34:40] PLEASE SAMSUNG GT-N7108 FLASH FILE
[11:34:28] PLEASE SAMSUNG GT-N7108 FLASH FILE
[11:34:24] Rewrite firmware
[11:34:14] You can only repair sec bro that’s the terms used
[11:32:10] The dongle has the power to replace it
[11:31:55] PLEASE SAMSUNG GT-N7108 FLASH FILE
[11:30:46] Kindly know that changing of imei is illegal
[11:30:10] IMEI
[11:29:38] SN or IMEI?
[11:28:39] I want to change Realme phone serial number x3231
[11:27:24] Samfw server
[11:27:04] Model ?
[11:26:50] Any issue faced ?
[11:26:49] chat me up
[11:25:40] So what’s the issue
[11:25:20] Found 10 files Itel S13
1. itel_S13_F8012_8.1_OP_V030_20200713
2. itel_S13_F8012_8.1_OP_V011_20180823_O11019_S13
3. itel_S13Pro_F8012_8.1_OP_V024_20190717
4. itel_s13_f8012_s13_s13_s13_MT6580_B0FB8190647A543F8A1FCE4225DDA230
5
[11:20:39] Cm2 sp2 helper available not mtk and besides what operation do you want to perform
[11:07:19] Help DA stylo bold plus
[11:04:42] WHY
[11:04:05] Good it or show info
[11:03:08] SAMSUNG GALAXY NOTE 2 GT-N7108 FLASH FILE PLEASE GIVE ME🙏🙏🙏🙏🙏🙏
[10:32:00] Samsung finance phone unlocked
[10:27:37] X6511B Mdm help
[10:27:12] rmx3231 imei repair cm2
[10:24:33] Hello Guys, I\'m looking Tecno BF7 Test-Point . Plz Help!
[10:19:19] Nokia ta1468 cm2 can unlock network
[10:15:17] reper imei SC9863A
[09:53:21] Someone help me with itel s13 firmware please members
[09:50:18] Anyone please ?
[09:50:11] C23 RMX 3624 da?
[09:35:31] Phantom 6plus format without data loss possible or not?
[09:34:53] I can get to download mode but it has kg lock
[09:22:29] Help me with it 🥺
[09:22:23] Itel P682L loader can someone please help
[09:14:03] yes
[09:12:44] How do you remove plugin
[09:12:09] You have solution
[09:01:58] Thanks
[08:53:51] i need cm2mtk helper
[08:22:33] Kindly run dongle manager, turn off Uk version and put Uk off file in module root folder
https://t.me/InfinityBoxTalks/148165
[08:19:58] 👆 check here if not found then kindly send motherboard pics
[08:18:53] first disable sharing tools
after that Make this https://infinity-box.com/?r=100103
[08:15:21] Full flash bro
[08:14:45] 👆
[08:14:32] Solution is on your screen
[08:12:26] Hello
[07:37:47] переустановите cm2scr
[07:34:25] Plz hel
[07:09:52] every time close tool
[07:00:31] hello infinity team i can\'t use my cm2 scr tool please help me
[06:45:45] Fast close ather tool then try
[06:33:39] Help help help
[06:33:26] CM2 forclosing after click any job help
[04:47:37] Ok
[04:46:55] .
[04:46:51] You wanted to boot, this one.
[04:45:36] Can it work to flash nokia c1
[04:45:33] I have.
[04:44:45] Infinity #CM2SP2 boot-pack v1.16 with updated loaders https://infinity-box.com/?r=19&dir=/software
[04:41:47] Hello Friends i need help to get cm2 v2.14 with loader. Help a poor trying brother
[03:57:17] I need test point infinix hot 20i x665c
[00:21:26] Nothing found for s Samsung A032f
If you will get the file upload it to support with iosFileUploader
[00:19:41] A032f /files
[00:18:53] Samsung A032f
InfinityBoxTalks 2023-03-01
[23:43:57] Nokia N152DL: supported?
[22:02:33] Help how to fix this problem
[22:00:23] CM2 forclosing after click any job help
[21:15:16] admin
[21:14:27] Thank you
[21:13:54] X665B
[21:12:35] plz share
[21:11:52] 🙃
[21:11:46] nokia c20 frp remove need fdl1 and fdl2
[21:11:21] hello
sc9863a fdl1 and fdl2 plz need
[21:09:07] Password is 1111
[21:03:54] 1111 is password
[21:03:21] !!
[20:56:38] https://dl1.infinity-box.com/00/pub/?dir=/software
[20:55:36] How I can download platform detector inifinyity!
[20:53:29] Hi please whats mean that!
[20:47:05] Tecno spark 8p Boss i want to read the flash
[20:46:04] Thanks BOSS BUT I ALREADY DO IT
[20:21:05] Try unlocktool
[19:58:04] hi ! can any one help pls i will apriciate it
how can i flash or reset XIAOMI f21S ?
and what is the Bkey ?
which model to use ( i mean even the cpu i dont know
thank you in advance
[19:55:20] X665
[18:55:26] What do think?
[18:54:57] Run the software as an administrator and retry the job
[18:53:14] Pls solution to this Boss
[18:41:56] wrong group
[18:31:21] My iphone X is completly dead after bypass... unlocktool
I press the power button many time
bypass is successfully done unfortunately it doesn\'t save the log...
it stuck on mount but when I press the vol - & power button it automatically bypass done.
but after that I dead. blackscreen
what is the solution of this.
[18:04:16] Plis Vivo X7 plus firmware anyone help
[17:57:45] Come
[17:54:48] Oppo cph1941 msm tool i need pls and pls
[16:59:21] ?
[16:56:37] Please pv
[16:48:51] Firest unlock
[16:48:45] Just unlock bootlooder need
[16:48:27] Hi
[16:46:52] Please help🙏
[16:46:27] System destroyed
[16:45:51] Redmi 10a scatter file
[16:34:31] What model
[16:34:01] Unlocktool via test point
[15:56:18] Found 26 files Nokia C1, search limit is 20 files per server
1. nokia_c1_2nd_edition_ta_1380_sc9863a_test_point.jpg
2. nokia_c10_ta_1342_test_point.jpg
3. nokia_c1_2nd_edition_ta_1380_sc9863a_isp.jpg
4. nokia_RM_1019_02060.00000.1505
[15:50:08] Nokia c1 2nd edition TA-1380 Flash file please
[15:47:44] ?
[15:43:33] Admin???
[15:38:07] This phone no need test point
[15:25:39] X6819 test point pls
[15:15:02] Kindly try to make sure You\'re flashing the device with same build details present on the device, and also select the pac as fdl manually
[15:13:17] Please test point
[15:10:22] Anybody help with bootloader for tecno KD7 i want write file on it.
[14:50:35] Yeah
[14:39:03] Flash with a file
[14:38:58] X665
[14:38:58] Infinix x655
[14:32:57] Flash wit factory signed firmware
[14:32:48] Possible to have a download link?
[14:32:48] Go to mt2 and click DL
[14:31:33] Full flash file
[14:31:00] what can be the solution
[14:29:34] Ok
[14:25:28] Frp unlock solution is needed
[14:23:47] Samsung a03 u1 frp cpu boot is needed
[14:23:06] Frp file??? Or
[14:08:27] No download mode or stuck?
[13:43:05] I nedd a a032f pac file, the one in the database has bricked the phone
[12:51:12] ....
[12:47:25] Flash with firmware, remove Plugin afterwards
[12:40:35] yes
[12:29:34] Kirin CPU
[12:29:17] DM, I think mentioning another tool not permitted here
[12:21:31] Can you please consider adding Huawei module with Kirin cpu?
[12:00:40] A58 lite easybuy bypass any solution
[11:45:37] https://dl1.infinity-box.com/00/?dir=&search=Tecno+Lc8
[11:10:36] Please I need help
[11:10:26] Tecno Lc8NV ram
[11:08:56] Lc8 nvram
[11:08:46] [SIZE]: Market: 8 GB
[SIZE]: Actual: 0x1C8000000 [ 7.13 GB ]
[EOL]: EOL status : Normal ( Less than 80% reserved blocks used )
[EOL_A]: SLC status : End of Life ( READ-ONLY )
[EOL_B]: MLC status : End of Life ( READ-ONLY )
tecno sa1 H/W report what does it means emmc dead need to replace
[11:01:59] https://easy-firmware.com/index.php?a=downloads&b=file&id=410909
[11:01:54] hello can i find this firmware on support area
[10:52:39] Model?
[10:31:23] Yes😳
[10:21:55] Tecno kg7h tp
[10:21:10] Password forgotten sir
[10:18:27] Please can anyone help me with the test point x6511b
[10:14:44] Spd has test point too
[10:13:17] SPD with test point??
[10:12:57] SPD boss
[10:04:58] TESPOINT
[09:59:01] Good morning house, how can I remove password in Nokia 1.4 it\'s a Snapdragon cpu
[09:57:57] Testpoint
[09:55:29] Infinix x6511B fdl error solution please
[09:55:03] What is the solution?
[09:54:29] The shop now??
[09:36:02] 😎
[09:15:57] You guys need to learn this flashing of a thing.. software is beyond flashing
You don\'t mark Preloader while flashing... Your phone will be dead
[09:14:43] Found 4 files A032F
1. samsung_a032f_test_point_sc9863a.jpg
2. samsung_sm_a032f_test_point.jpg
3. samsung_sm_a032f_A032F_m168_Natv_userdebug_native_SHARKL3_LK_R11
4. samsung_sm_a032f_sm_a035f_wipe_frp_a032f_a035f_wipe_frp
[09:11:40] Use pac file?
[08:58:56] huawei frl-l22 dead boot cant read fw cant flash stck on DA:Agent started
[08:56:02] The device is now dead
[08:54:29] Hello
[08:43:37] Check the file if correct
[08:37:50] Tecno BE7 TP anyone help with it?
[08:24:33] oe
[08:21:23] mkuu
[07:57:30] Guys am trying to flash A032f password and frp but still no change am using cm2sp2, still frp exist after erasing it, what could be the possible solution
[07:48:27] Use PTD to know the CPU,
Make used of ur cm2best.
[07:37:10] Which boot should i use for tecno KD7?
[07:25:23] Please infinity team plz their something I would want you to help explain to me...theirs something called easybuy in Nigeria where you buy phone on loan and if failed to pay they will remotely lock the phone, even after flash it won\'t still go although we normally succeeds in temporary removing it but after some months it may still come back, but my questions is on which partition is those locks? Is it NVRam ,efs,rpmb,or user data? Plz help me understand the actual partition ...thanks
[06:56:55] Still the some thing sir
[06:47:21] any one with tecno kg5j DA for new security
[06:46:52] try to identify first
[06:43:08] Still not working or going
[06:40:04] do flash format
[06:27:44] how to repair imei nokia TA-1234 by cm2 anyone help me please?
[06:14:33] anytechnician kenya
[05:32:28] Hav been trying to flash this infinix pR652b phone but keep giving me this error on pmt
[05:07:32] Here it stops Bot does not work for phones Try several phones
[04:54:38] 👆with low price.....
[04:49:44] Hello on iphone 6s plus...
[04:35:44] Ok Sir Thanks for you
[04:30:06] Hi please help
Need boot rmx3624
[04:11:57] look on my profile. always available
[02:53:48] Yes I have, the tool,cm2best,
Please help me with the file
[02:50:51] I want to flash my s18 can you help me with guide. I have the file
[02:43:20] Pleas DM verification and download error any tool?
[02:40:59] I will like to have your contact please
[02:39:10] Yes I have
[02:23:13] Phone brand and model?
[02:17:18] X6511b v78 has anyone successfully flashed it? MDM please?
[00:12:30] I will flashing this wrong file, after flashing display black screen...
InfinityBoxTalks 2023-02-28
[23:33:58] What is that \"same problem\"?
[23:32:57] It looks like you want to be banned here. Open your eyes and look at chat name
[23:30:41] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[23:30:05] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[23:27:03] You can start here https://www.youtube.com/watch?v=01OuuYyrik4
Search is really good thing
[23:22:21] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[21:55:57] just bricked samsung A52pro.I have a back using cm2mtk but failing to flah.its mtk6582
[21:15:33] u have hmd nokia tool to flash this device?
[21:15:05] How can I fix this issue please
[20:53:59] I heard no response to my request, admin please,
Nokia ta1235, as no file on iOS, any solution phone hang at logo.
[20:43:39] cm2
[20:25:19] https://forum.gsmhosting.com/vbb/f296/itel-a33-plus-a509w-3095868/
[20:21:21] Which tools can reset itel a661w
[20:20:32] Brothers whats testpoint where can i learn it
Pls i have Infinix x665b i cant flash always showing check drivers or use testpoint pls
[20:09:00] yes brother. use test point. i know brom is giving you headache
[19:42:53] Is there any way to hard reset Tecno CI6 I need your help
[19:41:58] Nope
[19:35:36] Did you fix u own?
[19:34:34] Please friends help me please
[19:22:40] Infinity Cm2
Spreadtrum 2.14
Pmt error .
Infinix X6511B
[19:14:00] Vivo y1s preloader anyone?
[19:10:45] Found 3 files Vivo y1s
1. vivo_y1s_2015_test_point.jpg
2. recent_MT6765_10_QP1A.190711.020_k65v1_64_bsp_vivo_y1s_2015_PD2014F_EX_A_1_13_2_7
3. Vivo_Vivo_Y1S_2015_PD2014F_FuntouchOS_10.5_PD2014F_EX_A_1.13.27
[19:02:21] Is there any way to hard reset Tecno CI6
[18:37:59] MEIZU M3X MTK CM2 no support to SMART RESET EXTRACT JUMPING BROM , help plz
[18:34:31] Nothing found for s663l
If you will get the file upload it to support with iosFileUploader
[18:32:05] People help me
[18:31:05] S18 firmware s663l
[18:29:57] ITEL S18 S663L FIRMWARE B
[18:19:53] Brother before you com please think anyway thanks 🙏
[18:15:37] You are making mistake
[18:14:19] Oh man all phones remain as pictured
[18:13:25] You make work to become difficult . Cm2 support if not 8 just select correct cup and loder that all
[18:09:46] All phones have the same problem, not one type
[18:09:18] Note 8 ??
[18:07:01] Used extanl preloader
[18:06:33] realmi and redmi 8
[18:05:03] What it this model??
[18:02:15] all module
[17:58:35] Even you make mistake check USB cable
[17:48:26] Model
[17:47:08] ؟؟؟
[17:46:23] Ufed 7.62 keygen available 75$
[17:45:53] stops here all phones don\'t bot
[17:28:24] https://www.mediafire.com/file/aemx042q48745d3/Coolpad_1804_7.0.009.P1.1812192002.1804.HD_HD_1804_OE.NOEFUSE_BY_GSM_RONY.rar/file
[17:23:10] Is it possible to remove kg lock on a037f u1 with firmware flash via odin? There is a site posting the file, not sure if it works
[17:21:01] Thanks 🙏
[16:52:34] U can try both without or with test poin
[16:51:39] Config
[16:51:15] Loading confident from server
Meaning online
[16:50:23] Are u sure of what ur talking
[16:46:40] Same problem 😢
[16:43:19] Sir no sir
[16:43:05] You do back up fw.?
[16:41:54] Frp , write wrong file only black screen
[16:41:23] Problem brother before
[16:41:14] Spreadtrum SC9850K
[16:39:07] Spd
[16:37:40] cpu
[16:33:54] By test point?
[16:33:10] Wrong
[16:32:25] Enjoy
[16:32:19] Download cm2 helper tool, your PC must have internet connection,, run tool select option wipe data,,, insert USB to the phone.. All done
[16:31:21] Please disable you security and try
[16:30:54] This file required... Any body plz share.....
[16:29:26] Rest
[16:28:35] Sps stands for sharif phone services.. I know the guy.. I have a lot of his files
[16:27:51] Pls any solution
[16:18:53] Ok sir you have a video guide please
[16:07:28] No pawssword
[16:06:41] Check well this is factory signed
[15:59:34] SM-G977N VBMETA U6 OS11 [G977NKSU6FUH3].zip
Need this file urgent
[15:55:57] I have this exact file from sharifofuganda
[15:53:46] https://support.halabtech.com/index.php?a=downloads&b=file&id=504026
SM-G977N VBMETA U6 OS11 [G977NKSU6FUH3].zip
Need this file urgent
[15:53:20] https://mega.nz/file/d5oTRQYa#GNAZCIO2fJ0hMGTV7eBCpM7g8IjFfE1LPjuGChTPH_k.
Used this only cm2 support .....
[15:51:22] Use Cm2 Helper tool
[15:50:06] Yes I have 3 files
[15:48:01] subject
[15:47:22] 🚨🚨🚨🚨🚨🚨🚨🚨
Scammer Alert
Don’t deal with this mother Fucker
https://t.me/Andanje26
@Andanje26
🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨
[15:46:42] This is the phone???
[15:45:53] hello everyone please help me to factory reset ta 1418 nokia g21 by cm2
[15:44:26] But cm2!! Thy can even tell u to download a 3Gb file just to be able to boot a phone
[15:43:17] Some other tools u don\'t need preloaders nor fdl files to boot latest phones
[15:42:51] Exactly you can say like that
[15:42:14] Thy should improve in there work
[15:41:23] Brother please don\'t blem cm2 team but you are making mistake brother
[15:40:53] U mean pr652b is the only device that have pmtming error
[15:39:11] I have no reason to lie bro I still have the phone with me Though cm2 after unticking pmt flashed only 2 files then now its not powering
[15:38:26] how can Pr652b become MTN smart????
[15:36:48] You are laying brother
[15:36:25] 😳😳😳
[15:36:04] Then it gave me this error
[15:36:00] Fast check emmc sem like Dead
[15:34:51] Powered the phone on but did not finish booting then decided to flash file
[15:33:49] Then?
[15:33:33] I hard resetted it manually but not successful
[15:32:54] So it mean you do it manually without using cm2 ???
[15:32:50] Read carefully
[15:32:15] What are you talking???
[15:30:50] Nop
[15:30:40] The problem was hang on logo, hard reseted it manually then it was like finishined but not displaying but buttons lights up
[15:26:05] Did you later fix it please
[15:25:01] But what was wrong before flash?
[15:24:16] Send here Logo I helpe you
[15:23:25] Selected bro even identified successful but did not flash
[15:22:25] Or you can send logo tax
[15:22:16] Try here @FlashFileSearchBot
[15:22:16] need file
[15:22:08] Exe Version: Avengers Qualcomm Module 0.12.8
Operation: Read Info
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM17) detected.
Hello received.
HW ID: 00000000E1B00600 MSM8940
PK HASH: 77A22B92A1BCD0C4D3AAA10AA9F1B2C36D51C0CA7429B5201D0FD1D5F5B53BBC
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8937
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Read
[15:21:44] Cm2 support that model it simart MTN just select correct cpu
[15:17:06] Same error happened to me today while flashing a mare MTN M561M3... Annoying cm2
[15:15:12] U mean its not powering
[15:14:25] So annoying
[15:14:14] Can\'t even boot a mare Tecno CH6 other tools one click
[15:10:54] I loved cm2 but my love is fading slowly
[15:10:19] Yet other tools boot even without preloader
[15:09:20] U hear get preloader bla bla bla
[15:08:55] Cm2 is disgusting now days can\'t boot most latest phones
[14:54:56] After removing kg5j shield to access test point, phone shows blank. Any solution please.
[14:52:27] What was problem?
[14:43:15] Please friends help me out please
[14:40:57] MDM
[14:19:54] Infinix x665c test point needed
Infinix x665c test point needed
[14:03:42] Trying to flash infinix pR652b but given me this error
[13:04:52] Found 3 files Huawei tag_al00
1. recent_MT6753_HUAWEI_HUAWEI_TAG_AL00_5.1_TAG_AL00C92B168_HUAWEITAG_AL00_hq6753_66t_b2c_l1
2. huawei_tag_al00_MT6753_B2E495FDFC3C0AC9ED4D1033721E0E78
3. huawei_tag_al00_MT6753_3DD9603FE6990E56E087B36D7F0E2516
[13:04:10] Found 20 files Huawei tag, search limit is 20 files per server
1. recent_MT6753_HUAWEI_HUAWEI_TAG_AL00_5.1_TAG_AL00C92B168_HUAWEITAG_AL00_hq6753_66t_b2c_l1
2. recent_MT6753_HUAWEI_HUAWEI_TAG_TL00_5.1_TAG_TL00C01B125_HUAWEITAG_TL00_hq6753_65c_b2b_l1
3. huawei_honor_MT6735_HUAWEI_HUAWEI_TAG_L21_HWTAG_L6
[12:53:18] I want to root my iPhone 14 Please
[12:52:52] Found 26 files iPhone 13, search limit is 20 files per server
1. recent_MT6580_alps_mp_m0.mp1_V2.34_hct6580.weg.c.m_P147_IPhone_13_Pro_Max_clone
2. recent_MT6753_iPhone_i13_Pro_Max_6.0_alps_mp_m0.mp1_V2.39.1_aeon6753.35gu.m0_MRA58K_aeon6753_35gu_m0
3. recent_10_MT6580P_iPhone_13_Pro_MAX_iPhone_5.0_ALP
[12:45:08] Found 2 files a661w
1. recent_A661W_V390AE_11.0_OP_V020_20221021_1151
2. itel_Itel_A661W_V008_220216_11_SPD
[12:39:09] Oh
[12:38:30] Yes, but you and I have already discussed this problem
[12:33:08] Selected right model
[12:32:14] Hi, not reading, maybe need new driver?
[12:27:45] I can fix this too
[12:26:28] Since I updated cm2mt2 2.42 my pc restarts in blue screen I tried everything but it\'s still the same 😪😪
[12:17:58] Thanks, this fixed my problem
[12:02:22] How do I change this things
[12:01:07] I can help u
[11:56:09] Simple
[11:55:28] I can fix this
[11:52:56] libsusb install
[11:51:48] Any help please , all others CM2 product (CM2MTK , CM2SP2 , ….)
Working fine , just MT2 not working
[11:42:35] Who can bypass palmpay and have multiple self referral, in one phone talk,. I have deals worth 500k
[11:33:31] Nokia 1380 network lock
[11:15:04] Please what\'s the meaning of this error message, my PC is connected to internet and my username and password is correct
[10:43:42] How to change imei oppo a16 cph2269?
[10:43:00] Vivo Y33s frp done with CM2 MTK ✅
[10:38:35] Can cm2 support TECNO PHANTOM X2 TO FLASH IT
[10:38:14] Can cm2 support TECNO PHANTOM X2 To flash ot
[10:37:53] Hello friends
[10:36:11] please help me
[10:36:07] hello meizu m6 dead after flash global ,can i revive this phone?
[10:30:22] Software
[10:16:56] Im thinking of returining it back to customer thanks sir
[10:16:27] X6511b mdm
[10:12:49] Ook
[10:12:49] Or emmc damaged
[10:12:33] Try to re-flash it.
[10:12:09] Huawei Y600-U00
[10:11:58] Is this hardware or software problem??
[09:44:47] With tp and extanl preloader
[09:41:11] oppo A59M After convert F1S- No Service Showing Plz Solution??
[09:38:15] Help on this. INFINITY NK2
[09:36:27] Wait for phone...
Connect Ok!
Device Found!
Initialize ...
Initialize Ok!
Looking for SVC package in local database ...
SW : E1M-0650-0-00WW-B01
Package : E1M-064I
Device : E1A ( E1M )
BLType : RETAIL
SecVer : 04
Device authentification ...
Processing server operation ...
Connecting to server...
Connection faled: Socket Error # 10061
Connection refused.
Disconnected
Error : Server Connection failed! Connection error or bad credentials?
Check previous message for more info!
Reconnect Power/Cable!
\\
[09:33:08] @Abdulwasii_remote_tech_service
what could be the problem here. help
infinix x626
[09:27:19] Error
[09:21:20] Is not working
[09:20:46] Yes. Bro
[09:20:14] Logs ?
[09:15:43] Check if brom detected if no, then tp required
[09:15:09] Download from the site you see it bro
[09:06:04] Okay dear
[09:01:33] I did that. any other solution??
[08:53:57] Dear, on easy buy phone, I use solid explorer, and package Disabler pro+ it refuse to delete it, I need help admin and gurus please help me,
[08:52:56] On easy buy phones
[08:51:01] I use solid explorer, and package Disabler pro+ it refuse to delete it, I need help admin and gurus please help me,
[08:42:54] Easy buy tools APK and adb please I need help
[08:31:50] Tecno KF6j Spark 7 FRP
[08:29:16] I appreciate you always
[08:26:38] Plzz share this file
[08:20:24] Found 5 files PR652B
1. infinix_SP9863A_11_PR652B_F6317_11.0_OP_V049_20211102_RP1A.201005.001_PR652B_Infinix_Smart_5_Pro
2. infinix_PR652B_F6317_11.0_OP_V036_20210708
3. infinix_PR652B_F6317KE_11.0_KE_V004_20210901
4. infinix_PR652B_
[08:20:01] Paid bro not free
[08:19:30] pr652b
[08:19:09] Motherboard pics ?
[08:18:50] Full flash bro
[08:18:22] Model number ?
[08:18:12] Use the fix bb button on Cm2mt2 service tab and follow the instructions if not then get a factory signed fw and flash
[08:16:56] smat 5 pro flash fiel
[08:16:30] Download backup file for your device http://dl1.infinity-box.com/00/?dir=nvram/
Unpack it
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[08:10:43] Type: Infinity-Box/Dongle [CM2]
S/N: 2FBA21B6
Username: 002FBA21B6
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0154; Expired: 21-Jan-2026
#3: Infinity [BEST]; Firmware Version: 0123; Expired: 06-Feb-2022
[08:10:24] Name how to use it
[08:10:00] Tools please
[08:09:50] Tecno KG5J new update testpoint does not work blocked any one with solution?
[08:09:17] It can work permanent, but you will not reset it, DM for tool
[08:08:22] Test point does not work
[08:07:52] https://forum.infinity-box.com/viewtopic.php?t=4393
[08:06:50] Frp?
[08:06:44] Infinix kd7
[08:05:33] Motherboard pics?
[08:05:02] Model?
[08:01:26] I have easy buy to unlock but it always come back please any perminent solution
[07:32:17] Check your password
[07:10:22] Hi admin please help I\'m not able to use my credit or to see it
[07:09:01] Hi admin please help me i can\'t see my credit and averytime saying wrong password and wrong username
[06:09:36] support please inboxx me
[06:08:42] cm2 dongle is blocked help me?
[05:29:16] Any salution team
[05:28:37] Vivo y75 frp unlock
[05:05:32] any administrator? or the owner of the tool?
[04:25:50] enter but not work user password wrong
[04:21:54] ?
[04:08:14] enter but not work its wrong
[04:05:54] Enter login&pass
[04:03:51] 🆘
[04:03:28] 🆘
[03:52:13] ?
InfinityBoxTalks 2023-02-27
[23:16:09] Cm2spd2 wake up and collect your money
[23:12:42] Tool says done,but the phones still has frp
[23:12:11] I\'m trying to remove frp on A042f but no success
[22:39:36] Hi spd lates phones not support loaders it said GEN:LOADER NOT SUPPORT THIS FEATURE
[21:04:07] Pls help infinix x665b imei repair
[20:17:08] Where is the support team?!😕
[19:56:59] It didn\'t work
[19:44:20] Used dangle manager to fixed
[19:13:58] hello >👋🏻
A month ago, the problem was not resolved without any reason. This message appears to me: the system has been formatted, but completely and the problem has not been solved⁉️
[18:39:17] Like model??
[18:10:37] What about the issue of fdl error on some latest spd version
[18:08:41] Tecno ci6 reset any solution
[17:42:38] oppo a12 flashing stack vinder super file stack what problem any redmi oppo mst tool flashing done
[17:25:14] Nokia ta1235
Not supported with cm2/best, please solution
[16:57:37] You will get burn send here video steps by step
[16:56:15] Have anybody text this file and it pass kick fdl here?
[16:50:26] Look like you don\'t know what you are doing
[16:45:43] Am waiting?
[16:43:44] Very laying send here video steps
[16:43:03] When flash still showing kick fdl
[16:42:47] Yes extract with password
[16:42:33] Type password it . LISA
[16:41:44] File it protected with password send you videos here know
[16:39:50] What are you doing do you extract the file because file it\'s on iso you do???
[16:37:29] What are you saying?
[16:24:14] @libimobile help me here
[16:19:17] Try here @FlashFileSearchBot
[16:19:17] need file pac samsung bit1 A03
[16:18:41] Dis not working
[16:09:17] Pack file as fdl same
[16:07:59] A661w kick fdl even with pac file as fdl same
[16:05:46] Pls A661w fdl file
[15:58:27] Any way to hard reset it??
[15:16:58] Do you have pac file??
[15:11:34] I selected
[15:04:54] Select correct pac file
[15:04:21] With taste point and extanl preloader???
[15:01:44] I try its failed
[15:01:21] X6511b stop at kick fdl
[15:00:13] Used cm2
[14:58:07] Nokia ta 1235,
Not supported with best/cm2.... solution pls
[14:52:45] Mtk
[14:52:29] Kg5j frp help?
[14:48:02] Need schematic for rent
[14:30:55] X6816 test point please
[14:29:12] Feedback
[14:23:50] https://mega.nz/file/W5UGwBSC#O4cdRKO1x6RAp-0IoIX99zKSn6t2WTYCgvRaq14doXk
Extra with WinRAR password .LISA
[14:11:52] what is this error, and how to fix it
[14:08:47] oneplus nord ce 2 not flash mt6877v cpu
[14:05:17] Hi need help
[13:57:11] How to fix infinix x606c unknown baseband
[13:56:26] Dra-l21
[13:48:19] Any help
[13:46:19] Use other tools
[13:45:19] Software engineer is more than buying PC and install software Applications on it.. it goes beyond those scope
Additional, many aren\'t aware of latest security patches like TESPOINT and ISP PINOUT method
Please Learn before you earn... It gonna help individual to become a professional
[13:43:41] If you fail to learn, you gonna fail to repair customers phone\'s... Not only learn but learn wisdom and tricks from your Tutor
[13:42:57] Secondly, most don\'t know how to flash or repair phones but just jumped into Software engineer work
[13:42:18] Reason CM2 developed Platform detector software, that will help you to know if your phone is MTK, SPD or QLC
[13:41:23] Most Software engineer can\'t differentiate between different CPU and the software they will use to unlock the phone
[13:40:47] Works
[13:40:41] Most complains I saw here is because some software engineer were not tutored very well on how this software world
[13:40:04] Testpoints
[13:21:36] Itel L6502
[13:21:07] Itel l6502 flash failed
[13:10:02] Send me fdl le6h
[13:03:02] Problem instalation new dongle
[13:02:21] Hello ,help me plase
[12:11:06] Infinix hot 12 play model:x6816 open cm2sp2 identify device while holding a vol- after that navigate to services select reset protection and unplugged device from USB cable then hold vol-again and click format efs/to reset it connect device 👏✅
[11:49:23] Pls drop the name
[11:44:37] X6511B Latest Security not working now, FDL not running using OLD loader, if use new loader FDL from firmware says Wipe failed and cant sync with authentication server, please fix about new secuirty latest update for this model
[11:40:11] help me itel l6501 fdl file
[11:39:14] But its activate
[11:38:58] Need Activation
[11:38:11] Guys my dongle say
Smart cars has not active dongle
[11:37:40] Tecnk le6 test point
[11:36:42] Type: Infinity-Box/Dongle [CM2]
S/N: 576F2D41
Username: 00576F2D41
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0154; Expired: 03-Aug-2023
[11:29:30] Help on how to remove frp on infinix X6816 MTK with cm2
[11:26:24] Tecno kg5p test point
[11:21:43] no
[11:15:26] Anyone with unlock tool
[11:06:50] Is it possible to unlock network on Nokia C1 2nd edition(TA-1380) using CM2 dongle
[10:58:38] Updates are many but creative development of the interface is less. feel boredUpdates are many but creative development of the interface is less. feel bored
[10:55:01] umt and paradol both support cm2 scatter.txt file and ofp
[10:52:29] how can cm2 develop a version that runs oppo via ofp...but it\'s okay to run the scatter.txt filehow can cm2 develop a version that runs oppo via ofp...but it\'s okay to run the scatter.txt file
[10:45:05] i need mt6750 nvram
[10:29:33] Vivo v23e frp
[09:05:22] Yes spd also have test point
[09:03:15] Y83 PD1803BF Security Repair Done But Didn\'t change on mobile
I\'ve try UnlockTool & umt_Mtk v0,2
after reset I hard reset the device but didn\'t help me.
[08:54:38] fault.bin
not found broo plz help me
[08:53:32] Sure there is
[08:53:26] Use any cf root
[08:42:51] G928c samsung root file u4 anyone have
[08:40:48] Support
[08:29:43] Cm2 sp2 add bootloader unlock 🔓
[08:14:53] Authentication stage Error
Dongle is renewed for 2 years
[08:03:41] Glad to here...
[08:02:42] fault.bin
not found broo plz help me
[08:01:12] I will send here correct pac file after go to my work shop
[07:55:02] Wrong pac file
[07:53:47] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[07:53:47] Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : A661W-V390AE-11.0-OP-V008-20220216_1803_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
[07:53:25] Used pack file as fdl
[07:49:03] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[07:49:03] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
>>> ERROR : Protocol HandShake failed!
>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Format FS / Reset Settings [ v2.14 ]
Mode :
[07:43:58] What is the error?
[07:39:33] It don ??
[07:21:25] ITEL A58 (A661W V022) FAIL TOO...
[07:11:35] ..
[06:46:41] Alright
[06:31:09] Any system apps remover that works for android 12
[06:30:06] Serial??
[06:28:38] This is support cm2? Without any activation
[04:11:48] Make this https://infinity-box.com/?r=100155
[04:11:48] How to fix
Diagnostic code: 62
=== DongleManager [Infinity] v1.92 [2/26/2023 1:40:35 PM] ===
Searching...
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 000018C818164082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): 3A4418C8
Firmware version: 0150.02
=== Started: 2/26/2023 1:40:36 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
[03:23:14] Oppo a57 4g
[03:22:37] help me
[03:22:18] This is Qualcomm CPU, CM2 can\'t unlock the network lock..
[03:19:33] Engineer Dayo, use high version of the firmware to flash it again..
Most SPD phone don\'t die but faint
[03:18:40] Have told him several times that the phone don\'t use TESPOINT but they don\'t believe
Flashing it using pac file
[02:50:55] EasyBuy?
[00:08:27] If you will find it please drop image here for all users
InfinityBoxTalks 2023-02-26
[23:14:03] Google
[22:47:09] Please test point for infinix hot 20i x665c
[20:33:57] MDM
[19:27:38] Backup exist: C:\\InfinityBox\\CM2MT2\\backup\\MT6765__2C311BE598D7B61D3086230EAFB1EC13
[1] Process: RESET PROTECTION...
Format Ok: RESET PROTECTION
[2] Verified
[1] Verified
[2] Verified
Done: 00:00:36
Reconnect Power/Cable now
[19:27:37] Backup [20] to C:\\InfinityBox\\CM2MT2\\backup\\MT6765__2C311BE598D7B61D3086230EAFB1EC13\\
[31] Read: NVRAM
[13] Read: NVDATA
[21] Read: PROINFO
[32] Read: LK
[12] Read: NVCFG
[16] Read: PROTECT1
[1] Read: PGPT
[19] Read: PERSIST
[0] Read: PRELOADER
Done 9 files
Compress: C:\\InfinityBox\\CM2MT2\\backup\\MT6765__2C311BE598D7B61D3086230EAFB1EC13\\
Cleanup...
Ok
Verify C:\\InfinityBox\\CM2MT2\\backup\\MT6765__2C311BE598D7B61D3086230EAFB1EC13.7z
Verified
STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
S
[19:27:37] Redmi 9A FRP Done Successfully
S/N: 5D460AE2 v0154
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.42
Backup files: C:\\InfinityBox\\CM2MT2\\backup\\
Backup files: 62 dirs: 0
Build device list...
Init environment...
Load IDBase v124493 Ok
Check for updates...
You have latest version [2.42] installed
Telegram Channel: @InfinityBox
Telegram Group: @InfinityBoxTalks
Account: https://infinity-box.com/service/
Update configuration...
Configuration [12170] updated
Load IDBase v124493 Ok
Opera
[19:26:11] Brother this no need taste point but used pack file as fdl correct will working for you
[19:23:50] What was problem before flash??
[19:16:50] Here is the motherboard, where is the test point please
[19:13:26] Flash higher build firmware
[19:11:06] The phone is SPD
[18:36:52] About ?
[18:36:29] ??
[18:32:00] INFINIX X6511B REFUSE TO POWER ON AFTER FLASH FORMAT
[18:13:47] g715u verizon unlock
[18:11:39] it costs way too much
[16:28:00] How to solve
[16:26:24] I have a problem
[16:26:18] Hallo
[16:18:16] how to reset frp redmi note9t by cm2mtk?
[16:15:59] How
[16:09:48] Used dongle manger to fixed if you don\'t have shering tool in you PC
[16:08:20] Infinity moderator/ admin 001EE57BF2 dongle misconfig. I only installed driver pack and updated bluetooth driver
[16:08:11] Download signed frimwer flash and root then uninstall APK
[16:00:55] Not free bro
[15:48:01] I need tecno kg5j mdm file
[14:43:45] help me
[13:52:43] Anyone have jazz MF937 unlock file?
[13:34:41] Thanks
[13:34:38] I have fixed Uninstaller the debugger software and update dongle
[13:33:17] Help me with spark7 BOM erry
[13:05:58] i know This method but Same Issue
[13:05:41] Yes Already Do This
[13:05:22] You can use dongle manager to get the username and password
[13:00:29] Already write correct Input , But Same Issue
[12:45:53] write correct username and password
[12:30:37] How To Solved?
[12:30:03] Flash it wit pac file
[12:21:21] still baseband unknown
[12:21:04] LA: Starting Auth
SLA: Continue Auth
SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2112
[0656ff20] C:\\InfinityBox\\CM2MT2\\boot\\0_base\\base_v2112\\MTK_AllInOne_DA.bin
[a12cc454] C:\\Users\\Ahmadi MTC\\Desktop\\[Hovatek] Infinix Zero X (X6810-H858AB-R-GL-220416V577)\\preloader_x6810_h858.bin
Looking for suitable BootChain in DA...
Found MT6785
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Transfer control to DA...
DA: AGENT started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialize
[11:18:42] السلام...عليكم..عندي ..مشكلة في الشريحة...ضاعت...القارىء لا يتعرف عليها..و فيها تفعبل سنتين...هل من حل..
[11:01:16] Not available in this module this moment.
[10:54:48] Let me give it a try Boss
[10:54:14] Bl unlock and memory tool in SPD module needed
[10:52:01] You connect in brom mode ?
[10:50:10] same cm2 mtk
[10:46:49] Is not connecting only charging
[10:45:37] Cm2mt2 smart reset
[10:44:39] Found 15 files Tecno BE6
1. tecno_sa6s_vp510s_MT6580_F6D8CAD0ABE6D6C84ADC4C6571FDE931
2. tecno_ch9_MT6781_BE631BC30F2ECD97604726756D0530DD
3. tecno_bd3_MT6580_30CD43BE653A417FB4D30354481028A8
4. tecno_in6_MT6763_65BE6CA08B390FB57741F
[10:44:21] Hello fans pls is there any ways to bypass Nokia 3.4 frp? Version 12
[10:39:19] What loaders have you tested?
btw, if you expect long discussion abothe the problem I suggest yu to use support forum
[10:38:17] you can not trust for 100% even to yourself
[10:36:53] It looks like your dongle support period is expired.
Send your dongle S/N to any seller and oder [CM2] support renew for 1 or 2 years
Sellers - https://infinity-box.com/buy/
How to check support date - https://infinity-box.com/doc/?r=17
[10:35:38] https://infinity-box.com/news/?r=4289
[10:35:31] Do it https://infinity-box.com/news/?r=4289
[10:34:50] select another base (see sw top left)
[10:33:25] if software freez it means your PC Firewall or Antivirus block network.
give network access to BEST!
[10:32:36] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[10:32:14] make bb fix
[10:27:58] after repair imei baseband unknown
[10:27:39] Operation: Repair Security [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
[Vol+ | Vol-]Waiting for device connection...
PTFN: MediaTek USB Port (COM6)
MODE: BOOTROM; PORT: 6
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP: MT6785 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0813
CODE: Krug
TYPE: MODERN [RAPHAEL]
MEID: 34123D6B2B3058E50494B2C4
[10:27:30] META mode works ony for phones that can power-on well
is your phone well working?
[10:26:43] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[10:26:04] What function do you need friend?
[10:25:37] you have sharing tools installed or something like that.
Make this https://infinity-box.com/?r=100103
[10:24:06] What is the dogle S/N?
[10:23:26] click here https://infinity-box.com/?r=100155
you will see pictures
make as per given pictures
do you understand my idea now?
[10:22:27] Have you tried to connect it?
send sw log text
[10:21:53] I understand nothing.
What is it?
[10:17:08] BE6 file help
[10:12:45] Why is it doing that
[10:07:07] Please i need factory firmware for this itel S18
[09:44:32] she is my wife send wrong mesage then banned please
[08:49:07] Redmi 9c imei repair failed solution need by cm2
[08:46:40] add ta-1433
[08:44:37] For easy buy
[08:44:18] It have some tricks for flashing using cm2 dongle
[08:42:59] I have the solution, just download the firmware then I will guard you through.
[08:28:53] have to ask for help on forum?
[08:27:48] Device doesn’t turn on or what ?
[08:26:58] You facing any issue while flashing if
[08:26:30] software also removed but can not run cm2 software
[08:26:16] fault.bin uploaded/deleted
[08:26:07] I did it was some debug software found issue
[08:25:17] Make this https://infinity-box.com/?r=100155
[08:25:17] smart card misconfiguration contact support
[08:14:14] This is infinity Best bro not Infinity CM2
[08:13:20] Type: Infinity [BEST]
S/N: 270B8A5A
Username: 03270B8A5A
Account Status: Active
Hardware Status: Ok
#3: Infinity [BEST]; Firmware Version: 0123; Expired: 01-Jul-2020
[07:52:09] Found 32 files Ca6, search limit is 20 files per server
1. nokia_RM_1018_01068.00023.14295.43001_059W579_04496D5C_CustomerNvi_01068.00023.14295.43001_1008_4345259233a2a198f5f4d9f6b8ca6bf0.nvi
2. nokia_RM_1018_01068.00016.14295.38003_059W8X5_0CA61F5E_RM1018_059W8X5_01068.00016.14295.38003_007.vpl
3. no
[07:34:55] If you have magic cable use it so it will boot direct to dfu mode so you will flash it again or unscrew it and remove and plug it back and boot it back to dfu mode
[07:27:42] hello i have iphone 11 i harm it when i tryed to install an ios but the installation faild and now even itunes didnt detect what i have to do
[07:21:18] Found 5 files MT6580_alps_gxq6580_weg_l_5.1
1. recent_10_MT6580_alps_gxq6580_weg_l_gxq6580_weg_l_5.1_ALPS.L1.MP6.V2_GXQ6580.WEG.L_P54
2. noname_copy_MT6580_alps_gxq6580_weg_l_gxq6580_weg_l_5.1_ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
3. noname_copy_MTK_MT6580_alps_gxq6580_weg_l_gxq6580_weg_l_5.1_ALPS.L1.MP6.V
[06:38:37] Yes i can
[06:18:01] Delete old version and install new version or change the folder
[06:15:12] Y9 Prime 2019 STK-L21
Change imei? ok or No?
[05:57:54] Anyone that can guide me
[05:57:42] I want to flash itel s18 easybuy with cm2
[03:40:59] spd tool plz update this tool old
[02:21:23] ✅SAMSUNG WW FRP ON 🟢
✅DELIVERY:INSTANT
✅PRICE : CHEEP
⤵️…. …. …. …. .…
✅CONTACT WITH US
✅TELEGRAM: @ UNLOCKEASY
✅WHATSAPP:+8801713323205
🌐WEB:WWW.UNLOCKEASY.US
[01:09:47] https://easy-firmware.com/index.php?a=downloads&b=file&id=410946
Any one has link can upload please
[01:09:35] No need but test point
[01:08:08] Any one with other link scarter binary can upload https://easy-firmware.com/index.php?a=downloads&b=file&id=410946
[01:07:20] Sm-A326U u8 after flash cm2 file dead
InfinityBoxTalks 2023-02-25
[22:17:22] Please add itel S18 fdl boot
[20:53:42] Select correct DA
[20:23:32] Use meta mode on cm2mt2
[20:22:39] Plz give EMI file
[20:19:15] Every time I try to register the dongle, the program freezes on the same interface
Although the antivirus was closed and the computer changed, as I tried via a different email, all attempts to obtain the activation license failed.
Serial No (S/N): 270B8A5A
e-mail kaderentaa@gmail.com
please send m activation license
[20:15:40] Which phone
[20:15:00] I used test pin
[20:12:57] Its brom issue
[20:12:53] Every time I try to register the dongle, the program freezes on the same interface
Although the antivirus was closed and the computer changed, as I tried via a different email, all attempts to obtain the activation license failed.
Serial No (S/N): 270B8A5A
e-mail kaderentaa@gmail.com
please send m activation license
[20:12:47] Use test point
[20:08:56] plz hello
[20:08:34] Operation: Identify Device [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BROM ONLY
[+] Read Deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[+] Local SLA
[-] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
[Vol+ | Vol-]Waiting for device connection...
PTFN: MediaTek USB Port (COM48)
MODE: BOOTROM; PORT: 48
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
C
[20:07:01] Okay 👌 so what are you now saying that is ISP work
[19:56:40] Did you try in flash mode or ADB mode?
[19:45:23] Cm2 can\'t do job with that. I tried too but no success t606spd not there or higher version
[19:19:29] ☁️ CLOUD FAST ⚡️ ON
📱🔧 OPPO SERVICE 💯 ON
📱🔧 REALME SERVICE 💯 ON
📱🔧 MOTO SERVICE 💯 ON
📱🔧 NOKIA HMD 💥 ON
📱🔧 One Plus SERVICE 💯 ON
📱🔧 SAMSUNG SERVICE 💯 ON
📱🔧 HUAWEI SERVICE 💯 ON
Link in Bio
[19:18:48] https://t.me/+rHVlDWlszq9kNjk1
[18:58:39] No lucky.
[18:57:23] Yes it is
[18:57:10] Why not try Cm2mt2 sp unlock function any luck ?
[18:56:27] Sorry its Redmi 9A chipset
Mediatek MT6762G Helio G25 (12 nm)
[18:54:04] Okie asanti I will try
[18:53:35] Use tp
[18:53:19] Samsung a10s
[18:51:59] Your sn?
[18:51:46] Chipset ?
[18:51:36] Chipset ?
[18:51:22] Sure
[18:51:06] Sure, run Cm2mt2, service/security tab and repair sec
[18:50:25] Sorry if I may ask, what was your “PERMANENT” statement was like ?
[18:50:03] Can someone help imei change kg5j using cm2
[18:49:20] Model ?
[18:48:58] 💎
[18:47:03] who 🤷♂️
[18:39:28] Most of this mother fucker are scammer
[18:35:19] 🤔
[18:15:37] Yeah
[17:57:13] Brother this is not market for selling frimwer please post here for free
[17:57:07] Found 39 files cc7, search limit is 20 files per server
1. nokia_RM_1019_01068.00023.14295.43001_059W451_1A8CC78E_RM1019_059W451_01068.00023.14295.43001_013.vpl
2. nokia_RM_1012_20.10.11_059V643_390CC70B_RM_1012_CUSTPACK_ROM_EH_EURO_LV_eMP_20.10.11_002
3. nokia_RM_1012_20.10.11_059V8N9_390CC70B_RM_101
[17:55:09] Expired dongle
[17:54:46] You need yearly activation brother
[17:52:27] What is the solution i have downloaded and updated dongle many times
[17:51:12] Help me to unlock 🔓 redmi 9a network unlock please
[17:51:07] Redmi 9T network unlock..... How do i unlock? HELP...
[17:42:39] can i 100% trust the dongle sellers in the list of the website
[17:28:02] I used bootpack always or PAC for all my SPD both version 12 or 11
And remove the security plug-in permanently
[17:27:07] I have many times
[17:26:39] Never encountered it
[17:25:38] If not u will be getting USB not recognized error
[17:24:59] There are some spd that needs test point
[17:19:00] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[17:19:00] Operation: Identify Device [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BOTH [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] Auto-EMI
[-] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[-] Local SLA
[+] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM_V1633 (Android) (COM7)
MODE: PRELOADER PORT; PORT: 7
Waiting BOOT ack...
PRELOA
[17:13:11] Admin all loader tested but the phone can\'t flash yet not wipe
[16:39:29] NOKIA MODEL
[16:38:57] Which is?
[16:36:01] @libimobile
[16:35:09] cm2 2years reanu price
[16:35:03] other need
[16:33:31] SPD don\'t need TESPOINT
[16:30:52] Pardon me
[16:30:19] Resend
[16:30:05] What CPU?
[16:09:45] unlock cph2387
[16:06:16] Help me
[16:06:07] A035m frp
[16:04:17] ❤️ pleasure
[16:00:29] ✅ Done.
Thanks @libimobile for activation of my cm2 for 2yrs
[15:57:56] Nokia G21 possible to factory reset? T606spd
[15:17:27] Infinix X6511B test point please
[14:57:15] Lenovo k13 carrier lock any one help spd cpu
[14:04:07] Please help me with tecno file LE6-H6222E-R-TR-221212V758
[14:03:12] Hi
[13:34:17] hi
[12:34:57] https://infinity-box.com/?r=19&dir=/software
[12:09:28] Help
[12:09:27] It\'s urgent please
[12:08:32] Can u send me Cm2 latest version direct download link?
[11:32:20] Htc D626h flash mt2?
[11:24:23] Yes available, model ?
[11:23:28] Can you please switch this conversation to private
[11:21:38] Logs or pictorial error
[11:21:14] Don’t work on assumptions,kindly provide a log here
[11:20:45] Google might help
[11:19:41] Else repairs sec with Cm2mt2
[10:56:19] That\'s how it works with that high version security
Even if you flash with TESPOINT, it won\'t still be removed permanently...
[10:52:58] Ok
[10:52:49] Am not the one but Borni engineer
[10:52:25] Model number
[10:21:46] Found 12 files ch9
1. tecno_CH9n_H811BC_R_OP_211112V617
2. tecno_CH9n_H811B_R_TR_211012V568
3. tecno_CH9_H811A_R_GL_211112V699
4. hb_ch9_gionee6582_wt_l_MT6582_C88934E78571CF09DB54EB4174C94D10
5.
[10:11:37] I am in lag and I can do it for you
[09:57:11] Hardware
[09:48:13] How can I put this?
[09:45:54] Repeat operation with nv update and force nv update checked
[09:36:08] I need version 12 solution
[09:28:22] Dm
[09:27:52] Okay I dmed you
[09:03:34] How to remove mdm in infinix x6511b
[08:55:47] Try with another loader. Select loader from list. find something for similar model
[08:33:43] You don\'t expect to reveal it in public... It never done ✅
[08:25:48] How please
[08:24:41] But why and how can I remove it
[08:24:00] Bro, Palmpay is associated with SECURITY PLUGIN APP that will be automatically install on your phone
Without flashing and unlocking process, you can\'t delete it or uninstall it...
Loan or EasyBuy locked features
[08:22:22] This is what they detect on phone
[08:22:02] Palmpay
[08:21:53] Name of the App
[08:21:44] How
[08:21:22] CM2MT2
[08:20:23] I want you to tell me what software can I use to erase everything and also change every information such as location, IMEI, device id and also network information of the phone,
There is one apk that always detect my phone even after flashing🥲
[08:19:56] It\'s not easy buy bro
[08:18:10] Bro your phone is on EASYBUY SECURITY PLUGIN LOCKED nothing like SN or whatever
All you have to do is Flash it but only flashing it can\'t remove it.. to remove it permanently is a trick and can\'t be discuss outside
It pay service
[08:16:31] I want to bypass palmpay and do self referrals in one phone
[08:15:03] Why do you wanna change the SN?
You can\'t do that unless IMEI
[08:14:11] Wx3
[08:14:07] Techno version 7
[08:12:13] Which brand are you referring to?
Samsung?
[08:11:44] EASYBUY SECURITY PLUGIN SUCCESSFULLY REMOVED PERMANENTLY. BOTH ANDROID 11 AND 12 VERSION SOLUTION AVAILABLE
[08:09:43] And Device ID
[08:09:38] What of SN?
[08:09:15] IMEI only
[08:09:02] Ohh am in Lagos State unfortunately
[08:08:28] It\'s possible to change my SN number using CM2?
[08:08:11] Borno
[08:08:02] Where is your location?
[08:07:48] I can remove it permanently
[08:06:42] I need
[08:06:04] It won\'t work this way even if you choose FDL file
[08:03:07] EasyBuy
I can remove it permanently from your phone at affordable rate
[07:52:52] Admin what is the solution to this can\'t flash can\'t rest
[07:52:04] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
VER : BP_R2.0.1
LEN : 10B7364C1 ( 4.18 GiB )
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V78-20221102
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : X6511B-F631
[07:35:41] Cut off that metallic plate carefully
[07:25:50] why when i try unlock vivo y15 cm2 mt2 setup stock
[07:14:59] Thanks
[07:00:19] Hie... Having trouble with tecno le6 testpoint... When l try to use testpoint seems it\'s not working, still stuck at brom
[06:47:50] not supported currently
[06:36:03] Please I need oppo a92 cph2059
Format tool or flash tool
[06:07:51] htc d626h frp?
[04:45:41] How to erase rbmp on spd chip?
[04:35:08] With spd or mtk
[04:14:41] Please team cm2 add all nokia spd and Samsung spd
InfinityBoxTalks 2023-02-24
[23:17:23] Only isp
[22:11:08] The restore nv via unlocktool nv section
[22:10:06] It cant
[22:09:39] Without rooting and can work on spd chipset android 12?
[20:55:08] Use mauimeta in meta mode
[20:54:00] Pls what do i do ?
[20:46:28] Can someone help me with imei write with cm2 kg5j spark 8c
[20:45:30] Yes
[20:40:08] Is it empty
[20:38:06] Pls imei problem on x665b help
[20:31:49] Itel S663l rebooting after format flash, any solution
[18:42:56] Brother select correct cup and model if not working for you posted here to help
[18:19:07] Found 40 files s18, search limit is 20 files per server
1. Spice_M5460_S18_20120227
2. Spice_M6112_6531CA_12B_GC790_XLL_A10_128X64_272X480_M1_V18_chandanps18
3. Haier_MT6572_alps_CB514_Android_4.2.2_G307_ZX_D1_S18_HAIER_MEXICO_S20140528_Z23
4.
[18:18:27] Found 40 files s18, search limit is 20 files per server
1. Spice_M5460_S18_20120227
2. Spice_M6112_6531CA_12B_GC790_XLL_A10_128X64_272X480_M1_V18_chandanps18
3. Haier_MT6572_alps_CB514_Android_4.2.2_G307_ZX_D1_S18_HAIER_MEXICO_S20140528_Z23
4.
[18:13:18] Assalamu alaikum
I need itel S18 fdl file please help me
[18:10:26] Few days back I accidently formatted all the partitions on my ws3 devices, I managed to flash stock ROM then everything working fine except IMEI and network signal. I get null IMEI and no mobile network on phone. I tried MTK engineering mode but doesn\'t work please what\'s the chip of ws3
[18:08:28] X665c test point anyone pls?
[18:04:30] Enter username and password
[18:02:26] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[18:02:26] Load IDBase v8331 Ok!
VER : BP_R1.0.0
LEN : 0017A02D ( 1,48 MiB )
CPU : kamal_singla
VER : A032F_bit2_wipe+frp_by_kamal
VER : BP_R1.0.0
LEN : 00206294 ( 2,02 MiB )
CPU : kamal_singla
VER : A035F_bit2_wipe+frp_by_kamal
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion
[17:32:25] Is spd now
[17:28:31] Send motherboard photo
[17:25:56] Make this https://infinity-box.com/?r=100155
[17:25:56] Dongle misconfiguration
[17:23:34] help
[17:21:21] Welcome
[16:56:02] Sure ✅
[16:55:46] Have you use tp ?
[16:46:44] No I have no idea about that.
[16:36:45] Can you help me please
[16:34:05] Working perfectly now, thanks
[16:23:52] Ok
[16:15:10] I want remove easybuy
[16:14:21] What’s up?
[16:13:48] I want remove easybuy
[16:13:01] What do you want to do?
[16:01:37] I never share my cm2 before sir. I will try dongle manager as you said
[16:01:20] Infinix X6511B test point is required, help a brother please 🙏
[16:00:20] Then use dangle manager to fixed
[15:59:49] I don\'t share my cm2
[15:59:34] I never share to anyone
[15:59:24] Do you have one please
[15:59:20] When you tall not to share you cm2
[15:58:02] Help please.
[15:57:04] Solution please
[15:56:02] Infinix x6511b test point needed
[15:02:42] I see, I have a problem on cm2, it does not boot the phone, so it is sane, so where is the solution?
[14:58:15] Found 5 files infinix x665b
1. infinix_x665b_test_point.jpg
2. infinix_x665b_032ecf95.preloader_x665b_h6222
3. infinix_X665B_11_X665B_H6222IJKL_R_OP_220330V285_RP1A.200720.011_x665b_h6222
4. infinix_x665b_MT6761_2410179C7B9A04AA63373
[14:58:00] Nothing found for infix x665b
If you will get the file upload it to support with iosFileUploader
[14:19:24] How can i unlock network for tecno spark 7 pro
[14:18:15] Used extanl preloader and tp brother
[14:15:35] X665c pls which CPU will I use
[14:05:48] (Kf8)
[14:03:43] can cm2 unlock tecno spark 7 pro (model of8)?
[13:49:51] Please help me tecno spark 8 KG5J frp problem
[13:49:34] Please help me tecno spark 8 KG5J frp problem
[13:40:42] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[13:40:42] Inbox
[13:39:17] I need to network unlock ZTE Blade A5 2020
[13:38:10] 200 sir
[13:37:59] How many credits
[13:37:38] Yes
[13:37:34] Can I also make payment for credit to this Trc20 address
[13:33:56] Infinix x665c can\'t infor with cm2
[13:24:17] What is the problem remains like this
[13:22:09] Infinix x665c pls which CPU will I use
[13:11:57] Please how do I repair imei on opportunity A15s
[12:29:34] Please how I\'m i use preloader
[12:12:43] Please how do I repair baseband on CG6?
[12:07:27] Used preloader and tp
[12:04:34] Nokia C10 frp help
[12:01:15] Okay thanks
[12:00:54] okya thaks
[11:59:55] Use test point
[11:59:10] Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : X6511B-F6318-11.0-OP-V022-20210926_1606_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
[11:57:24] Please how do I repair baseband on CG6?
[11:57:19] Any help please
[11:53:15] It will work 100%
[11:52:59] Ok sir
[11:52:10] Install libusb drivers for kg5j
[11:52:08] Please how can i
[11:51:36] It\'s BF7 test point please
[11:51:34] Use preloader
[11:51:09] Please how do I repair baseband on CG6?
[11:50:34] Good day
[11:48:43] Please help me tecno spark 8 KG5J frp problem
[11:26:31] BE7 testpoint please 🙏
[11:05:25] Nem-l51
[10:55:53] it need to be flashed after isp or chipout all latest security hang on logo after isp or chipout
[10:51:42] No problem
[10:51:30] Can I dm?
[10:51:03] Its v 425 not 431
[10:50:49] This one can work via test point
[10:50:26] Via isp
[10:48:54] Tecno KG5J SPARK 8C latest security test point does not work any solution please
[10:46:01] What the phone chipset
[10:45:28] I want you to tell me what software can I use to erase everything and also change every information such as location, IMEI, device id and also network information of the phone,
There is one apk that always detect my phone even after flashing🥲
[10:45:24] Ok
[10:42:18] Let me test
[10:39:21] yes available @libimobile
[10:38:27] Yes you can, if brom or tp not disabled
[10:36:02] If it can pick via test point
[10:35:15] Use preloder
[10:33:58] Hello guys A042F kg unlock is it possible with cm 2
[10:33:02] Download backup file for your device http://dl1.infinity-box.com/00/?dir=nvram/
Unpack it
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[10:32:10] I try so many settings pls I need solution
[10:31:38] Ask @Abdulwasii_remote_tech_service he will help you out
[10:31:20] Infinix x688 showing emi
SettingS has been change
[10:23:09] Kindly check dm
[10:22:54] Yes you can
[10:19:24] How much is 200 credit?
[10:19:01] I want you to tell me what software can I use to erase everything and also change every information such as location, IMEI, device id and also network information of the phone,
There is one apk that always detect my phone even after flashing🥲
[10:18:18] I want you to tell me what software can I use to erase everything and also change every information such as location, IMEI, device id and also network information of the phone,
There is one apk that always detect my phone even after flashing🥲
[10:09:00] Thats excellent congrats beo
[10:07:16] Thats WDF violation been searching for a solution but try using the old cm2mt2 version
[10:01:40] spreadtrum ,I managed to fix with cm2 sp2
[10:00:22] What is this phone cpu type?
[09:59:09] Make this https://infinity-box.com/?r=100155
[09:58:54] Here is it https://infinity-box.com/support/
[09:58:38] use this tool to check where is the problem with your PC https://www.nirsoft.net/utils/blue_screen_view.html
also be sure you installed phone SoC drivers well https://infinity-box.com/?r=19&dir=/soc-drivers
[09:57:29] what was the problem before format?
sw log text?
[09:57:24] Octa-Core
[09:57:16] MediaTek MT6762
[09:56:56] you can renew by two ways with the same final result:
1. ask seller to renew
OR
2. buy credits from seller, Sign In to your account and order renew via your account
[09:55:54] https://forum.infinity-box.com/viewtopic.php?t=12623
[09:55:12] Ok
[09:54:32] Whats the phone chipset
[09:54:07] Have you tried with loaders for similar models?
Try and tell me result
[09:53:29] See
[09:53:04] I want you to tell me what software can I use to erase everything and also change every information such as location, IMEI, device id and also network information of the phone,
There is one apk that always detect my phone even after flashing🥲
[09:52:43] Use preloder bro
[09:52:20] Download here https://infinity-box.com/support/
[09:51:45] What is the seller name?
[09:51:25] it may be you should select another base/model DA.
Also Download backup file for your device https://infinity-box.com/?r=100215
Unpack it
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
And be noted that latest CM2MT2 version for today is 2.41 but not 2.36
[09:51:23] Yes it is really product that i need
But the seller is not responsible he said only wait
[09:50:01] What is the S/N?
What is the problem?
[09:48:15] first check is it really product that you need
And contact to seller and check with seller.
We have no orders for this S/N yet!
[09:46:41] Nokia c20 network unlocking error wrong firmware what\'s the solution?
[08:01:59] https://infinity-box.com/?r=19&dir=/software
[07:58:48] Help me with it
[07:58:17] Please help me the reseller is not submitting my order i was order one week ago but still now i am waiting
[07:54:47] Used latest mt2 and do the job
[06:43:21] Hi
[03:59:21] anyone using easy firmware please help me unlock and share download link
[03:58:34] https://easy-firmware.com/index.php?a=downloads&b=file&id=91396
[03:57:56] PRA-LA1C185B171
[03:57:48] please i need link to this easy firmware file
[03:57:09] hi guys
[02:14:30] Found 6 files itel A58
1. recent_10_itelA35COPYSC8830_android_1_A35_8.1_MRA58K_A35
2. Oukitel_MT6735M_OUKITEL_K6000_6.0_OUKITEL_K6000_V09_20171117_MRA58K_t875a_oq_t92_33pu_hd_128g16g_fdd_3m_5p_M
3. itel_S11_I801_6.0_V065_170907_MRA58K_S11
4.
[02:13:29] Found 49 files A58, search limit is 20 files per server
1. xiaomi_MT6797_Xiaomi_Redmi_Note_4_6.0_B6L_S100_20190123_MRA58K_nikel_CLEAN
2. xiaomi_MT6797_Xiaomi_Redmi_Note_4_6.0_B6L_S100_20180607_MRA58K_nikel
3. Symphony_MT6580_Symphony_i10_6.0_MRA58K_i10
4.
[02:12:23] Nothing found for A58 fdl
If you will get the file upload it to support with iosFileUploader
[00:48:59] Peace be upon you. Is there any help? I bought an old cm2 dongle, and for those who have an email I want to enter, I need to change it and put an email. I made a reset account, and it tells me off? Is there a helper or an admin who goes through ultraviewr to see a problem?
[00:05:07] Dm I will guide u
[00:02:56] https://www.instagram.com/reel/CoxooZ5jyjq/?igshid=MDJmNzVkMjY=
[00:02:36] what do I have to do
[00:01:24] Please what\'s the problem?
[00:01:06] Found 5 files Ka6
1. tecno_KA6_H8025FG_OGo_201201V219
2. tecno_ka6_MT6580_36DFE5EAD0DCB77167ECC7EA8F541B4F
3. tecno_ka6_MT6580_C710B9723FF2778208E447F308DB7B1D
4. tecno_ka6_h8025_MT6580_528325DBB0449A74A9B2DCE8A76876D3
5.
[00:01:05] Send me the latest version
InfinityBoxTalks 2023-02-23
[22:29:07] CM2
[22:14:56] Please send
[22:13:20] Cme
[22:12:12] Inbuilt loader
Download boot pack
[22:11:40] 1⃣buy on GSM server
[22:09:20] Please send me version of cm2mt that I can flash android version 8
[22:02:19] Hello cm2 solution I WANT FDL ite s663L
[21:59:01] Nothing found for honor x7
If you will get the file upload it to support with iosFileUploader
[21:47:25] Found 17 files nokia g10
1. nokia_g10_ta_1334_ta_1346_test_point.jpg
2. nokia_RM_724_08.60b_RM724_059G100_08.60b_032.vpl
3. nokia_RM_724_08.60b_RM724_059G100_08.60b_032_signature
4. nokia_RM_724_08.60b_RM724_059G101_08.60b_032.dcp
[21:47:08] Found 2 files nokia g21
1. nokia_g21_ta_1418_test_point.jpg
2. recent_NOKIAG21TESTPOINT
[21:09:50] Remove online frp reset (only network unlock can be online service)
[20:55:24] Format with what
[20:54:42] I can help
[20:52:53] Please my question is that,
android version 10 and 11 compared to android version 8, 7 and 6. Which one is more to erase everything? And easybuy removal?
[19:41:45] The phone has RPMB that\'s why we need this feature to be added on CM2SP2 in order to clear it.
[19:35:42] I have seen it with CM2MT2 v2.42
[19:31:11] Successfully but frp is here
[19:30:48] Yes sir
[19:26:00] Hope you have the fdl
[19:25:49] Welcome
[19:25:40] Ok thank
[19:24:46] Or try it with unlocktool it will work perfectly via test point
[19:24:10] And also use test point
[19:23:56] Use cm2sp2
[19:20:56] bypass it
[19:19:47] A032f frp solution please
U1 and u2
[18:56:08] Filter the drivers
[18:32:00] Pls guide me
[18:31:39] Evening
[17:54:06] Hello guys
[17:52:38] Dm
[17:50:29] A02 after successfully write rpmb stuck on bootlogo (Samsung). Any solution???
[17:49:32] Hi to you all
[17:15:15] Found 3 files kg5p
1. recent_MT6765_TECNO_TECNO_KG5p_12_KG5p_H6222MNOPQRSTUVW_S_GL_220923V574_SP1A.210812.016_kg5p_h6222
2. tecno_kg5p_MT6765_949D42730C30EEA2A89DB7C063C85D74
3. tecno_kg5p_MT6765_EA89F91BC7E488CA93D597A48A3300DA
[17:14:48] kg5p testpoint
[17:08:56] Solution pls
[17:00:21] My dongle is expired can buy credit n use it online service
[16:58:39] X6511B
[16:58:23] After format
[16:58:13] DEVICE NOT POWERING ON AGAIN
[16:48:12] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : P651W-F3116-10.0-OP-V032-20210816.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
[16:27:06] I need help please
[16:26:51] when I want to perform an operation With cm2mt2 my computer restarts like this
[16:23:14] Thanks Bro
[16:17:28] Who can assist me here with cm2 softwares I have bought anew dongle
[16:16:00] .
[16:14:36] X6511B FDL BOOT SOLUTION PLS
[15:08:45] And*
[15:08:40] Bro it must to be an BIN abd this not
[15:07:53] Then use same module to write back
[15:06:41] With infinity Cm2
[14:53:58] Ok what next?
[14:49:34] Must have full working internet and loader
[14:47:14] Pls hw do I remove security plug in from itel A661w ( I run bat failed).
[14:46:49] Pls who do I remove security plug in from itel A661w ( I run bat failed).
[14:23:16] Read with which module ?
[14:09:07] Techno RB8s unknown baseband solution kindly help
[14:07:13] Can anyone help me what the wrong with this firmware
[14:04:53] How to flash this rom? I read it with cm2 and cant load it again
[13:47:31] Thank you
[13:41:57] If brom not blocked, use techno and select Raphael v2
[13:20:52] Dm
[13:15:59] Please which boot can work for KG5J
[12:51:03] Your device model and android version ?
[12:49:34] Need this
[12:48:12] Select correct configuration bro
[12:47:32] Note that the password shown on dongle manager was default password, owner might have change password from infinity server so use the one user changed to not default password
[12:45:46] 👆
[12:45:41] Your support is expired bro, needs to renew
[12:42:07] Hi I have a problem with my mtk2 when I perform an operation my pc restarts
[12:35:31] how fdl cheng
[12:13:07] Itel p661w
[12:10:16] Help me with this run bat file
[12:08:38] Any solution to this?
[12:08:21] How to choose the real fdl
[11:40:31] hi developer My cm2 User name Pasword solve the problem plz its request for you help me brother🙏
[11:39:25] Is it in drivers
[11:33:11] Cost
[11:32:46] I am connected to the internet
[11:30:40] If you have 2 PCs please try with another Pc and see the result
[11:30:14] 1yr and 2yrs activation available
[11:29:46] Its what I thought was hindering you to accomplish your work
[11:28:55] Do you just copy and paste, if so consider space after pasting. Sometimes after pasting the pc automatically leaves a space yet its not included in the user name and password
[11:26:59] Am also connected
[11:26:51] i amtry but same error wrong username and pasword showing
[11:26:39] Yes it is
[11:25:53] Run dongle manager and click on get username and password
[11:25:28] Please verify your username and password via dongle manager
[11:24:03] how to solve plz help me????
[11:23:43] Remember you have to stay connected to internet while working
[11:23:21] How about the computer date, is it ok
[11:22:41] I did the renew sub not up to 4 month ago
[11:22:16] According to the log
[11:22:02] It ok and I have reset the password this morning and I try login it on cm2 MTK2 work fine
[11:21:57] It expired yesterday
[11:20:50] I also see that your support is expired so it means you have to pay for a renewal
[11:19:59] If its all ok
[11:19:51] Something is wrong with your user name or password
[11:19:51] Help please ivan
[11:19:40] Thank you
[11:19:23] Am not the admin but I want to help
[11:17:29] Hello admin
[11:14:31] Admin please am having issue with my cm2 I try reset the password but still help me out
[11:08:17] Telegram not allowing inbox message, kindly inbox
[11:05:50] Need InfinityBox BEST2 license_best dat file please help 00251057CB
[11:05:45] Hello boss
[11:03:45] Need InfinityBox BEST2 license_best dat file please help
[11:03:10] Update your dongle
[11:02:35] I need your help
[11:02:35] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[11:02:35] Inbox
[11:00:46] InfinityBox BEST2 data dosyası lazım
[11:00:27] Please help me
[11:00:08] https://support.halabtech.com/index.php?a=downloads&b=file&id=618821
[10:59:23] 00251057CB
[10:54:45] Kindly send an high quality up and down PCB pics
[10:53:28] Infinity cm2 dongle manager latest I need please
[10:48:44] Ci7n
[10:46:06] Nokia 1206 nvram needed
[10:45:19] I need license_best_xxxxxxxx.data file
[10:43:29] I can\'t use InfinityBox BEST2
[10:41:16] 00251057CB
[10:40:16] Pls my cm2 dongle is corrupting when I installed it why
[10:39:42] Do you need the box number?
[10:39:22] if you send my e-mail behrem65@hotmail.com
[10:38:46] Can I request the license_best data file?
[10:37:30] I can\'t use InfinityBox BEST2 can you help me
[10:36:07] hi
[10:35:38] slm
[10:30:22] and preloader y15
[10:28:57] Done with test piount
[10:28:46] Backup [20] to C:\\InfinityBox\\CM2MT2\\backup\\MT6765__D05F3DA6D5E0E5CC36D2671109A57D39\\
[29] Read: NVRAM
[8] Read: NVDATA
[19] Read: PROINFO
[30] Read: LK
[7] Read: NVCFG
[14] Read: PROTECT1
[1] Read: PGPT
[17] Read: PERSIST
[0] Read: PRELOADER
Done 9 files
Compress: C:\\InfinityBox\\CM2MT2\\backup\\MT6765__D05F3DA6D5E0E5CC36D2671109A57D39\\
Cleanup...
Ok
Verify C:\\InfinityBox\\CM2MT2\\backup\\MT6765__D05F3DA6D5E0E5CC36D2671109A57D39.7z
Verified
Process: RESET PROTECTION...
Format Ok: RESET PROTECTION
Process: USERD
[10:28:46] Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: SMART RESET
Wait...
WARNING!
Format FS WILL RESET ALL USER DATA!
Make sure about correct format mode selection!
Continue?
Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port_V1632 (COM35)
MODE: BOOTROM; PORT: 35
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM: Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x00
[10:26:26] Nokia 1206 nvram needed please
[10:25:50] where you able to get the bf7 test point am in need of it
[10:21:37] vivo y15 latest version pin lock solution
[09:57:31] Help me guys for unlock network TA 1380
[09:40:56] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[09:40:56] Inbox
[09:34:47] https://youtu.be/O3memldPfdk
[09:29:47] Help me the house is it possible to unlock network Nokia C21 Model:TA-1352 using Cm2?
[09:27:47] Ye, we can sir
[09:27:04] Yes we can, but USDT payment only
[09:05:11] Not siren
[08:59:41] Is a downgrade possible to u2?
[08:58:57] Aaah fudge
[08:57:21] Isp solution
[08:34:38] Samsung a02 kg unlock, test point doesn\'t seem to be working
[08:29:07] I have a feather phone mtk
[08:28:50] Where can I download contact extractor software
[08:28:12] No. this is a separate product and there is another author
[08:25:22] Is data explorer is part of it ..
[08:24:18] I have a contact extractor dongle I can\'t find exe for it...
[08:19:04] https://infinity-box.com/buy/
[08:04:33] Run Dongle manager on an internet connected computer with the Cm2 dongle connected.
Under the tab with Serial Number, click in \"Get Username and Password. Copy the info and open again your cm2mt2 loader, under settings fill in the user name and password you obtained from the dongle manager
[08:03:19] I need cm2 credit any body in India or south Africa?
[08:00:01] How to flash nokia 108
[07:56:30] Lib usb filyer unistall
[07:55:40] Help here
[07:36:09] help sir
[07:32:10] Here
[07:25:00] help how to solve copmputer blue screen
[07:08:12] Found 8 files CI6
1. tecno_ci6_camon_19_test_point_2.jpg
2. tecno_ci6_camon_19_test_point_1.jpg
3. Acer_MT6735_acer_T02_acer_T02_5.1_ALPS.L1.MP3.V2.3_CCI6735.35U.L1_P70
4. noname_ci6_d52c1p_dx_d70_MT6572_501EBCFBCDD43F9517C93FD7A2F4E
[07:04:24] you need change fdl
[06:46:06] Samsung a32f u1 mdm outo relock help
[06:42:30] realme c21y unlock fail cm2 uat pro done tool fix plz boot 1.16 instal tool not open
[06:10:00] Flash
[06:02:31] What do you wanna do on the phone
[05:24:15] how to Set Platform -> FireFly
[05:05:54] Available @libimobile
[04:59:19] How to
[04:05:17] Buy it from your reseller or at infinity website
[04:02:54] Search Google
[02:43:20] How can i buy credit to my cm2?
[02:34:56] vivo y16 frp test point plz
InfinityBoxTalks 2023-02-22
[23:45:18] hi find Alcatel 8091 MT8167_TR__10_PPR1.180610.011_Aquaman_10_WIFI firmware please
[23:27:21] Tracfone server on, on for unlock, we need only imei
[22:09:40] I want to root my phone with CM2
[22:09:26] Yes sir
[22:07:54] Mtk drivers?
[22:07:12] ?
[22:05:56] I need cm2 driver
[21:40:12] Can’t available firmware
[21:18:23] I need full package
[21:17:08] Already done it but still the same error am getting
[21:12:36] Just Go to YouTube
[21:06:21] Hi
Plz i need a video of how to use best dongle completely...
[20:48:24] Hi sir plz I have Alcatel 9032z can plz unlock on infinity box
[20:20:52] Use the pac file as boot
[20:16:45] Don\'t that means no solution on this Infinix x6511b
[20:15:57] Will it still work???
[20:15:49] But it Qualcomm bro and I had the test point
[20:15:28] Ok thank you alot
[20:12:49] CM2SP2 HELPER
[20:11:35] Please I need help with format tool for Nokia 1.4 thank you
[19:35:18] I just missed the spelling: it\'s fongkong and the meaning of it it\'s original fake
[19:34:08] X665E test point?
[19:28:11] In short it\'s an iPhone that\'s using android firmware
[19:27:16] No I\'m not using and fokong iPhone it\'s iPhone that it\'s using spd or mtk chip
[19:19:46] My Vivo Mobile Y30 (1940) is stuck at home screen it move across but didn\'t open anything except from settings.
I don\'t want to lose data. it didn\'t show the wifi options. only data shows.
when I click on icon on homescreen it shows loading app please try again later... kindly tell what is the issue.
it open the debugging option. but didn\'t show data on pc.
kindly what to do Help me please
[19:16:44] what is a fokong iphone?is that you\'re using?
[19:16:16] Else you must challenge the server
[19:15:59] But only if it\'s spd and mtk
[19:14:41] Maybe you\'ve lost bra. IPhone? Really? Here\'s spd and mtk only, unless you have Chinese or fokong iPhone then we can help you with those 2
[19:07:56] can i get help with iphone 5s stuck on logo?
[18:56:48] My Vivo Mobile Y30 (1940) is stuck at home screen it move across but didn\'t open anything except from settings.
I don\'t want to lose data. it didn\'t show the wifi options. only data shows.
when I click on icon on homescreen it shows loading app please try again later... kindly tell what is the issue.
it open the debugging option. but didn\'t show data on pc.
kindly what to do Help me please
[18:40:25] I already extracted it not from archive
[18:23:51] 😂😂😂
[18:10:20] They\'re still busy with that. Just send failed logs to Support page or try something else
[18:08:26] Root
[18:07:26] Nokia TA 1380 second edition network unlock 🔓 always show wrong firmware
[18:04:47] Bro coding is not a child\'s play. More investment, more coders and time are needed to do that Job. You just forget about CM2QLM. Emmc isp or ufs, you should wait for Jesus comes back or else invest to other tool to do that Job. CM2 is best in Chinese Phones and supported CPU. They\'re best in SPD and MTK.
[17:50:50] Yes, the team can plan to make isp adopters to solve this. For example on SM-A035f
[17:50:44] Sir already mess sent plz seen
[17:49:14] stop spam and wait!
[17:48:58] Your dongle was damaged with sharing tool
How to fix https://infinity-box.com/?r=100203
[17:46:37] NOKIA C10 KG LOCK HELP
[17:46:26] Sir already mess sent plz seen
[17:46:11] Sir already mess sent plz seen
[17:45:51] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[17:45:23] it means you mst remove all useless drivers that are related to USB
you should configure your PC for work carefully!
[17:44:35] Make this https://infinity-box.com/?r=100103
[17:44:02] select another loader from the list at top
[17:43:39] Model?
[17:42:43] Ok thanks
[17:42:41] I am afraid it may be a problem
[17:42:03] mode?
phone problem?
[17:41:47] Sir already mess sent plz seen
[17:41:14] use default loaders.
in case of problem send sw log text
[17:40:56] emmc isp work with flash chip but not with CPU
[17:40:20] Your dongle was damaged with sharing tool
How to fix https://infinity-box.com/?r=100203
[17:39:50] send to help@infinity-box.com
[17:39:06] You should find firmware with language that you need
[17:26:55] 12 math activities
[17:26:12] mdraju5310@gmail.com old dongle mail sent ..... chake plz
New dongle mail: alamin86105@gmail.com sent chake pleases
[17:25:38] mdraju5310@gmail.com old dongle mail sent ..... chake plz
New dongle mail: alamin86105@gmail.com sent chake pleases
[17:24:44] Help
[17:23:43] For?
[17:23:22] Sir
[17:23:18] Help
[17:16:33] We need also emmc isp tool in both modules.
[17:02:19] sorry itel s18 fdl file please 🙏
[17:01:44] itel a18 fdl file please 🙏
[16:51:05] Infinix hot 20i x665c. Please I need the test point
[16:50:28] Lg X120EM imei repair. Help
[16:20:23] Try here @FlashFileSearchBot
[16:20:23] Pls and pls i need file of oppo 1941 file
[16:19:34] मेरी मदद करो भाई oppo 1941 की फाइल भेजो
[16:14:53] Hello
[15:46:01] Yes
[15:45:51] But 👆
[15:45:39] Ok
[15:38:01] I can fix for you remotely
[15:33:59] Hello
[15:32:56] I will pay
[15:32:54] Hello who will guide me on how to root phone with cm2
[15:22:03] Please tecno kh6
Which cpu or base should I select for frp
[15:21:35] Hello
[15:19:34] There is one specific apk
[15:12:49] When ever I want to unloked boot it shows this please help
[15:09:35] Just goto Google and search for security plug-in APK I think that\'s the name
[15:00:02] No sir don try because one day you will damage you card
[14:51:14] Help me please
[14:48:16] Please I have flash my phone and root, can someone send me apk to remove security plugin?
[14:31:12] Is it possible to do remote jobs without damaging tool? ( Not sharing the dongle)
[14:24:27] Pls Tecno le6 test point
[14:16:52] Kg5j test point please anyone
[14:15:56] any one i need nv data file for redmi 9 MUI 12.5.1
[14:12:53] mdraju5310@gmail.com old dongle mail sent ..... chake plz
New dongle mail: alamin86105@gmail.com sent chake pleases
[13:58:21] Not found on the list
[13:49:15] How do you deal with this type of phone
[13:43:14] X665c tp
[13:37:18] Dm I\'m having
[13:32:23] Solution please 🥺
[13:22:55] not working
[13:22:33] Use spd helper tool to reset
[13:07:41] Please help with KH7 TEST POINT
[13:05:10] cm2 spd not open
[12:50:18] Full logs ?
[12:44:02] This problem needs a solution because even deleting all the drives and putting a new one is still happening. Even if you restart Windows, the problem persists, especially on infinity cm2 and hydra
[12:42:00] Help pls
What can I do here please
[12:32:46] mdraju5310@gmail.com old dongle mail sent ..... chake plz
New dongle mail: alamin86105@gmail.com sent chake ple
[12:25:08] Help pls
What can I do here please
[12:22:32] Sir new mail sent
[12:19:06] Helps
[11:58:29] Mtk mt6261 language add
[11:48:47] Alrighty thanks
[11:47:23] Ohh okay thanks boss
[11:42:38] X657
MDM needed
[11:42:29] Your dongle was damaged with sharing tool
How to fix https://infinity-box.com/?r=100203
[11:42:13] I have not shared with anyone
[11:42:12] Do you have good quality PCB photo?
[11:41:35] Make this https://infinity-box.com/?r=100155
[11:41:21] Infinix hot 20i x665c. Please I need the test point @admin
[11:41:15] all mails answered by supporters
you must check your mailbox SPAM folder
[11:41:03] Infinix hot 20i x665c. Please I need the test point @admin
[11:40:29] What is the problem friend?
[11:39:44] Your dongle was damaged with sharing tool
How to fix https://infinity-box.com/?r=100203
[11:38:27] Your dongle was damaged with sharing tool
How to fix https://infinity-box.com/?r=100203
[11:37:35] How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[11:37:17] What file do you mean exactly?
[11:36:44] Where to add and why?
[11:36:12] https://infinity-box.com/contact/
[11:35:03] please send me sw log text for that operations and mark the place where the delay is
[11:34:28] First connect phone to SW. After that sw will make available buttons enabled
[11:33:46] Hi,
Try to select another loaders (similar model), it may helps
[11:33:14] Iyr & 2yrs activation available @libimobile
[11:33:08] Meaning that you needs to renew 👌
[11:33:04] in some cases server connection need renewed licence
[11:32:34] What file do you need?
[11:32:32] After connecting to do
Tecno PR651E
it says license expired
[11:31:15] Then connect pc to net
[11:29:11] Option used to be unlock bl user data safe. Now I can only see unlock bl. Is it the same? I have sm-a013g can I unlock bl with user data safe?
[11:29:10] https://infinity-box.com/news/?r=4289
[11:28:47] Send your dongle S/N to any seller and oder [CM2] support renew for 1 or 2 years
Sellers - https://infinity-box.com/buy/
[11:28:15] It may be something with your PC after windows update
check https://www.google.com/search?q=0x0c000007b
[11:27:59] https://infinity-box.com/buy/
[11:27:45] all new dongles have 1 year included.
new dongle should be registered with your e-mail and then 1 year start
see here https://infinity-box.com/support/?s=6
[11:25:26] So hom much to renew
[11:25:14] Yeah that\'s the issue
[11:24:45] spd improvements are in progress
[11:24:15] server features may need renewed support
[11:23:50] Please configure your PC for safe work, Make this https://infinity-box.com/?r=100103
[11:23:46] I wand to do spd device which requires Internet
[11:22:46] What do you mean?
[11:22:37] Xiaomi PocoPhone M5S MT6789 Auth Bypass Brom Unsupported
[11:21:46] You can with previous exe, but will not be able to use latest exe
[11:21:25] How to renew: Send your dongle S/N to any seller and oder [CM2] support renew for 1 or 2 years
Sellers - https://infinity-box.com/buy/
[11:21:06] you can use without renew
[11:20:55] Other side pics with shield properly removed
[11:20:46] How do I renew?
Can\'t I use it a little more before I renew it?
[11:20:41] 1. Flash with good firmware may helps
2. Repair BB if need
[11:20:21] Expired bro, needs to renew
[11:18:58] do not run exe from archive, upload it to folder before run
[11:17:05] Try now
[11:15:50] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[11:11:34] ii try to formate frp only dear
[11:11:01] Pls and pls help with file of oppo 1941
[11:11:01] Oppo a9 file
[11:11:01] Type: Infinity-Box/Dongle [CM2]
S/N: 4E9E1D98
Username: 004E9E1D98
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0153; Expired: 07-Sep-2022
Your [CM2] support period is expired.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years
How to check support period - https://infinity-box.com/doc/?r=17
[11:10:50] How it was happened your phone become damaged? Steps?
[11:10:03] Sign In here https://infinity-box.com/service/
See your account https://infinity-box.com/doc/?r=17
[11:06:48] 4E9E1D98
(CM2Serial)
[11:05:09] Pls how do I know if my license has expired??
[11:04:00] I\'m looking for Tecno BE7 test point Please
[10:51:18] i neef samsung a04e dead boot repair firmware help me dear
[10:35:13] Instant of these nonsense words little bit search in forum can solve ur prblm
[10:33:28] If prblm appears to u then u have to blame ur PC not cm2 ,, what is ur prblm ?
[10:31:08] If it happens to you on every update, then you should blame your system not cm2
[10:29:46] No
[10:28:50] And this problem appear on every update of cm2
[10:28:25] Don\'t tell me what I have to Todo I try to solve this nonsnce from from 6 hour but still problem
[10:26:54] Not working for me ....try first install before releasing
[10:20:47] ask help instead of talking nonsense.
[10:20:19] V2.42
[10:19:01] It works for me, just ask for help
[10:14:18] Nonsense update
[10:14:00] Wel
come Atif Khan
Here is English chat.
Русский, Українська, Белару́ская тут и там
العربية Arabic
[10:13:21] Cm2mtk2 not open a42 version kindly stop nonsense update of cm2
[10:11:12] This unit is not supported yet.\r
Try again some time late.
[10:11:12] Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : SW_T18546AA1_V066_M10_NF_NOKIA_Iris_USR_MP
Platform Version: MOCORTM_17C_W21.14.6_P1_Debug
Project Version: pike2_pub
BASE Version: FM_BASE
[10:08:21] Kindly open this little shield here let me see
[09:58:10] Hii can any plz share Samsung grand prime + flash file
[09:48:08] Hold
[09:48:07] Thanks man
[09:47:45] Motherboard pics?
[09:47:37] SN
[09:42:46] vivo v23 pro 5g identify faild please help
[09:42:27] Infinix hot 20i x665c. Please I need the test point
[09:42:21] Any solution please
[09:41:51] Hi
[09:38:39] Is it serial or username?
[09:32:27] 21-02-2023 17:56:58 Username: 03F40C9D7A ==> Scan F:\\TOOLS\\INFINITY\\ for report.log ==> Scan c:\\InfinityBox\\ for report.log ==> Scan c:\\Program Files\\ for report.log ==> Scan c:\\Program Files (x86)\\ for report.log Found files: 0 ==> Scan F:\\TOOLS\\INFINITY\\ for *.ibin.log ==> Scan c:\\InfinityBox\\ for *.ibin.log ==> Scan c:\\Program Files\\ for *.ibin.log ==> Scan c:\\Program Files (x86)\\ for *.ibin.log Found files: 0 ==> Scan F:\\TOOLS\\INFINITY\\ for fault.bin ==> Scan c:\\InfinityBox\\ for fault.bin ==> Scan c:\\Pr
[09:31:30] Write in NVRAM FILE BRO
[09:31:03] guys?
[09:30:49] MEID: 34123D6B2B3058E50494B2C40A031A25
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: 5D6A9B9A919A496825C23B9036C2A2501015514905F9F43F268BA61070043ACF
SLA: Local Auth
SLA: Starting Auth
SLA: Continue Auth
SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2112
[0656ff20] C:\\InfinityBox\\CM2MT2\\boot\\0_base\\base_v2112\\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6785
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
T
[09:30:19] No response yet from you
[09:30:11] Noone knows what happened to ul bl data safe function?
[09:29:39] Sure
[09:28:53] Done?
[09:28:25] You mean hot 4 lite ?
[09:27:00] Fix your PC https://infinity-box.com/?r=100103
[09:26:48] Full flash bro
[09:26:25] My cm2sp2 behaving this way after news update
[09:26:03] Scan your pc
[09:25:46] Motherboard pics?
[09:23:39] YouTube might help
[09:22:47] Are there any developments on Nokia c1 2nd edition network Unlock @Admin
[09:21:11] 0v
[09:16:17] Hey what happened to unlock bl ud safe option?
[09:15:15] Here
[09:14:58] Where should I send the serial to?
[09:14:05] use CM2SP2.exe and CM2-Helper https://infinity-box.com/news/?r=4286
[09:12:34] Your sn ?
[09:12:28] Hello there !
I need nvram a507ls itel a24 pls
[09:11:51] Cm2sp not working or installing after new update
[09:11:48] Found 1 file a507ls
1. itel_A507LS_SU335_11_KE_SF_LC_V007_20210907
[09:09:50] Found 20 files Energy x, search limit is 20 files per server
1. recent_MT6761_mPTech_Hammer_Energy_2_2022_11_Hammer_Energy_2_2022_v11.0.7_20211222_RP1A.200720.011_pd8d23_xwp_v31_he2_v4
2. recent_Hammer_Energy_18x9_v1.0.9_03092018
3. Dexp_Ixion_Energy_XL5_R01_10.02.2015_V1.8W
4.
[09:09:31] Done ?
[09:09:16] Needs to renew license bro, kindly send your sn direct message
[09:08:46] mailto:help@infinity-box.com
[09:08:09] Help a brother, Imy Cm2 licence has expire, I can\'t do sod phones.
[09:07:33] Kindly try install SoC drivers from support
[08:52:54] hi nokia ta 1155 driver sprd for rest lock
[08:50:52] Mt2 can bypass auth to flash xiaomi mtk phones?
[08:41:21] Hi
How to repair imei Realme C25Y(RMX3268)
Please help me
i want to repair single imei. second
[08:18:13] X657
[08:11:16] Model
[08:10:29] Who hv smart 6 mdm file ?
[08:09:53] I want to ask, the one on AliExpress, if order for it, will it come with activation?
[08:07:47] Indiamart
eBay
Alibaba
[08:00:38] How can I get the Cm2 dongle in Dubai
[07:55:44] Infinix X665E test point
[07:49:06] Hello sir may cm2mt2 give problem I reinstall mane time Sam error
[07:30:22] Ok thanks
[07:24:50] Full flash after fix
[07:16:40] hi
[06:22:52] vivo y16 test point
[06:09:15] Please friends how do I resolve this problem oppo A15s after repairing imei number
[06:07:49] Yes bro
[05:34:03] contact Admin Or Conatct Your REseller
am Also A reseller
[05:33:19] how can i renew my cm2 license
[05:21:20] Good morning!
[05:20:54] Pls x556 test point
[05:09:45] Good morning fellows
[04:02:06] Operation : Read UserCode [ v1.20 ]
1. Power off device, remove battery
2. Not hold any key on device!
3. Insert battery in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
Error : Boot Failed!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
[03:55:08] Hello, Nokia TA-1276 how to reset setting?
InfinityBoxTalks 2023-02-21
[22:33:52] Found 5 files Nokia G20
1. nokia_g20_ta_1336_ta_1365_test_point.jpg
2. nokia_g20_MT6765_HMD_Global_00WW_11_00WW_1_100_SP01_RP1A.200720.011_RNN_sprout
3. nokia_g10_ta_1334_g20_ta_1336_ta_1347_ta_1365_here
4. nokia_g20_rnn_MT6765_539FE7DAA75BCF042E4D90598025C20A
5. nokia_g20_rnn_MT6765_0DCC70386BB9121B5CA551A3F08A22E9
Channel - Group Chat
[22:22:46] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r
[22:22:46] Can you please activate cm2sp2 memory tools and update on patch mi, Redmi account no relock on MTK and Qualcomm CPU , IMEI repair on new oppo ,vivo, Alcatel etc
[22:15:32] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r
[22:15:32] Can you please activate cm2sp2 memory tools and update on patch mi, Redmi account no relock on MTK and Qualcomm CPU , IMEI repair on new oppo ,vivo, Alcatel etc
[20:48:47] Try here @FlashFileSearchBot
[20:48:47] Need file
[20:46:55] Sure
[20:46:35] Smart 6 latest security not passing fdl
[20:44:55] Frp itel A58 A661w
Plz solution
[20:43:53] Hi to all
[20:29:34] Gooooooooodnyt frm here❤️💋👌
[20:29:34] Not me it mistake ...so so sorry
[20:27:44] Need help TA-1365
[20:07:29] hi !
i need help how to connect nokia TA1203 ( nokia 105 2019 ) to the software
which software (i think best 1 nk2 )
and how to repiar imei pls guide
cause the software showed gray area of the repair section
[19:56:28] Bad news for samsung frp with *#0*#.
Samsung has close bug with february 2023 patch . 😬
[19:43:33] Have you fixed this issue?
[19:37:02] Download Latest SamFw Tool V4.1 Remove FRP for new security
[SAMSUNG]
[ROOT] - Add Change CSC root mode: automatic/manual mode
[Test Mode] - Improve Remove FRP (new security)
[LG]
[EDL 9008] - Add Support LG Q6, G5, G6, V20, V35, V60
[XIAOMI]
[SIDELOAD] - Optimize Read offline micloud information
- Check device supported before do job
[ANDROID]
[ADB] - Add Hide Developer options (Thank for Mohamed Janati for idea)
Fix update server for some computer
Fix some bugs
👇👇
.
JOIN FREE GROUP
F
[19:21:29] During identification or flashing it takes several minutes above normal
[19:05:14] Cg6 test point needed
[18:57:25] Wipe and FRP Done Successfully
[18:56:58] Vivo 2015 Y1s
[18:56:39] Operation: Reset Settings/Format FS [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: SMART RESET
Wait...
WARNING!
Format FS WILL RESET ALL USER DATA!
Make sure about correct format mode selection!
Continue?
Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB VCOM (Android) (COM27)
MODE: BOOTROM; PORT: 27
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP:
[18:56:39] Operation: Read Firmware [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Destination: C:\\Users\\Tumelo\\Desktop\\2015 y1s\\
Disk free space: 532.04 Gb
Wait...
[+] Pack FW [Sparse]
[+] Forced Read
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB VCOM (Android) (COM27)
MODE: BOOTROM; PORT: 27
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP: MT6765 SBID: 0x8A00 HWV
[18:56:22] Scan preloader...
EMI: MT6765 preloader_k65v1_64_bsp.bin with 5 memory type(s) supported
1. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 512.00 MB
2. eMMC LP_DDR4X ID: 150100445836384D42 Ven: Samsung | Dev: DX68MB RAM: 3.00 GB
3. eMMC LP_DDR4X ID: 1501003458364B4D42 Ven: Samsung | Dev: 4X6KMB RAM: 2.00 GB
4. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 2.00 GB
5. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 3.
[18:56:22] S/N: 5D460AE2 v0154
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.42
Firmware files: C:\\Users\\Tumelo\\Desktop\\
Backup files: C:\\InfinityBox\\CM2MT2\\backup\\
Backup files: 61 dirs: 0
Build device list...
Init environment...
Load IDBase v124493 Ok
Operation: Identify Device [ v2.42 ]
Platform: FireFly SmartPhone - MT6580/6735-39|52|53|61-65|68|71/6983, Helio G/P
Mode: FLASH
PORT: BOTH [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[18:52:14] or advanced partiotin
[18:50:57] Please add emmc tool like mtk2 in SPD2
[18:29:06] which phone is showing an error when connecting the device
[18:28:10] change the driver associated with the hardware that is causing the error
[18:25:38] Fujitsu Arrows U hard reset method please
[18:14:29] 👌
[18:14:15] Help with solution sir
[18:12:56] need loader xiaomi mojito or sunny w/o auth
send please 🥺
[18:11:29] Driver problem
[17:52:15] Please I\'m having a little problem
[17:52:00] Hello
[17:38:15] Brom disabled
[17:38:07] No
[17:36:54] Nokia g21 password unlock possible with SP2?
[17:34:36] Scan your pc
[17:12:24] Energy x 1 bin file please
[17:08:10] Ok sir
[17:02:15] I can assist u
[17:00:02] how do i unlock Galaxy S7 edge network looked?
[16:14:41] What\'s the support mail ?
[16:14:22] Hallo help someone to move activation from old dead dongle to a new dongle.
[15:38:06] I will look for it. Thank you
[15:36:19] Do what you been tall and fixed brother thanks
[15:35:24] Make this https://infinity-box.com/?r=100155
[15:34:54] Make this https://infinity-box.com/?r=100155
[15:32:04] In miracle crack, virtual serial port driver program is used to work with normal mtk. I tried it and it worked.
[15:30:54] miracle crack virtual serial port driver program is used to work with normal mtk. I tried it and got rid of it
[15:30:38] Hello
[15:26:52] Ok
[15:23:02] I experience bluescreen help
[15:22:50] What are you doing with this 8n your PC???
[15:21:04] So do what you was tall. And fixed
[15:13:29] Infinity team pliz pull down a032f firmware site. It’s not the correct file. It’s not working
[15:13:10] I did not share cm2, I just installed this program
[15:10:17] Share?
[14:57:43] Bro send full log, not just this short form
[14:46:27] You shire you cm2 ???
[14:38:27] I don\'t know how to get help from this place. Is there any other way to contact someone?
[14:37:56] Nokia ta-1468 sim network unlock helps please 👆👆
[14:37:34] Yes brother I did identify and i did the operation but still sending the same massage
[14:30:58] Make this https://infinity-box.com/?r=100155
[14:29:34] Assalomu alaykum
[14:29:34] i used this app and it blocked me i don\'t know what to do
[14:25:58] Kg6 test point needed
[14:25:33] Same message as in?
[14:24:17] Note: No reset after this 👍.
[14:23:43] Make this https://infinity-box.com/?r=100155
[14:23:43] Dongle misconfiguration
[14:23:28] Use tp bro
[14:23:10] Model ?
[14:10:56] Problem 2.42 problem fixt
[13:59:26] I did sending same massage
[13:35:26] support.halabtech.com/index.php?a=downloads&b=file&id=489338 help this
[13:28:44] i think yes
[13:04:33] 9 feb 2023 sent mail no reply... sent......no replay .21 feb 2023
help@infinity-box.com
[13:04:11] Successfully done ✅ thank you sir
[12:54:16] Plz what can I do
[12:54:01] Plz help
[12:46:11] Tecno kf7j jump to boom.
No test point
Any solution
[12:14:59] I can send one
[12:14:17] Do you have good quality PCB photo?
[12:12:26] Can\'t find test point all relative test point does not work
[12:12:17] In most cases sw works after support expired.
Exception: some server-related features may be limited
[12:11:17] Run CardID.exe - https://infinity-box.com/?r=35
Select Card-Reader
Click to \"Read\" button and copy/paste text
DO NOT send screenshot/video but copy/paste text from software window.
[12:10:48] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[12:10:34] have you tried with test point?
[12:10:15] What do you mean \"slow\"?
[12:09:39] So long as you want
[12:08:49] Please Make this https://infinity-box.com/?r=100103
[12:08:44] cant wipe userdata too
[12:08:17] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
VER : BP_R2.0.1
LEN : 10B7364C1 ( 4.18 GiB )
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V78-20221102
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : X6511B-F631
[12:07:01] Use default loaders selection, it works
[12:06:09] Ok friend, I will teach you how to download files with browser.
let me know as soon as you will be online
[12:05:25] Depends on your seller, but all I know is that A year activation always be active on dongle
[12:05:08] I think you have no cable connected or something like that.
if you can send here your problem info all users will be thankful
[12:04:42] Try bro, if it doesn’t it won’t affect device
[12:04:27] First i want to buy the dongle. Doesn\'t I need to activate the dongle after I buy it?
[12:03:51] Do you see this button?
[12:03:48] Just A year or 2 years license required
[12:02:52] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it
[12:02:32] Hi,
\"AB2D3A47\" is not exist.
What is the order number?
[12:01:40] Kindly use your downloaded fw as fdl manually
[12:01:04] Want to buy or want to update license
[12:00:27] Found 2 files x6511B
1. infinix_X6511B_F6318_11.0_OP_V026_20211027
2. infinix_X6511B_F6318_11.0_OP_V022_20210926
[11:59:51] Have you tried?
[11:59:51] Try YouTube tricks first
[11:59:16] yearly renew is paid
contact to seller
[11:58:54] Sure but all still stop at flashing
[11:58:26] it looks like his Telegram account was hacked
[11:58:24] I saw it but it is credit limited 120
[11:58:01] you forgot password, my friend. Please in future write to to the paper out.
Now you can reset password here https://infinity-box.com/service/
[11:57:41] When the heck is this ?????
[11:57:23] Download fw, extract, lauch Cm2mt2 and manually select preloader from downloaded fw.
[11:57:17] install libusb
https://dl1.infinity-box.com/00/pub/?dir=/software/other/
[11:56:41] try with another loaders for similar model
[11:56:12] Motherboard pics ? Let share ideas 💡
[11:56:10] Hi,
There is no limits. The only limit - to use new updates you need renew. Old ver works 100 years
[11:55:52] First identify before you perform an operation
[11:55:46] Other FDL works but can\'t flash it all stops at update PMT and if I untick PMT it still fail
[11:54:44] Can\'t full flash give this message
[11:54:20] Thank you I await your reply
[11:53:41] Search works well, friend
Anyway let me copy/paste here solution: try to select another loader. Probably loader from other similar phone helps.
[11:53:00] Found 5 files x665b
1. infinix_x665b_test_point.jpg
2. infinix_x665b_032ecf95.preloader_x665b_h6222
3. infinix_X665B_11_X665B_H6222IJKL_R_OP_220330V285_RP1A.200720.011_x665b_h6222
4. infinix_x665b_MT6761_2410179C7B9A04AA63373F2E52B12
[11:52:40] Why?
What is your problem?
[11:52:05] Let me check search function here so people can use Ctrl + F button.
Wait a moment!
[11:51:48] X665c test point please
[11:49:32] Admin please what\'s the way out of this
[11:49:16] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Open : X6511B-F6318-11.0-OP-V78-20221102.pac
VER : BP_R2.0.1
LEN : 4.18 GiB
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V78-20221102
Reading package ...
Read package finished!
Product Brand : Infinix
Product Device : Infinix-X6511B
Product Model : Infinix X6511B
Product Name : X6511B
Patch Level : RP1A.201005.001
Display ID : X6511B-F6318-11.0-OP-V78-20221102
Ver. Incmt : OP-V78-20221102
Ve
[11:49:08] Please help
[11:49:03] Itel A661w v021 unable to flash
[11:49:00] See line 6. and 7. here https://infinity-box.com/price/
[11:48:27] Use default loaders.
Waiting for your good success
[11:48:05] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it, preloader is there
[11:47:42] https://infinity-box.com/buy/
[11:47:27] Who?
[11:46:42] Nice
Send it here for all users
[11:46:03] You can not run [BEST] tool at Smartphone.
You must install [BEST] to your PC
[11:40:06] Tecno kf7j test point need
[11:31:52] use ur firmware as pac file
[11:25:41] Who is admin ?
[11:21:50] Send your Infinity username to seller https://infinity-box.com/buy/\r
How to know username https://infinity-box.com/service/
[11:21:50] How much is it?
[11:20:18] Any Cm2 for sale
[11:16:49] Thank alot but does this preloader work for X665c
[11:16:34] ITEL S18
[11:15:49] Hi help me itel boot da
[11:10:40] Just only paid activarltion.
[11:08:19] THANKS
[11:06:37] Hi
[11:06:17] No what?
[11:04:49] No..
[11:03:25] Do I need to change the SIM itself or just active it in 1year
[11:01:33] Found 22 files f100, search limit is 20 files per server
1. Jazz_MT6276_NAND_GALAXY1_W_HAIER_PK_PCB01_hspa_MT6276_S01.JF100_H01_S005_PK_Jazz_Xplore_JF100
2. Vox_109_IFLY23D_GEMINI_ULC_09A_PCB01_gsm_MT6223_S00.F100A0_E0_YK07_1
3. Voxtel_Voxtel_RX20_F100_Nov_1_2009_4m_w_ffs
4.
[11:00:21] all the time. but, for new keys, the support is active for 1 year. then it will need to be extended. if you need new versions.
[10:58:02] Hi cm2 or some people help me fdl itel S18 s663l
[10:57:10] I want to buy
[10:56:12] Hi for how long can I use cm2 dongle
[10:54:35] https://dl1.infinity-box.com/00/pub/?dir=/software/other/&uid=19409&file=libusb.7z
[10:53:19] hi need help please
[10:51:23] my cm2 dongel user name pasword wrong error ??
[10:48:42] hi guys vivo v23 5g frp bypass
[10:17:35] https://www.slotbetc.com/?id=09659461874
SIGN UP WITH FREE CREDIT WHEN SIGNING UP, No CS needed, Low Turnover!
[09:49:45] Please I need infinix x6511B factory sign firmware
[09:43:04] hello Dear Infinity Team, My Sn is Wrong Submit Serial No=>AB2D3A47
Please Rejected this order
This is Righit SN SIR AB2D3A37
[09:42:57] Help
[09:41:46] H
[09:34:52] 👆👆👆👆🙏🙏🙏🫦
[09:34:48] Please where can one get X665c preloader
[09:34:09] Admin helps for Nokia ta-1468 sim network unlock
[09:33:50] Tp + preloader
[09:06:00] X665 mtk broom solution please anyone?
[08:52:07] Il need to tecno bf7 testpoint
[08:51:55] Hello
[08:46:44] Rmx3511 imei repair posible cm2 please help
[08:46:36] Dm me
[08:39:54] Nokia ta-1468 sim network unlock helps please 👆👆
[08:32:34] ؟
[08:32:31] ؟
[08:31:21] it direct me to this page when i try to download test point image
[08:30:39] I should work with best1 or best2 ??
[08:30:06] Why my best dongle cant recognise phone???
[08:28:37] Iis it paid service? i have tried to signin to download the image bu it direct me to another unrelated page
[08:20:26] Where are you chatting from?
[08:16:47] Please how do I solve this problem
[08:16:06] Gionee M7 DA file please
[08:14:55] https://forum.gsmhosting.com/vbb/f296/oppo-a77-cph2385-bootloop-after-writing-backup-same-device-3133614/
Posted here
[08:14:46] this is a leasing phone
[08:13:34] Oppo a77 cph2385 bootloop after writing backup ,please help
[08:09:13] A032f need unlock
[08:05:59] Please fix this
[08:05:32] Cm2mt2 not open all other working fine
[08:02:34] Yeah
[07:29:56] Then use it
[07:28:54] Yes
[07:28:34] It can remove it if supported XAOMI
[07:27:00] What of unlock tool
[07:26:44] Put it to side lode then remove it
[07:26:26] Nope eft pro
[07:23:49] Security plug-in permanently removed
[07:23:42] What of unlock tools
[07:22:41] any one i need test point for infinix x665b
[07:21:48] CM2 can\'t remove MI ACCOUNT
[07:21:26] Security plug-in successfully removed...
[07:20:55] Security plug-in
[07:20:51] Please can cm2 work on Redmi note 9 pro to remove MI account?
[07:19:46] I told you I have for all version but since you don\'t believe
You can continue searching around though
[07:14:45] Hi for how long can be use cm2 dongle
[07:02:41] Latest setup Sir
[07:00:49] Normal M7 not M7 power
[07:00:03] Dm me
[06:59:46] Use Nck
[06:58:29] Infinix X665C stops at Brom
[06:57:44] Done that still fail
[06:55:17] Use nck and wipe it again
[06:54:10] Gionee M7 security wipe with cm2 but hang on Logo after wipe
[06:48:45] Whats the model of your phone and whats the problem
[06:36:26] FLASH FORMAT ONLY
[06:36:14] Ontick PMT
[06:34:26] Not work
[06:26:23] What about this error
[06:26:13] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Open : X6511B-F6318-11.0-OP-V78-20221102.pac
VER : BP_R2.0.1
LEN : 4.18 GiB
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V78-20221102
Reading package ...
Read package finished!
Product Brand : Infinix
Product Device : Infinix-X6511B
Product Model : Infinix X6511B
Product Name : X6511B
Patch Level : RP1A.201005.001
Display ID : X6511B-F6318-11.0-OP-V78-20221102
Ver. Incmt : OP-V78-20221102
Ve
[06:25:36] Ok boss
[06:25:36] Ok boss
[06:25:26] Check your inbox
[06:25:18] We have scammers in this group
[06:25:09] Ahhhh
[06:24:36] This Guy said he is not a SCAMMER but he has not refund my money nor give me solution for ALL BROM SOLUTION he claim to have
[06:24:06] The phone requires the correct file
[06:23:36] When this happens I have face a lot of smart 6 problem
You I realize that is was the phone requires the exact file for it and the fdl
Dm bro
[06:21:50] Yeah bro dm me
[06:21:04] You mean you also have for SPD android 12?
[06:06:03] Am facing this at the moment, please help.
[06:03:54] Infinix x6511b
[05:59:26] Good morning boss, please I will like to ask. Is it that when your cm2 expired you can\'t do anything using the cm2 SPD tab? Or is there anything am missing?
[05:37:23] Ok sir thank
[05:37:08] I can read the firmware and format it after formatting I can flash with the fw
[05:34:39] What\'s the issue
[05:33:52] Motherboard pics?
[05:33:26] Read fw from device, Format Flash with same fw, Repair sec after device bootup, then enjoy .
[04:32:26] Dm
[04:30:19] I have solutions for easy security plugin
Remove permanently
[04:29:32] Sorry guys I was not around for some reasons
How is everyone here
[04:24:56] There is
[02:09:13] Please someone help me out
[01:54:50] 2.42
[01:20:47] what function do you need?
[01:18:52] What is cm2mt2 version?
[01:15:17] https://infinity-box.com/support/
[01:14:06] Do you want to fix this unit?
[01:11:48] click here https://infinity-box.com/service/
[01:10:09] Here is chat for enginners but not a potatoes trading market so you must learn how to use browser or at least read manual.
Do it now.
[01:06:46] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[01:00:38] https://infinity-box.com/?r=23
[00:56:26] Setup server access https://infinity-box.com/?r=100166
[00:52:40] model?
[00:51:25] what is the problem with the phone?
[00:44:47] It was many questions
answers?
[00:33:14] It may be something with your PC after windows update
check https://www.google.com/search?q=0x0c000007b
[00:32:35] okay
[00:30:56] Infinity Best Card Loss
How can I replace
[00:26:42] Found 3 files RMX3263
1. oppo_realme_Realme_C21Y_RMX3263_UMS512_11_RMX3263_11_A.85_A.75_RP1A.201005.001_S19610AA1
2. oppo_realme_Realmy_C21_Y_RMX3263_11_RMX3261_11_A.79
3. recent_Realme_C21_Y_RMX3263_R_Edition_RMX3263_11_A.93
[00:26:13] Check here https://infinity-box.com/buy/
[00:25:54] check cable
[00:25:03] model?
[00:24:41] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[00:24:17] What is the problem?
[00:23:55] good
use it
[00:23:26] Make this https://infinity-box.com/?r=100155
[00:23:06] reboot PC
InfinityBoxTalks 2023-02-20
[23:14:33] Server work
[22:32:33] 👆👆👆👆
[22:32:13] And this
[22:31:38] Error smart-card not found for what??
[22:15:53] Any solutions please
[21:21:22] **سرویس اختصاصی* *
Wireguard 🚀
-سرعت بالا
-بدون محدودیت در حجم
-بدون قطعی حتی یک لحظه
-سرور های متنوع و هوشمند (بدون نیاز به تعویض دستی)
برای ایرانسل همراه اول و وایفای
ارتباط ادمین:
https://t.me/wireguard_vpnnn
[21:10:00] Yes I have
[21:01:06] No admin I still need ghis
[20:57:04] No sir
[20:49:21] I notice it\'s the latest itel
[20:49:04] Other phones are working , just this one and one other itel
[20:48:10] Infinix x6511b frp help
[20:46:44] Check device port properly
[20:44:35] Try with built in loaders
[20:44:08] Yes you need to identify first before performing any operation
[20:43:53] Device issue ?
[20:43:04] Found 4 files TRIFONE
1. trifone_joyar_passion1_MT6580_2ACC98D927F4C258FD62FA72471838E6
2. trifone_joyar_passion1_MT6580_C563821A530E43376F3DD9EEEE66D6F3
3. trifone_x7_MT6580_6537A4038B422EAF240B13A4895C3900
4. trifone_x7_MT6580_68EB
[20:31:20] Done?
[20:23:54] please help safe format feil: unknown vendor how to fix that
[20:20:46] Solution please
[20:06:55] Done
[20:06:49] Solution please 🙏
[20:06:42] Itel S663L Error: protocol Handshake failed
[19:58:24] Of infinity cm2
[19:57:48] Please i need a contact of sellers in nigeria
[19:29:48] Found 10 files Poco m4 pro
1. xiaomi_eng_rom_Poco_M4_Pro_4G_Fleur_ENG_ROM.fleur_factory_images_FACTORY_FLEUR_0126_11.0
2. xiaomi_evergreen_evergreen_eea_poco_m4_pro_5g_MT6833_26912EB279E1C831A9ACA0715DF67445
3. xiaomi_evergreen_evergreen_ru_poco_m4_pro_5g_MT6833_935815DFF08850EA4C04EC5EB2F51ECA
[19:28:37] Realme RMX3263 file link please
[18:55:01] Good evening everyone, please I flashed Eng ROM for Poco m4 pro the phone dead after successfully flashing, who have the firmware that will wake the phone?
[18:47:06] So at a certain point u think da files will solve blocked testpoint cases 😒
[18:36:47] Yeah .......cm2 do d magic ......again 😂😂
[18:36:28] 👌👌👌
[18:27:38] After the usblib exploit everyone one the market made tools and updates the could service MTK phones. But know with blocking of Brom and testpoints everything is becoming hard and it\'s time for cm2 to shine again back to DA files.
[18:12:48] Nothing found for a661wp
If you will get the file upload it to support with iosFileUploader
[18:12:26] Found 2 files a661w
1. recent_A661W_V390AE_11.0_OP_V020_20221021_1151
2. itel_Itel_A661W_V008_220216_11_SPD
[17:18:37] How can I get it??
[16:56:22] Network locked
Solution available
[15:53:29] fdl x6511b error .i need help i have lasted boot pack
[15:50:38] Inbox me
[15:49:13] Read here and do the job
[15:45:11] احتاج الي اصلاح اصدار النطاق الاساسي ل جهاز REDMI NOTE 9 مع العلم اني حاولت ب استخدام الدونجل بدون جدوي
[15:29:28] I need help with this
[15:01:19] who can help me TRIFONE passion1 firmware mtk
[14:54:37] Tecno kE5 demo phone please help me
[14:27:06] https://www.terabox.com/wap/activity/recipient2?code=f_1020346790576129_4401195087405&pid=aGoldTask
[14:08:20] Please I need help with this
[14:03:50] Some X551B will boot successfully, some fdl error, any solution?
[13:58:03] Good
[13:58:01] Ya with that tp
[13:57:48] Sure
[13:56:59] Thank you just done now
[13:56:17] Remove motherboard from lcd frame and send other side pics
[13:47:15] Please we need lg update
[13:41:54] Tecno Be8 test point please help me
[13:27:16] No response
[13:23:45] nullOperation: SP Unlock [ v2.38d1 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM11)
MODE: PRELOADER PORT; PORT: 11
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM: Init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
[13:16:19] Yes I understand I can send a log but I once sent the same mobile phone\'s log sometime ago it\'s an(( itel A510w))
[12:58:59] Cm2 hedek for mind
[12:49:29] Is right one
[12:47:33] Is it the one?
[12:28:02] imei?
[12:27:33] Nothing found for jat-lx3
If you will get the file upload it to support with iosFileUploader
[12:25:09] Found 2 files x665c
1. infinix_x665c_MT6761_399267CF8F0511F182BDB9551B8D0273
2. infinix_x665c_MT6761_E5F16BC6E94D80DC54B7AF76C9ECB29D
[12:25:01] Found 5 files x665b
1. infinix_x665b_test_point.jpg
2. infinix_x665b_032ecf95.preloader_x665b_h6222
3. infinix_X665B_11_X665B_H6222IJKL_R_OP_220330V285_RP1A.200720.011_x665b_h6222
4. infinix_x665b_MT6761_2410179C7B9A04AA63373F2E52B12
[12:24:55] Any solution to my problem?
[12:24:13] No
Given image is just Rx/Tx pinout
[12:23:29] Work about more software features is in progress, new software will be released as soon as it will well tested.\r
\r
Please tell us list of required supported CPU types and functions
[12:23:29] We need Qualcomm update
[12:22:25] i try but cant find any one who can help me
[12:18:20] Select another BASE/MODEL/DA from the list at top
[12:17:38] https://www.youtube.com/results?search_query=cm2+b310e
[12:16:35] For now it\'s little bit hard to bypass it
[12:15:02] select another BASE/MODEL/DA from the list
[12:14:19] your phone is MT6781 but you select loaders for MT6983
What do you think about it?
[12:12:23] yes, it\'s in progress.
and also it will be good if you can, at least, write here device name and network name this device is loacked.
also need firmware backup and sw log text for unlock attempt.
Did you get my point friend?
[12:11:58] Thank you big team
[12:11:22] Try another PC
[12:11:05] Have you got it?
[12:09:55] select another model/loader or use PAC file as loader https://infinity-box.com/?r=100179
[12:09:18] I\'m looking sir but don\'t find
[12:08:37] run Infinity CM2MT2.exe and do the job
[12:07:35] Tecno kF6j frp possible
[12:06:55] run CM2SP2.exe
[12:06:33] It can be that you should use Test-Point
[12:05:25] Download backup file for your device https://infinity-box.com/?r=100215
Unpack it
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[12:04:39] Have you got it?
[12:02:47] Thanks team cm2
[12:00:22] First step is: Make your brain ON!
And do not post here your account password for everybody.
[11:59:23] https://forum.infinity-box.com/viewtopic.php?t=15657
[11:59:17] Good 👍
[11:59:14] Ok
[11:59:03] Pls update cm2sp2 module
[11:58:46] https://forum.infinity-box.com/viewtopic.php?t=15657
[11:58:03] select another model/loader or use PAC file as loader https://infinity-box.com/?r=100179
[11:57:52] select another model/loader or use PAC file as loader https://infinity-box.com/?r=100179
[11:57:40] You\'re the best
[11:57:27] https://forum.infinity-box.com/viewtopic.php?t=1283
[11:56:53] Infinity #CM2SP2 boot-pack v1.16 with updated loaders https://infinity-box.com/?r=19&dir=/software
[11:55:19] Make this https://infinity-box.com/?r=100155
[11:55:12] This error comes when ever I try to [smart reset extra] any phone
[11:55:09] https://infinity-box.com/news/?r=4292
[11:52:56] what is this problem?
[11:51:40] I am afraid your account is blocked now because you shared password for all users here.
It was stupid move, my friend, do not make the same again.
Now you must wait 24 hours and send e-mail to support.
good luck!
[11:51:25] Realmi RMX1811 Qualcomm ime 00 baseband allredy ok.?
[11:51:15] MATE NOKIA 1.4 I NEED TO RESET PASSWORD
[11:50:24] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[11:48:43] koi mera masla bhi hal kardo
[11:46:16] Thank you
[11:44:08] Nop
[11:37:31] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[11:36:47] Reboot PC and make this
[11:36:03] eltima
virtualhere
sure?
[11:35:47] Is it your first ci6?
[11:33:48] No sir
[11:33:01] it may be some kind of new firmware version.
if you must return phone fast - lock bootloader back
if you can keep phone with you - wait, you will get an info in some time
[11:31:16] This version does not connect with test points. Help please?
[11:30:54] Ci6
[11:30:32] Do you have any sharing tools installed?
[11:06:36] Ok
[11:05:30] Cg6
[11:04:44] Model
[11:04:39] Thank you
[11:04:22] Just Google it steps available online
[11:01:33] Please I need help with this my cm2 mtk is showing this problem
[10:56:40] Do you have the command prompt
[10:56:01] Via fastboot
[10:55:15] How
[10:55:04] For MT6580 use command
[10:55:03] yes
[10:54:21] MTK
[10:52:23] Which processor is your phone?
[10:51:12] Operation: Bootloader unlock [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
[Vol+ | Vol-]Waiting for device connection...
PTFN: MediaTek USB Port_V1632 (COM27)
MODE: BOOTROM; PORT: 27
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init...
Init passed
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]
MEID: 1E95C94DB3EA63EE3D220E84
[10:48:51] If I set to firefly, I get any error message
Bootloader state: Unknown
[10:47:26] xiaomi mi 9 after unlock bootloader phone auto fastboot mode how to solved?
[10:47:08] It\'s keeps saying \" Device is not supported or wrong operation mode selected\"
Wrong platform selected for operation
Set platform - > firefly smartphone
[10:43:11] On it
[10:40:14] Lauch cm2 mt2 bro, I think the option is on service tab
[10:38:29] How, please can you explain
[10:36:20] Yes
[10:28:01] Can I unlock BE6 bootloader
[10:20:15] It posible flash note 10 5g mt6833 wiht cm2 mt2
[10:04:36] Nothing found for loader firehose
If you will get the file upload it to support with iosFileUploader
[10:01:33] ??????????
[09:28:23] 😭
[09:13:04] Okay
[09:13:00] developer plz help me splve my problum
[09:09:32] cm2 dongel active done but username id pass wrong error plz solve my problum
[09:08:50] yesterday i was renew cm2 device
[09:08:08] plz help me
[09:06:23] Taking calls it\'s the the point I will lose money if is a slow guy, so since he can\'t be quick that mean he is not a good business man working with people like that will make you lose money and waste time
[09:04:44] Oh! But is he taking his calls?
[09:04:03] 3 days is a long time all the solution have been paying for are given within the hour if he can give within 1hr I will try it out
[09:02:13] It\'s not by force I should fix the phone
[09:01:58] I don\'t have such time I have to return device so if he can\'t provide solution ASAP let him refund me then I will return device to customer
[09:00:18] 💡
[09:00:03] 😎
[08:59:40] He fixed mine, but he is very slow. Took me about 3 days of calling and texting
[08:59:31] Brom error no need test point
[08:59:13] On what solution if I may ask
[08:58:56] 🤔
[08:58:44] And he has not refund me since last night he said so
[08:58:27] I have pay the guy since yesterday 19th Feb 2023 12:32 PM and he has not given me any solution he said he will refund me that am inpatient
[08:57:51] Nothing found for S663l
If you will get the file upload it to support with iosFileUploader
[08:57:39] Kindly use default loaders
[08:57:27] What’s the issue from your ends?
[08:56:30] Guys please, has anyone pay for this solution? And is the solution working?
[08:24:00] anyone help me with fdl itelW6501 plz
[08:22:59] Itel s663l firmware 🙏
[07:36:30] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[07:36:30] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : iTel : W6501-F3111
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings
[06:56:27] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[06:56:27] Device Connected!
BootVersion : SPRD3
Boot : INF : iTel : itel W6501
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
can anyone help with fdl file plz
[06:56:17] === DongleManager [Infinity] v1.92 [2/20/2023 12:16:11 PM] ===
Searching...
Card-Reader: Alcorlink USB Smart Card Reader 0
HWID: 00013C6F212B4082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): 237E3C6F
Firmware version: 0154.02
=== Started: 2/20/2023 12:16:12 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication stage error:
Serve
[06:30:41] i need e5885Ls-93a imei change method or file. because in my country its imei ban. kindly help me
[06:23:34] You mean this is working without TP
[06:13:28] You can try recovery your details on infinity-box.Com
[06:12:45] Kindly delete this, your account might be blocked in a jiffy
[06:12:16] Make this https://infinity-box.com/?r=100155
[06:12:16] Smart-card misconfiguration
[06:11:52] cm2 probelem ?? helpp me
[06:11:39] Hi
[06:10:55] hello
[06:08:54] hello
[06:07:29] how to solve plz help me
[05:48:36] Hardware issue bro
[05:18:01] Is it working before flashing?
[04:54:50] Looking for Tecno LE6 testpoint?
[01:06:24] Found 10 files Poco m4 pro
1. xiaomi_eng_rom_Poco_M4_Pro_4G_Fleur_ENG_ROM.fleur_factory_images_FACTORY_FLEUR_0126_11.0
2. xiaomi_evergreen_evergreen_eea_poco_m4_pro_5g_MT6833_26912EB279E1C831A9ACA0715DF67445
3. xiaomi_evergreen_evergreen_ru_poco_m4_pro_5g_MT6833_935815DFF08850EA4C04EC5EB2F51ECA
InfinityBoxTalks 2023-02-19
[22:26:44] Ok
[22:04:43] Yes wifi bluetooth no work
[22:00:28] Turn on Wi-Fi does it works
[22:00:02] good evening who can help me Infinix hot 10 pay bluetooth stopped working
[21:59:35] good evening who can help me Infinix hot 10 pay bluetooth stopped working
[21:59:02] Wi-Fi works ?
[21:40:24] Download backup file for your device http://dl1.infinity-box.com/00/?dir=nvram/
Unpack it
Use preloader file for your model like here https://forum.infinity-box.com/viewtopic.php?t=9483
[21:26:48] I need help tecno bd4h
[21:01:55] Mister
[21:01:48] Am coool
[21:01:40] Y would I.....
[21:01:30] I buy update ....if u got hit up😊🤔👌😏
[21:01:17] Dropped
[21:01:07] Sorry bro if you find offended
[21:00:46] Mr I no about dat......I got up dated if u av another let knw.....am not jjc in dis game
[21:00:01] Check DM
[20:55:20] I have for X665 and X665b
[20:54:49] Hot 20i
[20:50:00] Hot 12 or 12i?
[20:46:13] Kindly share
[20:43:50] Is it locked with EASYBUY(SECURITY PLUGIN)?
[20:42:44] I do
[20:42:31] You can\'t remove it this way without running scripts bro...
[20:40:20] I will do it
[20:40:03] It won\'t remove after this but I can do it
[20:39:37] I can help you remove it if you are in Lagos or if you want online tutor, chat me up with your phone model number.
[20:38:32] Do you own them money or your phone is EasyBuy?
[20:34:00] Try connect with holding vol up Key and check for brom connection
[20:18:19] Hi
[20:11:24] What did you mean by reload my system, you mean reinstall?
[19:57:42] Am having issues flashing x665c
[19:56:45] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[19:56:45] Operation: Authentication [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Authentication...
Account is Ok
Balance: 0
Support: cm2: 2024-02-20;
Telegram Channel: @InfinityBox
Telegram Group: @InfinityBoxTalks
Account: https://infinity-box.com/service/
Operation: Identify Device [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BOTH [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[-] Auto-EMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[-]
[19:42:07] Did you have CM2
[19:36:10] What it you phone model . You want to remove frp?
[19:16:07] Please I need a video tutorial on how to remove frp on spd phones.
[18:47:43] Yes that’s how it does, you all come to think of it “when using free mode to browser frankly on Fb,not all content will load as expected “ so that’s a typical illustration of what is happening.
[18:23:52] Reload your system operating system
[18:07:37] Sir no apizu tool here only cm2 . Com with you problem
[18:05:06] Yes 5 credit
[18:04:35] CAN CM2 UNLOCK NETWORK LOCK NOKIA C1-01
[18:03:27] Remove it don with cm2??
[18:03:17] Please who has APIZU-Mobile password for tecno p904-P05A-N180921v53 it\'s been long I downloaded the file can\'t remember the password I downloaded another one on andriodfilehost the same thing. Please any technician here
[17:52:10] When done removing the easybuy plugin if you restore the nv data it will restore but won’t make calls
[17:51:20] Why is that when you backup mtk Nv ram
[17:32:10] Tecno Bd4h test point
[17:20:08] If your tp not found here, kindly share your motherboard pics here
[17:12:00] Infinix x665c test point??
[17:11:55] SPD Android 12
[17:11:04] Spd
[17:07:46] Please sir I need the test point too
[17:07:17] Not the column
[17:07:06] Click on the image
[16:54:54] Yes available, chipset?
[16:54:26] Chipset?
[16:52:27] Motherboard pics ?
[16:50:32] Chipset ?
[16:50:00] Abi o
[16:48:55] Ok how to do it please
[16:48:19] No any packages needed
[16:44:42] I need video to bypass a042f latest security package disable pro not open after wifi off any ideas video please
[16:32:57] I dnt ..I said I need as well
[16:31:56] If you have solution for it please send it here brother to help as thanks 🙏
[16:29:41] Man
[16:29:38] I need spd
[16:29:33] Yeah .....I av for mtk frm 10 upward
[16:27:42] I will send it here
[16:27:15] This is MTK we were talking about SPD android 12
[16:26:41] Permanent no relock
[16:26:20] Why are you not responding?
[16:22:33] Hnnnn u av.....?
[16:20:12] You mean you have the solution
[16:15:19] I work for all Android version 😂
[16:10:17] Ok man
[16:10:12] 😘👍
[16:09:27] I will drop the update once I get for android 12
[16:08:54] I go need update as well
[16:08:46] 👍👍
[16:08:34] E no go gree bro but guys are busy on its matter
[16:08:02] 😜
[16:08:01] Those anyone have this or X665C test point
[16:08:00] I think I need update
[16:07:48] ☺️
[16:07:23] It updated scorpion not clicking
[16:07:08] That phone na idiot but I go catch that soon
[16:07:02] ☹️🤔
[16:06:32] Infinix hot 20i X665E test point?
[16:06:28] Dat wat am battling wit Oooh baba😭🤣🤪
[16:05:42] Is there a way to remove or disable the this phone plugin coz android 11 solution does not work
[16:03:58] Am even wandering only second Thay Don 😤
[16:02:25] They have started 😁, now fixed ?
[16:02:17] Now you don with you easy buy???
[15:55:55] 😁😁
[15:53:21] But I can run it just 45minute or 1hour u done....no more relock
[15:53:02] Online class will work
[15:52:54] #file s18
[15:52:48] Naaah far
[15:52:32] 🤷♂
[15:52:30] Frm v148 to v91
[15:51:45] Borno
[15:51:38] ??
[15:51:34] Lagos
[15:51:23] Am done thank uu
[15:51:16] Nigeria
[15:51:05] Ur location
[15:51:01] Easy
[15:51:00] Untick that partition and flash after flash completion reflash ony that partition
[15:50:58] Aaah
[15:50:53] 10
[15:50:39] Version wat? ? 10 or 11
[15:50:20] Av done dis vry well it mtk
[15:50:05] I can fix it
[15:49:13] I stop at vbmeta vendor but manage to fix it am dond🤷♂😒🧐😏😊
[15:49:13] Download latest boot pack
[15:48:33] Done wit my s18 I downgrade it
[15:47:48] Device...model
[15:46:44] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[15:46:44] Card found : 56CD2D4B , v0154
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
VER : BP_R2.0.1
LEN : 10B57CAF1 ( 4.18 GiB )
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V025-20211015_1710
VER : BP_R2.0.1
LEN : 10B57CAF1 ( 4.18 GiB )
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V025-20211015_1710
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device
[15:46:37] Infinix X6511B Smart 6 is showing FDL Error
[15:44:51] Model and chip?
[15:31:35] Yes even after I flash they still detect the phone
[15:31:14] Have you flash the phone
[15:30:46] Then flash root and remove their access
[15:30:38] 150$ usdt or btc I promise
[15:30:27] Admin please note that
[15:30:21] Anyone who guide me for this and if it\'s successful I promise 150$
[15:30:03] Yes I have cm2
[15:29:54] Did you have CM2?
[15:29:42] This is my phone is already rooted
[15:29:27] There is one apk called palmpay, I want to change everything of my phone so they won\'t detect my phone again
[15:29:25] Thus is MTK show me SPD
[15:27:32] Not all devices are root able majorly SPD
[15:19:52] Using root access it\'s possible to change every detail of phone so that palmpay can never detect your phone?
They detect
Ip address
Imel
Serial number
Device id
[15:07:25] All this latest security is making someone look like newbie
[15:05:58] So boss tall as more
[15:04:31] For this fdl solution of try this
0_SC7731E
SC7731E_eMMC_2GB_1s
[15:04:10] Have brake all partition and try to flash even without selecting those PMT update and it still fail
[14:59:59] It always no magic see u guys leta👍😘
[14:59:12] Av use dis ideal for a58 (itel a661w since)
[14:58:37] Here it is...boss
[14:58:19] Den make sure u look for same build number in d phone ...look for d same build version firmware dat all...den flash wit it
[14:57:26] Can you please share or you selling
[14:57:13] Just knw d build number of d phone....b4 doing anything
[14:56:46] Dis simple
[14:56:37] I av dis solution as well
[14:56:04] Not yet
[14:56:04] Yes....same tin......same issues same solution
[14:55:21] ??
[14:55:15] That’s what am trying to tell who I tag 🏷
[14:54:39] What’s device issue before flash ?
[14:54:28] No
[14:53:59] Does your trick works for this
[14:52:35] X665c latest security require TP
[14:52:26] Dat is itel s663l new phone by itel
[14:52:01] I av one itel s18 here let see if same tin happened ....I wnt flash dat now
[14:51:25] This is where X6511B stop
[14:51:18] I kip doing my trick till it answer den I select all file and it flash
[14:50:55] Mind you, not all device requires tp
[14:50:35] It take tym wen doing it but I dnt mind
[14:50:12] Dis
[14:50:09] Yes
[14:49:32] It process not just single and simple tin to do at once but I use to manage to do it wit cm2 spd 1.14
[14:49:32] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Open : X6511B-F6318-11.0-OP-V78-20221102.pac
VER : BP_R2.0.1
LEN : 4.18 GiB
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V78-20221102
Reading package ...
Read package finished!
Product Brand : Infinix
Product Device : Infinix-X6511B
Product Model : Infinix X6511B
Product Name : X6511B
Patch Level : RP1A.201005.001
Display ID : X6511B-F6318-11.0-OP-V78-20221102
Ver. Incmt : OP-V78-20221102
Ve
[14:49:23] Found 32 files BE6, search limit is 20 files per server
1. xiaomi_Mi_6_sagit_global_images_V10.0.1.0.OCAMIFH_20180905.0000.00_8.0_global_7ce4be65b4
2. nokia_RM_1019_01068.00023.14295.43001_059W353_6BE66BC4_CustomerNvi_01068.00023.14295.43001_10022_7b0496a925c1d8a35f9554763f6eaa4c.nvi
3. nokia_RM_1019_
[14:48:40] First try identify with default losers
[14:48:29] And it works.....stop at target den phone won\'t come up ryt.....but computer sees port ....it normal with new SD device expecually new security and new device
[14:47:27] If you don’t mind , can you please share ?
[14:46:33] Cm2 can do it as well with trick av been doing dat since last year.....my own way
[14:46:03] Solved?
[14:41:58] Your issue solved?
[14:31:06] Found 2 files X665c
1. infinix_x665c_MT6761_399267CF8F0511F182BDB9551B8D0273
2. infinix_x665c_MT6761_E5F16BC6E94D80DC54B7AF76C9ECB29D
[14:30:52] Kindly share full logs here
[14:30:22] Found 5 files X665b
1. infinix_x665b_test_point.jpg
2. infinix_x665b_032ecf95.preloader_x665b_h6222
3. infinix_X665B_11_X665B_H6222IJKL_R_OP_220330V285_RP1A.200720.011_x665b_h6222
4. infinix_x665b_MT6761_2410179C7B9A04AA63373F2E52B12
[14:29:51] Not Yet
[14:29:38] No
[14:29:14] Found 4 files A032F
1. samsung_a032f_test_point_sc9863a.jpg
2. samsung_sm_a032f_test_point.jpg
3. samsung_sm_a032f_A032F_m168_Natv_userdebug_native_SHARKL3_LK_R11
4. samsung_sm_a032f_sm_a035f_wipe_frp_a032f_a035f_wipe_frp
[14:26:24] And besides we that helps here we’re not paid by team we only do voluntarily if you’re assisted and job ✅ done then you compensate the one who assist you at least this will boost up his moral to assist another day, but there’s no a kind of compensation where do you expect him to get data to assist?, so if you’re assisted on a certain crucial problem kindly compensate for another day sake, IRMC 🤣🤣🤣.
[14:23:15] Done ?
[14:22:42] You’re welcome
[14:21:34] Kg5p
[14:21:18] Keep test point please 🙏
[13:59:34] Infinix hot 20i X665E test point?
[12:46:36] Infinity team can you please update SP unlock on mtk device \'s for new phone\'s we a not able to unlock network on many devices
[12:08:00] Logs ?
[12:07:44] I
[12:06:24] Google or paid at HalabTech
[12:06:05] which one should i short to the ground? 1 or 2?
[12:05:02] who knows?
[12:04:56] nokia c30 test point?
[11:52:38] Need this flash file
👇👇👇
MT6765_motorola Lenovo K12 18 006538.569-36-2 006538.569-36-2 malta_64]...
[11:26:03] kf7j test point
[10:44:03] Available
[10:43:31] X665C is Hot 20i not Hot 12i
[10:40:23] The phone failed to flash and stop at prepare/Update PMT
[10:32:38] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[10:32:38] Admin Pls Help with this Vivo 2015 Y1s
Operation: Identify Device [ v2.42 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BOTH [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM (Android) (COM56)
MODE: PRELOADER PORT
[10:22:39] Change firmware
[10:10:52] Flash rom
[10:10:03] Used BST tool
[10:08:50] password?
[10:08:37] Nokia C1 simcard lock 🔒 remove help
[09:58:13] how to unlock tecno kg5j on cm2
[09:54:24] X670 managed to connect but stopped here
[09:54:12] Found 5 files mobicel neo plus
1. recent_MT6739_Mobicel_Neo_Plus_11_RP1A.200720.011_k522
2. mobicel_neo_plus_k522_MT6739_0AAC7C40885608EA13D8E557824BE23F
3. mobicel_neo_plus_k522_MT6739_904161AE8B881AE6B7F03119E781075B
4. mobicel_neo
[09:50:41] X670 da file
[09:50:33] Hello
[09:27:17] Use Firefly to identify
[09:22:56] Any body?
[09:21:02] Does it work without da file????
[09:20:35] X670 failed to identify even with emi file, does any one have the da file??
[09:20:18] Brom has killed so many devices, while using test point. The latest cm2 has bring about relief. All thanks to infinity v2.42
[09:15:59] Try firefly
[09:06:19] Thank you
[08:20:41] https://www.getdroidtips.com/tecno-camon-18-ch6-da-file/
[08:19:12] 🙏
[08:19:07] Thx
[08:18:37] Google for a da file for the model and retry
[08:15:33] Off All the 279 members online no one can help me on this 👆 🤔🤔
[08:14:27] how to unlock network b310e by cm2
[08:07:39] Found 5 files mobicel neo plus
1. recent_MT6739_Mobicel_Neo_Plus_11_RP1A.200720.011_k522
2. mobicel_neo_plus_k522_MT6739_0AAC7C40885608EA13D8E557824BE23F
3. mobicel_neo_plus_k522_MT6739_904161AE8B881AE6B7F03119E781075B
4. mobicel_neo
[08:02:36] Help want to flash using Cm2
[08:02:15] Camon CH6 Failed to Identify & other tools read it
[07:57:09] I did already, thanks boss
[07:38:20] Nope
[07:37:29] Morning Guys
I need help me pac for A032F
[07:34:57] does safaricom neon Ray pro have TEST POINT??
[07:20:53] supuestamente este grupo sirve para ayudar y no sirve para nada
[02:39:42] How do you fix the jumping from error?????
[02:39:07] Do you have the da file sir?????
[02:10:05] Pls I need Hot 12i flash file x665b and X665c
[02:10:01] Pls I need Hot 12i flash file x665b and X665c
[02:09:52] Pls I need Hot 12i flash file x665b and X665c
[01:39:23] buenas noches firmware de huawei jat-lx3 en formato scrater gracias
InfinityBoxTalks 2023-02-18
[21:31:09] Unmark SLA and connect.
And tell me what result it is
[21:29:38] No
[21:26:28] No error just not connecting. All drivers ok because other phones are working well even with sLA ticked
[21:12:28] Can cm2 Qualcomm support redmi 10c mi account remove
[21:12:12] when I want to release a31 lite it appears asiSLStatus: 2C
Status: Locked! Server unlock required!
Connecting to the server...
Connected
In that...
init failed: bad input data
>>> Error: Operation failed!
>>> Please see the above message for more information!
Reconnect power/cable!
[21:09:26] Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Authentication...
Account is Ok
Balance: 100
Support: cm2: 2024-01-12
[21:05:39] What version is it?
[21:05:26] What is the error?
[21:01:37] Have you gotten any solution because I have one too that doesn\'t work with the testpoint
[21:01:34] Status : Locked! Server unlock required!
[21:00:37] Where in Lagos?
Am also in Lagos around Yaba local government
[20:58:40] Check your settings if you input your password and username
[20:58:03] Back the firmware, remove the system inside the firmware.
Input another China Mobile phone system and flash...
[20:52:30] yes
[20:49:37] I can\'t unlock zte a31 lite I have credits
[20:25:23] where?
[20:10:50] Get factory signed fw and flash
[19:01:42] me2 i face the same error on ci6
[18:31:50] Use tp
[17:54:01] I need itel a33 plus fdl file please
[17:53:20] Flashing ci6
[17:53:13] PLEASE NEED HELP
[17:52:42] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[17:52:42] Reconnect Power/Cable!
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : SlowSparse Fix : True
Setting : Update PMT : True
Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : X6511B-F6318-11.0-OP-V034-20220216.pac
Sending Init Boot ...
Boot sent!
Kick
[17:52:32] I need itel a33 plus fdl file please
[17:47:12] I need your help guys
[17:34:39] Happy to help you man
[17:30:50] Lagos Nigeria
[17:25:04] Hello i have samsung A12 locked witj M-kopa can any one help me with permanent unlock
[17:14:22] Tecno ci6 Da needed
[17:14:09] Need Da please
[17:14:04] I need itel a33 plus fdl file please
[17:13:55] Ci6 can\'t flash even after test point
[17:10:00] Found 20 files poco, search limit is 20 files per server
1. xiaomi_poco_c3_hw_protection_resistor.jpg
2. xiaomi_poco_x4_pro_5g_veux_test_point.jpg
3. xiaomi_eng_rom_Poco_M4_Pro_4G_Fleur_ENG_ROM.fleur_factory_images_FACTORY_FLEUR_0126_11.0
4.
[15:50:34] I look for v40 .pac for Hisense to remove mdm
[14:51:49] Please I need firmware for the company phone anyone please it a company phone thank you
[14:51:49] Admin please help me out with this problem thank you
[14:46:01] How can I change this serial number please
[14:38:23] Mdm
[14:38:16] Alguien que tenga v40 .pac
[14:38:14] Help for rom
[14:22:28] ❤️ pleasure
[14:21:08] DONE✅. Activation: thank you @libimobile for activating my cm2 for 2yrs.
[14:04:24] Please I need firmware for the company phone anyone please it a company phone thank you
[13:47:59] So what can I do now
[13:46:18] A125f solution available
[13:35:42] Samsung a12 mkopa how can help
[13:26:50] you need?
[13:21:35] Need activate
[13:20:24] Yes
[13:18:41] Need cm2 activation anybody
[13:18:27] Hi
[13:12:24] TECNO KE5 TESTPOINT PLS
[12:59:53] https://www.youtube.com/watch?v=dCxkdo903ac
[12:57:52] Pls any other way pls and pls oppo a9 cph1941 reset code
[12:56:03] isp
[12:51:57] Cph1941 oppo reset code tool
[12:51:32] I used memory tool to write nvram and nvdata so that blank imie will be written on x670 but nothing worked. I format the phone so that d imei will show but it is still blank. What do I do?
[12:18:53] the CM2SP2 only not working
[12:13:12] Did you connect your internet server and select correct boot?
[12:12:21] It not their fault bro, it security company, yours is to detect TP and use their tools to unlock them
[12:11:41] Where do you base?
[12:09:51] Testpoints
[12:08:49] Available
[11:58:27] ta 1322 firmare update help
[11:55:08] Nokia 1.4 ...
[11:42:52] Help solve the above problem
[11:41:39] Hi
[11:23:12] Help how to solve Bluetooth, WiFi,, hotspot can\'t open... solution please.... Tecno camon 9....c9 plus
[10:46:49] I flash Redmi Note 8 Eng File (2 files) it automatically restart & restart. What To do??? I want to repair security.
[10:22:53] X665c da file????
[10:10:56] Thanks mate, it worked
[10:09:47] Nothing found for da kf6j
If you will get the file upload it to support with iosFileUploader
[10:07:40] Found 7 files kf7j
1. tecno_KF7j_H696RTAjAk_R_OP_210820V452
2. tecno_KF7j_H696RTAjAk_R_OP_211013V460
3. hb_tecno_kf7j_gionee6582_wt_l_MT6582_3511561AC0AD69A04C66A22C44730B32
4. hb_tecno_kf7j_gionee6582_wt_l_MT6582_501766D5A47F4781F54
[10:04:03] X6511b latest version (091) not pass kick FDL what are the solution please
[10:00:51] Does anyone have realme c33(rmx3624) pin+frp pac file
[09:55:48] Tecno spark kf6j DA file pls
[09:45:06] file smartsan u3
[09:36:34] https://forum.gsmhosting.com/vbb/f296/infinix-x665-repair-imei-done-3132450/
[08:57:02] You have to login from here https://user.infinity-box.com/support/ and click on the circled button after successfully logging in
[08:49:17] I even tried to download some on infinity box test-point image page but after login no download option
[08:47:48] Too bad
[08:47:29] Anyone with infinix x665E TEST POINTS
[08:46:34] So i’d have to keep returning customers phone to them?
[08:46:01] I think the rest point is not out yet
[08:43:57] I don’t, I’m asking if anyone has it
[08:43:12] Do you have the solution sir??
[08:38:45] X665C testpoint
[08:38:01] Not all is not working. Latest security update, blocks the testpoint
[08:37:04] Use dongle manager to get your user name and password
[08:34:19] Infinity box your test-point download page is not working, please fix it thanks
[08:32:17] this is my gmail i want to reset it
[08:09:05] Input user name and password
[08:08:04] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[08:08:04] S/N: 44F794FA v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.38c9
Firmware files: D:\\INFINITYFILES 2021\\SAMSUNG\\MT6765__samsung__SM-A107F__10__QP1A.190711.020.A107FXXU8BUF1__QP1A.190711.020__a10s_by_GSM_iNFO\\
Backup files: C:\\InfinityBox\\CM2MT2\\backup\\
Compact backup files...
Backup files: 53 dirs: 3
Build device list...
Init environment...
Load IDBase v124493 Ok
Check for updates...
Installed v2.38 Latest v2.42 Required card v0154
Infinity Chinese Miracle-2 #CM2MT2 v2.42
Required
[08:07:59] a042f frp
[08:06:35] Go to tab Settings and set login & pass iOS, next restart software
[08:04:23] solution please
[08:03:19] Change installation folder. That\'s all
[07:57:58] Infinity Chinese Miracle-2 CM2MT2 v2.43 [beta]
General:
- Device/Firmware detection method updated
- Boot/Shutdown process updated
User Interface:
- FLASH/META mode selection changed
- DA Protocol selection changed
- Software messages & hints updated
[07:55:17] 🚀🔥 Motorola USA Unlock service source
🚀 T-Mobile / Sprint USA - iPhone All Models including 14, 14 Plus, 14 Pro, 14 Pro Max (Semi-Premium)
🚀 Unlock/repair CPID IMEI, Fold 4/ Flip 4 / Fold 3/ Flip 3 / S22 / S21 FE /
S21 / Fold / S20/ N20 / A426U/ A526U/ A536U / A725M / A736B /
🚀🔥 Huawei ID Remove EMUI 12 All Model
🔥🚀 AT&T USA - All iPhone - 14 Pro Max
[Premium Service] Success Rate: 100% Support [Unpaid / Lost / Stolen / Fraud / Contract] ✅
[07:49:36] It did not work by using its own file pac
I failed the test
[07:48:33] is not
[07:47:23] Try here @FlashFileSearchBot
[07:47:23] need file fg boot
XT2155-6
???
[07:45:22] XT2155-6 moto e20 spd UNISOC
info CM2SP2_helper_v1.05 :
Loading config from server...
1. Power device Off
2. Connect cable
Looking for device...
Device found
PTFN: SPRD U2S Diag (COM14) vid:1782 pid:4D00
Enter Diag Mode[1]...
Reset Interface...
Verify...
Diag Mode On
Reading...
Platform Version: MOCORTM_21A_W21.35.5_Debug
Project Version: qogirl6_pub
BASE Version: 4G_MODEM_21A_W21.35.5
HW Version: qogirl6_modem
09-03-2021 12:39:49
aruba-user 11 RON31.266-20 63893 release-keys
[07:37:10] Guys why no reply
[07:36:09] Latest cm2 needed 2.42
[07:28:49] I need to chat you privately
[07:28:24] Alright how is it going to be?
[07:26:07] Network lock...
[07:23:21] Need to activate this
[07:22:48] Please the smartphone I\'m flashing isn\'t passing this level, I need solution
[07:13:20] All brom
[07:11:14] Itel p55w
[07:11:06] When I installed the new version CM2MT2_v2.42 it just opened the interface logo then closed with out intering the interface when I installed the old version it work
[07:08:18] Infinity related only
[07:04:44] On the phone ? Like why you need xml file ?
[07:04:15] What is the issue
[07:02:38] Help Board Fw, xml to use Factory Mode.
Selected phone model: PPA-L22
Searching Fastboot devices...
Found android device: CNXYD21619203019
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: PPAH-L22
System: PPAH-L22 10.1.1.224(C185E8R3P1)
Android Version: 10
Base Version: PPAH-LGRP2-OVS 10.1.1.224
Custom Version: PPAH-L22-CUST 10.1.1.8(C185)
Preload Version: PPAH-L22-PRELOAD 10.1.1.1(C185R3)
C_Version: C185
D_Version: D000
Read Info done.
[07:01:20] X665c include????
[07:00:14] Any help????
[07:00:05] Or flash without test point
[06:59:07] X665c da file
[06:48:02] Gionee m7 mtk da file or test point please
[06:42:37] After waiting for long time struggling with brom devices and blocked testpoint, finally the solution is out 💯.
[06:39:45] Help please
[06:39:38] Infinity cm2 mtk2 very slow In operation every other module working well on my PC... What can I do to resolve this problem
[05:07:11] Need flash file also
[05:06:54] TA 1174 SPREAD RUM HOW TO FLASH WITH CM2 ?? OR BEST 2
[05:02:25] Tecno spark kf6j DA file pls
[03:36:11] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Open : X6511B-F6318-11.0-OP-V78-20221102.pac
VER : BP_R2.0.1
LEN : 4.18 GiB
CPU : s9863a1h10
VER : X6511B-F6318-11.0-OP-V78-20221102
Reading package ...
Read package finished!
Product Brand : Infinix
Product Device : Infinix-X6511B
Product Model : Infinix X6511B
Product Name : X6511B
Patch Level : RP1A.201005.001
Display ID : X6511B-F6318-11.0-OP-V78-20221102
Ver. Incmt : OP-V78-20221102
Ver. CodeName :
[03:32:20] Admin kindly respond with a solution to this, it has become a usual problem, or perhaps please let us know if SPD and Qualcomm programme has been \"discontinued\" thanks
[00:56:24] I phone 8 bypass update
InfinityBoxTalks 2023-02-17
[23:07:38] Tracfone server on, send imei
[23:07:07] Unlock motorola
[23:06:18] Thanks
[22:22:12] Admin I want to know when cm2sp2 update coming every time say soon coming please answer
[22:19:09] Which phone
[22:18:54] Model
[21:59:03] Hi
[20:19:06] Alcohol 5033xr unlock
[19:58:38] I have failed two of this same model with tp
[19:33:51] It may takes time.
Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[19:25:50] Are you sure?
[19:24:49] https://infinity-best.com/
[19:24:17] Make this https://infinity-box.com/?r=100155
[19:18:40] Use this Infinity Tool https://infinity-box.com/news/?r=4289
[19:16:30] OK boss.
[19:16:13] all servers online 24/7/365
don\'t ask again
[19:15:54] Sp unlock
[19:15:45] Nokia c10.
[19:15:29] what servers?
[19:14:43] Servers on?
[19:05:03] Nothing found for Smartsan u2
If you will get the file upload it to support with iosFileUploader
[19:04:52] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[18:45:18] Help
[18:44:23] I should shat my mouth thanks
[18:42:28] Gionee f6 diag mode code anyone here can help I want to fix imei
[18:37:19] I this flash file
Smartsan u2 pro
[18:35:43] Shat
[18:35:06] Send here Logo for you answer
[18:25:19] I already check
[18:25:11] No dont have solution in unlocktool
[18:07:26] Select correct cup and model typ
[18:00:55] Unlock tool not here you get?
[18:00:36] Yes.
[17:57:01] No used unlocktool.net
[17:56:10] Can ido nokia c1 2nd edition factory reset with cm2 🙄
[17:51:42] 👌Perfect.
[17:49:09] Thank you sir it works
[17:47:35] Alright boss
[17:46:40] Select this one.
[17:46:30] 0_SC7731E_BASE :
SC7731E_eMMC_2GB_1S
[17:43:16] Nothing found for a631w
If you will get the file upload it to support with iosFileUploader
[17:39:57] A631w fdl please
[17:31:46] Alguien que me ayude por favor? Como puedo solucionar ese problema? Ya hice mi queja en el soporte pero nada que ayudan.
[16:55:55] Hello, please help, from where may I download the Infinity Best NK2 to update the bios of Nokia 3310 2017? Thanks a lot!
[16:54:19] Reboot pc, reinstal drivers
[16:52:46] realmi 8
[16:40:28] Found 8 files 3.1 plus
1. recent_MT6580_A32_A32_8.1.0_A53K3B1A_ZYU_T64_O_A32_APLUS_HB22_B1258_ER381A_M03_20220822_1757_O11019_A32
2. nokia_3.1_plus_roo_MT6765_73D95FD59FE8EA29E9BED1DAC32A9F57
3. nokia_3.1_plus_roo_MT6765_848E983B5C6A39CA190DFBE69F138FA8
4.
[16:40:19] Nothing found for ta1115
If you will get the file upload it to support with iosFileUploader
[16:22:51] Time is over
[16:22:28] Tommorrow now am not in my offoce
[16:09:16] It okay send you videos here with clear picture . Even know am working on that model
[16:08:06] realmi 8
[16:07:39] Tecno kg5j got new update, previous test point doesnt work
[16:05:31] You people you are making mistake then you are focusing team please send you videos here for help
[16:03:14] Then send here you new security
[15:42:36] Also facin the same problem its been morethan 6 hours it is still executin
[15:36:08] So far it\'s just Execting, it\'s been 2h so far nothing
[15:33:22] I can hear the flash of the phone camera and it does not turn on
[15:32:13] So far it\'s just Execting, it\'s been 2 hours so far nothing
[14:55:03] Funny?
[14:34:21] Let me do
[14:33:39] Restart pc and retry with only cm2 dongle plugged to pc and also make sure that the card is well inserted into the card reader
[14:32:17] Yes I change port also
[14:31:16] Found 3 files kg5k
1. tecno_KG5k_F062_11.0_GL_V034_20220214
2. tecno_KG5k_F062_11.0_GL_V040_20220328
3. tecno_TECNO_SPARK_8C_KG5k_F062_11.0_GL_V62_20220715
[14:30:56] Make sure that you only plugged infinity cm2 dongle to pc
[14:28:49] Tecno kg5k
[14:21:21] Now is showing this error
[14:16:24] Almost an hour now still calculating
[14:11:46] Model?
[14:11:12] Type: Infinity-Box/Dongle [CM2]
S/N: D1F235E2
Username: 00D1F235E2
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0154; Expired: 12-Jan-2023
Your [CM2] support period is expired.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years
How to check support period - https://infinity-box.com/doc/?r=17
[14:11:10] Pls what is the problem for My SPD
[13:46:19] Check if dongle is connected properly
[13:45:24] Report pics ?
[13:32:57] The same thing has been happening since yesterday and I am still waiting.
[13:30:48] 30 minutes now stil executing??????
[12:59:29] From 30 minutes still not complete admin any solution plz
[12:54:28] When I installed the new version CM2MT2_v2.42 it just opened the interface logo then closed with out intering the interface when I installed the old version it work
[12:46:36] Ok, I\'ll try that, thanks
[12:44:47] Anyone help me
[12:43:24] May cm2 giving error
[12:43:13] Good afternoon
[12:27:20] Download another file it will be ok
[12:17:36] Itel P682L after connecting shows error... Solution please 🙏
[12:15:17] Infinix X6816 Hot 12 Play writes dm-verify corruption after full flash with it\'s own file i read previously, Help Please
[12:12:38] 😂😂😂
[12:10:36] Done
[12:10:22] Sir please help me yesterday submit 40 units Spd unlock SLS : 1/2/3 rev 2 and still cant unlock always CM II return have to wait 10-15 min
[11:55:37] Please help
[11:50:26] Old security
[11:48:59] A661W fdl
[11:48:45] Itel A58 fdl file needed
[11:40:04] New security doesnt work, thanks
[11:39:14] Please send picture of connection, video is not clear seen
[11:35:21] Can u send picture i cant see where twisser connected
[11:32:09] https://youtu.be/u6c5dwW0ulk
[11:28:42] Help
[11:28:31] Kg5j new security test point
[11:23:41] renew your 1 year activation dongle
[11:23:19] Hie I am trying to unlock nokiaC10 I am getting a message wait for10 - 15 mins since morng is our servers up?
[11:16:28] Kindly check your inbox
[11:16:15] I don\'t know how to reach them
[11:11:45] Check what
[11:11:16] Ok, yes available check dm
[11:09:59] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r
[11:09:59] I want to renew it
[11:08:52] Type: Infinity-Box/Dongle [CM2]
S/N: 3DD0CCA6
Username: 003DD0CCA6
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0152; Expired: 21-Feb-2022
Your [CM2] support period is expired.
To use latest software updates please renew support.
[11:08:00] Cm2mt2 and execute operation
[11:04:52] 3DD0CCA6
[11:01:01] Tacno BD4h frp cm2
[10:51:26] Infinity cm2 mtk2 very slow In operation every other module working well on my PC... What can I do to resolve this problem
[10:51:10] Ok
[10:46:16] Your sn?
[10:44:46] Please i want to update my cm2 dongle to be working new phones
[10:42:59] Please i want to update my cm2 dongle to be working new phones
[10:34:12] Motherboard pics?
[10:33:59] Cm2mt2 and execute operation
[10:15:42] Yess use cm2
[10:10:15] Test point bro
[10:02:18] Any solution team
[09:55:02] Tecno kg5j frp remove mtk solution
[09:45:51] Couldn\'t download after login sir
[09:35:21] Found 27 files azumi, search limit is 20 files per server
1. Azumi_Azumi_IRO_A6Q_MT6580_20180321_7.0.s6061b_cq_azumi_we.alps_mp_n0.mp2_W17.03
2. Azumi_MT6739_EMMC_AZUMI_AzumiV51_2022_08_30_10_46
3. Azumi_MT6570_Azumi_Azumi_KIREI_A5_D_6.0_AZUMI_KIREI_A5_D_SA_V05_MRA58K_KIREI_A5_D
4.
[09:35:03] Nothing found for AZUMI KIREI A5D
If you will get the file upload it to support with iosFileUploader
[09:14:56] Tecno BF7 test point please I need help with it.
[08:58:55] huawei lua-l01test point someone help
[08:51:39] Admin whats to be done to solve this problem after getting over KICK FDL ERROR
[08:50:35] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : X6511B-F6318-11.0-OP-V78-20221102.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
[08:36:41] I need solution please
[08:25:09] doesn\'t work
[07:56:14] Dongle manager
[07:34:59] Please how do I root tecno ci6
[07:13:52] Does it mean that no one is seeing my messages here?
[07:11:17] Sim lock taking long to complete the server
[07:10:00] I tried to get it from Infinix site but after login, no download option
[07:08:26] Someone should help please
[07:08:09] https://support.halabtech.com/index.php?a=downloads&b=file&id=620648
need help with link
[07:07:21] Bd4h working test-point please
[07:06:04] non infinity related msg sure will be disappear
[07:05:51] try best 2
[07:03:12] My my message is always disappear in here
[06:58:53] iPhone 13 Pro max ITunes disabled solution
[06:56:12] Help remove password Nokia TA 1284
[06:50:56] Found 1 file itel A661w
1. itel_Itel_A661W_V008_220216_11_SPD
[06:40:53] iremove pro chack support
[06:40:06] Iremoval tools is opening in my window 10 pc
[06:39:38] iPad 2 version 9.3.5 iCloud any solution
[06:38:51] 👍
[06:31:25] I need itel a661w firmware download link
[05:57:10] Thank you
[04:29:37] Use download manager to get username and password and use that
[02:56:41] How do I download test-point image please????
[02:55:45] After one hour same result please help me
[02:39:36] Connected sir
[02:18:39] Sir after loged in I couldn\'t see any download option please help
[02:17:29] Help with Spd unlock SLS : 1/2/3 rev 2 server after submited many devices always return wait 10-15 minutes
[01:55:55] GIONEE F6 dauglass mode code ?
[01:00:29] Found 10 files Poco m4 pro
1. xiaomi_eng_rom_Poco_M4_Pro_4G_Fleur_ENG_ROM.fleur_factory_images_FACTORY_FLEUR_0126_11.0
2. xiaomi_evergreen_evergreen_eea_poco_m4_pro_5g_MT6833_26912EB279E1C831A9ACA0715DF67445
3. xiaomi_evergreen_evergreen_ru_poco_m4_pro_5g_MT6833_935815DFF08850EA4C04EC5EB2F51ECA
InfinityBoxTalks 2023-02-16
[23:40:34] Solved?
[22:56:23] AMT is dead?
[21:59:32] I face it too but I solved it last
[21:46:51] I mean send password please
[21:46:42] Password?
[21:35:47] Connet PC to internet
[21:08:06] https://infinity-box.com/?r=100179
[21:07:19] https://user.infinity-box.com/
[21:06:44] Anyone to help me solve this issue
[21:06:23] Itel p38 p661w stops on preparing target when trying to flash
[21:04:57] Login as in?
[20:51:44] Help me with login
[20:51:39] Follow this
[20:49:35] Found 7 files CE7j
1. recent_MT6768_TECNO_MOBILE_LIMITED_TECNO_CE7j_10_CE7j_H693NOQ_Q_OP_201214V204_QP1A.190711.020_ce7j_h693
2. tecno_CE7j_H693NOQ_R_OP_211015V382
3. tecno_CE7j_H693NOQ_Q_OP_210915V293
4. tecno_CE7j_H693NOQ_Q_OP_2105
[20:49:05] Admin please any solution to X6511B KICK FDL ERROR while flashing with CM2SP2 all build in FDL and all FDL provided in the group does not work
[20:39:50] EMI: Init EMI by PRELOADER
EMI: MT6752 preloader_k69v1_64.bin with 25 memory type(s) supported
1. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 512.00 MB
2. eMMC DDR3 ID: 90014A68423861503E Ven: Hynix | Dev: hB8aP> RAM: 3.00 GB
3. eMMC LP_DDR4X ID: 90014A68433861503E Ven: Hynix | Dev: hC8aP> RAM: 4.00 GB
4. eMMC LP_DDR4X ID: 90014A684339615033 Ven: Hynix | Dev: hC9aP3 RAM: 4.00 GB
5. eMMC LP_DDR4X ID: 150100445036444142 Ven: Samsung | Dev: DP6DAB RAM
[20:39:50] Operation: Write Flash [ v2.41 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Wait...
[+] Update PMT [re-Part]
[-] Checksum Verify
[+] Safe Erase [Upgrade]
[+] Check compatibility
[+] Backup
[-] UserData Safe
[-] FLASH ERASE
Files: 34
[FL]: C:\\Users\\azeem\\Downloads\\Compressed\\FRL-L22 10.1.1.165(C185E10R8P1)\\__0707--()_180821210520\\
Set: preloader_k69v1_64.bin
Set: log.bin
Set: rrecord.bin
Set: cache.bin
Set: lk.bin
Set: spmfw.bin
Set: scp1.bin
Set: sspm_1.bin
Set: tee1.bin
[20:39:47] what the problem stuck here
[20:34:37] my QLM when i select flash file to flash huawei it says,
no item match your searchs.
how to fix it
[20:17:59] I need this firmware
[20:03:48] Plz I need this file:
https://support.halabtech.com/index.php?a=downloads&b=file&id=335247&__cf_chl_tk=6zbQO2qVlZG8cLdzDmoEIM72FSB3jLI7yVPEwlRR2ao-1675743723-0-gaNycGzND1A
[19:58:03] Try with default loader selection
[19:57:27] Probably you re right, but to get any advice I have to know the problem
[19:29:58] Thankyou
[19:26:13] Check bro
[19:25:49] 👆
[19:25:31] Need to renew licence bro
[19:24:59] 👆
[19:24:20] Yes available
[19:12:59] Very simple
[19:06:31] Spd 6820a operations possible?
[19:04:02] server functions work for active support
[19:03:41] Your dongle support period is expired.
Send your dongle S/N to any seller and oder [CM2] support renew for 1 or 2 years
Sellers - https://infinity-box.com/buy/
How to check support date - https://infinity-box.com/doc/?r=17
[19:03:05] send here text
[18:49:49] This message is when I use cm2sp2
But on cm2mt2 is ok
[18:47:06] What is the problem
[18:40:48] Yes the same to you
[18:39:37] My cm2mt2 working good. But cm2sp2 complaining wrong username and password
[18:38:54] I am facing this too
[18:38:07] Please help
[18:37:06] I want to know if i really need activate. My account status is active. But firmwares version 0154 expired
[18:34:24] Send sw log text.
How to get text see here https://forum.infinity-box.com/viewtopic.php?t=1828
[18:34:12] Please see here https://infinity-box.com/buy/
[18:24:14] Support period expired. I need someone to activate for me please
[17:31:00] Not have any link on Google
[17:29:18] All boot not working
[17:29:04] Any one tried to boot Tecno bf7
[17:24:50] What is the boot for susan y4 chinese
[17:13:59] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r
[17:13:59] Please who can help me. I want to renew my Cm2..
How is the credit calculated? I mean 1credit is how many naire or dollar. And can one buy credit with usdt?
[17:09:42] Anyone have this file link
[17:04:46] Logs ?
[16:57:52] Hello, from where may I download the Infiniti -box in a right version to flash my Nokia 3310 - 2017?
[16:33:07] [FL]: Pre-Erase
Erase: 0x0000000000000000 0x0000000009B00000
Erase: 0x000000000DB00000 0x0000000105500000
Erase: 0x0000000117000000 0x0000000014D00000
Erase: 0x000000012C000000 0x0000000016280000
Erase: 0x0000000144280000 0x00000000C4580000
[FL]: RePartition
[FL]: RePartition Ok
[FL]: Flashing now...
Write: PRELOADER
Update bootloader backup copy...Ok
Write: MD1IMG
Write: SPMFW
Write: SCP1
Write: SCP2
Write: SSPM_1
Write: SSPM_2
Write: LK
Write: LK2
Write: BOOT
Write: LOGO
Write: DTBO
Write: TEE1
Write:
[16:13:36] Stop blabbering here,if you follow normal protocol as you’ve been told it will work .
[16:12:38] Nothing found for coolpad mega 5s
If you will get the file upload it to support with iosFileUploader
[16:12:14] Service available but high rate
[16:01:57] What it\'s wrong with it\'?
[15:59:29] coolpad mega 5A
[15:57:50] What is the error ?
[15:52:42] coolpad mega 5s
[15:51:52] nothing helped..unlocked by unlocktool..
[SPRD] ERASE FRP Selected Model : Samsung A03 [Binary U2]
Code Name : SM-A035F_U2
Operation : Erase FRP [1]
Authenticating... OK
Retrieving data... OK [958,07 KiB]
Hold POWER OFF PHONE, Test-Point Connect USB cable!
Waiting for device... COM26
Protocol : SPRD3
Sending FDL1... OK [57,95 KiB]
Boot ver: Spreadtrum Boot Block version 1.1
Sending FDL2... OK [1,92 MiB]
Reading DEVINFO... OK
Model Name : a03
Android Version : 12
Security Patch : 2022-07-01
[15:51:48] coolpad mega 5s firmware need
[15:50:51] iPhone 13 pro unlocked icloud ! How help me ?
[15:50:25] Select local Sala and hold volume up
[15:43:01] Hello please help me with samsung a1os frp
[15:33:18] 😂
[15:30:14] Chimera is the most useless tool anybody can buy
[15:24:08] Flash full and fix imei
[15:22:04] No
[15:21:41] Not sure maybe the server is still active
[15:20:56] Motherboard pics?
[15:20:33] cm2
[15:20:05] With cm2 or any tool?
[15:18:00] a125u unlock supported?
[15:15:57] Ok your feedback will be highly appreciated
[15:15:26] Thank u
[15:15:24] Ok pls trying again and get feedback
[15:13:41] Now do this, select tecno Raphael v2, and manually add a preloader file, check ✔ on local sla and retry
[15:13:06] With preloader??
[15:10:49] Yes pls but failed here
[15:07:55] When use tp, brom detected ?
[15:06:21] Pls need guide how to flash dm verify failed TECHNO KG5j with test point
[15:05:46] You use built in loader not work?
[15:05:22] https://forum.infinity-box.com/viewtopic.php?t=12623
[15:05:12] A512w fdl
[15:03:21] Check here
[15:01:35] Device clean?
[14:56:37] What do you intend to do ?
[14:56:14] 👆
[14:55:18] Check on google bro
[14:44:33] Model ?
[14:43:01] So your solution?
[14:42:15] Found 10 files UMIDIGI A11
1. recent_MT6765_HXY_A11_11_UMIDIGI_A11_V1.0_20210714_RP1A.200720.011_A11
2. Umi_Umidigi_UMIDIGI_A11S_V1_0_20220426_Oman653
3. Umi_Umidigi_UMIDIGI_A11S_V1_0_20220107
4. umidigi_hxy_a11_g2139dpr_v1_gb_ym_a11
[14:41:36] Sure
[14:38:42] Restore nv data first bro
[14:38:08] Motherboard pics and model number?
[14:37:31] Permanent solution available via server
[14:36:13] You have isp tools ?
[14:30:54] Model?
[14:25:56] Am already fixing it.....
[14:25:19] Used dongle manger and fixed
[14:22:30] Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BOTH [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM85)
MODE: PRELOADER PORT; PORT: 85
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init...