Infinity CM2, Infinity [BEST] @InfinityBoxTalks 25-Apr-2024 [page 30]

[page-1] [page-2] [page-3] [page-4] [page-5] [page-6] [page-7] [page-8] [page-9] [page-10] [page-11] [page-12] [page-13] [page-14] [page-15] [page-16] [page-17] [page-18] [page-19] [page-20] [page-21] [page-22] [page-23] [page-24] [page-25] [page-26] [page-27] [page-28] [page-29] [page-30] [page-31] [page-32] [page-33] [page-34] [page-35] [page-36] [page-37] [page-38] [page-39] [page-40] [page-41] [page-42] [page-43] [page-44] [page-45] [page-46] [page-47] [page-48] [page-49] [page-50] [page-51] [page-52] [page-53] [page-54]

InfinityBoxTalks 2022-09-21

[17:35:46] firmware version string but not android ver
[17:32:58] Android 12 sir sorry about
[17:17:12] In my pc
[17:16:53] How to get this service
[17:12:05] Yes it was stuck on log
[17:10:35] Yas
[17:09:24] Wait admin intervention
[17:05:21] Internet good contacted
[17:05:00] 5 days to try
[17:04:27] Make sure your PC is connected to Internet, then retry process
[17:01:54] Sir not show status imei and not
[17:01:41] Then lock it back, or is it a must its unlocked?
[17:00:31] Launch cm2mt2 bro, the perform an sp unlock
[16:59:48] Select correct loader sir
[16:59:21] Yes , proceed, at least 5 credits will be deducted
[16:58:32] Found 20 files infinix X657, search limit is 20 files per server
1. Infinix_X657_H8030A_QGo_OP_211001V577
2. Infinix_X657C_H6117GH_QGo_GL_210401V219
3. Infinix_X657B_H6117I_QGo_TR_210826V028
4. Infinix_X657B_H6117EI_QGo_OP_S2_211015V
[16:58:13] Nokia c20
[16:52:32] Hello, anyone with Infinix X657 Nvram
Please.
[16:51:46] Please request network lock solutions
[16:51:16] Hello sir
[16:46:02] Spd,
[16:36:54] select another model/loader one-by-one and try
[16:16:23] plz blackview a70 error
[16:15:49] #CM2SP2 connection issue solution is HERE
[16:15:49] Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[16:12:59] Frp bypass new security pls
[16:02:12] why we use money to buy dongle why you not update bro why MTK phone kill you
[15:56:55] what is 12?
[15:56:31] read this https://infinity-box.com/?r=100189
[15:47:50] 12
[15:12:34] Not implement yet
[15:09:39] reset user lock data safe
cm2 sp2
function disabled
how to enable or use it?
[15:09:00] hi
[15:07:22] I have picture
[15:06:55] send sw log text https://infinity-box.com/?r=100199
[15:06:40] da error
[15:06:31] why?
[15:06:25] not
[15:05:58] select another loader
[15:05:48] use built-in loaders
success?
[14:53:10] Infinix pr652c..getting this error
[14:46:04] da file
[14:44:01] Mtk please
[14:43:47] Somebody help me with this phone firmware Nokia ta-1063
[14:35:57] it tried to flash this phone using a file i downloaded i now see nvram is damaged what is the solution
[14:32:55] Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : USB Serial Device (COM65)
MODE : BOOTROM
PORT : 65
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 0754CC13E8100716DB37605AF8381093
BROM : SecLevel : 0x0000
[14:31:04] Thanks

the model is Techno T901
[14:27:38] Let me do the identification i end the info here
[14:27:31] Model...?
[14:26:28] I have done that many times
[14:23:59] Account is disabled now due to password was sent to all users.
you must contact to support voa e-mail to unblock

good luck!
[14:22:48] Please I need help
[14:22:42] I have the same username and password on my infinity dongle but CM2SP2 says incorrect password
[14:22:36] What is the problem?
[14:21:56] > sp flash by albastuz3d
Ask albastuz3d for help
[14:21:35] Boot keys....volume up and down at once
[14:20:45] Install drivers or use boot keys
[14:18:33] Photo from Bonfray Quadrillion
[14:18:29] SoC Drivers are here https://infinity-box.com/support/
[14:18:09] What is the firmware verson?
[14:11:13] Pls link to spd drivers for Windows 10
[14:07:49] Next time read phone info and backup before flashing a new file
[14:07:14] And put a new file according to it\'s version
[14:06:48] Disconnect battery
[14:06:14] Phone
[14:06:03] I flashed y6s on sp flash by albastuz3d my is now dead. Any advice?
[13:58:41] Pls how do I setup spd cm2...phone keeps charging when I try to connect
[13:52:53] It\'s an MTK device
[13:52:37] Okay how to unlock sim lock on Cricket Dream device?
[13:51:06] Nothing found for Tecno KG5J

If you will get the file upload it to support with iosFileUploader

[13:50:59] Unlocking bootloader
[13:50:52] Alright
[13:50:44] https://infinity-box.com/?r=100198
[13:50:38] sw log text?
[13:50:34] Easybuy spd solution..?
[13:50:07] What?
[13:49:50] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[13:49:34] hello bro can you share to me kg5j costum DASW
[13:49:21] you must read text always
In that case you must just boot phone several times, as it was suggested by software.

Anyway if you do not want to read software messages you can ignore it and just use google serch how o connect different models
[13:47:53] hello
[13:44:25] Found 26 files bd1, search limit is 20 files per server
1. Atomu_Atomu_AL20B_BD1.0.0.50_BoardSoftware_general_8.0.0_r1_EMUI8.0_05022JHS
2. Huawei_Honor_Dura_L42_BD1.0.0.29_BoardSoftware_general_NA_Google_05022LWG_DRA_LX5_BD_1.0.0.29_180827101333
3. Winmax_Winmax_BD16_WINBOND_W25Q32
4. [13:44:12] Nothing found for bd1 fdl

If you will get the file upload it to support with iosFileUploader

[13:43:34] \\bd1 fdi
[13:37:13] initailly storage was clone
[13:36:44] A video has been sent try that
[13:34:17] what result to this?
[13:34:05] Please post your log on this
[13:31:52] https://youtu.be/UeX9Os9Oz0E
[13:29:55] Found 10 files Tecno BB2
1. Tecno_BB2_VP572DE_QGo_OP_210812V011
2. Tecno_BB2_VP572DE_QGo_OP_211011V012
3. Tecno_MT6580_TECNO_MOBILE_LIMITED_TECNO_BB2_8.1.0_BB2_VP572ABC_O_GO_200608V9_O11019_k80_bsp
4. Tecno_BB2_VP572ABC_O_GO_200904V1
[13:28:43] From 64gb to 32 after flashing again reduced to 16gb
[13:28:05] Tecno LC8 storage reduced after flashing, what could be the cause?
[13:27:18] https://youtu.be/UeX9Os9Oz0E

Here the Video brothers
[13:26:54] Please solve this issues
[13:22:07] Infinix X665B
[13:20:00] Okay I don\'t have the device with again
[13:17:48] baseband status ok?
[13:16:54] THAT means device freeze, alternative force restart with all side buttons pressed.
[13:15:16] Please help
[13:15:11] MODEL?
[13:09:03] why not
[13:08:03] alternative \"HMD\"
[13:06:26] I have some youtube video show how to remove easybuy after you flash with CM2 , its 35min video ,if admin will allow me to share the video
[13:05:57] Friend,
Have you read text at the middle of your photo?
[13:04:31] Yes
[13:04:09] yes solution available but out of the scope of this tools...
[13:03:13] is imei on device same as imei on phone?
[13:02:20] hope not hardware problem check power switch and battery
[13:00:36] Still network locked after a successful unlock
[12:56:44] Where is sw log text?
[12:56:20] On my normal platform CM2 I can\'t connect phones with MT6761 chipset
[12:45:02] Hi,
It may depends on version.
Try and see result.
[12:44:04] use another loader, it works
[12:43:08] is not working
[12:41:55] Are you Ok?

You ,ust post here screenshot of your account with 10 credilts
[12:41:22] Ok sir what about this
[12:40:12] you must signin here https://infinity-box.com/service/
and you MUST send screenshot
[12:39:45] It’s ok sir
[12:39:22] you are liar
unlock cost 5 credits but not 10
[12:39:04] where is screenshot of your account?
[12:39:03] It’s ok
[12:38:48] It\'s lie
[12:38:26] I do 2 time for same phone and same model fest time takes 5 credits and thrd takes 5 credits too that’s I mean not for a one time takes 10credit no
[12:37:06] I don\'t see this model yet here https://infinity-box.com/
you may try goodge for now
[12:35:08] Hw i can format????
[12:34:09] you mst post your account screensho with 10 credits!
it\'s last message to you
[12:33:34] Nokia c21
[12:32:26] you must post screenshot with proof now
In case of no screenshot you will be banned here permanently for your lie
[12:31:51] Never lie
[12:31:13] Do not lie!
[12:31:01] What is the firmware version?
[12:30:31] After fest unlock wait for 10/15 minutes and repeat again takes 5 credits too
[12:30:13] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[12:29:53] Nokia TA-1400
[12:29:31] you must post proof here within 15 minutes
[12:28:37] What is your same issue?
[12:28:19] And nokia c21 TA 1352 failed unlock
[12:28:00] model name?
[12:27:22] Sir, lie is not allowed here.
If you did not checked your account and you say you was charged twice - you are liar.
Now you must open your account and post here proff of your words about 10 credits.
Do it now
[12:27:14] Plz heelp format by cm2
[12:26:08] I don’t have but Order transaction ID:1036239/1338880
[12:15:10] What was initial problem?
Stuck on boot logo?
[12:12:06] What is the problem with it?
[12:11:42] https://infinity-box.com/?r=100198
[12:11:12] where is screenshot wth 10 charged credits?
[12:10:39] this model can be connected well
you must check what loaders to select, see this thread https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/

also you may try woth lateest beta version but remember - it\'s for advanced users only
[12:08:32] you can check here what base/DA you can select for your model https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/
[12:07:21] Dongle or Credit?
[12:06:51] Nothing found for Tecno BD4H

If you will get the file upload it to support with iosFileUploader

[12:06:21] Found 2 files Tecno BD4
1. Tecno_BD4_SE656B_RGo_RU_211102V3
2. Tecno_BD4_SE656BCEF_RGo_OP_211020V5

[12:05:26] try using cm2mt2 with sp unlock function
[11:09:38] #CM2MT2 connection issue solution is HERE
[11:09:38] BROM : 0x00007024 : DA SEND ERROR
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC
[11:08:06] any one can have a boot file y1s plz
[11:07:44] vivo 2015 y1s passward not opening by cm2 asking a boot file
[10:47:49] is it possible to backup firmware for Nokia TA-1400 and Nokia TA-1485?
[10:42:56] Admin help pls!
[10:39:25] Didn’t work, the phone is x665b
[10:33:03] #CM2MT2 connection issue solution is HERE
[10:33:03] Operation : Identify Device [ v2.35 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM19)
MODE : PRELOADER PORT
PORT : 19
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SB
[10:07:17] True
[10:05:28] BB2 files
[10:01:41] Nokia c10 takes 10 credits unlock refund 5 credits please
[09:53:36] Any solution for it brother?
[09:43:09] This is easy buy
[09:02:40] Am fauz help smart 5 imei
[09:01:57] Hi bro sap
[09:01:36] Good day sir
[08:55:23] Phone doesn\'t recognise device again, except I disconnect battery
[08:46:06] Apk
[08:44:14] It\'s App which will root
[08:43:57] Do Twice Cm2 will add setting in DB
[08:39:10] Guy plz why do I get this
EMI SETTING HAS BEEN CHANGED
CONNECT DEVICE AGAIN WITH NEED OPERATAION
[08:39:07] Is it PC App or Apk
[08:24:34] Thanks I\'ll let u know if I manage
[08:24:14] Okay
[08:23:43] If he comes up with a solution please let me know
[08:23:18] Try contact admin for that
[08:19:05] I have to connect to backup NVRAM
[08:17:33] Okay. But the problem still remains of not connecting
[08:12:54] Magisk
[08:09:24] What Rooting App can you recommend
[08:07:09] Download latest mtk drivers
[07:52:27] Once it goes off, just remove battery and put back
[07:51:19] Then it say
UNKNOWN RESPONSE
flashing failed
[07:47:20] OK thanks so then how to reset it now
[07:44:03] What could be the problem it stuck here when am flashing
[07:35:50] supporter
[07:34:14] And it I try it so many time to connect, it just goes off and will come on after a day or 2.
[07:32:37] I have same issue connecting it too
[07:31:56] Yes mt6761
[07:31:07] How to flash this backup plz 🙏
[07:31:01] Boot type is MT6761?
[07:30:38] Yes
[07:30:24] It\'s that the log for the phone ?
[07:29:26] First backup NVRAM then erase and flash it then root the phone and delete that admin app
[07:28:48] Also can\'t connect to cm2 dongle
[07:28:17] MTK
[07:26:52] MTK or SPD?
[07:24:27] Need Nokiata1030 nvram please
[07:22:27] Need Nokiata1030 nvram please
[07:20:49] Hello. Please I need help with this. Infinix X665B .
[07:17:55] Nokiata1030 nvram please
[06:58:28] Hi. Nokia C10, C20, C21, C30
POSSIBLE UNLOCK LAST VERSON?
[06:55:57] You can try to insert Smart-Card into another Card-Reader and try..
It should be Ok with other boxes/readers
[06:51:24] Beta
[06:47:01] Where you have 2.36?
[05:50:43] i mean drivers signature
[05:47:20] disable drive signature and reboot then do the operation
[04:47:22] Show the picture driver yellow
Whats means
[04:45:57] I installed all
[04:41:25] All drivers on support
[04:39:03] Plz team helm me
[04:38:34] I have problem with nokia spd drivers 👆
[03:39:43] Nokia Closed Diag mode in Latest Security,

InfinityBoxTalks 2022-09-20

[23:10:42] Ok
[23:10:29] Uninstall old driver, Download and install from infinity support
[23:09:32] Cant find bro, or its need windows 32bit
[23:09:00] Yes, install drivers
[22:44:21] Hello, i have cm2 smarcard is it possible to use nck box with it?
[22:37:29] Work on Qualcomm devices
[22:32:41] Found 5 files Archos 97
1. Archos_SP7731GEA_ac50cne_4.4.2_TBW961215_9715_V011028_ARCHOS.20150803.093440_ARCHOS_50c_Neon
2. Archos_SC7731_SCAC40PO_ac40pov2_6.0_BS976B_AC40PO_20180709_V18_MP_ARCHOS.20160828.152324.Gnaphalium_Archos_40_Power
3. Archos_MT6572_archos_ARCHOS_40C_TIv2_ac40ctiv2_4.4.2_SW_W976
[22:19:14] Firmware please
[22:18:43] Archos 97 Platinum hd
[21:40:42] Infinity cm2.scr.1.07.fil
[20:50:39] What issue do you encounter?
[20:49:35] Samsung on easybuy???
[20:08:39] https://t.me/nckpro2❤️
[20:03:56] https://forum.gsmhosting.com/vbb/f296/mtk-sec-2022-models-can-not-boot-3017035/index4.html#post14644569

VIVO New Security closed
[20:03:33] What\'s the way forward
[19:48:01] Yes
[19:42:50] KF7j brom solution
[19:42:04] Send pic let me see the phone
[19:41:23] SPRD3 CPU
[19:39:50] TECNO SPARK 8C KG5K android 11
[19:36:42] Yes sir
[19:32:40] It\'s for advanced testers. Some kind if new features are there but it\'s for very experienced users only
[19:29:24] Admin please what the use of this Cm2 beta?
[19:27:28] https://infinity-box.com/?r=100198
[19:26:53] Admin Pls how can I remove easybuy on Samsung A12
[19:26:00] 😳😳😳👍
[19:18:37] I\'ve read that page before
I saw a video on YouTube that some one boot this model (A022F U3) with cm2mt2

but in my case I checked every thing and I don\'t know why it can not boot the device correctly
[19:17:07] Is it from US?
[19:09:47] Model name : Cricket EC211004
[19:09:05] That\'s the device
[18:58:29] Hi,
Good question.
What is your skill level? I need to know it to start explanation
[18:58:21] Hi silicon, qualcomm.
[18:57:09] What models, CPU and function?
[18:56:55] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[18:56:19] What is Cricket Dream?
[18:52:52] Bro do not use the platform you select, change to first option on platform settings
[18:51:53] Nothing found for bd4h

If you will get the file upload it to support with iosFileUploader

[18:51:27] model
[18:44:52] I\'m not on his issue but just suggesting
[18:44:29] Hi guy\'s why now Nokia c10 & c20 not working reset factory via diag
[18:43:58] Model and android version?
[18:42:55] It should auto detect
Exapmle any 1~Mtk shld automatically be configured
2~ same as spd 7731. 9830
3~ same as qlcmm
Etc.
Not all other boots that cause confusion. Firefly and others.
Simply things
[18:38:24] Improve on Huawei chipsets
[18:37:40] I don\'t want to insult you or others
da missmach error was my first question
[18:32:15] Please Cricket Dream sim lock solution on CM2
[18:07:14] info@infinity-box.com
[18:06:31] DM me bro need to talk about business
[17:59:53] Did you read that supporters told you several times?
Open your eyes and read text given by sooftware.
two times you got error message in log text:

DA : BOOT 2ND DA FAILED!
and
DA : BOOT 2ND DA FAILED

Nxet time you must open your eyes and use your brain before insult supporters!
[17:46:47] Let me remind you that insult other people is not so good idea.
You must leave this chat.
If you need technical info you must use support forum.
Link to forum is at official web site.
Bye!
[17:10:03] yes brother
[16:46:13] Sorry sir, Is it message to me?
[16:44:18] im not nube bro
ive done this things before
[16:44:18] i want to read firmware
there is no issue
[16:44:18] same error
[16:44:17] Operation : Identify Device [ v2.36 ]

Mode : FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek USB Port_V1632 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL:
[16:44:17] thats the log
[16:44:16] PTFN : MediaTek USB Port_V1632 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : C009287321A13F0075C779EE709F2B0C
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3E4A760657A1FC7B77D37DC4765D8508743167B19F0B8B993592AF09650A8ABF
BROM : SLA : Local Auth
BROM
[16:44:16] did you read what i wrote?
i checked local ssla

in firefly the read firmware button is grayed out
how should i read the firmware?
[16:43:47] a22 u3 read firmware
[16:32:33] Thanks, moved to support server!
[16:27:55] it may he HW or SW prob
you can try
[16:27:19] What is the problem?
[16:27:15] Samsung a135f mdm
[16:26:48] is there any solution?
[16:26:12] Tecno k7 rebooting, can I flash format?
[16:21:45] big problem
In this case I think you must use TP
[16:21:32] 😐
[16:21:29] they say I can\'t post I don\'t have 10 post
[16:21:01] register there bro
3 min your time
[16:20:45] I can\'t post to gsm forum because am not member
[16:20:09] post all to forum now
I asked engineers to come there and check your serious problem
[16:19:41] here bro https://infinity-box.com/?r=8
[16:19:37] first time Tecno Raphael v2 work but now not work after phone been updated its seems phone need custom DA
[16:19:16] ok
post ALL your tries log text to support forum please,
I am waiting
[16:18:35] not solved bro I select all model not support
[16:18:02] Good
Solved now?
[16:17:30] kg5j
[16:17:19] ok you help me to post I already post a problem
[16:15:07] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[16:11:31] Select another loader
use default built-in loaders first
see first image here https://infinity-box.com/?r=100186
[16:05:37] ok
[16:05:36] Try here @FlashFileSearchBot
[16:05:36] Need file for Nokia c1 ta1165
[16:05:16] Try this boot file by cm2 sp2
[16:01:24] here spark 8c not work mt6761 android 11
[16:00:08] There is also spd bro model is pr651h
[15:59:46] Tecno spark 7 is mtk A25 cpu
[15:56:04] Any help
[15:54:36] Plz screen shot from download mode
[15:52:52] Which procedure kindly
[15:52:19] this is identify

Open : PR651H-F6317-11.0-OP-V057-20211213.pac
VER : BP_R2.0.1
LEN : 4.18 GiB
CPU : s9863a1h10
VER : PR651H-F6317-11.0-OP-V057-20211213_1549

Reading package ...
Read package finished!

Operation : Identify [ v2.11 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR651H-F6317-11.0-OP-V057-20211213.pac
Sending Init B
[15:51:16] Try Use fast check from infinity it work on Samsung wipe and frp
[15:50:23] Try select boot and try
[15:49:47] Is there test point for this phone ???
[15:48:47] Samsung a03s testpoint not working
No wipe data option in recovery
Not booting to brom
Any help?
[15:48:00] In brom sla mode
[15:43:02] In brom it detect nothing
[15:42:25] Let me put on preloaded mode you see
[15:41:01] where i sw log text?
[15:40:45] Tecno kg5j frp problem… not detect on brom by pressing volume buttons
[15:39:51] Post problem details to support forum https://infinity-box.com/?r=8
- device name
- information about the problem with the device
- software operation text from log file https://infinity-box.com/?r=100199

Do not attach images there but only copy/paste software log text
[15:39:32] Post problem details to support forum https://infinity-box.com/?r=8
- device name
- information about the problem with the device
- software operation text from log file https://infinity-box.com/?r=100199

Do not attach images there but only copy/paste software log text
[15:39:12] Ok let me send
[15:38:36] No idea
you do not send sw log text :(
[15:37:49] No I can\'t it gives error not initialized but I initialized it but identifiy and read but it gives always this error
[15:37:33] Here is INIFNITY support but not a mobile phone repair school/
If you have a problem with Infinity oftware you must post problem details, software version and operation log text
[15:36:22] Good
do it
[15:36:11] use search at support forum or check Infinity web site main page
[15:36:02] Detector did not identify it
[15:35:52] I want to read fw from device it\'s spd spark 7 pr651h
[15:35:23] Redmi note 8 I want to factory reset/frp, which CPU to use
[15:34:13] What is your problem?
[15:32:55] Admin no response to my question,why?
[15:32:02] send sw log text https://infinity-box.com/?r=100199
[15:31:51] What is the problem?
send sw log text https://infinity-box.com/?r=100199
[15:11:18] Cm2 sp2 always says error device not initialized initialize it first by identifiy but I already did that I identity then remove cable and read firmware but it always gives error device not initialized any help
[15:02:46] Need these drives for windows 10 64bit
[14:56:13] Indonesia need Update CM2MT2 / CM2SP2 boot pack 😁🙏

Realme
Oppo
Vivo
Xiaomi
Infinix
[14:53:05] Sm-a025g cm 2 have this mode frp support
[14:49:25] @infinity need this driver\'s
[14:48:48] driverhub
[14:48:34] I need this driver for windows 10
[14:39:22] Ok
[14:38:46] Nothing found for Tecno bd4h

If you will get the file upload it to support with iosFileUploader

[14:38:21] Click here @FlashFileSearchBot and type there phone name. You will get links
[14:38:06] Estimation https://infinity-box.com/price/
[13:47:44] Infinity price
[13:22:22] Pls who will come to my help
[13:15:00] Solution please
[12:46:44] Tecno bd4h flash file please
[12:46:29] LG 322dl unlock support?
[12:45:59] im not nube bro
ive done this things before
[12:44:58] repower handset first then repeat
[12:44:25] i want to read firmware
there is no issue
[12:42:28] what issue in handset
[12:42:21] Tecno bd4h flash file please
[12:41:12] same error
[12:41:03] Operation : Identify Device [ v2.36 ]

Mode : FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek USB Port_V1632 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL:
[12:37:35] It can\'t be 2.35 boot pack , it should be 1.12 boot pack
[12:30:10] 🙏🙏🙏
[12:28:54] https://infinity-box.com/?r=100202
[12:24:44] thats the log
[12:24:39] PTFN : MediaTek USB Port_V1632 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : C009287321A13F0075C779EE709F2B0C
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3E4A760657A1FC7B77D37DC4765D8508743167B19F0B8B993592AF09650A8ABF
BROM : SLA : Local Auth
BROM
[12:23:55] did you read what i wrote?
i checked local ssla

in firefly the read firmware button is grayed out
how should i read the firmware?
[12:22:11] Vivo 2015
[12:20:06] select another cpu and model
[12:19:29] What is the model name?
[12:18:32] Please
[12:13:29] Redmi note 8 how can I wipe/frp with cm2?
Admin with detector -NO vendor info.
No model info.
[12:08:50] #CM2MT2 connection issue solution is HERE
[12:08:50] Load IDBase v312457 Ok!
Operation : SP Unlock [ v2.35 ]
Mode : FLASH

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM22)
MODE : PRELOADER PORT
PORT : 22
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SD
[12:01:38] ta-1396 unloking
[12:00:07] Solution please
[11:56:16] Hello boss, can I do carrier unlock with infinity best?
[11:51:09] That\'s what I got and the phone bricked
[11:32:57] https://infinity-box.com/?r=100198
[11:32:49] How to remove permanently Easybuy on SPD phone
[11:32:03] Hi
[11:31:51] https://infinity-box.com/support/
[11:31:30] good
read info and make as per given instruction
Result?
[11:30:01] https://infinity-box.com/price/
[11:29:46] reboot PC and try again
[11:29:24] It\'s version for advanced testers
Check text written at top of download page
[11:28:35] Don\'t send photos, we ignore it in most cases.
If you want to get an answer you must send software text https://infinity-box.com/?r=100199
[11:11:49] How can this e used
[11:10:12] No download link
[10:54:42] to which carrier
[10:54:33] After selecting the top platform then I uncheck firefly, this was the next result
[10:54:19] Yes what is the difference
[10:53:17] iphone 5 network unlock
[10:53:04] Its only charging
[10:52:55] I tried unlocking my nokia c20 and its no more working
[10:33:39] What the difference with the old one
[10:20:28] Nothing found for joy8

If you will get the file upload it to support with iosFileUploader

[10:13:10] Before flash
[10:03:59] What is \"blocked on the logo\" means?
[10:03:43] What firmware version was written to phone?
Where is software log text for flash write process?
[10:00:34] Tecno kc2j blocked on the logo i download thé firmware on infinty box server After flash it does not Star anymore and when i do read info hère is what it give
[09:57:06] Found 4 files kf6j
1. Tecno_KF6j_H6218A_R_GL_210903V553
2. Tecno_KF6j_H6218A_R_ZAVC_210531V522
3. Tecno_KF6j_H6218A_R_ZAVC_210811V548
4. Tecno_KF6j_H6218A_R_GL_210311V363

[09:50:58] infinity
[09:50:05] Do download link
[09:40:25] Also next CM2MT2 beta version is here https://infinity-box.com/?r=100202
[09:39:20] translate.google.com
[09:38:58] Infinity #CM2MT2 boot pack v2.35 released https://infinity-box.com/news/?r=4270
[09:38:44] Le téléphone blocait sur le lobo j\'ai téléchargé le firmware sur le serveur infinty et j\'ai flashé après flash il ne démarre pas et quand tu fais read info voici ce qu\'il donne
[09:13:04] Password locked
[09:12:03] make sSLA box checked and see more here https://infinity-box.com/?r=100189
[09:11:25] What was the problem before flash?
Where is sw log text?
[09:09:53] Nothing found for 059T922

If you will get the file upload it to support with iosFileUploader

[09:09:48] Not yet. Client on her way to the shop
[09:09:20] sorry plz
[09:08:50] I am very sad to see your previous lie
[09:08:24] you must write here model name AND software log text of your failed attempts
Where is it?
[09:07:58] thanks support now i have access again on cm2 thanks
[09:07:39] See here how to change boot settings https://infinity-box.com/?r=100189
Try it and post result
[09:06:48] Did you try it?
[09:05:54] Lie is not allowed here!
You got an answer via e-mail yesterday!
Next lie gives you permanent ban here. Bye
[09:01:36] First choose your device from cm2sp2 or cm2mt2 if you don\'t know your device or device not listed in bootpacks please do these: i.e itel S15 in cm2sp2 select sc7731e and correct boot will pop up automatically appear ,here click identify device (deep information) after tool identified your device unplug phone from USB stick and go back to services and select either read nvdata or go to flasher and select read firmware, your tool will do it automatically within a few minutes.
[08:37:41] read info first
[08:36:26] Yes
[08:35:51] Please i need guide line on how to copy nvram file from the phone with cm2sp2 and mt2, and if I want to make the used of it,where can I locate it on my p.c
[08:10:18] nothing sapport can do for me
[08:08:18] sapport i need your help nothing i can do until now plz help my dongle lost and no any answer from sapport what this
[07:55:30] mtk?
[07:47:31] Can cm2 reset OPPO A57?
[07:45:53] A022F u3 cant send 2da
da missmach error

firefly works
but read firmware option was grayed out
[07:35:03] Use Raphael it will do
[07:24:21] What is svc in full?
[05:59:04] Most of them brom is getting disabled
[05:53:57] Cm2 should update their cm2mtk2 boot pack because we can\'t flash Tecno/infinix phones with latest security
[05:46:20] Use dongle manager update it and problem solve
[05:39:40] Untick Auto emi it will work
[05:38:00] Try use local sla
[05:36:44] PLEASE
[05:36:36] LINK FIMWARE RM 944 059T922
[04:54:54] I recomended all infinity user to use V.2.34 and bootpack of v2.33 and for Xiaomi MTK use Beta Version 2.36 and bootpack of v2.33

Otherwise you can got failed on your work
[04:36:09] Steps?
[03:42:49] this model is not supported
[03:42:02] Please I need a file that I can use to bypass Samsung account on Samsung g920f version 7
[03:20:47] I Knowing that my
investment is in safe hands got excited Mr
Thomas kralow made that possible with her
excellent trading technique beginning
this great journey I invested $1,500 as
capital and in a few days I got a return of
$15,800.Her transparency reliability and
diligence is undeniable.

https://t.me/joinchat/lxOdIl2xh7xlMWM0
https://t.me/joinchat/lxOdIl2xh7xlMWM0
[01:07:42] Will try today
[01:01:22] Please upload any one
[01:01:07] Ya
[00:57:50] Lava ?
[00:48:00] Any one upload this model flash file please

InfinityBoxTalks 2022-09-19

[23:48:38] A022F u3 cant send 2da
da miss machine error

firefly did boot
but read firmware option was grayed out
[23:47:05] A022F u3 cant send 2da
[23:45:06] Redmi note 11 pro 4g
[23:44:54] I flashed it and now it doesn\'t come up
[23:23:49] Ok
[22:34:17] use built-in loaders
[22:33:14] select another base/model
[22:17:26] I don\'t understand sir
[22:16:15] Da file for x665b infinix
[22:12:24] What is your same there?
[22:11:34] read text and do as per instruction
[22:11:07] What is your exactly the same issue?
[22:10:47] reboot PC
[22:10:23] select other loader
[22:09:56] select top platform
[22:09:27] Setup server access https://infinity-box.com/?r=100166
[21:30:44] Same here boss man
[21:26:31] He just asking?
[21:25:22] 2112 on O-base
[21:25:14] before admin notice
[21:23:24] delete this
[21:21:24] Select model from drop down list
[21:21:22] Done by unlocktoolz
[21:20:11] Have you tired this on UnlockTool
[21:19:36] 😭😭😭😭😭😭😭😭
[21:19:13] Issue facing when trying to reset Frp on infinix x665b
[20:18:42] Exactly the issue am facing
[19:47:08] That\'s the normal mode bro
[19:46:13] It will brick
[19:46:05] The phone won\'t connect proper
[19:35:06] Select this bro
[19:33:54] Select this bro
[19:28:40] Please help me itel p36 flashing
[19:18:10] How do I enter password & username on cm2
[19:15:16] Sams issues
[19:02:58] Admin please help tekno CG7 sp unlock is it posible,mm
[19:01:03] Before changing the platform?
[18:59:39] untick firefly
[18:57:37] Like no place to click flash
[18:57:17] No sir, on the flash tab nothing is highlighted
[18:56:33] So it\'s Ok.
Good
[18:56:07] It\'s on a different platform
[18:52:59] any problem?
[18:52:30] 3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek USB Port_V1632 (COM61)
MODE : BOOTROM
PORT : 61
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : E0DAF8D93B282BCD482970F5CD228075
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 8A01554EF2BC2
[18:51:09] Dear Sir,
I see nothing at ypur photo
give me error text that was returned by software
[18:49:54] I am waiting your result!
[18:49:30] check text at last line here, it should be an answer there
[18:49:12] Taught I can get the solution here the boot is there as matter of fact I remove Frp with the boot. But when I try to back it show initiazie device firest which did but still did not work
[18:47:45] Ok
[18:47:39] I changed the platform
[18:46:40] you can send any way
to telegram or to support forum
as you wish
[18:46:03] I get you if I copy should send it here or where?
[18:45:25] Okay
[18:44:20] Power-On your PC, install Telegram Desktop there and copy text to it
[18:43:39] Yea
[18:43:14] Do you have PC?
[18:42:35] I don\'t understand you sir. I know I know ctrL+C is copy but the V I don\'t understand any anyway after that what next?
[18:35:09] e-mail is not instant
[18:34:47] I see nothing at this nice photo.
give me text my friend
[18:33:50] use Ctrl + C and Ctrl + V keys
[18:33:33] Any idea boss or any new file🙄🙄 it still wit me pls
[18:32:47] Help pleass
[18:30:20] I\'m sorry, it\'s because the operation logs showed twice, that\'s why I thought that the credits have been charged twice, but it\'s not, but another day I\'ll go to the IOS account for more certainty, rather than checking the operation logs. I\'m very sorry. The charged credits was 5.
[18:14:35] Just download factory firmware flash direct you cannot kill the phone
[18:11:17] After opening the operation log text with notepad what next
[18:07:30] click to link please and see how to send here software operation text
[18:07:27] Want read the file
[18:05:54] What do you mean by send log text
[17:46:24] untill this time no replay i got from support
[17:41:17] Wow
[17:29:47] 3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek USB Port_V1632 (COM61)
MODE : BOOTROM
PORT : 61
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : E0DAF8D93B282BCD482970F5CD228075
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 8A01554EF2BC274670ECD9408A5
[17:27:36] That\'s Tecno BD4h I couldn\'t flash it because on the flash tab nothing is highlighted
[17:27:16] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[17:26:49] send sw log TEXT https://infinity-box.com/?r=100199
[17:25:55] Please I need help on this
[17:19:03] DA : BOOT to 2nd DA...

DA : BOOT 2ND DA FAILED
ERR : 0xC0070004
ERR : DA_HASH MISMATCH

Error : Fail to init protocol
>>> Remove battery and cable. Check cable/connection/drivers and repeat operation!

Reconnect Power/Cable now
[17:18:27] send sw log text https://infinity-box.com/?r=100199
[17:18:12] Say DA ERROR
[17:17:48] Nokia TA-1380 network lock help members thank you
[17:12:01] PTFN : MediaTek PreLoader USB VCOM (Android) (COM29)
MODE : PRELOADER PORT
PORT : 29
Waiting BOOT ack...
PRELOADER : ACK confirmed
INIT : META confirmed

Boot done

AP_CHIP : MT6768
AP_SWTM : Wed Oct 13 18:06:24 CST 2021
AP_SWVR : alps-mp-r0.mp1-V8.24.1_reallytek.r0mp1.k61v1.64.bsp_P87
MD_CHIP : MT6768
MD_SWVR : TK_MD_BASIC_HW

IMEI[1] : 356524012332645
ID0 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC :
[17:09:22] Nothing found for bencoc5

If you will get the file upload it to support with iosFileUploader

[17:09:02] Nothing found for benco c5

If you will get the file upload it to support with iosFileUploader

[17:06:24] Vinko C5 pac file needed pls
[16:54:20] I need help
[16:45:42] Please on this platform, flash tab functions are not highlighted
[16:37:30] Please team.. Can you add operation date and time for infinity cm2mt2 operation logs... 😊😊
[16:30:38] #CM2MT2 connection issue solution is HERE
[16:30:38] S/N: C4F7269A v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.35

Load IDBase v312457 Ok!

Can not get data from server
Username or Password is wrong, set it at Settings tab
How to configure server access https://infinity-box.com/?r=100166

Load IDBase v312457 Ok!
Operation : Reset SimLock state [ v2.35 ]
SECBackup : Enabled

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM29)
M
[16:29:18] Vivo y21
Security august
Not work
[16:21:07] hi infinty team nokia best 2 and samsung qualcomm stop update
nokia best 2 2 years no update
qualcomm 5 years no update
samsung 3 years no update
plz plz team BoOm update
😉
only mtk
[16:18:47] Admin
[16:16:05] Make this https://infinity-box.com/?r=100155
[16:16:05] Cm2 smart misconfiguration ..help
[16:14:05] Have you fixed it
[16:14:04] I also tried it with test point with cm2 bu failed
[16:12:07] Infinity team should update cm2mtk2 boot
[16:11:56] Make this https://infinity-box.com/?r=100155
[16:11:56] Admin : pls my cm2 showing smart card misconfiguration
[16:00:53] And on flash tab nothing is highlighted
[15:59:10] Please I couldn\'t connect Tecno BD4h on CM2 normal platform
[15:49:12] Alright
[15:45:10] Yes, right way!
[15:45:03] For now google helps.
TP collection will be released later.
You can install Infinity-Pinout package to get some of them
[15:44:47] now am waiting for support answers
[15:44:22] Perfect!
[15:44:15] yeh its clear i have done it
[15:43:00] Sure I can open it if you can point where the test point is located
[15:41:44] but need to open phone. Not easy way
[15:41:17] or use test-point
[15:41:06] Alright am with you sir
[15:41:01] another way - wait
[15:40:46] Boss I don\'t have any connection to Carl are sir
[15:40:02] another way - wait
[15:39:57] from factory
[15:39:41] How will I get factory loader sir
[15:39:06] Ok
[15:38:58] or factory loaders
[15:38:41] Test Point
[15:38:21] I don\'t understand TP sir
[15:37:24] TP
[15:37:11] I told you 3 (three) time that you MUST SEND EMAIL

is it clear or not now?
[15:36:48] Is it clear or do you need more info my friend?
[15:36:12] Admin please any solution to phone with disabled BROM like KF7j
[15:32:48] what can i do to transfer my activation
[15:32:20] yeah only that i have now
[15:31:33] clear?
[15:30:46] i left with infinity best only what can i do
[15:28:54] Admin what\'s the way out here
[15:19:44] What search
[15:11:13] Itel p36 fdl file please
[15:10:49] What do you want to do after identify?
[15:05:11] I have tecno CG7 network unlock
[15:04:53] Hi admin
[15:03:29] Nothing found for Hisense u50

If you will get the file upload it to support with iosFileUploader

[15:03:18] send sw log text https://infinity-box.com/?r=100199
[15:03:00] Make this https://infinity-box.com/?r=100155
[15:02:49] Send e-mail message to help@infinity-box.com and support helps you to register it
[15:02:21] translate.google.com
[15:02:10] Send e-mail message to help@infinity-box.com and support helps you to register it
[15:01:28] Ok
[15:01:17] copy/paset se log text here
[15:00:43] sw log text?
[15:00:32] Make this https://infinity-box.com/?r=100155
[15:00:24] Make this https://infinity-box.com/?r=100155
[14:59:45] send sw log text https://infinity-box.com/?r=100199
[14:59:11] What was the problem before flashing?
[14:58:59] Please check list of available options here https://infinity-box.com/price/
[14:57:31] Just try with default boot selection and send sw log text
[14:46:42] Make this https://infinity-box.com/?r=100155
[14:46:27] is it stuck on boot logo?
[14:45:38] Are you sure?
Please send here screenshot of your account with 10 charged credits, I will check
[14:44:39] Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[14:44:21] is it stuck on boot logo?
[14:43:54] Ok
Do you have that file?
[14:38:51] Nothing found for TA-1325

If you will get the file upload it to support with iosFileUploader

[14:38:39] send sw log text https://infinity-box.com/?r=100199
[14:38:18] How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[14:38:12] How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[14:37:56] How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[14:37:31] Nothing found for Vinko C5

If you will get the file upload it to support with iosFileUploader

[14:37:15] Some kind of server calculation (like spd auth) works with renewed support only
Software says: Support expired 2021-09-06 please renew it
[14:36:33] Ok Sir Thank You
[14:35:47] translate.google.com
[14:35:05] you must delete hundreds of your useless spam posts.
Do it now to avoid permanent ban.
Next time you must use your brain before use this group
[14:33:47] Hi
im need nokia 6120c frimware
[14:33:42] Is it\'s exactly the same or little bit different?
[14:31:04] You can not type password at your smartphone keyboard well.
Use PC my friend
[14:29:43] Type: Infinity-Box/Dongle [CM2]
S/N: AD932360
Username: 00AD932360
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0152; Expired: 27-Jan-2022

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period
[14:29:30] CM2MT2.exe may helps. Try it
[14:29:02] Serial No (S/N): AD932360 plz check status
[14:27:57] use e-mail https://infinity-box.com/contact/
[14:26:25] Lost dongle can be blocked and in some cases activations from it can be moved to another one.
Send e-mail message to help@infinity-box.com
[14:26:12] hello everyone
i need firmware for nokia TA-1325 please
[14:25:27] What is the problem with the phone?
[14:25:01] 🆗
[14:24:26] Please explain what is the problem
[14:24:03] Found 1 file KG5k
1. Tecno_KG5k_F062_11.0_GL_V034_20220214

[14:21:38] Do not use your smartphone
Use your PC
[14:08:38] \"Factory mode samsung off\" in google )))
[13:55:08] Hello brothers, what might be the problem and solution to this error?
[13:52:07] Vivo Y21s frp pls
[13:36:31] how to fix when i sign in to my dongle account Your device is not secure. Use your Desktop PC on my cm2 dongle
[13:31:49] Anyway to enable Tecno KF7j brom?
[13:19:31] Operation : Identify Device [ v2.35 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : S
[13:18:57] Operation : Identify Device [ v2.35 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : S
[13:14:04] #CM2MT2 connection issue solution is HERE
[13:14:04] Operation : Identify Device [ v2.35 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : S
[12:58:48] Hey I have Nokia 105 ta-1385 but drivers says unknown, what drivers can I use
[12:48:28] Try here @FlashFileSearchBot
[12:48:28] in between active support period you can update your card if available any and can use latest updates
file download from IOS with active support period is 20 files per day

once support period expired you cannot use update if card firmware need to be update
file download from IOS with inactive support period is 1 file per day
[12:44:38] #admin
[12:42:54] Tag infinity admin... U can also mail to them
[12:39:17] what the means of sapport from the time i start to please
[12:36:09] sapport plz help me on this
[12:35:51] help
[12:34:58] help plz
[12:27:06] Not possible
[12:25:49] Hey I have Nokia 105 ta-1380 but drivers says unknown, what drivers can I use
[12:13:50] And frp can be bypassed watch some vid
[12:13:06] Do isp
[12:06:20] Thank you very much
[12:06:07] Finince lock kg5 done by cm2 dongle🔥🔥🔥🔥💪💪
[12:03:38] I need help which infinity box do I use to pass this FRP
[12:03:18] By ios credits
[12:03:15] but u can renew existing tools
[12:03:05] in Infinity
[12:02:56] No you cannot activate such
[12:02:08] Is it possible for me to activate it on my CM2 dongle?
[11:58:15] Found 1 file KG5K
1. Tecno_KG5k_F062_11.0_GL_V034_20220214

[11:57:31] you can check here what sw you can activate in Infinity box/dongles
[11:57:17] https://infinity-box.com/price/
[11:55:36] Like UMT pro
[11:52:06] KG5k-F062-11.0-GL-V032-20211230
[11:52:01] Please can someone please help me with this link
[11:41:40] Guyz I need solution on Nokia c20 m kopa
[11:35:29] what software?
[11:31:35] Please can I activate another software on my CM2 dongle
[11:14:33] but i have been using this account user name and password for some time it done this today?
[11:00:06] how to fix when i sign in to my dongle account Your device is not secure. Use your Desktop PC
[10:54:33] Quelqu\'un peut m\'aider avec ça ? Tecno kc2j
[10:50:50] i lost my dongle and it have new activation plz your help
[10:50:16] sapport plz i need your help am going crazy now
[10:47:33] Reset password or e-mail HERE\r
\r
Apply username and password this way
[10:47:33] Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : S661-F6318_A509W
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
Server Error : Access denied: {\"Message\":\"Access denied 00A3
[10:47:28] please team
[10:47:25] support help
[10:46:02] i have remain with best dongle if i want to transfer my activation on it and block on other side
[10:43:59] Make reports to infinity support team they will ask you username and blocks the dongle to stop misuses then you must to buy new dongle and support team they will transfer all credits/activation to your new dongle
[10:43:35] any help plz
[10:42:13] i have left with only best dongle
[10:41:18] Any one should help
[10:40:48] help plz
[10:39:01] and it have new activation
[10:38:39] any help plz a lost my dongle i think someone stole from what can i do
[10:34:29] Thank you, followed your instructions, and repeated operation and done the job, but the last time i changed from flash mode to diag mode then unlocked.

My username: 00316E3B2C
[10:22:15] Vivo - Y30 Dead After Unlock - Unlock tool
Cm2 Team Help me
[10:21:28] Hi
[10:15:06] xvision xl10 700g firmware is uploading
[10:02:19] Already, and sent to my email but nothing
[10:02:13] Should we reset password
[10:00:14] I am dealing with this problem niw
[09:51:36] Wat wrong
[09:51:36] Same issue just stop ...asking for user and password
[09:51:24] Reset password or e-mail HERE\r
\r
Apply username and password this way
[09:51:24] Device Connected!
BootVersion : SPRD3
Boot : PAC : P661W-F3120-11.0-OP-V033-20220224.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
Server Error : Access denied: {\"Message\":\"Acce
[09:51:23] Reset password or e-mail HERE\r
\r
Apply username and password this way
[09:51:23] Prepare target ...
Prepare Ok!

CODE : pike2_cm4.bin
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:00:25

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : P661W-F3120-11.0-OP-V033-20220224.pac
Sending In
[09:51:23] #CM2SP2 connection issue solution is HERE
[09:51:23] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : P661W-F3120-11.0-OP-V033-20220224.pac
Sending Init Boot ...
>>> ERROR : FDL Start Failed!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Fo
[09:51:23] Reset password or e-mail HERE\r
\r
Apply username and password this way
[09:51:23] >>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : P661W-F3120-11.0-OP-V033-20220224.pac
Send
[09:51:23] #CM2SP2 connection issue solution is HERE
[09:51:23] Device Connected!
BootVersion : SPRD3
Boot : PAC : P661W-F3120-11.0-OP-V033-20220224.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control tra
[09:51:22] #CM2SP2 connection issue solution is HERE
[09:51:22] Device Connected!
BootVersion : SPRD3
Boot : PAC : P661W-F3120-11.0-OP-V033-20220224.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control tra
[09:51:21] #CM2SP2 connection issue solution is HERE
[09:51:21] >>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : P661W-F3120-11.0-OP-V033-20220224.pac
Send
[09:51:21] #CM2SP2 connection issue solution is HERE
[09:51:21] Device Connected!
BootVersion : SPRD3
Boot : PAC : P661W-F3120-11.0-OP-V033-20220224.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control tra
[09:51:20] Wait for device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
>>> ERROR : BOOT ACK not received!

[09:51:20] #CM2SP2 connection issue solution is HERE
[09:51:20] Device Connected!
BootVersion : SPRD3
Boot : PAC : P661W-F3120-11.0-OP-V033-20220224.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control tra
[09:51:20] Card found : E8B82B0D , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Open : P661W-F3120-11.0-OP-V033-20220224.pac
VER : BP_R1.0.0
LEN : 3.36 GiB
CPU : P661W
VER : P661W-F3120-11.0-OP-V033-20220224_1802

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : P661W
Product Model : itel P661W
Product Name : P661W
Patch Level : RP1A.201005.001
Display ID : P661W-F3120-11.0-OP-V033-20220224
Ver. Incmt : OP-V033-20220224
Ver
[09:49:01] Incompatible firmware
[09:47:59] hello everyone
i need firmware for nokia TA-1325 please
[09:45:59] Pls where can I join nck box telegram group pls
[09:35:34] mere me bhi yahi msg aa raha date k sath
[09:35:22] renew karna padega shayad
[09:31:15] i have beeen using it all along
[09:30:12] none work for me
[09:29:58] password changed same problem,Even for lower versions dont work.The admin had said you will use previous versions before expiry date to infinity.please help me
[09:28:45] Reset password or e-mail HERE\r
\r
Apply username and password this way
[09:28:45] Card found : 285613DF , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

VER : BP_R1.0.0
LEN : 9FC59F3B ( 2.50 GiB )
CPU : sp9832e_1h10
VER : A507LS-SU335-11-KE-SF-LC-V007-20210907

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : A507LS-SU335-11-KE-SF-LC-V007-202
[09:22:31] Pls i need Vinko C5 pac file help me
[09:13:05] Do u av higher version itel p38 pls
[09:12:36] Ok
[09:12:25] Change file
[09:07:17] ??
[09:07:16] Admin wat wrong here
[09:06:38] Card found : E8B82B0D , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Open : P661W-F3120-11.0-OP-V033-20220224.pac
VER : BP_R1.0.0
LEN : 3.36 GiB
CPU : P661W
VER : P661W-F3120-11.0-OP-V033-20220224_1802

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : P661W
Product Model : itel P661W
Product Name : P661W
Patch Level : RP1A.201005.001
Display ID : P661W-F3120-11.0-OP-V033-20220224
Ver. Incmt : OP-V033-20220224
Ver
[09:03:56] Yes
[09:02:32] Does infinity allow sharing on another PC ?
[08:56:23] Tecno KG5k trying to read file showing initialize device first.. But I have initialize the device. Am even connected online please what the solution.
[08:51:34] hello everyone
i need firmware for nokia TA-1325 please
[08:50:44] Reset password or e-mail HERE\r
\r
Apply username and password this way
[08:50:44] Card found : 285613DF , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!

VER : BP_R1.0.0
LEN : 9FC59F3B ( 2.50 GiB )
CPU : sp9832e_1h10
VER : A507LS-SU335-11-KE-SF-LC-V007-20210907

Operation : Identify [ v2.13 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : A507LS-SU335-11-KE-SF-LC-V007-202
[08:48:18] Wit d phone
[08:48:14] What was d initial problem
[08:41:17] Please help me what could be the problem
[08:40:38] 🙏 help me
[08:38:37] Hello CM2 please help me out how do I fix this
[08:38:16] help
[08:38:14] Reset password or e-mail HERE\r
\r
Apply username and password this way
[08:38:13] Card found : 285613DF , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

VER : BP_R1.0.0
LEN : 9FC59F3B ( 2.50 GiB )
CPU : sp9832e_1h10
VER : A507LS-SU335-11-KE-SF-LC-V007-20210907

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : A507LS-SU335-11-KE-SF-LC-V007-202
[08:35:28] Write nvram
[08:34:32] kg5j mt6761 android 11
[08:34:13] can you update da file for spark 8c we tired 😩😴
[08:33:56] hello cm2
[08:33:35] Please can someone help me out
[08:32:22] So what will I do to fix it
[08:32:02] Hw report
[08:31:26] Please sir what could be the solution I need serious help please I\'m trying to flash kg5k tecno
[08:25:53] hello everyone
i need firmware for nokia TA-1325 please
[08:24:39] 9
[08:21:16] Loock at https://user.infinity-box.com unlock status. If compleat -repeat operation. And post your username here.
[08:18:29] Operation : SP Unlock [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x
[08:18:29] Please help, my 10 credits gone but Sp unlock operation not done on Neon Ray
[08:15:20] Found 3 files Infinix x6511b
1. Infinix_X6511B_F6318_11.0_OP_V026_20211027
2. Infinix_X6511B_F6318_11.0_OP_V022_20210926
3. DA_SPD_USC_Infinix_Infinix_X6511B.fdl

[08:10:33] Infinix x6511b
[08:10:19] Please send me link make download the firmware
[07:59:27] Is stuck here again
[07:58:35] Okay
[07:58:05] read the marked text
[07:49:59] Please admin help me
[07:48:25] Please help
[07:47:47] Use serch in this group..
[07:46:05] Please help is stuck here?
[07:42:59] Admin please help me out
[07:39:47] Is infinix x665b supported in cm2?which boot should I use
[07:09:02] Somebody should put me tru.....how to identify infinix x665 on cm2
[07:08:13] 🙄
[07:06:56] Need x665b da file
[06:32:47] Already done.
[05:59:33] https://youtube.com/shorts/04tSU6xrbf0?feature=share

Top 4 iOS 16 FEATURES. Best update.
[05:51:32] Hot 12i Da file pls

InfinityBoxTalks 2022-09-18

[22:28:40] And run and select turn UK edition off and enjoy
[22:27:59] Download the cm2 dongle manager
[22:15:03] Cm2 sp2 Imel section not showing on the security , solution please q
[22:03:11] How to solve dis pls
[21:30:11] 🙄
[21:30:08] Any help
[21:29:29] Wen am doing full flash dis were it stock and stop
[21:27:38] Pls put tru
[20:59:56] Did you also check forced nvram?
[20:46:00] Write nv file
[20:33:04] I do
[20:32:03] U are doing it well
[20:26:57] D phone is not receiving new file sef it wen blank but connecting to laptop
[20:20:08] Update nvram during flash
[20:19:44] Please can I activate other box on my dongle?
[20:19:35] Itel P651W no service after flashing please
[20:19:06] Good day sir
[20:03:41] Model AE 9010
[20:03:04] Found 6 files benco
1. Benco_SP9832E_benco_AF9010_F_9_BENCO_AF9010_F_1_32_S330_INT_21H04_PPR1.180610.011_AF9010_F
2. Benco_BENCO_AF9020_2_16_S319_INT_20L04_090957_266
3. Benco_BENCO_AH9910_1_16_S235_INT_21H04
4. Benco_SP9863A_11_benc
[20:02:20] Try here @FlashFileSearchBot
[20:02:20] Any one have file
[19:52:48] Itel P651W no service after flashing please
[19:52:03] P651w no service after flashing solution please
[19:17:28] Use aftersaletool
[19:11:35] Tecno spark8 faild to enter meta mode
[18:46:11] Pack boot v. 11 spd
[18:27:54] I have inbox
[18:23:04] Try to use a search in this group)). This trouble many times was asked
[18:19:12] Admin plz assist , i cannot use my dongle👆
[17:50:01] Hard reset not working
[17:49:49] Nokia 2720 flip
[17:39:29] Done this ?
[16:56:11] how to install firmware on cm2 note 8 pro ?
[16:50:17] Elloooo any body I need dis pls
[16:49:23] Vivo y1s can\'t identify
[16:34:19] Pls
[16:34:16] Pld
[16:34:14] I need dis also
[14:05:36] cm2 waiting for nokia c10,c20,c30 diag mode closed for factory data reset please or evin on infinty best and nokia c1 second edition ta1380
[13:53:39] Do what is asked to do
[13:52:31] ?
[13:51:13] Please I want to open my infinity ♾ today am buy
[13:47:28] Am buy infinity cm2 today I want to update
[13:43:16] سلام دوستان
ارور انلاک بوتلودر a10s
چجوری با eft حل کنم
[13:27:45] this is infinity support group
[13:27:26] write in support of this program.
[13:22:46] Samsung A03s. Any solution to this?
[12:54:06] Infinity cm2 ♾ please solved me this issu i need registration
[12:53:39] To renew your license, service available
[12:47:22] How do i go about this plz🙏
[11:43:48] How to register cm2
[11:42:30] How to Solution FDL fail Tecno BD4 cm2 sp2
[11:39:40] How to Solution
[11:37:25] FDL fail
[11:36:43] How to remove frp Tecno BD4 SPD CM2
[11:20:19] Helo People i need firmware for Hisense u50
[11:16:17] Found 13 files hisense
1. recent_10_Hisense_E30_Lite_S01_06_HG
2. HMobile_Hisense_F22_MT6737M_7_0_alps_mp_n0_mp1_V1_0_2_hs6737m_35_n_P1_2018_03_22_17_21_stock
3. Hisense_MT6589_Hisense_HS_U970_u970e_6_4.2.1_ALPS.JB2.MP.V1.2
4. Hisens
[11:16:09] Nothing found for U965

If you will get the file upload it to support with iosFileUploader

[11:15:59] Nothing found for U956

If you will get the file upload it to support with iosFileUploader

[11:14:57] how
[11:12:23] Is not accepting file.....
[11:12:03] Itel p38
[11:11:14] Yes sir
[11:00:24] hello, who can help me with this redmi 11t 5g is mtk and I can\'t pass global firmware without getting NV data is Corrupte at the end...they will have some global firmware that is compatible
[10:59:49] Yes
[10:55:09] Hi please how to unlock Alcatel 5007U?
[10:37:56] yes Sir
[10:37:25] Did you have the file
[10:34:21] Maybe you have denied inbox massage. Maybe block
[10:29:15] full flash with sign file
[10:28:15] full flash
[10:28:15] Yes
[10:27:57] What operation do u want
[10:27:13] Massage not delivered in you dm
[10:22:28] Dm
[10:18:47] Infinix HOT 12i X665 Cm2 da file not connecting it, plz Brothers help me with solution
[09:49:11] Found 15 files be7
1. RM_1019_02060.00000.15053.24003_059W353_5BE78278_RM1019_02060.00000.15053.24003_RETAIL_prod_signed_10022_01D487_000_PT.ffu
2. RM_1019_01068.00023.14295.43001_059W451_A76A1AEB_RM1019_01068.00023.14295.43001_RETAIL_prod_signed_1019_00BE7F_000_PH.ffu
3. RM_1012_10.01.11_059V8P1_A
[09:48:55] Tecno KA7 Nv File | Halab Tech Support
https://support.halabtech.com/index.php?a=downloads&b=folder&id=116949
[09:19:02] Can you help me please, my customer is waiting fir the service.
[09:15:14] Install boot pack and check
[09:10:35] I need help with latest hisense loader like e50 lite
[09:05:05] I need easy Jtag plus for sale
[08:54:15] Good Ufi box with complete setup for sale. Location is Nigeria
[08:50:26] Are u trying to flash
[08:50:19] Wat file
[08:19:32] How long
[08:18:38] Dis is d error am seeing
[08:18:24] Trying to load new file
[08:17:59] Morning
[08:16:47] how can i do this?
[08:16:06] You can use previous software versions unlimited.
If you want to use newly released software updates you should renew support.
You can do it anytime later. Old exe will work anyway.
[08:15:10] Activation #0: Infinity-Box/Dongle [CM2]; S/N: 4B******; Firmware Version: 0153; Registered: 17-Sep-2021; Expired: 18-Sep-2022; Support: Active.

does this mean i should register today?
[08:15:07] Hi,
Saturday
Wait
[08:05:45] Hi infinity cm2, i bought ios credits but from gsmserver but nothing on my ios account.
My user name is 00316E3B2C
[07:39:54] Check this https://infinity-box.com/?r=100196
[07:37:47] Yes stuck on boot logo
[07:00:51] Nothing found for itel p38

If you will get the file upload it to support with iosFileUploader

[07:00:42] reboot PC
select anothe loader
[06:57:03] 😒😔
[06:51:37] nokia 2.4 (TA1270) NOT detected even by test poin by cm2.any fix?
[06:46:11] 🙄
[06:46:08] Anybody pls
[06:45:59] Morning house I think I need d itel p38 firmware
[06:42:06] What could be the solution of this
[05:19:47] Nokia g10 not detected even by test point
[03:08:51] @Juliana_Braxton

https://t.me/+1G_laEKmqDo1MDA0
[02:58:58] Need renewal sir
[01:22:59] help from samsung galaxy a035f frp

InfinityBoxTalks 2022-09-17

[22:47:28] samsung a10s nvram help
[21:34:22] select another model/loader
[21:34:04] D phone issues is restart wen setting it up
[21:33:37] Error
[21:23:13] Found 2 files P651W
1. iTel_P651W_F3116_10.0_OP_V032_20210816
2. iTel_P651W_F3116_10.0_OP_V033_20210906

[21:10:29] Let me try dat
[21:10:15] Boss
[21:10:12] Ok
[21:02:50] A260f SE or U14 auto patch firmware
[21:00:31] Try it in diag mode
[20:51:24] Thanks man .....let try it
[20:23:24] Free
[20:23:18] Yes
[20:05:37] nokia 2.4 (TA1270) NOT detected even by test poin by cm2.any fix?
[19:58:10] Do full flashing it will work
[19:57:59] Download it from infinity support
[19:55:54] Use that
[19:55:41] itel p36 Nvram.rar
[19:54:44] remove mdm with root and no root completely free of charge✌️. https://ugafix.com/smbypasss-tool-v1-4-0/
[19:52:58] 😞
[19:52:55] 😒
[19:52:51] Itel p38 vnram
[19:52:40] Pls house
[19:45:15] Nokia c20 new update is supported?
[18:43:43] Nothing found for tecno kg5p

If you will get the file upload it to support with iosFileUploader

[18:43:29] What is the firmware version?
[18:41:58] Hello,
Send e-mail message to help@infinity-box.com
[18:40:54] server authentication tasks need renewed support
[18:28:36] Have but paid
[18:26:42] Thanks I will tried it on Monday
[18:11:17] What I mean is that the bin file I download from iOS, the exe said Bad file
[17:55:48] hello, a friend had his box stolen, he wants to report his infinty box, here can you help me with that?
[17:26:57] Hello family need help to unlock Alcatel 5033F by CM2.
[17:14:34] Did you tried different usb cable? If yes, try to clean the usb connector or disassemble the phone and then resolder all connector ways.

If not successful, then you need to use a testpoint jumper to help your phone to be detectable with pc.
[17:11:41] Flash wit cm2 or miracle
[17:11:31] File
[17:11:28] Bin
[17:11:26] That\'s d file bro
[17:11:15] Itel it2160 MT6261_S0001 indian ver read me.zip
[17:08:58] Am coming
[17:08:48] Yes
[17:08:32] Right
[17:08:29] Phone
[17:08:25] Is it mtk
[17:07:51] Can you send it here please
[17:07:15] It\'s mtk
[16:50:57] Inbox to send 2 u
[16:50:41] I have a bin file
[16:37:36] Before the problem happen, do you think the phone is mtk or spd? Original itel 2160 is mtk and fake is spd or rda.
[16:08:02] Is it from server or my dongle need to be renewed?
[16:07:59] Found 2 files Huawei y5 2018
1. Huawei_Honor_NVM_Y5_2018_DRA_L21_NVRAM_MT6739_eMMC.mt_sec
2. Huawei_Honor_Huawei_Y5_2018_DRA_DUA_Dura_L22_1.0.0.108_C461_Android8.1.0_Am_Uz_Tj_Mongolia_Ge_By_Kz_Kyrgyzstan

[16:07:18] Nothing found for s dra-lx5 1.0.0.150(185)

If you will get the file upload it to support with iosFileUploader

[16:06:39] Not compatible beo
[16:04:05] I download the file, but the mtk
[16:01:15] Yes.
[16:01:04] ?
[16:00:41] Flash bin file?
[15:53:03] Server calculation need active support
[15:48:05] Way it says support expired it was working before like 1 week ago and my dongle is 2021 but it was working before 2 weeks ago?
[15:42:17] Preloader off after flash or?
[15:41:57] Use file.
[15:22:33] smart reset
[14:21:03] Can anyone help itel 2160 preloader off, what can I do to make the phone power
[14:09:26] Admin pls
[14:06:42] Itel 2160 preloader off, what can I do to boot the phone
[13:32:26] Who can help me with X690B NVRAM file
[13:16:50] Infinix smart 3plus device hang on logo
[13:16:16] What error is this and any help? Pleas
[13:13:18] Chimera tool pro 107$
Chimera tool Samsung 63$
Dft pro 1 year activation 52$
Gsd pro 1 year activation 41$
E-GSM 1 year activation 44$
TR tool 1 year activation 40$
Cm2 1 year activation 31$
Cm2 2 years activation 44$
Eft pro dongle renew 1 year 17$
Eft pro dongle renew 2 years 27$
Umt 1 year activation 18$
Z3x + octopus + samkey + ......
Credits available ✅
Ufed + oxygen + md next
Latest version available ✅

For old customer: pay after done ✅

Contact me @Gsm_1unlock
[12:25:39] How to fix this tecno pop 5 Pro Bluetooth problem
[12:04:28] Itel p551w reset file pls
[12:03:28] can t not flash back
[12:03:21] can read full
[12:03:15] wiko y82
[12:00:22] Pls I need dis
[12:00:17] I need itel p38 vnram and firmware
[11:58:00] Hello, pls I need tecno spark 9 kg5p firmware.
[11:23:34] Any one hv firmware
[11:19:57] send sw log text https://infinity-box.com/?r=100199
[11:19:32] Help After Unlock this Mobile Movitel M9111, Still restart evertime... Solution Please
CPU is sc9832e...

This Mobile and M8425 after unlock Restart evertime
[11:18:00] https://infinity-box.com/?r=100198
[11:17:15] Nothing found for benco AE9010

If you will get the file upload it to support with iosFileUploader

[10:58:49] Nothing found for vivo y67

If you will get the file upload it to support with iosFileUploader

[10:57:53] Found 23 files y67, search limit is 20 files per server
1. Mobiola_MT6737M_Mobiola_MS50L1_MS50L1_7.0_alps_mp_n0.mp1_V1.0.2_esky6737m.35.n
2. Dialog_Dialog_Blaze_M50E_1A_7.0_alps_mp_n0.mp1_V1.0.2_MT6737M_esky6737m.35.n
3. PcBox_MT6735_PCBOX_Art_PCB_V116_Art_PCB_V116_5.1_ALPS.L1.MP3.V2.3_HUAY6735M.65U.B
[10:40:30] Bro it\'s model different I want AE9010
[10:36:08] Found 1 file benco 9010
1. Benco_SP9832E_benco_AF9010_F_9_BENCO_AF9010_F_1_32_S330_INT_21H04_PPR1.180610.011_AF9010_F

[10:28:07] Any one have this model flash file
[10:18:15] #CM2MT2 connection issue solution is HERE
[10:18:15] Operation : Identify Device [ v2.35 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM20)
MODE : PRELOADER PORT
PORT : 20
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : S
[10:02:45] Samsung J7 prime, i can\'t power off or reset, what can i do please?
[09:44:38] Which version and which method you used
[09:42:26] hello
[09:35:08] I guess your dongle is damaged as a result of sharing.
It can be fixed.
Make this https://infinity-box.com/?r=100155
[09:34:27] ok, got it.
try again now
[09:31:51] What can be the problem
[09:28:08] i was trying to flash itel a661w with format flash, after formatting it got stuck at \'\'preparing target\'\' so i decided to start flashing the files one by one, after getting to the 15th file it started giving me this error
[09:23:34] also latest CM2SP2 version is v2.14 but not v2.12
Install latest version for best results
[09:22:57] select another CPU and Model at top left
[09:21:51] help mi
[09:21:20] so what is admin tecno bd4
[09:01:35] Someone come to my aid please
[08:59:01] I flash it yesterday
[08:57:52] Solution available
[08:57:28] Techno CG7 phone locked
[08:52:45] Any solution?
[08:36:10] please always check text given by software.
Read the text line at the middl, it says you made a lot of server attempts today.

Do you have many phones to repair on hands?
[08:14:06] Mdm device
[08:01:21] Then connect to internet
[08:00:24] Put in the right ios username and password in the settings tab
[07:56:53] PLEASE I NEED SOLUTION TO THIS ERROR👆
[07:53:50] All drivers on support
[07:50:40] Sir Nokia ta-1385 network lock driver I need sir
[07:50:22] pls has anyone experienced this
[07:50:18] https://infinity-box.com/?r=100193
[07:49:24] it\'s not a driver,
it\'s some kind of method to connect to phone.
[07:39:25] What system app are you talking about
[07:38:38] But it works on version 11
[07:38:16] Only mtk
[07:37:21] Both
[07:36:44] Spd or mtk
[07:36:29] Wi-Fi was on
[07:36:05] Is their any abd tools that can remove system app on version 11 and 12
[07:35:49] Connect wifi
[07:33:48] Pls admin I need fast check exe pls
[06:11:49] Ok bro
[06:10:20] Quacom driver 3.0.8.7
Don\'t display in English for installation, please admin any amendment?
[06:02:57] Frp 2022 adb *#0*#
[06:02:01] Fro 2022 adb
[05:57:17] Spd auth you must login to cm2 [email and password] available on setting tab
[05:52:39] Is it a driver? Spd auth.
[05:11:20] Can unlock by cm2 or best
[05:10:50] NOKIA TA-1279 COUNTRY LOCK
[05:00:24] Please help, how do i switched off samsung J7 prime on locked direction without removing the screen before flashing
[01:28:58] Samsung Galaxy A23F
[01:28:09] Salut ça va bien vous allez vous aidez-moi ça c\'est mon téléphone il y a des comptes Google
[00:28:02] @Juliana_Braxton

https://t.me/+1G_laEKmqDo1MDA0
[00:01:57] https://infinity-box.com/?r=100198

InfinityBoxTalks 2022-09-16

[23:14:45] Update qualcomm
[22:25:23] It\'s on easy buy
[22:20:24] What is the problem with it?
[22:12:41] Tecno kg5j
[21:55:52] what is your problem?
[21:55:03] admins do not check any photos
you can wait somebody else
[21:33:49] 🙏please I need solution sir
[21:32:24] Requesting for pl/pl crypto/swsec da
[21:30:50] Tecno kg5j not working
[21:23:57] try with another base/model selection
[21:23:15] download from Infinity server
[21:21:47] What models do you need?
[21:21:23] Check your model here https://forum.gsmhosting.com/vbb/f296/reset-without-lost-user-data-write-here-success-reports-2997627/

and here https://forum.gsmhosting.com/vbb/f296/oppo-lost-data-after-safe-format-2997569/

post your report to forum
[21:04:02] use default built-in files
What is the result?
[20:52:50] next step is: you will get reply given by Neuron Brain Network or maybe somebody else tell you what to do
But best way is - read that text too
[20:51:20] Your support is expired
Please contact to any seller and renew support
[20:45:01] After the log then please what is the next step
[19:17:52] Download the file and flash the phone
[19:13:48] DA file tecno BD4H, POP 5 RRO
[18:18:02] Please house cm2 can reset password without loss all the data. I mean the lastest version sorry
[18:16:31] You guys should update cm2mtk2 boot pack
[18:10:30] Any help house
[18:03:06] Samsung A02 not bringing wipe on the recovery menu and my CM2 detecting it, any help
OS 11
[17:55:27] DA FILE
[17:55:13] A58 itel FDL
[17:32:09] I don\'t know if it requires any other driver from the one I have...
[17:31:10] So while try to flash it with CM 2 mtk module am getting this error.. If their is any one with solution to this pls put me through.......
[17:28:40] Please guys I have a problem with this Gionee S10 smart phone it\'s showing
[16:33:11] I\'m using CM2MT2.V2.36 BETA TEST sofa so good keep the work going team thank you.
[16:22:38] Nothing found for CardPhone

If you will get the file upload it to support with iosFileUploader

[16:21:40] Found 3 files Elari
1. Elari_Elari_KidPhone_4G_KP_4G_MT6739_8.1.0_KidPhone4G_V1.17
2. Elari_Elari_KidPhone_2_KP_2_ULTRA2503D_11C_PCB01_gprs_MT6261_S00
3. Elari_Elari_KidPhone_2_KP_2_ULTRA2503D_11C_PCB01_gprs_MT6261_S00.K6S_2503D_FOREIGN_RU_V1_4_full

[16:07:46] Not supported
[16:07:23] Samsung A12 kg lock.
Any solutions
[16:05:33] any one help user name password reset but not work
[14:26:39] Your not satisfied with cm2?
[14:22:02] What is the Username?
[13:51:23] Contact your reseller
[13:36:21] I bought Infinity cm2 d\'ongle server credit but I didn\'t see anything
[13:22:32] Make this https://infinity-box.com/?r=100155
[13:05:15] I downloaded cm2mt2 version 2.35 and extract it, since then it\'s doesn\'t open again,it will just show the two circles and went off, any solution please
[12:45:38] Wait
[12:39:52] Found 9 files Ta-1114
1. noname_copy_J106_5_61D_11C_128X160_PCB01_gprs_MT6261_S00_copy_Nokia_106_TA_1114
2. noname_copy_M106_61D_PCB01_gprs_MT6261_S00.M1062_IC_190814_V01_copy_Nokia_106_TA_1114
3. N_106_N_106_TA_1114_here
4. N_106_
[12:39:40] what is the problem with the phone?
[12:39:03] send sw log TEXT from file this way https://infinity-box.com/?r=100199
[12:38:17] Becaue some operations need some kind of server process.
You can ask somebody about SPD Auth
[12:25:52] Admin please
[12:05:56] Operation : Identify Device [ v2.36 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM : MEID : C23C624C283503ECB02D73D2031796BC
BROM : SecLevel : 0x000000E5
BRO
[12:03:49] Hi I need
Nokia 106 Ta-1114 Farsi Firmware
[11:41:40] ok bro
[11:41:29] I know my friend
[11:41:28] It was a joke my friend
[11:41:14] send account for payment 🥺
[11:40:54] Here is Infinity support group, read the group name
[11:40:47] 100$
[11:39:40] I sell solution I am poor
[11:39:28] hi don\'t delete please 🥺
[11:38:13] ++++
[11:37:36] https://youtube.com/shorts/G0bgPk9xTBE?feature=share

ALL SPD Permanent MDM Remove

☕Infinix Hot 10i PR652B
☕Tecno KG5K MDM
☕Tecno Spark 7 MDM

click here contact https://wa.link/7dvwpv

🔰All Tecno SPD MDM File
🔰All itel SPD MDM File
🔰All infinix SPD MDM File
🔰All samsung MDM File
visit
https://www.software-injinia.com/
[11:14:48] cannot restore backup
[11:14:35] Imei lost
[11:06:53] helpme
[11:06:04] tecno bd4 frp
[10:49:28] 😂😂😂😂😂
[10:47:01] next time you will get ban
[10:46:43] As expected

https://infinity-box.com/?r=100196
[10:46:24] Hang on logo
[10:45:49] Chimera tool rent available
[10:12:58] What was the problem with the phone beforee flash?
[10:06:31] Phone can\'t flash
[10:05:03] DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM65)
MODE : PRELOADER PORT
PORT : 65

Boot done

[FL] : HW verification passed

[FL] : Pre-Flash backup
[FL] : Pre-Flash backup passed

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000002E88000
Erase : 0x0000000003688000 : 0x0000000004000000
Erase : 0x0000000008800000 : 0x0000000000A00000
Erase : 0x0000000009500000 : 0x0000000002400000
Eras
[10:05:03] Write : PRELOADER
Update bootloader backup copy...
Update bootloader backup copy Ok
Write : RECOVERY
FAIL : INVALID GPT
ERR : 0xC0030008
ERR : INVALID GPT
ERR : 0x00000000|0x00CE1D2C

Error : Flashing failed
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable now

Chinese Miracle II : MediaTek Service Module
Created by Infinity-Box (c) 2022
Creation time : 2022/09/06
Module version : 2.35
Device Info file : _Android_info.txt

Patch Level :
[10:05:03] S/N: 0CF3A62F v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.35

Load IDBase v723487 Ok!

Update configuration...
Configuration [12060] updated

Load IDBase v723487 Ok!
Preloader [HW DEV] Info :
EMI : DEV : MT6757
EMI : SRC : preloader_rlk6757_66_n.bin
EMI : CNT : 0003
EMI : [00] : eMMC : LP_DDR4X : ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [01] : eMMC : LP_DDR4X : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 6.00 GB
[08:14:16] I already did it. well thank you
[08:11:07] Ok give me anydesk id cause you don\'t understand me
[08:09:18] Found 1 file a661w
1. DA_SPD_USC_iTel_iTel_A58_A661W.fdl

[08:09:06] Okay
[08:08:12] 1.07
[08:08:07] Nokia loger not
[08:07:59] Software 1.30 OK
[08:05:33] And you must have internet connection
[08:03:56] Check my login details and yours
[08:03:09] Sir i mean on Nokia sl3 logget
[08:01:58] https://dl3.infinity-box.com/00/pub/?dir=software/other/&uid=19251&file=iosJobUploader.7z software ready OK
[08:01:30] One device cost 30 credits
[08:00:57] Fill login and password of your infinty credits make sure you have 30 credits
[07:57:32] Http 404 not found
[07:54:24] ...nk-sl3-logger
[07:53:32] https://dl3.infinity-box.com/00/pub/?dir=software/other/
[07:52:41] Pleas send software download
[07:51:47] Use this after order completed check unlock by Infinity Best
[07:51:38] Infinity file Uploader 1.17 ?
[07:50:12] Yes
[07:48:59] 16/09/2022: 09:48:00: Operation: Check Account
16/09/2022: 09:48:00: Connecting to server...
16/09/2022: 09:48:03: Server reported error: Socket Error # 11001
Host not found.
16/09/2022: 09:48:03: Operation terminated
[07:48:50] Software infinity Online Service SL3 Job Uploader not conect server
[07:44:33] Logger best software?
[07:43:20] You must enter user name and password with 30credits or more

One device cost 30 credits
[07:41:04] Use Nokia SL3 Logger and follow steps
[07:39:14] Please house cm2 can reset password without loss all the data. I mean the lastest version sorry
[07:38:23] enter name + pass Connecting to server...

Error with message : HTTP/1.1 500 Access denied ` auth
[07:37:35] And you must have 30crdt
[07:36:09] No, on but it take more than 6 hours
[07:27:57] SL3 calculation server OFF?
[07:00:40] I get it
[07:00:34] Qualcomm MSM8905 Snapdragon 205 (28 nm)
CPU Dual-core
[07:00:24] Ok
[06:59:31] I dont know sorry
[06:57:51] Chip type?
[06:57:21] Hard reset not working
[06:56:54] Nokia 2720 flip security code
[06:56:20] Hi all
[06:12:53] Then go to services and do whatever you want
[06:12:29] No needing to load DA, just go to tecno-Raphael V and identified device then unplug phone from USB stick
[05:35:47] Admin please
[05:20:38] Please why is it that I need to connect to server before I can work on sps2, mostly on these new android?
[03:00:29] @Juliana_Braxton

https://t.me/+1G_laEKmqDo1MDA0
[02:44:05] Found 4 files s driver
1. Micromax_data_card_drivers_MMX200G_Data_Card_Driver
2. Micromax_data_card_drivers_MMX300G_Data_Card_Driver
3. Olive_V_MW310_windows_8.1_sw_and_drivers
4. Lemon_Lemon_DUO339S_SOFT_VER_V1_6_for_new_display_dri
[02:21:24] I need da for tecno kg5j or and boot which can support for flashing on cm2 mt2

InfinityBoxTalks 2022-09-15

[21:05:51] UF or SF
[21:04:34] It should be UF
[20:59:33] You will start from number to letters .
[20:50:37] https://www.gsmfirmware.net/2020/09/find-correct-firmware-for-samsung.html
[20:02:30] Come
[19:24:45] i need help techs.... how do see if Samsung firmware is in binary 15 before downloading
[18:56:15] I Dont Have Orginal Nvram
[18:46:50] nvram is needed
[18:40:31] Cm2 dont fix
[18:23:15] Hi

Cm2 Say Nvram Damaged

Note 9 (Merlin)

how To Fix It ?
[16:44:47] 🧑‍💻
[16:25:45] Not working with the latest security
[15:43:29] https://www.google.com/search?q=0x0c000007b
[14:54:43] Hi
[14:50:31] Hello
[14:44:03] send sw log text
and try different loaders one by one
[14:43:21] Friend, just install boot-pack and try
But I suggest you always use default loaders (as per CPU base) first
[14:31:35] What is the problem with the phone?
Is is stuck on boot logo?
[14:31:12] What is the error message text?
[14:29:58] Cm2 smart card error
[13:51:58] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VO
[13:07:56] Tick on port... Use brom only to identify
[12:18:51] Found 3 files itel s13
1. iTel_S13_F8012_8.1_OP_V030_20200713
2. iTel_S13_F8012_8.1_OP_V011_20180823_O11019_S13
3. iTel_S13Pro_F8012_8.1_OP_V024_20190717

[12:17:43] Admin, is KF7j now supported with the new boot pack?
[11:47:50] thank you
[11:47:32] in preloader mode
[11:47:25] such CPU atm not supported
[11:47:04] vivo v23pro pre loader flashing possible?
[11:38:05] Tecno---Rapheal V2, try this
[11:32:25] Brom boot not working so what\'s the correct loader
[11:31:42] What\'s the correct loader sir?
[11:31:08] Select correct loader sir
[11:30:34] Not yet supported sir
[11:29:33] Logs?
[11:25:55] Thank you very much.
[11:15:04] #CM2MT2 connection issue solution is HERE
[11:15:04] S/N: 98F3AC46 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.35

Load IDBase v312457 Ok!

Can not get data from server
Username or Password is wrong, set it at Settings tab
How to configure server access https://infinity-box.com/?r=100166

Load IDBase v312457 Ok!
Operation : Identify Device [ v2.35 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM_V1632 (
[11:10:29] What is the problem with the phone?
[11:04:57] tecno BD4
[11:04:44] NVMng : Failed to update NV!
ERROR : 0000008E:80000000FF7F7E00
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!

>>> Error : Flashing failed!
>>> Check previous message for more info!
[11:01:27] LOG TEXT!
[10:51:59] Cm2 can\'t flash this phone that\'s on latest security
[10:25:05] Tecno KG5K
[10:24:11] Model and cpu
[10:23:25] Admnn please does Cm2sp2 support bootloader unlock?
[09:51:00] connect phone to PC and ake Identify
send sw log text
[09:50:33] Ok
[09:49:58] here https://infinity-box.com/service/
[09:49:44] read this https://infinity-box.com/service/
[09:49:25] I don\'t see anything at your nice photo
give me text
[09:42:39] Have you fixed it ?
[09:37:34] https://infinity-box.com/?r=100196
[09:37:11] yes
[09:36:51] Found 1 file Inoi 107B
1. Inoi_INOI_107B_BXHL_X79_LZD_LZ02_220X176_PCB01_gprs_MT6261_S00

[09:35:24] is it stuck on boot logo?
[09:35:03] send sw log text
[09:34:53] Card found : S/N : 82154220 , v0153
Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6580 , Project : rlk6580_we_c_m , Storage : EMMC
Files found : 9 , Set to Flash : 8
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Hisense
Device Model : HS6580MT
Device CPU : MT6580
Device IntName : U989
Device Version : 6.0
Device Compile : 5/19/2017 11:03:51 AM
Device Project : alps-mp-m0.mp1-V2.34_rlk6580.we.c.m
Device ExtInfo : Hisense U989
Ready to Flash!

Operati
[09:34:40] Ok
[09:34:18] Make this https://infinity-box.com/?r=100155
[09:17:50] Hello team
[09:17:41] thanks
[09:17:32] ok
[09:12:39] Then repair security may help
[09:12:31] Find factory firmware update with nvm
[09:12:06] Any help here??????????????????????????
[09:06:04] use memory tool
[09:04:57] Module MTK
[09:04:19] Good morning, how to make WRITE RPMB with CM2 DONGLE
[08:56:56] Too bad
[08:56:43] Not working
[08:56:23] stil waiting for infinity best update long time
[08:55:47] format it Via meta mode then flash
[08:55:26] They have block the brom boot
[08:54:39] 🔥🔥🔥 *_NEW NEW NEW_* 🔥🔥🔥 NOKIA TA 1418 A.K.A NOKIA G21 MDM/FINANCE LOCK REMOVED ANTIRELOCK BY MR.Robot 😎👌🏽
[08:54:16] why
[08:53:49] I can’t flash Tecno kg5j Mtk with the latest security
[08:47:49] https://infinity-box.com/?r=100193
[08:42:07] here https://infinity-box.com/?r=23
[08:40:49] #CM2MT2 connection issue solution is HERE
[08:40:49] Operation : Identify Device [ v2.35 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+
[08:40:47] Also if not work install the boot pack from the support area select infinix/tecno/itel models
[08:40:44] In progress
[08:40:24] thanks. the fone does not jump ro brom
[08:39:02] beta/test software versions https://infinity-box.com/?r=100202
[08:38:38] 2.36 exe?
[08:29:33] Okay
[08:28:25] Use 2.36 load factory firmware and try to identify
Also if not work install the boot pack from the support area select infinix/tecno/itel models
[08:27:24] Not supported if diag closed
[08:27:12] Not supported if diag closed
[08:27:12] Tecno bd4h jumping to brom solution?
[08:25:12] c20 network lock
[08:22:13] BACKUP i did
[08:19:54] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : HiSense : HLTE232E_E50
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash
[08:19:48] Help remove PayJoy Hisense E50 HLTE232E
[07:29:02] I need help where can i get flash files like infinix tecno and itel phones
[07:22:08] https://youtu.be/HARK6S3YLno
[06:32:17] help
[06:31:53] Help with Samsung S10+ G975F u15 android 10 firmware download link
[06:31:14] Inoi 107B Firmware
[06:31:05] What is solution?
[06:30:17] Use it by dongle manager but fail
[06:29:25] X6511b require user and pass
[06:22:30] help cm2 suppord
[06:05:05] Infinity DongleManager v1.91 plz give me files
[05:51:22] Cool
[05:40:52] Yes thanks
[01:14:09] good night, help fellow, I have a plum E500 that lost band 850 only works with band 1800 and 1900 some solution to recover band 850
[00:41:24] Yes sir, and service available 👌💯✅

InfinityBoxTalks 2022-09-14

[23:18:44] Ok
[22:31:04] Red info for cm2 mtk : tecno k8
Red info for cm2 mtk2 : 0ppo r829t
[22:29:12] Oppo r829t mtk6582 hang on logo

I do format flash for anoder backup file for same phone but problem not solve help me
[21:51:54] When going to update spd infinity team
[21:33:47] Team is it possible for you to look for RPMB files of different mobile phones and add them to our great tool for KG,LOCKS, PAYJOY, FINANCE LOCK ETC?
[20:58:24] 1C6MUPM0
[20:39:51] Up
[20:32:17] 📲En esta ocacion les traigo la manera de reparar imei al Nokia 2.3 / TA1214 con Infinity box o dongle, en su modulo MTK.

Abrimos CM2MT2, configuramos todo como en la imagen 1 , luego vamos a la pestaña Security, configuramos como en la imagen 2, escribimos el imei y le daremos en Repair Security. Luego deben conectar el movil apagado en modo brom, presionando ambas teclas de volumen para que lo detecte, solo resta esperar unos segundos a que termine el trabajo y listo 🔓️ . Espero que les sirva co
[19:27:42] https://infinity-box.com/?r=100196
[19:14:42] firmware version string is very loooooong but not only \"10\"
[19:14:01] try the same reset once again
and you can try with latest beta version https://infinity-box.com/?r=100202
[19:12:12] send sw log text
[18:59:55] The version is 10 it is possible?
[18:27:00] phone formatted but data still in phone
[18:26:38] infinix x624 format log
[18:16:36] Why does cm2 mt2 keeps hanging after boot done
[18:02:49] send sw log text https://infinity-box.com/?r=100199
[18:02:33] It\'s not banned
[17:57:48] Version 10
[17:45:56] Infinix x624b format but nothing gone all still be in phone
[17:41:50] ok sir. but please release my telegram username @Kidumbah its seem banned
[17:36:22] Reset password or e-mail HERE\r
\r
Apply username and password this way
[17:36:22] Yes, correct

Error message text was:
Server Error : Access denied: {\"Message\":\"Access denied 00001087BC;Wrong username or password;Product 908 declined;Subscription expired 2021-08-18 please renew it\"}
[17:35:48] all is ok?
[17:35:41] So after renew this error will not appear again?
[17:35:02] What is the firmware version?
[17:33:14] Subscription expired 2021-08-18 please renew it
[17:32:47] Type: Infinity-Box/Dongle [CM2]
S/N: 001087BC
Username: 00001087BC
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0150; Expired: 18-Aug-2021

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period
[17:26:52] Password already reseted but still same
[17:26:38] ??
[17:26:27] Unlock
[17:26:21] Alcatel 9032z
[17:23:50] Password already reseted
[17:23:29] I tried these with kg7H and the boot done
[17:22:48] Reset password or e-mail HERE\r
\r
Apply username and password this way
[17:22:48] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : PR652B
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH F
[16:36:16] thank admin
[16:34:51] thanks kg7h done
[16:31:38] Stuck at this point when charger connected
[16:28:23] Can someone tell the chipset of Sowhat Camon 11. This device is Spd but which number is this spd?
[15:52:16] No restore option
[15:51:57] Samsung a03 frp new security
[15:48:23] where is sw log text?
[15:47:23] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[15:42:09] Bootrom needed, not a preloader. Use 0-base 2xxx base. And local sla checkboks
[15:41:34] Use the built-in loader
[15:39:03] Tecno kg7H da file pls
[15:31:47] These is SW log
[15:31:15] Admin pls
[15:26:21] @Trillioncoin2
[15:13:15] Admin what is the solution I need the Da I Ve tried all the built-in loader it\'s not work
[15:01:41] Hello Admin
[14:56:28] Any solution on this...
Someone should please help....
[14:49:51] I have flash it still and still the same
[14:38:14] Flash factory firmware
[14:36:01] Vivo y73 v2059 frp cm2 support?
[14:34:54] Any solution on this...
Someone should please help....
[14:26:30] Use PC my friend
[14:26:09] Bo\'s I\'m using phone to browse
[14:14:42] send sw log text https://infinity-box.com/?r=100199
[14:13:52] send sw log text https://infinity-box.com/?r=100199
[14:13:35] Select another loader
[14:10:55] Download latest boot pack... And choose kg7
[14:10:41] Pls hep da error on kg7
[14:08:05] Are u sure with factory firmware.... At first whats the problem?
[14:05:42] I\'ve tried it\'s indicated da error
[14:05:08] Am using cm2 and I Ve the latest update
[14:04:22] Use Cm2
[14:03:50] Please house 8 need w661w nvram
[14:03:37] Owner doesn\'t remember phone pin
[14:02:10] I want to wipe factory
[14:00:16] Help admin
[13:59:57] Problem?
[13:58:26] Want to identify Tecno kg7 its giving me Da error
I have tried all the built-in loader it\'s the same o
[13:34:59] I need help urgently
[13:34:44] Itel a661w frp remove, I’m getting this error
[13:23:59] Yes
on Orginal Rom
[13:20:17] Nokia C30 reset
[13:12:25] Mtk android 11 but not spd and mtk android 10
[12:55:56] Try with built-in loaders
[12:31:26] reinstall setup then repeat
[12:30:38] Operation : Identify Device [ v2.35 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek USB Port (COM20)
MODE : BOOTROM
PORT : 20
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 09B1AF42D5D12A560B68B9183642296D
BROM : SecLevel : 0x000000E5
BR
[12:30:31] LE6 RESET
[12:17:50] Please anyone can help me with P661w fdl boot file
[11:54:30] all e-mails was answered
If you got no answer yet you must double check e-mail address or you must check SPAM folder
see e-mail address here https://infinity-box.com/contact/
[11:52:47] use CM2MT2.exe
also you can try with latest beta version https://infinity-box.com/?r=100202
[11:49:58] Use right da file
[11:49:38] send sw log text https://infinity-box.com/?r=100199
[11:49:23] Click here @FlashFileSearchBot and type there phone name. You will get links
[11:49:05] if you can get only one file per day it means your support period is expired
Renew support
[11:47:52] - use another USB cable
- connect cable to another USB port
- make \"Switch to HS USB\" Off
[11:47:50] INFINIX X612
[11:47:16] What device?
[11:44:50] How to download https://infinity-box.com/support/
[11:44:47] Operation : Identify Device [ v2.35 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek USB Port (COM22)
MODE : BOOTROM
PORT : 22
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : BF801D5C072722BDD094F153F9D01CAB
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA

[11:44:17] Yes
[11:44:05] Nothing found for wiko kool

If you will get the file upload it to support with iosFileUploader

[11:43:52] We need solution on jump to brom, someone should please help out.
[11:18:22] Solution 100% https://infinity-box.com/?r=100103
[11:17:52] Click here @FlashFileSearchBot and type there phone name. You will get links
[11:17:34] bad advice
[11:17:22] https://infinity-box.com/?r=100189
[11:17:00] Click here @FlashFileSearchBot and type there phone name. You will get links
[11:16:53] You must check hardware once again carefully
[11:14:49] Hi,
Is it really works?
[11:14:16] Oh, friend... If you really know something please post here CPU type/ver/subver/release dat otherwise your idea is little bin useless
[11:13:07] Official Infinity web site https://infinity-box.com/contact/
[11:12:39] TP may helps
[11:09:34] Where is sw log text?
[10:21:11] #CM2MT2 connection issue solution is HERE
[10:21:11] Operation : Identify Device [ v2.36 ]

Mode : FLASH
[+] SecureData Backup
[+] AutoBoot
[-] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
CHIP: MT6765 SBID: 0x8A00 H
[10:20:22] ❌Big Scammer ❌
@SMDSUPPORT

@SMDRAMDISK6

@GsmHarrd

@toolssmd

@SMDRamdisk

@SMD_officials

@SMD_Distributor

@ApsUnlocking
https://apsunlocks.com
[10:18:07] logs >?
[10:17:59] Already done it, still thesame issue
[10:13:34] install boot pack from support area
try select listed tecno/infinix/itel models
[10:13:17] Device can\'t connect via brom mode and no da support for it
[10:12:18] install boot pack from support area
try select listed tecno/infinix/itel models
[10:10:25] Error : Fail to init protocol
>>> Remove battery and cable. Check cable/connection/drivers and repeat operation!

Tecno kg7h no brom mode
[10:10:25] #CM2MT2 connection issue solution is HERE
[10:10:25] === [14-09-2022 08:39:42 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===
S/N: 50170972 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.36
Load IDBase v723487 Ok

Update configuration...
Socket Error # 11001
Host not found.
Finished

Load IDBase v723487 Ok
Operation : Identify Device [ v2.36 ]

Mode : FLASH
[+] SecureData Backup
[+] AutoBoot
[-] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
Wait...

1. Power Off the device
2. Wait 20 second
[10:08:17] Send email link
[09:54:16] Latest security don\'t have brom mode anymore.
[09:47:44] Hi
Note 9 Merlin
imei Repair Support
I Remove This
[09:34:36] There are different methods to connect the device.
You can try. See more at support forum please
[09:29:48] why ?
[09:29:33] add theme background
[09:09:17] I beg please ,because others post qualcomm problems and here i think we can but we are not deal as the group aim
[09:08:10] Hello guyz ! Some time people wrong the message we sent here .This group created to post information about cm2 user .So if you post your fault must be Mediatek ,spreadtrum and rda
[08:58:41] What is the use of brom option in cm2
[08:41:16] Note 8 network problem after charging circuit board replaced,any software solution?
[08:40:07] Someone please help me..
[08:37:49] You have a wiko y82 k630 .pac file. I\'m willing to pay.
[08:34:09] ✍️✍️✍️✍️✍️
https://t.me/joinchat/4lWxRwRcu8czNmJk
[08:27:35] Please I need solution on jump to brom
[08:25:06] Okay
[08:24:51] Check the infinity folder .bin file delete
[08:24:34] @Trillioncoin2
[08:18:50] Trillioncoin2
[07:54:02] Need redmi selene firmware
[07:47:42] No issues found too
[07:44:47] Make this https://infinity-box.com/?r=100155
[07:44:47] Cm2 not opening solution
[07:33:15] Thanks
[07:33:06] Working perfectly
[07:32:57] Yeah
[07:29:40] Does cm2 support windows 11
[07:19:47] ترمیم انلاین گوشی های سری سامسونگ قیمت پایین✅✅✅😍😍😍
بدون روت
پیش نیاز knox 0
استعلام قمیت پیوی
@HADI_GSM
[07:18:25] Share wiko k_kool firmware can\'t find it
[07:13:04] Oppo a33 Qualcomm
Nvram invalide
Invalide IMEI

Help me
[06:49:46] in tryagin download this error
[06:49:25] no i download file but desconnect
[06:48:24] Just renew your activation
[06:48:04] Your activation is expired
[06:47:41] التحميل اليومي ملف واحد؟
[06:47:32] i download one file only
[06:47:14] ineed reset download plz
[06:46:59] hello
[05:41:19] Found 12 files hisense
1. recent_10_Hisense_E30_Lite_S01_06_HG
2. HMobile_Hisense_F22_MT6737M_7_0_alps_mp_n0_mp1_V1_0_2_hs6737m_35_n_P1_2018_03_22_17_21_stock
3. Hisense_MT6589_Hisense_HS_U970_u970e_6_4.2.1_ALPS.JB2.MP.V1.2
4. Hisens
[05:40:38] 😂😂😂
[05:40:35] 😒
[05:40:31] Find/
[05:35:53] Please guide me, prepared target, my itel A58 help me, up to 3 months i need solution
[05:33:17] Not supported this old model.
[05:33:09] Problem?
[05:31:39] Can\'t connect test point
[04:42:59] GOOR REPARAR IMEI NOKIA 625.1 RM 942

InfinityBoxTalks 2022-09-13

[22:44:27] Pls help me on how to repair imel number for X665B hot 12i meta mode is not working
[22:43:53] Pls help me on how to repair imel dor X665B hot 12i meta mode is not working
[22:42:14] You are welcome too
[22:02:52] no worries i will try thank you
[21:05:04] Nothing found for x6820

If you will get the file upload it to support with iosFileUploader

[20:47:26] Mtk infinix note 8i
[20:42:58] Cpu type??
[20:38:48] Bd4j
[20:34:47] Wwbwwwww
[20:34:47] Wwbwwwww
[20:34:47] Wwbwwwww
[20:34:47] Wwbwwwww
[20:34:46] Wwbwwwww
[20:34:30] The email link you sent
[20:17:46] Connect internet and sign in to your iOS account
[20:06:02] Download factory signed firmware bro and flash with it
[20:04:49] Brom disabled and all available loader not possible...
[19:57:21] Where have you sent it?
[19:55:26] Palm play security plugin
[19:53:39] Well sir I didn\'t get a reply to my mail yet
[19:50:34] Easybuyer
[19:50:14] What was client complaints before trying to flash?
[19:49:38] Even when trying to flash, it won\'t
Always end with check battery messages after it is boot done
[19:49:34] I wanted to flash that phone
[19:48:35] But it identify successfully
[19:48:24] When trying to do read back or backup nv ram it won\'t work
[19:48:04] what error?
[19:47:55] Have Cm2 fix error on KG5K
[19:47:43] your PC firewall or antivirus blocked server access
[19:47:00] copy to sw dir
[19:46:28] Quite often you can use default built-in loaders or loaders for similar model.
Have you tried with similar loaders?
[19:45:40] fast
[19:41:11] yes sir
[19:34:54] Dear infinity-Box Team, please add Tecno KG5J boot in preloader mode in next update
[19:28:39] Initial problem before this?
[19:27:34] Download the uk off file a d paste in root directory of each module
[19:26:56] Can you perform factory reset?
[19:25:32] Its Qualcomm bro, only if your usb is not good enough or device port has fault
[19:16:24] Please friends how do I solve this problem
[19:12:40] Wait for reply
[19:11:40] My cm2
[19:08:06] I Want Repair It By Hydra
[19:07:28] It depends what imail said but some sms no need to reply
[19:07:13] Yes
[19:03:29] just repair bb
[18:50:57] Or you don\'t have internet
[18:50:30] Poor Internet connection
[18:29:19] Admin sorry to ask. If I send a mail by infinity mail address, long will it take to get a reply?
[18:24:19] How to enable imei module in cm2 pls
[18:22:43] A326b 5g test point not working please help me it show phone locked
[18:04:26] Please add boot loader unlock on sp2
[17:58:15] samsung?
[17:56:56] how do I check the cpu sir?
[17:42:57] What is the cpu type?
[17:36:04] smgts5620 network lock pls?
[17:34:21] to day contacet me on gosting id iftikharrana58
[16:55:14] You don\'t have credit on dongle
[16:28:51] This job need credits but your balance is zero
[16:20:39] Did you managed coz wanted to send you 1
[16:18:16] Tnx
Fix It
[16:17:08] Tecno Le7 imei repair
[16:12:37] Balance 0
[16:08:53] Where could the problem be?
[16:02:06] Okay let me send you
[16:00:38] Bless you brother, I speak English 🙏
[15:55:06] Do You Have note 9 backup ?
[15:54:44] Dont Have a Backup
[15:53:01] Restore nvdata & nvram using memory tool
[15:49:16] Redmi Note 9 Unknown Baseband Support ??!!
[15:33:07] phone must be powered off
see more here https://forum.gsmhosting.com/vbb/f641/
[15:32:00] Open that link please and see what to do
[15:24:21] Not connecting on Qualcomm module
[15:23:56] I try not working
[14:45:22] Octoplus FRP Tool v.2.1.9 is out!

Octoplus FRP Tool v.2.1.9 Release Notes:

Added Repair IMEI A/B, Unlock / Relock Bootloader for the following Oppo devices:
A1k (CPH1923)
A31 (CPH2015)
A31 (CPH2029)
A31 (CPH2031)
A31 (CPH2073)
A31 (CPH2081)
A5s (CPH1909)
A5s (CPH1910)
A5s (CPH1912)
A73 (CPH1725)
A91 (CPH2001)
A91 (CPH2021)
A91 (CPH2063)
F5 Youth (CPH1725)

Added about 50 new Qualcomm loaders, and improved method of Qualcomm EDL Autodetect.

Added Reset FRP operation for the following devices:
Oppo A36 (P
[14:42:19] Try multiple times but !!
[14:33:52] Octoplus FRP Tool v.2.1.9 is out!

Octoplus FRP Tool v.2.1.9 Release Notes:

Added Repair IMEI A/B, Unlock / Relock Bootloader for the following Oppo devices:
A1k (CPH1923)
A31 (CPH2015)
A31 (CPH2029)
A31 (CPH2031)
A31 (CPH2073)
A31 (CPH2081)
A5s (CPH1909)
A5s (CPH1910)
A5s (CPH1912)
A73 (CPH1725)
A91 (CPH2001)
A91 (CPH2021)
A91 (CPH2063)
F5 Youth (CPH1725)

Added about 50 new Qualcomm loaders, and improved method of Qualcomm EDL Autodetect.

Added Reset FRP operation for the following devices:
Oppo A36 (P
[13:27:51] Ta1264 simlock
[12:53:32] yes
[12:52:57] 😰😥
[12:52:36] Am certain it was accurate i just unlocked another phone before this 1and it was done successfully but when it comes to nokia it always says wrong password
[12:51:02] now account is blocked
you must keep your password safe

good luck!
[12:50:35] === DongleManager [Infinity] v1.81 [9/4/2022 09:46:01] ===
Searching...
Card-Reader: Generic EMV Smartcard Reader 0
HWID: 00002A9021F34082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Serial No (S/N): 428A2A90
Firmware version: 0153.02
=> Online Service:
- Username: 00428A2A90
- Password: KLLMzeeb
[12:50:04] Wrong username or password
[12:49:17] Reset password or e-mail HERE\r
\r
Apply username and password this way
[12:49:17] Card found : 428A2A90 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.20100
[12:40:47] Please help to remove MEIZU 16TH PASSWORD
[12:39:05] Nokia 3.1 firmware product name Es200wwFIH product name essential2_00w
Please who can give me a link to the exact file
[12:22:19] BEWARE ALL ❌❌❌
APS. UNLOCKS DANGER SCAMMER
HE HAS TOO MUCH MIND
FIRST I DID DEPOSIT OF 1000 USDT ❌
THEN SUDDENLY HE BLOCKS MY ALL API ON WEB
AND REMOVE ME
HIS WEBSITE www.apsunlocks.com
All users are requesting to beware from HIM ❌❌❌
WE WORK HAD FOR OUR CUSTOMERS BUT HE SCAMS EVERYTIMES
❌❌❌❌❌🚨🚨🚨
telegram id
@ApsUnlocking
[12:12:15] Not supported here
[12:09:59] Do you have link given to you by DongleManager?
[12:08:53] Some tools support this
[12:04:20] whats about vivo mtk repair imei
[12:03:57] whats about xiaomi mtk imei repair
[11:57:42] Fault code: 70
[11:49:03] Setup server access https://infinity-box.com/?r=100166
[11:48:27] clear?
[11:48:00] Please read here https://infinity-box.com/service/
[11:47:27] Make this https://infinity-box.com/?r=100155
[11:47:06] news https://infinity-box.com/news/

2.36 is in test stage
[11:46:16] What is the username?
[11:45:41] copy/paste TEXT here and you will get instant solution
[11:35:34] GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.201005.001 V1.230_B01 release-keys
Platform Version: MOCORTM_20A_W21.15.3_P5_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_20A_W21.15.3_P5
HW Version: sc9863A_modem
CMP_Time : 05-11-2021 10:59:41

MODEM TAG : MOCORTM_20A_W21.15.3_P5_Debug_4G_MODEM_20A_W21.15.3_P5_sc9863A_modem_sharkl3_pub

NVMng : SecurityInfo
IMEI[1] : 356748975044565
IMEI[2] : 356748975044573
WIFIMAC : 44917C0E2A8E
BT_MAC : 4
[11:35:34] Card found : 6BA11C5B , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

R
[11:20:38] does infinity support
[11:20:29] ta-1216 read code
[11:19:51] hellow
[11:16:45] CM2 MTK 2.36 Release?
[11:06:46] Help me why this?
[10:09:59] Spd
[10:07:54] Ok thanks. Am confused that\'s why. The one from cm2 manager can it be changed?
[09:59:13] The one from the cm2 manager
[09:51:34] Because the two password are different.
[09:50:22] Hello everyone pls which of the password am I going to use on my Cm2 dongle interface? The one from cm2 dongle manager or the one am using to download flash file from cm2 site.
[09:39:46] Qualcom
[09:29:35] Android HS USB NEMA AF20
[09:24:45] Please anyone help me to identify this phone CPU
[09:05:28] Even with updates, the same error message is displayed. 😢
[09:04:05] Solved
[09:01:50] same probleme my friend
[09:01:03] Here is the message its show me when i want to perform frp tecno BD1
[08:48:27] i need to have access over server in other to zork
[08:48:00] please i need help
[08:47:40] i have this error =Request fail: HTTP/1.1 500 Internal Server Error
[08:46:29] i can\'t reset my cm2 infinity email account
[08:45:56] HI
[08:37:27] Safi
[08:16:51] anybody help
[08:16:38] y21 frp failed august security
[08:16:35] Cm2 wont
[08:13:46] INFINITY BOX 🟢
*10 CRÉDITOS CM2 275MT*
*20 CRÉDITOS CM2 550MT*

*Formas de pagamento*
*Mpesa - 846653232* ✅
*P24 - 846653232*✅
*Emola- 866653232*✅
[08:09:35] Hi redmi 9a imei repair update failed.
[07:42:04] buy Infinity here https://infinity-box.com/
[07:41:45] select another loader!
[07:41:09] Hey pls where can I get NCK box
[07:20:19] Yes
[07:18:35] Samsung a10s network unlock
[07:15:53] #CM2SP2 connection issue solution is HERE
[07:15:53] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Realme : C21Y_C25Y_RMX3261_RMX3262_RMX3263
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported d
[06:57:29] Use server
[06:57:13] Not working
[06:56:37] Use combination plus firmware
[06:55:59] G900fd
🤦‍♂
[06:55:09] Have permanently solution, but is not free ✅
[06:42:40] Hummm😢
[06:42:30] New security
[06:42:22] No way
[06:34:25] Connect device while holding volume up key sir
[06:31:21] Use Universal Unlock Tool
[06:26:34] Your SN?
[06:26:10] https://www.youtube.com/results?search_query=ta-1318+hard+reset
[06:21:11] please explain
[06:20:22] inbox is little bit forbidden here, you may get ban
if you know how to fix write here for everybody
[06:19:50] Make this https://infinity-box.com/?r=100155
[06:19:33] send sw log text https://infinity-box.com/?r=100199
[06:17:44] Brother not open
[06:14:46] APSUNLOCKS.COM owner needed urgently
[06:09:21] Ta-1318
Please any one help me to hard reset
This phone nokia ta-1318
[05:38:22] DM is not allowed here sir...
[05:35:11] Hahaha... Nivwira.
Naikenja ila 😁
[05:33:43] Dm
[05:32:09] Already solved this by modified firmware and King cm2 👍 and small trick..!
[05:20:24] Do firmware update on dongle Manager it will open
[04:06:31] K7 API support file please
[03:55:47] Plz
[03:55:17] Aby idea or solution
[03:48:11] Ta-1318
Please any one help me to hard reset
This phone nokia ta-1318
[02:31:58] Cm2 can\'t flash kg5j latest security
[00:54:27] Nothing found for coolpad 3622a

If you will get the file upload it to support with iosFileUploader

[00:54:11] Coolpad 3622a qcn needed
[00:53:33] Found 1 file KG5k
1. Tecno_KG5k_F062_11.0_GL_V034_20220214

InfinityBoxTalks 2022-09-12

[21:06:04] Help for SPD bootloader unlock
TECNO
KG5H
INFINIX
PR651E
PR652B
PR652B
AND OTHERS
SPD CPU
[21:04:57] Help next update
[21:02:30] Help for SPD bootloader unlock
TECNO
KG5H
INFINIX
PR651E
PR652B
PR652B
AND OTHERS
SPD CPU
[20:33:52] you have two forums at your choice
[20:02:56] It’s not showing new thread on my account
[19:10:02] M,
[18:59:28] Not connecting at all
[18:59:24] I mean when I click SLA
[18:59:03] Sir connect but stop at a point
[18:56:11] You are welcome
[18:54:38] Thankssir
[18:53:49] I need help on the trick
[18:53:34] Kg5j jumping to brom?
[18:50:36] Hold the vol+ and vol- before inserting the USB cord
[18:49:33] Guys please why is it if I click Local SLA phone will connect
[18:49:22] Hold the volume buttons before you connect USB cord
[18:48:25] Sorry sir but what the cause
[18:45:42] If you want to buy something please contact to any seller https://infinity-box.com/buy/
[18:44:41] I mean this chat rules and your photos my friend

read https://infinity-box.com/?r=100172
[18:38:12] What do u mean by seifie
[18:37:39] Guys please what the cause if I click local SLA phone will not connect just charging.

Sir don\'t understand what u mean by seifie.. cost I connect USB but the phone only charge
[18:28:03] Nokia ta-1352 network Unlock through diag mode can\'t succeed any help Techs
[18:24:47] Please how is reseller ?
[18:08:56] What is the CPU type?
[18:07:23] hello, I also have a tablet that has been reset and asks for the google account, the one I got is the eboda a200, how can I reset it again or go through the google account, it doesn\'t have volume buttons so I can enter recovery mode
[18:05:57] perfect
run it
[17:58:56] Will need to do ISP
[17:57:52] That\'s my cm2 Folder sir
[17:44:23] Let me check there what\'s new wid da update.
[17:43:15] tell him to come back in some time.
He is yours for sure but later
[17:42:31] your selfie says you didi not connected cable to phone
[17:41:55] It can not be true
give me screenshot of your cm2 folder
screenshot but not photo!
[17:35:46] Hold + and - together and connect the phone
[17:21:11] Guys please what the cause if I click local SLA phone will not connect just charging
[17:08:00] Avae
[16:42:36] When I copy and paste it it brings errors and cm2 sp2 stops opening
[16:17:01] I lost another customer TA1380 :⁠-⁠( b
[15:40:29] Click here for [BEST] licence info https://infinity-box.com/?r=27&a=47
[15:37:09] Русским по белому сверху написано, что тут группа на англ языке и были дадены ссылки на русскоязычные группы.
[15:36:17] Скачал, при запуске ругается на лицензию.
[15:35:25] Thanks
[15:34:09] log text?
[15:33:39] It looks like your dongle support period is expired.

You can use previous software versions unlimited.
If you want to use latest software updates you should renew support.

Contact to any seller https://infinity-box.com/buy/
Send your dongle S/N to seller
Order [CM2] support renew for 1 or 2 years

How to check support date - https://infinity-box.com/doc/?r=17
[15:31:14] TECNO SPARK 8C KG5J Jumping to brom solution anyone? have
[15:26:29] But I have no problem with 2.33 version
[15:26:12] I can’t run infinity mt2 2.34 and 2.35
[15:01:36] Thanks
[14:46:52] You\'re welcome
[14:45:31] Thanks got it
[14:18:08] give me text my friend
I have no time to look at your selfie and type it at my keyboard

Respect other people and other people start to respect you too!
[14:17:04] No solution for a032f frp?
[14:00:34] Here sir 👆
[13:54:28] Hi,
log text?
username?
[13:52:13] Hi mates my dongle denies my IOS username and password on a certain phone
But on others its says its correct and flash successfully any ideas on what\'s the problem
[13:30:40] try and post result
[13:30:28] PDT tool at Infinity server https://infinity-box.com/support/
[13:29:48] Vivo t1 5g frp cm2 support?
[13:27:00] see sw log for info
but it may be unavailable
and diag may have a problem for some units
try everything well
[13:25:39] a022f can remove code without lose data ?
[13:21:07] CPU PLATFORM DETECTOR LINK PLEASE
[13:20:41] Platform detector link please
[12:47:51] Please
[12:47:42] File
[12:47:07] Uk edition please
[12:42:41] Yes
[12:38:13] Diag is error whats is bootkey for flash mode
[12:37:05] it do nt restart, it just can not connect
always try both modes, falsh and diag
[12:36:02] is imei at phone label the same as in log text?
[12:34:58] What is in sw log?
[12:34:32] send sw log text https://infinity-box.com/?r=100199
[12:29:29] Network lock
[12:29:23] Nokia c10 ta-1342
[12:29:07] Check svc then restarts
[12:26:15] Can cm2 remove huawei ID ?
[12:25:20] Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : k112-user 10 QP1A.190711.020 1650076454 release-keys
Platform Version: MOCORTM_17C_W20.28.1_P2_Debug
Project Version: pike2_pub
BASE Version:
[12:25:07] smart reset extra
[12:24:37] Can cm2 remove huawei ID
[12:21:53] A032f
[12:18:11] I have tried those keys still no success
[12:16:57] Whas problem
[12:16:51] Hi i have c10 nokia i want to unlock but when enter in diag device restart
[12:15:52] How to solve this error
[12:09:25] Volume up+down not work
Up not work
Down not work
[12:08:39] read sw log text
[12:07:46] Which keys?
[12:04:51] select another loader
[12:04:34] bootkey
[12:04:19] https://infinity-box.com/support/
[11:50:54] Not supported?
[11:37:45] If no repair security for oppo 0 update
[11:37:36] How do I connect?
[11:35:38] I am trying to identify a Tecno kg5k and I get this error, can you help me?
[11:32:53] Connect and disconnect from power off
[11:29:20] A032f frp boot key?
[11:27:51] Any solution here
[11:08:26] This one is a Mobicel Oreo
[11:07:03] not all
it depends on model
[11:06:32] Not working
[11:02:51] @linustech24 here is my log
[11:01:44] Any network lock requires credit
[11:01:23] It require
[10:58:12] i unlocked it on Diag mode but it didn\'t require credits
[10:55:45] reboot PC
charge battery
use another usb port
do it again
[10:54:53] It requires credit
[10:54:53] use software but not language file
[10:54:27] Tecno pop5 BD2p
[10:54:22] Phone is still on locked status
[10:53:55] This is the error message I received from cm2 trying to extract 😢
[10:53:53] support server
[10:53:33] Good!
[10:53:17] Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : k112-user 10 QP1A.190711.020 1650076454 release-keys
Platform Version: MOCORTM_17C_W20.28.1_P2_Debug
Project Version: pike2_pub
BASE Version:
[10:52:53] Просто скачать и запустить BEST2
Адреса групп на других языках тут https://infinity-box.com/contact/
[10:51:09] Found 9 files k990
1. RM_693_07.48_rm693_07.48_005.image_l_pcs_cl_v2_9k990
2. RM_693_07.48_RM693_059K990_07.48_005.vpl
3. RM_693_07.48_RM693_059K990_07.48_005_signature
4. RM_693_07.48_RM693_059K990_07.48_005.dcp
5. [10:46:38] Ho i Can past it
[10:39:26] Which model to phone
[10:33:00] Come for permanent
[10:32:52] Never works
[10:29:48] This trick not working right now brother..
[10:29:29] easy peasy
[10:28:49] Then help us to solve this MDM permanently
[10:28:36] Make backup firmware
Backup nvram
Ful flash/ format flash
Reapair baseband if need
Put nvram
Chang IMEI.
[10:24:27] Though Kopa remain but first priority is to revive
[10:23:43] M-Kopa and came to my office while is dead... But now i managed to revive it by easy trick with King cm2.
First, i unlocked bootloader
Then i flashed signed firmware (will show below)
Now set Ok again
[10:06:55] What was the problem with it before flashing?
[10:01:01] How did you get this update?
[09:42:01] Всем привет. Такой вопрос. Есть инфинити бест для нокий, новые модели он уже не поддерживает. Можно обновится, или нужно новый свисток покупать под бест 2?
[09:37:33] #CM2MT2 connection issue solution is HERE
[09:34:02] With which tool?
[09:28:11] Any with firmware for this mobile help
[09:27:55] Tecno KG5j error while flashing👆
[09:26:58] Operation : Write Flash [ v2.36 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Disabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Enabled

Files :28
[FL] : Set : preloader_kg5j_h6126.bin
[FL] : Set : md1rom.img
[FL] : Set : spmfw.img
[FL] : Set : tinysys-scp.bin
[FL] : Set : sspm.img
[FL] : Set : lk.bin
[FL] : Set : logo.bin
[FL] : Set : boot.img
[FL] : Set : dtbo.img
[FL] : Set : tz.img
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.im
[09:22:22] https://www.nirsoft.net/utils/blue_screen_view.html
[09:22:22] Volume + nope
Volume - nope
Combo key vol+ vol- nope
[09:22:03] Volume + nope
Volume - nope
Combo key vol+ vol- nope
[09:21:33] Yes simple
[09:21:30] send sw log text https://infinity-box.com/?r=100199
[09:21:22] Factory rest Emmc
[09:21:07] Diag closed so no anything happen when i hold boot key..
[09:18:38] Yes what next?
[09:17:44] First put phone to fastboot
[09:15:42] Kg5j latest security
[09:14:01] What do you mean \"not detected\"?
[09:13:41] send sw log text https://infinity-box.com/?r=100199
[09:13:29] send sw log text https://infinity-box.com/?r=100199
[09:13:19] What?
[09:10:08] You guys should update the boot
[09:09:55] 🔥🔥🔥🔥🔥🔥❤️❤️🇲🇼🇲🇼🇲🇼🇲🇼🇲🇼🇲🇼
[09:09:50] Tecno kg5j flashing not supported Brom error
[09:07:35] Infinity #CM2SP2 boot pack v1.11 released with updated loaders https://infinity-box.com/?r=100186
[08:31:38] How to fix ZTE blade A5 2020 shows #sim card locked permanently ??? I was trying to repair in cm2sp2 but reports that #device not locked
[07:37:51] Nokia C21 Plus TA-1433 Network Lock, help please
Phone not detected by Pc
[06:55:41] https://dl1.infinity-box.com/00/pub/?dir=/software/beta/
[06:47:09] Where you are download 2.36 version ?
[06:46:32] https://forum.gsmhosting.com/vbb/f296/poco-x3-gt-chopin-smart-reset-done-3064860/
[06:26:07] Disable driver signature enforcement in advanced settings.
[06:19:45] Change windows
[06:19:20] How to solve this problem
[06:19:12] Hello
[05:15:09] Select 7731e boot okay
[03:35:08] who has the file wiko y82 model : k630 .PAC help me i want buy

InfinityBoxTalks 2022-09-11

[21:11:32] Cm2 can unlock this meizu M1E?
[20:52:15] How do to remove frp on Samsung Galaxy s7 edge by using infinity box/dongle cm2
[20:39:53] Nothing found for hisense u963

If you will get the file upload it to support with iosFileUploader

[20:37:17] Please help me what\'s the method for unlocking Samsung Galaxy s7 edge using infinity box/dongle cm2?
[20:32:23] Yes it stuck on logo
[19:32:54] Is there hmd flash server on ios?
[19:32:38] After use vpn works
[19:30:59] Why?
[19:30:45] I did but not working
[19:23:54] Click to Reset IP
[19:17:27] Anyhelp not login to ios account IP OUT OF RANGE?
[19:13:25] I can\'t login to my ios account it says ip out of range anyhelp
[18:21:40] Any suggestions
[17:58:41] Open the fone, do tp- remove frp
[17:56:51] Unlocktool? Yes
[17:55:00] U have unlocktool?
[17:48:42] Samsung A03 (A035G) FRP unlock ?
[17:46:58] Already done it
[17:13:53] Firmware (FW)
[17:13:30] I can help u fix this, u with fone already?
[16:00:05] You can test and send your result
[15:59:34] Perfect!
[15:59:21] No problem friend, all drivers are at Infinity web site, as ordinary https://infinity-box.com/support/
[15:58:39] Yes, Hua was activated for this dongle about 5 months ago.
If you have a problem with Hua now please contact to Hua supporters http://forum.gsmhosting.com/vbb/f930/
[15:48:56] Please help my pc doesn\'t Sense Android phone\'s which driver should I download
[15:44:34] If you power on ZTE A5 2020 it shows on display #sim locked permanently .
[15:42:29] Reconnect PowerCable! Operation Identify [ v2.14 ] BootMode FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 BOTH VOL , 2 VOL+ , 3 VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion SPRD3 Boot INF ZTE Blade-A5_2020 Sending Init Boot ... Boot sent! Kick FDL ... BootVersion Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL 0x0004 FDL EMMC_RO False ; EMMC_PART True ; EMMC_RPM
[15:38:09] I tried to unlock network on ZTE A5 2020 finally showed done but device not locked let me send a sw txt
[15:34:57] G925t
[15:24:11] Yes
[15:03:34] Pls help mi KG5k easy buy spd2
[15:02:34] Pls help mi KG5k easy buy spd2
[15:00:38] Pls help mi KG5k easy buy spd2
[14:48:48] Cm2
[14:48:26] Hello, please can I remove frp on Samsung Galaxy s7 edge by using infinity box
[14:24:06] I don\'t see this version on server
[13:51:07] Cm2 is really the best tool I know and their support team too are really helpful
[13:47:52] Cm2 team should update their cm2mtk2 tool Brom Jump solution is what we\'re asking for
[13:40:20] Yes even 11 and 12
[13:31:35] How to flash Nokia x2?
[13:17:56] === [11-09-2022 05:24:44 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===
S/N: F5B32454 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.35

Load IDBase v312457 Ok!

Can not get data from server
Username or Password is wrong, set it at Settings tab
How to configure server access https://infinity-box.com/?r=100166

Load IDBase v312457 Ok!
Operation : Repair Security [ v2.35 ]
Mode : FLASH

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PT
[13:16:34] https://forum.gsmhosting.com/vbb/f296/zte-blade-a31-lite-network-unlock-done-3064705/
[13:16:26] https://forum.gsmhosting.com/vbb/f296/zte-blade-a31-lite-network-unlock-done-3064725/
[13:16:17] https://forum.gsmhosting.com/vbb/f296/poco-x3-gt-chopin-smart-reset-done-3064860/
[13:07:42] Hallo camon 18p not writing imei . Says not supported
[12:46:23] Yested?
[12:36:00] Found 9 files A107f
1. Samsung_SM_A107F_MT6765_samsung_SM_A107F_11_RP1A.200720.012.A107FXXU8CUI2_RP1A.200720.012_a10s
2. Samsung_SM_A107F_MT6765_samsung_SM_A107F_10_QP1A.190711.020.A107FXXU8BUF1_QP1A.190711.020_a10s
3. Samsung_SM_A107F_SM_A107F_11_RP1A.200720.012_A10s
4. [12:11:59] Link found 👍
[11:54:46] Admin MTK spd all drivers link please
[11:51:55] but my dongle antive with hua
[11:44:47] if you have TutuApp
for ios or android
[11:17:15] not all models are supported yet
[11:16:29] use built-in loaders
[11:16:05] Ok
[11:02:39] why
[11:02:33] ❓
[10:59:29] userdata safe cannot be done
[10:58:51] smart reset datasafe not working on infinix smart 5 x657c . error unknown vendor
[10:58:15] absolutely
[10:57:47] Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET DATA SAFE

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 0693D6488EA80B1C6819286ECC6C
[10:17:02] 😂😂😂😂
[10:01:50] Nokia c30 fdl file pliz
[09:29:30] Infinity should please bring more loaders for Qualcomm module
[09:16:24] Scammers
[09:16:16] 🚨🚨🚨🚨
[09:15:59] 🛑🛑🛑🛑🛑
[09:15:33] 🛑🛑🛑🛑
[09:15:18] 🛑🛑🛑🛑 scammers
[09:14:14] Mine have not detected it for once
[08:46:18] This is an infiniti product group. Not an electronics repair course.
[08:45:08] With reason.
[08:44:41] This is not a software glitch. Here you need to solder. Come to show how to solder and what to solder?
[08:44:40] With reason.
[08:43:34] This is not a software glitch. It needs to be repaired. Come to show how to solder and what to solder?
[08:42:06] well, I looked. and what?
[08:41:24] Adm look this.
[08:33:44] Same issue first time it detected second time not detecting anymore
[08:32:46] What pw?
[08:32:26] Hi,
use this to get data from the phone and to upload to server for calculation
http://dl1.infinity-box.com/00/pub/?dir=software/other/nk-sl3-logger/
[08:29:03] What\'s fw pls

Am new to cm2
[08:21:29] Google.com
[08:14:29] Need solution please
[08:11:50] Hi team I want to unlock Nokia sl3 phone via server but I dont have best any way out?
[06:33:32] Nothing found for infinix x665

If you will get the file upload it to support with iosFileUploader

[06:23:52] link
[06:23:41] please help me with infinix x665 firmware
[06:23:08] good day boses
[06:21:32] #CM2MT2 connection issue solution is HERE
[06:21:32] Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
MODE : PRELOADER PORT
PORT : 8
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM :
[06:21:31] realme c12 not booting
[05:59:35] Dm private
[05:57:22] Asante sana mtu wangu
[05:55:01] You\'re welcome, you will get it on different dealers around uvira, usijali sana, Cm2 dongle utaipata kwa araka
[05:51:45] Good
[05:51:13] No problem
[05:50:54] That is good can u continue in private please, to develop our conversation ?
[05:49:53] BUJUMBURA
[05:49:43] Come in BUJURA
[05:49:04] South-Kivu, precisely Uvira town
[05:48:17] Which part of DRC
[05:47:14] Ask any seller https://infinity-box.com/buy/
[05:45:27] To use Infinity [CM] software send your dongle S/N to Seller and order [b]Infinity [CM2] software activation with 1 year support[/b]

Sellers - https://infinity-box.com/buy/
[05:42:42] Another method you will order it from Alliexpress but it will take 1 month or more
[05:41:37] Or come to Dar es salaam Tanzania and i will help you to get it
[05:40:45] Find a person who deal with mobile accessories and tell him you need a flashing tools, ask him if he come to Dar es salaam, Tanzania and i will help him
[05:35:11] Please how can I buy cm2 dongle from DRCONGO ?
[05:34:36] Even my own the same problem
[05:23:48] How do to buy this software (infinity box/dongle cm2
[03:19:43] But it stucks at preparing target
[03:19:29] The fone was erased, am trying to flash it with a new factory signed firmware
[02:58:23] Hi
[02:19:24] Hi
[01:51:33] 🤝🤝🤝
[01:28:40] 👌👌👌
[01:25:52] 😍😍😍
[01:18:47] Already enjoying CM2MT2 v2.236
[00:17:06] Please how convert INFINITY BEST TO CM2
[00:15:39] Please by how

InfinityBoxTalks 2022-09-10

[23:08:12] Yes
[22:01:40] Nothing found for X6817 nvram

If you will get the file upload it to support with iosFileUploader

[22:01:17] Check your model here https://forum.gsmhosting.com/vbb/f296/reset-without-lost-user-data-write-here-success-reports-2997627/

and here https://forum.gsmhosting.com/vbb/f296/oppo-lost-data-after-safe-format-2997569/

post your report to forum
[21:59:48] You damaged your dongle with sharing.

Now use free repair method after sharing https://infinity-box.com/?r=100194
[21:58:54] you must enter username and password
[21:58:27] send sw log text https://infinity-box.com/?r=100199
[21:58:05] https://infinity-box.com/?r=100198
[21:57:53] Get dongle from any seller https://infinity-box.com/buy/
[21:57:20] in progress
[21:56:56] What one?
[21:56:45] what is the problem with the phone?
[21:56:09] you MUST post screenshot
[21:55:35] Really?
where is screenshot of your account with 20 charged credits?
do it imediatelly
[21:54:49] send sw log text https://infinity-box.com/?r=100199
[21:54:35] Leave it for now, friend.
beta version is for very experienced testers only.
You will get full install soon
[21:53:31] send sw log text
[21:53:29] Done 👍🙏
[21:52:58] Mi Account info https://forum.infinity-box.com/viewtopic.php?t=3947
[21:52:39] what is the software name and ver?
[21:52:09] What is the problem with boot process?
send sw log text
[21:51:31] You damaged your dongle with sharing.

Now use free repair method after sharing https://infinity-box.com/?r=100194
[21:50:36] Ask any seller for CM2 Dongle https://infinity-box.com/buy/
[21:50:02] Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[21:49:42] yes you can
[21:49:26] try mtk with stop button https://infinity-box.com/?r=100202
spd has the same in menu
[21:48:34] use another firmware file
[21:39:04] Developers, please add Stop/Cancel Button on both Mtk and Spd setups
[20:53:32] Ok, thanks
[20:49:48] Can I?
[20:43:24] I hope I can use my dongle on different system.
[20:27:26] how to solve this
[20:27:06] Card found : 88CF75D3 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.20100
[20:08:39] How do to buy full infinity box/dongle cm2?
[19:15:04] Make this https://infinity-box.com/?r=100155
[19:15:04] Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Box/Dongle misconfiguration
Diagnostic code: 66
10-09-2022 21:12:13
Username: 002B6ECC7D
==> Scan C:\\Users\\Dell\\Downloads\\DongleManager(2)\\ for report.log
==> Scan c:\\InfinityBox\\ for report.log
==> Scan c:\\Program Files\\ for report.log
==> Scan c:\\Program Files (x86)\\ for report.log
Found files: 0
==> Scan C:\\Users\\Dell\\Downloads\\DongleManager(2)\\ for fault.bin
==> Scan c:\\InfinityBox\\ for fault.bin
==> Scan c:\\Program Files\\ for fault.bin
==> Scan c:\\Pro
[19:11:17] === Started: 2022-09-10 9:07:54 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication stage error:
Server answer: [0031] Dongle identification data damaged.
Write to https://www.infinity-box.com/support/?r=2
[19:10:55] how to solve this
[19:05:23] am having a problem with my infinity box i cant update it
[19:00:55] Boot da pack boot itel A58
[18:56:52] Yes
[18:48:09] Hi cm2 boot itel A58
[18:44:43] DA FILE ITEL A58
[17:42:17] https://youtu.be/BDfgHZqfGSE
[17:21:56] Help I want read the firmware 🙏
[17:10:17] Engine\'s DA file A58
[17:08:36] xaiomi K30 mi account solution
[17:08:33] Help me
[17:05:41] Please cm2 boot ITEL A58
[17:03:43] 🥰🥰🥰🥰
[17:01:49] 105 4G
[17:01:33] Nokia ta-1385 no diag any with solutions l need to unlock network
[16:12:30] Not connecting when I check Local SLA
[16:07:28] Check on local sla
[16:05:24] Okay
[16:03:33] How to unpack over previous exe?
[16:02:38] Show full screen
[16:02:19] Check on local sla
[16:01:58] That\'s the one I was trying and it\'s giving me this error
[16:00:58] Try this, 0_base. Base v2112
[15:54:55] Infinix X665B
[15:54:13] This is mdm bro, model?
[15:52:56] It\'s saying this so I want to format it
[15:51:49] I\'ve tried all the da files but still getting the same error
[15:48:28] Same
[15:45:53] Check IOS login
[15:45:27] Ineed refund 2phones cut 20credits
[15:44:29] Select correct loader bro
[15:44:07] Model sir?
[15:43:08] Open : A661W-V390AE-11.0-OP-V006-20220109_0212_user.pac
VER : BP_R1.0.0
LEN : 2.79 GiB
CPU : A661W
VER : A661W-V390AE-11.0-OP-V006-20220109_0212

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : A661W
Product Model : itel A661W
Product Name : A661W
Patch Level : RP1A.201005.001
Display ID : A661W-V390AE-11.0-OP-V006-20220109
Ver. Incmt : OP-V006-20220109
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-01-05
Build Time : 09.01.2022
Product D
[15:42:44] How to unlock this one?
[15:42:16] Nokia 2720 flip hard reset
[15:35:28] can nokia infinty best relase new updates and add other nokia modal or stop all nokia best updates pleasevtell me
[15:24:08] 5
[15:18:24] T,to repair nokia c30 cost 10 credits?
[15:11:43] How can I do to get infinity box, i want to use it for unlocking, flashing and frp remove
[15:08:52] Anyone have solution for easy buy
[15:08:21] What can I do to get that software and it costs how much
[15:06:07] I need software infinity box for unlocking, flashing and frp remove?
[15:01:55] You mean the dongle?
[14:58:53] Please help me how do I get infinity box dongle cm2 ?
[14:56:43] Guys I need help ,Infinix X665B saying that
[14:56:09] Please help me how do to infinity box dongle cm2?
[14:53:09] Reset password or e-mail HERE\r
\r
Apply username and password this way
[14:53:09] Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.201005.001 V1.230_B01 release-keys
Platform Version: MOCORTM_20A_W21.15.3_P5_Debug
Project Version: sharkl3_pub
BASE V
[14:31:42] Serial No (S/N): 06483B72 Even if the tool is not turned on Registered: 12-May-2018; Expired: 23-Feb-2023
[14:29:32] hello
[14:24:24] Xiaomi agate it says unlock bootloader success... but still with unlocked bootloader
any would be the solution?
to unlock Xiaomi agate bootloader?
[14:16:48] can send you dongle from Kenya
[14:15:12] update to the latest spd usb driver\'s
[13:55:49] what is this error
[13:43:57] Ok sir I\'m gonna make payment tomorrow
[13:43:42] Nokia C21
[13:39:54] Pls how can I remove password in Sony Xperia C4 ?
[13:26:24] After phone identified please unplug phone from USB jack and go back to service menu tab and select frp/reset protection-click red margin format/fs setting and take usb stick then hold vol-again in Infinix x657 connect phone and passing welcome screen locked/frp if have it.
[13:25:13] Okay sir
[13:24:35] C\'est quelle marque
[13:23:01] Please any one help me
[13:22:56] How much costs to get infinity box
[13:22:51] 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : CosmoRefresh_00WW-user 11 RP1A.201005.001 V1.110_B01 release-keys
Platform Version: MOCORTM_20A_W22.04.2_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_20A_W22.04.2
HW Version:
[13:22:51] Card found : FCF7A70C , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...

>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : SP Unloc
[13:19:41] I only understand English
[13:19:14] Owk thanks much
[13:18:48] Allez-y je suis Alibaba et passez votre commande
[13:18:29] Just select cm2mt2-Infinix-raphael v2- identify-connect phone through USB stick by hold vol- in order to detect on pc
[13:16:37] I\'m from Uganda
[13:15:56] I\'m not sure for 💯 but you can do that with infinity within 4 minutes
[13:15:27] which country are you in
[13:14:38] ??
[13:13:54] How to do payment and how do to get infinity box dongle (cm2)
[13:13:33] S\'il vous plaît je veux débloquer mon téléphone Samsung s10e verizon
[13:11:00] I need it, how do to make onder
[13:10:02] I\'m Kampala Uganda
[13:09:40] How do to get it, I\'m in Uganda
[13:07:59] please can I remove password Infinix smart 5 (x657c) without data lost with cm2?
[13:01:26] Service available sir
[12:57:44] How much costs to get infinity box
[12:50:38] I\'m called sserwadda Brian from Uganda. I need software how do to get infinity box dongle (cm)
[12:47:09] How can I do to infinity box /dongle (cm2)
[12:44:52] How do to infinity box software
[12:27:17] Please I need nvram for X6817 HOT 12
[11:40:48] Can i reset forgotten password on nokia c1 2nd with cm2 ..reset buttons not workin
[10:54:56] hi bro can u help i have this error
[10:23:13] Reset password or e-mail HERE\r
\r
Apply username and password this way
[10:23:13] Card found : 5EA80D1E , v0153 Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14 Load IDBase v8331 Ok! VER : BP_R1.0.0 LEN : 005495FE ( 5.29 MiB ) CPU : s9863a1h10 VER : +255755889265 Operation : Identify [ v2.14 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : INFINIX PR652B frp reset pac fIle .pac Sending Init Boot ... Boot se
[09:55:44] I\'ve flashed Infinix smart 5 but the screen turns black after flashing was successful. Any solution please?
[09:48:46] send sw log text
[09:34:10] P0
[09:32:48] Successful done by cm2sp2, thanks alot of to support team
[09:10:26] Yes,its finance devices[mdm locked] policy not allow Brom operations]
[09:07:31] Do you have any example how it works?
[09:03:59] https://infinity-box.com/doc/?r=17
[09:02:36] If you want to use [BEST] software you need \"[BEST] software activation for Infinity [CM2]\"

If you have credits at your account:
- login to your IOS account - https://infinity-box.com/service/
- go to Products menu
- select BB5 Easy Service Tool [BEST] software activation for Infinity [CM2]
- enter your S/N

If you have no credits at your account:
Contact to any seller https://infinity-box.com/buy/ and send your [CM2] S/N to seller
[09:02:20] 🙅‍♂
[09:01:36] What is the username?
[09:01:07] There
[09:00:51] Make this https://infinity-box.com/?r=100155
[08:39:26] For now use meta mode
[08:35:49] Infinix, Tecno & Itel disabled brom mode on latest security, please add new security via preloader mode.
[07:04:31] That\'s bot for you
[07:03:45] 😁
[07:03:32] Try here @FlashFileSearchBot
[07:03:32] I have file
[07:03:27] Yes .
[07:02:55] Recovery mode pics?
[07:02:25] Galaxy A03core koppa can you permanent dm me
[06:53:24] Nokia g20 imei repair by cm2 is okey but not change imei in phone
[06:52:35] Soon he\'ll
[06:51:46] Is Admin on here now
[06:51:15] Wait for admin intervention
[06:50:09] How sir?
[06:42:31] Run cm2sp2, check on diag mode then retry frp reset
[06:41:46] SPD
[06:38:26] 491389DB
[06:36:52] As in?, point not clearly stated further elucidate
[06:36:26] Type here your sn
[06:36:08] Download firmware from support and flash with cm2mt2 bro
[06:30:00] Just try them and find out.
[06:28:19] No sir
[06:28:06] Not working very well when useing it
[06:22:56] Please guide line to check if my cm2 is outdated I don\'t want to be taken unaware
[06:20:14] andriod 9
[06:19:58] how can i flash samsung A10s eith cm2
[06:19:33] Not possible for now bro within this premises
[06:19:02] Let admin intervene to your case here
[06:18:38] Download official firmware and flash bro
[06:18:01] Infinity best licences is needed on cm2 dongle for infinity best functionality
[06:17:21] Ask for code or invalid sim shows
[06:16:55] Ok, I get your point, in your case you need to know the hardware architecture of each device, note that each device contains partitions that controls each hardware component likewise there\'s a partition that allows device connectivity with system either in brom or preloader mode literally known as Downloading Agent(DA), if this is not present then device connectivity will not be granted 👌💯✅
[06:09:36] Hi bro please how can I unlocked bootloader SPD chipset
[06:08:59] Chipset?
[06:08:37] Use 0_base, v2044
[06:07:24] Force restart a d perform a factory reset bro
[05:58:43] Chipset?, and does it request code?
[05:58:01] Device state before flashing?
[05:57:39] Install last cm2sp2 bootpack bro
[05:56:38] No bro
[05:55:33] Access denied username and password
[05:51:18] Please add also
[05:50:48] Where is repair imxx options in New exe MTK2
[05:44:40] This is wat my cm2 says pls help
[05:43:43] Bump
[05:18:43] Yes
[05:04:58] anyone fixed?
[04:32:03] What\'s done?
[00:22:33] Please how update best infinity to CM2
[00:12:54] SM-A135U how to unlock network

InfinityBoxTalks 2022-09-09

[23:45:21] https://youtu.be/BDfgHZqfGSE
[22:18:10] After repair imei oppo f1s where is the problème
[21:39:47] And I suggest you try to use PC and browse support forum,
there are a lot of info there
[21:38:51] in your case - use defaults
[21:36:55] Alright thanks boss let me try please
[21:17:52] Lemme assume that I have tecno LC7 which is version 11 and I want to perform Frp how do I know which boot that will work. If it legacy2, legacy3 or Rapheal.. how to know the very one that will match it.
[21:15:53] I guess u mean this🖕
[21:14:13] I know 11 when I see it but know there boot that match it is challenging
[21:05:43] click here https://infinity-box.com/
select brand (manufacturer name) and click to it
see model and CPU that you must select
[21:04:57] ok, leave it friend, I have a method for you
[21:04:33] sir, do you know the difference in hardware and software?
[21:03:25] I mean android version 10 and 11 how do will know boot that match each of them.
[21:03:14] FRP
[21:02:07] install this https://infinity-box.com/news/?r=4265
[21:01:18] wait more
or post sw log text
[21:00:57] send sw log text https://infinity-box.com/?r=100199
[21:00:36] what is 10 and 11?
[21:00:06] How do we know the default loader for all this version 10and 11 phones
[20:53:34] Please I still need help over this please
[20:08:45] Hello house after resetting frp on Infinix PR 652B by cm2sp2 phone powered on but still hanging in #XOS logo from today 17:27 PM untill not finishing to set up, how to fix please.???
[20:05:07] Who can unlock oneplus 8 5g from network lock
[20:01:56] https://drive.google.com/file/d/11LtreRPjJEefTGkbTq2pYS3FeM_DSDUk/view
[19:59:06] Done
[19:40:35] Pr651h boot pac file
[19:40:14] https://forum.infinity-box.com/viewtopic.php?t=5011
[19:39:33] use default loaders
[19:39:31] problem soft thanks
[19:38:42] i cant fond kd6 the list
[19:38:03] what is the problem with built-in DA?
[19:35:15] pls tecno kd6 da needed pls
[19:34:35] Found 11 files tecno kd6
1. Tecno_KD6_H6116G_QGo_RU_201211V198
2. Tecno_KD6a_H6118AC_QGo_200325V115
3. Tecno_KD6a_H6118AC_QGo_OP_211009V202
4. Tecno_KD6_H6116I_QGo_ZAVC_201211V25
5. [19:14:07] Make this https://infinity-box.com/?r=100103
[19:03:19] Any solution on cm2
[18:52:17] SM-A035F KG Status locked
[18:30:20] What it shows
[18:29:36] Cm2 mt2 2.35 not open
[18:27:14] Connect the internet
[18:26:44] Best file
[18:26:39] Can be fixed find best solution and flash
[18:26:14] https://youtu.be/ESvxnYhNwuk

GIFT FOR ALL
THANKS FOR BEING THERE FOR US
www.michaelmobilecare.com
[17:47:06] I formatted this Nokia ta1270 with test point, now didn\'t come up and stuck at bootroom, always show mediatek driver when connected to PC, any solution?
[16:45:19] 😘😍
[16:44:59] thanks bro more appreciation to u big up
[16:41:51] 862359046288160
[16:40:20] Send imei1.
[16:40:03] yeah
[16:39:37] Ask network unlock code?
[16:39:25] yes
[16:39:18] ?
[16:39:16] Unlock network
[16:39:10] Bro u963
[16:38:59] then
[16:37:31] First.
[16:35:25] Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 862359046288160
IMEI[2] : 862359046288178
I
[16:34:34] Send photo.
[16:34:17] Send logs.
[16:34:04] Still not passing
[16:28:00] OK BOSS
[16:27:09] With idetifiy.
[16:26:56] Just start
[16:23:05] IN FLASH MODE OR JUST START WITH IDETIFY?
[16:22:15] click to IDENTIFY button first
[16:13:24] >>> Error : Device NOT INITIALIZED ! Initialize it first via \"IDENTIFY\" !
>>> Make sure you have made \"IDENTIFY\" first!
[16:05:51] FLASH mode
[16:05:37] https://forum.infinity-box.com/viewtopic.php?t=5629
[16:05:10] send sw log text https://infinity-box.com/?r=100199
[16:04:53] Nothing found for BD2d-VP613DEF

If you will get the file upload it to support with iosFileUploader

[15:41:06] BD2d-VP613DEF-RGo-OP-220728V11
[15:41:02] Please who will help me generate this file link
[15:36:15] Please how can I fix this problem
[15:25:33] https://forum.gsmhosting.com/vbb/f296/zte-blade-a31-lite-network-unlock-done-3063257/
[15:25:25] https://forum.gsmhosting.com/vbb/f296/nokia-105-4g-ta-1385-network-unlock-done-3063395/
[15:25:16] https://forum.gsmhosting.com/vbb/f296/zte-blade-a31-lite-network-unlock-done-3063398/
[15:10:28] Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 53446 release-keys
Platform Version: MOCORTM_18A_W20.31.2_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.31.2
HW Version: sc9832e_modem
CMP_Time : 07-28-2020 20:36:20

MODEM TAG : MOCORTM_18A_W20.31.2_Debug_FM_BASE_18A_W20.31.2_sc9832e_modem_sharkle_Smart_Phone

NVMng :
[14:23:11] Nothing found for kg5j

If you will get the file upload it to support with iosFileUploader

[14:09:00] Excuse me ma people how can i remove admin on Alcatel 5007u by Cm2
[14:04:15] send sw log text https://infinity-box.com/?r=100199
[14:01:42] Please any solution
[14:01:33] DA SYN char Not received
[13:59:05] https://infinity-box.com/?r=100189
[13:57:07] model?
log text?
[13:56:44] you must disable antivirus and run as administrator!
[13:56:01] try https://infinity-box.com/?r=100202
[13:36:55] help me frp on infinix x657B
[13:36:16] #CM2MT2 connection issue solution is HERE
[13:36:16] 1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2044 | Manual : Enabl
[13:25:05] https://support.halabtech.com/index.php?a=downloads&b=file&id=611082🙏🙏🙏
[12:50:41] itel a661l boot file for lazy people like me
[12:37:53] Android 11 sorry
[12:37:45] Why is it that most android after reading FW successfully once I flash back the FW it always bootloop
[12:28:00] Pinlock
[12:27:48] Ta-1289 suport?
[12:03:37] It doesn\'t detect it when i plug the phone with diag mode the phone will just power on
[11:58:13] Dm
[11:52:51] I restart but did not work
[11:52:25] I restart still did not work
[11:46:12] Anyone ? :(
[11:43:09] post it for everybody
[11:42:36] 1 year or 2 years plans are available
[11:42:04] sw log text?
[11:41:18] log text?
[11:40:41] reboot PC and try again
If problem still exist try this https://infinity-box.com/?r=100202
[11:40:22] Pls forum any idea on how to remove plugin from android 10 devices mtk
[11:39:45] Perfect!
[11:39:01] Failed to obtain file handle. Access failed please cause and solution
[11:23:23] Who have successfully reset Nokia C30(TA-1359) with cm2
[11:22:59] I don\'t know why is not working for me i even reset C20 yesterday successfully
[11:18:59] help me redmi 9a after saccessfully imei repair by cm2 the phone still show the original imei
[11:08:02] bump
[11:01:18] waiting for reply
[11:00:21] done
[11:00:18] send
[10:58:24] https://infinity-box.com/contact/
[10:57:43] Hello, my client paid a 2nd hand INFIINITY-BOX, old owner don\'t remember email and password, need support to reset password and old email to new email.

USERNAME: 006FB8525C
FACTORY PASSWORD: ZNHGxgzs
NEW E-MAIL ADDRESS: ellmachucadoservice@gmail.com

NEED IN ORDER TO RENEW SUPPORT
[10:41:54] Kk thanks
[10:41:42] Yearly
[10:41:05] ???
[10:39:37] Cab the activation be done monthly?
[10:39:19] Kk thanks
[10:39:17] NOKIA 1.4 password and frp solution needed?
[10:38:11] https://infinity-box.com/price/
[10:37:57] Can I get the link to that
[10:37:37] you can check all on Infinity Online Service
[10:37:22] But what\'s the average price
[10:37:04] Depends on reseller
[10:36:26] Yearly cm2 activation cost how much
[10:36:01] Permanent by firmware
[10:24:53] done after latest Boot pack
[10:24:27] Logs
[10:24:25] Monitor screenshot not allowed
[10:24:02] read FW device Not suport Help Me
[10:11:38] I got solution
[10:01:53] Here is complete
[09:58:45] Complete logs send
[09:58:10] Trying to unlock TCL A2X
[09:57:54] Hey SPLock Error : empty LTD
[09:41:19] select another moodel or use built-in default loaders!
[09:31:30] Dm
[09:31:26] Device Connected!
BootVersion : SPRD3
Boot : INF : INFINIX MOBILITY LIMITED : X6511B
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
[09:31:20] Help
[09:31:06] Infinix PR652B mdm anti relock with cm2 solution please?
[08:58:03] need help unlocking network 🙏
[08:49:32] what is the problem with the phone?
[08:26:33] After format whole flash...
This is the error respond I got...
Any helps?
[08:24:09] where is sw log text?
[08:23:40] plz explain
[08:23:13] Plz It,s very important for Everyone ..
Team Infinity CM2 Any Solution plz
[08:20:44] Ok
[08:20:20] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[08:20:20] Inbox
[08:19:46] Vivo New Security Update Dead After Frp Reseting ... Solution plz ????
[08:14:21] anyone with the file for discover note 8 plus mt6592 inbox me pliz
[08:09:10] Need to be reloaded
[08:08:23] vivo y21a unlock dead
[08:08:07] what is the problem with the phone?
[08:07:31] Nothing found for y360-u72

If you will get the file upload it to support with iosFileUploader

[08:06:45] select another loader
[07:50:17] #CM2SP2 connection issue solution is HERE
[07:50:17] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : L5006C-F3212_A23-Pro
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[07:49:18] Card found : 3B4916F9 , v0151
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : 010.01.026
MemoryInfo : EMMC :
[07:30:28] did everything but phone seem not to connect
[07:29:50] Connect well
[07:28:15] help nokia 2.4 ta-1270 failed to connect with tespoint
[07:28:10] Y360-U72 /file
[07:26:36] Card found : xxxxxxx , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v723487 Ok!

Update configuration ...
Load IDBase v723487 Ok!

Preloader [HW DEV] Info :
EMI : DEV : MT6765
EMI : SRC : preloader_t99651aa1.bin
EMI : CNT : 0004
EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]
EMI : [02] : DRAM : LP_DDR4X : ID : NO
[07:25:35] Card found : F93D35EE , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v723487 Ok!

Update configuration ...
Load IDBase v723487 Ok!

Preloader [HW DEV] Info :
EMI : DEV : MT6765
EMI : SRC : preloader_t99651aa1.bin
EMI : CNT : 0004
EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]
EMI : [02] : DRAM : LP_DDR4X : ID : N
[07:23:10] What\'s the issue pls
[07:22:48] What is the solution pls
[07:22:33] Use cm2 spd module
[07:21:36] Huawei y360-u72 flash file sir
[07:15:09] need help nokia ta-1396 how to remove patren
[07:14:56] hi admins sir
[06:30:21] I have solution
[06:29:52] I have solution for this
[06:01:46] Sp2 doesn\'t flash device, stop at prepare target
[05:53:08] what was the problem with the phone?
Is it stuck on boot logo?
[05:52:23] Try and post sw log text
result?
[05:51:48] it\'s just latest cm2 versions but not officially released yet.
you can test it.
but if you do not underdtand how to unpack and us - just wait for official release and Installer
[05:50:29] It\'s something related to you Windows, check https://www.google.com/search?q=0x0c000007b
[05:19:12] So easy
[05:17:38] 😂😂😂😂👇🙊
[05:16:56] ✅
[05:09:30] I try ti reinstall but same issue
[05:09:10] Yesterday it was working ok
[05:08:41] Cm2Mt2 failed to start this error showing
[04:21:52] Is these work together with mt2
[04:21:10] Use built in loader bro
[04:19:01] NOKIA 1.4 password and frp solution needed?
[04:07:11] I think needs loader from firmware, not supported without loader in flash mode
[03:50:08] Mobile neo 1 spd anyone done frp
[03:39:05] Sc7731
[03:03:36] when I thought about the way things have been recently, i owe my thanks to God for letting me find this amazing personality, i mailed Mr. Robert Grayson ago, I was actually very uncertain about investing, very scared because i was also low on cash.l gave it my all, my first investment of $ 200 two weeks ago brought me $ 2000 last week, and what intrigues me the most is the way he handles he partners, i recommend him too to my friend jeff, after trading with him, his testimonies have let me come here to
[02:42:28] Please help! Itel A661w keeps stopping here when I try to flash full firmware.
Any solution
[02:19:57] Nokia HMD C10 C20 C30 Password unlock inb0x mee

InfinityBoxTalks 2022-09-08

[23:34:27] Dm
[23:34:02] I send log tomorrow
[23:15:00] That\'s a good test for sure thank you team.
[23:06:55] Wow am trying this out
[22:26:55] Please help me me out please
[22:04:18] Good work but please improve your Qualcomm tools
[20:59:13] Oppo a33 qcn file help me
[20:58:55] Hello
[20:34:04] Click here @FlashFileSearchBot and type there phone name. You will get links
[20:33:49] old drivers may work.
But It\'s good idea to install latest derviers from Infinity server
[20:33:05] reboot PC and try again
[20:29:54] https://infinity-box.com/?r=100200
[20:29:35] Make this https://infinity-box.com/?r=100103
[19:08:05] Hello what about SPD bootloader unlock solution SPD2
[19:04:26] Sir,
Will the older version of the cm2spd2 driver works with this new cm2spd2 latest?

Can old driver works for the new ?
[19:03:25] === [08-09-2022 11:51:44 C:\\InfinityBox\\CM2MT2\\CM2MT2.exe] ===S/N: 5E5B7571 v0153Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.35Load IDBase v312457 Ok!Can not get data from serverUsername or Password is wrong, set it at Settings tabHow to configure server access https://infinity-box.com/?r=100166Load IDBase v312457 Ok!Operation : Unlock BootLoader [ v2.35 ]1. Power Off the device2. Wait 20 seconds3. Connect USB cable to deviceWaiting for device connection...PTFN : Miracle DA USB VCOM (And
[18:50:34] Found 3 files tecno pr651h
1. Tecno_PR651H_F6317_11.0_OP_V032_20210602
2. Tecno_PR651H_F6317_11.0_OP_V052_20211025
3. Tecno_PR651H_F6317_11.0_OP_V046_20210827

[18:49:43] Nothing found for zonko k118

If you will get the file upload it to support with iosFileUploader

[18:49:21] Solution available sir 💯👌✅
[18:38:22] Select wrong mode how please sir
[18:37:43] Tecno Spark 7 model number-PR651H please how do I get the Nvram?
[18:34:07] You select a wrong model
[18:33:30] SW version : CO2-4200-0-00WW-B01
need this flash
[18:32:43] Big good work team especially on log view & screen shot wonderful.
[18:31:56] Please I really need a help about it please house
[18:31:20] Please I have been trying to flash this Nokia 2.3 ta-1206 but it do stop here
[18:22:24] Team please add remove locks in preloader port
[18:20:24] Please I need Nokia 2.3 ta-1206 Auth file please
[18:00:35] tablet devices
[18:00:03] i need firmware ZONKO K118
[17:59:51] hi there
[17:50:07] Tecno Spark 7 model number-PR651H please how do I get the Nvram?
[17:45:01] Why my cm2 not working when I open cm2mt2; the dongle will take off
[16:56:27] Stylo bold plus payjoy removed how?
[15:03:15] Nokia 1.4 factory reset solution pls (QUALCOMM DEVICE
[15:02:40] Nokia ta-1288 frp and factory reset
[15:01:47] Same issue.
Tried reading FW, but doesn\'t go through shows error.
[14:48:36] Most probably emmc, try with flash mode and software.
[14:46:59] What\'s this error please?

Emmc?
[14:42:34] @ernestomobiletech2 warning the group is related to infinity only
[14:42:09] ok
[14:41:40] Inbox is forbidden here
[14:41:14] inbox mee
[14:40:52] Redmi 9A network unlock possible?
[14:38:45] I really like the infinity dongle, but there is only one thing missing, the QLM update
[14:37:38] Lower version or equivalence version
[14:33:32] okay now i takw which version?
[14:32:35] Thanks
[14:32:28] You\'re using higher version instead of lower version or equivalence version
[14:31:48] i cannot understand you sir.
[14:31:22] Use a lower version bro
[14:29:09] https://infinity-box.com/?r=100196
[14:29:00] Pls any help on how to root android 11 mtk
[14:29:00] What is your new security means?
[14:28:55] yes
[14:28:48] After flashing boot.img I always get bootlooop
[14:28:34] what was the problem BEFORE your tries?
stuck on boot logo?
[14:28:26] Pls is there any way to root mtk android 11 without flashing boot img and vbmeta....I
[14:28:10] the fone was 408 and mine is 901
[14:28:08] download loaders from server and be happy https://forum.infinity-box.com/viewtopic.php?t=5369
[14:27:38] was stuck there. seems to have been flashed with wrong firmware
[14:27:08] yes
[14:26:44] What is the problem with it?
[14:26:30] what is the problem with the phone???
is it stuck on boot logo?
[14:26:09] For this, try using lower build version
[14:25:54] what is the problem with the phone???
is it stuck on boot logo?
[14:25:45] i was flash formating the fone
[14:25:33] What do you mean?
Examples and log text?
[14:25:31] just detecting spd port only
[14:24:44] s phone stuck on boot logo?
[14:24:16] you must install 7-zip
[14:24:04] Open : A661W-V390AE-11.0-OP-V006-20220109_0212_user.pac
VER : BP_R1.0.0
LEN : 2.79 GiB
CPU : A661W
VER : A661W-V390AE-11.0-OP-V006-20220109_0212

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : A661W
Product Model : itel A661W
Product Name : A661W
Patch Level : RP1A.201005.001
Display ID : A661W-V390AE-11.0-OP-V006-20220109
Ver. Incmt : OP-V006-20220109
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-01-05
Build Time : 09.01.2022
Product D
[14:23:53] I love diz
[14:23:32] https://infinity-box.com/support/
[14:23:31] NEVER GIVE UNTILL NO OPTION LEFT
[14:23:16] Do you have Infinity Dongle connected to PC?
[14:22:57] Nothing found for Tecno kf7j nvram

If you will get the file upload it to support with iosFileUploader

[14:22:44] Found 2 files Tecno kf7j
1. Tecno_KF7j_H696RTAjAk_R_OP_210820V452
2. Tecno_KF7j_H696RTAjAk_R_OP_211013V460

[14:22:26] is phone stuck on bootlogo?
[14:22:18] Kos I dnt have possible solution to it
[14:22:03] model?
log text?
[14:21:42] Yap
[14:21:09] what shud be done then?
[14:20:24] WHY GIVEN UP SIR
[14:19:37] so i give up?
[14:19:13] Mine use to do like that untill I gave up 4 SPD phones
[14:18:59] help me sir
[14:18:46] yes.
[14:18:32] SPD ryt
[13:53:23] my cm2sp2 always stuck at preparing target when have selected flash format, what cud be wrong please?
[13:49:19] yes
[13:36:18] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : P661W-F3120-11.0-OP-V033-20220224.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
[13:27:38] Please add P661W firmware on support🙏🙏🙏
[13:14:40] Please who can help me root Infinix note 8i
[13:11:03] b2
[12:59:28] Help pls!! Tecno kf7j nvram file
[12:44:17] it say smart card not found
[12:39:33] Download from infinity website
[12:33:06] can you give me other loader and setup cm2 mt2 fill
[12:32:17] Could you please assist me im stuck
[12:32:06] dose not work
[12:29:57] Try 12345678
[12:29:47] Same password
[12:28:45] CM2 MT2 Loder V2.21 still this one pass word
[12:26:46] Cm2
[12:26:09] 12345678 or 1111
[12:25:51] InfinityBox_install_CM2MT2_v2.30 one of can you tell me pass word
[12:24:53] Yes
[12:23:43] please i need this firmware or FRP solution
[12:23:13] Scared of dead boot
[12:23:10] https://www.x-tigi.com/index.php/HOPE-10-PRO
[12:22:08] u can flash the old version preloader backup current preloader and check for brom
[12:21:03] Hope it would be added via preloader mode in near future?
[12:17:02] X-TIGI Hope10 Plus frp or firmware please
[12:10:22] Tecno cc9 problem flashing pls 🙏 help me ?
[12:08:51] BL unlock is possible in brom mode
[12:08:26] Dear infinity-Box Team,

Tecno/Infinix disabled Bootrom on latest security.

Please add UNLOCK BOOTLOADER in preloader mode.

Thanks in advance....
[12:08:24] Flash file .... User data file crupt
[12:06:00] please i need help urgent X-TIGI Hope10 Plus frp
[11:58:29] Admin why itel a661w not including the upgrade?
[11:32:47] Please add tecno kg5j new security
[11:22:05] Please see sellers here https://infinity-box.com/buy/
[11:16:50] Am in Uganda Kampala I need cm2
[11:03:03] network unlocking help please
[10:59:58] Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.35

Load IDBase v312457 Ok!

Update configuration...
Configuration [12060] updated

Load IDBase v723487 Ok!
Operation : SP Unlock [ v2.35 ]
Mode : META

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM75)
MODE : PRELOADER PORT
PORT : 75
Waiting BOOT ack...
PRELOADER : ACK confirmed
INIT : META confirmed

Boot done

AP_CHIP : MT6580,S01
A
[10:59:13] What is it?
[10:58:14] knog guard state
[10:57:46] Found 2 files infocus m808
1. Infocus_Infocus_M808_ZM1_518H_0_00WW_A05_Signed
2. Infocus_MT6735_InFocus_InFocus_M808_ZM1_5.1_ALPS.L1.MP3.V2_FIH6753.65C.ZZ.L1_P49

[10:57:36] send sw log text https://infinity-box.com/?r=100199
[10:57:08] What file?
[10:56:56] Do you have phone drivers installed?
[10:50:10] okay thank you
[10:49:26] https://drive.google.com/file/d/1XF3ay7BMJAHrDc89Cofas7mPltD7kIfq/view?usp=sharing
[10:48:58] Meaning of this boss
[10:40:36] Still need the infocus m808 nvram
[10:29:25] Help me
[10:27:52] When will the new version of Qualcomm come?
[10:23:40] Flash file please
[10:23:19] To flash
[10:23:14] Can I help me
[10:22:15] Phone
[10:22:12] Tecno kg5j da file can\'t flash
[10:21:51] Can I use this? Is this official ?
[10:21:49] Hello
[10:18:44] deactivate
[10:17:48] Flash file please
[10:17:39] hi
i am need help
[10:14:18] remove what?
[10:14:03] send sw log text https://infinity-box.com/?r=100199
[10:13:22] i try still nothind dear sir
[10:10:08] please some should help me with the software that remove pok security for version 10 android
[10:09:31] oh...
unisoc and ums
[10:08:50] yes, there is a plan
[10:01:04] Which one I should download
[09:53:02] I mean, it updates
[09:52:29] Cm2 for Qualcomm Do you have a plan?
[09:43:58] THANKS ADMIN MY CM2 GOT FIXED 00548A8007 Is Now Working Thanks✅✅✅✅✅✅✅and Logins are 👍 okay
[09:42:38] https://infinity-box.com/?r=100198
[09:42:22] friend, install spd/unisoc drivers from Infinity server
[09:41:51] both together???
[09:38:39] plz help not conecting my computer
[09:34:47] cm2 sp2 not detecting nokia ta1385 plz help me for driver
[09:06:29] Hang on log and MDM lock
[08:55:40] Pls Admin can I flash redmi note 10 pro max with Cm2? It\'s a Qualcomm phone.
[08:48:12] Spd
[08:48:07] Any solution for kg5k easybuy
[08:46:50] Okay
[08:46:13] send sw log text https://infinity-box.com/?r=100199
[08:46:00] give me text
[08:45:36] ok
[08:34:30] I\'m having this issue on my cm2 this morning please any help
[08:30:01] make change to GUI too dark mode if possible
[08:25:22] What is the problem with it?
[08:15:37] you must install spd/unisoc drivers
1. click here https://infinity-box.com/support/
2. go to SoC drivers
3. get drivers there and install it
[08:14:20] you can try
post sw log text after that
[08:13:20] Mission impossible :(
[08:13:02] What is the error?
[08:12:46] I guess this file is not for you. It\'s for experienced testers only
[08:12:05] there is no such option like free card renew
[08:11:34] it\'s just for test for our testers
description is inside archive
[08:05:05] am i allowed to update card firmware for free to be able to use this Beta?
[08:03:20] infected system, scan or reinstall OS
[07:52:53] re install but same problem
[07:49:52] cm2mt2.exe system error anyone help 😞
[07:45:46] T,
[07:25:20] Would be good if you read the whole rar folder name. It\'s already mentioned there-1111
[07:24:05] Rar password?
[07:19:14] Thank u
[07:17:02] Oppo A16 Dead after flash, can I fix with Cm2?
[07:16:50] Infinity Chinese Miracle-2 CM2MT2 v2.36

- SmartInfo parser output revised
- NVRAM parser output revised
- Firmware remote verification enabled
- Preloader parser revised and fixed
- Peloader remote verification enabled
- \"KG State\" moved to Service page
- \"Help\" menu
- View log files by right mouse click on message window
- View log files via \"Help\" menu
- \"Logs\" button at main window to view log files
- \"Snap\" button at main window to make screenshot
- \"Stop\" button at main window
[07:15:24] Please Tecno BE7 not support
[07:14:46] Where can I see this on PC so that I can unstall it please I need help
[07:14:32] What brings this beta?
[07:13:48] beta/test software versions https://infinity-box.com/?r=100202
[07:13:13] ty bro. 🙏
[07:04:48] lol you need tks me :D
[06:47:37] Mi Account info https://forum.infinity-box.com/viewtopic.php?t=3947
[06:47:25] be sure you do not use any vpn and sharing tools are disabled
[06:45:05] Redmi 9 mi account relock after connecting internet.
Anyway to permanently remove mi 9 account with cm2?
[06:43:45] let le be like that but In this case I can not understand why do you login from browser from one IP and exe connect to server with another IP
[06:42:53] my pc of CM2 not have any tool sharing sir
[06:40:12] How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[06:38:45] usb over and usb redirector
[06:37:52] What sharing tool do you use?
[06:33:29] 004D151E1B
[06:32:39] What is the username?
[06:32:24] but i don\'t understand my login it was good entered
[06:30:49] it\'s C10 sir always done with cm2
[06:19:41] Perfect!
[06:19:25] you must enter GOOD username and password
[06:19:03] send sw log text https://infinity-box.com/?r=100199
[06:18:50] Is it your first c20 or do you have an experience with other c20 units?
[06:17:52] Tecno KG5J frp solution please
[05:58:44] NOKIA TA 1342 CM2 FAILED WITH CREDIT 🤔😔😔
[05:55:48] thank you CM2M2 🙏🙏🙏
[05:55:27] Done.
[05:34:18] https://mifirm.net/model/light.ttt#global
[05:34:02] Make this https://infinity-box.com/?r=100103
[05:33:42] Nothing found for redmi note 11e

If you will get the file upload it to support with iosFileUploader

[05:33:06] run CM2SP2.exe and do the job
you need 5 credits
[05:23:57] i need to unlock nokia ta-1385 with cm2 plz solution
[04:54:47] https://mirom.ezbox.idv.tw/en/phone/
[04:51:19] do we have a tested global rom for redmi note 11e (Light) MT6833
[04:49:28] Dongle manager -> report and fix button
[04:41:46] Cm2mt2 and sp2 not opening again after installing mt2 2.35 on my system, any solutions
[04:36:35] guys please. i need tested global rom for this. 😭
[04:32:54] ?
[04:32:42] it relocks bl too?
[04:32:04] phone alive again, with chinese rom.
[04:31:42] oh
[04:28:36] MT6833
[04:28:11] Redmi Note 11E (Light)
[04:27:42] restarts on fastboot mode.
[04:27:34] but after unlock bl and flash to global.
[04:27:17] device was working before.
[03:51:15] what problem??
[03:51:09] but tools auto close
[03:51:03] i use sp2 for sp unlock
[03:50:35] hi
[03:37:01] Redmi Note 11e already UBL, but after flash to Global Rom. restarts on fastboot. please help
[02:02:34] Hi
[00:49:02] Kick FDL ERROR
what that means?

InfinityBoxTalks 2022-09-07

[23:36:59] Itel s17
Please help
What could be the reason
I need help
[20:50:47] It ask for 15 minutes time with for 15 minutes then again unlock it
[20:50:08] Will post results tomorrow
[20:50:00] https://youtu.be/WGVy7TWQ3l8
[20:49:28] Go to about phone turn on the Adb then try
[20:48:53] Found 12 files g21
1. Wynncom_TD206B_HS_T961_WYNNCOM_G11_6820_20.01_256_MSG2133_NGPS_NVT_0
2. Enes_MT6572_alps_G21_f52kc5_alf_k601_6.0_ALPS.KK1.MP6.V1
3. Gaba_MT6572_gaba_A62_ratech72_wet_rlk_jb3_4.2.2_G212_GABA_S4_J_V0.3_20140620
4. [20:38:32] Nokia C20 can’t enter Diag mode for network unlocking
[20:31:23] Found 31 files G20, search limit is 20 files per server
1. Nokia_G20_NVM_MT6765_B36BEE10F7567413263DD296952B643F_G10_G20_nvram
2. Nokia_G10_NVM_MT6765_B36BEE10F7567413263DD296952B643F_G10_G20_nvram
3. GMobile_GMobile_G206_Coolsend_4MB
4. [20:25:50] Please what is the boot key for Nokia x2, mine doesn\'t connect?
[19:02:12] read text below the image
[18:23:09] in cm2 sp2
[18:22:44] but log tell me wrong
[18:22:20] yes this
[18:08:51] https://t.me/InfinityBoxTalks/111599
[18:05:29] Which one to download
[18:03:31] https://infinity-box.com/support/
[18:01:41] what is the problem?
[18:01:28] Where can I see it
[18:01:25] Advice me sir
[18:00:23] read https://infinity-box.com/service/
[18:00:20] Operation : Write Flash [ v2.35 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Disabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Disabled

Files :9
[FL] : Set : preloader_rlk8321_tb_ts_n.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : recovery.img
[FL] : Set : logo.bin
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0xC589FA28 [ 3.09 GB ]

1. Power Off the devi
[17:59:48] LNMX xxxxx
[17:59:29] i use Dongol manger info password
[17:58:40] you must use good password
read https://infinity-box.com/service/
[17:50:09] 0006576536
[17:46:27] you must unstall spd/unisoc drivers
[17:45:12] What is the username?
[17:42:34] Solution on this error
[17:32:01] Am getting there
[17:24:14] cm2 sp2