Infinity CM2, Infinity [BEST] @InfinityBoxTalks 25-Apr-2024 [page 35]
InfinityBoxTalks 2022-07-11
[11:37:58] When I select this option HW Report option not highlight on screen
[11:28:31] what is not clear here?
[11:28:19] Enabe FF mode in settings.
[11:26:49] v2.33 Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33
Load IDBase v1121431 Ok!
UserName and/or Password not set! Can\'t continue!
Load IDBase v1121431 Ok!
Operation : HW Report [ v2.33 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack
[11:25:43] Chinese Miracle II [MTK module] v 1.58
Operation : HW Test [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
[11:25:20] old version boot not supported
[11:23:02] It doesn\'t matter, I said what to do. And the old versions as an alternative
[11:22:09] when i select ff mode hw report option not highlighted
[11:21:06] 2.33
[11:21:02] Enable FF mode and try
[11:20:18] lyf ls5020 hang on logo. i need to verify that it will solve via flashing or its emmc issue thats why want to check health report but giving this error
[11:19:56] Or use 1.57/1.58 version
[11:18:53] what you need to include
[11:17:26] what is the issue
[11:17:18] Info : LEGACY : HW reporting feature available in FireFly mode!
[10:53:16] Redmi 9c M2006C3MG after flash in fastboot mode touch not working
[10:33:52] is it possible to remove password on tecno spark 8 without losing data?
[10:30:12] Send your Infinity username to seller https://infinity-box.com/buy/\r
How to know username https://infinity-box.com/service/
[10:30:12] How to buy points
[10:29:41] also need Credits
[10:29:28] Try 2.14 exe
[10:29:04] Operation : SP Unlock [ v2.13 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu_true-user 8.1.0 OPM2.171019.012 49520 release-keys
Platform Version: MOCORTM_18A_W18.46.3_P1_Debug
Project Version: sharkle_S
[10:28:19] Operation : SP Unlock [ v2.13 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu_true-user 8.1.0 OPM2.171019.012 49520 release-keys
Platform Version: MOCORTM_18A_W18.46.3_P1_Debug
Project Version: sharkle_S
[10:21:36] thanks alot, how can i remove password without losing data sir
[10:09:24] untick auto EMI in Setting
[10:09:24] Operation : Identify [ v2.32 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MTK USB Port (COM20)
MODE : BOOTROM
PORT : 20
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 1E252C9C58A6D3720BD1F33C0D007E79
BROM : SecLevel : 0x000000E5
[10:06:11] Check your drivers
[10:05:59] But hees trying to help..
[10:05:43] Just trying to help bro. I know it\'s not avangers grp
[10:04:50] This is avanger group?
[10:03:04] Avanger is also faild aftr that phone came on
[09:59:31] Nokia comes with locked bootloader use Avengers crack
[09:57:23] Can any one help . C10 new updates. When try to format is switching on
[09:56:24] Bro just unitstall libusb drivers it wil b came right
[09:48:18] what is the firmware version of the card?
[09:40:32] My dongle expired in February 2022, which setup version should I use for MTK2
[09:36:23] Come inbox
[09:33:37] Tecno spark kg5j firmware anyone
[09:24:05] Please help
[09:23:49] Hey guys I wanna save phone book from a Nokia ta1174 which is the correct tool? I\'ve seen in YouTube about nk2 is it still available?
[09:23:28] Can you help with the files if you have them
[08:53:31] Check on support area. If not present make thread on forum and I will upload file in sometime.
[08:51:56] Anybody with flash file..plz🙏
[07:47:58] yes sir..
[07:47:43] Check your computer for viruses.
[07:47:36] yes
[07:47:15] Possibly viruses on the computer
[07:46:47] with folder?
[07:46:13] many times sir..
[07:45:52] yes
[07:45:38] Did you uninstall the app and then reinstall it as I suggested above?
[07:42:22] please help
[07:19:29] I can help u do this
[06:53:16] Get good mdm files
[06:47:07] Nokia 2.4
[06:46:15] I did the test point, and I did flash the phone, but the phone didn\'t turn on again
[05:58:39] delete software and re-install it
[05:58:01] please Help. how we slove this error
[04:57:20] Done ✅
[04:49:23] You can send and e-mail or write massage to support forum https://infinity-box.com/contact/
[04:48:50] ,here he is.
[04:47:47] Were is yellow boss?
[04:47:12] C1 2nd Edition some time later
[04:46:11] Use this
[04:45:57] https://dl1.infinity-box.com/00/pub/?dir=/software/&uid=19184&file=InfinityBox_install_CM2SP2_boot-pack_v1.09.7z
[04:45:10] Install CM2SP2 boot-pack and use .fg loader
[04:10:28] stuck on logo please i need flash file
[03:56:32] how to operate flash
[03:37:48] Nokia TA-1380 network lock
[03:36:28] >>> Error : No PAC selected! Break!
[03:14:15] need
[03:14:13] https://easy-firmware.com/index.php?a=downloads&b=file&id=373445
[01:57:00] 1. Use FLASH MODE but not DIAG\r
2. Install latest SoC drivers UNISOC | UMS9117 | SPD\r
\r
You must check 1. and 2. ten times before read 3.\r
3. It may be seriously damaged phone (that is not supported yet)
[01:57:00] NVMng : SecurityInfo
IMEI[1] : 352022105215501
IMEI[2] : 352022105723504
WIFIMAC : A0F9E06BBB03
BT_MAC : 002B75207CAD
SEC : SLS:2, SKS:0, SKV:4
SLStatus : 3C
Status : Locked! Server unlock required!
Connecting to server...
Connected
Init...
Init failed: Wrong input data
>>> Error : Operation fail!
>>> Check previous message for more info!
Reconnect Power/Cable!
>>> Error : No PAC selected! Break!
>>> Error : No PAC selected! Break!
[01:56:59] #CM2SP2 connection issue solution is HERE
[01:56:59] Card found : 47AF8AF0 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
>>> Error : No PAC selected! Break!
>>> Error : No PAC selected! Break!
>>> Error : No PAC selected! Break!
Operation : Read FW [ v2.14 ]
Extra : Ignore CriticalPart Verify : Enabled
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
>>> ERROR : Protocol HandShak
[00:21:19] Itel w6501 fdl file please
[00:20:22] HELP ME
[00:18:22] post sw log text, model name and all details
[00:18:07] create thread with FULL info here https://forum.gsmhosting.com/vbb/f296/
[00:17:20] Admin please help
[00:02:17] Click here @FlashFileSearchBot and type there phone name. You will get links
[00:02:08] Click here @FlashFileSearchBot and type there phone name. You will get links
[00:01:35] and use latest DongleManager version!
https://infinity-box.com/support/?s=6
[00:01:08] you must disable your PC firewall and try again
[00:00:21] you must disable firewall and try again
[00:00:01] is it faulty emmc chip?
InfinityBoxTalks 2022-07-10
[23:59:30] use FLASH mode but not DIAG
[23:59:06] C1 2nd Edition some time later
[23:58:37] post sw log text
[23:58:23] When I do it, it comes back
[23:58:21] What is the CPU type?
[23:58:06] Please help. I want to permanent remove easiby on Tecno spark 8P
[23:58:03] you can contact privately this way https://infinity-box.com/contact/
[23:57:42] be sure latest MTK drivers installed well.
and you may try https://www.nirsoft.net/utils/blue_screen_view.html
[23:56:32] next time you will get ban for sales channel link
[23:55:28] next time you will get ban for other products advertiing
good luck!
[23:54:00] use flash mode
[23:53:31] This username is Ok
You must enter this username and password to software and try again.
your problem is fake username in software
[23:51:54] use test point
[23:50:57] Hi, please see examples for different models here https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/
[23:50:02] Hello,
Disable your PC Antivirus and Firewall or give enough access for BEST.exe
- Go to c:/InfinityBox/BEST/ folder
- Delete License_best_xxxxxxxx.ask file
- Delete License_best_xxxxxxxx.dat file
- Run BEST.exe
- Enter GOOD WORKING e-mail address and you will get licence file to your mailbox
[22:55:26] Please! Can CM2 unlock network lock on Samsung A12?
[19:09:58] How bro?
[18:39:52] Hello
[18:21:54] Please anyone who have the idea on how to root infinix s5 pro.....
[18:02:24] Anybody can say..which is the best credit unlock tool for samsung....
Samkey donot need.
Other tool
[17:32:54] Ghainmi@yahoo.fr
[17:06:13] Waot some time.
[17:03:33] hello
Please help to activate a new dongle, I not receive the license for my mailbox
Serial No (S/N): ACC31FAB
[16:28:36] 1. Use FLASH MODE but not DIAG\r
2. Install latest SoC drivers UNISOC | UMS9117 | SPD\r
\r
You must check 1. and 2. ten times before read 3.\r
3. It may be seriously damaged phone (that is not supported yet)
[16:28:36] Card found : 47AF8AF0 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu_true-user 8
[16:11:25] Try use this modele https://dl1.infinity-box.com/00/pub/?dir=/software/&uid=19184&file=InfinityBox_install_CM2SP2_v2.14.7z
[16:06:00] Very correct, this HMD a few can access.. We tired of getting scammed 👍
[15:36:24] Moto g20 hard reset
[15:35:37] Use last version. And local sla must be checked
[15:33:54] Hi steps how to use memory tool for mtk samsung frp
[15:33:07] Hi steps How to use memory to
[15:07:35] #CM2MT2 connection issue solution is HERE
[15:07:35] Operation : Identify [ v2.26 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
BROM : Enforcing BootROM
BROM : Enforcing Failed! Skip!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODE
[15:06:35] Full log please
[15:05:38] #CM2MT2 connection issue solution is HERE
[15:05:38] BROM : 0x00007024 : DA SEND ERROR!
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
[15:04:02] staff psychic on vacation. mentally did not learn to read the logs
[15:03:26] 🤔
[15:02:57] error
[15:02:42] Uae cm2mt2
[14:45:10] SM - A127F_U5_OS12_AutoPatch Tested✅
[14:33:10] frp help
[14:33:05] vivo 1907?
[14:32:34] #CM2MT2 connection issue solution is HERE
[14:32:34] Operation : Memory Tool Init [ v2.26 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
Operation : Memory Tool Init [
[14:32:21] Obtenga ganancias masivas aquí
Binarybitpay.com
[14:28:48] CM2 username
00397223B8
[14:22:25] Any solution on how to backup nvram and read the fw
[14:21:29] 2.4 mdm kicked by cm2 again by test point 👍👌
[14:19:21] Unable to unlock sim😩
[13:33:14] #CM2MT2 connection issue solution is HERE
[13:33:14] BROM : 0x00007024 : DA SEND ERROR!
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
[13:22:42] únete ahora y comienza a ganar
👇👇
Binarybitpay.com
[13:01:49] Service available
[13:00:25] Redmi Note 7 dual imei repair✅
[12:58:13] https://www.youtube.com/watch?v=a17aH4CZxtQ&ab_channel=telecomnh%E1%BA%A5tgia
[12:57:10] so which drivers to uninstall
[12:56:27] the driver lib not ok
[12:56:04] are you talking about that problem sir ?
[12:54:23] Service available but without signal
[12:50:50] https://t.me/Javohir9595
[12:50:30] remove all and install again
[12:49:42] hj
[12:49:01] who is admin
[12:45:25] after identify mt2
solution
[12:41:04] How to remove FRP Lenovo XT2155-9 K14 SPD
[11:53:53] Model
[11:52:24] Tecno bc3 unlock bootloader not successful
[11:49:06] Supported
[11:48:46] Ta1380
[11:06:23] what happened
[11:04:16] 1. Use FLASH MODE but not DIAG\r
2. Install latest SoC drivers UNISOC | UMS9117 | SPD\r
\r
You must check 1. and 2. ten times before read 3.\r
3. It may be seriously damaged phone (that is not supported yet)
[11:04:16] Card found : 47AF8AF0 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off devic
[10:51:17] Still not working
[10:37:18] Eft
[10:28:54] i need some help
[10:28:16] === DongleManager [Infinity] v1.81 [7/10/2022 3:23:58] ===
Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Card-Reader: Generic 0
HWID: 0000151E1CC74082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): E365151E
Firmware version: 0153.02
=== Process started: 7/10/2022 3:23:59 ===
Connecting to server
Server connection successfully established
Checking DongleManager version...
Version check error:
Socket Error # 10054
Connection reset by peer.
[10:10:45] Untick safe erase then flash
[09:55:13] Tecno bb2
[09:45:13] Phone model?
[09:25:46] Assist me with this issue
[09:25:24] Apart from cm2 dongle
[09:25:15] Please which box or dongle can I use to remove easybuy
[09:14:07] K7 firmware link
[09:14:07] https://www.hovatek.com/redirectcode.php?link=aHR0cHM6Ly9tZWdhLm56LyMhMmFnQzFTaVohRWZUWWJMSnQ1M0lSMVI5cnJ6THpLa0REd1FjUDdvU25JZWZzNHY1SGpwYw==
[09:02:20] This phone is MTK,not SPD
[08:20:06] K7 firmware link
[08:09:00] hi am in need of infocus s1e firmware
[07:34:40] and see ALL steps as per info
[07:34:29] sharing tools
[07:34:04] I don\'t have any anti-virus and the windows defender is permanently off but I only have this problem with sp2 only other tools works perfectly
[07:15:04] Fix your PC https://infinity-box.com/?r=100103
[07:14:41] use #FDL file https://forum.infinity-box.com/viewtopic.php?t=5369
[07:13:58] use DFL
[07:13:49] Found 1 file a661w
1. DA_SPD_USC_iTel_iTel_A58_A661W.fdl
[07:13:35] Reser Efs
[07:13:20] Sir, work about latest models is in progress.
Do not worry, we remember and now everything!
[07:12:50] post sw log text!
[06:03:45] File /a58
[05:47:05] What could be the problem?
[05:46:46] Whenever I\'m trying to identify a device using sp2 the tool closed itself why?
[05:34:50] Gane de esta plataforma confiable sin demora
👇👇👇
Binarybitpay.com
[05:09:12] A58 itel a661w.fg file
[04:58:14] yes you should wait for the time then do the job again it well be done
[04:14:47] DEAR INFINITY TEAM OUR ALL HOP IS ON YOU..
PLEASE ADD TO RESET AND REMOVE FRP ON SOME HMD NOKIA DEVICES DONT FORGET (NOKIA TA 1380 THIS DEVICE ITS SPD CPU BUT NO ONE CAN DO ANY JOB ON CM2
[03:36:33] Coolpad y81i mt6535 not frp with cm2 problem
[00:50:14] Это я на Пушкинской сегодня ночевал…
InfinityBoxTalks 2022-07-09
[23:48:13] Reset password or e-mail HERE\r
\r
Apply username and password this way
[23:48:13] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : BD4_Pop-5-LTE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FL
[23:48:06] noches
[23:21:24] 👏🏽
[23:15:07] log text?
[23:14:54] Use built-in loaders, it works
[23:14:15] emmc replacement
[23:13:45] pls check youtube
[23:13:22] You can check this page from time to time and see https://infinity-box.com/news/
[23:12:57] Hi,
use default loaders, it helps in most cases
[23:12:42] when
[23:12:18] alwujuhat la taemal
[23:12:04] use default loaders, it helps in most cases
[23:11:05] already updated well
do not update again
run software and use
[23:10:29] yes
[23:10:25] E9431E9D
[23:09:41] Will the Qualcomm module be added in the future?
[23:09:24] What is the username?
[23:08:07] https://infinity-box.com/buy/
[23:07:41] Good!
[23:07:27] What is the problem with the phone?
[23:06:24] What is the dongle S/N?
[22:24:52] ??
[22:23:05] ??
[21:27:15] A136u imei cert backup file needed any help ?
[19:57:15] Thanks.
[18:08:22] any solution
[18:07:53] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
UserName and/or Password not set! Can\'t continue!
Load IDBase v312457 Ok!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM Port (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM ini
[17:35:48] finally I passed the Factory with cm2sp2.
Thank
[17:33:00] Mdm1img noot9
[17:25:27] I would like to buy Infinity data explorer license from Aliexpress store. Please give me a trusted reseller name.
[17:00:14] https://youtu.be/xwYLEdhUC2A
[16:45:57] My account have credits
[16:22:04] Da file auth lg k350h, help?
[16:07:24] Please house I need assistance on how to fix mount efs invalid argument Samsung note8 N950FXXSGDUG6
[16:05:35] I can\'t find the model type in cm2sp2
[16:01:35] Hi
can anyone help me make
Factory of this phone with cm2sp2?
[15:21:49] Hmm. Nothing like that you can only rest
[15:20:35] Google search you will see video there
[15:19:42] How to Flash tecno pop 5p with cm2
[13:33:45] CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000
RNID : A143E8547C35C18F15A70643E6CD4635
DA : USB : HIGH-SPEED
Boot done!
Memory Info :
CID : 90014A484347386134A210112836B50D
CSD : D02701328F5903FFFFFFFFEF8A400027
MEM : VEN : HYNIX | OEM : 4A01 | DEV : HCG8a4
DAT : Size: 59640 MB, Max.Speed: 52000 kHz, blklen(512), nblks(122142720), ro(0)
EXT_CSD Info :
EXT_CSD rev. : v1.8 ( MMC v5.1 )
CSD struct rev. : v1.2
Supported command set
[13:33:45] Operation : HW Report [ v2.33 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM14)
MODE : PRELOADER PORT
PORT : 14
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x000000
[13:12:58] tecno spark 4
[13:12:46] Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : MD1IMG
FAIL : INVALID GPT
ERR : 0xC0030008
ERR : INVALID GPT
ERR : 0x00000000|0x03214FA0
[13:08:03] Itel A509w fdl
[13:08:03] Help
[13:07:07] Itel A509w fdl
[12:06:59] or way around it
[12:06:51] Nokia C10
2022 May 5 Android patch, seems diagnostics mode has been locked on this patch! trying but failing, anyone encounter this issue?
[12:05:47] 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
[11:49:53] Unlock iCloud iphone 7 plas
[11:49:27] Can you help me?
[11:49:15] Hi
[11:13:36] i have a problems
[11:13:14] Reset password or e-mail HERE\r
\r
Apply username and password this way
[11:13:14] Card found : 272124FC , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.20100
[09:39:21] need help
[09:39:08] Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!
Reconnect Power/Cable!
[09:39:07] Operation : Write Flash [ v2.34 ]
Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Disabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Enabled
Files :15
[FL] : Set : preloader_x650_h8029.bin
[FL] : Set : tkv.img
[FL] : Set : recovery-sign.img
[FL] : Set : cache-sign.img
[FL] : Set : lk-sign.img
[FL] : Set : lk-sign.img
[FL] : Set : boot-sign.img
[FL] : Set : logo-sign.bin
[FL] : Set : tee-sign.img
[FL] : Set : tee-sign.img
[FL] : Set : secro-si
[08:44:50] Help I want to remove password on realme rmx3151
[08:36:55] Then How about patch
[08:34:46] Can the A10s be repaired imei?
[08:25:09] https://youtu.be/pJjL6bKbwLc
[08:14:01] Mobicel star
[07:53:57] Network lock
[07:36:28] Samsung galaxy A52 flight mood problem when I slot SIM card inside the flight mood turn on automatically
[07:32:01] i have disabled my antivirus but i cant start any cm2 module.
[06:19:21] you need to scan virus in your pc
[05:34:12] Sure thanks let me check
[05:30:51] Check ur smartcad if its cm2 thn chek background if u have any cm2 module opened
[05:04:58] Help please 👆👆👆
[04:57:29] Use miracle latest version
[03:30:17] Any one help me vivo z3i firmware mt6771
[03:03:35] Remove the smart card gently clean the surface,replace it back, reboot ur PC and insert your dongle
[02:59:43] Itel A509w/cm2 spsp2 connected but it\'s saying server error.
Then I connected my PC to internet,l repeat the operation it was successful
[01:54:16] Hi
InfinityBoxTalks 2022-07-08
[23:50:00] Post problem HERE\r
Another way is send e-mail to support
[23:50:00] Cm2 dongle not connected not showing led lights
[23:04:30] Help
[22:23:38] Https://binarybitpay.com
[22:10:35] Las ganancias están garantizadas sin demora. Únete ahora
👇👇👇
https://tinyurl.com/2p9cw6hj
[22:03:24] No hay estafa aquí. Son legítimos y confiables. Únete ahora y comienza a ganar..
👇👇
https://is.gd/UIbaWq
[21:51:18] Invierta aquí y obtenga buenas ganancias sin demora.
👇👇👇
Binarybitpay.com
[21:14:56] But why when I open cm2mt2 is not opening up????
[20:48:38] That might be a payjoy device
[20:34:46] Koi kar sakta he kya dead boot repair. Parsnal msg kare
[20:34:25] Vivo unlocktool se dead ho gaya he
[20:22:33] Maybe infinity data explorer can do that.
[19:58:37] please
[19:58:30] ADN FRP
[19:58:20] hi
tecno pova neo LE6H
loader format
[19:32:16] your smartcard is having latest firmware version
[18:40:32] здравствуйте вопросик есть нокия та1116 упала в qualcomm best 2 может поднять?
[18:36:50] I renew my dongle day and I updated on my laptop but when I want to update on my computer this massage come 👆👆👆
[17:54:10] Cm2 firmware dongle. 136.2
Can use cm2 sp2?
[17:49:26] Easy buy on Infinix s5pro any permanent solution on it please help
[17:10:52] Gionee S10 lite IMEI repair please
[17:04:08] Please I wish to ask how one can remove password in spd with data safe(no lost of data) in A56(w6004)
[17:03:07] Please I wish to ask how one can remove password in spd with data safe(no lost of data)
[15:00:55] Pls what can I do
[15:00:32] Each time I try to backup mtk files this is what I see and the backup file will not be seen by cm2.
[14:59:19] Pls I need help with this error
[13:52:51] Hi Job not done but take credit
[13:52:43] who has CM2 smart card driver
[13:37:28] Thanks
[13:37:24] Ok
[13:33:42] Input correctly your username and password in settings field properly
[13:16:45] Pr652b
[12:39:16] Hot10i frb
[12:38:37] Whats fix
[12:34:05] Sir nokia c10 network unlocked after mobile on
[12:25:23] Guyz plz I need 🙏 tecno lc7 nvram file
[11:42:17] Please help for nvram tecno kb7j
[11:40:34] A message was on the screen
[11:37:48] Itel a509w ,can it go on empty flash,
[11:33:27] Spd but stuck while flashing
[11:33:09] Hi team plis send UK.OFF file helps faster than dongle manager
[11:21:26] NVRam corrupt download the full file and flash it
[11:10:27] I also have to sell
[10:18:53] Solution plz
[10:00:55] If mtk chipset use cm2mt2 and if spd chipset use cm2sp2
[09:40:12] Without losing more credit😍
[09:39:05] Jio itel unlock Done with cm2
[09:38:14] Done Thanks to infinity cm2
[09:38:03] Sorry but stop selling ur service again and again let cm2 support answer it thanks
[09:37:01] Use mi cloud rom
[09:36:00] Also is there any fix for relock on mtk devices... Like it\'s there in UnlockTool... I m sorry that m comparing
[09:35:46] I got Z3x Samsung tool pro
[09:35:02] No
[09:34:46] No
[09:34:25] hardware modification maybe need
[09:33:34] Sar is there anyway to fix dual imei of note 8 pro.... I only fix imei 2.. if I write backup of different device can I fix for this device?
[09:33:16] Can cm2 do that?
[09:31:24] Repair without root
[09:22:06] Need
M022G U3 WORKING ROOT FILE PLEASE
M022GXXS3BVB2
[09:01:48] Please help am trying to unlock Nokia TA 1264 network lock am getting this error
[08:52:22] Which module can unlock this?
[08:05:47] still waitting for hlp
[07:57:10] invens max1
[07:56:11] SafeFormat Fail : Unknown vendor!
safe format supported vendor is oppo/realme/vivo
[07:54:09] Operation : Reset Settings/Format FS [ v2.34 ]
Mode : SMART RESET DATA SAFE
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM26)
MODE : PRELOADER PORT
PORT : 26
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BRO
[07:51:40] always send complete logs
[07:51:34] Identify logs
[07:51:05] NAND : 000000000000000000000000
eMMC : OK
eMMC : 51000115415358387BDB06420FC145DE
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info
EMMC: CID : 15010051385853414206DB7BDE45C10F
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 513858534142 : PRV : 0x06
EMMC: VEN : SAMSUNG : Q8XSAB
EMMC: SNN : 3682328133 ( 0xDB7BDE45 ) , MF : 12/2014
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
[07:50:45] Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!
Reconnect Power/Cable!
so which way ca i do
[07:03:46] Iasked about flashing itel A661w (a58) flashing but no answer?
[06:44:59] if show completed then repeat unlock
[06:44:54] and check status
[06:44:50] login your IOS
[06:27:52] 👆
[06:26:43] Can you read? Soft log need
[06:25:54] Solution please
[06:25:42] 100 infinity credit price!?
[06:13:27] You just need to purchase a cm2 license on your infinity best dongle
InfinityBoxTalks 2022-07-07
[22:33:08] Corrupted emmc
[21:39:11] Help me out I know why to see it
[21:37:19] remove USB filter
[21:35:41] Downgrade your windows boss
[21:31:16] Solution please anytime am using cm2
[21:23:42] Probabl reading mvrm tecno KG5K nvrm
[20:24:01] Hello dear sir I hope you are doing well please think about for Nokia frp and flashing ....some of peoples the make new service of hmd after few days running away so please think about to add more service thanks 🙏
[20:23:50] Hello dear sir I hope you are doing well please think about for Nokia frp and flashing ....some of peoples the make new service of hmd after few days running away so please think about to add more service thanks 🙏
[20:23:41] Hello dear sir I hope you are doing well please think about for Nokia frp and flashing ....some of peoples the make new service of hmd after few days running away so please think about to add more service thanks 🙏
[20:23:33] Hello dear sir I hope you are doing well please think about for Nokia frp and flashing ....some of peoples the make new service of hmd after few days running away so please think about to add more service thanks 🙏
[20:23:24] Hello dear sir I hope you are doing well please think about for Nokia frp and flashing ....some of peoples the make new service of hmd after few days running away so please think about to add more service thanks 🙏
[20:21:03] Hello dear sir I hope you are doing well please think about for Nokia frp and flashing ....some of peoples the make new service of hmd after few days running away so please think about to add more service thanks 🙏
[20:18:40] What is the problem
[19:49:08] What to do ...flashed it but still
[19:39:17] Phone problem?
[19:37:29] Qualcomm SDM429 Snapdragon 429 Android 9
[19:20:30] 𝘽𝙞𝙣𝙖𝙧𝙮?
[19:18:48] Hello cm2 help me help me. Nvram tecno KG5K please 🥺
[17:11:18] i need downgrade file for samsung note9 android 9 version
[16:52:47] Logs?
[16:52:28] Jio itel L5006C credit 5 gone but unlock failed solution?
[16:45:29] I have this tablet xtouch
[16:45:29] How are you?
[16:45:28] Hi brothers
[16:12:58] Itel p36 pro Google account reset please
[16:05:06] ,,,!,!??.?
[15:46:14] Use mt2
[14:59:17] Plz help how to remove frp on tecno kG6 with cm2
[14:17:16] Trying to identify Tecno pop 5 BD3
[14:16:10] How to solve this problem
[14:15:30] 👆👆👆👆Anyone
[14:04:14] Nokia- ta1111 network unlock is supported by cm2
[13:34:32] No
[13:25:54] Samsung T295 kg lock, can cm2 work on it
[13:13:20] xiami redmi not 8 2021 imei chnge
[13:10:00] سلام
[13:04:31] Sc9863a
[13:03:29] Ta-1369
Format suport?
[12:28:18] help me nokia 2.3 flash file please
[11:52:45] KG5K unable to backup nvram and readback FW
[11:44:43] how can convert infinity best to cm2
[11:16:25] every time i open CM2SP2 i get this 😏
[10:59:24] No it doesn\'t re... If u don\'t know what m talking about don\'t reply untill u understand
[10:58:49] YES, But will relock after WI-FI CONNECT
[10:57:28] It does without server... It disable like it happens in qcom
[10:57:04] SERVER
[10:56:38] ALWAYS RELOCK..
[10:56:22] Relock
[10:56:17] Lost
[10:56:00] CLEAN OR LOST
[10:55:42] There is a option in UnlockTool m just searching for similar step to cm2
[10:55:14] 10s
[10:55:02] 😂😂
[10:54:50] MODEL BRO?
[10:54:32] VodaCom Vibe 3G, Firmware Needed.
[10:53:31] It stops there?
[10:48:46] Stuck at prepare target,itel p38 any solution of file?
[10:30:21] Ok
[10:12:30] Try clean smart card and re open
[10:07:42] Hello... today when I try to open CM2SP2 AND CM2MT2 it only writes this
[09:33:15] Ok will see
[09:32:14] maybe nothing will come of it. try to read userdata and open 7zip. lucky - good.
[09:32:00] phonedoesnthavepassword tho
[09:31:44] File pls help me
[09:31:26] Spark 7 pr651
[09:31:25] iknow i just said
[09:31:07] USERDATA : FILESYSTEM : EXT4 with FBE ( File-Base Encryption )
[09:30:40] PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM131)
MODE : PRELOADER PORT
PORT : 131
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_
[09:30:37] provided that the support is extended
[09:29:33] Download dongle manager and update
[09:29:05] Log identify
[09:28:33] Repeat operation, enable firefly too
[09:28:25] Realme 3
[09:28:08] Model
[09:27:58] What do u mean
[09:27:41] perhaps a complete memory image
[09:27:39] The phone is at read-only state and won\'t stay on for even few sec then restart... There is no password on the phone do u have any idea to take backup of gallary
[09:26:23] I doubt.
[09:25:05] Quick question if I backup backup userdata partition and put it back after emmc repair will data be intact...
[08:55:05] Spd cpu?
[08:54:53] Update support.
[08:47:58] Suport For Unlock
[08:47:49] Nokia C21=
Models TA-1356, TA-1352
[08:47:28] How do I solve this??
[08:41:45] Choose another loader bro
[08:39:13] Somebody help me nvram tecno ke5
[08:38:48] Getting errors about emi
[08:36:11] Failed still
[08:33:44] Repeat operation now bro
[08:33:21] How can i fix this
[08:22:21] You just need to tell me how to do it
[08:21:51] WHAT
[08:14:23] If have credits already..send me team viewer id
[08:13:50] i want to know how
[08:13:12] Ok
[08:12:47] I can use br o
[08:12:20] And use
[08:12:18] Buy credits
[08:11:55] yes bro
[08:11:11] You have cm2?
Buy cm2 5credits
Do unlock
[08:09:25] how to operate
[08:09:14] Tecno f3 -h8022ac-n-190801v176 file any one with it
[08:07:50] Use cm2 5credits
[07:52:15] Spd
[07:51:12] SC bro
[07:31:39] Chip type?
[07:26:54] who has the firmware for ture smart 4g p1 sim unlock help me
[07:25:42] Chipset?
[07:05:19] https://infinity-box.com/contact/
[07:02:18] please i need the mail that i will comtact
[07:00:07] Contact to suppost via e-mail,. Or forum. Link
[06:57:38] SOLUTION GAVE YOU AND I ASKED YOU IN 2 HOURS WAIT YOU STARTED SENDING SHIT MESSAGES TILL ON MY GROUP SO YOU WANTED ME TO GIVE YOU COMFORT AND STAY LOOKING AT YOU
[06:56:12] @deanwhisley2
SEND PROOF THAT YOU WAS SCAMMED STOP SAYING WRONG THINGS I REMOVED YOU AFTER YOU STARTED GIVING ME SHIT.CANT DEAL WITH PEOPLE GIVING ME SHIT.STILL THE SOLUTION I GAVE YOU SO STOP EMBARACING YOUR SELF I AM SENDING PROOFS HERE SO PEOPLE SEE WHO YOU ARE
[06:55:36] Juu
[06:40:24] also when i try update the dongle this what i get
[06:39:42] how can i fix is
[06:38:35] This is not my troubles)).
[06:37:02] please i dont understand
[06:08:30] Good morning here. Please how to connect Nokia 3.1 ta-1140 for network unlocking
[06:03:19] Please how can I solve this..
DA: SYNC with DA failed.
[05:07:10] https://infinity-box.com/price/ price here. https://infinity-box.com/buy/ how to by here. Choose seller and contact him
[04:14:54] X608
[04:09:59] Infinity West renewal tools charge
[03:51:27] Found 33 files s15, search limit is 20 files per server
1. Dexp_NVM_Dexp_BS150_MT6580_0D766072137E4B8CCE3C10BCFC4EB563
2. Leagoo_NVM_leagoo_elie1_MT6735_S00_X5601_A1_LWG_MP_V0_5_3_S151222_1_lwg_n_eMMC
3. Doogee_Doogee_DG750_6GB_S555_DG_A29_KK_V0.14.2_S150317
4.
[03:51:16] Nothing found for itel s15
If you will get the file upload it to support with iosFileUploader
[03:50:46] Itel s15 file needed
[03:50:05] Infinity recharge Kitna Ka Hota Hai
[03:19:38] Spsp or mt2?
[01:57:38] who shares it
[01:56:40] flash j190EQ pac
InfinityBoxTalks 2022-07-06
[21:37:17] Itel s15 hang on logo file for it
[21:35:09] Am facing EMi error while try to flash phone any solution pls
[21:12:55] What is this error mean pls .. while try to flash
[20:07:09] I refer to cm2 sorry
[19:55:30] ?
[19:37:48] Make this https://infinity-box.com/?r=100155
[19:37:48] Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Box/Dongle misconfiguration
Diagnostic code: 70
06-07-2022 12:27:11
Username:
==> Scan C:\\Users\\Inspiron 11\\Downloads\\DongleManager\\ for report.log
==> Scan c:\\Program Files\\ for report.log
==> Scan c:\\Program Files (x86)\\ for report.log
Found files: 0
==> Scan C:\\Users\\Inspiron 11\\Downloads\\DongleManager\\ for *.ibin.log
==> Scan c:\\Program Files\\ for *.ibin.log
==> Scan c:\\Program Files (x86)\\ for *.ibin.log
Found files: 0
==> Scan C:\\Users\\Inspiron 11\\Do
[19:22:59] or https://forum.infinity-box.com/viewforum.php?f=3 here
[19:21:37] https://forum.gsmhosting.com/vbb/f296/smart-card-dongle-box-update-fixes-solutions-2981742/index18.html write here/
[19:17:22] When I also try to upgrade this what I get
[19:11:56] Not work
[19:09:12] Ok sir
[19:07:02] I need help pls
[19:03:12] Please I have issues with my dongle
[19:02:17] Hi
[18:47:50] not at all
[18:47:42] thanks
[18:47:36] okay
[18:47:25] change eMMC chip
[18:46:10] any solution to that
[18:45:33] STORAGE : Life Status : eMMC : BAD! LIFE CYCLE END! READ-ONLY
[18:45:07] STORAGE : Life Status : eMMC : BAD! LIFE CYCLE END! READ-ONLY STATE!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB KEY NOT PROGRAMMED [USABLE]
Done!
Elapsed: 00:00:49
[18:45:07] Card found : ACB81790 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Socket Error # 11001
Host not found.
Load IDBase v312457 Ok!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
[18:43:38] DA, it is not correct, use another and preloader, it worked for me with my drivers
[18:36:04] Identify
[18:35:33] Identify???
[18:32:43] Any solution pls
[17:48:45] Okay bro
I will tommorow
[17:48:19] This is note unlock. Post soft log in this chat
[17:47:39] After identify what do i do
[17:47:29] Thanks
[17:47:22] Okay bro I\'ll let you know tomorrow
[17:46:17] Itel p38 pac firmware needed free download
[17:45:59] What is shift button
[17:45:26] make identify with left shift button pressed
[17:16:42] Y5 2018 network unlock by cm2?
[16:44:06] https://dl1.infinity-box.com/00/pub/?dir=soc-drivers/&uid=19180&file=Drivers_QcomMtk_3.0.7.7z run this as admin. Then reboot pc
[16:42:28] Of moto e6s is mtk
[16:42:20] I need help with the drivers
[16:41:36] Nothing found for s rm-561
If you will get the file upload it to support with iosFileUploader
[16:24:26] This is my username
[15:26:31] You need to connect your system to network after that launch your SPD2 then select the model then identify the phone first after that do what you want to do either frp or reset
[15:06:55] How do i rest my dongle password, i can\'t login for download
[15:05:15] huawei y5 2018 sim lock support
[14:44:26] Like frp moto e6s is mtk
[14:36:38] Yes
[14:34:56] Ask for code?
[14:33:47] how do i login, ve been using it before
[14:26:02] am unable to login to download
[14:14:02] Nokia 1.4 network unlock(Qualcomm)
[14:05:18] Software break try to \"smart reset or forced full factory+frp\".
[13:49:03] Infinix x625 keep rebooting after try to write IMEI
[13:20:30] Help me with Gionee V188S NVRAM file
[13:19:33] Oppo F15 CPh2001
After Rest Settings/Format FS CM2MTK2
What happan and what i do to fixit
[13:17:56] you have to renew the Infinity online access and then put both username and password correctly in the Infinity software settings
[13:15:30] puts it in log, failure to start brom Mode protocol, depending on model, Android version, security patch, you have to force boot, either by test point or by pressing the volume keys
[13:14:41] Please let me get help
[13:02:09] Done ✅
[12:15:44] How to remover FRP iTel A661W Pleass
[11:49:45] Adb not working
[11:39:37] Bypass
[11:28:21] Test point not working
[11:28:08] A037f kg lock
[11:25:06] model?
[11:24:36] https://forum.gsmhosting.com/vbb/f296/nokia-c21-network-unlock-not-work-3025836/#post14579627
[11:22:20] Please help me fix this error thanks in advance🙏🙏
[11:07:48] Hi cm2 help nvram tecno KG5K only 🤲🤲🤲🤲
[11:04:10] Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash
[11:04:10] Operation : Flash [ v1.58 ]
======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Sel
[10:55:43] Please help me nvram tecno KG5K
[10:34:36] itel a52s emi auth
[10:29:40] if I give back
[10:28:50] Test point, use mt2
[10:26:25] a013g kg
[10:26:17] I have tried bt it\'s not connecting either
[10:06:22] Prosess follow done ✅ but same issue
[10:03:38] Ok will try
[10:01:24] 005C203D37
[10:01:10] check order Order/Transaction ID: 1023442/1323070
Date: 2022-07-06 09:39:43
[09:55:56] Fix your PC https://infinity-box.com/?r=100103
[09:54:38] Fix your PC https://infinity-box.com/?r=100103
[09:54:18] No error
[09:54:06] any error message text?
[09:53:42] Latest setup not working but old setup successful work
[09:52:46] Photo from Kapil Mobile Point Csc
[09:49:37] It was renewed and updated well 3 days ago
What is the problem?
[09:47:40] Cm2 dongal Successful renew done but not working please check and resolve ..cm2 team
[09:27:27] How can I erase RPMB on Nokia 2.3 using cm2 and where is the file located
[09:25:13] Help me Cm2SPD2
[09:23:16] Check it application here www.infinity-box.com
[09:13:08] What\'s so special about this activation?
[09:11:50] You need to purchase an activation for this service on your dongle
[09:11:44] 🙏Let me check
[09:11:05] Try cm2mt2 bro
[09:11:03] ?
[09:07:56] Cm2 dongle support this vfd tab model 1100
[08:44:38] Flashing it full file
[08:32:24] Itel a58 stuck here while flashing?
[07:51:33] Nokia ta-1380 need to unlock
[07:38:58] I want to factory set
[07:35:36] P651w itel p37 help please
[07:21:14] hello, please someone can give me the flash tool of LG
[07:20:23] 2.4 mdm done by cm2+file😁👍
[07:05:33] done
[07:05:29] Device Connected!
BootVersion : SPRD3
Boot : INF : iTel : S661L_Vision-3
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!
Boot D
[07:05:29] Reset password or e-mail HERE\r
\r
Apply username and password this way
[07:05:29] Card found : 2417E96E , v0149
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13
Load IDBase v8331 Ok!
Operation : Format FS / Reset Settings [ v2.13 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : iTel : S661L_Vision-3
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion :
[06:38:00] Unlocktool 🔥🔥🔥
[06:28:42] no work
[06:25:45] help me
[06:25:36] Reset password or e-mail HERE\r
\r
Apply username and password this way
[06:25:36] Server Error : Access denied: {\"Message\":\"Access denied 002417E96E product 908 declined or wrong password\"}
>>> ERROR : Server process failed!
>>> ERROR : FLASH FDL AUTHENTIFICATION FAILED!
[05:14:27] Nothing found for tecno bd4j
If you will get the file upload it to support with iosFileUploader
[05:14:12] Nothing found for tecno bd4h
If you will get the file upload it to support with iosFileUploader
[05:13:39] I mean only old version are opening
[05:13:15] Only version are opening
[05:10:38] Hello sirs, help this issue after installing cm2mt2 v2.34 in Windows 7 when I open is just showing the CM2 logo after then the program is not coming at all
[05:10:31] ok sirr
[05:10:17] Hello sirs, help this issue after installing cm2mt2 v2.34 in Windows 7 when I open is just showing the CM2 logo after then the program is not coming at all
[05:10:12] #CM2SP2 connection issue solution is HERE
[05:10:12] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : iTel : L6006-SU385_A48
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!
[05:09:44] itel a48 not booting. need tto be removed frp
[04:22:34] No need root
[04:21:43] Yes
[04:08:03] cm2
[04:05:16] yes use credit
[02:21:34] hello
[01:55:55] Help!
[01:55:41] My Infinity CM2 MT2 after upgrade cannot open, asks for upgrade from main module even though I have upgraded it.
[01:45:07] ❌
InfinityBoxTalks 2022-07-05
[23:49:57] Simple serial no. is username some dongles Starr with 00 and others start with 03
[23:26:25] 👋
[22:53:25] Cm2 support Huawei ldn-l21 y7 2018 prime
[22:11:29] Done
[20:10:35] Is there a solution to getting the license file?
For some reason I can\'t get in anymore. Hotmail
[19:54:38] tecno kg7h imei repair
[19:37:07] Help me
[17:41:01] Okay
[17:14:41] Full flashing needed
[17:11:52] samsung s6 keep network searching
any advice
[17:06:14] Regards
[17:00:44] https://infinity-box.com/?r=34
[17:00:44] Use latest dongle manager do report and fix
[16:59:25] Octoplus frp tool
[16:56:33] hello infinity support i have other problem again when i start infinity best2 software a file that name is fault.bin make in best 2 directory and software not run
Please help me
[16:52:40] Nokia 1313 password remove solution
[16:44:33] Okay thank u sir
[16:44:09] Backup from a working device and flash to yours
[16:43:48] repair the 2 imei redmi 9a you can with the tool
[16:42:34] Yes with firmware
[16:41:33] Did you flash
[16:41:23] lcd not compatib
[16:40:36] Any solution plz
[16:32:17] Need root file
[16:31:49] Hello dears how to resolve samsung A125fz u2 imei
[16:30:05] Operation : Reset Settings/Format FS [ v2.34 ]
Mode : FRP [ RESET PROTECTION ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2CA33D3F3289144833CC722BA
[14:50:55] Nothing found for Tecno BE6
If you will get the file upload it to support with iosFileUploader
[14:46:24] Link to download it?
[14:27:38] I just need that, enable diag port
[14:27:22] Hi, how do I activate diag port with Infinity for a Nokia c01 plus
[14:13:23] Sar is there any option to disable micloud... It\'s relocks
[14:09:20] 👌🏾new FW
[14:08:54] can cm2 unlock nokia c5
[14:08:39] skip frp samsung A73
[13:51:24] Hi, need help. I have tablet XTOUCH. HOW TO REMOVE PIN LOCK?
[13:44:00] What can be the solution?
[13:11:15] Pls someone should help me with Gionee s10L Da file
[12:53:02] no
[12:37:08] Motorola 3rd generation
[12:14:26] 10000000000000%%%%%%%
[12:08:48] Username and password I have entered correctly also
[12:07:02] Nokia ta-1352 network lock .. coming this error. I have bought credit alright
[11:56:14] Any solution to wipe this off
[11:54:50] Any help About easy buy phones
[11:50:36] #CM2SP2 connection issue solution is HERE
[11:50:36] Operation : Identify [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : INKOSI-user 11 RP1A.201005.001 18632 release-keys
MemoryInfo : EMMC : 16 GB ; DRAM : 1 GB
Platform Version: MOCORTM_17C_W21.14.6_Debug
Project
[11:21:17] OPPO A15S FULL DEAD RECOVER WITH CM2 https://youtu.be/stBGHVB7DvI
[11:15:47] Vivo V15 (PD1831F) RPMB File Need.
[11:15:27] Hope your dongle not ban
[11:14:40] why i try to renew
[11:14:23] Why is serial Rejected {ED1DCCAD}
[10:58:39] hi sir vivo 1915 y19 please help to remove frp
[10:55:17] unlock it permanent
[10:33:31] #CM2MT2 connection issue solution is HERE
[10:33:31] Operation : Identify [ v2.32 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
Device not found!
>>> Check cable, battery, connection and drivers!
Reconnect Power/Cable!
Operation : Identify [ v2.32 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : Miracle PreLoader USB VCOM (Androi
[10:30:30] I too failed many times both diag a well as flash c2 second edition,doesn’t work
[10:26:53] Redmi 9 screen lock with out losses data
[10:21:17] vivo y19 how to remove frp sir?
[10:05:30] This is not A12
[09:49:26] See
[09:48:34] Show interface
[09:45:01] Ooh sorry cm2mt2
[09:44:56] Or cm2mt2
[09:44:26] Cm2sp2
[09:44:11] Which setup used?
[09:42:57] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 466CD127A8A8EE95C171AC6E8C470C01
BROM : SecLevel : 0x000000E5
[09:42:49] Coming👇
[09:42:07] Paste error log here
[09:41:40] Not responding at all
[09:41:24] Use default setup bro
[09:40:47] Hi all i really need A022F preloader please
[09:30:55] Type: Infinity-Box/Dongle [CM2]
S/N: ED1DCCAD
Username: 00ED1DCCAD
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0153; Expired: 09-Mar-2022
Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years
How to check support period
[09:27:49] the S/N Was rejected
[09:24:17] ED1DCCAD
[08:54:03] Can I activate UMT EMMC/HST on my NCK pro dongle using infinity server?
[08:31:39] Qualcomm android 10
[08:31:25] Chipset?
[08:31:03] Any one can unlock Alcatel 5062w ( REVVL4+) T- MOBILE
[08:01:57] 62order failure can someone help me for this plz
[07:59:35] Hi everyone
[07:54:33] We need IMEI repair service on this model support for repair
[07:35:56] tnx bro
[07:34:14] Stop cloning imei bro use original 👌
[07:26:55] original imei work but after change other imei not work
[07:25:12] return original imei back
[07:24:04] It means it cannot be changed?
[07:24:02] read all answers
[07:23:33] I mean the only valid usernames arehere https://infinity-box.com/service/
usernames like \"user518\" or \"verysmartunlock\" or \"babu-the-great\" are not allowed for unlock services.
[07:22:08] 🤣🤣🤣 can\'t be done bro if imei not same 👌
[07:20:13] bro changed imei
[07:19:58] In any case, my problem is solved and I thank you for your support❤️❤️
[07:18:56] Bro check imei under settings and other at device back , were they same?
[07:18:55] Thanks for your advice, the file you mentioned was never in my computer folder and I have not deleted any files.I saw my Windows backup, which is an image file, but there was no such file in it
[07:18:04] but lock
[07:15:10] Says device not locked !
[07:14:06] Serial number or iOS username
[07:11:34] Regards sir i have not any file fult bin in my infinity folder yhis probkem solve now but i havent fult ini file in my computer
[07:09:46] I think add c1 2nd very hard because Nokia even patch diag mode for old devices such as c1 old c10 c20 c30
[07:04:10] Hello good morning all brothers please any solution of Nokia c1 second generation network unlock?
[07:03:42] Maybe cm2 add new service unlock with imei
[07:03:21] Yes I have sand photo for software and phone software security but unfortunately cm2 reply try boot mode and c10 c20 don\'t have loader they won\'t boot
[07:02:49] Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : Blade-A31
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
NVMng : SecurityInfo
IMEI[1] : 3510xxxxxxxxxxxx
IMEI[2] : 3513xxxxxxxxxxxx
IMEI[3] : 8674000203
[06:57:37] The one that pops up in dongle manager
[06:57:23] Provided by infinity
[06:57:07] I think they mean the username
[06:56:56] Meaning that, you needed to provide your dongle unique ID which is your dongle Seria Number to desired reseller if you\'re in need of CM2 Server log credit or CM2 Dongle Activation 👌
[06:56:43] South Africa has lots of Nokia phones released all the times with network lock and App lock
[06:54:25] Yah for sure 😂😂😂
[06:54:03] It wil supprise u😂😂
[06:53:44] Ok
[06:53:27] No bro i think u havent come accross new security
[06:52:46] Nokia C20 C10 C30 no problem on diag mode when it comes to network unocking but no C1 2nd TA 1380 not supported yet
[06:50:45] Usb drive problem bro.
[06:50:34] What do you mean here?
[06:50:03] Hold both volumes??
[06:49:54] Ok
[06:49:41] try flash mode and post sw log TEXT
[06:49:26] Try and post sw log text
[06:49:22] I have 2 C20 phones here diag mode totally doesnt work
[06:49:08] Dear Sirs,
If you want to buy credits you must provide to seller your Infinity Username otherwise you will be unable to use credits for direct unlock.
[06:48:37] Yes, I flashed with another firmware and it worked thanks
[06:48:34] Seems new Nokias spd diag mode disabled
[06:47:58] How to fix?
[06:47:38] No.
[06:39:10] Is Nokia C20 now supported via flash mode???
[06:37:29] Nokia c20 won\'t boot flash mode not have loader
[06:36:25] That\'s all software show,
Waiting for device and then phone power on, that\'s it
[06:36:25] un-check DiagMode
[06:33:57] ?
[06:31:32] G
[06:20:55] A325F Android 12, Test Point Doesn\'t Work.
[06:20:09] Mtk
[06:20:07] A037f
[06:19:59] Help me
[06:19:50] #CM2MT2 connection issue solution is HERE
[06:19:50] Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
Device not found!
>>> Check cable, battery, connection and drivers!
Reconnect Power/Cable!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
[06:11:36] Have you tried to reset or flash?
[06:09:33] copy/paste sw log text
[06:09:11] Ok
[06:06:30] you are using CM2MTK v1.58
use another model selection or loaders for your phone or try with CM2MT2
do not post selfies but copy/paste sw log text instead!
[06:01:55] Found 1 file a661w
1. DA_SPD_USC_iTel_iTel_A58_A661W.fdl
[06:00:47] use built-in loaders, it works
in case of problem use FDL files for a661w
#CM2SP2 #FDL[1] and FDL[2] loaders
https://forum.infinity-box.com/viewtopic.php?t=5369
[05:59:09] Thanks
[05:58:26] Yes
[05:58:20] Credit and activation server available sir
[05:57:22] to buy credits just contact to any seller and send to seller your Infinity Username https://infinity-box.com/service/
[05:56:35] Hi friend,
How to activate https://infinity-box.com/support/?s=6
[05:55:53] Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[05:54:53] Send your Infinity username to seller https://infinity-box.com/buy/\r
How to know username https://infinity-box.com/service/
[05:54:53] Hi everybody, can someone send a video here illustrating how to buy credit and active cm2 dongle please.
[05:54:23] test-point should be Ok
[05:53:53] Copy/paste sw log text
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[05:51:57] \"Good\" is Unlock Tool logs:
[BROM] ERASE FRP LibUSB driver is not installed!
Initializing usb... OK
Waiting for device... COM9 [BOOTROM:0E8D:0003]
Bypassing authentication... OK
Analyzing preloader... preloader_k85v1_64.bin [MT6875/6781:5:912] [Internal]
Handshaking... OK
Reading hardware info... OK
Hardware : MT6785 [Helio G90|G90T|G95] 0813 8A00 CA00 0000
Security Config : SCB SLA DAA
MEID : D60F41F36524301BDA0D2824DCA3EBA5
Sending Download-Agent... OK
Syncing with target... OK
Booting device... O
[05:51:55] run Infinity CM2MT2.exe
[05:51:27] No good, sir
[05:50:15] What is your dongle S/N?
[05:48:54] Official Infinity web page with files https://infinity-box.com/support/
[05:48:30] Official Infinity web page with files https://infinity-box.com/support/
[05:47:15] Click here https://infinity-box.com/support/
You will see Download Software and Updates button
[05:45:46] Good!
[05:44:49] What is this phone CPU type?
[05:43:46] Operation : Reset Settings/Format FS [ v2.32 ]
Mode : FRP [ RESET PROTECTION ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Krug
TYPE : MODERN [RAPHAEL]
BROM : MEID : D87F4FAA4CDDF9D86BB8B
[05:42:41] We will be waiting for it
[05:42:12] Found 3 files realme 3 nvram
1. Oppo_Realme_NVM_CPH1729_MT6763_eMMC_nvram
2. Oppo_Realme_NVM_Oppo_F5CPH_1723_nvram
3. Oppo_Realme_NVM_Oppo_Reno_2_MT6779_A79E35492488070F07020922E6AA8A35_nvram
[05:41:58] Hi friend,
What is the problem with it?
[05:41:43] select another model or loaders.
try with built-in loaders, it works in most cases
also see examples here https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/
[05:40:20] Double check drivers
[05:38:47] copy/paste sw log text
[05:38:22] Here is it https://infinity-box.com/support/
[05:37:24] Do not delete fault.bin file!
[05:37:05] What is the model name and cpu type?
[05:36:44] Of course
[05:35:04] post link here
[05:34:20] where is sw log text?
[05:33:44] smart reset makes reset for for specific memory areas and values only.
try it with your phone and see result.
If you do ot want to try you can make search here https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/
[05:31:44] I see nothing, plz copy/paste software log text
[05:30:12] In some cases need to use CM2SCR or CM2SPD software module.
We are trying to make a database per models here https://infinity-box.com/
Click to brand and see model and software module name
[05:27:35] Топик сделайте отдельный на каком-нибудь форуме.
Вы же умный и опытный человек и прекрасно понимаете, что искать посты прошлогодние очень сложно. Да, понимаете?
[05:20:22] In future do not delete fault.bin file but just make Report&Fix right after the issue comes.
To avoid software conflicts in future please do not use [b]HDD Software|Hex Editor Neo|Hexframe[/b] at the same time with Infinity software.
[b]What to do:[/b]
Update dongle firmware with [url=https://infinity-box.com/?r=34][b]Infinity DongleManager[/b][/url] now to get it fixed
[05:17:57] #CM2SP2 connection issue solution is HERE
[05:17:57] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Sedning Init Boot ...
ERROR : FDL Start Failed!
Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!
Reconnect Power/Cable!
[05:17:54] Hello dear I have try but show this proble help me please fined solution
[04:41:51] Some body help me please....
[04:36:05] Admin are sure with those feature phones that were added to CM2SP2? I tried several phones until I used CM2SCR
[03:35:09] Go to settings >about phone >software information snap and send pics bro
[01:15:30] How
InfinityBoxTalks 2022-07-04
[23:57:11] Help please,what could actually be the problem
[22:32:36] Yes
[22:29:32] Any help 👆👆👆👆👆
[22:19:58] What is that is Smart reset? How to find out what you need to use it for this model (redmi note 10s)
[22:14:53] Log has been posted before also
[22:12:59] This problem has been before
[22:12:48] Hi,
copy/paste sw log text
[22:08:18] Hi all. This bug today\'s I see on cm2mtk2 tool
[22:07:31] Frp does not remove redmi note 10s. Writes a log that has been removed , but the phone continues to request it
[21:08:27] No Permanent
[21:08:07] Funny
[20:53:55] Yes after resetting the phone it’s still pop up phone lock after connecting it the phone to the internet
[20:52:21] did you try to reset it
[20:51:19] The factors setting is always locked 🔒
[20:50:49] Easy buy phone
[20:50:47] explain about it
[20:50:30] what does it mean?
[20:49:20] ????
[20:48:41] How can i solve this problem please help me
[20:48:07] 04-07-2022 23:09:23
Username: 03A6641A91
==> Scan D:\\New folder\\DongleManager\\ for report.log
==> Scan c:\\InfinityBox\\ for report.log
==> Scan c:\\Program Files\\ for report.log
==> Scan d:\\Program Files\\ for report.log
==> Scan c:\\Program Files (x86)\\ for report.log
Found files: 0
==> Scan D:\\New folder\\DongleManager\\ for *.ibin.log
==> Scan c:\\InfinityBox\\ for *.ibin.log
==> Scan c:\\Program Files\\ for *.ibin.log
==> Scan d:\\Program Files\\ for *.ibin.log
==> Scan c:\\Program Files (x86)\\ for *.ibin.log
Found
[20:46:43] Make this https://infinity-box.com/?r=100155
[20:46:42] === DongleManager [Infinity] v1.91 [04/07/2022 11:14:39 È.Ù] ===
Searching...
Card-Reader: Generic USB Smart Card Reader 0
HWID: 00011A91212B4082
Box/Dongle found: Infinity [BEST]
Serial No (S/N): A6641A91
Firmware version: 0122.02
Box/Dongle misconfiguration
Diagnostic code: 5A
\"UK Edition\" status: On
Last launched Application: 0031 v.0122
=> Activations:
- 03: Infinity [BEST] v0122
Diagnostic key: 7FEE89E4DE840DAD
=> Options:
- Infinity [BEST]
[20:45:19] 😢
[20:45:16] Sorry
[20:45:02] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[20:45:02] Inbox
[20:41:00] web to download please?
[20:38:56] 😂😂😂😂
[20:37:17] Any solution for easy buy phone ?
[20:30:05] #CM2MT2 connection issue solution is HERE
[20:30:05] Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
Device not found!
>>> Check cable, battery, connection and drivers!
Reconnect Power/Cable!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
[20:29:41] Network unlock
[19:55:54] Nobody here?
[18:46:24] 04-07-2022 23:09:23
Username: 03A6641A91
==> Scan D:\\New folder\\DongleManager\\ for report.log
==> Scan c:\\InfinityBox\\ for report.log
==> Scan c:\\Program Files\\ for report.log
==> Scan d:\\Program Files\\ for report.log
==> Scan c:\\Program Files (x86)\\ for report.log
Found files: 0
==> Scan D:\\New folder\\DongleManager\\ for *.ibin.log
==> Scan c:\\InfinityBox\\ for *.ibin.log
==> Scan c:\\Program Files\\ for *.ibin.log
==> Scan d:\\Program Files\\ for *.ibin.log
==> Scan c:\\Program Files (x86)\\ for *.ibin.log
Found
[18:31:21] Server answer:[0031] Dongle identification data damaged.
[18:30:29] some body help me plz
[18:30:05] can i send my box report info here?
[18:27:20] i do its and dont found fault.bin in folder reports not found
[18:26:00] Make this https://infinity-box.com/?r=100155
[18:26:00] hello dear support i have a problem with infinity best dongle when i have try to open software i see this eror : Dongle misconfiguration please help me regards
[18:18:06] Noted
[17:12:14] The port is ok and I be tried with many cables.
[17:08:35] It doesn\'t connect to cpu at all
[17:06:30] Cm2mtk
[17:04:35] Any help
[17:04:08] Follow the info given on your screen, before that untick the sla botton and retry
[17:03:54] Alguien me puede apoyar con el link de descarga Infinity dongle
[17:03:22] Hola!
[17:01:44] Tty
[16:58:10] Tecno spark 8p
Kg7h
Can\'t identify
Pls help
See error message
[16:57:05] Nokia RM 1035, need to flash but it\'s not connecting trough usb
Any help?
[16:56:14] Tecno spark 8p
[16:55:02] Sorry kg7h
[16:54:41] Spark 8 is KG6 BRO
[16:54:12] Tecno spark 8
[16:50:39] Nokia RM 1035, need to flash but it\'s not connecting trough usb
[16:50:20] Sorry which device is KFGH
[16:32:25] Please help
[16:29:03] Still didn\'t work
[16:26:45] Try will work isa
[16:26:34] Yes
[16:26:27] The phone is techo sir....?
[16:26:00] Select infinix - secure base
[16:25:35] Didn\'t work bro
[16:24:24] Ok
[16:23:51] Uncheck local sla
Connect without buttons
[16:22:45] Tecno spark 8.....kfgh
Can\'t identify
Please help
[16:14:12] HI team infinix x665B FRP help
[16:13:57] Need realme 3 nvram file plz
Rmx1821
[16:04:24] tnx bro
[16:04:14] I will send it to you tomorrow
[16:03:38] Paste error logs here bro
[16:03:17] It didn\'t work, I tested it
[16:02:00] Yes use cm2sp2, then service tab, choose sp unlock
[16:01:52] There is no option to unlock
[16:01:01] How reset frp on mxg-408?
[16:01:00] for spd?
[16:00:47] Cm2 dongle bro
[16:00:03] Any details
[16:00:00] Which box does it support?
[15:59:35] How to unlock
[15:58:48] Yes
[15:58:10] Cm2 only support MTK chipset with brom mode or test point working 👌✅💯
[15:57:11] how to unlock by cm2 ?
[15:57:03] Use cm2mt2 bro
[15:56:46] How to Samsung ao2 kg lock
[15:55:00] BAIXA A VERSAO MAIS RECENTE DO BOOTPACK SP2, E TUDO FICA OKAY
[15:53:03] Use cm2sp2 bro
[15:43:43] Redmi a8...
[15:33:30] spd
[15:32:44] Yes, available
[15:32:01] Chipset?
[15:31:39] Hi?
[15:31:15] Try with cm2mt2 bro
[15:24:27] Connect mobile using TP only?
[15:23:06] By infinity also possible
[15:21:39] Kg
[15:20:34] What do you want to open?
[15:20:22] By cm2
[15:20:08] https://infinity-box.com/?r=15&a=0&fid=13155343
[15:19:59] Is possible unlock using this file in unlocktool?
[15:19:27] A037f
[15:15:15] Wich model??
[15:13:33] Hello boy, i need this file
[15:09:42] Can cm2 Intel support umx-408 frp?
[14:30:51] Sim lock how to unlock Samsung E1105TGSMH
[14:28:48] Network unlock please help
[14:03:29] https://dl3.infinity-box.com/00/pub/?dir=/soc-drivers
[14:02:46] i need link to download mtk drivers
[13:52:46] how to unlock network zte v30
[13:51:58] hi
[13:37:41] Yes
[13:34:03] Any body solution me
[13:33:26] Cm2 updated automatically report issue sulution me
[13:31:26] Cm2 Dos not updated
[13:30:53] wkg lx9 da
[13:29:49] Tecno fl even after flash shows this help
[13:29:22] Hello
[13:26:44] Huawei wkg lx9 frp
[13:16:47] any help hard reset Arrows 801fj model
[12:02:11] 👍
[11:48:59] 100% tested.
[11:48:46] Cm2 file.
[11:48:44] 100% test KG file. No relock
[11:33:31] Ok
[11:32:54] Ok bro wait
[11:32:03] Tecno f1 using cmt mt2 cant load flash file using cm2mtk
da error...help
[11:32:03] Only connecting in preloader mode
[11:31:25] Not working
[11:30:46] What of brom???
[11:29:52] Test point not working
[11:12:40] Hang on Lego
[11:11:50] 🤣😅😂😇
[11:05:30] Somebody help with this
[10:57:15] More than 30mins Executing
[10:38:25] Use infinix platform then model leave that first model , tick both brom and local sla then reconnect device
[10:36:44] some times it reads very well, other times like now its not responding
[10:36:21] nokia g10
[10:36:10] Which device
[10:35:46] untick auto EMI in Setting
[10:35:46] PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 8F3A56EAF8519574E27F5612AF23C1B6
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : FF0BDE71CA047FDBFA68A7AEE4D2D9D90201356E509B2CAA87B4E20FF4E50D13
BROM : SLA : Local Auth
BRO
[10:32:08] Scam alert ⚠️ 📢 if anyone here deals with Michael mobile tech from Tanzania admin of group ( professional technicians) he is a scammer and all people in it won\'t know cause he removes you from group after giving him money for a solution 🙄
[10:31:45] Hi helpe me error boot
[10:14:58] Itel a661wp frp how to do sp2 boot not available?
[10:11:52] Infinity was unlock very good but Nokia patch diag mode with security patch level May 2022
[10:11:12] Mtn south Africa
[09:45:06] unlock what network?
[09:43:25] Infinity quallcomm pls it tooo long
[09:25:55] ok
[09:24:48] Check device USB port or change system port
[09:19:21] Nokia c20 not enter diag mode May 2022 security for unlock?
[09:05:27] Rpmb solution.
[09:03:58] 😁
[09:02:39] .
[09:02:38] Ok
[09:02:35] 😂😂
[08:49:30] Get a good firmware and flash with Cm2
[08:48:46] Yes bro💯💯💯👌✅ if MTK no RELOCK WITH CM2MT2
[08:47:38] Hahaha
[08:47:36] 😂😂😂😂
[08:47:30] Eixxx
[08:46:40] ❌
[08:46:00] Relock.
[08:44:34] A client brought it dead that\'s when i thought of flashing it
[08:43:49] Perform a factory reset
[08:43:28] If mtk no need of any special file with cm2mt2 bro💯👌✅
[08:42:49] File available.
[08:42:30] Yes
[08:42:12] Yea sure
[08:42:04] 😏 try using unlocktool, chimera or sigma
[08:31:12] Device state?
[08:17:41] Any solution sir
[08:16:37] Any solution to this
[07:52:02] un-check FireFly in settings
[07:50:56] Ok
[07:50:42] What was the problem before flash?
[07:45:58] model kicka 5(H5062) sir solution plz
[07:42:23] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM29)
MODE : PRELOADER PORT
PORT : 29
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
AGENT :
[07:40:43] A037f kg unlock supported?
[07:22:39] Kirin not supported
[07:21:31] Hello huawei PPA-Lx2 id remove help me
[07:08:17] Hi there
Please add option for Nokia hmd c1 2nd and c10 c20 read code by imei or flash mode.
Because new update May block diag mode for c10 c20 etc
[07:05:54] Card found : 550E7E6E , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Open : A16Plus-SA332-8.1-OP-V004-20180907.pac
VER : BP_R1.0.0
LEN : 1.43 GiB
CPU : sp7731e_1h10
VER : A16Plus-SA332-8.1-OP-V004-20180907
Reading package ...
Read package finished!
Patch Level : OPM2.171019.012
Display ID : A16Plus-SA332-8.1-OP-V004-20180907
Ver. Incmt : OP-V004-20180907
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 07.09
[07:04:38] Tried to flash the phone but still not switching on
[07:04:27] How to flashing this phone
[06:27:15] I need to this firmware
[06:27:00] Hello
[06:26:41] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM44)
MODE : BOOTROM
PORT : 44
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6582 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : MEID : 32EEDDC3953E223A49248C63AC44BB00
BROM : SecLevel : 0x00000000
BROM : SecMod
[06:26:22] 𝑶𝒏𝒍𝒚 🔞+ 𝑮𝒖𝒚𝒔 𝑱𝒐𝒊𝒏 𝒕𝒉𝒊𝒔 𝒄𝒉𝒂𝒏𝒏𝒆𝒍
👇👇
https://t.me/+vTAfdd32UfBjOWZl
https://t.me/+vTAfdd32UfBjOWZl
https://t.me/+vTAfdd32UfBjOWZl
https://t.me/+vTAfdd32UfBjOWZl
[06:26:22] -g-gg;vvvvvvvvvvvvvvvvvvv
vvvvj
vj
vvgvvgvvvvvvvvvvgvvvvvvvvvvvvg. G j
BBB vs jvvj
vj
vvvvvjvvvvvvvvvlm;vvvv:vvvvvvvbvvvvmvvvv
vvvvvvvvvvvvvvvvj
vvvv
v
vvvk:vvvvj
v
Vvvv
V vvvvvvvv:v:vvvh
vvv VN vvv::vvvvvvvvvvvvvvv
vvvvvvvvgvvvvvvvvvvvvvvvvvvvvj
vvvv vvgvvvvvvvvvvvh
vvv
Bvv
BBB VNV vvBC b
b
mb
vb
vbvvb
j
mv
InfinityBoxTalks 2022-07-03
[21:55:38] Still not working
[21:55:24] I have identified it
[19:09:14] You may try to flash with good firmware.
But also it may be hw fault, f.e. PA or somethig else
[19:07:59] How to reset password https://infinity-box.com/service/
Is it Ok now
[19:06:29] I do not flashed
[19:06:02] I tried to forced full factory+frp boot done and job succeed but still restarting after 1 minute
[19:04:17] Hope not hardware repair,?
[19:02:18] How to repair vifone k200 keep restarting..?
[18:59:54] Process it how and tools coz I have face this challenge I return to owne
[17:49:22] Account. I forget password
[17:29:33] A125f
[17:25:28] Model #
[17:18:47] Is it possible to repair imei on u2?
[17:16:49] When its u1 ,you can flash from u1 above
When its u2..you can flash from u2 above..
Meaning no downgrade or lowering bit version
[17:15:55] OK
[17:15:54] Not u1 ..u1 will not accept flash. But on test point will kill phone again. So u2 flash
[17:15:32] U2
[17:15:25] With u2 or u1 ?
[17:14:45] Or flash stock firmware now
[17:14:31] Now unlock bootloader
[17:14:08] ❤️👍
[17:03:16] Dead repair by Cm2 tool
[17:02:48] Thank you brother you are the best 👍👍
[15:41:03] Is wrong naaaaa
[15:35:28] Inbox me
[15:34:25] ZTEA31 lite Firmware please
[15:20:19] How to solve the problem
[15:19:04] Is it at startup?
[15:10:16] Hello
[15:10:04] Found 20 files nokia 130, search limit is 20 files per server
1. noname_copy_CSD_RDA8851C_CT8851B_flsh_spi32m_copy_Nokia_130
2. pm_collection_RM_424_Nokia_6720_353213033617921_0_400
3. pm_collection_RM_174_Nokia_5200_359816013086760_0_400
4.
[15:09:51] Hi
[15:07:08] Can I get the firmware?
[15:05:52] Ok cool
[14:56:24] There is a problem with the firmware
[14:54:53] Use main Nokia battery to test first
[14:54:03] V14does not work
[14:53:12] From where
[14:50:48] Hope you have use original battery from Factory?
[14:28:14] Ar
[14:27:36] Flash nokia 1035
[14:19:13] Vivo V23e Frp Fail..i have manual preloader add but same error..how to fix mtk high model
[14:19:02] Ok
[14:16:50] Else then use U2
[14:16:41] Try to get scatter file for U2 and U1 , then first load on U1 and check on results
[14:15:02] #CM2MT2 connection issue solution is HERE
[14:15:02] Card found : EA521FA8 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Socket Error # 11001
Host not found.
Load IDBase v312457 Ok!
EMI : DEV : MT6752
EMI : SRC : preloader_k6833v1_64.bin
EMI : CNT : 000E
EMI : [00] : eUFS : LP_DDR4X : DEV : KM8V8001JM-B813 : RAM : [ 8.00 GB ]
EMI : [01] : eUFS : LP_DDR4X : DEV : MT128GASAO4U21 : RAM : [ 4.00 GB ]
EMI : [02] : eUFS : LP_DDR4X : DEV : KM5H7001DM-B424 : RAM : [ 4.00 GB ]
[13:51:52] Not solution ?
[12:59:06] Ok let go this way
[12:58:15] And to complete, I have pc 💻 but I will ask to know if that solution is just available bsc in my mind, I have see it can be possible to do that tool.
[12:52:09] Thx 🙏 a lot sir, of cause I\'m a cooding man but I have n\'t have a good bagage to do that work but it is in my specifications list.
Maybe in future it will be release by me.
[12:32:17] Any solution for me ?
[12:26:50] 🙈
[12:26:37] 🙈💋
[12:20:37] Device was u2 Android 11. Imei invalid so i tried to downgrade with u1 scatter and it died
[12:17:14] What is device condition before Flashing?
[12:16:13] How ?
[11:49:50] Very nice idea but I am afraid you should buy PC if you want to work as mobile phone engineer.
Bad luck there is no apk at the moment that can flash another phone.
If you a programmer you can start your own project about that.
[11:48:13] Please let me be very clear, I want to make all opérations of phone unlock by an android phone, for that at the place of pc 💻, I want to use the phone by otg port canal to read other phones
[11:44:03] ta-1391
[11:21:31] Try again the same operation several time
[10:48:59] Any solution
[10:28:07] Nothing found for spark 5 nvram
If you will get the file upload it to support with iosFileUploader
[10:26:55] Use built-in loaders, it works for almost all units
[10:26:21] Click to IDENTIFY button before flash
[10:26:01] Ok
[10:25:09] Forum supporters will check it
[10:24:41] Please explain your idea
[10:22:25] Found 1 file ta-1191
1. N_2.2_N_2.2_TA_1183_TA_1179_TA_1191_TA_1188_here
[10:21:18] post sw log file
[10:20:56] run CM2SP2.exe for c20 and c30
see here https://infinity-box.com/?b=2145#2145
[10:19:12] https://infinity-box.com/doc/?r=17
[09:22:51] https://support.halabtech.com/index.php?a=downloads&b=file&id=251870
Help
[09:01:31] Nothing found for a326b
If you will get the file upload it to support with iosFileUploader
[09:01:17] Nothing found for a236b
If you will get the file upload it to support with iosFileUploader
[09:00:53] https://support.halabtech.com/index.php?a=downloads&b=folder&id=144859
[08:34:04] need scatter file
[08:33:34] Samsung-A326B_MT6853
i need frp tast point dead
only concerted end deconected
[08:04:38] Pls add repair paid for c20 g20 c30 model
[07:53:16] You\'re lost, how can we help you?
[07:31:41] Ok
[07:28:54] Everyday of my life i keep thanking God for directing me to your path you\'re a God sent. Now I\'m debit free, thanks a million.
https://t.me/joinchat/s4-HzCwA_9Q0Y2Y0
[07:22:53] Found 44 files nokia 2.2, search limit is 20 files per server
1. Nokia_8000_4G_8000_4G_TA_1311_6.0.1_MSM8909_MMB29M_2020_11_24
2. Nokia_G10_TA_1334_G10_MT6765_HMD_Global_00WW_11_00WW_1_070_RP1A.200720.011_ROGA_sprout.2021_04_05
3. recent_Nokia_TA_1334_G10_MT6765_HMD_Global_00WW_11_00WW_1_070_RP1A.2007
[07:21:45] Nothing found for TA1191
If you will get the file upload it to support with iosFileUploader
[07:18:16] Relaunch software bro
[07:09:30] I tried like that but still it says identify first
[07:08:45] I need nokia ta1191 firmware please
[07:08:33] Flash with scatter file
[07:06:35] A32 after Frp bypass blue LCD Dead
[06:56:40] I don\'t have original firmware
[06:43:51] Follow this instructions bro
[06:43:01] https://youtu.be/_QB8vDTVLJ8
[06:41:00] Initial state bro?
[06:40:06] Identify device first bro using same tools , then retry your operation
[06:39:28] Hope you have used battery from nokia factory?
[06:38:50] That\'s by default bro can\'t be use to flash, choose correct loader and flash up
[06:38:01] Found 6 files tecno kd7h
1. Tecno_KD7h_H6210CDEH_Q_GL_210901V501
2. Tecno_KD7h_H6210CDEH_Q_GL_210520V445
3. Tecno_KD7h_H6210CDEH_Q_GL_211101V534
4. Tecno_KD7h_H6210CDEH_Q_GL_200918V328
5.
[06:37:39] Paste SN here
[06:36:50] TA??
[06:35:30] Not clear bro
[06:35:02] ISP methods bro not sure maybe supported by cm2 tools
[06:19:30] He everyone it can be possible to flash or remove code from Android phone to other device such as other Android phone. To bref Android phone make operation like PC 🖥.
[06:08:34] Jaytag
[06:01:25] Tested 100%....
[05:49:40] hi plasss answer https://forum.gsmhosting.com/vbb/f296/i-will-never-share-infinity-dongle-via-network-because-usage-rules-violation-3025263/
[05:44:16] KG5k gives error when trying to read nvram or Read-back FW
[05:30:54] Yes
[05:30:11] Full flash with original firmware
[04:51:06] Flash original firmware
[04:48:16] Help please 👆👆👆👆
[04:48:01] How to fix orange state massage
[02:09:40] Wow, no need for flashing?
[00:38:35] Please help me out 👆👆👆👆how to remove Google account
InfinityBoxTalks 2022-07-02
[23:17:37] Sorry bro didn\'t do that. Accident
[23:15:50] Im Really eally sorry guys
[23:14:43] 🙈🙈🙈🙈🙈🙈🙈🙈
I\'m sorry admin this is an accident 😔
[23:13:47] Hi, how are you Keine Frau 03-07-2022 00:41
[23:13:47] Hi, how are you Moses Jackson 03-07-2022 00:39
[23:13:47] Hi, how are you Larry Ridwan 02-07-2022 23:40
[23:13:46] Hi, how are you ABDOUL LEMONARC 02-07-2022 22:56
[22:39:07] Follow instructions as written on the program initialize first!
[21:40:11] Help needed urgently
[20:56:28] Fine but i have problem a125f
[20:54:26] Hi, how are you ABDOUL LEMONARC 02-07-2022 22:54
[20:54:26] Welcome, thank you for contacting me, I will get back to you shortly.
[20:45:40] This scatter not work
[20:45:00] Solution for me
[20:44:19] Samsung A125f u2 dead 😭😭😭
[19:50:11] Please update the infinty Qualcomm tool as soon as possible 🙏
[19:49:34] Realme c11 i want to reaf flash but shows these error
[19:40:00] Flash please
[19:14:48] Gionee s9 Da file needed
[19:13:21] Pls help Infinity firefly not show flash
[17:52:58] Tecno kd7h nvram
[17:31:15] Tecno spark 5 nvram needed
[17:29:50] how to check cm2 expiring date
[17:28:48] Ok sir
[17:27:20] Samsung module dead?
[17:26:23] Ok
[17:26:12] Pls update mtk module
[17:26:07] AT&T may have vendor lock firmware
probably you must flash it but Im not sure
[17:25:28] C1 2nd Edition some time later, in progress
[17:24:56] Don\'t ask, just try
Another way - check tested models here https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/
[17:23:27] Nokia ta 1380 unlock plz help me
[16:55:14] thx bro
[16:52:11] pls how can i unlock my AT&T model U318AA android 10
[16:49:24] Operation : SP Unlock [ v2.34 ]
Mode : META
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB VCOM (Android) (COM65)
MODE : MTK USB PORT
PORT : 65
Boot done!
AP_CHIP : MT6739
AP_SWTM : Wed Jul 15 17:46:00 CST 2020
AP_SWVR : alps-mp-q0.mp1-V9.48_tinno.sh.q0mp1.k61v1.64.bsp_P20
MD_CHIP : MT6739
MD_SWVR : TK_MD_L4_HW
IMEI[1] : 864862041877562
ID0 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 1
[16:27:18] Thank you let me try this😊
[16:26:57] loader nokia c01 plus please 🙏
[16:24:07] Can i use cm2 to unlock oppo a3s
[16:15:05] You must install qualcomm drivers
ass more at youtube https://www.youtube.com/infinitybox/playlists
[16:14:30] Mi Account info https://forum.infinity-box.com/viewtopic.php?t=3947
[16:14:29] Ihave tried it several time but still not detecting but showing on device manager
[16:13:57] Make this https://infinity-box.com/?r=100155
[16:13:38] Control Panel -> Programs
[16:13:11] Hi,
Official web site https://infinity-box.com/support/?s=6
[16:09:52] https://dl1.infinity-box.com/47/pub/?dir=/soc-drivers
[16:09:00] Install CM2QLM
[16:06:31] Unknown baseband fix please
[15:17:57] qualcom not showing on cm2
[15:16:21] Thanx man👍
[14:27:22] hello guys i can\'t install this usb driver i\'ve downloaded a lot but not resspond
[14:17:17] simple meta utility v45 disable auth and work cm2 mtk
[14:15:23] mi account anti relock but my problem solve
[13:16:01] Hello guys just bought a new CM2 dongle and I need help with activation please.
[13:10:26] B1
[12:53:42] Please send me the video
[12:51:56] Contact support
[12:51:52] Uninstall usb share software
Usb redirector
Usb over net..etc
[12:51:25] Nothing found for mobicel rave
If you will get the file upload it to support with iosFileUploader
[12:50:56] Please my cm2 no day open I need solution pls
[12:48:23] OK thank sir i try
[12:47:45] File is scatter
[12:47:37] Including cm2
[12:47:33] Works
[12:47:32] Sir any mtk flash tool
[12:47:26] Or scatter ?
[12:47:06] Work on Cm2 ?
[12:46:43] With z3x firmware ?
[12:45:35] Any mtk tool can flash
[12:45:29] Cm2
[12:44:35] By unlocktool ?
[12:43:23] After..download stock firmware and flash by Odin...fix 👍
[12:42:31] It will go to this mode
[12:42:19] Yes flash above file
[12:42:02] Is there a solution for resurrection?
[12:41:33] And country
[12:41:30] Model
[12:41:13] Flash this file
[12:41:08] A125F U2 Dead Boot Repair Scatter unbrick Firmware [Tested Solution] [USB +Testpoint A12] UnlockTool [BIT2]
https://iaasteam.com/a125f-u2-dead-boot-repair-scatter-unbrick-firmware/
Post Date : 17TH FEB 2022
Remark Made with UnlockTool [and it is Full Tested ]
#Scatter Rom #Dead Boot Repair Solution
Note : World 1st Exclusive to IaasTeam
[12:40:34] ✅
[12:40:29] How to remove mi account permanent
[12:39:27] Downgrade isnt possible for binary versions
[12:39:18] Cm2 tool
[12:38:49] A125f u2 I tried to downgrade with the u1 and it died
[12:37:02] A125f u_?
[12:36:42] ?
[12:35:44] Which bit?
[12:35:32] Yes it is mtk test point work
[12:35:07] Remember to take the process easy in other not to undergoes (low power source)
[12:35:02] Is test point still working
[12:34:51] Im asking
[12:32:54] Which
[12:32:04] ?
[12:32:00] With what firmware
[12:31:57] OK
[12:30:45] Mtk port
[12:30:42] Test point
[12:30:41] Mtk
[12:30:21] With same scatter firmware ?
[12:29:13] Test point still working
[12:28:05] Emmc
[12:26:07] There is solutions for me ?
[12:25:38] Samsung a125f dead after flash with scatter firmware by cm2
[12:18:23] I flash with a new phone backup firmware but
Still nothing change the problem is stil persist
[12:08:05] Admin unknown baseband
[10:47:10] Thanks let me try
[10:46:02] flash with good firmware
[10:39:52] Any one with solution please
Tecno KC8
[10:01:18] Infinix note 7 baseband unknown fix please
[10:00:34] Ok tnx
[09:54:24] Give a trial bro
[09:36:20] Can smart reset data safe work??
[09:35:29] Infinix x695 pattern lock remove without data lost with cm2 please
[09:33:02] Add sams qcon a705 model in 9008 port. some changes. pass 12345678
[09:20:20] info about activation https://forum.gsmhosting.com/vbb/f296/infinity-data-explorer-software-2733086/
[09:20:04] double check this https://forum.infinity-box.com/viewtopic.php?t=6147
[09:10:13] DataExplorer
[09:02:47] Can any hepl me . When i open cm2spd2 is just show this . Even i reinstall cm2spd2 butt still same
[08:56:21] Available
[08:56:12] But solution
[07:30:08] What i the model name?
[07:28:10] Nothing found for Mobicel Berry
If you will get the file upload it to support with iosFileUploader
[07:24:47] Yes
See line 9 here https://infinity-box.com/price/
Ask any seller for activation
[07:24:10] https://infinity-box.com/support/
[07:23:10] now ok?
[07:22:07] Found 1 file TECNO LE6
1. Tecno_LE6_H6222CDEFG_R_GL_211101V242
[07:07:58] Nothing found for X5515 nvam
If you will get the file upload it to support with iosFileUploader
[07:07:37] What is the cpu type?
[07:06:40] Reboot PC and try again.
Is it Ok?
[07:04:50] https://forum.infinity-box.com/viewtopic.php?t=6147
[06:59:20] Phone is using TWRP recovery
[06:52:31] https://www.youtube.com/watch?v=CXM5GqJrtXY
[06:46:12] No
[06:44:43] Can i remove payjoy lock with cm2 mt2 model is Huawei Nova y60 wkg-lx9
[06:27:59] Ta 1174
From Oman
Is there any way to unlock this device
[05:51:41] Re install Spd driver manually,the one on infinity support site
[05:49:52] Reinstall new operating system
[05:48:08] Then reboot the phone it will come up
[05:47:46] Just plug the phone to PC while it\'s showing that testing, leave it for 20min it will automatically show pass
[05:34:15] Yes
[05:33:27] Re install spd drivers
[05:32:34] Please why my cm2 spd not connecting to phone at all?
[01:15:11] What did u do?
InfinityBoxTalks 2022-07-01
[21:50:56] Close all apps and remove all usb, then insert Infinity-box open exe. Don\'t open cm2 while using your cracks or other unrelated free tools.
[20:01:04] Every phone
[19:57:54] Hey I joined a network called www.googles.com and earned $25.00! You get paid for testing out new free apps and posting on social media. Sign up with my link for an instant $25 signup bonus! https://mnbllerewordsln.xyz/71272158814102/?s=tg
[19:55:33] Reopen the exe
[19:48:04] Model?
[19:44:57] Any help emmc firmware cant read can\'t update eMMC firmware in ufi its samsung a127f need help in ufi box need to reset rpmb provisioned
[18:55:43] I keep on getting this error any solution pls?
[18:53:48] Not at all
[18:53:39] More -you cam see in recovery;)
[18:53:27] Thanks
[18:52:56] Yes))
[18:52:29] Binary 1??
[18:52:04] PR SWREV B:1 K:0 S0
[18:51:26] Please admin which binary is this??
[18:22:34] frp a661w
[18:14:35] Can anyone please help me with NV data for nokia Ta 1275 (2.4)
[17:36:49] I need to unlock network alcatel 5033f
[17:19:31] X5515 nvram file need please help me family
[16:40:30] firefly checked or not in both situations result same
[16:36:10] Check firelfly
[16:26:30] a037f unable to boot with mt2
[16:20:36] Free enjoy 🤗
[16:20:11] https://www.mediafire.com/file/3zy3ut9980kqm0p/D.LIGHT_M200_FACTORY_FIRMWARE_FLASH_FILE_%2528TAHEEM_SOFTWARE%2529.7z/file
[16:15:33] Yez available
[16:14:02] How to block IMEI on IOS successed full?
[15:12:32] Operation : Reset Settings/Format FS [ v2.34 ]
Mode : FRP [ RESET PROTECTION ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM :
[15:11:32] Please I need Samsung galaxy A032f test point, it a unisoc chipset
[15:11:19] I keep on getting this error any solution pls?
[14:44:08] Operation : Reset Settings/Format FS [ v2.34 ]
Mode : FULL FACTORY ( FORCED + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 3C8CE8E4EB4674412255AD1538EC838F
BROM
[14:27:18] Repair bb mt2
[13:30:14] shield
[13:02:38] Nvram file for tecno KC6
[13:00:16] connect and try
[12:59:17] Can cm2 fix it
[12:59:08] Hard reset
[12:58:52] TA-1400 hard reset
[12:24:35] TECNO LE6 FIRMWARE
[11:57:10] Yes bro but needs best activation on your dongle
[11:28:18] there with pictures, even colored ones, you don’t need to think anything, just press the buttons in the indicated order. If that doesn\'t work, pay someone else.
[11:25:12] I don\'t understand this
[11:24:09] https://forum.infinity-box.com/viewtopic.php?p=2660
[11:21:45] Mulize mwalimu wako Apizu atakujibu
[11:20:01] Hello
[11:16:24] Meaning of this error
[11:11:14] On support
[11:07:26] Pls I need infinity Qualcomm emergency driver
[11:07:03] I want write firmware
[11:05:36] Itel flash boot help
[11:04:59] Is it possible to use cm2 dongo for nokia best ..?
[11:01:16] How can I fix this problem
[10:47:13] Mobicel Berry 2 Flash File Needed.
[10:29:03] Spectrum?
[10:28:59] Moto e40 cm2?
[09:59:53] can you read? then read my post above
[09:58:57] Found no help
[09:58:21] The code is unique as in only one particular Huawei or at a go or different type so if I want to do Huawei y5 will buy another key
[09:53:22] Send your Infinity username to seller https://infinity-box.com/buy/\r
How to know username https://infinity-box.com/service/
[09:53:22] Have checked it how to buy those credit
[09:53:18] https://infinity-box.com/buy/
[09:53:04] All price here.
[09:52:44] https://user.infinity-box.com
[09:52:35] And how to pay
[09:52:23] Okay how much
[09:51:18] I say again. The code is unique ONLY for this phone. for others you need to buy a new code
[09:51:03] No problem
[09:50:25] for this, you do not need to disassemble the device, close the testpoints. just entered and unbooked
[09:50:17] And will it work for all Huawei
[09:49:52] How much
[09:49:40] Okay
[09:48:32] this is a unique code that will only match your device an unlimited number of times
[09:47:45] should I buy you a code and give it to you?
[09:46:24] Bay it didn\'t get you
[09:44:16] #CM2MT2 connection issue solution is HERE
[09:44:16] Card found : 5D143461 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
UserName and/or Password not set! Can\'t continue!
Load IDBase v312457 Ok!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER :
[09:44:13] Bay it
[09:43:35] On fast check tool Huawei frp asking for key how to get it help pls
[09:39:32] Huawei scl t100 fastboot mode from reset frp
[09:37:55] huawei Y5 prime 2018 nvram file please help
[09:35:29] Help
[09:30:29] I try to read phone info but I got this info pls I need ur assistance
[09:25:35] Forgotten password
[09:25:25] Oppo a83 factory reset help
[08:42:28] What Infinity Team says will be the update of Qualcomm
[08:40:34] maybe yes maybe not, noone say right
[08:39:42] Qualcomm tool update may come this year
[08:36:36] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM41)
MODE : PRELOADER PORT
PORT : 41
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
BROM init passed!
BROM : Enforcing BootROM
BROM : Enforcing Failed!
Error : Fail to init protocol!
>>> Check and select CORRECT SETTINGS for your device!
Reconnect
[08:23:03] maybe wrong hand or chair
[08:13:51] not work cm2
[08:06:35] Yes bro and service available
[07:47:26] security supported?
[07:47:15] dear team is newly launched (25 may 2022) handset
[07:42:03] ok
[07:41:55] re install setup
[07:41:52] set not connect
[07:41:42] oppo A57 cph 2387 frp
[07:40:57] Operation : Make Service Report [ v2.34 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM25)
MODE : PRELOADER PORT
PORT : 25
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : S
[07:07:41] Try it first to know
[07:07:34] Download new one and install it
[06:03:48] Only way
[05:52:22] ??
[05:52:10] HMD SERVICE BRO
[05:35:00] Operation : Reset Settings/Format FS [ v2.34 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : SecLev
[05:34:57] can\'t boot
[05:25:10] link
[05:24:47] needs this file
[05:24:32] IntName : falcon
SW Info ============
DevSWVer : Blur_Version.221.201.2.falcon_umts.Latam.en.AR
DevQCVer : AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1.04.04.02.048.045
BootLDRv : 411A
HW Info ============
eMMCInfo : 16GB Toshiba REV=06 PRV=01 TYPE=17
DRAMInfo : 1024MB Samsung S4 SDRAM DIE=4Gb
/
[05:23:34] #CM2MT2 connection issue solution is HERE
[05:23:34] vivo s1 can\'t boot ? Mode : FULL FACTORY ( WIPE + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x0000
[04:42:50] cd7
[04:00:21] Ta 1322 pattern unlock. Any leads
[01:50:54] 😂 permafrost suite is available for this service sir👮♂💯👌✅, check out on private E-box.
InfinityBoxTalks 2022-06-30
[23:36:15] N916K note4
[23:33:48] how to unlock easybuy on infinix hot 11
[23:12:26] Hi
[23:11:41] Activate it before use
https://forum.gsmhosting.com/vbb/f296/infinity-data-explorer-software-2733086/
[22:47:00] Pls I need FERO PACE 2 lite NVM file
[22:37:12] No
[21:54:28] Can FERO PACE 2 NVM work on FERO PACE 2 lite?
[21:54:09] FERO PACE 2 lite no imel after successfully flash
[21:49:35] What to do to make it works
[21:48:35] Showing this
[21:48:18] Installed
[21:48:08] I downloaded data explorer
[21:34:35] Please I need fille for \"oale cc2 pro\"
[21:21:43] Found 28 files cc2, search limit is 20 files per server
1. Spice_M5151_KACC220_INA_EN_HI_1.15.525B
2. RM_1011_10.01.11_059V9V0_A7ECC201_RM1011_059V9V0_10.01.11_004.vpl
3. RM_1012_10.01.11_059V5W7_1CC217A8_RM1012_059V5W7_10.01.11_011.vpl
4.
[20:47:02] Found 3 files S661W
1. iTel_S661W_F3118_11.0_OP_V025_20211011
2. iTel_S661W_F3118_11.0_OP_V021_20210916
3. iTel_S661W_F3118_11.0_OP_V019_20210831
[20:41:47] Admin
[20:41:44] Hi
[20:37:16] 😞
[20:37:09] 😏
[20:29:58] 📲 Reparar imei Nokia 2.4 TA-1277 Con Infinity CM2 MTK en segundos
📲 http://www.clancells.com/viewtopic.php?f=120&t=6711 ✅
[20:27:56] Infinity Box Dongle [CM2] [BEST] Support - Reset password
https://forum.infinity-box.com/app.php/user/forgot_password
[20:24:39] I have tried all the possible and it doesn\'t work
[20:23:45] Use dongle manager to change your password incase you forgot
[20:21:56] Pls team help me i can\'t login my cm2 account
[19:51:29] We Robot una kazi kweli kweli hivi huwa unalipwa bei gani?
[18:07:18] .
[18:07:17] Untick
[18:07:13] .
[18:07:12] Disable EMI
[17:20:32] Ok
[17:16:56] Does this require contact extractor?
[16:55:34] Use cm2mt2 with test point bro
[16:55:09] Internet require
[16:53:33] Yea sure💯✅
[16:53:03] Model?
[16:52:22] Use *#0#*
[16:52:20] Please help me with chpset for this phone
[16:51:57] What errors
[16:51:45] A02 FRP BROM MODE
[16:41:43] Please Internet require?
[16:35:45] Pls #
[16:35:32] Upls Internet require?
[16:30:57] Any solution for IMEI redmi note8 pro
[16:30:06] Wow fantastic
[16:28:46] This variant too
[16:27:43] Test point right?
[16:23:44] Group is related to Infinity software
[16:18:58] Anyone who can fix iPhone X black camera
[16:14:39] Try all variants ;)
[16:13:57] Brom keys
[16:12:49] Brom
[16:11:48] How to connect phone like in what mode?
[16:04:06] Try cm2mt2
[16:02:39] let\'s wait help from this group members
[16:02:12] Yes, it\'s Ok now. Thanks
[16:01:14] Hope fixed now!
[15:55:11] nvram tecno KG5K only Sir?????
[15:53:20] I have this file
[15:52:23] Samsung A02 support frp?
[15:50:25] Found 1 file TECNO KG5K
1. Tecno_KG5k_F062_11.0_GL_V034_20220214
[15:48:50] I am afraid you should check this https://www.youtube.com/results?search_query=emmc+chip+replacement
[15:48:40] please someone know how to fix samsung ussd error?
[15:47:49] Yes
But now it’s not coming up anymore
[15:47:10] What is the problem with the phone?
Is it stuck on bootlogo?
[15:46:36] Make this https://infinity-box.com/?r=100155
[15:46:20] Make this https://infinity-box.com/?r=100155
[15:43:15] Please fix it
[15:36:56] Please CM2 HELP ME NVRAM TECNO KG5K 🤲
[15:36:33] What is the Username?
[15:16:46] User
Pass ok but not working
[15:00:09] PTFN : MediaTek USB Port (COM20)
MODE : BOOTROM
PORT : 20
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : BFC4F0B970C1F2323BAF7FC4CE134BD6
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x00000001
AGENT : 0_base : BASE_v1712 | Manua
[15:00:09] Stylo Bold Plus Pay Joy Solution
Card found : 229539B2 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Load IDBase v312457 Ok!
EMI : DEV : MT6752
EMI : SRC : preloader_agn_7130d_s40411a_e_ds843_q.bin
EMI : CNT : 0001
EMI : [00] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 se
[14:40:35] Help, i need to hard reset Nokia c1 TA-1380
[14:23:42] https://forum.infinity-box.com/viewtopic.php?p=2660
[14:23:14] https://forum.infinity-box.com/viewtopic.php?p=2660
[14:22:13] You didn\'t know?
No network share with cm2 🙈🙈🙈🙈🙈🙈🙈🙈🙈
[14:20:39] it error after install USB-Network-Gate
[14:20:39] plass help me
[14:19:02] Help
[14:18:47] use search in group
[14:12:32] untick auto EMI in Setting
[14:12:32] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM115)
MODE : PRELOADER PORT
PORT : 115
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
B
[14:10:16] Chinese Miracle II : MediaTek Service Module
Created by Infinity-Box (c) 2022
Creation time : 2022-06-30
Module version : 2.34
Device Info file : _Android_info.txt
Patch Level : JDQ39
Display ID : ALCATEL ONE TOUCH P310X
Ver. CodeName : REL
Ver. Release : 4.2.2
Build Time : 30.05.2014
Product Model : ALCATEL ONE TOUCH P310X
Product Brand : TCT
Product Name : ALCATEL_ONE_TOUCH_P310X
Product Device : POP7
Product Manfct : TCT
Product Info : POP7
Preloader [HW DEV] Info :
EMI
[14:06:12] Need help please
[13:11:26] Neon ray pro i want to Unlock Network
[12:58:57] My pc update itself and this is what my cm2 is showing
[12:20:49] Pls I need Itel A33plus nvram file
[12:04:11] model name?
[12:02:54] try with another PC or fix your PC with good drivers or use special tool and see where is your PC problem
https://www.nirsoft.net/utils/blue_screen_view.html
[12:01:42] Ok friend, thank you for your advice!
[11:56:35] Tnx
[11:56:18] Try tricks first bro
https://youtu.be/jkowq_63MuY
[11:47:30] Huawei p9 lite
[11:46:16] Model???
[11:46:03] 😂 permafrost suite is available for this service sir👮♂💯👌✅
[11:42:23] Huawei frp bypass please
[11:39:00] I re install still the same thing
[11:23:30] Good to see this but I want cm2 to upgrade so that it will support all phones all type of CPU,even solution of easy buy permanent remove
[10:51:19] OK thx bro
[10:49:45] In case of card damage it is possible to tarnsfer activations and support time to another Infinity card.
Contact to support https://infinity-box.com/contact/
[10:48:51] Nothing found for light m200
If you will get the file upload it to support with iosFileUploader
[10:48:30] Info https://forum.gsmhosting.com/vbb/f296/infinity-data-explorer-software-2733086/
[10:48:08] sw log text?
[10:46:49] select another base/model/loader or change EMI number manually
See example here https://forum.gsmhosting.com/vbb/f296/mtk-sec-2022-models-can-not-boot-3017035/
[10:46:17] Adm
[10:46:15] .
[10:46:13] Help
[10:46:08] Fotografia de Tonny Google Hacker 5.2
[10:43:15] Go get new one
[10:40:12] Ayiih
[10:31:37] Yes
[10:28:14] Need another activation ?
[10:10:33] Need get new activation?
[10:10:09] 🧐 What\'s is
[10:09:52] My infinity best smart card has been lost, what should I do now?
[10:06:20] 🙄🙄😳😳
[10:06:20] How dose work and it ask e something wen I try to loauch it
[10:05:27] heple need flash nokia 105
[09:59:48] Yeah
[09:56:41] How does it works
[09:43:52] I get solution install libus drivers,,,to whoever will get stuck here
[09:42:42] Is mtk
[09:33:47] Do you have a solution for me?
[09:32:26] data recover🤔
[09:29:08] Ok?
[09:28:49] admin
[09:27:17] I have my card which is grilled out I have just activated it for barely 2 months.
[09:21:39] Anybody with d.light m200 file plz 🙏🙏🙏
[09:17:25] Tool
[09:17:23] What is the utility of this took
[09:16:59] Alcatel 9032z unlock please tried with cm2mt2 But still locked I need help ASAP please
[09:13:03] Infinity Data Explorer v1.12 released
[09:09:01] i try but not working
[08:43:47] Y9 prime
[08:38:31] reball ram
[08:11:45] Ask any seller from the list https://infinity-box.com/buy/
[08:11:10] Any advice on how will get it or buy it
[08:08:45] 🤦♂
[08:08:17] South Africa
[08:07:33] Send ID lock interface
[08:06:00] Your country?
[08:05:41] http://dl1.infinity-box.com/47/?dir=flashfiles/N-3.2/
[08:05:22] Haw to remove id oppo A5s pls help
[08:04:36] Ask any seller from the list https://infinity-box.com/buy/
[08:03:26] Data Explorer Activation reqiuired https://forum.gsmhosting.com/vbb/f296/infinity-data-explorer-software-2733086/
[07:39:07] Thanks 👍
[06:57:29] hello i need nokia 3.2 NB0 firmware
[06:53:55] That\'s is what I don\'t have I wanted to know where I can buy them
[06:52:05] untick auto EMI in Setting
[06:52:05] still problem sir
EMI : DEV : MT6765
EMI : SRC : preloader_t99652aa1.bin
EMI : CNT : 0004
EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [02] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [03] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : Init EMI f
[06:43:53] untick auto EMI in Setting
[06:43:53] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : USB Serial Device (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 0AAE0E46A02456BA27C15721B9F78EB6
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BR
[06:43:52] untick auto EMI in Setting
[06:43:52] PTFN : USB Serial Device (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 0AAE0E46A02456BA27C15721B9F78EB6
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : C1CAEC4DDB1450CDCCFF0B0614620C4EEA2A6F5C9614637244FCBABB88D6B2F4
BROM : SLA : Local Auth
BRO
[06:43:52] untick auto EMI in Setting
[06:43:52] EMMC: CID : 880103534C4436344760B0AE4590C8A5
EMMC: VEN : FORESEE : OEM : 3 : ID : 534C44363447 : PRV : 0x60
EMMC: VEN : FORESEE : SLD64G
EMMC: SNN : 2964211088 ( 0xB0AE4590 ) , MF : 12/2021
EMI : DEV : MT6765
EMI : SRC : preloader_t99652aa1.bin
EMI : CNT : 0004
EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [02] : DR
[06:43:52] help me nokia 1334 flashing
Card found : F95F3BC0 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Load IDBase v312457 Ok!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : USB Serial Device (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
[05:48:10] Use the file loader and file the phone if is spd
[04:57:26] Don that but still they some thing
InfinityBoxTalks 2022-06-29
[23:34:15] Ufi isp adapter error code 17 cmd error anyone
[23:18:15] ok
[23:08:19] read instruction and follow them correctly
[23:03:25] yes CM2 Possible with test point. search test point on google
[23:01:16] Data explorer
[22:09:28] Is it possible to identify or flash Samsung A31 (A315F) with scatter file using CM2?
Is there a method or key combination needed?
[21:41:55] Connect Dongle or Box to USB port
[21:41:28] https://infinity-box.com/support/
[21:20:12] Pls help this is what I get every time If iwant to flash
[20:51:24] Turn off Usb 3.0
[20:11:13] What will are do
[20:02:17] Yes check your E-box bro
[19:31:49] I need hmd service
[19:29:14] Where can I get the software on your website or you have a site were I ca get it
[19:27:48] Your question not clearly stated further elucidate
[19:27:25] If you have Infinity Box you can use CM2 software too
[19:17:55] Hmd service
[19:14:30] Hi guys I wanted to find out from you guys where can I get a dongle to use on infinity box
[19:01:13] Thanks i got it
[18:18:12] Click here @FlashFileSearchBot and type there phone name. You will get links
[18:18:05] repeat the same operation several times
[18:17:24] Yeah thanks
[18:12:54] Please what can I do to this?
[17:51:02] Boothkey and what cpu. This not have volume keys
[17:01:28] Uninstall
Download installer again
Install
Do it now, it will be Ok
[17:00:48] what is your problem?
what is \"no success\" means?
post sw log text!
[16:54:54] Hey team
what is this error with infinity data explorer?
[16:24:46] try with another loader
[16:24:18] Click here @FlashFileSearchBot and type there phone name. You will get links
[16:23:16] Please house help me out please
[16:21:53] use another format mode
[16:21:51] Which boot key are you using
[16:20:49] download from Infinity server
[16:20:39] Found 1 file A661W
1. DA_SPD_USC_iTel_iTel_A58_A661W.fdl
[16:19:23] You must disable your PC firewall or antivirus
[15:59:16] Please any solution for this please house
[15:50:29] I used it..but didn\'t success..and this model is supported on cm 2
[15:45:58] Still the some thing
[15:40:43] Use
[15:40:42] 7731e
7731x
[15:38:35] Sc7731*
[15:37:37] How to do Itel Ac13 network unlock..I didn\'t find sc8731 CPU there... please help me
[15:25:48] That\'s the reason I told you what I use to solve mine
[15:25:29] Yes bro solved
[15:25:08] Have you encountered this problem before
[15:25:00] Doesn\'t matter in this case bro
[15:24:48] Or change usb cable also
[15:24:33] The phone stock on logo
[15:24:19] Bro check device port properly
[15:23:56] I have downloaded the boot pack for Sp2
[15:23:55] Check port properly
[15:23:27] Itel A33 plus is giving me this error.... Please 😣 help
[15:09:39] Samsung t255 Knox remove solution need
[14:48:48] Send logs here
[14:48:19] Don but still the same thing sir
[14:48:09] It\'s not there on the latest bootpack
[14:46:57] Download latest bootpack bro
[14:45:27] OK
[14:44:59] Read from device firmware or downloaded firmware used?
[14:24:44] I have been trying to flash this itel w6502 and do stop here
[14:14:42] Yes
[14:14:13] Solution Available
[14:13:07] Chipset
[14:12:52] Solution available
[14:04:13] How to remove it?
[14:03:49] X688b easybuy permanent plugin solution ?
[13:56:23] Operation : Reset Settings/Format FS [ v2.34 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
Device not found!
>>> Check cable, battery, connection and drivers!
Reconnect Power/Cable!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
Device not found!
[13:55:06] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 0799546CCB0A43D6C85DB746885924D3
BROM : SecLevel : 0x00000000
BROM : SecMode
[13:53:40] I have xperia L1 G3313 MT6737T pattern lock can cm2 remove the lock?
[13:50:47] https://youtu.be/-9VzRVwOcgc
[13:39:30] was the supor extended?
[13:38:28] Hie Technicians I\'m kindly looking for itel A661W loader
[13:28:48] But is not working boss ooo
[13:20:08] other firmware ?
[13:14:51] It may depends on SecVer, it may be unsupported sec version
[13:10:29] nokia 3.2 not flashing
[13:09:59] hi
[13:03:44] Nothing found for A260f
If you will get the file upload it to support with iosFileUploader
[13:02:16] A260f b10
[13:01:35] Ok
[12:58:25] You can install it.
But software can run only if or dongle has Data Explorer software Activation
[12:47:53] So if I install it, it can not work or else I pay for activation
[12:46:53] yes, just try and see result, it\'s best way
[12:45:52] 👍👌
[12:44:30] yes sure, you must select only CPU type, no need to select exact model.
Software have perfect AUTODETECT function
[12:39:53] Cm2sp2 v2.0 can use only 1 question, Cpu version shoose automat possible?
[12:37:39] Ok thanks will try
[12:37:09] first try with your existing version friend and post sw log text
[12:36:29] With new version its can be free unlock Sky?
[12:18:19] working, working
install boot-pack and use P651W-F3116-P37.fg
[12:16:06] Is not working sir
[12:15:55] Is not working
[12:14:31] select another loader
[12:13:59] Please FDL file For itel P37
[12:13:46] use built-in loaders. It works for 99% of phones
[12:13:19] Yes you can proceed anytime so many times as you wish.
But phone will be unlocked only ater order comes to COMPLETED state
[12:13:00] FDL FILE FOR ITEL P37 NEED
[12:12:08] Always install latest version
[12:07:53] Ok
[12:07:46] This device need credits.
info is here https://forum.gsmhosting.com/vbb/f296/sp2-v2-09-sprd-unisoc-spunlock-open-test-2924074/
[12:07:08] any news about cm2 Qualcomm
[12:06:37] https://infinity-box.com/support/
[12:06:08] what is the username?
[12:05:45] https://forum.gsmhosting.com/vbb/f296/infinity-data-explorer-software-2733086/
[12:05:24] replace emmc chip
[12:04:39] both
[12:04:17] Click here @FlashFileSearchBot and type there phone name. You will get links
[12:03:56] what password?
[12:03:35] post firmware version name
[12:03:03] Found 14 files tecno wx3
1. Tecno_WX3_H8014A_N_MZVC_171012V61
2. Tecno_WX3_H8014AC_N_180125V261
3. Tecno_WX3FLTE_B50046G_N_181107V9
4. Tecno_WX3LTE_B50048EFH_N_EGTE_181107V8
5.
[12:02:16] It\'s Mega-Direct service.
See Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[12:01:28] It may be old sw version has no unlock function,
For best results you must have latest CM2SP2. exe version
[11:59:52] Perfect!
[11:58:43] try now
[11:56:25] User 004BF12F83
[11:56:15] What is the problem?
[11:55:44] What is this phone the cpu type?
[11:55:11] what firmware?
[11:54:38] you must install /tools/boot-helper tool
[11:54:13] Try and see result
[11:53:55] you must install /tools/boot-helper tool
[11:52:30] What is the username?
[11:52:14] What is the device name and required firmware version?
[11:51:57] Pls
[11:51:56] Solutions
[11:49:50] What is the Username?
[11:49:10] Read user and password from.dongle manager
[11:49:00] Visit cm2 ios site and login ....if success..buy credits
[11:43:33] my cm2 acount is not active on line trying to by credit can some one help me make it active
[11:35:00] Hello, can someone please assist me with this file BD4H -XQ656SJ-RGo-OP-220520V257
https://support.halabtech.com/index.php?a=downloads&b=file&id=635146
[11:10:58] hello
i need good firmware link on this device pls
the problem is when it boot appear error \"coul mot normal boot, IB
NVALID KERNEL LENGTH\"
[10:28:34] Or try uninstall cm2,. Delete folder and install
[10:25:56] Re install windows and re inst cm2
[10:25:42] 😳 so sorry my boss
[10:25:02] Before I write this to forum,,I have done so,,but same problem
[10:25:00] This is nck dongle chat?
[10:24:08] Use Nck dongle one click
[10:23:06] hello TECNO RC6 network cm2 support?
[10:19:33] read and do what is written there.
[10:11:26] Uninstall cm2
Delete folder in drive c
Restart pc
Re install cm2
[10:10:50] Need help ASAP
[10:10:34] Samsung?😳
[10:02:07] volume up and conect cable
[09:51:50] or should I start looking for firmware for your gadget?
[09:51:09] Not at all
[09:50:30] Thank you
[09:50:24] Okay
[09:50:02] Use google search ;).
[09:49:27] Am still waiting for my on
[09:49:11] Okay
[09:48:51] This is not for you
[09:48:15] Is not mtk phone
[09:48:08] Try it...
[09:47:13] You have? RPMB?
[09:46:56] All right
[09:46:34] Sent me firmware link
[09:46:13] Full flash
[09:46:05] Erase
[09:46:02] Rpbm
[09:45:58] Yes
[09:45:58] How can help bypass moto xT1625 frp
[09:45:45] After that need flash right?
[09:45:35] Already done many mtk
[09:45:03] Super is system bro
[09:44:32] Up param
[09:44:25] Super
[09:44:23] Persistent
[09:44:08] Partition?
[09:43:53] Memory i mean
[09:43:46] Cm2 memort tool
[09:43:30] I mean how I can solve this problem? Which function I select?
[09:42:43] Give us some soft logs.
[09:42:42] Mt6580 use mt2
[09:42:22] Help
[09:42:11] Can see preloader port only..n more
[09:41:47] Most are updated, disable
[09:41:34] Mtk test point not all works now
[09:39:58] Yes,but. ... Testpoint
[09:39:17] Samsung disabled mtk brom in some models
[09:38:55] without a log is empty chatter
[09:38:09] Not really
[09:38:01] Tp/brom has been disabled if failed
[09:37:57] Nothing it get errors since it can’t boot to mtk usb port
[09:37:49] Soft log. If U know what is this
[09:37:16] Try bypass auth and see
[09:37:02] All drivers are all installed
[09:36:28] Check or re- install drivers, at first
[09:35:31] How can i fix Samsung A03s brom error can connect to brom even testpoint has failed to boot to brom am getting only preloader port
[09:34:56] this is. ufi Group? maybe ban?
[09:34:56] How?
[09:34:50] How?
[09:34:33] Yaa
[09:30:59] Mdm yes
[09:29:53] Unlock is possible? Vivo 2015
[09:17:30] Working now on WINDOWS 11 PRO
[09:14:28] Plug usb and preas all volume buttons..if can go download mode..
If not use ufi
[08:35:34] it seems very difficult to write in chat /file model
[08:35:09] Thank you I have got the search
[08:33:27] Found 51 files a21, search limit is 20 files per server
1. Celkon_A21_S8_72x_5.0_Celkon_A21
2. ZTE_NVM_ZTE_Blade_A210_MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V79_P11_1_lwg_n_eMMC
3. Tecno_SA2S_SA215D_8.1_ZA_VoLC_V034_20210823
4. Tecno_S
[08:33:09] Nothing found for samsung a21
If you will get the file upload it to support with iosFileUploader
[08:32:49] Found 14 files tecno wx3
1. Tecno_WX3_H8014A_N_MZVC_171012V61
2. Tecno_WX3_H8014AC_N_180125V261
3. Tecno_WX3FLTE_B50046G_N_181107V9
4. Tecno_WX3LTE_B50048EFH_N_EGTE_181107V8
5.
[08:31:33] Samsung A032f a03 core Only spd diag port at Pc. Not turn on. I also remove Battery but Not turning on. What is the Solution?
[08:31:19] Stl cant connect to brom when i remove KG
[08:31:17] Well, look without a password. Look at the support. Use a bot to search in a group. Or should I do a search?
[08:31:10] Direct
[08:30:29] I agree, need info about service, its direct unlock or.....
[08:30:07] I need samsung A21 ultra 5G clone Mt6582 firmware.pls help
[08:30:06] Reset kg first
[08:29:28] I need samsung A21 ultra 5G clone Mt6582 firmware
[08:25:38] Test points thanks i got but i fail or is it bcos phone is KG locked from South Africa?
[08:24:12] Not being lazy the link has password
[08:14:57] Nothing found for space type the model you are looking for 😊
If you will get the file upload it to support with iosFileUploader
[07:35:21] depending on which module has support for this cpu
[07:32:56] cm2spd or cm2spd2?
[07:31:48] Log
[07:24:34] how to repair imei by cm2spd
I can\'t boot cm2spd
[06:33:43] happens. broken. need to fix
[06:31:28] ?
[06:28:49] Should I waste time looking for firmware, just because you\'re too lazy?
[06:26:14] Send me a link for it\'s firmware
[06:24:54] It can not even be hard reseted
[06:22:09] Reflash it
[06:20:56] It\'s stuck on logo. Any I dear please
[06:18:50] Good morning everyone
[06:18:18] Did you got the help?
[06:17:06] The Data explorer , what is it work?
Admin please.
[06:15:16] The Data explorer , what is it work?
Admin please.
[06:12:04] Really
[06:11:37] qunlocktool server down
[06:11:25] hi
[05:35:48] STOPPED AT 29%
[05:30:58] ALL OTHER INFINITY AND OTHER BOX WORKING PERFECTLY JUST THIS MTK MODULE AND THIS IS MY FAVORITE MODULE IN THIS PC 90% USAGE PLEASE I NEED SOLUTION AM TRYING TO PUT THE PC BACK TO WINDOWS 11
[05:28:14] GOOD MORNING TEAM MY CM2 MTK LATEST HANG AND SHOW ERROR SO I USE 2.33 FOR FLASHING THE DEVICE NOT COMING UP
[05:27:50] I can help you
[05:17:02] All drivers on support
[05:09:27] Please send me the driver link
[04:30:28] Buy credits and proceed(need 5)
[04:30:01] 5credits
[04:29:34] Mt2
[04:25:41] I havent new version, by credit no need update dongke?
[04:25:18] How its can be?
[03:47:37] я тебе вчера писал. см2 спд модуль 2.14 и 5 кредитов
[03:39:15] Hello need unlock this Sky
[03:30:02] need 5 credits
[03:09:27] Neon ray pro V02 network unlock
[03:05:41] Use serch in group
InfinityBoxTalks 2022-06-28
[19:48:05] infinix X690B IMEI and nvram repaire help
[19:46:50] hi
[19:46:36] https://forum.gsmhosting.com/vbb/f296/nokia-c20-ta-1352-network-unlock-done-3024647/
[19:46:14] https://forum.gsmhosting.com/vbb/f296/nokia-c20-ta-1352-network-unlock-done-3024650/
[19:29:36] 👍 thanks
[19:25:23] Funny first install cm2mt2 then after that install bootpack
[19:17:02] Okay thanks
[18:59:54] any one of them of your own wish
[18:58:13] cm2mt2 boot pack 2.33 and cm2mt2 2.34 I want to install both which one I should install first dat is my question please?
[18:50:46] http://dl1.infinity-box.com/00/pub.php?dir=software/
[18:49:11] If I want to install cm2mt2 with it\'s boot pack with one is preferable to install first out of the two
[18:38:23] Anyone plis help me how to frp A037F this phone fails to connect to brom
[18:22:07] try
[18:21:42] can i do another? one done , 1 left
[18:19:21] Anyone with infinix X657 auth file
[18:13:45] wait
[18:13:18] Can i proceed with unlock or until its completed?
[17:58:40] I
[17:57:06] https://forum.gsmhosting.com/vbb/f296/order-delayed-3024613/
another from a friend mine
[17:56:27] ok, please wait
[17:55:20] ?
[17:53:43] +
[17:53:31] 0015DA6AAE
[17:53:10] username
[17:51:17] kindly check server or restart it if possible
[17:50:59] Hello since 3 Pm local time all orders are in QUEUED status
[17:05:44] wait
[17:03:17] Will my credits be back if I concel action?
[17:01:36] My client want to withdrawal his phone now because am keeping postponing. Can I consel action and get back my credits?
[16:59:57] Okay
[16:58:19] Check your E-box bro
[16:52:04] Wait till complete
[16:52:00] Log in here
[16:51:47] https://user.infinity-box.com/
[16:48:10] It takes some time depending on server wait or go to your account on server to check
[16:46:46] Ta1342
[16:46:23] Ta1342
[16:46:17] Tecno BD4h can\'t flash
[16:46:01] Am unlocking TA-1432 and the software is requesting me to wait 10 to 15 minutes. After waiting those minutes it\'s requesting other 15. I repeated 3 times now. Please help
[16:45:48] Go to your account on infinity server to see if that phone is ready or not
[16:44:50] Clearly written there wait for 15 minutes and also you can check if your phone complete by loging in your account
[16:44:40] Have waited now almost 30 mins...
[16:44:25] Your order is being processed on server
[16:43:11] Wait few minutes and try again
[16:42:44] Now fourth time.. Nothing happening.
.credit eaten
[16:39:50] Hello
[16:17:47] Renew windows
[16:10:46] A013g kg lock help
[16:07:19] Tecno la7 working panel urgently needed
[15:57:09] Low
[15:53:09] Nilipe niku downloadie😀
[15:50:04] You have USDT?
[15:46:58] hi admin peas help itel a507ls flashfile
[15:42:36] I don\'t have any... Can someone activat for me credits?,
Visa payment
[15:42:01] contact reseller near you
[15:41:40] 5 crd how much?
[15:41:10] Safaricom neon ray pro, how many credits network Unlock??
[15:37:06] https://forum.gsmhosting.com/vbb/f296/order-delayed-3024613/
[15:33:39] Same
[15:33:26] How to disable orange state
[15:30:57] Chage and put base_2044
[15:30:40] Is this the correct isp for ufi
[15:30:10] I tried no luck
[15:28:42] Same with v2.34
[15:28:34] Found 4 files ta 1206
1. BQ_BQ_S620_Mstar_PBA_V1.1_A600B_S620_7120_Y04_V09_20131206
2. Stylo_MT6580_STYLO_S53_STARK_8.1.0_w48_jingwei_W534_Stark_user_V4.0_20181206_O11019_S53_STARK
3. Lava_Captain_K2_32M_24M_V1.1_M027_20181206_ENG_IN
4.
[15:27:16] Try without Usb Cable
[15:26:45] Can someone please help me with this error?
[15:23:06] Renew
[15:04:17] use built-in loaders, it works for 99% of phones
[15:03:58] install latest unisoc|ums drivers from support
[15:02:51] post log text or get ban
[15:02:14] Is it good working or damaged phone?
[15:01:20] What is the phone state? is it good working or dead?
[15:00:39] copy/paste text
[14:59:10] Hi
[14:58:49] Fix your PC https://infinity-box.com/?r=100103
[14:58:07] Fix your PC https://infinity-box.com/?r=100103
[14:57:53] What zip help do you need, friend?
[14:57:20] Make this https://infinity-box.com/?r=100155
[14:57:05] Ok
[14:56:56] Do you think flashing unlock phones?
[14:56:16] post sw log text
[14:55:46] use built-in loaders, it works for 99% or phones
[14:45:10] Hey anyone help me i solder isp for a12s now ufi gives error and exynos3830 or can anyone gide me how to properly solder isp for a127f ufi box plz
[14:45:06] Hey anyone help me i solder isp for a12s now ufi gives error and exynos3830 or can anyone gide me how to properly solder isp for a127f ufi box plz
[14:45:05] Hey anyone help me i solder isp for a12s now ufi gives error and exynos3830 or can anyone gide me how to properly solder isp for a127f ufi box plz
[14:44:43] Hey anyone help me i solder isp for a12s now ufi gives error and exynos3830 or can anyone gide me how to properly solder isp for a127f ufi box plz
[14:39:57] X5515 nvram file need please help
[14:39:34] YES THANK YOU
[14:39:05] Ok renew service available
[14:38:46] SURE THANKS
[14:38:31] YES BUT MY CM2 IS ALREADY EXPIRE
[14:32:25] Renew
[14:30:18] Need RMX1821 nvram
[14:22:01] Uninstall and install back bro
[14:17:56] Please anybody can help out
[13:33:21] China mobile n3 loader file needed pls
[12:52:11] Nokia c20
[12:04:26] Have tried it many times but it doesn\'t work. Other SPD phones are working fine but this type of phone doesn\'t
[11:56:28] Hello any solution for reparie imei redmi note 8 pro
[11:49:12] just install latest dpd drivers from support
[11:24:20] free tool auth disable done but cm2 fail
[11:24:05] I\'ll give you results when I\'m done.
[11:23:16] Looking for mobicel rio-ss USB drivers
[11:05:30] https://support.halabtech.com/index.php?a=downloads&b=file&id=486538
Need this file
[11:03:26] After everything I just rebooted it and boom it worked
[11:03:16] https://support.halabtech.com/index.php?a=downloads&b=file&id=486538
Need this file
[11:02:50] It took 10minute to pass
[11:02:31] I Just plugged it using pc and gave it to to process with the testing
[11:00:25] What was it
[10:58:23] After I manage to copy where can I leave it for experts to analyze?
[10:53:43] Nothing found for masstel x8
If you will get the file upload it to support with iosFileUploader
[10:53:22] flash it
[10:52:00] I want to copy the Firmware, what is the next step? I already read the device
[10:51:15] Download signed firmwareI want to copy the Firmware, what is the next step? I already read the device
[10:50:48] Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO :
[10:45:17] Fixed thanks man
[10:42:14] Card found : 0F1933DB , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33
Load IDBase v1121431 Ok!
Operation : Identify [ v2.33 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , S
[10:39:02] Download signed firmware
[10:35:43] Any solution ?? Tecno F1 error wan flash
[10:35:26] Poco c31 da error
[10:32:02] Check power ic and other battery lines ..
[10:31:19] So what should I do now
[10:30:51] Vbat sense should be the issue
[10:30:32] That\'s what I think too
[10:30:10] Looks like hardware
[10:28:41] Yes
[10:27:25] Is it 💯 Solution
[10:26:52] Full flash
[10:26:32] Does anyone know y53s vivo testpoint
[10:21:42] Hi
[10:17:55] Hello any solution for reparie imei redmi note 8 pro
[10:08:54] What\'s the solution guys
[09:45:01] Model?
[09:44:29] Hi
[09:40:19] Hello
[09:26:08] Any probs?
[09:23:45] This is what happen after open cm2mt2
[09:23:08] Any technician from Uganda ....??? Tap me
[09:20:51] For?
[09:20:28] Check your E-box bro
[09:16:53] Who can disable admid app
[09:16:19] Use serch in group
[09:15:51] Not open, show any error??
[09:15:51] No sir there is no error after open sm2 logo it disappeared
[08:59:13] ANY HELP
[08:59:09] A505U U3 Unlock [Without Credit].zip (((((Sprint Only)))))
[08:58:16] Solution this
[08:57:35] you can learn programming and write it yourself. what is the problem?
[08:54:05] Pls admin help us upgrade the Qualcomm module and make s.m module back pls
[08:49:55] Nokia c20 firmware
[08:41:25] need one of these files.
G975N U7 Android 12 ROOT (G975NKSU7HVC6).tar
G975N U7 Android 12 ROOT (G975NKSU7HVE1).tar
https://support.halabtech.com/index.php?a=downloads&b=file&id=602955
https://support.halabtech.com/index.php?a=downloads&b=file&id=622530
[08:40:16] poco c31
[08:39:48] GOOD MORNING TEAM MY CM2 MTK LATEST HANG AND CRASH I USE 2.33 FOR FLASHING THE DEVICE NOT COMING UP
[08:37:53] Vibe 4g kaios nl
[08:37:10] Infinix x6511b fdl pls
[08:36:53] Some help Nokia c20 firmware
[08:36:38] Info
[08:31:21] what is the model name?
[08:31:07] before write something check your account
[08:23:56] How to transfer that credit this user name
[08:21:14] Unlock, please
[08:10:05] your PC has an issue
fix it
https://www.google.com/search?q=0x0c000007b
[08:09:31] Hi,
Contact to any seller and buy Infinity CM2 Dongle https://infinity-box.com/buy/
[08:04:45] you can use this username now
[07:56:56] Infinity cm2mt2 problem other tools are working fine
[07:53:46] Perform a factory reset bro
[07:48:32] hi how to have infinity box
[07:44:14] fake account closed
[07:42:31] https://infinity-box.com/?r=100103
[07:41:29] Nothing found for Masstel X8
If you will get the file upload it to support with iosFileUploader
[07:40:53] Nothing found for itel a36
If you will get the file upload it to support with iosFileUploader
[07:39:04] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[07:38:55] Nothing found for infinix hot 10
If you will get the file upload it to support with iosFileUploader
[07:38:44] Nothing found for Gionee f6
If you will get the file upload it to support with iosFileUploader
[07:38:26] CM2SP2.exe
[07:37:53] Nothing found for oppo a3s
If you will get the file upload it to support with iosFileUploader
[07:36:48] oppo
[07:36:12] Found 11 files tecno f1
1. Tecno_F1_VP510EFG_GO_180804V3
2. Tecno_F1_VP510EFG_GO_ETEC_200512V16
3. Tecno_F1_MT6580_S01_alps_trunk_o1.bsp_W18.04.k80_bsp.FACTORY_SIGNED
4. Tecno_L8_H805F1_L_EG_171220V38
5.
[07:35:45] Found 11 files tecno f1
1. Tecno_F1_VP510EFG_GO_180804V3
2. Tecno_F1_VP510EFG_GO_ETEC_200512V16
3. Tecno_F1_MT6580_S01_alps_trunk_o1.bsp_W18.04.k80_bsp.FACTORY_SIGNED
4. Tecno_L8_H805F1_L_EG_171220V38
5.
[07:35:12] 😞
[07:35:12] 🙄
[07:35:12] Trying to fix den red stage
[07:35:11] Orange stage
[07:35:11] 😢
[07:35:11] Unlock bootloader
[07:34:55] delete /CM2SP2/ folder
install again
[07:33:27] Hi,
Run tool and see result
post text
[07:32:21] sir long time i using this username plz help me insaid my 100 credit next time i use orignal
[07:30:22] 00371221D3
[07:14:41] Not open, show any error??
[07:08:00] Please help with Gionee f6 firmware
[07:07:43] Update Your cm2 dongle
[07:07:05] oppo a52 how remove pass code
[07:01:06] Cm2 mtk2 not open solution please
[06:57:09] Please add BD4J FIRMWARE on support
[06:49:18] What caused this bro?
[06:48:04] Not found
[06:47:17] What result to this?
[06:45:31] 😞😞😏😏
[06:45:24] Not dere
[06:44:38] Try here @FlashFileSearchBot
[06:44:38] I need file to fix dis 🙄🙄🙄🙄🙄anybody pls
[06:21:38] Nothing found for masstel X8
If you will get the file upload it to support with iosFileUploader
[06:11:54] Some help? I have this cell, just stop here,
[06:07:51] Check your E-message for reply
[06:05:34] Firmware for Masstel X8,
[06:05:31] Nothing found for gionee f6
If you will get the file upload it to support with iosFileUploader
[06:05:07] Yes bro I think your device is spd, download sp2 bootpack and cm2sp2 latest version, install both then use
[06:03:57] Please help me with Gionee f6 firmware link
[06:02:52] Found 11 files tecno f1
1. Tecno_F1_VP510EFG_GO_180804V3
2. Tecno_F1_VP510EFG_GO_ETEC_200512V16
3. Tecno_F1_MT6580_S01_alps_trunk_o1.bsp_W18.04.k80_bsp.FACTORY_SIGNED
4. Tecno_L8_H805F1_L_EG_171220V38
5.
[06:02:27] Please help Gionee f6 firmware
[06:01:41] Gtouch g2 plus flash file
[05:29:50] Download the 2 of them and install both of them. Then on the list, u will see hot 7pro file direct
[05:28:02] Boot pack
[05:27:49] https://dl1.infinity-box.com/00/pub/?dir=software/&uid=19171&file=InfinityBox_install_CM2MT2_boot-pack_v2.33.7z
[05:27:26] https://dl1.infinity-box.com/00/pub/?dir=software/&uid=19171&file=InfinityBox_install_CM2MT2_v2.34.7z
[05:25:42] Thx
[05:20:42] https://infinity-box.com/buy/
[05:16:15] How much 20credits cm2
[05:16:09] Where can I get boot up file
[05:15:12] And download 2.33 boot up file
[05:14:44] Download 2.34
[05:12:55] Snap the full background
[05:11:16] Let me see d version u are using
[05:10:57] Snap d full background
[05:10:34] I have done that
[05:10:02] Click sla and put it in broom and preloader
[05:09:53] I have do that bro
[05:09:16] Or hold both bottom before connect to system.
[05:08:37] Download latest cm2 mt2 boot file. 2.33
[05:02:54] Pls I need help
Hot 7 pro I want to flash with file is stopping on DA
[05:00:42] Hey pls I need a help
[04:59:42] Please help me with link to download Gionee f6 firmware
[04:58:53] online only
[04:19:51] Chipset?
[03:19:21] is itel w6503 supported? choose which cpu and model
[03:08:08] Hi friend help me with the firmware for tecno f1
[03:05:17] Thanks
[02:25:10] Sorry sir, is sony s1 qunlocktools server now is online?
[00:44:27] My cm2 is out of update
InfinityBoxTalks 2022-06-27
[23:57:58] Card found : 0F1933DB , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33
Load IDBase v1121431 Ok!
Operation : Identify [ v2.33 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , S
[23:39:25] What is the error?
[23:39:13] Click to APK file link and download it
[23:38:39] You should have [BEST] Dongle or [BEST] Activation for CM2
https://infinity-best.com/
[23:37:43] https://www.infinity-box.com/support/?r=100089
[23:21:45] poco c31 frp error
[22:49:40] This only for Infinity CM2 Best Sir.
[22:47:38] How to download android app in iPhone
[21:25:15] Welcome!
[21:24:45] thanks sir
[21:24:30] But same team!
[21:24:00] This is for infinity best not cm2
[21:22:56] is this module used with cm2 as well?
[21:22:05] No
[21:21:48] Is you who has issue of cm2 hidden setup names?
[21:19:18] I\'ll check tomorrow
[21:18:52] 10x64
[21:18:24] Windows 7?
[21:18:15] I\'m new to this, out of curiosity I downloaded the last version and today I see the update.
[21:15:12] I see new update called data explorer ,what is about?
[21:10:15] ???
[21:01:45] https://www.aligsmlab.com/2022/06/Miracle-Box-V3.34-Official-Free.html?m=1
Miracle Thunder Digital V3.34 Free One Month By Gsm X Boy
[20:45:52] Simple, go to the website, download and install this file
[20:30:24] and reinstall
[20:29:41] C Quoi le problème
[20:29:41] Photo de Inamalmouminina Ikwatou
[20:27:43] Go to Disk (C) and delete the folder
[20:26:26] Vá no Disco (C) e apaga a pasta
[20:23:47] I ran into the same problem, but I managed to solve it.
[20:20:23] Virus in pc
[20:09:18] Good night, help, I formatted the Sharp SHV36 after the process I can no longer make a call or check balance. I need a Phone app. the system version is 6.0.1. help.
[19:49:16] Hervé Zépé:
Une opportuniter de gagner de l\'agent sur internet
https://miningonebitcoin.com/?ref=Afangbedji30
Une site fiable qui paie bien
Cliquer sur le lien pour visiter le site
https://miningonebitcoin.com/?ref=Afangbedji30
[19:13:06] More also service available
[19:12:41] Cm2 tools please try to upgrade 👌✅💯
[19:09:10] Ok cool
[19:08:21] Bro no way.
[19:08:17] 😂😂
[18:47:35] Logs after using diag ??
[18:47:09] Hmd.
[18:47:05] No way.
[18:35:03] Try using cm2sp2 in diag mode
[18:32:24] Nokia 1380 reset please help
[18:31:47] Please password how can I remove
[18:22:20] Same?
Have you checked the link?
Have you tried with other loaders or woth test point?
[17:55:21] same
[17:55:18] #CM2MT2 connection issue solution is HERE
[17:55:18] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : S
[17:51:39] Vivo Y21S FRP Reset Fail
[17:51:27] #CM2MT2 connection issue solution is HERE
[17:51:27] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : S
[17:37:08] 🤝
[17:36:28] Work
[17:36:22] Waouh 😱 thank so verry much boss
[17:32:28] do not use debuggers with Infinity )httpDebugger is your case)
this time repair is free, next time I am afraid it will be paid.
now run DongleManager and update dongle firmware
[17:31:28] I still can\'t solve the problem, in fact I express myself better in French, please help me
[17:10:41] you got an answer month ago
[17:09:09] re-install SoC drivers
[16:55:35] I installed V2.33 working now
[16:38:04] I have missed a lot of MTK job this morning
[16:37:47] My Infinity-Box CM2 MTK crashing but the rest module working well then I try my other Don on MTK module working like magic
[16:16:54] Make this https://infinity-box.com/?r=100155
[16:16:54] Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Box/Dongle misconfiguration
Diagnostic code: 62
27-06-2022 16:50:02
Username: 00F12B219D
==> Scan C:\\Users\\LOGICIELS\\Downloads\\Compressed\\DongleManager_4\\ for report.log
==> Scan c:\\InfinityBox\\ for report.log
==> Scan c:\\Program Files\\ for report.log
==> Scan c:\\Program Files (x86)\\ for report.log
Found files: 0
==> Scan C:\\Users\\LOGICIELS\\Downloads\\Compressed\\DongleManager_4\\ for *.ibin.log
==> Scan c:\\InfinityBox\\ for *.ibin.log
==> Scan c:\\Program File
[16:15:43] Make this https://infinity-box.com/?r=100155
[16:15:43] CM2 Smart-Card misconfiguration! Contact to support!
[15:49:49] HI
[15:29:27] Try to install libusb then remove all filters usb
[15:12:42] message me for a multi-million contract
[15:12:37] Pls i need solution if I connect phone with cm2 dongle the system day show restart pls I need ur help
[15:11:52] who can do anything with computer
[15:05:03] Seriously🙄🙄
[15:02:53] Can I remove password in Redmi 9A without losing data?
[15:02:11] ????????
[15:01:29] Hi
[14:47:37] Any solution
[14:39:40] who can phish?
[14:22:24] Nothing found for Nokia TA-1192
If you will get the file upload it to support with iosFileUploader
[14:20:44] Yes payment option available
[14:13:43] file flash nokia ta-1192 pls?
[13:42:24] Thanx bro
[13:38:40] leave it, it\'s Ok
[13:37:39] What is your Infinity username?
[13:36:52] How to know Infinity username https://infinity-box.com/service/
[13:36:34] you must use Infinity username but not this fake username
[13:35:46] SeharH210106
[13:35:36] SeharH210106
[13:35:00] What is the username?
[13:34:36] Any problem?
[13:34:11] ask any seller https://infinity-box.com/buy/
[13:32:10] Install le Windows
[13:28:04] Check graphics driver
[13:13:51] Is this a virus or what ?
I need help
[13:08:54] help me plz
[13:08:43] when i remove c20 network lock giving error
[13:08:14] Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.46B_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P4_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P4
HW Version: sc7731e_modem
CMP_Time : 08-24-2021 17:58:44
MODEM TAG : MOCORTM_17C_W21.11.2_P4_Debug_FM_BASE_17C_W21.11.2_P4_sc7731e_modem_pike2_
[13:05:13] Need isp pinout sm-a135f for ufi box and nees mdm kg unlock file
[12:29:59] Symphony g50 frp
[12:14:43] hello plz active cm2 by paypal
[12:03:01] Hello
Infinix x657 mdm remove
[11:23:35] Cm1
[11:23:19] Infinity-box
[11:20:33] Infinity Best or cm2?
[11:19:34] infinity box they called Mmodule (mtk module)
[11:16:29] Is this screen for cm2 or?
[10:58:10] thanks for regular update Infinity team
[10:57:53] I found a old screen shot from my pc .my working old Infinity-box. )
[10:50:19] Working in friend laptop
[10:47:19] hi let me help you call me on whatsapp
[10:25:06] waiting for a result
[10:22:15] Make this https://infinity-box.com/?r=100155
Result?
[10:21:10] this is dongle error \"Diagnostic code: 5A\"
[09:59:35] Solution to this error please!
[09:42:06] But unlock tool reset it correctly,
It means cm2 is missing something for kg reset!
[09:41:27] MTK
[09:40:59] Untill I reset kg!
[09:40:30] It stuck here when power on!!
[09:36:07] Can\'t power on, it stuch he
[09:34:27] Power on device bro
[09:33:01] See here!
[09:30:41] Yes, really set!
[09:29:06] Don\'t know every week update
[09:20:48] SPD drivers
windows update
something else was installed
[09:19:30] Yeah working in friend computer
[09:18:54] Hope imei at the back of device is the same as the one under settings?
[09:16:14] Are you sure KG is really set at your phone?
[09:11:43] I tried many operatins of kg not done, always that msg!
[09:08:48] Operation : Change KG state [ v2.34 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM20)
MODE : BOOTROM
PORT : 20
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : MEID : DCCAE896FD56DFB76B6D77B452EA444A
BROM : SecLevel : 0x000000E5
BRO
[09:03:43] Post logo
[09:02:54] Sm-A225f \"kg not set\" when trying to set it to complete!
Any solution team...!
[09:02:04] Let me try in my dongle again
[09:01:52] Best
[09:01:42] It\'s working but another dangle
[09:01:16] Ok
[09:01:16] M\'y infinity best IS desactived since 4 years so i need activation umt
[09:01:03] Sir add nck also on your server or intertdues some more interface
[08:59:32] What is the result with another username?
[08:59:19] There is no such option yet
[08:58:58] Ohk
[08:58:35] as a first step you must install telegram to your PC
it helps you to avoid bad quality selfie posting
[08:58:15] Is it possible to do?
[08:57:44] I nerf activation umt on m\'y smart card infinity best
[08:57:27] I am putting and trying
[08:56:03] good. your last hope - ask your friend to enter his username at your PC.
Do it and see result
[08:55:27] Change both
[08:51:56] usb drivers issue or PC issue
[08:46:49] Still same
[08:46:45] This is another pc
[08:40:22] This pc i am using for past 5 years never formatted
[08:39:28] I guess it\'s not true
[08:38:51] No driver only u told me to reinstall spd i just installed that
[08:38:19] Nothing
[08:38:04] what software or drivers did you install after 08 Jun?
[08:36:07] truth is:
username is ok
you killed your PC somehow days ago and now your PC is not good for work. You must fix your PC
[08:35:34] So what is the truth
[08:35:24] perfect
it means you destroyed your PC
you must fix your PC
[08:34:55] Check
[08:34:49] it\'s not true
[08:34:34] Check how many i unlock
[08:33:51] He also fail
[08:33:43] I gave my id password to my friend also
[08:33:32] Ask your friend for manual how to unlock
[08:33:19] I change pc also
[08:33:14] you must install drivers well
you must always read info that you got from support!
ignorance is bad
[08:33:03] U cannot unlock in flash mode only working in diag mode
[08:32:42] it means your PC is bad
[08:32:26] I gave to my friend
[08:32:05] 356748979239906 unlocked today 6 minutes ago
[08:30:06] Use FLASH MODE but not DIAG
[08:29:08] Use FLASH MODE but not DIAG
[08:22:56] Since 08 06 2022 no unlock done
[08:22:32] can you enter support area with this credensional?
[08:22:17] are you sure that user - correct?
[08:21:29] Everything
[08:21:26] Yes i change reset
[08:21:08] did you input login and assword?
[08:20:47] Check the results
[08:20:26] 1. Use FLASH MODE but not DIAG https://forum.infinity-box.com/viewtopic.php?t=5629\r
2. Install latest SoC drivers UNISOC | UMS9117 | SPD https://infinity-box.com/support/\r
\r
You must check 1. and 2. twenty times before read 3.\r
\r
3. It may be seriously damaged phone (that is not supported yet)
[08:20:26] Card found : E1CA285D , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.20100
[08:19:49] C20 is supported by CM2SP2.exe
run software, click to unlock, follow the instruction on screen.
What is the result?
[08:19:31] Sim lock
[08:17:42] Thanks
[08:17:23] delete software folder
install it again
do not install boot-pack
[08:16:55] C20 is supported by CM2SP2.exe
run software, click to unlock, follow the instruction on screen.
What is the result?
[08:16:14] Even if I use default loaders not work due to installed boot-pack
[08:16:04] boot-pack installation has no effect like that.
It looks like you are doing something wrong.
[08:15:15] What is the problem?
[08:14:50] you can order new dongle
after that contact to support via e-mail https://infinity-box.com/contact/
and ask to block stolen dongle and to transfer support time or activations to new dongle
[08:13:07] you have two ways:
1. do not install boot-pack
2. if you have boot-pack installed just use default loaders that is still there after boot-pack installation
[08:13:03] If a person has his cm2 Dongle stolen from him is there any way like to buy or order black card with reader and replace the stolen one ? Interns of Serial Number and details
[08:11:42] Solve this
[08:11:35] Plz
[08:08:42] But , if I delete pack boot it automatically boot normally,
Please team , add boot for Samsung devices
[08:06:54] It was automatically deducted on base 2112
[08:05:59] For now , auto detect disabled after installing packboot!
A225f is not detecting !
[08:05:54] Already tried this thing
[08:04:11] Everything thing
[08:04:04] Installed
[07:57:57] Phone is on just need sim lock to remove
[07:57:40] 1. Use FLASH MODE but not DIAG https://forum.infinity-box.com/viewtopic.php?t=5629\r
2. Install latest SoC drivers UNISOC | UMS9117 | SPD https://infinity-box.com/support/\r
\r
You must check 1. and 2. twenty times before read 3.\r
\r
3. It may be seriously damaged phone (that is not supported yet)
[07:57:40] Card found : E1CA285D , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.20100
[05:28:07] Hello 🏠 how to copy software log text in PC and paste here to support @forum of cm2
[04:35:49] I also need Gionee f6 firmware. Please help
[04:35:11] Please I can\'t find it
[03:45:57] *#*#13491#*#*
This is correct
[02:59:33] *#*#13419#*#*
[02:18:18] help, how to repair \"Diagnostic code: 5A\"
InfinityBoxTalks 2022-06-26
[22:19:18] Found 1 file tecno kg5k
1. Tecno_KG5k_F062_11.0_GL_V034_20220214
[22:18:51] Hello,
Estimated price is here https://infinity-box.com/price/
Ask any seller for details https://infinity-box.com/buy/
[22:14:23] Please help me with tecno kg5k NVRAM file
[21:08:13] hello, how much does the cm2 credit cost for the unlocking
[21:03:27] post detailed info to support forum
copy/paste model name and software log text
[21:02:17] insult post deleted
you must control your stupid brain
next insult of admin gives you permanent ban
[20:04:26] not at all
[20:04:11] Is Completed Now. Thanks.
[20:03:48] no? just wait, need more time
[19:59:17] Team Long Time To Executing? Admin Is Sleep?
[19:49:57] Yes
[19:45:38] Helo
[19:32:51] Today I tried to reset frp on tecno s1 I got that error , Friday I failed to remove frp on tecno ba2 I got something like that while dongle is detected and sense and full activation till to March 2023
[19:30:48] If you use spd,quallicom,scr etc it opens immediately and working 💯 fresh the issue is this I failed to reset frp on cm2
[19:28:51] Dongle is clean and working 💯 but if I try to reset frp through cm2mt2 when I inserted username and password and back to service it shows this error
[19:27:55] Are you sure?
[19:23:21] After installing cm2mt2 boot pack cm2mt2 not open again
[19:15:47] Try to insert Smart-Card into another Card-Reader or Box
If problem still exist:
- Remove Smart-Card from Card-Reader
- Clean Smart-Card contacts
- Try to use hot air gun and heat Smart-Card
- Insert Smart-Card back to Card-reader
[18:47:09] I understand him or her because i was like him. Infinity CM2 Best♾️ Supports is top class and Genuine. They also welcomes new comers or beginners because it\'s a user friendly but you\'ll need technical skills to go deeper. I don\'t want to mention the automated system (bot or robot) is like working in the moon. Give yourself some time ⏲️, you\'ll Thank Me Later.
[18:44:39] I tried to remove frp for some devices but I got something like this always
[18:43:56] Please help me what is this..?
[18:40:20] Found 15 files Itel A571
1. iTel_A571W_F3116_10.0_OP_V022_20210917
2. iTel_A571LL_F3216_10.0_IN_V008_20210107
3. iTel_A571W_F3116_10.0_OP_V018_20210623
4. iTel_A571L_F3216_10.0_IN_V017_20210413
5.
[18:40:02] Try both modes, let\'s see result
[18:39:48] have you heard anything about rsa? it\'s just this case. I said above what to do.
[18:39:43] what is cpu type?
[18:39:03] Nvram empty, bad.
[18:38:41] because, as I said earlier, there are very smart users who take off the checkmarks, then whine. like so.
[18:37:57] trying to write backup from another phone
Operation Write Memory
Write selected partitions [2]
[0] Write partition : NVDATA
Write from : D:\\CEL\\XIAOMI\\BEGONIA - REDMI NOTE 8 PRO\\IMEI LINO\\NVDATA.bin
ERR : 0xC0010001
ERR : ERROR
ERR : 0x00000000|0x04000000
[1] Write partition : NVRAM
Write from : D:\\CEL\\XIAOMI\\BEGONIA - REDMI NOTE 8 PRO\\IMEI LINO\\NVRAM.bin
ERR : 0xC0010001
ERR : ERROR
ERR : 0x00000000|0x00000000
Operation finished!
[18:37:10] not have backup
PTFN : MediaTek USB Port (COM84)
MODE : BOOTROM
PORT : 84
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Krug
TYPE : MODERN RAPHAEL
BROM : MEID : F8620D9D5E9C7111DEE0A3DE98BBA609
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_LINO : MT6785\\XIA - Redmi Note 8 Pro - Mofadal | Manual : Disabled
BROM : SOCID : 3D14
[18:36:47] not have backup
[18:24:37] Not done auto backup
[17:56:47] mr dont lie infinity support always help until you understood what was wrong
there no any other honest support like infinity team
[17:44:01] Wow 👌 that\'s great 👍 + Bonus
[17:39:33] Use unlock tool is the best for now
[17:29:20] Pls guys can anyone share for me the best software to flash Nokia 3.2 that is hanging on Android one log...
[16:48:14] Nothing found for tecno kg5j
If you will get the file upload it to support with iosFileUploader
[16:45:17] Kg5j file pls
[16:29:31] Cm2
[15:18:41] Tecno CE7j boot file please
[14:39:05] I didnt know flash mode now supported for that model
[14:28:15] Please help with Itel A571w nvram
[13:47:44] Each dongle has it\'s own account
But you can add credits to one account and use that username and password for all three dongles
[13:45:32] Can I own 3 dongle in one account or i need different accounts to have 3 🤔?
[13:18:30] About what?
[13:18:24] post full sw log text
[13:17:00] No idea
[13:15:49] What is locked network mcc/mnc?
[13:15:10] Some of the phones security is higher it takes credit
[13:14:56] Tecno camon 17p
Locked Network
[13:12:01] Model name?
Locked network?
Firmware version details?
[13:08:28] It\'s okay. With this method, my dongle work correctly. Thanks you very much Admin
[13:02:50] Make this https://infinity-box.com/?r=100155
[13:02:50] Box/Dongle misconfiguration
Diagnostic code: 5A
Hi br,how to deal with this problem，thanks
[12:51:14] Vivo y15 pd1901bf
[12:49:40] Model?
[12:19:38] X688b NVram and nvdata file please
[12:19:00] first at all is frp...but after erase frp..frp still there..i try another tool...then keep bootloop..then was trying to flash....but always failed in userdata...then become bricked
[12:17:59] What\'s wrong with device before flash
[12:17:42] 🤦♂
[12:17:01] device is bricked now
[12:16:56] mean ?
[12:16:09] Initial State bro?
[12:15:25] anyone know what is the issue and how can i fix ?
[12:15:13] try to flash vivo y15 pd1901bf ..but got this error
[12:14:57] Error : Failed to read initial info! Device Erased or Damaged
>>> Seems as something wrong with device! Check battery charge and device state!
[12:09:13] It\'s showing Network lock
[11:49:47] Nokia c10 network I need the help please
[11:43:50] How much pls
[11:43:16] A years and 2 years activation available
[11:42:58] Yearly bro
[11:41:29] Pls someone tell CM2 activation is it a lite time or yearly activation
[11:11:42] You got an answer long time ago
Where is your reply?
[11:10:43] Nothing found for TECNO BE7
If you will get the file upload it to support with iosFileUploader
[11:10:31] What is the problem with it?
[11:09:44] Hi,
check https://infinity-box.com/?r=100189
[11:06:11] нщг ьгые штыефдд пщщв ьел вкшмукы
[10:28:42] TECNO BE7 FIRMWARE NEEDED FREE DOWNLOAD LINK HELPS ME GUYS
[10:23:26] https://forum.gsmhosting.com/vbb/f296/dongle-activation-help-3024183/#post14575212
Checked support no answer till now
[10:22:50] Hello i unfortunately press order of activation of my Chinese miracle 2 songle(cm2) to another year while it was still having 5 month help to cancell the activation i had done i need to use that money on activating cm2 when i need i unfortunately added another year
Dongle serial
Serial No (S/N): 6E64753E
[10:08:01] U re a genius. Tnkx alot
[10:06:00] It worked perfectly
[10:05:39] I must confess. U re a jenuis
[10:01:28] IMEI[2] : 352268180159771
ID0 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000
SPLock Info : Not locked!
Done!
Elapsed: 00:00:44
[10:01:28] Operation : SP Unlock [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM223)
MODE : BOOTROM
PORT : 223
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 813BDC43B9080F67C29393A0884E9654
BROM : SecLevel : 0x000
[09:52:22] IMEI[2] : 352268180159771
ID0 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000
SPLock Info : Not locked!
Done!
Elapsed: 00:00:44
[09:52:22] Operation : SP Unlock [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM223)
MODE : BOOTROM
PORT : 223
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 813BDC43B9080F67C29393A0884E9654
BROM : SecLevel : 0x000
[09:43:08] hi guys
i have problem
i can’t read firmware
modem vivo v2058
android 11
[09:42:06] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
Device not found!
>>> Check cable, battery, connection and drivers!
Reconnect Power/Cable!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
Device not found!
>>> Check cable, battery, connection and driver
[09:42:06] Card found : D020857C , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
UserName and/or Password not set! Can\'t continue!
Load IDBase v312457 Ok!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM113)
MODE : PRELOADER PORT
PORT : 113
Waiting BOOT a
[09:40:48] Let me try
[09:39:38] Ok
[09:37:07] Remove all
[09:28:41] Just unitstall all libusb drivers. I was having same issue . I\'m done now
[09:28:05] Please help me out admin
[09:18:22] Please help
[09:15:14] Can cm 2 spd headrest this
[09:13:16] As soon as the phone connects to brom mode, the computer will restart. What do I do
[08:59:51] PLEASE WHAT DO I DO? Cmtmt2 gets to sla. D system will reboot
[08:59:24] PLEASE WHAT DO I DO? Cmtmt2 gets to slap. D system will reboot
[08:37:00] Credits are there since 22 hours. You can do the job.
[08:36:32] Sar is there way to fix red state... I have lg k310im can\'t find firmware etger
[08:35:23] use FLASH mode
[08:34:08] There is no connection at all!
Select another base/model or DA
Change USB cable
Change USB port
Reboot PC
[07:46:28] make a normal screenshot
[07:44:33] Redmi 9c not flashing not read firmwre
[07:35:15] you should always make a backup. This is done automatically in the software. but there are VERY SMART ones, and then there are posts like this. look for the rsa resistor and do something with it. then restore.
[07:33:21] https://dl3.infinity-box.com/47/pub/?dir=soc-drivers/&uid=19169&file=Drivers_Nokia_HMD_2018-09-19.7z try install this drivers. Then reboot pc.
[07:30:17] Hallo Redmi Note 8 Pro, full erased flash, have no backup, imei null, possible to rebuild security? Not know original imei
[07:27:43] 00397223B8
[06:26:31] Nokia C10 diag mode fails, phone goes ON....does it mean new security patch diag disabled or something wrong?? I changed cables and computer same
[06:23:02] It\'s best
[06:13:47] Use BEST....
[06:10:35] Device issue?
[06:07:47] Nothing found for coolpad 8675
If you will get the file upload it to support with iosFileUploader
[06:07:20] nokia ta 1174
[06:06:38] Model bro
[06:05:52] How may I be of help bro?
[06:04:03] https://easy-firmware.com/index.php?a=downloads&b=file&id=329607
Need this file. Urgent.
[06:01:47] To?
[06:01:22] Please sulotion
[03:14:09] Invest and Earn in this great company.
https://tinyurl.com/459tacsa
https://tinyurl.com/459tacsa
InfinityBoxTalks 2022-06-25
[22:16:42] I need easybuy security permanent solution for mtk device help pls
[22:06:47] Ok
[21:39:09] Yeah .......u hav to had option of removing mdm (kg,easybuy and kpa wat ever to mtk and spd.....and try to update quallcomm ...cm2 is backword in dat CPU.....u nid to work on dat pls......
[21:31:49] Ok
[21:31:41] copy sw log text
[21:31:30] wrong pasword
enter good password!
[21:31:03] enter good password!
[21:30:40] wrong pasword
enter good password!
[21:21:36] Can you please add SPD MDM remove option on spreadtrum module and activate memory tools. Please team?
[20:45:09] Realmi rmx3501 flashing failed... Cm2sp2 how to solved
[20:34:24] Done ✅
[20:30:40] !!!!!
[20:29:03] Spark 7
[20:28:56] Yes
[20:16:33] Are you conect your pc to network
[20:16:06] Wich Phone ?
[20:15:50] It shows authentication failed !!!
[20:14:47] What do you nedd
[20:13:21] Any help
[20:09:35] ???? Pls help
[20:08:59] I login my cm2 and I need to remove frp from tecno BD2 (spd) is not done
[20:07:27] I have done that boss
[19:57:27] Wtite login and pass on settings tab
[19:55:45] Solution please
[19:49:12] Fixed after unstall usb over network then delete fault bin
[19:44:13] Fix your PC https://infinity-box.com/?r=100103
[19:43:22] S/N?
[19:42:48] latest ver https://infinity-box.com/service/
UNPACK it!
[19:38:56] you must enter good password
do you know it?
[19:38:19] What is your dongle S/N?
[19:38:04] What is the Username?
[19:37:23] What is the Username?
[19:36:36] Try with another loader selected
[19:04:53] I can\'t watch this video on my phone and I don\'t have a computer nearby
[19:03:55] Okay i see
[19:03:40] didn\'t need to be removed. now how to understand what interfered? maybe you used debuggers or other forbidden software?
[19:01:57] Tool wont open
[19:01:50] I delete fault.bin then Dongle manager-》report&fix ok but still same
[19:01:00] Try search cant find
[19:00:50] Sorry sir
[18:58:29] I have already said what to do with fault.bin. No need to think. Just do it.
[18:57:07] for such a video, hands should be torn off. Should we flip the monitors? or how? Here, put yourself in our place, is it very convenient for you to look at this pornography?
[18:55:55] Ssl library
[18:55:47] Could not load Ssl
[18:54:42] Dongle manager-》report&fix
[18:54:08] Fault.bin
[18:53:54] Plz help
[18:53:51] Admin
[18:19:05] Why app crush when open
[18:18:47] Hi
[17:10:34] Ok
[17:10:06] Nokia 520 can unlock by infinity dongle now?
[15:57:03] Coolpad 8675-hd mtk flash file needed
[15:01:19] Reset it
[14:59:37] Team an trying to log into my infinity account but still says wrong password
[14:57:32] Hi
[14:16:26] https://youtu.be/I02QmUOHN9o
[14:16:09] https://youtu.be/DxuLbRd6Z5M
[14:13:52] Post your login
[14:08:02] 62 order failure
[13:51:55] You need update support https://infinity-box.com/buy/
[13:49:58] Any help here
[13:44:20] And soft log post here, since the first unlock attempt
[13:42:55] https://user.infinity-box.com check balance here.
[13:41:00] I\'ve read, it says I have zero balance
[13:35:07] Read carefully what the software says
[13:31:53] I\'ve bought credits, my account still says Balance ...please help
[13:29:22] https://infinity-box.com/buy/
[13:25:37] What do.you need
[12:21:32] But format working not any errors
[12:21:14] Flashing telenor infinity e4
[12:20:25] What is this problem
[11:47:08] im new 3 file upload on ios file uploader
ALFAJR A40. 4 SIM
ASHNA K4. 4 SIM
IVA J115 2 SIM
[11:28:49] To remove frp on Samsung with fast check tool,will the phone be power on,concern the YouTube video I watch? Admin please
[11:21:48] Shukran will do that
[11:19:01] Yes bro
[11:15:28] In CM2sp2
[11:14:27] Try to identify with diag mode
[11:14:03] Which boot
[11:13:45] Use cm2sp2 bro
[11:13:01] To remove from on Samsung with fast check tool,will the phone be power on,concern the YouTube video I watch?
[10:32:38] Flash Stock Firmware ROM on Majestic Tab 301 3G problem
[10:13:07] Use cm2 tick local SLA
[10:00:15] How to unlock Neon Ray Pro Network
[10:00:09] da infinix x657
[09:58:08] Any one with infinix x665 nvram file i need it
[09:54:50] 10
[09:22:09] Wa.me/255692354947
[09:19:34] Nokia TA1270
[09:19:19] Any one with solution
[09:06:09] Hi
[09:02:15] Hi
[09:00:03] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[08:58:14] you killed your dongle with sharing.
do not worry, first time repair is free and easy.
Use free repair method after sharing https://infinity-box.com/?r=100194
Waiting for your forum post!
[08:49:30] Found 4 files Tecno t920
1. Tecno_ORA_V006_SKU1_20210520_T920D_LE2401_KaiOS
2. Tecno_T920D_LE2401_EnFrSwPoAr_TZ_TIGO_L_20201030
3. Tecno_ORA_V007_SKU1_20210917_T920D_LE2401_KaiOS
4. Tecno_T920_LE2401_EnFrPo_MZ_VODACOM_L_20210901
[08:49:10] you must enter GOOD password
read how to get or reset password https://infinity-box.com/service/
[08:46:23] It\'s Ok
EOL status : Normal ( Less than 80% reserved blocks used )
[08:21:39] Card found : 82154220 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Load IDBase v312457 Ok!
Operation : Reset Settings/Format FS [ v2.34 ]
Mode : FRP [ RESET PROTECTION ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
[07:51:06] My problem admin
[06:36:09] i typed the user name and password but still facing the problem what can be the solution?
[06:27:59] Get Username and reset Password here https://infinity-box.com/service/\r
\r
Enter Username and Password this way - https://www.youtube.com/watch?v=KogYDEkg-O8\r
\r
[06:27:59] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Identify [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.201005.001 V1.61B_B01 release-keys
M
[06:26:35] Tecno t920 NVRAM needed.
[06:11:04] Ok device android version?
[06:02:27] Is it possible
[06:02:18] Software version
[06:02:05] V09
[05:49:20] Found 53 files A02, search limit is 20 files per server
1. Micromax_X640_M200IN_ADBAA022
2. Kgtel_KGTELCE607_D311_KGTEL_EFAPHSA_LCD_7789CTC_9306INX_9300BOE_CAM_SP0821_GC6133_BF3A01_BF3A02_BF20A2_V03_20190523
3. recent_to_do_MT6739_samsung_SM_A022G_11_RP1A.200720.012.A022GDXS3BVB1_RP1A.200720.012_a02
[05:49:01] Version?
[05:02:04] what condition is this right now ???????
[05:01:25] Overall status :
MLC status : Not defined
SLC status : Not defined
EOL status : Normal ( Less than 80% reserved blocks used )
RPMB : RPMB KEY PROGRAMMED [UNUSABLE]
STORAGE : OTP Status : UNLOCKED!
[04:15:28] Hallo how can I remove mkopa on neon ray pro. Anyone help thanks
[03:07:14] Yes
InfinityBoxTalks 2022-06-24
[22:51:49] check drivers
check cable
change usb port
try again
[22:50:55] Already banned
[22:50:30] install latest MTK SoC drivers
change cable
change usb port
[22:49:39] Download latest [BEST] here https://infinity-best.com/support/
[22:48:59] What is the error?
[22:48:19] Nothing found for nextTab A3310
If you will get the file upload it to support with iosFileUploader
[22:47:45] Click here @FlashFileSearchBot and type there phone name. You will get links
[22:47:33] What is your problem friend?
[22:27:51] Trying to repair IMEI SPD but I\'m having this issue
[20:55:54] Mdm Nokia ta1277?
[20:10:24] Admins don’t like this kinda stuff you could get ban
[19:31:48] Just asking sir
[18:58:39] https://chat.whatsapp.com/KqWj75Fv8G4HAz3A0zRbwk
[18:53:36] Is it by cm2 or other tools?
[17:35:08] ESTAMOS ESPERANDO UNA ACTUALIZACION PARA INFINITY BEST 2,,, PORFA YA QUE ES MUY BUENA HERRAMIENTA GRACIAS
[17:12:09] Infinix x657 showing this error
[17:04:06] Samsung A12 network unlocking is possible
[16:48:01] Всем привет нужно прошивка на эту модель
MT6572alps_A3310_nextTab_A33104.4.2__ALPS.KK1. MP7.V1.44
[16:18:37] ZTE S36 stock rom needed
[16:15:44] Okay thanks. But you can\'t help me to resolve my problem ?? I will pay
[16:13:39] Sir, this forum has limits for new users.
You may contact t forum admins to get nore info
[16:03:28] I don\'t understand
[15:45:17] Whatsapp number??
[15:40:13] Ibadan
[15:39:11] Where are u live??
[15:38:46] 🤔 to deliver there might be a little difficult but no probs
[15:36:51] Lafia nasarawa
[15:36:35] Your location?
[15:36:13] Ask sellers https://infinity-box.com/buy/
[15:35:58] Cool
[15:35:07] Nigeria
[15:34:58] Country?
[15:34:43] Dongle
[15:34:31] License or dongle?
[15:28:02] Ta-1385 unlocked by cm2
[15:27:17] https://youtu.be/lxK68TkMEU8
[15:26:01] Cm2 how much now???
[15:23:17] try again in 8 minutes
[15:22:48] It looks like you are trying to make so many posts in a short time.
[15:22:01] select another base/model or DA
[15:04:11] I can\'t post in forum
[15:04:08] Do it with cm2mtk
[14:58:50] How can I fix this error
[14:47:47] Bye for now
[14:46:53] It\'s lie, I can not accept this kind of insult.
Do not ask me for help any more.
[14:44:57] Not answer me
[14:43:22] contact to support via e-mail
[14:43:10] network unlock need 5 credits
[14:43:10] I get my dongle now
[14:42:52] I\'m owner
[14:42:45] Lol
[14:42:04] return it to legal owner
[14:41:31] 0308F98475
[14:41:22] Click here @FlashFileSearchBot and type there phone name. You will get links
[14:41:02] What is the S/N?
[14:40:47] Found 1 file ta-1020
1. N_3_N_3_TA_1020_TA_1028_TA_1032_TA_1038_here
[14:40:47] This error
[14:40:16] misconfig?
[14:40:06] Cm2 dongle stop list
[14:40:05] Call to any seller https://infinity-box.com/buy/
[14:40:00] Pay me 8$ remotely
[14:39:51] What help friend?
[14:39:44] Need credit
[14:39:37] Boss need help
[14:39:13] Make this https://infinity-box.com/?r=100155
[14:38:57] TA-1165 C1 need 5 credits for network unlock
[14:24:21] Help