Infinity CM2, Infinity [BEST] @InfinityBoxTalks 19-Apr-2024 [page 24]

[page-1] [page-2] [page-3] [page-4] [page-5] [page-6] [page-7] [page-8] [page-9] [page-10] [page-11] [page-12] [page-13] [page-14] [page-15] [page-16] [page-17] [page-18] [page-19] [page-20] [page-21] [page-22] [page-23] [page-24] [page-25] [page-26] [page-27] [page-28] [page-29] [page-30] [page-31] [page-32] [page-33] [page-34] [page-35] [page-36] [page-37] [page-38] [page-39] [page-40] [page-41] [page-42] [page-43] [page-44] [page-45] [page-46] [page-47] [page-48] [page-49] [page-50] [page-51] [page-52] [page-53] [page-54]

InfinityBoxTalks 2022-12-04

[16:32:13] Virtually all that they are requesting for
[16:31:45] What test-points do you have?
post here list
[16:30:38] Make this https://infinity-box.com/?r=100155
[16:30:18] if it freez it may be drivers issue or maybe you have usb drivers in system after sharing tool.
fix both!

also you may try this https://infinity-box.com/?r=100202
[16:29:05] cpu type?
[16:29:01] If magisk can not root it, use chimera, if you don\'t have it, buy it.
[16:27:30] Ok
[16:26:54] find schematic and see there D0 pin
[16:26:51] Try again
[16:26:21] I don\'t have chimera. Any other tool pls
[16:25:38] Use chimera
[16:25:18] Available but not free
[16:25:04] Pls house infinix X657 root? After rooting with magisk it hangs on logo. Pls help
[16:23:39] Available not free
[16:20:11] Sigmakey
[16:18:11] Please test point Tecno BD4j
[16:11:31] Make this https://infinity-box.com/?r=100155
[16:08:37] run CM2MT2.exe but not CM2MTK
[16:07:54] at first Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[16:03:01] Found 4 files 2163d
1. itel_it2163D_G1808_EnFrSwHaPoAr_ZA_MTN_20190828
2. itel_it2163D_G1808_EnFrSwHaPoAr_UG_AIRTEL_L_20210713
3. itel_it2163D_G1808_EnFrSwHaPoAr_TZ_TIGO_20190508
4. itel_it2163D_G1808_EnFrPoZuXhAf_ZA_VODACOM_20210720
[16:02:24] What is the problem with the phone?
Is it stuck on boot-logo?
[15:50:10] test-point for y12 is here http://dl1.infinity-box.com/00/?dir=test-point/
[15:47:23] P661w itel
[15:46:19] I will be grateful sir
[15:40:39] I have vivo Y12 but can\'t format due to new security 😪😪
[14:41:37] Tecno spark 7 kf6i MDM Removed

By TEST point

Contact :

@Wilsonunlockservices
[14:39:04] Thanks, I will chat with you for needed guidance
[14:37:54] Okay boss
[14:37:24] Install the Magisk program on the phone and patch the file, then root it
[14:36:18] Using the dongle, extract the boot file from the BL file, then create a root file using the EFT dongle.
[14:34:16] Hello my friend, do you have a EFT dongle?
[14:14:41] admin
BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0xFF|0x01
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Enabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\\InfinityBox\\CM2MT2\\boot\\0_base\\BASE_v2112\\MTK_AllInOne_DA.bin
AGENT : [826c605b] C:\\FILES\\MT6572TECNOECNO-Y24.2721A3-KK-170915V1749Htech72_we_72_rlk_kk\\preloader_ratech72_we_72_rlk_kk.bin
AGENT : [826c605b] C:\\FILES\\MT6572TECNOECNO-Y24.2721A3-KK-170915V1749Htech72_we_72_rlk_kk\\preloader_ratec
[13:58:28] yes i flashed with different files same error
[13:38:22] I need itel 2163d flash file
[12:56:33] I need help for ke5 test point
[12:53:29] what could be the reason for that in case you upload a scatter file
[12:51:36] Okay thanks
[12:50:59] Not support root
[12:50:07] Software information
[12:42:01] my box
[12:26:58] network unlock
[12:26:34] Hello dear help me how i can unlock ZTE OPTUS P650 PRO
[11:59:19] Please help me to root this phone
[11:32:26] 👆
[11:31:50] Waiting
[11:27:49] Send front and back motherboard pics
[11:27:21] Yes
[11:26:55] Motherboard pics?
[11:25:56] Needed
[11:25:12] Available?
[11:24:54] Please solution is stuck here
[10:54:44] Kf7j test point
[10:49:45] hi
frimware nokia rm-1114
v10.02.11
🙁
[10:27:17] https://infinity-box.com/?r=34
[10:27:17] Download the latest dongle manager and click on “report and fix” problem will be solved
[10:00:48] Send device clear motherboard pics here
[09:48:52] Available
[09:47:25] I can help
[09:40:47] X6819 test point pls
[09:24:46] tecno y2 stuck on boot logo
[09:24:29] BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0xFF|0x01
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Enabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\\InfinityBox\\CM2MT2\\boot\\0_base\\BASE_v2112\\MTK_AllInOne_DA.bin
AGENT : [826c605b] C:\\FILES\\MT6572__TECNO__ECNO-Y2__4.2__721A3-KK-170915V17__49H__tech72_we_72_rlk_kk\\preloader_ratech72_we_72_rlk_kk.bin
AGENT : [826c605b] C:\\FILES\\MT6572__TECNO__ECNO-Y2__4.2__721A3-KK-170915V17__49H__tech72_we_72_rlk_
[09:24:29] what causes this error=== [30-11-2022 11:59:47 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===
S/N: 601556E4 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v312457 Ok

Update configuration...
Socket Error # 11001
Host not found.
Finished

Load IDBase v312457 Ok
EMIBase: C:\\FILES\\MT6572__TECNO__ECNO-Y2__4.2__721A3-KK-170915V17__49H__tech72_we_72_rlk_kk\\preloader_ratech72_we_72_rlk_kk.bin
EMI: MT6572 preloader_ratech72_we_72_rlk_kk.bin with 5 memory type(s) supported
EMI[00] : eM
[09:21:33] Grant permission to system uninstall app
[09:02:51] Kk
[09:00:23] Thanks I will follow the above process and give feedback. But that will be tomorrow
[08:46:38] It can delete
[08:46:23] Guy wrong rooting
[08:45:36] I used memory tool to flash patched boot and I gained root
[08:44:24] zte z835 network unlock.help anyone
[08:43:39] U use command
[08:31:00] Device is rooted with magisk
[08:25:50] Guy ... Root it well
[08:14:40] Cm2mt2
[08:14:21] Ci6 :frp
[08:11:36] available
[08:03:54] Ready???
[07:49:10] Excuse me, I not done nothing will happen to device 👌
[07:48:37] Yes possible though but 💰
[07:47:32] Data important sir. Need proof done result 🙏
[07:46:58] Yes possible ✅💯👌
[07:46:19] Besides test it and tell result
[07:44:56] Support expire reason
[07:43:01] I can root
[07:33:48] All cm2 working. Only spd2 ask this msg
When identify mt2 working in 2.37 with user and pass working
Need info time last active
How me work in tool 7 monthe free
1 year. Active in this day.
[07:31:51] need firmware
[07:31:45] SW : Redmi/vida_in/vida:11/RP1A.200720.011/V13.0.5.0.RGDINXM:user/release-keys
Product Brand: Redmi
Product Device: vida
Product Model: vida
Product Name: vida_in
Patch Level: RP1A.200720.011
Display ID: CUST_vida
SW Version: V13.0.5.0.RGDINXM
Ver. CodeName: REL
Ver. Release: 11
Sec. Patch: 2022-04-01
Build Time: 25.04.2022
CPU : arm64-v8a,armeabi-v7a,armeabi
CPU : armeabi-v7a,armeabi
CPU : arm64-v8a
Product Info: vida
SW : vida-user 11 RP1A.200720.011 V13.0.5.0.RGDINXM release-keys
Product Manfct: Xiaomi
P
[07:25:46] Contact @Abdulwasii_remote_tech_service for more info .
[07:25:00] https://dl3.infinity-box.com/00/pub/?dir=/software/
[07:24:04] Support Expired sir, needs to renew, contact @Abdulwasii_remote_tech_service for more info.
[07:22:10] I have Tecno Kg7h rooted with nagisk but com.Scorpio.securitycom failed to uninstall with all efforts
If you can help I will appreciate
[07:14:21] KG WHAT?
[07:13:52] Yes thanks. Only oppo realme safe erase?
[07:13:24] No for infinix
[06:49:19] Use Maui meta. For those that don\'t enter meta mode cm2 latest version or use aftersale transfusion
[06:47:53] Can be done if you can root the device with magisk
[06:41:00] Infinix x663 mdm permanent solution
[06:19:14] Safe erase format only for oppo / realme device? Infinix hot 11 play pin passcode is that support for safe erase without data lost sir? 🙏
[05:54:57] How much
[05:54:40] How much does it cost
[05:48:24] Ok sir
[05:13:23] https://t.me/joinchat/Bg_a-dnA8pQyNjc0
[03:24:19] Send a direct message to this poster sir
[03:23:24] Real model name ?

InfinityBoxTalks 2022-12-03

[23:25:00] Please give setup infinity box MTK2
[22:58:56] J\'ai besoin d\'aide
[22:58:51] Inbox moi
[21:03:38] Hello Admin, let me sell most of the testpoint for you.
Are you willing?
You will give me supports?
[20:55:55] Reset password or e-mail here https://infinity-box.com/service/\r
\r
Click here https://www.youtube.com/watch?v=KogYDEkg-O8
[20:55:55] Server Error : Access denied: ^^Username 003xxxxx
Wrong username or password
Product 908 declined
Support expired 2022-03-24 please renew it
[20:52:58] Wrong password or username expired 23-12-2022 Cant access only in spd2
[20:52:56] Available
[20:50:11] Unlock bootloader but remove mi acc
Any another tool
[19:49:30] Any solution for redmi 10a mi account permanent remove. Mtk phone
[18:58:37] check here http://dl1.infinity-box.com/00/?dir=test-point/
if not exist - try google and send your image here for all users
[18:58:12] Make this https://infinity-box.com/?r=100155
[18:56:10] Make it now:

- Go to c:/InfinityBox/BEST/ folder
- Delete License_best_xxxxxxxx.ask file
- Delete License_best_xxxxxxxx.dat file
- Run BEST.exe
- Enter GOOD WORKING e-mail address and you will get licence file to your mailbox
[18:55:26] Ok
[18:54:55] Found 1 file x689f
1. infinix_X689F_H6510ABCDEF_R_OP_211028V420

[18:53:21] select another loader from list and try again
[18:52:16] make once again:

- Go to c:/InfinityBox/BEST/ folder
- Delete License_best_xxxxxxxx.ask file
- Delete License_best_xxxxxxxx.dat file
- Run BEST.exe
- Enter GOOD WORKING e-mail address and you will get licence file to your mailbox
[18:47:26] Wrong password or expired support
check both
[18:46:11] x6816 test point help 🙏
[18:44:00] exe ver?
[18:41:38] Cm2 sp2
[18:34:28] Hi
https://infinity-box.com/support/
[18:32:18] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199

and send here your test point
[18:29:30] what is the cpu type?
[18:29:04] easy
here https://infinity-box.com/service/
[18:26:55] if you can not connect by ordinary way test-point is here http://dl1.infinity-box.com/00/?dir=test-point/
[18:14:31] Available
[18:10:52] Model?
[18:10:26] not sure
you can try
[18:09:41] .
[18:05:26] read https://infinity-box.com/?r=100103

see last option and send file here
[18:04:49] any sharing software install my pc?
[18:04:13] usb shariing sir
[18:03:05] Sharing tools are not virus but usb sharing tools
What confirmation do you need?
[18:00:35] Please confirm rhanks
[18:00:25] Sharing tool not insttal?
[17:59:15] Imei repair?
[17:57:24] test-point is here http://dl1.infinity-box.com/00/?dir=test-point/
[17:55:56] God Did & God Bless
[17:55:41] Thank you very much
[17:55:24] what repair?
[17:51:46] repair possible?
[17:51:39] done phone alive❤️
[17:48:07] now preloader file!
like here but preloader for your model https://forum.infinity-box.com/viewtopic.php?t=9483
[17:45:00] That\'s the log
[17:44:44] PTFN: MediaTek USB Port_V1632 (COM8)
MODE: BOOTROM
PORT: 8
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]

BROM: MEID: FE446BE60CC906B709B89DAA85EDC7F5
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 8BCE3307D74010B2FE8409EC6ADD70F1C372554D4F49C8DE980D785820F8E6DD
BROM: SLA: Local Auth
BROM: SLA
[17:43:54] you may try to keep TP less or more long time
Also you may try with another loader selection
try it pls
[17:42:48] +6 months support to your S/N or to any other S/N against 100% working solution (+ files, if need)
[17:42:34] Yes sir
[17:42:05] with TP?
[17:41:08] But the normal platform doesn\'t connect completely
[17:40:18] I have the test point already
[17:40:16] check manual and send here file with running processes
[17:39:27] Solution?
[17:38:57] Tecno CI6
[17:38:44] model?
[17:38:34] Please I can\'t backup or flash this phone
[17:38:05] PTFN: MediaTek USB Port_V1632 (COM8)
MODE: BOOTROM
PORT: 8
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]

BROM: MEID: FE446BE60CC906B709B89DAA85EDC7F5
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 8BCE3307D74010B2FE8409EC6ADD70F1C372554D4F49C8DE980D785820F8E6DD
BROM: SLA: Local Auth
BROM: SLA
[17:35:19] Then install windows for solution
[17:35:17] you must stop sharing tools

If you do not know what to do make this https://infinity-box.com/?r=100103
[17:34:11] pc reboot still same exe off
[17:34:00] remove it but same
[17:30:57] it\'s something with your PC after windows update
check https://www.google.com/search?q=0x0c000007b
[17:30:51] spark 8c imei repair
[17:29:30] you must close sharing tools
[17:29:12] make META mode option checked

Also you may try to run this https://infinity-box.com/?r=100202
[17:27:47] i try 2 different pc same issue exe off
[17:27:21] already try but exe close
[17:24:58] With test point?
[17:20:34] use MemTool to write files/partitions you want https://forum.infinity-box.com/viewtopic.php?t=10633
[17:17:48] Normal condition logs
[17:17:37] Operation: Repair Security [ v2.38b6 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
MODE: PRELOADER PORT
PORT: 7
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM: Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE:
[17:11:37] Cm2tool not repair imei
Then try unlock tool
[17:08:52] Normal condition phone
[17:08:35] Not have unlocktool backup
[17:08:21] Security backup I have cm2tool
[17:08:02] Vivo y21 2021
Pd2111
I have security backup
It\'s possible dead repair?
Dead after unlock unlock tool
[16:52:26] I already managed to enter the recovery is not the same
[16:51:01] While holding power botton, press volume up then volume down
[16:49:21] ITS still returning at same point
[16:43:35] press vol- and power at the same time several times and you should enter recovery
[16:42:11] Use buttons to exit
[16:41:26] Neon ray pro...how do i go about it
[16:39:17] TA 1352 network unlock
[16:39:04] Card found : 639CC893 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...

>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
[16:17:32] No need
[16:15:34] Are you ready to test it now and the post your result here?
[16:13:10] send it here and do not push me to ban you for this kind of advertizing in future.
Thank you!
[16:06:27] All testpoint, signed firmware and most mdm files are available...
https://t.me/MiUnbrickService_s
[15:40:29] Your dongle support period is expired.

If you have credits at your Infinity Account see top menu and order renew. It takes about 7-8 minutes.

If you have no credits - contact to any seller https://infinity-box.com/buy/
Send your dongle S/N to seller
Order [CM2] support renew for 1 or 2 years

How to check support date - https://infinity-box.com/doc/?r=17
[15:40:12] Server features may be limited for expitred account.
[15:38:25] Why is this showing? And what\'s the solution
[15:38:06] Firehose file will also help
[15:37:36] How do I go about it
[15:36:23] Possible
[15:35:19] Oppo a92 forget password
[15:34:42] Help
[15:24:44] Sorry my brother duty time is finished I will disturb you on Monday…….🙈
[15:16:56] Ok cool
[15:16:49] Yes possible 💯✅👌
[15:11:43] Admin help
[15:11:32] 15.7.1
[15:09:33] Get most solutions for free. Testpoint and the rest
[15:09:00] https://chat.whatsapp.com/LGt8ljRRfTJ8Pw4SLEeyAm
[15:00:43] Everything is ok
[14:59:08] Baseband status and imei ok?
[14:57:07] Ask code ??
[14:56:49] You can get some on the group image files while some that are not available can be derived with the help of the conjugation if available 👌
[14:54:00] Send a direct message @Abdulwasii_remote_tech_service for more info...
[14:53:34] Yes available ✅💯👌
[14:48:09] Not free
[14:34:52] Can you help me, bro? 😇
[14:31:23] Ok brother
[14:31:03] Eish
[14:30:34] Dis tool have not ever help me unlock any mtk phone
[14:30:24] Can you share
[14:29:41] Not sure if u can unlock with cm2
[14:29:01] Redmi 9a needs network unlock
[14:28:24] Wat do u actually want 2 do
[14:27:57] LOOK BROTHER ITS SHOWING THIS
[14:27:30] gui: Default
S/N: 1AA6BFC4 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.36
Load IDBase v723487 Ok

Update configuration...
Configuration [12060] updated

Load IDBase v723487 Ok
Operation : SP Unlock [ v2.36 ]
Mode: FLASH

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port (COM60)
MODE: BOOTROM
PORT: 60
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6765 SBID: 0x8
[14:26:46] 1. Try change battery first
2. Connect wifi n update
[14:15:59] TA 1352 network unlock
[14:15:29] Card found : 639CC893 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...

>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
[14:11:03] Hlo
[14:11:00] We are here to help each other
[14:10:41] If can\'t help just leave
[14:09:34] Okay sir
[14:08:53] Yes
[14:08:41] Stop accused our country
[14:07:11] is there any way to unlock TA-1352
[14:06:04] MYA-AL10
[14:05:36] It\'s not the keys problem
[14:04:18] check that the buttons are ok, then if the problem persists, write the appropriate firmware
[14:01:28] Automatic recovery mode solution
[13:45:21] Reinstall it
[13:43:33] My cm2mt2 can\'t open. It\'s showing me this
[13:41:16] Thanks alot
[13:38:23] Please how much?
[13:38:12] Please anyone with infinix x688b MDM remove file,?
[13:35:55] Try use infinix boot Raphael v2 first
[13:26:28] Nokia C21 ta-1352 imei repair
[13:25:51] Use testpoint
[13:24:46] What configuration can I use
[13:23:32] Hahhabahbaa
[13:22:10] Available
[13:21:52] Wrong testpoint then
[13:12:48] Ok my brother
[13:12:30] Wait admin intervention
[13:10:08] Will do that 2nite
[13:09:59] Last time it’s did so that’s why I want to confirmed from you then I try
[13:09:29] Ok
[13:09:15] Why nv killed?
[13:09:03] Flash without saving nvram. Imei not null, but default
[13:09:00] Pics?
[13:08:48] Then yoy suppose to get default details
[13:08:36] But not showing the username
[13:08:13] Mostly my brother it’s killed the nv data that’s why I asked you
[13:08:07] Done that
[13:07:33] Try bro results ?
[13:07:19] If correct configuration used and yet not works then try TP
[13:07:17] Hello good afternoon dear brothers redmi m2006c3lg is it possible for network unlock on sp unlock
[13:06:50] Run dongle manager bro
[13:06:34] Chipset?
[13:06:23] What results to null imei
[13:06:10] Connect in this mode with TP bro
[13:05:28] I don\'t quite understand, friend. Do I need to flash again? I have already flashed many times
[13:04:52] For which software ?
[13:04:14] https://dl3.infinity-box.com/00/pub/?dir=/software/
[13:03:25] 🤔
[13:02:56] That\'s true though but shouldn\'t be an oppression
[13:02:21] Can you ????❔
[13:02:03] What operation do you want to perform here?, mind you KG5K has this issues on cm2sp2, I you want to write nv ram or imei or read nv should be done in diag mode else rest is flash mode but identify first before performing any operation but not all option supported.
[12:59:26] Owk then we move provide details I ask
[12:58:04] Fixed the phone already and customer has taken away
[12:57:40] Show me your identify logs
[12:57:24] Kindly full flash bro
[12:57:07] Yea
[12:56:50] Wait, be realistic here, do you identify before performing any operation on device ?
[12:46:00] Does it use a da-file
[12:45:12] Tecno KG5J frp solution need help on boot mode
[12:35:31] Please, how can I retrieve my cm2 username and password
[12:22:51] Feel pace 2 frp pls
[12:09:36] X665 da file pls admin after testpoint it shows da fail
[12:09:31] X665 da file pls admin after testpoint it shows da fail
[12:09:26] X665 da file pls admin after testpoint it shows da fail
[12:00:30] X665 da file pls admin after testpoint it shows da fail
[11:58:39] I am from Nigeria
[11:50:51] location
[11:46:23] License tool
[11:17:11] Hi guys can any one help with set up for infinity cm2 set up please
[11:16:56] TA-1235 format not done
[11:16:32] 1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM7)
MODE : NOKIA USB SERIAL
PORT : 7
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : E53194087C64E7434DAC00B25557E843
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : W
[11:16:30] hello team infinity,
[11:12:08] Kh6 testpoint needed by user @kriztek,
I have it, tell me what\'s on the table let me drop it.

Thank you.
[11:10:49] I want to remove frp infinix
Access denied
User and pass is good ?
[11:09:15] Available
[11:06:43] Tecno kh6 test point please
[10:56:50] i have already old backup file sir
my problem is solved

i get gmail from infinity
but not atteched any type of file from mail
[10:54:48] Make once again now:

- Go to c:/InfinityBox/BEST/ folder
- Delete License_best_xxxxxxxx.ask file
- Delete License_best_xxxxxxxx.dat file
- Run BEST.exe
- Enter GOOD WORKING e-mail address and you will get licence file to your mailbox
[10:42:43] Dem no de knw say we Wey get dis solution ... It was not free... We paid 4 it... Even in free town nothing is free...
[10:40:27] I like u die
[10:29:58] Sad reality
[10:21:46] I don\'t understand some technicians here especially those from Nigeria, you want everything free just because you bought cm2.

Signed filles are not free, I pay for them for one full year, every year, I spend time looking for testpoint sometimes damages phones that I had to pay for.

You come here doing as if it\'s your birth right.

If you can not pay for people\'s sweat, then you go do the research yourself and give it out for free.

Greedy and stingy set of people.

I have paid as high as 200$ yet it did n
[10:16:19] But u can download firmware...
Format n flash... Atleast it can last u a little
[10:14:05] Not free
[10:13:35] Not free
[10:12:52] Click first
[10:12:49] Guy wen u open d tool... U go see identify button
[10:12:38] Not free
[10:12:05] U hv firmware
[10:11:41] Tecno kg5k
[10:09:35] Easy
[10:08:12] Wats d problem
[10:07:56] Firmware sells
[10:07:20] Pls send link
[10:03:54] Tecno kg5k
[10:01:28] First
[10:01:26] Click on identify
[10:00:06] Tecno kgkk
[09:50:52] Where to find
[09:01:15] Need remote service for Nokia ta 1347 no imei
[08:59:03] Ok
[08:58:42] Not free
[08:58:28] Can you send the download link if it’s free
[08:57:59] This
[08:54:25] Please infinity Cm2 we are in serious need of your new updates to help tackle the recent difficulties faced Tecno, Infinix, Itel and other devices right now.
[08:53:54] I need this particular file
[08:53:43] Hello
[08:52:48] BASEBAND IS CORRUPT
[08:52:33] Nothing found for X689f_H6510EF_R_R

If you will get the file upload it to support with iosFileUploader

[08:51:28] Meta can not write the imei because it can not access the protected port.

Use J-toolC software to access it.
[08:50:47] Found 1 file X689f
1. infinix_X689F_H6510ABCDEF_R_OP_211028V420

[08:43:16] Just in Infinty dongle license renewed, contact @Abdulwasii_remote_tech_service for more credit, licence renew and software update payment, icloud bypass, SN registration for icloud tools and many more.....thanks in anticipation 🤝.
[07:30:36] Not able Receive Licence
[07:30:14] Please infinity Cm2 we are in serious need of your new updates to help tackle the recent difficulties faced Tecno, Infinix, Itel and other devices right now.
[07:25:30] Yes, spd
[07:24:59] Okay
[07:24:50] Guy is d phone spd
[07:23:35] Available
[07:23:34] I don\'t just get you at all..
[07:23:20] Yes. Unisoc T610
[07:22:39] Is the phone spd
[06:04:38] I have 2.14 version. It is note latest?
[05:45:25] Yeah Bruh that\'s for you
[05:45:11] is this for me?
[05:43:10] I couldn\'t find nvram for this phone on the internet (
[05:42:45] The tool I told him will fix it in one click even that\'s what I used when last I fix Tecno bd4h v11
[05:41:44] Browse nvram online
[05:40:33] And you said it can\'t fix it Bruh download the latest version 24.0 and fix your imei
[05:39:50] 11
[05:38:24] What version is that your phone
[05:38:23] Please help me, where can I get the correct nvram?
[05:38:01] Not working
[05:37:46] Try using Maui meta 3g latest version
[05:37:18] I want to fix the imei
[05:37:18] You need to write nvram
[05:36:53] What do you want to achieve
[05:36:53] Do you have nvram for this phone? I couldn\'t find her. The repair network button is not active in cm2sp2
[05:34:53] Write a new nvram or if u hv a tool repair network
[05:24:55] X689f nvram pls
[05:24:30] Hello, friends. Can you help restore the network on Umidigi A13 Pro (T610) after clearing nv? I returned the IMEI, but the network is not working
[05:11:32] Motherboard pics ?
[05:08:55] SN?
[05:08:25] 👆
[04:19:54] Clear pics of motherboard?
[04:19:35] Full flash bro
[04:18:51] Try, results ?
[04:11:34] Motherboard clear pics?
[03:43:09] Help
[02:42:27] I bypass but it relocks after connecting to the internet any new solution please
[02:24:41] Then connect with test point again
[02:15:14] Can I get all test point here

InfinityBoxTalks 2022-12-02

[23:09:16] Fra
[22:25:10] Does it work Even after wiping the phone?
[21:50:38] You can share it please
[21:50:10] Okay
[20:52:15] Tecno ci6 shows these error how fix
[20:41:14] No gift from admin on this so you will have to pay me to get
[20:30:47] I have a tecno kg5h for test and post result public
[19:55:51] Yes
[19:55:29] Not nck but nep lock
[19:55:04] Yes
[19:46:39] if its its an easy buy device, likely not to format.
[19:32:39] Nokia c20 iwant format please help if connect automatically phone power on itself
[18:59:52] share your dongle throught the black hole?
[18:35:21] Meaning of this error
[18:09:38] Dorid VPN settings for netone and for itel, Samsung,Huawei, Techno,Redmi...
https://youtube.com/watch?v=5au0ved0q4Q&feature=share
[18:08:44] What solved the problem
[18:08:27] What solved the problem
[18:07:32] ineed help
[18:07:24] yes
[18:04:04] I tried but couldn\'t help.
[18:03:00] الرجاء المساعده لحل المشكلة
[18:02:23] === DongleManager [Infinity] v1.92 [02/12/2022 07:50:55 م] ===
Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Card-Reader: Generic EMV Smartcard Reader 0
HWID: 0000BA2721F34082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): 4333BA27
Firmware version: 0153.02
=== Started: 02/12/2022 07:50:56 م ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on serve
[17:37:37] Please help
[17:18:06] @yuslamunique,

Respond
[17:02:09] Available
[16:51:18] I have used it\'s x6511 b fdl even selected it\'s correct loader but failed to boot
[16:41:09] If mdm lock ..it does
[16:40:46] Smart 6 doesn\'t require test point
[16:40:40] Same send
[16:40:33] Send me board pic
[16:40:16] Needed
[16:40:12] Tecno KH6 Test Point
[16:36:53] Infinix smart 6 test point
[16:20:30] Wrong loader come inbox
[16:09:33] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[16:09:33] Card found : 515D0A33 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : X6511
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupporte
[16:07:35] Unlock zte L210
[15:56:09] Post log
[15:20:39] Infinix x6511B fails to remove from using sp2 even after selecting the correct loader
[15:05:27] Flash mode
[15:05:17] Use boot mode
[14:30:52] Help with Safaricom Neon Ray pro frp
[14:21:37] Infinix x612
[14:21:30] It\'s now saying this
[14:19:15] I did backup but not yet upload on link if you will donate for bundle i will upload
[14:15:48] Just restart phone n pc
[14:15:30] Or u change d PC version with the latest os
[14:14:44] With tym
[14:14:33] Check USB driver and USB or restart pc
[14:12:42] Meaning ?
[14:08:12] *Frp
[14:08:10] I am getting this error Infinix x612. I am trying to remove from
[13:58:45] All testpoint for Infinix, Tecno are available
[13:51:42] Still de same
[13:50:17] Bypass by adb if.you can enable
[13:49:42] This is nokia
[13:48:11] Bro
[13:48:09] With cm2
[13:46:15] How do i do that man?
[13:42:12] Need network to blend it
[13:41:45] Unlock bootloader.. it will boot
[13:40:54] My cm2 showing this error only if am reading file is showing like this
[13:38:55] Need help
[13:35:30] No
[13:26:15] Available
[13:25:15] Do a full flash bro
[13:15:34] I was trying to remove frp and when i powered it on that is what it is displaying
[13:14:13] Tecno BD4j test point please
[13:11:55] What could be the problem
[12:38:31] Check dm
[12:37:10] Done this, how do I contact support
[12:31:04] Yes send it
[12:30:38] I will only listen to the admin but if you have the phone with you now to test it, I will send it to your dm
[12:29:42] Yes Post it here
[12:29:19] Okay
[12:28:49] Flash with swd after sels tool
[12:28:08] X657 mtk
Why tp
[12:27:54] please let\'s wait little bit.
I trust you but it will be good to get reply from somebody else too
[12:26:44] He is not responding or should I post it here?
[12:24:01] Hellooooo,
You are not ready?
[12:23:18] Be will have to test it first before I post it here
[12:20:20] Never shared my tool
[12:15:33] I guess sharing tools

Make this https://infinity-box.com/?r=100155
[12:15:27] Keep sending response in public so that others will benefit
[12:14:59] Netframework also did this
[12:11:55] Why this?
[12:11:35] Kindly check your dm
[12:07:02] Suportt FRP ???
[12:05:59] VNE-LX2
PHONES
Honor X6

MediaTek MT6762G Helio G25 (12 nm)
[12:04:00] ??,
[12:03:48] VNE-LX2 FRP SUPORTT
[12:03:37] Hi
[12:03:01] Okay let em drop it with him
[12:01:15] +6 months support to your S/N or to any other S/N against it
[11:59:16] forum supporters will check it
[11:58:09] I have already followed the steps and posted on both forums
[11:55:38] Available
[11:51:41] kh6 Test point
[11:49:07] install CM2SP2 boot-pack and try loaders for similar models
[11:47:31] model?
[11:45:49] sellers https://infinity-box.com/buy/
no limits
estimated price https://infinity-box.com/price/
[11:36:07] get this https://infinity-box.com/?r=100202
Make [Identify]
if you will see a message like \"EMI failure\"
Right after that go to \"Cloud\" tab and click to \"Get Preloader\" button.
In case of success you will get from server file with preloaders for your phone.
Unpack preloaders and boot phone again this way: https://forum.infinity-box.com/viewtopic.php?t=9483
Of course you should select one of preloaders that you got from the server
[11:35:15] try to select loader for similar model and try
[11:33:38] a015f imei repair solution
[11:16:14] Your dongle was damaged with sharing tool.

Now use FREE repair https://infinity-box.com/?r=100203
[11:04:55] GOOD MORNING UNLOCK ZTE L210
[10:59:49] I have followed the steps please assist in repairing my dongle serial is
00F4FA380D
[10:56:22] done thanks
[10:51:33] umt cm2 chimemra
[10:45:10] This files still didn’t work, already download and flashed it make shows like broken screen
[10:42:13] https://www.henrypp.org/product/freeshooter
[10:37:42] ok sir, let me buy it for you
[10:37:22] Found 1 file tecno le6
1. tecno_LE6_H6222CDEFG_R_GL_211101V242

[10:36:41] They are paid firmware!
[10:36:22] google helps
[10:36:10] Let me friendly suggest you to visit web site before ask little bit strange questions
[10:35:50] Admin help pls
[10:34:32] select another loaders (similar models) and try
[10:33:20] 🙏🙏
[10:33:09] charge battery, flash it several times and with different files
Do you see the same error again?
[10:27:46] Why aren’t you guys updating the firmware on your site admin?
[10:22:10] Le6 firmware buid number 221028v747 needed pls!
[10:13:30] who can give it to me manually
[10:12:19] please fg file for itel a509w is not found in bootpack
[10:06:18] Do anyone have preloader for Mobicel NEO-LTE.
Some phoens comes with MTK CPU and some With SPD CPU.
Struggling with SPD Preloader.
Does anyone have?
[10:06:16] Please how can I repair Redmi note 10s imei
[10:05:52] itel a509w boot file needed
[10:05:32] Which version do you used?
[10:04:49] Thank u its finally okay
[10:02:21] The phone already gone my brother
[10:02:19] I tried to format infinix x6811b, pls help
[10:01:22] Do you have a tutorial video?
[09:59:39] I have followed the steps please assist my dongle serial is
00F4FA380D
[09:55:26] Well
[09:38:51] Found 2 files IN5-H3721A
1. tecno_IN5_H3721A_N_IN_190319V144
2. tecno_IN5_H3721A_N_190319V43

[09:38:15] Nothing found for IN5-H3721A-N-171215V10

If you will get the file upload it to support with iosFileUploader

[09:25:04] asking code?
[09:24:14] Any one how can unlock network this model
[09:16:24] Yes brother
[09:00:16] Hi guys, is possible to unlock the network on Nokia G10 with Cm2mt2?
[08:56:13] Service available sir kindly contact @Abdulwasii_remote_tech_service for more info.
[08:55:03] Please I need CM 2 server credit.. How do I get it and how many are there in a pack and how much?
[08:52:52] Nothing found for redmi 9s

If you will get the file upload it to support with iosFileUploader

[08:51:59] Redmi 9s firmware
[08:47:54] SO AM FININSHED
[08:47:17] 😒
[08:46:55] NOPE IT ONLY STOPS AT SEARCHING NETWORK
[08:46:32] Thanks
[08:46:25] Does it ask for code ?
[08:45:52] YEAP
[08:45:11] Is imei shown here Sam as the one at the back of device?
[08:44:24] Card found : 515D0A33 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : SPRD ( Legacy )
Project Version: SC6531EFM_BAR
BASE Version: BASE
[08:40:08] Logs?
[08:34:05] Tried sp2 still it failed
[08:33:02] Try cm2 module ?
[08:29:25] Benco e10 spd network unlock
[08:28:50] Ok
[08:28:46] Check port
[08:28:18] Error protocol handshake failed
[08:27:22] Logs ?
[08:27:08] Yes brother it’s showing failed
[08:26:27] Try result?
[08:26:01] I need fill of this phone
[08:16:54] Nokia c21 plus is it possible to unlock on spd2
[07:53:44] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[07:53:44] BROM : 0x00007024 : DA SEND ERROR
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC
Retrieve device config...

=> What to do https://infinity-box.com/?r=100189
=> Try loaders:
1. 0_base/BASE_v2112/MTK_AllInOne_DA.bin

Ok

Error : Fail to init protocol
>>> Remove battery and cable. Check cable/connection/drivers and repeat operation!

Reconnect Power/Cable now

Operation : Read Security [ v2.37 ]
1. Power Off the
[07:53:44] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[07:53:44] === [02-12-2022 10:01:56 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===
S/N: 8B220F84 v0154
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v312457 Ok

Server unavailable
Username or Password is wrong - set it via Settings
https://infinity-box.com/?r=100166

Load IDBase v312457 Ok
Operation : Authentication [ v2.37 ]
Authentication...
Account is Ok
Balance: 0
Support: cm2: 2023-06-17;

Telegram Channel: @InfinityBox
Telegram Group: @InfinityBoxTalks

Account: https://infinity-box.co
[07:48:52] After patching boot which you must have unlocked bootloader, the phone will write \"Orange State\"
You will have to patch the LK.img.

Then use S-tool to remove the following fill.
Scorpio
E-wallet
Local Update.

Factory reset the phone and confirm your work
[07:45:39] For?
[07:45:13] Logs ,?
[07:45:02] @justunlocker everyone be aware of this scammer I got scammed 160 USDT
[07:41:02] Run cm2spd, execute sp unlock function, result ?
[07:39:30] sc6531e
[07:36:56] Chipset ?
[07:34:15] Any one who can help me with network unlocking process for itel it2163d
[07:15:44] Sure 👍
[07:00:06] But I do patch boot only before
[06:57:36] It means one will dismantle phone
[06:57:23] Smart reset extra, result ?
[06:56:36] Ufi, easyjtag plus or medusa pro
[06:54:50] ISP which tools I dat
[06:54:25] Is your phone rooted, bootloader unlocked, patched LK_a and LK_b partition?
If yes, inbox let me give you the app
[06:54:15] Any one
[06:53:52] From me or Him ?
[06:53:41] If diag disable isp can fix 💯✅
[06:51:05] Okay how do I get this
[06:48:18] Yes ta1359 pls
[06:46:50] I wrote you but you ignored ne
[06:46:34] Need redmi note 11 Pro Vida india dump
[06:45:50] You read it bro
[06:45:25] I have it
[06:44:01] only make mtk port not power on
[06:29:34] But now fixed?
[06:29:20] Device state before flash ?
[06:28:01] Yes, there\'s a solution with factory reset with no relock.💯✅👌
[06:26:16] Device model?
[06:25:55] Ok I’ll try that, thanks
[06:25:31] Then try using After sales imei repair tools
[06:19:00] Thank you my dear brother…🌹
[06:18:44] Baseband is okay
[06:18:23] Baseband status on device?
[06:18:11] cpu 9832e
[06:17:56] Yes bro launch cm2mt2 and execute sp unlock function
[06:17:51] model mobicel neo
[06:17:19] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[06:17:18] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : I
[06:17:17] Yes sir service available contact @Abdulwasii_remote_tech_service for more info.
[06:15:08] Ok thanks you my brother and g10 can I unlock on MTK2
[06:15:05] No
[06:14:36] Did you identify before you do any process on device?
[06:13:49] So what do I need to do to fix the problem?
[06:13:24] Did you?
[06:13:19] Yes I know that\'s the reason I asked
[06:12:59] G10 supported but 2nd edition not supported for now
[06:11:12] It is mtk
[06:10:39] Did you identify before you do any making on this device with cm2 ?
[06:09:55] Cm2mt2 and execute process
[06:08:01] да, свяжитесь с @Abdulwasii_remote_tech_service для получения дополнительной информации.
[06:06:42] Did get it?
[06:05:25] Thanks
[06:03:57] Ask code ?
[06:03:34] 👆
[06:03:13] Support Expired sir, needs to renew your license, contact @Abdulwasii_remote_tech_service for more info.
[06:02:42] Just says network locked
[06:02:03] Fixed?
[06:01:12] Asking for code?
[05:58:11] Contact @Abdulwasii_remote_tech_service for more info sir.
[05:57:55] CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
RNID: CB9141791121746DA5405C55E1861937

DA: USB: HIGH-SPEED

Boot done

[FL]: HW verification passed

Verify device config...
Ok
No loaders to verify
[FL]: Pre-Flash backup
Backup critical data [18] to C:\\InfinityBox\\CM2MT2\\backup\\MT6765__66E1638BC2CCFC8E3550F0984D74DA89\\
Done
[FL]: Pre-Flash backup passed

SEC_DL: False (RAPHAEL)
SEC_ID: 0x494E46494E495459424F584245535432

[FL]:
[05:57:54] i try to flash samsug a215u but showing error gui: Default
S/N: 019F8169 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v312457 Ok

Server unavailable
Username or Password is wrong - set it via Settings
https://infinity-box.com/?r=100166

Load IDBase v312457 Ok
Load: E:\\samsung fls\\a215u\\A215U U7 OS11 Scatter Firmware [Dead Boot Repair] (A215USQS7BVC2)\\MT6765_EMMC_Android_scatter.txt
Preloader [HW DEV] Info:
EMI: MT6765 preloader_s96717ra1.bin with 3 memory type(s) sup
[05:57:04] 👆
[05:56:37] Not password issue bro, you\'re license expired, contact @Abdulwasii_remote_tech_service for more info
[05:53:06] Yes service available sir contact @Abdulwasii_remote_tech_service.
[05:50:17] TA?
[05:13:03] No is not as u think I was asleep and did not see it message on time. Why must I ignore u. Check messages
[04:44:22] redmi note 3 mtk mi account remove file
[03:23:02] Yes unlock bootloader and apk remove with titanium backup cool but what of parmAnently Remove from system that survive factory reset?
[02:27:08] very good
[02:26:09] what remote tool do you need?
[02:25:39] use test-point
[02:24:26] Welcom
[02:17:51] CG7

InfinityBoxTalks 2022-12-01

[23:55:13] Help fix this issue please
[23:53:58] Hello
[23:21:21] Cm2 should let for remote
[23:14:07] I\'ve done it now it is opening
[22:27:24] Please help, how do I connect device in BROM mode?
[22:00:01] Make this https://infinity-box.com/?r=100155
[21:59:59] Smart card misconfiguration
[21:57:08] hi there my cm2 two is saying this
[21:53:19] please explain
[21:44:41] My dongle isn’t up to two years!
[21:44:14] I contacted you and you ignored me because I am a Nigerian like you.
My brother look for oyimbo to help you.

Thank you.
[21:39:31] Check your files
[21:33:18] Ok thanks 🙏
[21:31:24] D titanium backup did not work for me. Tried and could not delete d plugin.
[21:11:19] https://infinity-box.com/buy/?ac=2
[21:02:59] Pls Nigeria man that can help me do activation
[21:01:15] Download another firmware Boss
[20:16:14] Okay I did everything u told me
[20:00:05] We need confirmation from users.
We are still waiting for reports of other users.
If you will see success reports here let us know
[19:58:50] send good quality pcb photo here
[19:58:13] test-point?
[19:57:39] default boot selection and use test-point, it was tested well by people here.

http://dl1.infinity-box.com/00/?dir=test-point/
[19:53:14] if you have zero reading skills want to pay - do it
another way - read my words well

It\'s my last answer for today
[19:51:49] Thank you!
[19:42:39] Does this mean I have to pay now ?
[19:41:33] Your dongle was damaged with sharing tool.

Now use FREE repair https://infinity-box.com/?r=100203
[19:41:21] 1. read #CM2MT2 boot manual https://infinity-box.com/?r=100189

2. see test-points here http://dl1.infinity-box.com/00/?dir=test-point/
if not exist - try google and send your image here for all users
[19:41:11] Help me for the last time bro
[19:40:38] you must confirm it once again
have no time to repair your dongle for free again and again

waiting
[19:40:06] What is the problem with it?
[19:39:55] I formatted hard disk so I can\'t use virtual here anymore at first I didnt know that it can damage cm2 but now I know
[19:39:40] ESTIMATION https://infinity-box.com/price/
[19:39:12] use BOOTROM mode. If you can not - run this https://infinity-box.com/?r=100202
and you will see more info
[19:38:21] nice
what tool you must to uninstall now?
[19:37:49] Your dongle support period is expired.

If you have credits at your Infinity Account see top menu and order renew. It takes about 7-8 minutes.

If you have no credits - contact to any seller https://infinity-box.com/buy/
Send your dongle S/N to seller
Order [CM2] support renew for 1 or 2 years

How to check support date - https://infinity-box.com/doc/?r=17
[19:37:28] And I have understood very well
[19:37:14] Ok bro am reading
[19:36:59] I have no time to copy/pase again and again
you must read all my answers
[19:36:03] it\'s something with your PC after windows update
check https://www.google.com/search?q=0x0c000007b
[19:36:00] That dongle was damaged after sharing
[19:35:31] what?
[19:35:06] I have read
[19:35:05] try it pls
[19:34:54] model?
[19:34:14] also read https://forum.infinity-box.com/viewtopic.php?t=10657
[19:33:33] Make this https://infinity-box.com/?r=100155
[19:33:01] What is the Dongle S/N?
[19:32:13] I cant do a mistake twice bro
[19:31:36] Alright
[19:31:23] you got dongle fixed today.
Have you killed it with sharing tool again?

Read this - How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174

Please confirm you understand the rules finally
[19:31:18] Not true. I know everything
[19:30:57] Your phone is not entering meta mode, the tool will help you activate the mode while cm2 will continue from there?
[19:30:13] Run CardID.exe - https://infinity-box.com/?r=35
Select Card-Reader
Click to \"Read\" button and copy/paste text

DO NOT send screenshot/video but copy/paste text from software window.
[19:29:55] It worked I shut down pc went to workshop on reaching there is didnt open so I formatted hard disk installed new windows it could be that the other program was still working in background
[19:29:18] Ok
[19:29:08] It\'s not free
[19:28:50] What’s tool S
[19:28:21] you got dongle fixed today.
Have you killed it with sharing tool again?

Read this - How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174

Please confirm you understand the rules finally
[19:28:16] You will need tool S and cm2 to change it, you don\'t need testpoint
[19:27:39] Simple process
[19:25:06] Please read this too:

How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[19:14:28] Yes
[18:41:45] Any body can reply please
[18:20:53] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[18:20:53] AGENT : CHANGE : v2112
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...

BROM : 0x00007024 : DA SEND ERROR
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC
Retrieve device config...

=> What to do https://infinity-box.com/?r=100189
=> Try loaders:
1. 0_base/BASE_v2112/MTK_AllInOne_DA.bin

Ok

Error : Fail to init protocol
>>> Remove battery and cable. Check cable/connection/drivers a
[18:06:27] Pls I need solution to repair imei on tecno spark 9T(KH6)
[18:04:20] Yes bro
[18:04:05] Yes possible
[18:02:41] Infinix-box 5F715768 any hopes today ? My customers are going away
[18:01:56] frp kg5j
[17:59:08] I have tried to remove passawd bt it refused
[17:59:08] Please I need your help
[17:56:03] Can someone rent me Unlock tool?
[17:47:04] Please see manual Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[17:45:55] not found
try google now
[17:45:36] Found 1 file mobicel V1
1. Mobicel_MT6580_Mobicel_Mobicel_R1_Mobicel_R1_7.0_alps_mp_n0.mp2_V1_tinno6580.we.n_P144

[17:45:23] Your dongle support period is expired.

If you have credits at your Infinity Account see top menu and order renew. It takes about 7-8 minutes.

If you have no credits - contact to any seller https://infinity-box.com/buy/
Send your dongle S/N to seller
Order [CM2] support renew for 1 or 2 years

How to check support date - https://infinity-box.com/doc/?r=17
[17:44:25] try CM2SP2.exe
[17:43:55] widescreen
[17:43:09] https://t.me/i_talks_ru
[17:42:31] No Nigeria in select county
[17:41:43] It means file is not exist at server. Try google
[17:41:07] I\'ve tried it but nothing found
[17:39:06] Try here @FlashFileSearchBot
[17:39:06] Admin please I need file for iphone 13 pro max clone with cpu MT6753
I\'ve searched via flash file search but all I got are files for MT6580

Please kindly help out
[17:28:37] I have tried to remove passawd bt it refused
[17:28:35] Есть ли лицензия макси для донгл?
И какая стоимость?
[17:15:53] C20 network lock
[16:54:09] Works
[16:54:06] In username n password
[16:54:00] And paste
[16:53:51] Login to iOS web
[16:29:58] Admin solution to this pls
[15:25:06] Looking for mobicel V1 flash file please
[14:55:00] Tecno or Infinix?
[14:50:51] I have it
[14:48:10] infinix CI6 mdm remove I need
[14:47:42] sio
[14:47:41] Mtaani kwetu aio
[14:32:46] now sorted
[14:27:37] @https://t.me/InfinityBoxTalks please help
[14:17:35] Card found : 639CC893 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Monster_00WW-user 11 RP1A.201
[14:16:50] admin its been 20 mins and my TA 1369 hasnt been unlocked, i did the process again but still
[14:11:08] Please, help🙏
[13:55:57] TA 1369 network unlock?
[13:54:15] I connected my Best nk2 dongle, and it says smart card not found! Connect smart card, any suggestions or solution pls
[13:40:40] I can wa.me/255692354947
[13:34:28] Thank you I will appreciate
[13:25:08] PTFN: MediaTek USB Port_V1632 (COM8)
MODE: BOOTROM
PORT: 8
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]

BROM: MEID: FE446BE60CC906B709B89DAA85EDC7F5
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 8BCE3307D74010B2FE8409EC6ADD70F1C372554D4F49C8DE980D785820F8E6DD
BROM: SLA: Local Auth
BROM: SLA
[13:18:26] Logs
[13:17:46] It\'s doesn\'t connect completely
[13:17:41] I can send you link to the file
[13:17:12] Send teamviewer
[13:16:54] normal mode
[13:16:43] So how do I flash or backup tecno CI6?
[13:16:41] Really appreciate
[13:16:06] Please I keep getting this error, I have uninstalled and reinstalled, restart pc still same.
[13:12:57] Xfirefly doesn\'t support flashing
[13:12:33] How do I flash on this platform ?
[13:10:55] Issue?
[13:10:41] Please help me
[13:09:51] Please 🙏 I need firmware anyone please?
[12:58:55] Asking code?
[12:57:14] Moto xt2025-2 mtk support sim network unlock?
[12:44:55] I need Unlock tool seller??
[11:44:48] Reinstall put off antivirus first
[11:43:55] Please how do I flash on this platform ?
[11:41:26] Help pleas
[11:40:43] 👌😊
[11:37:11] password error and i have the password... help
[10:56:28] BROM: SecLevel: 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x01
BROM: PRELOADER PORT
PTFN: MediaTek PreLoader USB VCOM (Android) (COM15)
MODE: PRELOADER PORT
PORT: 15
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580

BROM: SecLevel: 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x01
BROM: PRELOADER PORT

Error : Fail to init protocol
>>> BROM connection mode required!

Reconn
[10:56:27] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[10:56:27] gui: Default
S/N: 5D0A0CC3 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v723487 Ok

Update configuration...
Configuration [12060] updated

Load IDBase v723487 Ok
Operation : Identify Device [ v2.37 ]

Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
[+] Local SLA
[-] Force BROM
Wait...

1. Power Off the d
[10:53:20] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[10:53:20] gui: Default
S/N: 5D0A0CC3 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v723487 Ok

Update configuration...
Configuration [12060] updated

Load IDBase v723487 Ok
Operation : Identify Device [ v2.37 ]

Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
[+] Local SLA
[-] Force BROM
Wait...

1. Power Off the d
[10:45:59] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r

[10:45:59] I want to renew my dongle 😒Infinity-Box/Dongle [CM2] 1 year support renew120
Price USD?
[10:45:18] What\'s the price (USD)
[10:44:22] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r

[10:44:22] I want to renew my dongle 😒Infinity-Box/Dongle [CM2] 1 year support renew120
[10:42:05] Pls Tecno kc8 boot?
[10:38:30] vivo y02 v2217 da send error. problem demo mode
[10:37:36] Hello same issue now it worked Once very early in the morning now it has done same error again .what\'s wrong with my dongle 😭😭😭 am now formatting hard disk I install new Windows hope it will be fine with new windows
[10:32:55] This platform
[10:31:58] I can\'t flash on the other platforms where I connect my CI6
[10:31:10] Pls admin or any body be or help
[10:30:36] wch
[10:30:07] Please I have issues
[10:28:10] Hello admin happy new month pls I need solution on Nokia c30 diag mode not working and is unisco pls help
[10:28:04] Hello admin happy new month pls I need solution on Nokia c30 diag mode not working and is unisco pls help
[10:26:56] ohh
[10:20:14] almost all avialable
[10:20:09] TP find not a problem
[10:20:00] or possible another model
[10:19:43] possible
[10:19:36] So meaning that this is another variant?
[10:17:14] this board is different
[10:17:09] https://www.lazada.com.ph/products/infinix-hot-10-lite-x657b-3gb-ram-64gb-rom-original-motherboard-i2718782682-s13014536910.html?spm=a2o4l.tm80167379.5934338580.1.5ba79rVA9rVAGR.5ba79rVA9rVAGR&priceCompare=skuId%3A13014536910%3Bsource%3Alazada-om%3Bsn%3A6b91ef5d-5a7a-4fe6-89be-4df9b66c50b5%3BoriginPrice%3A265000%3BvoucherPrice%3A259500%3Btimestamp%3A1669889793308%3BsearchDisctDet%3A%5B%7B%22discountValue%22%3A5500%2C%22toolCode%22%3A%22shopCoupon%22%2C%22voucherChannelId%22%3A1%2C%22voucherId%22%3A900000009
[10:13:02] X65b is Android 10
[10:12:41] No test point use da file connect... Can help u wit da
[10:12:24] Yes am sure
[09:50:32] are you sure model X657B
[09:46:14] Send log
[09:45:44] Nope it\'s android 11 failed to jump brom and all build in loader failed
[09:42:57] I think this should be android 10,
It should not need testpoint
[09:41:36] Your software logs?, before looking for tp
[09:38:03] Available but Admin has not place any offer yet, or you want to pay for it?
[09:37:11] Kindly assist with X657B test point
[09:35:20] Please I need this X657B test point
[09:31:36] Please I need it
[09:28:01] PTFN: MediaTek USB Port_V1632 (COM8)
MODE: BOOTROM
PORT: 8
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]

BROM: MEID: FE446BE60CC906B709B89DAA85EDC7F5
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 8BCE3307D74010B2FE8409EC6ADD70F1C372554D4F49C8DE980D785820F8E6DD
BROM: Sending FireFly
FireFly:
[09:27:38] PTFN: MediaTek USB Port_V1632 (COM8)
MODE: BOOTROM
PORT: 8
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]

BROM: MEID: FE446BE60CC906B709B89DAA85EDC7F5
BROM: SecLevel: 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: 8BCE3307D74010B2FE8409EC6ADD70F1C372554D4F49C8DE980D785820F8E6DD
BROM: SLA: Local Auth
BROM: SLA
[09:14:14] hC9aP3 ffu need for cleaning rpmb
[09:10:38] Xml file.
[08:56:25] I have the testpoint and mdm
[08:49:24] Nothing found for a025f

If you will get the file upload it to support with iosFileUploader

Channel - Group Chat
[08:48:30] Try here @FlashFileSearchBot
[08:48:30] i need file for a025f dead solution please
[08:48:01] Make this https://infinity-box.com/?r=100155
[08:48:01] dongle misconfiguration
[08:46:53] Tecno
[08:46:43] Try raphat 2
[08:21:41] I still don\'t understand ur solution on easy buy pls
[08:21:16] Because if the admin plug in is not remove totally from the phone, the phone will still locked
[08:20:12] Okay,
I don\'t have the that particular phone now but I have the testpoint and easy solution.

I was using titanium, I humbled myself for someone that we did a swap, I gave him testpoint, he gave me the app.

Since then I just love it
[08:19:23] Bring out ur own solution pls
[08:18:29] Ok bring out ur solution step by step, because I have done many through my solution
[08:18:29] Do you have any?
[08:18:16] Yes brother.....I am very fast with it
[08:17:37] Can fix easy buy ?
[08:17:01] I understand bro, why use hammer to kill a fly when a simple broom can fix it?
[08:16:41] Let people try and see if it\'s or not. Pls you can bring out ur solution without compromise
[08:15:34] But it\'s working for me
[08:12:53] Titanium is a longer process and waste of energy, most times not reliable.

There is a better one that is trusted for decade now.

Is the offer open for me,
So that I will drop the testpoint and app to remove it, step by step.

And also to rewrite imei without stress.
[08:12:06] After rooted access, install this app on the phone, and open it you will see all system app and download app, you can delete security plug in app from there.
[08:03:43] After unlock bootloader with cm2 mt2, root the phone with magisk root or any other root appk and download the titanium backup appk on Play store and click on the apps to remove the easy buy app completely
[08:03:40] After unlock bootloader with cm2 mt2, root the phone with magisk root or any other root appk and download the titanium backup appk on Play store and click on the apps to remove the easy buy app completely
[08:03:28] After unlock bootloader with cm2 mt2, root the phone with magisk root or any other root appk and download the titanium backup appk on Play store and click on the apps to remove the easy buy app completely
[07:59:57] 🤝
[07:59:29] Infinix x665b
But problem is resolved now.
Thank you very much
[07:47:14] TP required
[07:46:41] Baseband status ?
[07:46:19] Motherboard pics?
[07:37:17] Soon
[07:24:18] Write here model let check maybe supported or not else try YouTube tricks
[07:23:56] But if u have and idea of what can I do, please I\'m all ears
[07:23:39] Logs ?
[07:23:13] Model, android version?
[07:22:14] Connect device with this point here
[07:21:06] And now I need to restore NVdata and NVdata that I suppose that was erased when I did the wipe
[07:20:15] I don\'t have activation
[07:20:10] But imei was lost, so the phone connects won\'t recieve calls or message
[07:19:30] That\'s an high budget bro
[07:19:16] And it ran correctly and the phone started again
[07:18:46] Try using diag mode sir
[07:18:31] The models is TA-1347. Since I couldn\'t find firmware file for that model I flashed TA-1336 firmware that is compatible
[07:18:00] Connect pc to net, close exe and open then retry operation
[07:17:27] Yet an identify operations suppose to be in place
[07:16:49] Complete logs?
[07:16:47] The system was corrupted and couldn\'t do a backup
[07:16:19] No, try cm2sp2 with built-in loader
[07:11:48] thts what i can offer
[07:11:33] SN?
[07:09:21] bd4h
[07:08:09] Did you identify before execution?
[07:07:16] Motherboard pics?
[07:01:39] Nokia c1 second edition network unlock and Nokia G10
[07:01:04] Good morning all dear brothers
[07:00:34] Found 4 files TA 1174
1. nokia_105_105_TA_1010_TA_1034_TA_1037_TA_1174_TA_1203_here
2. noname_copy_M915F_7_PCB01_gsm_MT6260_S00.M915F_7_V1_copy_Nokia_TA_1174
3. noname_copy_M118_61D_PCB01_gprs_MT6261_S00.M118_IJ_191221_V01_copy_Nokia_TA_1174
4. [06:58:05] Model not supported for now bro
[06:55:58] If you don\'t understand magisk, it will put your phone in bootloops.

Once your phone is unlocked in bootloader, it will display it on startup.

There is a way to patch it, I am trying to communicate with you but you are not responding.
[06:53:25] Testpoint available
[06:51:57] Available
[06:48:47] I have the t stoping and the MDM file to remove security plugins
[06:48:19] Already fixed it
[06:47:47] Thanks, but you won\'t understand what I was trying to do because I have try all these options
[06:30:08] Use boot... Infinix Raphael v2
[06:04:05] Please which boot can I use to flash or identify it
[06:03:15] Tecno kg5j failed on 1st da boot after connecting the test point. Solution please
[05:40:34] Done?
[05:35:34] Motherboard pics?
[05:26:49] Your motherboard pics?
[05:25:12] This is KG5K for you on cm2sp2 after you identify any other operation needs to perform aside from flash should be done via DIAG mode 👌
[05:18:14] Dongle now fine thanks infinity box
[05:16:47] Tecno bd4j cm2 error
[05:03:59] Please check again power went out while I was using dongle. But I will do as you say
[04:53:47] What will u use to remove the plugin (easybuy) permanently after u have rooted d phone with magisk root. Got u but which will (permanent remove from system) I want to try it now.
[04:50:55] So now the phone shows null imei
[04:47:39] Tecno pop5 LTE
(Bd4a). Need test point
[04:47:32] Already was damage since the system was corrupted and had to wipe and install fresh firmware
[04:47:10] Bd4a Test point plzzz
[04:46:45] these are security backup from different phones
Writing into your device may damage original security permanently (do it own risk)
[04:46:18] Bc the infinity acc only lets me download one file a day :/
[04:45:41] Ok, so I need the backup Nokia g20 ta-1347 any of this works? Or only one?
[04:44:45] Thank done already
[04:43:58] these are security backup from different phones
[04:42:53] Wich one works for the TA-1347?
[04:25:11] This steps for a beginner cannot even understand at all
[04:24:57] Oyaa, give full details, stop this shambolic work, give step by step procedure.
[03:50:14] +6 months CM2 support to first person who can post here working step-by-step method how to remove EasyBuy with CM2

send the method to @Marvoo217
Once he test and confirm steps I will add 6 months support
[03:33:35] I have permanent solutions for easy buy both Spd and Mtk
[03:13:55] Hi
[02:22:56] https://goku.to/#.Y4gP9kp5LJM.telegram
GOKU - Watch Movies Online & Free Movies Streaming
[02:20:40] apk name ?

InfinityBoxTalks 2022-11-30

[23:32:09] This is step by step solution to all admin security plug in

Unlock bootloader with cm2 mt2 latest version and root the phone using magisk root, and download and remove those APK\'s with titanium backup
or similar (permanent remove from system), and thats it.
it will even survive factory reset without relock.

For more info let me know....
[23:31:04] This is step by step solution to all admin security plug in

Unlock bootloader with cm2 mt2 latest version and root the phone using magisk root, and download andremove those APK\'s with titanium backup
or similar (permanent remove from system), and thats it.
it will even survive factory reset without relock.

For more info let me know....
[23:23:51] Try and give report
[23:23:35] It works effectively
[23:23:05] This is step by step solution to all admin security plug in

Unlock bootloader and root the phone using magisk root, remove those APK\'s with titanium backup
or similar (permanent remove from system), and thats it.
it will even survive factory reset without relock.
[23:23:03] This is step by step solution to all admin security plug in

Unlock bootloader and root the phone using magisk root, remove those APK\'s with titanium backup
or similar (permanent remove from system), and thats it.
it will even survive factory reset without relock.
[23:23:00] This is step by step solution to all admin security plug in

Unlock bootloader and root the phone using magisk root, remove those APK\'s with titanium backup
or similar (permanent remove from system), and thats it.
it will even survive factory reset without relock.
[23:22:56] This is step by step solution to all admin security plug in

Unlock bootloader and root the phone using magisk root, remove those APK\'s with titanium backup
or similar (permanent remove from system), and thats it.
it will even survive factory reset without relock.
[22:55:06] Your dongle was damaged with sharing tool.

Now use FREE repair https://infinity-box.com/?r=100203
[22:37:56] 00F4FA380D
[21:59:41] I have the testpoint and I can show you how to remove it using cm2
[21:46:22] I have been removing it, what do you want me to do?
I don\'t have that phone but I have easybuy phone with me.

I can solve that problem
[21:45:09] Yes
[21:44:44] Easy
[21:32:17] How and can u help?
[21:27:57] Ok
[21:25:36] I go to sleep. But my offer is valid. I will check results tomorrow
[21:22:58] Wish I had any model just now
[21:22:12] you know the rules of this game :)
working step-by-step method against 6 months support instantly
[21:20:01] I\'ve been doing it for long
[21:19:21] +6 months CM2 support to first person who can post here working step-by-step method how to remove EasyBuy with CM2

send the method to @Marvoo217
Once he test and confirm steps I will add 6 months support
[21:19:17] +6 months CM2 support to first person who can post here working step-by-step method how to remove EasyBuy with CM2

send the method to @Marvoo217
Once he test and confirm steps I will add 6 months support
[21:17:32] If formatted will it come back?
[21:13:27] Yes I can do it
[21:12:25] Yes
[21:11:14] Paid
[21:11:06] Is it related to easybuy?
[21:09:57] How to remove security plugin for KD7, anyone knows?
[21:02:17] Thank you very much, kindly remove the -2 you gave me before
[21:01:53] Thank you for your kind research and help
[21:01:41] 2023-09 => 2024-03 done
[21:01:25] Okay sir
[21:01:03] 5F715768
[21:00:43] 60990699
[21:00:36] yes.
I am waiting for his answer now
[21:00:24] The solution came from @AllRoundLeverage
[21:00:00] Thanks!
[20:59:52] What is your CM2 S/N?
[20:59:39] Yes sir it worked
[20:59:25] is it really working?
[20:59:06] What is the dongle S/N?
[20:59:05] Solution by @AllRoundLeverage Test Point for Tecno CI6
[20:55:51] Make this https://infinity-box.com/?r=100155
[20:55:51] Hello I need where to pay from so as to fix dongle misconfiguration after use of virtual here I need to use cm2 plizzz
[20:39:14] Which phone is this
[20:34:21] your problem is with sharing tool but not with subscription
[20:33:04] no problem, we can do it tomorrow. There is no time limit for my offer
[20:32:22] fake posts are not allowed here
pls in future do not make fake posts.
you got an answer time ago https://forum.infinity-box.com/viewtopic.php?t=10738
[20:32:11] I tested it myself
[20:31:55] He is delaying
[20:31:34] My one year has expired
[20:31:17] I did is like I need subscribe
[20:30:54] Have they gotten the correct test point?
[20:29:45] ok sir!
[20:29:37] Please help us fast
[20:29:34] update dongle now
[20:29:26] Please find us solutions because almost all the phones with the recent security updates are not working anymore. Meaning most phones brom is not responding
[20:27:56] S/n 4BBB0700
[20:27:31] very good advice
[20:26:08] Please infinity team you need to fix this issues in your next updates because we don\'t need to open phone boards before a job can be done.
[20:22:53] What is the S/N?
[20:22:39] What is the S/N?
[20:01:58] I hope you will get test-point soon
Let\'s wait your result
[20:01:07] Okay.....I want to give him now
[19:59:54] you can give him test-point https://t.me/InfinityBoxTalks/132697
let he test and confirm
after that let he send test-point image here and tell me that it works well.

First person who gives him test-point will get from me + 6 months CM2 support to his account for free
[19:59:35] you can give him test-point https://t.me/InfinityBoxTalks/132697
let he test and confirm
after that let he send test-point image here and tell me that it works well.

First person who gives him test-point will get from me + 6 months CM2 support to his account for free
[19:33:28] You don\'t need resistor,
I already told you that I have seen it, not free because I had to open a new phone
[19:26:23] 2044 local sla
[19:18:29] Check dm bro, you don\'t need to connect any resistor
[19:17:17] I have it, kindly explain the 6months support so that I can drop it
[19:17:00] I\'m not blaming them, I know they will solve it with time
[19:15:32] You said 6mknths support? If I can provide the testpoint?
[19:14:42] I tested it and it worked
[19:14:30] I just open a new phone just to read it
[19:14:19] I have seen it
[19:12:52] Brother this is new security don\'t blem admin
[19:12:05] i havent seen tecno phones anytime, but it uses mtk cpu and emmc like millions of other brands 🤷 If you know how to do it help to your mate. I`m not asking for help
[19:10:26] Me too. Did you get help
[19:09:47] try
[19:09:33] Who knows this blabla?¿?????????
[19:09:23] This right?
[19:08:32] Okay. Brother
[19:08:01] I just opened a phone just to get this, I am almost there....just wait
[19:07:56] You are getting it wrong, I don\'t mean myself but others, I never killed any phones, do you know how many Tecno and Infinix phones that comes to ones way in a day? These brands are so popular in my country that everybody uses them that is the reason many people from this part of the world are buying cm2 because it\'s handle this brands mtk to be precise so cool and easy
[19:07:40] Brother please don\'t force what you don\'t know if you kill customer phone get ready to buy new please
[19:06:20] short with resistor (not just short to GND) this will save phone
[19:05:25] So am I using JTag or I should short it as test point
[19:04:14] you are engeneers not just button pressers, soupgrade skills not to kill phones, less people can do it, greater money earns
[19:02:06] Cm2 infinity team has the skills to unblock this Brom mode in this new mtk security we are facing recently, we damaging phones in the name of trying to get to the test point, we need solution without test point, every new phone and old ones with current security patch has this security.
[18:58:33] don`t you you think that it is DC-DC led driver? resisitor you point is current limiter
[18:56:14] Ok
[18:53:25] Somewhere here should be vddi, while you short it emmc will be disabled, and cpu goes to bootrom cause no preloader found
I\'v attached typical emcp connection schematics for understanding, thought that it should be easy, but i took to much time, may be easier for you unsolder flash ic and use jtag (erase frp partition) and take good photo of pcb, we will see routing of it
[18:52:30] And is showing no report found
[18:47:11] My cm2
[18:44:35] House good evening pls
X_Tigi V6 pac file needed pls help pls house
[18:43:58] Found 11 files x_tigi
1. X_Tigi_MT6580_X_TIGI_V8_8.1.0_V01_20181222_163917_O11019_k80hd_bsp_fwv_512m
2. X_Tigi_MT6580_VSUN_X_TIGI_Photo_P16_8.1.0_V13_O11019
3. X_Tigi_X_TIGI_3308_FLYCOM61D_M182_XTJ_3308_PCB01_gprs_MT6261_S00.M182_X809_V01
4. [18:42:41] Take a closeup picture
[18:42:38] Found 11 files X-tigi
1. X_Tigi_MT6580_X_TIGI_V8_8.1.0_V01_20181222_163917_O11019_k80hd_bsp_fwv_512m
2. X_Tigi_MT6580_VSUN_X_TIGI_Photo_P16_8.1.0_V13_O11019
3. X_Tigi_X_TIGI_3308_FLYCOM61D_M182_XTJ_3308_PCB01_gprs_MT6261_S00.M182_X809_V01
4. [18:42:27] Nothing found for xtigi

If you will get the file upload it to support with iosFileUploader

[18:40:52] No lol
[18:40:19] We are waiting for results brother. I want to sleep brother. Or you killed the phone??
[18:34:39] Okay tomorrow morning I will do it
[18:33:03] also preloader port?
[18:32:13] no
[18:32:09] Ok
[18:32:00] After that should I test the voltage again?
[18:31:07] try to short over 10Ohm resisitor to gnd and connect
[18:30:29] Open here
[18:30:28] Just number 1 the rest 0V
[18:29:56] all of them? 1.7v?
[18:29:42] Test point didn\'t work
[18:28:44] Number has 1.7V
[18:24:00] Okay thanks
[18:16:32] Do you have the file? If yes then enable custom setting and load the file in the fdl feed
[18:16:20] This is campany phone brother .? Not true??
[18:15:13] Some phone is done some phone failed
[18:13:22] And x6511b SPD fdl failed
[18:10:11] How I wish infinity team will solve this Brom new security on mtk without test point
[18:08:42] Do you have root access?
[18:05:11] Please infinix X6511 B TEST POINT
[17:59:17] He will find test-point
[17:57:42] This is it
[17:57:39] @fiifinana
[17:57:03] Send the picture of the phone
[17:56:59] Check here
[17:56:12] Available
[17:56:03] activation is not available any more
if you have activation already - download exe form infinity server
[17:55:54] please test point diagram
[17:55:14] please can I get the test point diagram
[17:53:09] update dongle firmware
[17:51:59] Test point
[17:51:56] Get a polishing pen remove small hole of the silver cover and do operation
[17:51:33] Check group fotos u will see it
[17:51:24] Need tp to operate
[17:50:25] tecno KG5j frp please any solution
[17:50:16] Brother you are not far from marder phone please take it back to you castomer that\'s is only solution
[17:42:57] As i understand there is a power source
[17:42:18] Ok let\'s try first that point
[17:41:57] I believe the testpoint is bidding here based on what they did on x665b
[17:41:52] tecno KG5j frp please any solution
[17:41:38] No
[17:41:02] If no bootrom mode appear u should check voltages, do you have oscilloscope?
[17:39:54] Press identify in software, connect to gnd and insert usb cable without battery
[17:39:13] Root it well bro
[17:39:03] Okay I should test the volts before connecting the resist to ground?
[17:38:06] No just while phone is switched on
[17:37:57] To Gnd
[17:35:58] After connecting the 10Ohms ?
[17:33:19] Also check voltage at this pins when phone is on
[17:32:15] Alright let me try and post results
[17:30:09] take 10Ohm resistor one pin solder to gnd, another to this pin
[17:29:56] Kindly confirm if this file :

Pixcel_frikiPhone_S135MWL_IPSTYF_DX11_20160509_MT6572_20160509_4.4.2.7z (https://infinity-box.com/?r=15&a=0&fid=16526392)

will work for iPhone i13 Pro Max clone MT6753.

It keeps poping out anytime I search for iphone 13 pro max clone

Thanks
[17:27:34] Thank you....I will try it now
[17:27:18] Admin I need Old infinity samsung module
[17:26:44] Dear admin,
[17:25:28] Redmi note 11 4g mi account remove solution.....low price
[17:25:06] no this is the placement of emcp pins, so we can predict topology of pcb
[17:24:08] Meaning I\'ll use JTag?
[17:23:47] Zoom on your phone this part with good focus
[17:10:21] Give name of flash. Was it carefully? Don\'t think so, will pray for its health
[17:09:35] More need cut
[17:08:00] I try but show no report found
[17:03:16] Make this https://infinity-box.com/?r=100155
[17:03:06] How i can fix this problem
[17:02:38] try this https://infinity-box.com/?r=100202
send sw log text
[16:51:54] And write flash name here
[16:50:43] Carefully Cut shielding around emcp
[16:50:11] What is the model name and cpu type?
[16:49:09] much more
[16:49:00] africa
[16:48:58] Tanzania
[16:48:46] not in Nigeria
[16:47:57] Yes. Tecno is quite popular in Nigeria
[16:47:27] Google already😂
[16:47:15] Nigeria
[16:46:10] Remove copper
[16:45:10] will send here
[16:45:02] nope, wait me morning
[16:44:25] Надо в Африку за таким телефоном ехать 😳
[16:43:52] Фото монитора с Д0 где?
Незачот!
[16:43:19] Охх...
[16:42:56] D0 to gnd🤔
[16:42:56] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[16:38:59] +6 months CM2 support to Hero who will post here really working test-point for this model
[16:38:17] +6 months CM2 support to Hero who will post here really working test-point for this model
[16:30:16] Please I need test point for Tecno CI6
[16:27:32] I can fix it
[16:27:17] Any problem with it?
[16:26:52] Im looking for it too
[16:26:14] what is your dongle S/N?
[16:25:23] it could be mtk.
I can\'t tell.
let me try the spd/sp2 setup
[16:23:24] what is the cpu type?
[16:22:10] TO: ADMIN
does it support HUAWEI NMO-L31 both format fs and frp??
when mt2 HUAWEI LOADER is connected, it charges the Device.
DOES IT SUPPORT???
[16:19:51] no one wants to help me with the campaign of the case, he asked for the firmware ta-1235 Russian lang
[16:01:59] Please I need test point for Tecno Camon 19
[16:01:11] Brother this work brother my be you are making mistake
[15:58:22] Please I need test point for Tecno Camon 19
[15:57:09] Tecno spark 8p frp by pass
[15:55:58] I fix easy buy 1 hand
[15:53:47] Reboot the phone and it won\'t turn on again
[15:52:57] Contact me
[15:36:15] Guys needs help to Uninstall plug-in in Kb7j
[15:26:33] Infinity please solve this issues imei not done on Android 11 and 12
[15:18:45] Frp
[15:04:02] Send motherboard
[15:02:21] Okay please can you show me thank you
[15:01:43] You need testpoint
[14:57:17] Please help
[14:57:10] Please I can\'t connect Tecno CI6 with CM2
[14:56:11] Good day
[14:44:07] Help please
[14:43:20] Help please
[14:29:15] firmware like tested help with it of you have
[14:28:50] Flash with bb5 dongal
[14:22:10] nokia rm970 solution team
[13:50:00] Testpoint needed
[13:44:33] That’s it
[13:43:40] Tecno camon 19 CI6 is not detecting bromm
[13:39:25] hello, i need firmware for nokia 150 ta-1235 with russian language
[13:37:50] It’s showing DA error
[13:33:54] здравствуйте, мне наужна прошивка на nokia 150 ta-1235 с русским языком
[13:33:25] Nothing found for camon 19

If you will get the file upload it to support with iosFileUploader

[13:33:10] Found 1 file ci6
1. Acer_MT6735_acer_T02_acer_T02_5.1_ALPS.L1.MP3.V2.3_CCI6735.35U.L1_P70

[13:32:55] Nothing found for Tecno ci6

If you will get the file upload it to support with iosFileUploader

[13:28:45] здравствуйте, мне наужна прошивка на nokia 150 ta-1235 с русским языком
[13:27:37] Ci6 Tecno Brom solution please
[13:23:07] Explain
[13:22:33] Flash boot image with correct signature
[13:21:16] Send motherboard
[13:20:41] Yes
[13:02:18] needed
[13:00:29] Iphone 11 iCloud bypass
[12:39:20] nokia ta-1352 how to reset with cm2
[12:29:46] نوكيا ta 1139
[12:29:34] السلام عليكم ورحمه الله وبركاته ممكن معاي جهاز نوكيا عاوز يتفلش ع ال best وانا معنديش ياريت لو حد يعملي شير او ياجي معاي تيم
[12:25:30] What is this error, it\'s just scanning and scanning. Please assist
[12:24:52] Tecno KG5j doesn’t identify
[12:20:12] need test point for nokia c20
[12:19:45] cm2 team user id login system option
[12:18:34] Solution for x626
[12:00:09] Ok thanks a lot, I\'m relieved
[11:57:31] Selam new
[11:56:53] Hi
[11:56:40] all info is visible at your account https://infinity-box.com/service/
[11:56:08] Type: Infinity-Box/Dongle [CM2]
S/N: F1040A47
Username: 00F1040A47
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0153; Expired: 01-Dec-2023

[11:55:37] What is \"not working\" means?
What is your dangle S/N?
[11:39:07] Hi
[11:27:45] Can you check for whether it\'s active now, because my reseller told me he has sorted the issue
[11:11:33] What does dongle manager shows?
[11:08:30] And how much can I do it
[11:07:45] Pls I have cm2 that is not working how can i upgrade it
[10:52:34] 1. read #CM2MT2 boot manual https://infinity-box.com/?r=100189

2. see test-points here http://dl1.infinity-box.com/00/?dir=test-point/
if not exist - try google and send your image here for all users
[10:51:37] Found 3 files X626b
1. infinix_X626B_H623JKN_P_200928V311
2. infinix_X626B_H623JKN_P_210127V323
3. infinix_X626B_H623K_P_ID_201015V23

[10:51:23] install good drivers https://infinity-box.com/?r=19&dir=/soc-drivers
[10:49:29] Any solution please
[10:45:41] X626b file needed
[10:39:44] how to fix driver
[10:29:58] localSLA mode not connect
[10:24:09] http://dl1.infinity-box.com/00/?dir=nvram/nokia/
[10:23:53] Thanks, it\'s passcode + frp, I\'ve done it with SLA
[10:23:14] i need testpoint tecno bd4j
[10:22:22] Can anyone please help with c1 2nd edition screen lock
[10:20:53] Now the phone doesn\'t have imei
[10:20:37] Did a wipe and downgrade but forgot to backup NV data
[10:18:48] Hello,
What is the problem with it?
[10:13:53] Please
[10:13:34] Hello, how\'s everyone doing? I need help with TA-1347 NVdata?
[10:11:32] what is your problem friend? tell me details
[10:11:14] what is your problem?
[10:08:15] answer me Pls
[09:59:35] Pls What\'s the boot for Tecno Le7 in mt2
[09:32:36] any news
[09:32:20] tecno bd4j
[09:23:16] Just interesting video https://www.youtube.com/watch?v=1nx_n-wEtII
[09:22:06] 4 years?
You can order 2 years twice
[09:19:02] Sir i already tried everything.
Can you please share link
[09:17:35] Google ✅
[09:17:05] How to open Diag
[09:16:50] diag open
then possible
[09:16:42] For screen lock
[09:16:35] Sir can you please help us about Nokia C1 2nd Edition.
Is there any update for this model?
[09:15:26] no problem
[09:15:24] ok ok. got you admin
[09:15:23] reset you can
[09:15:12] if you can add that to your bootpack folder. MAYBE
[09:15:09] as already told you
[09:15:05] frp not supported
[09:14:41] someone shared this previously. can it help our guy here???
check the attached.
[09:13:45] someone shared this previously. can it help our guy here???
[09:09:53] make like here but use preloader for your phone https://forum.infinity-box.com/viewtopic.php?t=9483

another way

get this https://infinity-box.com/?r=100202
Make [Identify]
if you will see a message like \"EMI failure\"
Right after that go to \"Cloud\" tab and click to \"Get Preloader\" button.
In case of success you will get from server file with preloaders for your phone.
Unpack preloaders and boot phone again this way: https://forum.infinity-box.com/viewtopic.php?t=9483
Of course you should select one of prel
[09:05:34] Licence renewal 4r cm2??
[08:58:45] فابل فلش نوکیا
Ta-1174
Spd
کسی داره؟
Cm2
[08:54:50] plese send me file flash nokia ta-1174 spd
[08:53:37] Lenovo xt2095-4
nvdata & nvram file plz
[08:46:05] Please share solution
[08:42:55] Have you done this with CM2 or that other software that is in the background
[08:38:39] C1 2nd Edition
[08:34:51] Easy
[08:32:59] Please help me with Nokia C1 2nd Edition Pattern and Password.
I got huge quantity of this model
[08:14:10] How
[07:34:27] Infinix x680 flashing problem
[06:09:54] Ok
[06:09:35] not need to test anything
[06:09:23] If u need test something I send ultra view
[06:09:06] Ok
[06:08:20] A035F frp not supported currently
[06:07:56] A035F
[06:07:50] Sir log
[06:07:07] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

VER : BP_R1.0.0
LEN : B7D18BB9 ( 2.87 GiB )
CPU : ums9230_4h10
VER : MocorDroidR

Open : ums9230R_SIGN.pac
VER : BP_R1.0.0
LEN : 2.87 GiB
CPU : ums9230_4h10
VER : MocorDroidR

Reading package ...
Read package finished!

Product Brand : UNISOC
Product Device : ums9230_4h10
Product Model : ums9230_4h10_Natv
Product Name : ums9230_4h10_Natv
Patch Level : RP1A.201005.001
Display ID : SL6215A_2F063_220825
Ver. Incmt
[06:03:45] Good morning

InfinityBoxTalks 2022-11-29

[23:01:34] Ok thanks
[22:56:30] I will try that, Thanks
[22:54:46] flash again
if write stil has problem you must try another base/model or check hw, it may be faulty flash chip
[22:51:53] Dm-Verify corrupt
[22:50:01] What is the problem with the phone?
Is it stuck on boot-logo?
[22:46:27] [FL]: HW verification passed

Verify device config...
Ok
No loaders to verify
[FL]: Pre-Flash backup
Backup critical data [18] to C:\\InfinityBox\\CM2MT2\\backup\\MT6580__585C0EF0E44BEF783A016518F5A8F788\\
Done
[FL]: Pre-Flash backup passed

SEC_DL: True (CUST)
SEC_DL : SECURE USB DL ENABLED
SEC_ID: 0x63616334633434326462376361623562

[FL]: Pre-Erase
Erase: 0x0000000000000000 0x0000000000080000
Erase: 0x0000000004C80000 0x0000000123B80000

[FL]: RePartition
[FL]: RePartition Ok

SecInit: LOGO
SecInit: SECRO
Sec
[22:46:27] gui: Default
S/N: 99D66A7C v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v723487 Ok

Update configuration...
Configuration [12060] updated

Load IDBase v723487 Ok
Load: C:\\Users\\Eng YOMMY\\Desktop\\B1c-VP559A-RGo-OP-211119V3\\MT6580_Android_scatter.txt
Preloader [HW DEV] Info:
EMI: MT6580 preloader_k80_bsp.bin with 3 memory type(s) supported
EMI[00] : eMMC : DDR3 : ID: 150100464536324D42 : Ven: Samsung | Dev: FE62MB : RAM: [ 1.00 GB ]
EMI[01] : eMMC : DDR3 : ID: 70
[21:35:51] Turn off your antivirus, restart software and retry operation
[20:27:11] https://www.youtube.com/results?search_query=cm2+tecno+kg5j
[19:58:41] Afternoon,tecno kg5j frp how to do with cm2 please
[19:50:48] Ok
[19:44:47] also you can see here https://www.youtube.com/infinitybox/playlists
[19:43:55] That\'s gud I\'m very appropriate to be member on this group
[19:40:31] Found 15 files ta-1139
1. nokia_210_2019_210_TA_1139_here
2. nokia_210_2019_TA_1139_40.01.11_TA_1139_IC_40.01.11_059Z0X8_arabic_english_french
3. nokia_210_2019_TA_1139_20.00.11_TA_1139_EI_20.00.11_059Z0X8
4. nokia_210_2019_TA_1139_1
[19:39:13] ta-1139/file
[19:38:44] ta-1139
[19:33:49] click here https://www.youtube.com/results?search_query=cm2+tecno+ke5

later you can try yourself
[19:33:28] ok, wait, I will teach you
[19:33:08] Do you know youtube?
[19:32:01] Ok thanks 🙏🙏
[19:30:51] supported well
you must check drivers and use test-point
[19:29:40] Tecno spark go 2021ke5
[19:28:32] model?
[19:28:21] Any infinix and Tecno MTK
[19:27:11] what is ur prublum?
[19:26:43] model name?
[19:26:08] 2.37
[19:25:48] installed cm2 version
[19:24:59] Help me
[19:24:18] Windows 10 64bit
[19:23:20] Your phone is mtk and not spd
[19:22:01] give me info!
[19:21:48] good
[19:21:30] where is your result?
I am tired to wait
[19:18:55] Nothing found for Venus Z90

If you will get the file upload it to support with iosFileUploader

[19:18:45] what is your installed exe version?
[19:18:26] you must select different loaders and try

do it, don\'t be lazy!
[19:15:40] Venus Z90 room
[19:14:48] Please I don\'t understand full meaning of that (ver)??
[19:14:16] They are not working for the phone
[19:13:30] Tecno kh6 bootlooder
[19:11:49] What?
[19:08:16] Spd
[19:08:09] !!!
[19:08:07] Hi
[19:08:07] Admin
[19:08:02] I need tecno kh6 boot loader
[18:44:43] what is cm exe ver?
[18:29:10] HELP now
[18:24:56] Only MTK showing this error
[18:23:38] MTK tool
[18:23:29] Win 10 64bit
[18:21:21] exe ver?
[18:20:26] Please I need help it is ugent
[18:11:47] working
[18:05:38] Any news about update for qualcom, we tared watting
[18:01:20] Will send u tomorrow sir
[17:46:16] Whaoooo

You gave me that just because I refused?
I killed a phone just because I was looking for solution.

Now I have to give it out for free?
[17:45:38] here is Infinity group
any kind of private business advertizing is not allowed
last warning
next action - ban
[17:44:25] I will need to make my money first before pasting it here.
[17:43:45] nice
I am waiting for an image here
[17:39:12] I have it brooooo
[17:37:47] try this https://www.youtube.com/watch?v=MjYuRQywRuQ
[17:33:09] X665b working testpoint available
[17:25:58] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[17:25:38] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[17:16:44] A035F REST DONE FRP STILL ON CAN U ADD THIS IN MEMORY TOOL WE CAN ERASE FRP PARTITIONS
[17:11:58] Spd 9832
[17:11:11] Chips?
[17:09:04] What failed?????????
[16:58:47] PRESTIGIO pmt 1157 pack fail
[16:58:34] Ok, my reseller promised me it will be sorted out today
[16:57:58] Rom pack
[16:57:32] Please help
[16:57:20] Hi
[16:24:21] Can you please share here ❔
[16:06:05] S/N F1040A47
The only support renew was ordered 2021-08-17 09:04:32 - Infinity-Box/Dongle [CM2] 1 year support renew

Right?
[16:03:46] September 2022
[15:56:35] why?
Support expired 2022-04-01, it\'s about 6 months ago. That\'s why server decline your request.
[15:56:23] can u check my server logs
[15:56:18] Brother please you account it expired that happens to me tru
[15:55:59] it may works for expired account that expired 2-3 months ago
6 months is too much
[15:55:59] yes but ido some days before
[15:55:04] buts before password change how its work on expire support
[15:52:36] yes it\'s free
Support expired 2022-04-01, it\'s about 6 months ago. That\'s why server decline your request.
[15:51:25] in this post wits show rsa authentification is free
[15:50:37] https://forum.gsmhosting.com/vbb/14416939-post1.html
[15:50:03] Reset password or e-mail here https://infinity-box.com/service/\r
\r
Click here https://www.youtube.com/watch?v=KogYDEkg-O8
[15:50:03] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : BD2-OP
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL
[15:48:59] Nothing found for s663l

If you will get the file upload it to support with iosFileUploader

[15:48:35] Found 3 files itel s18
1. Oukitel_OUKITEL_C12_Plus_MT6739_8.1.0_OUKITEL_C12_Plus_V1.0_S181106
2. Oukitel_Oukitel_C12Pro_V10_S181113
3. Oukitel_Oukitel_C12_Plus_MT6739_8.1.0_OUKITEL_C12_Plus_V1.0_S181106

[15:47:56] Found 40 files s18, search limit is 20 files per server
1. Spice_M5460_S18_20120227
2. Spice_M6112_6531CA_12B_GC790_XLL_A10_128X64_272X480_M1_V18_chandanps18
3. Haier_MT6572_alps_CB514_Android_4.2.2_G307_ZX_D1_S18_HAIER_MEXICO_S20140528_Z23
4. [15:47:30] and what is the problem now?
[15:46:54] here is log for sucessfull report before password changed
[15:46:07] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : L6502
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL .
[15:43:34] No
[15:43:18] so you must enter good password to software
[15:43:12] its woking with expire support
[15:42:54] but before password change iused
[15:42:29] Same problem?
renew support
[15:33:26] before change password all working fine
[15:32:56] after change ios account password
[15:32:27] same problem
[15:30:25] any supporter ?
[15:24:31] You account it expired
[15:17:28] Help
[15:17:20] Hi
[15:17:12] Try Another boot bro
[15:14:41] I am connected
[15:13:12] Sorry I\'m not an admin but it worked for me
[15:12:23] Try to be connected to the internet
[15:09:18] I\'m tryna do a job and I wanna connect to server. This is the reply
[15:08:38] what is \"not working\" means?
[15:08:13] https://infinity-box.com/?r=100199
[15:06:05] After identify fully turn on the phone
Turn off do what you want.done super cm2
[15:04:03] Diag
[14:03:22] No
[14:02:53] 🙅‍♂ no
[14:02:52] Nokia 1410
[14:01:30] Status :Locked! Server unlock requered!
Connecting to server
Connected
Init failed Wrong input data

Error: Operation fail
Check previous message for more info!
[13:55:22] Can cm2mt2 repair samsung A125f imei?
[13:53:50] Which
[13:53:20] I need it pls
[13:47:48] Yes sir
[13:46:01] Nokia 1410 Support Unlock?
[13:44:49] Do you have??
[13:42:11] Ok
[13:41:51] In need frp tool for y9s Huawei
[13:10:58] yes
[13:05:08] https://forum.gsmhosting.com/vbb/f296/world-1st-a035f-pac-file-write-done-3092192/#post14689062
[13:03:27] Hello
[12:41:30] Bd4h test point please
[12:33:05] Gsm someone should help out now
[12:32:48] Not working
[12:32:19] What happened to it?
[12:27:32] Tecno kh6
[12:27:06] Hello
[12:25:44] Where is the address?
[12:16:14] check it carefully
if it\'s not clear you may use SEARCH too
[12:15:43] check sw log file, you may see info there
[12:15:13] Or he need to flash latest ver of persian language, not old ver than which was installed before
[12:15:08] Not visible enough from the video you sent
[12:14:24] Bd4h test point
[12:14:16] I don\'t know what it was
[12:13:58] Someone should explain this want to me, because I have identified the device three times but still having the same error (tecno Spark 8c kg5k
[12:12:47] flash back with the same firmware vers as it was in phone before
[12:11:05] I wanted to change the language, when I flashed the Persian file, it turned off, now it gives the same error
[12:09:51] try it and let me know
also you may send here good quality photo of tested point
waiting
[12:09:21] what ithe prob with the phone?
[12:04:04] I also tested a new battery and it still gives an error
[12:03:06] N try again
[12:03:00] First
[12:02:56] Login in 2 iOS web
[11:58:39] I have many questions
you must answer to first one now
[11:55:29] It means that it is possible that the problem is with the battery, I don\'t have a multimeter to check
[11:51:54] https://www.youtube.com/watch?v=MjYuRQywRuQ
[11:51:48] nokia g21
[11:46:32] what is battery voltage?
[11:45:44] send sw log for cm2sp2.exe identify
[11:45:02] run CM2SPD.exe and CM2MK.exe
[11:44:34] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[11:31:37] X665B test point pls
[11:19:19] Open VPLfile : TA-1017_059Z1Z3_10.00.11.vpl
Description : TA-1017 IJ
DeviceType : TA-1017
ProductCode : 059Z1Z3
SoftwareVer : 10.00.11
PPM LangPack :
[1] : Urdu (Islamic Republic of Pakistan)
[2] : English (United Kingdom)
Load Ok!

Operation : Write FirmWare [ v1.20 ]
Setting : UserData erase : True
Setting : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial P
[11:17:09] ??
[11:12:42] A3 core
[11:12:04] MODEL?
[11:03:53] Cm2 pleas add t606 chip unisoc(spd)
[10:56:23] Cm2 spd and sp2 unable to recognize & read & write dump &repair imei spd keypad phones
But cm2 SCR just able to identify & format fs & read usercode & repair security in svc(diag) mode
This SCR module have not read/write option for keypad spd phone
Please sovle
Thank
[10:53:33] admin please do something or if there\'s a any way guide me
[10:52:31] to be honest im not enjoying this infinity box i cant even remove kg lock on mtk chipset phone 😔
[10:51:37] Hi
[10:45:29] Help me my support
[10:27:31] Nokia c1 ta 1380. I need hard reset with cm2
[10:20:28] Who can guide on how to successfully root mt6580 chipset, android 11, I can root other mt67 series
[09:30:54] The ones I tried didn’t work
[09:30:35] Pls I need to know the boot of this phone
[09:27:20] hi
infinix x6812 brom test point help me
[09:24:18] what?
[09:16:44] apple id 8
[08:56:12] thank you infinity team
[08:55:29] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : Blade-P600-Optus-X-Sight-2
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL :
[08:21:03] if you can not boot phone even with test phone - it\'s a problem.
anyway you may try this https://infinity-box.com/?r=100202
[08:19:07] try with another loader selection
you my use original PAC file as loader
[08:18:02] No need test point, just try with another loader selection
[08:17:04] install cm2sp2 boot-pack and try different zte loaders
[08:14:56] model name?
[08:13:35] i need dc9863A fdl for 4gb 128gb
[08:11:54] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[08:11:54] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[08:10:16] Dígale diag mode try frp With flashmode
[08:09:38] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset Settings [ Format FS ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData
>>> INFO : FRP reset require FlashMode!

Reconnect Power/Cable!

Done!
Elapsed: 00:00:14
[08:09:36] zte blade v30 vita wipe userdata done but frp locked
[08:07:15] hi
i mean flashing done by research download tool and problem solved.
[07:41:50] Lock bootloader
[07:27:56] We are waiting the solution like test point
[07:26:43] This problem is New security prom easy buy and ok card if update the phone system update go sho this problem kg5k and x6511b
[07:23:41] Your phone is easy buy problem
[07:21:24] Yes I now SPD
[07:17:58] The phone is spd
[07:17:13] This new problem like berom error if u fine some phone go work normal
[07:07:16] Installed v2.38 Latest v2.37 Required card v0153
No updates found

Update configuration...
Configuration [12060] updated
Load IDBase v723487 Ok
Load: D:\\CEL\\SAMSUNG\\A326B\\B4 - SCATTER REPAIR\\MT6853__Android_scatter.txt

Operation: Write Flash [ v2.38b7 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Wait...
[+] Update PMT [re-Part]
[-] Checksum Verify
[-] Safe Erase [Upgrade]
[-] Check compatibility
[-] Backup
[-] UserData Safe
[+] FLASH FORMAT

Files: 18
[FL]: D:\\CEL\\SAMSUNG\\A326B\\B4 - SCATT
[07:07:15] full erased phone, possible to fix?
[07:05:34] Solution on this please
[05:44:41] Nothing found for adb driver

If you will get the file upload it to support with iosFileUploader

[03:10:48] Pretty sure , maybe you tell me will depend with some mtk module versions someone is using.
[02:12:15] Hello
[02:10:07] Hi

InfinityBoxTalks 2022-11-28

[21:02:41] cpu?
[20:38:15] NEE REMOVE ACTIVATION
[20:37:29] any fo help fr RCA TABLET VOYAGE 3
[20:33:27] Your video added to list https://infinity-box.com/?r=50
[20:28:49] are you sure?
[20:27:57] it\'s something with your PC after windows update
check https://www.google.com/search?q=0x0c000007b
[20:01:09] If this testpoint work it means u don\'t need it ,just connect the phone without holding any keys and will work, using Raphael 2 it\'s an older version ,
[19:56:09] Same issue that am facing, admin pls help us
[19:50:50] The new android update on kg5j does not work with the loaders on cm2 even using the above test point
[19:45:35] try the same operation again.

another way: get this https://infinity-box.com/?r=100202
Make [Identify]
if you will see a message like \"EMI failure\"
Right after that go to \"Cloud\" tab and click to \"Get Preloader\" button.
In case of success you will get from server file with preloaders for your phone.
Unpack preloaders and boot phone again this way: https://forum.infinity-box.com/viewtopic.php?t=9483
Of course you should select one of preloaders that you got from the server
[19:40:13] Ok i check
[19:39:56] Try here @FlashFileSearchBot
[19:39:56] Hello need file of flash this acatel
[19:39:28] Make this https://infinity-box.com/?r=100155
[19:38:59] 1. read #CM2MT2 boot manual https://infinity-box.com/?r=100189

2. see test-points here http://dl1.infinity-box.com/00/?dir=test-point/
if not exist - try google and send your image here for all users
[19:38:38] https://forum.infinity-box.com/viewtopic.php?t=9483
[19:35:53] you are using v2.31 but latest is 2.37 and even this exist https://infinity-box.com/?r=100202
[19:30:54] try default loader selection
result?
[19:30:16] not true
[19:27:49] you DID NOT renewed it ate september!
Your last renew was 2021-08-17
you must call to your seller
[19:26:02] what is the problem with your seller?
[19:25:11] september 2021?
[19:24:35] support for your dongle expired 3 months ago
server functions may not work
you should renew support
[19:20:08] you must install good drivers https://infinity-box.com/?r=19&dir=/soc-drivers
[18:53:41] Which phone
[18:39:10] Please I need help my MTK tool not work
[18:24:50] I go to reset and it say wrong email
[18:22:19] you must enter good password
get or reset here https://infinity-box.com/service/
[18:12:47] Get correct username and password brother
[17:48:48] what could be the problem
[17:48:17] i have infinity box activated cm2 but every time says wrong username or password product 908 declined
[17:46:34] hello
[17:41:04] I have this
[16:51:38] Kk bro
[16:47:39] We have closed and the customer already took the phone so I will look for another spd phone and test tomorrow
[15:51:45] Work
[15:51:43] Did it wotk
[15:49:03] Ok thanks
[15:48:46] Ur activation is on
[15:48:39] Ur dongle is still working
[15:40:22] This is what I saw as I logged in
[15:35:26] Am still looking for BLU R1 HD test point or tested DA file
[15:30:35] I was restricted from server operations, which made me to activate/renew my dongle and since then I have been doing server operations till now
[15:24:05] I have signed in, now what next bro?
[15:10:29] There
[15:10:25] Sign in
[15:06:59] Type index of cm2
[15:06:42] Yea
[15:06:30] Give me the link bro, and we\'re you able to solve yours?
[15:04:45] First
[15:04:43] Sign in to web iOS
[15:04:37] U gats
[15:04:17] Bro d same happen to me
[15:01:44] Your card firmware is still 153
whatever the version which need 153 card version can use (except server operations)
[15:01:22] Den login ur details
[15:01:07] In cm2
[15:01:03] First type iOS web login
[15:00:28] Please guide me
[15:00:08] If I have not renewed how was I able to update to 2.37?
[15:00:05] Reset ur username and sign in again
[14:59:43] U unlock bootloader
[14:56:49] I can\'t use spd module
[14:56:31] I was receiving this error before I made the activation like two months ago and after activation everything was ok till today that I noticed the error
[14:55:28] This is the error Im seeing and I activated it on September
[14:50:20] and no renewal made till now
[14:50:04] i can clearly see it\'s expired
[14:49:38] What kind of error
[14:46:24] Contact me later
[14:45:59] Infinity team should answer me, I have contacted my reseller and he said the error is from infinity team
[14:44:15] tecno kh6 nvram needed pls
[14:35:43] Ok
[14:35:36] No that\'s wrong bro, then contact the reseller
[14:35:13] You can also contact @Abdulwasii_remote_tech_service for renewal thanks in anticipation 🤝
[14:34:57] I just renewed it this September, what is wrong?
[14:34:03] Type: Infinity-Box/Dongle [CM2]
S/N: F1040A47
Username: 00F1040A47
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0153; Expired: 18-Aug-2022

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period - https://infinity-b
[14:33:42] Your license is expire bro needds to renew It, for latest function to work as expected 💯✅👌
[14:33:03] Your license is expire bro mends to renew I for latest function to work as expected 💯✅👌
[14:32:30] Please I need urgent response
[14:32:19] This is the error I\'m getting while trying to use spd module
[14:31:51] Test point help
[14:31:43] X665b
[14:31:22] Type: Infinity-Box/Dongle [CM2]
S/N: F1040A47
Username: 00F1040A47
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0153; Expired: 18-Aug-2022

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period - https://infinity-b
[14:29:57] Need unlocked nvdata..nvram etc
[14:27:34] I need you to verify my username for me, and tell me if has expired or not, I renewed it on September 2022
[14:24:28] a035f loader available or no
[14:23:30] What exactly do you need
[14:22:36] I need urgent reply please
[14:18:58] I renewed my cm2 September but today I started seeing fdl error in cm2 spd about my cm2 been expired August 18 2022 this is my username 00F1040A47
[14:12:15] Found 1 file itel a56
1. itel_A56_W6004_SP591_9.0_OP_V014_20201017

[13:37:45] Alcatel 5007U how to unlock network
[12:59:02] Found 4 files TA-1174
1. nokia_105_105_TA_1010_TA_1034_TA_1037_TA_1174_TA_1203_here
2. noname_copy_M915F_7_PCB01_gsm_MT6260_S00.M915F_7_V1_copy_Nokia_TA_1174
3. noname_copy_M118_61D_PCB01_gprs_MT6261_S00.M118_IJ_191221_V01_copy_Nokia_TA_1174
4. [12:13:46] Tecno le6 test point pls
[12:13:21] Le6 test point pls
[12:07:15] Thanks
[12:00:18] KF7J
[11:59:35] use original file to flash
[11:54:02] Pls what the course of this after full flashing with cm2,infinix 688b
[11:39:21] Get factory signed firmware bro and repeat operation
[11:27:11] Found 2 files KF7J
1. tecno_KF7j_H696RTAjAk_R_OP_210820V452
2. tecno_KF7j_H696RTAjAk_R_OP_211013V460

[11:27:10] Kg5j
[11:26:48] For KG5J
[11:26:14] Test point required bro
[11:21:43] I also have KG5J SAME PROBLEM TO CONNECT WHILE HOLDING VOLUME BUTTONS
[11:21:22] need this file with password

https://support.halabtech.com/index.php?a=downloads&b=file&id=674176
[11:19:07] Please help
[11:19:00] How do I use preloader file or test point
[11:17:40] Test point required or try using preloader file
[11:12:16] PLEASE SOLUTION
[11:12:08] KF7J DID NOT CONNECT WHEN I HOLD VOLUME UP AND DOWN
[11:07:11] What\'s wrong with my dongle?
[11:06:10] help@infinity-box.com
[11:06:00] Send a direct message here help@infinity-box.com
[11:03:12] Network Unlock
[11:00:33] 👆
[11:00:21] Click here and send pics
[10:59:50] Retry operation
[10:52:11] nokiac30 frp solution
[10:48:06] FLASH FILE
[10:47:48] Tecno pop 6 go be6
[10:44:31] please help
[10:44:06] Nothing found for tecno BE6

If you will get the file upload it to support with iosFileUploader

[10:44:05] i need to transfer my cm2 activation from my lost card to a new one
[10:43:33] Found 25 files BE6, search limit is 20 files per server
1. xiaomi_Mi_6_sagit_global_images_V10.0.1.0.OCAMIFH_20180905.0000.00_8.0_global_7ce4be65b4
2. nokia_RM_1019_01068.00023.14295.43001_059W353_6BE66BC4_CustomerNvi_01068.00023.14295.43001_10022_7b0496a925c1d8a35f9554763f6eaa4c.nvi
3. nokia_RM_1019_
[10:43:02] Tecno BE6 FLASH FILE
[10:42:44] Please help
[10:15:18] Found 2 files X6511b
1. infinix_X6511B_F6318_11.0_OP_V026_20211027
2. infinix_X6511B_F6318_11.0_OP_V022_20210926

[10:13:28] Nothing found for X6611

If you will get the file upload it to support with iosFileUploader

[10:12:57] Nothing found for X6611b

If you will get the file upload it to support with iosFileUploader

[10:06:01] Vivo y1s test point
[09:40:31] What do intend to do on the phone
[09:29:08] Who has solution to this network unlock
[09:00:37] How to solve
[08:59:38] Hi
[08:56:01] I think they did worldwide unlock on the phone b4 hence the network issue
[08:54:58] Ok
[08:53:45] You need service bro not me
[08:51:42] Ok, you can use chip if the network locked provider service fee will be much
[08:51:17] In box
[08:50:06] Alright noted ✅
[08:49:39] Done?
[08:49:17] we already have eng pac for such model Bit1 and Bit2
[08:49:14] Lagos, Nigeria
[08:48:52] Sure, your location?
[08:48:37] A035F LOADER
[08:47:50] Is there any chip available for iphone 6 network
[08:47:16] 🧑‍💻
[08:41:54] Go to root folder 📂/ infinity-box/tools install lib and retry
[08:39:51] Model?
[08:38:17] Logs ?
[08:36:47] Help me nokia C20 I try to open network lock but giving error
[08:35:15] Hi how to read pin code hol u19 with cm2??
[08:34:52] Ask for code ❔
[08:29:08] Only my cm2mtk2 tool showing this error
[08:20:30] nokia c20 i try to open network lock but giving error
[08:20:01] MT2 will connect, only on flashing
[08:04:08] Samsung A13 mkopa remove. anyone help
[07:58:53] Kg5k
[07:58:22] Which phone a you trying to solve?
[07:57:53] Model of what?
[07:56:52] Model?
[07:48:28] Pls who can help me fix this, my MKOPO ADB is no longer working
[05:22:02] Found 3 files Kg5k
1. tecno_KG5k_F062_11.0_GL_V034_20220214
2. tecno_KG5k_F062_11.0_GL_V040_20220328
3. tecno_TECNO_SPARK_8C_KG5k_F062_11.0_GL_V62_20220715

Channel - Group Chat
[05:20:57] Found 3 files Kg5k
1. tecno_KG5k_F062_11.0_GL_V034_20220214
2. tecno_KG5k_F062_11.0_GL_V040_20220328
3. tecno_TECNO_SPARK_8C_KG5k_F062_11.0_GL_V62_20220715

Channel - Group Chat
[01:22:13] RENO 6 5G PEQM00 i can\'t remove Oppo ID
[01:21:45] Operation : Reset Settings/Format FS [ v2.35 ]

Mode : SMART RESET EXTRA

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek USB Port_V1632 (COM14)
MODE : BOOTROM
PORT : 14
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Montrose
TYPE : MODERN [RAPHAEL]
BROM : MEID : 0697F5BDD866EC190BF1BF41AD4E1496
BROM : SecLevel : 0x00000
[00:22:58] Please I need firmware for uniscom 3g tablet mtk firmware.
Unknown baseband problem

InfinityBoxTalks 2022-11-27

[20:57:50] Model?
[20:40:23] Nothing found for kg5p

If you will get the file upload it to support with iosFileUploader

[20:40:02] Found 1 file kg5j
1. tecno_kg5j_test_point.jpg

[20:19:38] Can\'t find this boot how do I find it plus??
[20:09:41] It worked as charm
[20:08:26] https://youtu.be/F00P30xkTRU
[20:01:26] How do i Uninstall this from my phone?
[19:39:46] Vivo y21 TP
[18:49:11] Select preloader from firmware
[18:49:11] Use petrounlock web site
[18:48:56] Right click on dat uninstall it and Bam it works
[18:48:12] How can you get best activation on cm2
[18:47:31] Uninstall d qualcom driver and try again
[18:17:10] I install but cm2 qlm dont recogniz
[18:09:58] SMD | MINA | IREMOVAL PRO

RESELLAR PRICE AVAILABLE

Bulk Orders More Cheap Price
Please Login To Your Account For Prices
[18:09:24] at first install SoC drivers https://infinity-box.com/?r=19&dir=/soc-drivers
[18:09:02] Vivo y21 test point
[18:07:23] What is problem?
Pls help
[17:42:02] run CM2MTK.exe but not CM2MT2.exe!
[17:38:49] Install miracle box all in one driver is working here
[17:04:13] They aren\'t even being detected
[17:02:46] feature phones - run CM2MTK.exe
[17:02:04] Look show me where to see these models in that list,
[17:00:37] It-fly...its not in the list, china feature phones
[16:46:31] It an mtk or spd oppo or quadcom send your log here
[16:38:58] Found 3 files kg5k
1. tecno_KG5k_F062_11.0_GL_V034_20220214
2. tecno_KG5k_F062_11.0_GL_V040_20220328
3. tecno_TECNO_SPARK_8C_KG5k_F062_11.0_GL_V62_20220715

[15:46:50] Meizu m1e boot
[15:46:36] Meizu m1e da file
[14:14:58] I think have to use other tool😔
[14:14:29] Ok
[14:13:34] No
[14:13:29] Oppo A12 imei damaged 111111
Possb by cm2 ..? Pls
[14:08:33] Monticello R7 flash file
[13:57:20] Now I\'m able to login
[13:52:14] 0062D4401A
[13:47:11] Please help me with the file link of Xiaomi Redmi 2 (2014816)
[13:42:25] Oppo A12 imei damaged 111111
Possb by cm2 ..? Pls
[13:28:42] post password or get ban in 15 min
[13:27:40] He advatice his business here
[12:30:38] Reset password or e-mail here https://infinity-box.com/service/\r
\r
Click here https://www.youtube.com/watch?v=KogYDEkg-O8
[12:30:38] Card found : AF4BB58D , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device,
[12:25:26] post password now
[12:25:20] Zip code
[12:24:03] Username?
[12:23:44] you are using v1.25 but latest is v.237 or even this https://infinity-box.com/?r=100202
try latest ver
result?
[12:22:36] https://t.me/cm2_fr
[12:03:45] I only received it like that
[12:03:29] I wasn’t the one who worked on it first
[12:02:49] restore original efs
[12:02:39] 🔥🔥🔥 Infinix X665B HOT 12i tespoint available 👇🏾👇🏾👇🏾 🔥🔥🔥

https://mega.nz/file/tSYlBA7A#ynBekhHIBW5pZFDSFR99Ph5amWT4RJGOeJQAipIunLg
[11:57:58] Received this A025f U3 No imei.. I rooted but turns out z3x and chimera don’t support imei repair on this model yet..
[11:43:32] mi 10t apollo bironkishiga kelsa aytingla resistor korish kere edi
[11:38:37] No flash tool?
[11:35:16] Need isp method
[11:31:23] Samsung ao2core
[11:30:40] Please help iwant to remove mkopa permanently
[11:29:35] Good day Admin, I\'m failing to login on my infinity account on web portal, So I have requested a password reset and no password reset confirmation comes to registered emai, even in spam folder. I have entered correct credentials but the system is refusing to authenticate, Kindly advise any way forward to recover my password
[10:19:28] Please how do I make InfinityBox CM2MT2 v2.37 recognize Scatter file?
[10:18:44] Hello Admin
[10:14:01] Tecno T528
[10:13:43] Model de telephone que vous vous le repare
[10:09:47] Bonjour ! Comment allez vous ?
J\'ai besoin de votre aide, j\'ai l\'habitude de reprogrammer les téléphones mtk avec miracle box mais ce matin je me suis heurté a un problème avec le tecno T528
Mon box n\'arrive pas à faire la programmation. Je vais supprimer le firmware de l\'ingénieur (totale format) pour installer un nouveau firmware. Quel logiciel pour effectuer l\'opération de Total format. J\'ai essayé avec Sp_Flash_Tool mais ça marche pas sauf le format simple

Merci
[10:09:27] Uninstall and reinstall it back ..
[10:08:48] Yessir
[10:05:57] Only mt2 ...?
[10:04:02] Double check, you\'ll see operation.text file
[09:49:34] NO FOLDER OPERATION.LOG FILE
[09:45:28] Patched lifetime plan for PC
[09:38:58] see available nvram files here http://dl1.infinity-box.com/00/?dir=nvram/
[09:37:25] Please admin can I get NVRAM for item p
[09:33:53] 😂😂😂😂
[09:33:15] Leave it
he has problem with reading but not with network
[09:32:34] it\'s very easy to install sharing tool but it\'s not so easy to fix it
you must wait
[09:31:42] Is network problem
[09:31:29] see available nvram files here http://dl1.infinity-box.com/00/?dir=nvram/
[09:29:58] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[09:29:44] Disable
[09:29:34] bad luck you have score -4, ban is on the way
[09:28:08] Sign In to your account https://infinity-box.com/service/
go to Products menu and select DTPro there.
Also you can ask any seller to do that https://infinity-box.com/buy/
[09:27:08] Post problem details to support forum https://infinity-box.com/?r=8
- device name
- information about the problem with the device
- software operation text from log file https://infinity-box.com/?r=100199

Do not attach images there but only copy/paste software log text
[09:26:47] Hello admin how to fix this problem
[09:25:19] you will get ban next time
[09:24:38] Unlock
[09:24:01] Found 1 file x624b
1. infinix_X624B_H8026IJK_O_201203V415

[09:23:51] Found 3 files Infinix hot 7
1. infinix_SP7731GEA_HDR_sp7731g_1h10_6.0_J5_7731G_32_8_720_1440_X29_HOT_8_WELCOME_V01_20200708_HOT_8_Qnet
2. infinix_X557_H807AD_N_171110V163_NRD90M_MT6580_Infinix_HOT_4_7.0
3. infinix_X556_H371A_N_190402V235_MT6737W_Infinix_HOT_4_Pro_X556_7.0

[09:04:06] Have you done it b4?
[08:49:05] Any solotion
[08:45:22] Any one with Infinix hot 7 files
[08:45:05] Com.securite.com wont uninstall tecno spark 8c
[08:43:08] Good! I like this
[08:42:29] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[08:42:29] Inbox
[08:40:35] Help please
[08:28:02] Whatthe solution
[08:27:40] Admin plz
[08:27:37] No help
[07:36:04] Internet got connected
[07:31:56] Help network unlock code for Alcatel
[07:30:04] Connect internet
[07:29:39] Does someone have ever helped by this group before ??
[07:27:19] Hello
[07:08:45] Team what is issue
[07:08:37] Hey
[07:02:32] How to activate DT PRO TOOL WITH INFINITY IOS???🙏🙏🙏
[06:58:22] My dongle activation is active but am getting this error when try to boot infinix hot 10i or pr652
[06:52:17] Help please
[06:35:30] Kk
[06:35:00] Full model number p651w
[06:34:39] Please am looking for p37 NVRAM anyone please 🙏
[06:33:48] Still waiting since yesterday please help
[06:32:50] Thank you
[06:22:20] Help me to fix SN 3B52173D
[06:07:02] Renew YOUR ACTIVATION
[05:16:21] Yor Activation it\'s expired brother
[03:07:21] Cm2 qc tool 1.16 for update tool
[02:28:59] This Model Is Done Boss
[02:23:13] Ur activation don\'t expire
[01:44:10] You system VGA is not compatible with the Windows you install on it
[01:34:28] but my password and my username are ok! Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v723487 Ok

Update configuration...
Configuration [12060] updated

Load IDBase v723487 Ok
Operation : Authentication [ v2.37 ]

Authentication...
Account is Ok
Balance: 0
Support: cm2: 2022-04-19; bst: 2020-07-01;

Telegram Channel: @InfinityBox
Telegram Group: @InfinityBoxTalks

Account: https://infinity-box.com/service/

Ok

Done
Elapsed: 00:00:39

InfinityBoxTalks 2022-11-26

[22:55:28] What this does means pls.
[22:42:51] Guys i formart flashed tecno spark 8c Security.com remains in tecno kg5k android 11.. Halab and eft fails
[22:13:56] Bt the drivers are installed
[22:01:50] Infinex x665b frp any help pls
[21:41:41] Check smart card drivers on device manager
[20:58:06] can i use cm2 to repair oppo A16k imei
[20:46:39] My dongle is connected bt I still get this pop up
[20:37:31] Tecno CI6 vnram need 🙏🙏🙏🙏
[20:23:30] https://youtu.be/F00P30xkTRU
[20:11:04] infinix smart x5010
[20:09:55] infinix x5010
[20:07:56] Model?
[20:06:06] Provided it’s not stolen dongle
[19:30:44] Hello Admin, do you think it\'s a good idea to buy a second hand cm2
[19:17:29] A035f loader need
[19:01:47] check end of this logtext
[18:57:53] or ERASED
[18:57:39] says device damaged or .....
[18:55:24] if you formatted whole wlash you may try to write flash now
[18:54:44] ☝️☝️☝️
[18:49:44] Thanks❤️
[17:32:10] it was successful.
it formatted whole flash
[17:31:23] the device hanged on logo
I tried fs format.
what could be the problem=== [24-11-2022 21:20:51 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===
S/N: 601556E4 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v312457 Ok

Server unavailable
Username or Password is wrong - set it via Settings
https://infinity-box.com/?r=100166

Load IDBase v312457 Ok
EMIBase: C:\\FILES\\MT6580Infinixnfinix_X5010090M__finix-X5010\\preloader_zaw878_infinix.bin
EMI: MT6752 preloader_zaw878_infinix.bin with
[17:26:23] Yes i have
[17:19:31] Good!
[17:18:59] > Support expired 2022-04-19 please renew it

Your dongle support period is expired.

If you have credits at your Infinity Account see top menu and order renew. It takes about 7-8 minutes.

If you have no credits - contact to any seller https://infinity-box.com/buy/
Send your dongle S/N to seller
Order [CM2] support renew for 1 or 2 years

How to check support date - https://infinity-box.com/doc/?r=17
[17:18:51] Platform Flash
Security Service Settings
Product Name: fu _k65v1_64_bsp
Patch Level: QP14.190711.020
Display ID: QP1A.190711.020 release-keys
SW Version: compiler11171808
Ver. CodeName: REL
Ver. Release: 10
Sec. Patch: 2020-11-01
Build Time: 17.11/2020
CPU: arm64-v&a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-vBa
Product Info: k65v1_64_bsp
SW: fulL_k65v1_64_bsp-user 10 QP1A.190711.020 compiler11171808 release-keys
Product Board: R$5v1_64_bsp
Board Platform: mt6765
Product Manfct : Vivo
MT6765 v
[17:18:44] Here is info of maine phone
[17:17:38] May be Vivo 1940 and 1938n same firmware
[17:17:31] in this case you should try with other server or with google
[17:17:10] what is the problem with the phone?
[17:17:06] I was check there is not available
[17:16:18] you must buy Infinity Dongle
[17:15:47] Nothing found for Vivo 1940

If you will get the file upload it to support with iosFileUploader

[17:15:19] okay
[17:14:51] try this https://infinity-box.com/?r=100202
[17:10:16] testpoint
[17:07:54] a21s test point
[17:02:48] invalid pointer operation ..... pls I need help
[17:01:57] === [26-11-2022 17:54:53 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===
S/N: 563939B5 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v723487 Ok

Update configuration...
Socket Error # 11002

Finished

Load IDBase v723487 Ok
Operation : Reset Settings/Format FS [ v2.37 ]
Mode: SMART RESET

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port (COM5)
MODE: BOOTROM
PORT: 5
Waiting BOOT ack...
BROM: Skip A
[16:58:05] Found 4 files redmi 9t
1. xiaomi_eng_rom_Redmi_K20_Pro_Mi_9T_Pro_erase_NV_eng_rom
2. xiaomi_redmi_note_9t_cannong_MT6853_ED5F7B3DEA608898E6428F9766BBFB87
3. isp_Xiaomi_Redmi_9T.png
4. isp_Xiaomi_redmi_k20_mi_9t.png

[16:57:49] Found 20 files redmi, search limit is 20 files per server
1. xiaomi_MSM8953_Xiaomi_xiaomi_ANDR_v7.0_Redmi_Note_4_mido_mido
2. xiaomi_MT6765_Xiaomi_Redmi_6_SW_S98507AE1_V009_M13_XM_C3D_cereus
3. xiaomi_Redmi_4X_santoni_MSM8937_ANDR_v7.1.2
4. [16:46:13] Vivo 1940
[16:45:12] Vivo 1940 file need
[16:43:33] Do you have Infinity Dongle?
[16:33:31] Found 7 files Tecno be6
1. tecno_be6_MT6580_140F2E92BAABBE58CEC547E6869B61D3
2. tecno_be6_MT6580_249C17FC720C3597D4A6F1952F951EE0
3. tecno_be6_MT6580_0DD947C0B088C831E18B3043493416A1
4. tecno_be6_MT6580_A8DB84DFE0EEAD1F4CB0C629A5CF20
[16:25:30] I have USB dongle
[16:24:54] I have USB dongle
[16:22:30] this is infinix x5010 what could be the problem=== [24-11-2022 21:20:51 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===
S/N: 601556E4 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v312457 Ok

Server unavailable
Username or Password is wrong - set it via Settings
https://infinity-box.com/?r=100166

Load IDBase v312457 Ok
EMIBase: C:\\FILES\\MT6580__Infinix__nfinix_X5010__0__90
[15:37:03] can someone please assist me with this file? I\'ll appreciate https://support.halabtech.com/index.php?a=downloads&b=file&id=646848
[15:31:30] Reset password or e-mail here https://infinity-box.com/service/\r
\r
Click here https://www.youtube.com/watch?v=KogYDEkg-O8
[15:31:30] PLEASE HELP ME TO RESOLVE THIS PROBLEM
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR652B-F6317-11.0-OP-V036-20210708.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False
[15:22:54] This v4
[15:19:43] Tell me wich u want i will sand u link
[15:11:06] tecno be6, pop 6 go
[15:09:45] Sand full model
[15:09:16] NOT THERE only nv files
[15:02:49] Tell me i will sand u link
[15:02:41] Which one u want
[15:01:47] Try here @FlashFileSearchBot
[15:01:47] Tecno be6 ineed file
[14:52:18] Hisense U930 fLashing done gyus
[14:51:53] K need firmware nokia ta 1270
[14:51:50] https://youtu.be/OQRJWY4gjvk
[14:41:41] click to identify first
[14:41:03] আসসালামু আলাইকুম
বড় ভাইদের দৃষ্টি আকর্ষণ করছি
symphony v130 hw1 v8 fiash file
ভাইসনের ফাইলটা যদি কেউ দিতেন তাহলে একটু উপকৃত হতাম
[14:36:58] How to activate this service
[14:36:57] ?
[14:29:27] you must check what was original firmware version and flash phone with that version
[14:23:06] سلام، اینجا کی فارسی بلده؟ 😁
[14:19:06] non english will be deleted
[14:18:54] use english
[14:16:42] আসসালামু আলাইকুম
বড় ভাইদের দৃষ্টি আকর্ষণ করছি
symphony v130 hw1 v8 fiash file
ভাইসনের ফাইলটা যদি কেউ দিতেন তাহলে একটু উপকৃত হতাম
[13:05:32] Sir help me with it\'s right file I have tried with several files
[12:50:31] Do you have Infinity Dongle?
[12:49:53] make this https://forum.infinity-box.com/viewtopic.php?t=9483
but use preloader for your phone

also you may try:

get this https://infinity-box.com/?r=100202
Make [Identify]
if you will see a message like \"EMI failure\"
Right after that go to \"Cloud\" tab and click to \"Get Preloader\" button.
In case of success you will get from server file with preloaders for your phone.
Unpack preloaders and boot phone again this way: https://forum.infinity-box.com/viewtopic.php?t=9483
Of course you should select one of pre
[12:47:31] Which loader best works with neon ray pro?
[12:40:32] Where can I watch a video that shows how to install infinity cm2 and what does it need to work without any problem
[12:34:37] Can I someone show me a video where it shows all steps you to do..to get infinity cm2 work properly
[12:34:27] Mobicel R7 read info fail
[12:34:16] Card found : 639CC893 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

Update configuration ...
Load IDBase v723487 Ok!

Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM25)
MODE : BOOTROM
PORT : 25
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!

[12:27:33] I understand nothing

Flash phone with good firmware
in case of problem send sw log text
[12:24:03] is there any way to unlock TA-1352
[12:18:17] The file it had was corrupt and it had a problem of not responding
[12:17:55] Thank you bro
[12:17:21] it looks like not supported version
some time later
[12:16:32] Click here @FlashFileSearchBot and type there phone name. You will get links
[12:16:16] Your dongle support period is expired.

If you have credits at your Infinity Account see top menu and order renew. It takes about 7-8 minutes.

If you have no credits - contact to any seller https://infinity-box.com/buy/
Send your dongle S/N to seller
Order [CM2] support renew for 1 or 2 years

How to check support date - https://infinity-box.com/doc/?r=17
[12:15:46] what was before flash?
[12:14:18] Need help
[12:10:48] Tecno pop 2 power touch not working after flash please help
[12:09:00] am getting this .please help
[12:08:37] Card found : 639CC893 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...

>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify
[12:08:35] Nokia TA 1352 network unlock
[12:02:32] select another loader
[12:01:29] without sw log text discussion is useless
[12:00:54] Tecno kg5j
[11:58:12] Cidea cm468 firmware any one have it
[11:55:57] andriod 11
[11:55:34] Safaricom neon ray pro
[11:54:51] https://t.me/InfinityBoxTalks/131691
[11:53:55] model?
[11:51:00] Login to iOS web
[11:50:27] Maybe i need nv data file for u962 hisense
[11:50:06] Reset password or e-mail here https://infinity-box.com/service/\r
\r
Click here https://www.youtube.com/watch?v=KogYDEkg-O8
[11:50:06] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : X6511B
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FD
[11:49:07] Imei and baseband ok
[11:48:53] Help me u962 no service🤔
[11:43:31] What android version is the phone?
[11:40:06] oh.... Thanks for the info but this particular has failed to come up now.... Any idea from you while I work on the admin\'s request?
[11:37:02] I think there’s more to easybuy phones. I also tried flashing one but was failed and not successful. It connected with test point but fail to init. So I think there’s more to easybuy. Most of it doesn’t connect successfully on cm2. And it switch on automatically when tick local sla.
[11:34:03] tecno n8s only available in the loaders.
[11:27:57] I was using cm2 2.37 but was facing that same problem then I decided to downgrade but still no solution
[11:15:23] test-points that we have are here http://dl1.infinity-box.com/00/?dir=test-point/
If you will get new test-points pls drop it here, we will add to server
[11:14:22] make this https://forum.infinity-box.com/viewtopic.php?t=9483
but use preloader for your phone

also you may try:

get this https://infinity-box.com/?r=100202
Make [Identify]
if you will see a message like \"EMI failure\"
Right after that go to \"Cloud\" tab and click to \"Get Preloader\" button.
In case of success you will get from server file with preloaders for your phone.
Unpack preloaders and boot phone again this way: https://forum.infinity-box.com/viewtopic.php?t=9483
Of course you should select one of pre
[11:12:23] I need to flash this phone
I need a DA file or test point phone not connecting to brom by vol keys
[11:11:43] write here
[11:10:10] help me admin=== [26-11-2022 14:06:23 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===
S/N: 601556E4 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v312457 Ok

Server unavailable
Username or Password is wrong - set it via Settings
https://infinity-box.com/?r=100166

Load IDBase v312457 Ok
Operation : Identify Device [ v2.37 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly :
[11:07:55] Can write inbox please
[11:07:38] ok, try it. waiting
[11:07:08] Need unlock network lock
Zte a5 2019-t device
[11:07:03] Nothing found for HANDYT2

If you will get the file upload it to support with iosFileUploader

[11:06:48] make this https://forum.infinity-box.com/viewtopic.php?t=9483
but use preloader for your phone
[11:06:09] What is the problem with it?
[11:06:00] post all details to support forum
write there model name
original firmware version
all files that you tried
all software log text
waiting
[11:05:43] What about Blu R1 Hd
[11:04:22] I\'ve done that over 15 times
[11:03:39] Need this file
[11:03:28] MT6750TCLhandy_T2_EU7.1.1N4F26M__HANDYT2
[11:02:11] I tried removing \"EasyBuy\" by flashing. Now its not power on at all, I\'ve tried different loader/pac file but no solution
[11:01:26] #CM2MT2 boot manual https://infinity-box.com/?r=100189
[11:01:01] repeat process
[11:00:25] you must install latest SoC drivers
[10:59:48] you must have Infinity Dongle!
Buy it here https://infinity-box.com/buy/
[10:59:11] What is the problem with the phone?
Is it stuck on boot-logo?
[10:58:39] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[10:57:55] at first install v2.37 but not 2.35
[10:50:29] someone please.
ADMIN
[10:48:58] copy paste logs
[10:47:00] what makes this error.
and how to solve it
[10:44:43] Any help pls
[10:44:21] Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR652B-F6317-11.0-OP-V046-20210830.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

ERASE : FORMAT WHOLE
[10:41:28] It says smart card not found
[10:38:58] Have changed two laptops at the moment
[10:38:29] What strange problems
[10:38:19] But now when I\'m connection oppo A12 .the computer shuts down in between and says your device ran with a problem..when Cm2 is running to do a job
[10:37:34] Please what\'s solution to stop this
[10:36:53] Thank u done with all in one smart card drivers
[10:27:49] When are you guys going to provide us this solution
[10:27:12] Nothing found for Simi s503

If you will get the file upload it to support with iosFileUploader

[10:26:37] what is your problem?
[10:26:19] Mi Account info https://forum.infinity-box.com/viewtopic.php?t=3947
[10:25:53] nice
connect it to USB and use software
[10:25:29] try to select another loader or choose pac file
[10:25:23] select another loader from drop down lost
[10:24:40] you must buy Infinity dongle https://infinity-box.com/support/?s=2
[10:24:22] Please what\'s the meaning of this error message?
[10:23:24] hello admin
[10:22:00] Oppo cph2269 frp. Cant work with testpoint or brom mode ...android 11
[10:16:46] it depnds on platform/model
[10:15:30] both options available
1. you can get separate [BEST] dongle
OR
2. you can add [BEST] activation to CM2 dongle
[10:13:34] Files and unsigned drivers installation manual https://dl3.infinity-box.com/00/pub/?dir=drivers/

Another way - insert smart-card to any other card-reader (dongle)
[10:08:16] Who can do sim-s260dl carrier unlock BIT9
[10:07:09] Nothing found for s260dl

If you will get the file upload it to support with iosFileUploader

[09:59:39] Help me mtk phone not detect with software , I have installed all the driver
[09:41:07] It say dongle not found
[09:37:08] Do not install any drivers, just connect dongle to PC
if you can read S/N - it works
[09:36:25] Make this https://infinity-box.com/?r=100155
[09:36:25] Dongle misconfiguration contact support pls help me
[09:36:20] What error?
[09:31:01] Cannot install 2 with old drivers
[09:30:35] Hello I need Schlumberger Schema Cyberflex E-gate drivers for windows 11 64 bit
[09:29:54] Found 20 files x655, search limit is 20 files per server
1. Spice_X655F_H6211E_Q_AS_201026V238
2. nokia_230_RM_1173_40.00.11_HMD_RM_1173_059X655_40.00.11_NDT_MEA_IO_SILVER_LATIN_UZ
3. infinix_SP7731GEA_X655C_mini_10.0_MRA58K_release_keys_X655C_mini
4. [09:29:29] Found 5 files Infinix hot 9
1. infinix_W90918A2_Infinix_HOT_3_5.1_ALPS.L1.MP6.V2.19_WT6580.WE.XIAN.L_P16
2. infinix_x557_hot_4_MT6580_9F441A2184130642D7765F423976BCC3
3. infinix_x5511_h3716b_hot_4_pro_MT6735_16E8B03BAE898A7FB43F641133C83165
4. [09:28:40] Found 23 files hot 9, search limit is 20 files per server
1. Hotmax_MT6580_HOTMAX_R29_R29_6.0_alps_mp_m0.mp1_V2.34_droi6580.weg.m_P50
2. X_Tigi_MT6580_VSUN_X_TIGI_Photo_P16_8.1.0_V13_O11019
3. Intex_IN001hotshot_V0019_Indian_NoSMS
4. [08:14:46] We are not getting any help here
[07:59:52] Any help flash blu r1 hd
[07:31:17] samsung a035f fdl please any one
[06:09:44] Not working showing error
[06:05:31] Same problem
[05:57:26] Infinity Best NK2 Nokia qlm,SP is working but Nokia base (BL) is not working
[05:52:36] Run dongle manger and click UK off
[05:50:11] I heard of cm2 BEST.
someone clarify if its a separate tool or its an activated service in normal dongles.
[05:47:22] How to activate this service
[05:07:04] I bought USB dongle
[04:32:52] 🆗
[04:18:59] Nothing found for I can\'t find it

If you will get the file upload it to support with iosFileUploader

[03:48:34] No sir
[03:37:56] Oh ok, maybe I\'ll get the dongle on Monday, thank you
[03:34:25] Redmi note 11 mi account remove ..... solution
[01:42:19] Cm2 used,but not sucCESS
[01:34:20] how to find hidden facebook page admin
[01:09:58] Simi s503 flashe file halp pls
[00:02:30] ok, maybe later
[00:01:59] have you tried with software?
[00:01:35] http://dl1.infinity-box.com/00/?dir=nvram/samsung/sm-a125f/
[00:01:00] use default loaders
[00:00:21] Found 14 files oppo a54
1. oppo_realme_MT6765_7FDE3D3200A5489C61F45A0034ECF90D
2. oppo_realme_a59s_MT6755_FF9ED6686A5449C19E5833067C675BC9
3. oppo_realme_cph2239_a54_MT6765_A48AD60EE50C7D121E1C2C4A3FA4C0F0
4. oppo_realme_cph2239_a54_

InfinityBoxTalks 2022-11-25

[23:59:49] Found 2 files Tecno bd4h
1. tecno_bd4h_MT6761_CC195C0D1BEB911B9C6FCA8A6300CC2A
2. tecno_bd4h_MT6761_17FB9C817B613FB3E93122AA9E5DB14B

[23:59:35] http://dl1.infinity-box.com/00/?dir=nvram/xiaomi/
[23:58:49] what is this file?
[23:58:07] send e-mail to support https://infinity-box.com/contact/
[23:54:32] Do you have Infinity dongle?
[23:54:01] Nothing found for mobicel vibe

If you will get the file upload it to support with iosFileUploader

[23:53:49] What is the model name?
[23:53:26] Have you found it?
[23:53:07] Do you have Infinity Dongle connected to USB?
[23:52:14] Found 7 files kf6i
1. tecno_KF6i_H6218EFK_R_OP_210323V96
2. tecno_KF6i_H6218EFK_R_OP_211109V198
3. tecno_KF6i_H6218EFK_R_OP_210903V176
4. tecno_KF6i_H6218R_R_KESF_211028V99
5. [23:51:59] go here https://infinity-box.com/
click to brand name, you will see model and exe name
[23:51:35] I have erreurs in system
[23:51:10] Not yet
[23:50:58] please explain your idea
[23:49:28] what is the problem?
[23:47:56] model?
[23:46:20] install boot-helper or libusb from /tools/ dir
[23:45:07] Found 13 files x682b
1. infinix_X682B_H694ABT_Q_GL_210831V398
2. infinix_X682B_H694ABT_Q_GL_210313V381
3. infinix_X682B_H694ABT_Q_GL_210705V394
4. infinix_X682B_H694ABT_Q_GL_201016V296
5. [23:44:51] you may try to select another model/loader
start with defualt one
[23:44:21] you may try to select another model/loader
start with defualt one
[22:44:25] 5 min ... 24 hours
[22:43:56] https://infinity-box.com/support/
[22:43:37] see available options here https://forum.gsmhosting.com/vbb/f641/
[22:42:39] Infinity [BEST] https://infinity-best.com/
[22:42:00] You neen Infinity-Box or Infinity Dongle or Infinity CM2. It\'s the same name.

Infinity BEST is another thing, it\'s for nokia only
[22:40:51] Nothing found for cidea cm468

If you will get the file upload it to support with iosFileUploader

[21:15:33] Hi i need MDM for infinix X657
[21:04:51] X6819 test point pls
[19:39:51] Buy infinity cm2 or Infinity best
[19:30:50] Plz
[19:30:40] Hello team any one have firmware of cidea cm468
[19:23:18] Who knows what dongle should I buy that will work with infinity cm2 software?
[19:18:59] No , it nokia best tool for nokia only
[19:15:32] does CM2 work on dct4 bb5???
[19:13:50] Cm2 best tool
[19:13:05] Who knows how to change imei to nokia dct4 bb5 and what models are obtained
[19:11:48] What is sn ??
[18:57:52] https://dl1.infinity-box.com/00/pub/?dir=/software
[18:31:43] I want to download infinity cm2 software were can I get the link?
[18:13:03] So how long does it take to fix?
Fault code
[18:00:59] Make this https://infinity-box.com/?r=100155
[18:00:59] How to fix dongle misconfiguration please?
[17:58:08] Is started now
[17:57:53] Help me how to fix
[17:55:06] It\'s SPD device
[17:48:19] better you choose another module like mt2
[17:44:32] Reading data ...
STATE : ACTIVE : CODE : 33533047
[16:37:21] Have this issue with spark 7 pls
[16:25:12] thanks
[16:24:09] https://youtu.be/texzFgP_NLs
[16:22:00] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[16:22:00] Load IDBase v8331 Ok!

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : X6511B
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
[16:21:44] i have tried but this is what i got
[16:21:14] cm2 spd2
[16:20:54] cm2 spd2
[16:20:25] how can i remove frp from infinix x6511b
[16:18:48] Try here @FlashFileSearchBot
[16:18:48] x682b spd i need file flash
[16:18:47] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[16:18:47] Load IDBase v8331 Ok!

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : X6511B
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
[15:54:05] Wht loader
[15:49:28] Download loader
[15:47:19] Where can I remove frp of Spd sm a035f
[15:46:34] Where can I remove frp of Spd sm a035f
[15:45:21] Only solution I hv.. is 2 format pc
[15:44:45] How can I remove it
[15:44:01] Virus
[15:43:38] No...
[15:43:26] Chipset
[15:42:33] Cm2 removes frp a035f
[15:40:20] Nop
[15:39:59] A035f SPD
[15:37:57] Did it show mass storage
[15:36:58] Cm2mT2 solution
[15:36:11] Imei
[15:35:26] Wat apen.. u flashed fone
[15:35:06] Snap n shw
[15:35:05] Please hope me
[15:34:51] Connect to pc
[15:34:43] Write n see first
[15:34:39] This
[15:34:34] Try use oppo custom a1k,a3k
[15:34:06] yes
[15:34:02] The it-fly i have done... remained with V330,w£+
[15:33:53] Yea
[15:33:47] Is it dead
[15:33:45] Or u hv initial preloader
[15:33:31] Gone
[15:33:23] Write nvram
[15:33:13] How do i fix it
[15:32:58] Please hope me
[15:32:49] Dead preloader
[15:32:17] It is latest security update... U need test point
[15:32:00] Boot key is \'0\'
[15:31:19] Download setup from CM2 support
[15:28:52] any help
[15:26:21] tecno spark 2 KA7
[15:19:36] how do i fix it
[15:19:29] 324D42 : Ven: Samsung | Dev: FE62MB : RAM: [ 1.00 GB ]
EMI[04] ID: 700100454841454538 : Ven: Kingston | Dev: EHAEE8 : RAM: [ 1.00 GB ]
EMI[05] ID: 150100514536334D42 : Ven: Samsung | Dev: QE63MB : RAM: [ 2.00 GB ]
EMI[06] ID: 700100454841434541 : Ven: Kingston | Dev: EHACEA : RAM: [ 2.00 GB ]
EMI: Init EMI from PRELOADER
INIT : 0xBC : DRAM [ 0x00000000 : [ 0 B ] ]
DRAM: DRAM: 0x80000000 [ 2.00 GB ]
DA: DRAM ready
DA: BOOT to 2nd DA...
DA : Receiving HW info
SR
[15:19:29] Dev: FE62MB : RAM: [ 1.00 GB ]
EMI[04] ID: 700100454841454538 : Ven: Kingston | Dev: EHAEE8 : RAM: [ 1.00 GB ]
EMI[05] ID: 150100514536334D42 : Ven: Samsung | Dev: QE63MB : RAM: [ 2.00 GB ]
EMI: Init EMI from PRELOADER
INIT : 0xBC : DRAM [ 0x00000000 : [ 0 B ] ]
DRAM: DRAM: 0x80000000 [ 2.00 GB ]
DA: DRAM ready
DA: BOOT to 2nd DA...
DA : Receiving HW info
SRAM: 0x00000000 [ 0 B ]
NONE: 0xC4F00000000 [ 12604.00 GB ]
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR:
[15:19:29] RESET
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...
PTFN: MediaTek USB Port_V1632 (COM4)
MODE: BOOTROM
PORT: 4
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
BROM: MEID: 6D05F1FC77607FDFA1442EE10E68C037
BROM: SecLevel: 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SLA: Local Auth
BROM: SLA: Starting Auth

[15:19:29] OK
eMMC: 150100514536334D4203FE1ECEF85565
NAND: DEVICE NOT FOUND
NAND: 000000000000000000000000
DRAM: 0x0178
EMI: FireFly preloader_ka7_h8024.bin with 7 memory type(s) supported
EMI[00] ID: 150100513732534D42 : Ven: Samsung | Dev: Q72SMB : RAM: [ 1.00 GB ]
EMI[01] ID: 90014A483847316505 : Ven: Hynix | Dev: H8G1e : RAM: [ 1.00 GB ]
EMI[02] ID: ADDE14A7424AAD : Ven: Unknown 0x00AD | Dev: §BJ : RAM: [ 512.00 MB ]
EMI[03] ID: 150100464536324D42 : Ven: Samsung | De
[15:19:29] config...
Finished
Format Ok: USERDATA
Format Ok: USERDATA
Done
Elapsed: 00:01:31
Reconnect Power/Cable now
Operation : Reset Settings/Format FS [ v2.37 ]
Mode: FACTORY RESET ( WIPE )
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...
Device not found
>>> Check cable, battery, connection and drivers!
Reconnect Power/Cable now
Operation : Reset Settings/Format FS [ v2.37 ]
Mode: FACTORY RESET ( WIPE )
1. Power Off the device
2. Wait 20 seconds
3. Connec
[15:19:29] untick auto EMI in Setting
[15:19:29] gui: Default
S/N: 576F2D41 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v723487 Ok
Update configuration...
Socket Error # 11001
Host not found.
Finished
Load IDBase v723487 Ok
Operation : Reset Settings/Format FS [ v2.37 ]
Mode: FACTORY RESET ( WIPE )
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...
Device not found
>>> Check cable, battery, connection and drivers!
Reconnect Power/Cable now
Operation : Reset Se
[15:13:44] Ķ
[15:11:48] Help and share
[15:11:28] Did you have any?
[14:54:54] Write nv
[14:44:22] Any solution to this, itel P37 no service network...
[14:30:13] It connect to pc but always fail at the end but normal phones that’s not easybuy work fine.
[14:29:05] Pls why is it that easybuy phones don’t connect on cm2, it always fail? I watched a tutorial and follow the steps but still got error. Is there something blocking easybuy phones?
[14:17:50] Need nokia 1.4 network unlock
[13:59:49] Admin how can I remove nvram
[13:59:26] Also try 5,*,0,#
[13:59:07] Hold left key upper case
[13:58:58] Bro
[13:56:12] How about key to hold and at what point on connecting
[13:55:01] Open
[13:54:59] Use cm2 SCR setup
[13:54:44] Spd
[13:54:13] Hello, Cm2 BST does not have a digital license?
[13:50:44] When with memory card. Otherwise its charging
[13:48:24] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[13:48:24] 1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM116)
MODE: PRELOADER PORT
PORT: 116
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT :
[13:48:22] help me plz
[13:37:36] Snap n shw
[13:37:36] Screenshot wen u connect let me see
[13:36:44] And protocol handshake failed
[13:36:11] Doesn\'t show... only charging
[13:35:00] And check if it shows mass storage only
[13:34:46] Off the phone ... Plug in to pc
[13:32:17] Which one is for RDA, can i use shell to identify feature phone cpu?
[13:32:14] plz give link firmware kf6i
[13:31:44] Write firmware
[13:31:15] device reboot any time
[13:30:54] dm-verity corruption tecno kf6i
[13:28:13] Cpu type
[13:26:36] RDA cpu
[12:11:02] SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Identify [ v1.07 ]
BootMode : FLASH

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
[11:53:06] How do i format these two? Kindly
[11:43:15] It\'s MTK I tried but no lucky
[11:42:47] Tecno ch9 Frp solutions please
[11:33:33] Having issues smart card not found
[10:56:15] Blu R1 HD Da file or test point
Sla not connecting
[10:55:38] Can\'t able To download Eno File

Can Anyone Give SecWim File For This Model
[10:49:53] Can\'t able To download Eno File

Can Anyone Give SecWim File For This Model
[10:37:48] Please help me mobicel vibe flash gi for spd pac file
[09:58:16] Anyone help me...I don\'t know which smart card does it need
[09:57:17] How I get it
[09:54:02] GSM UNLOCK INFO
[09:52:31] Admin can u help me with this
[09:50:01] A035F FDL OR FAC FILE PLEASE
[09:49:30] Samsung a035f fdl file help
[08:47:59] how do i transfer activation from a damaged card
[08:26:23] https://t.me/Sua_recompensa_bot?start=5911605051
[08:14:07] You mean to flash it??????

Or flash mode???? I can\'t find it on the option flash mode only diagmode and fast mode
[08:11:56] 🤝🤝
[08:07:36] Sure thank you
[08:07:00] Mobicel vibe
[08:03:23] @Abdulwasii_remote_tech_service
[08:02:03] credits are needed
[08:00:12] Buy credits for your dongle and use
[07:59:17] Cm2 blocked😳
[07:58:09] let\'s do it remote
[07:57:22] No
[07:46:17] https://forum.gsmhosting.com/vbb/f296/tecno-infinix-itel-firmware-request-thread-3082355/
[07:45:43] ios Version?
[07:44:44] Try to use flash mode not diag mode
[07:37:41] You have credits?
[07:32:25] Model
[07:30:31] It\'s good to accept you no nothing so as to be helped 😁😊
[07:26:14] 🤷‍♂️🤷‍♂️
[07:14:00] Someone will show you ,wait
[07:13:26] for what?
[07:13:10] I sent you backup
[07:12:25] you are speak in riddles, where is your backup? it is automatically created in backup folder. Or you disabled rsa?
[07:10:34] REDMI 9 FIX NVDATA CORRUPTED FREE BY CM2 MT2
[07:07:44] You seem to know at first until you find out you don\'t know😂
[07:07:07] A technician must know what to do🤝
[07:06:48] so what about imei? Or your phone shouldn`t call
[07:06:04] Cm2 mt2 memory tool write nvram backup file[nvdata corrupted fixed 100%😁
[07:05:03] how did you sign it?
[06:54:32] ❤️👍
[06:54:08] Im quiet..busy working on devices❤️
[06:53:45] Don\'t blame😁
[06:53:25] 😂😂😂😂
[06:52:44] File fix nvdata corrupted redmi 10a tested👍
[06:52:07] You are learner no problem 😅
[06:50:45] Got and done
[06:44:16] Do you know meaning of \"backup\" word?
[06:43:48] Are you ok? You need yours backup!
[06:28:00] Redmi 10a nvdata backup file need anyone send me
[06:14:47] Any support for Huawei PPA-LX2 ID
[05:47:12] Please Tecno bd4h link
[04:38:01] Found 5 files i216x
1. alcatel_tcl_Alcatel_9002X_Pixi3_7_TCL_I216X_MT6582_4.4.2_ALPS.KK1.MP1.V2.16_KOT49H_01002
2. alcatel_tcl_MT6582_TCL_I216X_PIXI7_4.4.2_ALPS.KK1.MP1.V2.16
3. alcatel_tcl_i216x_pixi7_MT6582_6C8FA67419AA5FD7E0CB919E4EA4EDB8
4. [04:29:54] I need flash file for oppo a54
[04:29:53] Infinix x6511b fdl file
[03:28:30] At admin, can I get samsung A125f NVRam file?
[02:15:18] Zte a5 2019-t
Australia telstra network unlock help need
(Code ask tried and not ask now)
[01:17:47] Please help Itel P651w (P37) NVram needed

InfinityBoxTalks 2022-11-24

[19:41:06] If you need a test with the device, I can connect you
[19:06:35] https://infinity-box.com/price/
[19:06:19] Ok
[18:02:09] Urgent
[18:02:03] Bonsoir svp besoin de quelqu\'un pour désactiver le icloud de mon ipad mini 4
[17:34:33] When?
[17:32:57] Work about more software features is in progress, new software will be released as soon as it will well tested.\r
\r
Please tell us list of required supported CPU types and functions
[17:32:57] Ok what about qualcomm update still no story
[17:32:54] Found 11 files kg5j
1. tecno_kg5j_MT6761_0CAB01EC3A0274959437C1A6662323F5
2. tecno_kg5j_MT6761_60418C2E728A71A68DD43A36980A4C35
3. tecno_kg5j_MT6761_8E9A55CED0B8305370D7F78FC6911104
4. tecno_kg5j_MT6761_37CC12D8666F8FBF71B38FCBE54EFC
[17:31:30] Help
[16:54:11] Now the phone it stock on power on refused to power off??
[16:03:54] I have nck box and cm2
[16:03:19] What kinda tools do u have
[16:02:57] Is not working,is requesting for the password
[16:02:21] Just click power on and volume+ together
[16:00:54] Forgotten password
[16:00:42] Hard reset
[16:00:25] What a u gonna do?
[15:59:20] Okay
[15:53:44] Pls who can help how can I identify this vivo model name
[15:41:47] Its not brom .so. test point is wrong
[15:38:21] Nokia c30 SP Unlock can\'t go to diag mode?
[15:34:45] Pls any way
[15:34:41] With test point this the results
[15:32:25] With test point
[15:24:02] Please help Itel P651w (P37) NVram needed
[15:02:57] please add support nokia TA 1400 flashing and ulocking
[14:45:40] Cm2spd please add Realme C30 RMX3581 unlock network
[14:32:50] https://infinity-best.com/support/
[14:32:30] Cm2spd
[14:32:09] Try using test point bro
[14:23:41] Possible sir 💯✅
[14:20:58] Model?
[14:20:25] That solution is paid bro
[14:16:31] Model?
[14:15:56] Try using external tools
[14:13:18] Infinity best link
[14:12:48] Infinity link
[13:53:45] Hello Team any solution to unlock 🔑 Oppo AX5 PBBM30 snapdragon 450 password
[13:42:20] thanks i repair that
[13:38:59] still have
[13:38:56] no bro
[13:38:30] Fixed ?
[13:35:12] Try factory reset in meta mode
[13:33:52] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[13:33:52] Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : X6511B
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[13:33:34] Pls I need x655 da file
[13:33:03] What caused damage in nv data?
[13:30:54] Try this, Download device scatter file, manually select preloader file, check on local sla and connect device with TP
[13:30:32] Model
[13:26:16] Try using cm2spd
[13:20:49] Format in meta mode
[13:19:25] I try almost all the loaders
[13:18:57] sir, try and see result
[13:17:23] select other loaders or use test point
[13:16:50] Your dongle was damaged with sharing tool.

Now use FREE repair https://infinity-box.com/?r=100203
[13:16:35] Vivo y12 hard reset with cm2m2 pls I need help
[13:14:45] Make this https://infinity-box.com/?r=100155
[13:14:14] #CM2MT2 boot manual https://infinity-box.com/?r=100189
[13:13:43] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[13:13:10] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[13:12:47] try default one first
result?
[13:12:21] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[13:03:49] Bro if back up keep failing ... Software corrupt
[13:03:17] I want to backup the phone file first
[13:02:23] Download file n flash
[12:56:40] Why mtk 6580 keeps failing when reading file any idea?
[12:54:33] itel it2163d network unlock any solution
[12:45:33] 👆🏽
[12:43:03] Make test point.
[12:41:46] It\'s mtk
[12:41:30] Hello house do anybody know base that support Tecno KG5P
[11:53:10] Hello
[11:48:26] Restart pc n tool n phone ... Try again
[11:37:27] What can I do
Infinix x658e
[11:28:54] Nothing found for Gionee 5001s

If you will get the file upload it to support with iosFileUploader

[11:27:01] Found 7 files gn 500
1. Konrow_MT6739_KONROW_SWEET5_11_KONROW_SWEET5_V1_20210803_RP1A.200720.011_AGN_8149TQF_L5002B_E1_MV88_RGO_V01
2. MTK_MT6225_LC6225_GEMINI_PCB01_GPRS_MT6225_S00.P611C_FOREIGN_V1_0_IPhone_N5000_16m_En_Fr_Es_It_Tr_Farsi_Pt_Ar.B0M
3. MTK_MT6225_LC6225_GEMINI_PCB01_GPRS_MT6225_S00.P61
[11:26:36] Admin please help
[11:26:00] ☝🏿
[11:25:50] Pls experts what does meta drivers do? I tried to format one oppo A54 (Mtk) but doesn’t connect to pc. It switch on when inserted cable. I came across a post online that says install meta drivers.
[11:25:35] Found 23 files X697, search limit is 20 files per server
1. Infinix_X697_H812ABC_R_OP_211112V1031
2. Infinix_X697_H812A_R_RU_211112V1033
3. Infinix_X697_H812ABC_R_OP_211029V922
4. Infinix_X697_H812A_R_TR_211112V1032
5. [11:22:47] X697 firmware
[11:20:26] Tecno KH6 Spark 9T solution?
[11:17:03] check this link https://forum.infinity-box.com/viewtopic.php?p=2660
[11:08:49] Whats the issue here, i try launching cm2spd2
[11:02:55] Model?
[10:58:59] Vivo y12 hardreset
[10:45:37] X658 FDL
[10:39:54] Pls how hard reset vivo y12 with cm2m2
[10:30:57] Lock it bk
[10:30:00] Same here Pls help me
[10:25:59] With dongle manager
[10:25:53] Update dongle
[10:19:45] Make this https://infinity-box.com/?r=100155
[10:19:45] dongle misconfiguration
[10:19:37] can anyone help me guys
[10:10:18] mtk 6765 and 6771 infinity also can
select sec_6765 with custom preloader and try to boot
[10:09:26] D question was that if there is any tool that can unlick
[10:08:41] Am sorry... Admin
[10:08:34] Kk boss
[10:08:27] inbox is forbidden here
[10:08:09] Bro there is solution but not wit cm2.. inbox
[10:07:48] is group related to unlocktool ?
[10:07:30] Works
[10:07:28] Or use boot device from unlock tool
[10:07:16] Format with meta
[10:03:21] Nope the lastest ones isn\'t booting there only option is to force Brom then via clk and then format the particular area
[10:01:16] 🙏
[09:59:14] If mtk ... Unlock tool can handle it
[09:58:42] Please any solution on all Spd and mtk palmpay security plugin temporary unlock with cm2
[09:56:05] run DongleManager.exe - https://infinity-box.com/?r=5
Make \"Read Serial Number (S/N)\"
if you see S/N it means it works
[09:52:26] Vivo y12, y15 and y17 update when ? As some tools started unlocking it
[08:39:52] but it says driver error
[08:32:46] dosent help 😐
[08:29:34] oooh l changed card reader it works...
[08:24:04] Make this https://infinity-box.com/?r=100155
[08:24:04] hi supporter my infinity best is misconfiguration with diagnostice code 59 how can in repair that?
[08:04:37] Alcatel joy tab 2 network unlock code is it supported
[08:04:13] Itel s18 is it supported now
[08:02:20] Fnb conexis X2 network locked which tool supports it guys ?
[08:01:38] no
[07:32:43] Your dongle was damaged with sharing tool.

Now use FREE repair https://infinity-box.com/?r=100203
[07:21:40] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[07:21:40] gui: Default
S/N: 4B531EA8 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v723487 Ok

Update configuration...
Configuration [12060] updated

Load IDBase v723487 Ok
Operation : Identify Device [ v2.37 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the de
[07:11:07] Hi everyone ,anybody here have a test for tecno pop 5 pro BD4h?
[07:08:15] Have you made test point?
[07:05:36] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[07:05:36] please help! i need solution on how to solve this TECNO spark 8C (KG5J)
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1633 (Android) (COM20)
MODE: PRELOADER PORT
PORT: 20
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000005
BROM: Sec
[07:04:41] 661502A5 please this my s/n
[07:04:16] GND & KCOL0
[07:02:12] which is the test point for tecno N8s.
its dead
[06:54:53] https://forum.gsmhosting.com/vbb/f296/tecno-infinix-itel-firmware-request-thread-3082355/
[06:53:51] KE5-H6123D-RGo-INJO-LC-210818V192.zip
[06:53:22] Tecno spark go 2021 flash file need
[06:52:56] Please I need galaxy A035f FDL file, SPD device
[06:33:14] Itel s15 after flash no service solution please 🙏
[06:30:52] Can I get test point for X665b
[06:29:28] I made $50,000 profit within 5days through forex investment at
https://t.me/joinchat/m-QKyjZJ7jY2NGQ8
[06:25:44] link to download mtk drivers?
someone help.
mine can\'t be detected by pc
[06:09:30] Nothing found for a035f fdl

If you will get the file upload it to support with iosFileUploader

[06:06:48] Found 2 files a035f
1. recent_JDM_A035F_SL6215A_FAC_A035FXX2F063_220825byCHAUDHRAYARSHAD
2. samsung_a035f_test_point.jpg

[06:06:13] File/a035f
[06:03:04] 661502A5
[05:31:46] https://www.martview-forum.com/threads/vivo-y21-august-september-security-downgrade-imei-repair-done.70987/#post-203805
[04:34:27] try selecting the right loader
[04:27:26] Must use test point brother
[04:26:53] LG k22 unlock support ?
[04:19:09] X665b brom block test point please

InfinityBoxTalks 2022-11-23

[23:20:21] Make this https://infinity-box.com/?r=100155
[22:48:31] I am face this isu without any reason
Need help
[22:12:07] S/N?
[22:10:46] Dm
[20:41:07] Brom block tecno kg7h test point needed please
[20:26:11] Yes I do it but problem not solved
[20:17:37] Model
[20:11:28] Tried, it hangs at ..Prepare target..
[19:54:15] Anybody with the solution to this. Jumping Broom
[19:31:34] Qualcomm cpu not supported by cm2 for now,maybe in the near future. Inbox @libimobile for more details
[18:59:16] It\'s a spd
[18:42:59] Please who has solutions for tecno kg7h brom black I what to flash the phone please
[18:29:57] redmi y3 mi account remove
[18:28:32] Yes, tick diag mode try identfy
[18:27:27] good
[18:25:49] reinstall
[18:25:15] No. Open cm2sp2
[18:23:44] Follow this procedure , u will get solution
[18:21:06] It has a network lock
[18:20:56] If spd try it in diagmode amd u must have server log in credentials + your account shud have credit
[18:20:06] U have cm2?
[18:19:01] pin network
[18:18:43] Power off fone plug in cable check board platform i help u
[18:18:25] Sim pin or?
[17:59:38] Sim lock
[17:41:42] Isp available
[17:39:19] https://youtu.be/zbmeXJF40gs
[17:34:10] Sorry am asking if any help
[17:33:29] please send file here for all users
[17:32:20] Hello admin... Got d x6816 test point
[17:12:20] Ok
[17:11:30] sorry boss device was done with another tool and i handed over to client. in future i will contact you
[17:03:44] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[17:00:20] Tecno KF8
[16:42:54] no need any drivers
just connect and it should work
[16:41:46] please help, just installed new windows 10 now having hard time finding token driver for my infinity smart card and reader
[16:32:52] Still waitin
[16:32:47] Have not seen boss
[15:54:09] DM
[15:45:42] is it possible to do hard reset on nokia 1380 with infinity-box cm2?
[15:39:12] I am looking for a job 15 years of experience software and hardware skills with different types of unlock tools and flash
diagnosis and repair of hardware failures
availability to travel immediately
Name: Luis Reyes
age 39
Spanish Language
Email: reyesenrry@gmail.com
[15:29:02] Pls do you have any idea
[15:28:34] Yeah
[15:28:17] g10?
[15:27:05] I wanted to repair the imei
[15:24:40] model?
[15:24:16] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[15:24:03] How?
[15:24:02] why CM2MT2 is failing to detect the device is sp locked or not while CM2SP2 working good
[15:23:51] what is the prob with the phone?
[15:23:17] Nvram damage
[15:22:48] try v2.37 or v2.38 but not 2.33

also check https://infinity-box.com/?r=100196
[15:22:08] Operation: SP Unlock [ v2.38b7 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: META
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM27)
MODE: PRELOADER PORT
PORT: 27
Waiting BOOT ack...
PRELOADER: ACK confirmed
META Timeout: 16
Waiting for boot logo...
INIT: META confirmed
Boot done (0)

AP_CHIP: MT6768
AP_SWTM: Tue Aug 24 12 59 34 CST 2021
AP_SWVR:
[15:22:05] its requesting vivo account when im connected to the wifi just after reseting it
[15:21:52] having this issue now
[15:21:33] Operation : Repair Security [ v2.37 ]
Mode: FLASH

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port (COM35)
MODE: BOOTROM
PORT: 35
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]

BROM: MEID: 60D23BB84C8FADB1506844D57EAE68B8
BROM: SecLevel: 0x000000E7
BROM: SecMode : SBC+S
[15:17:11] no is phone off
[15:14:32] What is the problem with the phone?
Is it stuck on boot-logo?
[15:14:11] Ok
[15:14:10] https://t.me/InfinityBoxTalks/130854
[15:13:17] you need compatible preloader but not \"any preloader\"
[15:12:58] tb2 A8-50cl MT-6735 flash
error!!!
[15:12:53] I have tried preload also still desame thing
[15:12:42] like that https://forum.infinity-box.com/viewtopic.php?t=9561
[15:12:13] I have untick EMI still same
[15:11:41] G10
[15:06:44] problem?
[15:03:22] model?
[15:03:12] read manual
[14:57:52] untick auto EMI in Setting
[14:57:51] 1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek USB Port (COM35)
MODE: BOOTROM
PORT: 35
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]

BROM: MEID: 60D23BB84C8FADB1506844D57EAE68B8
BROM: SecLevel: 0x000000E7
BROM: SecMode : SBC+SLA+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM

[14:52:00] vivo y51 vivo account remove
[14:47:44] Dear Friends,
Please never share your dongles with eltima|virtualhere and other sharing tools.
You may kill your dongles with sharing.
I will never share my Infinity dongle via network because it is usage rules violation and repair will be PAID.

How to share Infinity see here https://infinity-box.com/?r=100174

S/N to repair: [...write here your dongle S/N.. 3D71CDCB]
[14:42:25] Have you found it or not yet?
[14:41:55] Make this https://infinity-box.com/?r=100155
[14:41:43] Any problem with it?
[14:41:22] what do you want to do?
[14:40:33] read https://infinity-box.com/?r=100189

Now Ok?
[14:39:24] Your dongle was damaged with sharing tool.

Now use FREE repair https://infinity-box.com/?r=100203
[14:38:45] what is the cpu type?
[14:19:22] I want to unlock it\'s network
How do I do it
[14:17:46] Model?
[14:12:53] Infinix x6816 test point any one got
[14:11:13] Unlock network?
[14:06:36] Benco e10
[14:06:12] no
[14:05:47] Fixed?
[14:03:11] Nothing found for Itel S663L

If you will get the file upload it to support with iosFileUploader

[13:57:07] Itel S663L firmware is needed pls
[13:46:03] Hello are you ok?
[13:42:07] hello
[13:38:52] Kg5k test points kindly
[13:08:43] Tecno spark 5 go, need factory reset, not connecting,help.
[13:02:37] Thanks already done
[13:01:11] How can I erase nvram with cm2mt2
[12:57:52] 23-11-2022 04:57:03
Username: 003D71CDCB
==> Scan C:\\Users\\m.t solution\\Desktop\\CM2 Dongle Manager v1.92\\CM2 Dongle Manager v1.92\\ for report.log
==> Scan c:\\InfinityBox\\ for report.log
==> Scan c:\\Program Files\\ for report.log
Found files: 0
==> Scan C:\\Users\\m.t solution\\Desktop\\CM2 Dongle Manager v1.92\\CM2 Dongle Manager v1.92\\ for fault.bin
==> Scan c:\\InfinityBox\\ for fault.bin
==> Scan c:\\Program Files\\ for fault.bin
Found files: 0
No reports found Serial No (S/N): 3D71CDCB
[12:57:15] Network
[12:54:08] is it possible to unlock nokia 1380 with cm2?
[12:54:07] Make this https://infinity-box.com/?r=100155
[12:54:07] Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Box/Dongle misconfiguration
Diagnostic code: 67
23-11-2022 04:51:53
Username: 003D71CDCB
==> Scan C:\\Users\\m.t solution\\Desktop\\CM2 Dongle Manager v1.92\\CM2 Dongle Manager v1.92\\ for report.log
==> Scan c:\\InfinityBox\\ for report.log
==> Scan c:\\Program Files\\ for report.log
Found files: 0
==> Scan C:\\Users\\m.t solution\\Desktop\\CM2 Dongle Manager v1.92\\CM2 Dongle Manager v1.92\\ for fault.bin
==> Scan c:\\InfinityBox\\ for fault.bin
==> Scan c:\\Program Files\\
[12:49:35] Galaxy A21 test point
[12:46:43] Please solve my problem
[12:42:41] #CM2MT2 connection issue solution https://infinity-box.com/?r=100189
[12:42:41] Operation : Reset Settings/Format FS [ v2.37 ]
Mode: FRP [ RESET PROTECTION ]

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM8)
MODE: PRELOADER PORT
PORT: 8
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000005
BROM: SecM
[12:41:17] Hello any help with Nokia c100 da TA-1484
[12:35:29] y1S VIVO HARD REST AND FRP HELP ME
[12:35:28] Please help what\'s problem
[12:24:42] Infinix x6816 test point... Any one have
[11:59:25] Many
[11:59:10] Have you done one before?
[11:58:52] Ok
[11:58:40] Use test point
[11:57:33] How can I repair IMEI on Nokia g10 android 11
[11:53:21] which tool
[11:50:43] Vivo y11 unlock hoga kya cm2 se
[11:29:29] install latest qcommtk drivers from support
be sure libusb installed well
try another cable

also you may try this to get more usage hints https://infinity-box.com/?r=100202
[11:21:55] hello admin. what error is this??
and how to fix
[11:12:19] make it
any prob?
[11:02:09] i need dead boot repair file for a025f u3 please
[10:59:02] change case update module kalcom
[10:57:00] how to
[10:56:15] Your dongle was damaged with sharing tool.

Now use FREE repair https://infinity-box.com/?r=100203
[10:56:02] help
[10:52:48] Serial No (S/N): 3D72C6FD
[10:45:40] how to
[10:39:52] What models have you tested well?
[10:38:41] select another cpu/model from the list
start with default loaders
[10:37:54] backup should be created automatically
Are you sure you have no backup?
[10:37:06] Your dongle was damaged with sharing tool.

Now use FREE repair https://infinity-box.com/?r=100203
[10:36:30] help@infinity-box.com
[10:36:01] Make this https://infinity-box.com/?r=100155
[10:35:28] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[10:35:16] use CM2SPD.exe or CM2SCR.exe
[10:35:10] Please waiting
[10:34:58] Try CM2SP2.exe
[10:33:39] some time later
[10:16:12] Don\'t mind them ...they will get it and use it to make money....how about you tell cm2 to give for free then...things we get for free goes for free but the things I paid for ...I will never give for free
[09:53:15] how can I remove user lock opp k1 via cm2?
[09:53:05] Nokia C30 can\'t go to diag mode help?
[09:42:29] It\'s ok sir 😉
[09:41:33] Hahaaha, but you said that you know me.....

You think I come here everyday, use my data and time, I also buy from others, then I should give you for free so that you can use it to make money....Wong you call me stupid if I do that?
[09:41:21] you right
[09:39:42] Nobody knows everything
[09:39:32] No, others will help me boss, next time will be you need from others
[09:39:22] 😀😀
[09:38:44] Good day Boss, you said you know me, kindly explain, I may give you for free
[09:37:38] Good day boss.
[09:37:25] Explain
[09:37:15] I know you sir
[09:37:01] Not free
[09:34:18] I want Testpoint to remove Frp
[09:33:42] Testpoint and MDM file available
[09:33:24] Not free
[09:30:47] Help Testpoint for Tecno KF6I
[09:04:43] Use cm2 scr setup
[09:04:03] Infinity best
Last update
[08:45:44] Hello how do i flash safaricom neon ray pro SPD_PROG firmware ?
[08:05:39] I try but cm2 not recogniz spd keypad phones
[08:03:09] What causes Mobicels SPD to have trouble with handshake
[07:59:21] Found 1 file huawei 360 u82
1. Huawei_Honor_MT6572_HUAWEI_HUAWEI_Y360_U82_Y360_U82_HWY360_U6572_ALPS.KK1.MP7.V1.22_Android_4.4.2

[07:52:19] Found 1 file tecno le6
1. Tecno_LE6_H6222CDEFG_R_GL_211101V242

[07:42:56] https://youtu.be/OnO2a3eoz3s
[07:41:56] ok trying
[07:41:33] https://youtu.be/OnO2a3eoz3s
[07:39:27] how can i solved this problem?
[07:36:10] i have a problem
[06:52:00] I will be forever grateful 🙏
[06:50:02] now need ?
[06:47:40] Please I need email ID for support
[06:42:30] help
[06:40:36] Make this https://infinity-box.com/?r=100155
[06:40:36] HWID: 0000C6FD18434082
[CM2]
Serial No (S/N): 3D72C6FD
Firmware version: 0153.02
Box/Dongle misconfiguration
Diagnostic code: 67
=> FACTORY DEFAULT Account:
- Username: 003D72C6FD
[06:39:59] Make this https://infinity-box.com/?r=100155
[06:39:59] === DongleManager [Infinity] v1.92 [11/23/2022 12:29:34 PM] ===
Searching...
Card-Reader: GsmEasy S-Reader 0
HWID: 0000C6FD18434082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Serial No (S/N): 3D72C6FD
Firmware version: 0153.02
Box/Dongle misconfiguration
Diagnostic code: 67
=> FACTORY DEFAULT Account:
- Username: 003D72C6FD
- Password:
[06:37:19] Converted to global rom l forget to back up NV ram NV data so imei null
[06:37:03] Is it possible to repair imei for CPH 2083 Oppo A12
[06:35:36] Please help l have redmi note 10x imei failed to write using cm2
[06:30:35] Guys help with cert file of P20 pro CLT-L09 of sigmakey tool
[06:26:04] I can help you remotely for free
[06:25:00] I can help you fix it but the tutorial is not free
[06:23:06] On which phone?
[06:17:31] I need help please
[06:17:26] Please guys I try bypass Samsung A03 frp but not working. iOS launcher not working, *#0*# not working and also notification bar and disable pro not working
[06:15:42] #CM2SP2 connection issue solution https://infinity-box.com/?r=100192
[06:15:42] Card found : 99D66A7C , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : X6511B
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupport
[06:14:39] Still not working after following this step
[05:58:01] Okay
[05:57:43] OK. so my memory failed me
[05:56:20] The phone is mtk phone
[05:56:20] Are you sure?
[05:55:11] Pls how to remove orange state after boot loader unlock
[05:46:17] Okay thanks.
[05:35:20] Hey can I get Nokia 2.2 TA-1188, downgrade firmware
[05:28:47] Use dis it will work
[05:28:00] Wen connected with test point
[05:27:07] Model .. Android version
[05:26:24] Use test point vro
[05:20:04] And this https://dl1.infinity-box.com/00/pub/?dir=/software/&uid=19319&file=InfinityBox_install_CM2SP2_v2.14.7z module
[05:19:17] if my memory serves me, it is supported. need 5 credits
[04:56:31] Eagerly waiting for cm2 new boot pack update for 67 and 68 series mtk
[04:37:40] Admin please does cm2 support sim unlock for this model
[02:36:42] I made over 9BTC within 5days through forex trade at
https://t.me/joinchat/TFhQkPGugNliNDM0
[01:53:00] Hello how to bypass palmpay security plugin permanently using Chinese miracle 2
[01:41:32] Samsung A125f
[01:41:29] After downloading your flash file from your infinity website, this kept showing this error

InfinityBoxTalks 2022-11-22

[19:55:22] Please who has solutions for tecno kg7h brom black please
[19:49:57] tecno kg5j test point
[19:49:35] use test point brother
[19:35:49] Pls admin
[19:35:45] Admin Pls help me out
[19:33:47] Pls cm2 how can I connect tecno kg5j or cm2 not supported the model? I tried every possible option not working Pls help
[19:32:20] Use cm2 spd 1 u will see read options there
[19:00:25] Pls help how i can read flash file of keypad spd phons from a phone and write to another phone also repair imei with cm2 ?
[18:36:14] Trck dm
[18:35:46] Infinix smart 6 x6511b mdm please help
[18:23:19] apk
[18:17:29] come
[18:08:07] Hello
[17:35:20] Ok
[17:35:12] Not supported with cm2
[17:34:10] Qlc
[17:21:33] Yes possible, test point working ?
[17:11:58] How to fix no wipe reset
[17:06:30] Nokia 105 TA-1174 password help
[16:55:50] Chipset ?
[16:55:43] You\'re welcome
[16:55:33] Wifi or hotspot working?
[16:51:18] Thanks credit to your advise
[16:43:43] Xiaomi note 10 pro frp possible??
[16:43:42] Hi
[16:31:47] Hi
[16:31:33] LB8
[16:16:47] firmware alcatel 7024w please thank you
[15:42:25] Download factory signed firmware and flash bro
[15:39:56] Ok
[15:30:28] select another cpu/loader
[15:30:03] This what is showing
[15:26:10] try and see
[15:26:02] Install Telegram Desktop and send sw log text like here: https://infinity-box.com/?r=100199
[15:25:47] Ok thanks,what about v11 infinix x6511b
[15:25:27] select another format method
[15:24:15] it depends on model
some models need server authentication
[15:23:05] nxt time ban
[15:22:56] I mean red state after flash format after backup and restore
[15:21:41] do you mean read/orange state after bootloader unlock?
[15:21:05] method 2 (for very experienced users)

get this https://infinity-box.com/?r=100202
Make [Identify]
if you will see a message like \"EMI failure\"
Right after that go to \"Cloud\" tab and click to \"Get Preloader\" button.
In case of success you will get from server file with preloaders for your phone.
Unpack preloaders and boot phone again this way: https://forum.infinity-box.com/viewtopic.php?t=9483
Of course you should select one of preloaders that you got from the server
[15:20:47] method 1 - get file from firmware for this phone
[15:15:01] Cm2 Pls solution to red state after flash any solution or can cm2 not capable of this job??
[15:13:33] Yes for Infinix tecno and add direct root options pls
[15:11:21] Can cm2 repair Infinix smart 5 red state
[15:11:09] https://infinity-box.com/buy/
[14:51:02] Nokia x20 ta 1341 password removed
Any solution
[14:25:23] I thought you were attended to yesterday or so?
[14:17:54] Spd cpu
[14:17:42] Hi help mobicel neo frp is support?????
[13:54:31] @Abdulwasii_remote_tech_service
[13:51:22] Help to buy credit
[13:46:16] Please how can I fine the EMI
[13:39:15] Oppo Reno 6 mdm any one can remove payment after done USDT
[13:39:02] Bd4h test point please I need help
[13:35:54] You need 5 credit to unlock
[13:35:42] Recharge your account with credit,
Inbox if you need we are reseller for infinity CM2
[11:53:15] Help
[11:47:09] Bro I have it now
[11:36:55] Realme c3 sim not supported?
[11:29:42] Please frp remove
[11:25:17] 🤦‍♂
[11:24:02] Huawei Bg2-u01 frp suported? spd7731g
[11:17:35] https://t.me/globalsystem4mobile