Infinity CM2, Infinity [BEST] @InfinityBoxTalks 23-Apr-2024 [page 36]
InfinityBoxTalks 2022-06-24
[14:24:11] My cm2 error
[14:14:35] File/nokia ta 1020
[13:30:06] Hellow I need help open my cm2 dongle from stop list
[13:28:25] Hellow I need help open my cm2 dongle from stop list
[13:27:26] File/
[13:11:41] Hang on logo
[13:10:19] Hang on logo
[13:05:24] its stuck and set goes on charging and in ddvice manager port not shown
[13:04:25] https://t.me/InfinityBoxTalks/95689
[13:04:00] yes
[13:00:09] TA1165 need credits or not
[12:32:40] Linux))
[12:32:40] Please do not answer here, Your problem with three PC is very serious.
I just talked to supporters, they arre waiting for your post with problem details.
Post it to support forum
[12:31:25] Click here @FlashFileSearchBot and type there phone name. You will get links
[12:31:14] OS type?
[12:24:07] I have 3 pc i try one by one same error
[12:19:20] Ta 1383
[12:18:42] connection issue
try again as per instruction
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable
[12:18:04] model?
[12:15:07] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
[12:12:54] what was the problem before flash?
[12:12:27] What settings?
[12:11:49] 2 or 3 or 23?
Tell me true story with installed OS and drivers version but not fake words.
[12:10:53] Newset units may have boot problems.
Please check #CM2MT2 boot issues info https://infinity-box.com/?r=100189
[11:53:53] indeed i notice that. my weekend start today. i\'ve already started. i hope you get it😃
[11:49:10] I need solution for this
[11:49:09] Okay
[11:47:35] Soft scanning port automatically. If you press scan, you must select port )
[11:45:25] It could have been done much faster))
[11:35:43] https://youtu.be/vDZs4U0WBuA
[11:18:54] Software log....
[11:18:31] Wipe frome recovery, at first
[11:08:11] Any help please
[11:07:49] Not working
[11:07:45] Nokia c2 ta 1383 frp and screen lock SPD 2
[11:04:37] Nokia G10 after flash with file from support now has no sound at all
[11:04:21] Guys help
[10:58:20] How to change settings
[09:38:09] Model?
[09:33:47] Flash with official rom bro
[09:30:04] Download and install bootpack bro from support
[09:01:41] Re install setup
[09:00:41] Bro i already change 2 3 pc it\'s same problem
[08:57:21] TEAM PLZ WHY AM I HAVING THIS ERROR
[08:56:11] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM10)
MODE : BOOTROM
PORT : 10
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 5FB71C6678490052D53F7C8EE09C5C91
BROM : SecLevel : 0
[08:41:43] Type: Infinity-Box/Dongle [CM2]
S/N: 4025938C
Username: 004025938C
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0152; Expired: 01-Feb-2022
#3: Infinity [BEST]; Firmware Version: 0123; Expired: 01-Jan-2021
#7: Infinity SM; Firmware Version: 0101
Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2.
[08:40:09] What the matter here
[08:37:41] Solution 100% https://infinity-box.com/?r=100196
[08:32:52] koi help nhi phle msg ko dhyan se pad
[08:32:40] Help Karo bhaii
[08:32:15] Support several times asked software logs.
[08:31:03] Try to install from the old module version, and do the same for bootpack version.
[08:30:59] This is your problem, because you can\'t read
[08:30:55] you must post sw log text
[08:30:22] Hang on logo, I flaseing after dead
[08:29:47] logs?
[08:29:38] Help broo
[08:29:18] Yes
[08:29:12] Any solution bro
[08:29:08] Post sw log text to support forum https://infinity-box.com/?r=8
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[08:28:50] Yes?
[08:28:25] Yes
[08:28:18] logs ?
[08:28:04] Infinix hot 7 flashing after dead only port dedected
[07:44:57] what is this MDM explain me
[07:44:01] Yes
[07:35:08] Infinix Hot 10t (x689c) mdm file
[07:34:57] what mean mdm file
[07:34:31] Hot 10t (x689c) mdm file
[06:46:28] Always post sw log text
[06:46:07] Please check #CM2MT2 boot issues info https://infinity-box.com/?r=100189
[06:31:03] https://t.me/+hEZlCWtUEMcxOTBk
[06:17:31] Found 3 files l6002p
1. iTel_L6002P_F6308_9.0_OP_V078_20210604
2. iTel_L6002P_F6308_9.0_OP_V077_20210406
3. iTel_L6002P_F6308_9.0_OP_V074_20210129
[06:16:54] Nothing found for s15pro
If you will get the file upload it to support with iosFileUploader
[06:16:15] file /s15pro
[06:14:38] file/ s15pro
[06:13:49] file/ L6002P
[05:44:36] Try memory tool and wipe frp
[05:26:23] Re-flash it via Odin 3.14.4 and last firmware.
[05:25:10] Samsung A325F after flash scatter file those error occur... Help
[04:58:56] Can’t bypass brom auth
[04:58:43] Vivo s1 new sec patch
[02:52:27] https://www.infinity-box.com/buy/
[02:51:38] Ok
[02:51:37] What\'s app
[02:51:26] 01753934385
[02:51:17] Please call me.
[02:51:04] If anyone sell cm2 dongle
[02:50:36] I need cm2 dongle
[02:50:19] English Only
[02:49:09] Elija invertir en una empresa confiable y de pago rápido que garantice su éxito y no se deje engañar.
https://cutt.ly/vKWeCuU
https://cutt.ly/vKWeCuU
InfinityBoxTalks 2022-06-23
[22:56:37] Investing my cryptocurrency in a transparent and legit company has been my greatest achievement.🥰
www.coindexglobal.com is the best.... You can also partake in this great opportunity today and testify💯
www.coindexglobal.com
[22:52:29] after write file eng firmware redmi note 9s....help
[22:43:55] Ok thanks
[22:40:12] Make this https://infinity-box.com/?r=100155
[22:40:03] How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[22:35:13] My Cm2 is saying dat whats de problem in spd
[22:29:43] Nope nope nope. Be aware and take care less u get ban
[21:35:41] is cm2 allow in sharing usb dongle???
[21:28:03] thanks
[21:18:26] TMRVL4G
[21:00:46] Done already thanks
[20:57:15] https://infinity-box.com/?r=100188
[20:56:26] +
[20:54:10] What is the phone name?
[20:53:40] https://infinity-box.com/?r=100188
[20:52:23] Try several more times, software has auto-learn feature
[20:11:51] Anyway to do that?
[20:11:41] I just want it to appear for easy use and
It\'s a newly purchased dongle
[20:11:10] Yes
[19:46:25] Cm2 Mt2 not showing all select with ur cpu like infinix etc ... anyways what phone u have nd problem ?
[19:43:49] Need to see the models in that section
But not seeing it
[19:37:15] https://t.me/Expart_Unlocker
[19:36:57] https://youtu.be/RcUev5ZfQ3Y
[19:36:35] https://youtu.be/xm86J_4KI24
[19:35:35] https://t.me/Expart_Unlocker
[19:32:50] https://youtu.be/RcUev5ZfQ3Y
[19:32:44] What u looking for I mean whats the problem ?
[19:19:51] I need support for network unlock
[19:12:06] Update
[19:01:15] Not getting all the settings
Amy help?
[19:00:56] Just bought my dongle and this I what I get
[18:24:53] Untick EMI on setting
[18:21:51] Check #CM2MT2 boot issues info https://infinity-box.com/?r=100189
[18:21:51] Admin
What to do here, why am.i getting this error nobody willing to help.
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM32) MODE : BOOTROM PORT : 32 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200 CODE : Merlot TYPE : MODERN [RAPHAEL] BROM : MEID : C07A5E74E571B3733C18F8817683925E BROM
[18:04:42] Have done that almost 4time still same
[18:03:48] Identify again bro
[18:01:28] Please house
[17:57:17] Please I need help identifying x625 and am getting this. What could be the problem and what\'s the solution
[17:56:07] Redo
[17:08:05] stuck exactly here?
[17:07:29] you must install suitable drivers
if you still have a problem with your PC you must use another good PC and good USB cable and good USB port
[17:00:58] https://support.halabtech.com/index.php?a=downloads&b=file&id=614664
Please can someone help me with this link 🙏🙏
[16:05:58] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Load IDBase v312457 Ok!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6757 , SBID : 0x8A00
[16:05:54] cm2 stuck on identifying
[16:05:29] how to remove psw meizu m792h
[15:47:00] I install latest but same thing plz solve this issue
[15:32:45] I want to format/frp Which boot should I use on this phone pliz it\'s TA-1359 SPD
[15:23:39] Android 11.
[15:23:25] Samsung a207f/ds android 111
[15:22:06] what is A20s?
[15:20:37] A20s
[15:19:03] model name?
[15:17:14] how to proceed to remove frp its not working on my side a video to put me on the way🙏🙏
[14:58:58] post sw log text
[14:58:31] You can check official downloads here https://infinity-box.com/support/
[14:49:21] Done after update cm2
[14:46:28] What is this problem
[14:44:41] flach Huawei faild fdl2 where is the problem
[14:27:24] 👌🤝
[14:23:32] Is there any version above 2.34 cm2mt2??
[13:14:10] https://youtu.be/RKQywmIWMPk
[13:00:08] Done
Thank you
[12:58:41] ok
[12:58:34] login
[12:58:23] Register or login ?
[12:52:59] password reset done
you can login now by Method #1 and enter registration code
[12:47:12] Username: 00DDF4291B
[12:46:41] post your username
[12:46:31] no no, it do not work this way.
Online personal support price is 50$ per hour, payment in advance,
[12:45:30] 591 833 223
1k3xj5f8
[12:44:27] you did not told your username :(
[12:43:52] Give me TW id and pass in pm
[12:43:02] No bro
[12:26:59] Is it Ok now?
[12:26:32] Nothing found for SM-A705FN
If you will get the file upload it to support with iosFileUploader
[12:26:31] Check the tagged post
I\'m talking to the Infinity CM2 Support
[12:26:05] Pls help me fix it
[12:23:51] Hello sir
[12:14:11] Yes sure
[12:07:12] Need SM-A705FN U5 TOUCH FIX firmware link please?
[12:07:10] Can cm2 solve infinix demo mode?
[12:06:57] Are you talking to me?
[12:03:50] I got work while am on IDA
[12:03:50] What about Repairing of PSN on SPD devices?
[12:03:48] you understand
[12:03:30] How do i use infinity best to flash Nokia HMD global OY model TA 1034
[12:03:28] Yesterday I installed IDA Pro just for my own sake... then I faced that issue and I have unstalled it. am regretting
[12:03:25] reversing engendering EXE
[12:02:18] Why do you run IDA with Infinity?
[12:02:02] What is the Username?
[12:01:55] Yesterday I installed IDA Pro just for my own sake... then I faced that issue and I have unstalled it.
[12:00:58] What do you want todo with this tool?
c:\\program files\\ida 7.0\\ida.exe
[11:59:44] hi-hi
[11:59:34] I DONT EVEN KNW HACKING
[11:59:21] Perfect
What is the result?
[11:59:04] see...now trying
[11:58:48] Bro...i were on PC since yesterday
[11:58:13] What crack tools tdo you use for your hacking attempts?
[11:57:55] Don\'t worry my dear hacker.
Supporters will reply to you there soon.
[11:54:05] like that?
[11:51:48] I told you must use PC, smartphone is not allowed!
[11:51:04] Done!
Check this https://forum.infinity-box.com/viewtopic.php?p=2895
Use first method!
DO NOT use Alternative method, it\'s for very very experts. You do not need it.
First methd is Ok for you!
[11:48:38] Germiston
[11:48:21] thank you
[11:48:09] then stopped here
[11:48:09] Ok, Wait. I will make some changes for you
[11:47:48] after here
[11:47:41] success?
[11:47:28] methode 2...i started from here
[11:46:31] Perfect!
Method #1 is for experienced people only.
I suggest you to start with Method #2
It\'s easy
[11:45:30] My first problem is solved by following this link https://infinity-box.com/?r=100155
I want now to login forum website
[11:44:46] tell me your issue dear, I will make everything for you right here
[11:44:30] forum registration is not for you
[11:44:18] Leave it.
You do not need support forum, You should solve the problem by easy way.
[11:43:47] Friend, I think this task is quite hard.
Tell me, what is your problem exactly?
[11:43:42] thank you
[11:43:29] A97GRP right?
[11:42:47] Found 2 files Nokia TA 1334
1. Nokia_G10_TA_1334_G10_MT6765_HMD_Global_00WW_11_00WW_1_070_RP1A.200720.011_ROGA_sprout.2021_04_05
2. recent_Nokia_TA_1334_G10_MT6765_HMD_Global_00WW_11_00WW_1_070_RP1A.200720.011_ROGA_sprout.2021_04_05
[11:42:45] Do you see the code?
[11:42:28] i see meaning...now how to get that code?
[11:41:14] Do you see it?
[11:38:12] In Method #1 \"Code from main page\" means what? and how can i get that code?
[11:36:45] At least now you know that Admins are always here and they check ALL posts carefully.
[11:35:19] 😭
[11:35:19] Yes activating service available
[11:35:09] This helps me to solve my problem.
Thank you
[11:33:51] Sory
[11:22:36] Ok
[11:19:18] you have a problem with your smartphone - you can not enter password well with small keyboard.
You must use your PC and copy/paster password
[11:17:59] Nothing found for kg5j
If you will get the file upload it to support with iosFileUploader
[11:17:43] https://forum.infinity-box.com/viewforum.php?f=18
[11:17:25] okey...thank you
[11:16:49] Make this https://infinity-box.com/?r=100155
[11:16:35] Please how much is a year activation for my cm2
[11:15:32] Thank you. But can you quickly check the reply in \"Ticket-ID:1655907604.171 fault.bin 00DDF4291B\" and tell me how to do to solve my problem?
[11:13:02] Not supported
[11:13:00] After unlock this asu
[11:11:29] Oppo a12 imei null suport or no cm2
[10:54:06] I have bad internet conection now(((
[10:53:29] 👍
[10:51:12] I Can give TeamViewer if you want
[10:50:54] I do copy and paste...and error again
[10:50:09] Check login / pass and repeat
[10:49:25] Make this https://infinity-box.com/?r=100155
[10:49:21] Error
[10:49:10] What is the lock type?
[10:49:08] I enter account informations given in my iOS panal
[10:49:02] And?
[10:47:01] https://forum.infinity-box.com/viewtopic.php?t=6011
[10:44:10] Pls
[10:44:08] Hi house pls anybody wit kg5j file
[10:00:43] Using cm2
[10:00:26] Any solution unlock pattern nokia c01 plus TA1383
[09:40:31] https://forum.infinity-box.com/viewforum.php?f=18
[09:32:09] Hello support.
Help me to loging or to register, please. Because what ever i do brings out error
[09:17:27] Help me Tecno pop 5 bd4h
[09:17:11] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM32) MODE : BOOTROM PORT : 32 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200 CODE : Merlot TYPE : MODERN [RAPHAEL] BROM : MEID : C07A5E74E571B3733C18F8817683925E BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM|BL : 0x05|0
[09:07:24] https://sg-earn.buzz/766576821392
[09:00:48] Where are you brother?
[09:00:48] Yes... i know
[08:32:32] Так себе способ. В этом файле написано, что именно мешает запуску.
Вот такое изобретение проверит и скажет, что не так, и само удалит (потом), если надо
[08:31:40] Make this https://infinity-box.com/?r=100155
[08:31:40] Misconfiguration
[08:30:53] need solution plz
[08:22:26] Good Luck
[08:20:21] I killed that phone with cm2 the fix with scatter using same cm2. Untick preloader then flash
[08:18:16] Don\'t flash preloader
[08:16:38] I have the scatter on my laptop. I never save the link.
[08:08:48] hey i want to know how to unlock oppo A3s using cm2
[07:32:00] Trusted source you have?
[07:31:58] Yes
[07:06:18] Flash with scatter dead boot fix
[07:03:54] It\'s U2?
[07:01:06] I flashed official firmware but no hope
[07:00:07] Samsung A32 (A325F) auto restart problem after FRP bypass..
Help please
[05:13:03] Sir is this the latest soc driver for sp2
[03:35:21] Deja de mirar, únete a esta empresa ahora y comienza a disfrutar de tu vida. Me encanta esta empresa.
Haga clic en el enlace para registrarse
👇👇👇
https://rb.gy/oijm7v
https://rb.gy/oijm7v
[01:23:55] Just install only and run your modules
[00:05:35] Fault code: 51
Ticket-ID:1655907604.171 fault.bin 00DDF4291B
InfinityBoxTalks 2022-06-22
[22:02:07] Install latest SoC drivers SPD/UNISOC/UMS9117 https://infinity-box.com/support/
[22:00:46] Click here @FlashFileSearchBot and type there phone name. You will get links
[22:00:40] Click here @FlashFileSearchBot and type there phone name. You will get links
[22:00:30] Post sw log text to support forum https://infinity-box.com/?r=8
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[21:59:47] How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[21:59:09] use free repair method after sharing https://infinity-box.com/?r=100194
[21:58:38] Click here @FlashFileSearchBot and type there phone name. You will get links
[21:58:31] Click here @FlashFileSearchBot and type there phone name. You will get links
[21:58:17] CM2 do not run if your PC infected with virus.
Check your PC with free antivirus https://free.drweb.com/download+cureit+free/?lng=en
How many viruses found?
[21:57:44] CM2 do not run if your PC infected with virus.
Check your PC with free antivirus https://free.drweb.com/download+cureit+free/?lng=en
How many viruses found?
[21:56:57] Why don\'t you read text given by software?
[21:56:21] you must use support forum https://infinity-box.com/contact/
[21:55:42] you are fired and your telegram support is closed
you must use support forum from now
bye
[21:54:31] this time your stupid debug attempt can be fixed this way https://infinity-box.com/?r=100195
next time repair will be paid
good luck
[21:15:11] I don\'t see anything funny about it. these are the realities
[21:14:27] In a normal way - you need to specify the model, otherwise I threw off the photo, at an angle, and of poor quality. And guess. Established psychics on vacation. And admins have not yet learned to guess. Therefore, think and have elementary respect.
[21:09:41] I mean which model?
[21:08:12] Use Diag Mode
[21:06:06] 😂😂😂
[21:04:56] Maybe admins are people too? And do they want to sleep? Or should everyone sit 24 hours a day and answer?
[21:03:03] Model?
[20:47:06] Password 🔑
[20:46:57] Nokia c01
[20:46:28] Why admin not help or respond again
[20:45:36] And am also having this issue
[20:20:34] Please house which tool can I use to reset hmd Nokia phones that doesn\'t enter recovery
[19:49:45] Check operating system for viruses
[19:48:50] Have uninstalled and download then install same thing
[19:45:17] Read the text and do what is written
[19:40:13] Please I need help on this
[19:37:56] Please I need help my cm2 just started showing file damage or manipulated obtain new version from www.infinix-box.com
If you see message again after fresh install probably, your machine is virus infected.
This even after i activated my window and I had uninstall and download another one reinstall same thing
[19:25:14] Huawei y336-u02
[18:58:29] South africa
[18:35:08] I hve install mine but still do i hve enable something during the installation?
[18:22:48] \"UK Edition\" status Off
[18:22:24] Diagnostic code : 66
[18:21:59] Make this https://infinity-box.com/?r=100155
[18:21:59] Box/Dongle misconfiguration
[18:21:43] I have any problem with my CM2 dongle
[18:21:21] Hi! Guys
[18:18:48] Chai but why
[18:08:19] This days cm2 behave like this mostly to legacy phone
[17:46:48] boot Huawei y336
[16:47:15] Pls admin help
[16:20:09] Thanks admin
[15:58:39] Hi
[15:57:02] I flash it with official firmware
[15:46:53] Operation : SP Unlock [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
>>> ERROR : Protocol HandShake failed!
>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
[15:33:46] 1. Use FLASH MODE but not DIAG https://forum.infinity-box.com/viewtopic.php?t=5629\r
2. Install latest SoC drivers SPD/UNISOC/UMS9117 https://infinity-box.com/support/\r
\r
You must check 1. and 2. twenty times before read 3.\r
\r
3. It may be seriously damaged phone (that is not supported yet)
[15:33:46] Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.370_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P4_Debug
Project Version: pike2_pub
BASE Ve
[14:55:09] Anyone with Gcam app or link
[14:45:39] Ticket-ID:1655908973.768 fault.bin 00E78E5681
[14:44:38] Fault code: 62
[14:38:51] A037G no TP. Frp cheap service inbox
[14:20:56] 🇹🇷
[14:16:19] Nothing found for Alldocube
If you will get the file upload it to support with iosFileUploader
[14:15:38] https://coindexglobal.com
[14:15:19] your password is wrong
use good password or reset https://infinity-box.com/service/
[14:14:06] @cm2_tr
[14:08:02] Click here @FlashFileSearchBot and type there phone name. You will get links
[14:07:44] select another loader!
[14:07:28] you may try to flash
but it may be faulty emmc chip
[14:06:48] wrong password
use good password or reset
[14:04:57] Nothing found for tecno kg5j
If you will get the file upload it to support with iosFileUploader
[13:50:28] I need this software
[13:18:17] Thax
[13:14:21] Hello i have a probleme with cm2sp2 whene i try to use it it say server error acces denied authentification
[13:09:37] Turkish support Please 😊
[12:35:26] What errors
[12:04:58] Huawei p8 lite stuck on logo
[12:02:54] Try to rest frp with cm2 itel w6502. This error
[11:52:26] sellers https://infinity-box.com/buy/
[11:36:23] Full flash the phone with another PAC file
[11:27:00] Anyone
[11:26:52] I year activation infinity cm2
[10:31:39] Nokia 6100 security damaged, how to recover on Best?
[10:26:54] Inbox price..ask code
[10:12:38] Server unlock
[10:11:47] Admin unlock code available?
[09:39:57] then use FLASH mode
or another PC or cable or usb port or another windows
if your friend can do it - it means his PC has good drivers and good PC
[09:38:09] Downloaded drivers and installed if its give same problem then?
[09:35:56] Any solution on this phone
[09:35:31] I don’t have best dongle
[09:35:04] I do not remember, you may try with [BEST]
[09:34:00] Guys help here
[09:33:23] 1. Use FLASH MODE but not DIAG https://forum.infinity-box.com/viewtopic.php?t=5629
2. Install latest SoC drivers SPD/UNISOC/UMS9117 https://infinity-box.com/support/
[09:30:02] 4 phones came no damage nothing only sim lock i did 100 phone before if you want i can send u the list from infinity work history i gave same phone to my friend unlock done
[09:27:30] Nokia Ta-1057 sim unlock supported??
[09:19:35] 1. Use FLASH MODE but not DIAG https://forum.infinity-box.com/viewtopic.php?t=5629\r
2. Install latest SoC drivers SPD/UNISOC/UMS9117 https://infinity-box.com/support/\r
\r
You must check 1. and 2. twenty times before read 3.\r
\r
3. It may be seriously damaged phone (that is not supported yet)
[09:19:35] Summary for everybody for Init failed: Wrong input data
1. Use FLASH MODE but not DIAG https://forum.infinity-box.com/viewtopic.php?t=5629
2. Install latest SoC drivers SPD/UNISOC/UMS9117 https://infinity-box.com/support/
You must check 1. and 2. twenty times before read 3.
3. It may be seriously damaged phone (that is not supported yet)
[09:08:37] if somebody told you that it\'s a problem with username it was a bad joke
[09:08:17] another way: fix your PC finally and install latest SoC drivers
[09:07:53] another way: use FLASH MODE as was adviced earlier
[09:07:13] > Init failed: Wrong input data
phone is damaged
not supported yet
[09:04:26] I posted yesterday
[09:01:51] This is the text
[09:01:43] Card found : E1CA285D , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.2010
[09:00:16] as you wish boss, customer is always right.
tell me what to do
[08:56:20] where is the text?
[08:52:47] Then diag mode
[08:52:42] They will tell u flash mode
[08:52:29] I posted in the group also this things
[08:52:02] You can cut and paste text logs simple
[08:50:42] Then
[08:50:29] download from telegram page for free
[08:50:02] Don\'t have
[08:49:20] telegram desktop exe
[08:48:49] Thank you cm2 besssttt
[08:47:30] you must post only text
[08:45:43] CM2SP2.exe
[08:43:10] How I do boot a33 plus itel
[08:42:04] answered long time ago
[08:41:50] nice
[08:40:28] Page 17
[08:40:25] Spd update
[08:40:19] Gsm forum
[08:38:30] where?
[08:38:04] Even in gsm forum i post
[08:37:52] Already post
[08:37:13] post all software log text
[08:36:43] Not phone problem i unlock with cm2 but my friend cm2 account ohk but not unlocking phone also after unlock i check it will show its unlocked in my cm2
[08:33:13] account ok
phone problem
[08:30:31] it may be that phone memory content is seriously damaged. No way for now.
Wait next sw release
[08:29:24] Mi Account info https://forum.infinity-box.com/viewtopic.php?t=3947
[08:28:40] Make this https://infinity-box.com/?r=100155
[08:28:18] try with another base/model or DA selection
[08:24:17] How to login to Infinity server https://infinity-box.com/service/
[08:22:11] server is on😉
[08:19:07] LOGIN TO ACCESS THE SERVER
[08:13:48] You can transfer my credit to another account because mine not working unlocking
[08:08:36] server requires good user and pass to pass or complete the process or job
[08:04:51] Nvdata?
[08:04:40] ?
[08:04:39] Login or
[08:04:35] ???
[08:03:34] check
[07:48:43] 🆘
[07:48:18] Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.460_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P4_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P4
HW Version: sc7731e_modem
CMP_Time : 08-24-2021 17:58:44
MODEM TAG : MOCORTM_17C_W21.11.2_P4_Debug_FM_BASE_17C_W21.11.2_P4_sc7731e_modem_pike2_
[07:43:32] how dissable mi cloud mtk phone
[07:36:19] Make this https://infinity-box.com/?r=100155
[07:36:19] How do I fixed
Smart-card misconfiguration! Contact to support !
[07:31:47] Show us what you\'ve tried and failed.
[07:28:12] Best tool 🔧 👌 🙌 👏 👍
[07:28:02] How do I fixed
Smart-card mid configuration! Contact to support !
[07:19:37] AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMMC: CID : 150100445636444242027840E4A888C9
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445636444242 : PRV : 0x02
EMMC: VEN : SAMSUNG : DV6DBB
EMMC: SNN : 2017518760 ( 0x7840E4A8 ) , MF : 8/2021
EMI : DEV : FireFly
EMI : SRC : preloader_x6819_h692
EMI : CNT : 0001
EMI :
[07:15:42] copy sw log text
[07:15:18] https://infinity-box.com/?r=100193
[07:13:00] After \'identify/connect\' my device(tecno ch6) has no response(not in PC\'s Device Manager), why is that? Could anyone help me
[07:12:45] ?
[07:10:42] Ah okay sir thanks for the information 🙏
[07:08:05] just checked, it was sony service delay. You must wait
[07:07:48] there is no direct link
you can order from any seller https://infinity-box.com/buy/
[07:06:35] Sorry i have another question, how if i want to buy s1 qunlock tool from infinity tools? Do you have a web buy link or something?
[06:59:41] You are welcome.
this tool is not Infinity tool so first step - check your username with the seller.
We can check only usernames that was sold via Infinity Online Service
[06:56:29] Okay, i bought on martview I think the one here is the same as the one sorry for interrupting your time 🙏
[06:53:32] This username is not found in Infinity Online Service database, it looks like you bought it somewhere else.
Please ask your seller for support regarding this username.
[06:51:08] sonysFPVhd
[06:50:19] https://www.youtube.com/results?search_query=cm2+enable+imei
[06:49:27] Have you found it?
[06:48:57] What is the username? copy text
[05:51:37] Okay ill be wait it
[05:50:47] but wait for other supporters will tell you exactly what is the issue
[05:50:15] look like server off
[05:48:35] Sorry for interrupting your time, can you help me when i try to unlock my sony xperia 1 device i was got stuck on this eror 144, already wait 1 night but still got eror
[05:46:50] Any version any module. Mt2 or mtk
[05:39:58] Ok
[05:34:04] you can try downlaod here
[05:33:58] https://www.needrom.com/download/gionee-f6/
[05:33:28] Nothing found for gionee f6
If you will get the file upload it to support with iosFileUploader
[05:33:20] Please help Gionee_F6 flash file
[05:32:10] inbox me
[05:31:29] Please help Gionee_F6 flash file l8nk
[05:29:47] Look in files telegram this group. Or support infinity
[05:27:55] Link tool
[05:11:45] Ok... Please anyone have infinix X670 signed firmware, i downloaded 2 (one from Halabtech) but table mismatch means not signed,
Even SWDaftersales tool said Da invalid, CM2 table mismatch.,. so it seems not signed firmware.
Or any trick to remove Demo Mode in this X670.
Help me brothers 🙏🏼
[05:07:25] Haw remove MTN kg lock form tecno spark 5 air kd6
[05:06:20] give us the download link
[05:03:52] Link?
[04:34:04] Found 1 file samsung scatter
1. recent_to_do_Samsung_A326U_MT6853_Android_scatter
[02:57:51] Nokia rm-1111 network unlock
Any ideas
[01:18:05] V2120
[01:14:57] Vivi Y15s need TP please
InfinityBoxTalks 2022-06-21
[23:44:35] P40 LITE clone after FW read from another fone hangs on logo after flash. Any help
[23:36:56] With the V13 version, it works normally with the IMEI sound and everything is fine, but with the sound problem at the time of the call it does not work, but with the V12 version without IMEI works with the IMEI files and the network turns on and off. It is possible to cooperate and help from the distinguished and giant team members
[23:35:41] 9.0
[23:35:11] 9
[23:33:31] I have the protection files, the official right, they were pulled out via cm2, I did not return them, the old problem returns, it turns off and flashes when I put the recovery mode
[23:32:09] I tried cm2, it doesn\'t work, is there a solution?
[23:30:43] redmi note 10 5g repair imei
[22:49:05] Check all software Tabs, you will see the buttons
[22:39:24] I see all results yasterday but cant solve problem iwant to repair imie direct from cm2 please ifyou understand that. Help me
[22:39:05] Any
[22:38:16] Any idea
[22:37:59] SmartInfo : Failed to detect!
Info : Device is not supported yet!
[22:37:54] Oppo cph2230
[22:37:18] C Quoi le problème
[21:46:49] Tick Force Brom, reset battery then hold vol+ vol- cable
[21:37:18] Try login and connect internet
[21:34:22] or da not work mell
[21:33:58] maybe driver
[21:33:07] I think you should wait for admin to help
[21:27:11] HTC Desire 728 dual sim
[21:23:26] Model?
[21:23:15] Try test point
[21:17:28] some time manual select work beter tested in cm2scr
for many cpu cannot read backup in auto
but with manaul select worl correctly
[21:15:23] What does it mean ?
BROM : 0x00002003 : DA SEND ERROR!
[21:04:36] Card found : xxxxxxx
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
UserName and/or Password not set! Can\'t continue!
Load IDBase v312457 Ok!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM19)
MODE : PRELOADER PORT
PORT : 19
Waiting BOOT ack ...
PRELOADER : ACK confirme
[21:01:46] log text?
[21:01:39] not work
[21:01:20] use built-in default loaders
in case of problem post here sw log text
[21:00:42] how find a Compatible da with mt6753 fro HTC Desire 728 dual sim
for frp need
[20:47:58] Thank You So Much 😊
[20:47:20] Ok bro
[20:44:36] Country?
[20:43:05] Ok Iwill visit Tomorrow
[20:42:05] In the case of DAA Protection You can bypass it by loading a custom or slightly Modified DA, but in case of SLA You can’t load a DA File without completing the SLA challenge which is done through the Special account called Authorized oppo ID or account that are given to service center for repairing oppo devices.
[20:40:24] same problem sir
[20:36:56] Dongle
[20:36:43] That Means Sir..?
[20:35:12] SLA Protection
[20:34:46] set another EMI value or try with another base/model or DA
[20:30:05] Untick local sla
[20:24:33] I test in deference phone but not working any solutions
[20:20:42] I have a Samsung a325f test point not working
[20:19:41] Hello
[20:08:01] How Can I Solve It Sir..?
[20:05:07] RMX 2151
[19:39:16] Click here @FlashFileSearchBot and type there phone name. You will get links
[19:35:25] Click here @FlashFileSearchBot and type there phone name. You will get links
[19:35:22] Click here @FlashFileSearchBot and type there phone name. You will get links
[19:05:30] Friend, use another base/model or DA or another firmware
if you still have a problem post sw logs
[19:05:18] Nokia ta-1384 password reset support
[18:58:14] Still Same Prblm Sir
Plz Solution Sir
[18:46:15] Help i was got problem went to unlock sony devices with eror code 144, is the server down?
[18:02:31] Found 2 files hurricane
1. Hurricane_SP7731E_Hurricane_Storm_8.1.0_Hurricane_Storm_V09_20200423_OPM2.171019.012_Storm
2. Evertrade_MT6580_evertrade_Flame_Plus_8.1.0_Hurricane_Flame_Plus_V07_20190905_O11019_Flame_Plus
[17:33:42] Nokia ta 1298 MDM solution
[17:32:33] Found 17 files infocus
1. Infocus_Infocus_M535+_G42_627A_0_00WW_A04
2. Infocus_Infocus_M808_ZM1_518H_0_00WW_A05_Signed
3. Infocus_Infocus_M330_D77_438T_0_00WW_A04_Signed
4. Infocus_Infocus_M530_G20_432E_0_00WW_A03_signed
5.
[17:29:46] Found 11 files x-tigi
1. X_Tigi_MT6580_X_TIGI_V8_8.1.0_V01_20181222_163917_O11019_k80hd_bsp_fwv_512m
2. X_Tigi_MT6580_VSUN_X_TIGI_Photo_P16_8.1.0_V13_O11019
3. X_Tigi_X_TIGI_3308_FLYCOM61D_M182_XTJ_3308_PCB01_gprs_MT6261_S00.M182_X809_V01
4.
[17:23:48] Nothing found for joy8
If you will get the file upload it to support with iosFileUploader
[17:21:54] Nothing found for x-tigi joy8 mate
If you will get the file upload it to support with iosFileUploader
[17:19:29] Firmware infocous vzh
[17:19:06] Help me
[17:12:14] MTK easy buy permits solution???
[17:11:00] Found 6 files Samsung A02
1. recent_to_do_MT6739_samsung_SM_A022G_11_RP1A.200720.012.A022GDXS3BVB1_RP1A.200720.012_a02
2. Samsung_MT6739_samsung_SM_A022F_10_QP1A.190711.020.A022FXXU2AUF1_QP1A.190711.020_a02
3. Samsung_MT6739_samsung_SM_A022F_11_RP1A.200720.012.A022FXXU2BUK3_RP1A.200720.012_a02
[17:09:38] How???
[17:01:57] if bootloader locked - wipe from recovery
[17:00:12] try, if bootloader unlocked
[16:59:50] fastboot -w in soft
[16:58:16] Nokia c1 2nd edition factory reset
[16:57:24] Any drivers I need?
[16:57:00] not
[16:56:50] Or Just a other tab work only?
[16:56:25] You see in my case I can\'t see the port on my tool
[16:55:39] I know is just simple but let me know how to actually run it
[16:55:36] Very fast
[16:55:36] A20s reset frp 2022 Done successfully
[16:55:02] But still is not picking up any device on adb mode 2 days now
[16:54:55] just download and run and enjoy \\
[16:54:30] yes, but dongle not needed
[16:53:27] Do It work with cm2 or best
[16:47:40] Actually my whole tool is not picking up any device
[16:43:50] Rmx3263
[16:41:09] Thank God 😊 I have fix my oppo problem
[16:30:23] My friend, please don\'t be lazy, alwys use search before make posts.
This time I give you hint https://www.youtube.com/results?search_query=cm2+Lenovo+a7000a
[15:59:06] Any body answer me
[15:55:44] Nothing found for movitel 6246
If you will get the file upload it to support with iosFileUploader
[15:54:31] Found 41 files itel, search limit is 20 files per server
1. Pritel_Pritel_P16_COOLSAND_SC6533G
2. Vanzo_MT6580_VANZO_C10_8.1.0_OUKITEL_C10_V4.0_20181101_O11019_wd359bf_CLEAN
3. Navitel_NAVITEL_T700_3G_NAVI_MT6580_7.0_K706A.N0.V10.8.CF_V07.2278_NRD90M_joyasz8321_tb_n
4.
[15:53:20] You must enable adb mode by *#0*#
[15:51:38] for QCOM CPU Sams - use this
[15:51:14] you always must install latest version
[15:49:57] Cm2sp2 boot pack v.29
[15:48:29] Adb or mtp
[15:48:08] Thank you
[15:47:53] Ok
[15:47:14] install CM2SP2 boot-pack, loaders ate rhere
[15:46:22] Anyway Welcome Boss
[15:46:12] Please check this web page from time to time https://infinity-box.com/news/
[15:46:09] Please help me DA BOOT
[15:44:53] Ok
[15:44:33] not all models supported, because samsung closing bugs) and some model in security patch after 01.04.2022 - not work *#0*#, and some mtk samsung not work too
[15:44:29] I\'m not depending on it. I was searching something on it. I can tell you if if want to know
[15:41:23] Yes someone ask me share
[15:40:56] For all Enabled ADB. Let me repeat again. For all Enabled ADB mode
[15:40:52] 😂 this is my work)) I know how it work))
[15:38:57] Great
[15:38:26] Not for all. if *#0*# works - ok, else - if qcom- I add few samsung models via TP. U can use it
[15:32:32] Yes for all Sumsung ADB Enabled
[15:32:29] Lenovo a7000a. Repair imie
[15:27:22] Lenovo a7000a. Repair imie
[15:23:42] Try to relock bootloader
[15:22:46] ???
[15:21:32] When update come Qualcomm cpu
[15:21:28] Do you need dongle or license updating?
[15:20:30] Work about more software features is in progress, new software will be released as soon as it will well tested.\r
\r
Please tell us list of required supported CPU types and functions
[15:20:30] Cm2 Qualcomm update ???
[15:19:01] https://infinity-box.com/service/
[15:18:46] Please how to get user name for my cm2
[15:18:16] Device details?
[15:13:30] Good... Is it applicable to all Samsung?
[15:12:09] Very fast
[15:10:13] A20s reset frp 2022 Done successfully
[15:08:42] Do you know support forum location?
[15:08:22] Sir, As I can see you have a serious problem with boot options.
I suggest you to create a separate thread at support forum and explain all your tries all by one
[15:07:06] I used several ones but didn’t work. What else will I do
[15:06:33] I did
[15:06:19] select another base/model or da type
[15:05:41] TECNO kg7h does not pass boot for frp
[15:04:32] Please help. It does not pass boot
[14:38:52] Found 40 files joy 8, search limit is 20 files per server
1. Bravis_MT6580_A552_JOY_Max_A552_JOY_Max_6.0_MRA58K_A552_JOY_Max
2. Bravis_MT6580_Bravis_A503_Joy_hct6580_weg_c_m_6.0_Bravis_A503_Joy_V0.7_20161112
3. Bravis_NVM_Bravis_A503_Joy_MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P7_1_wg_n_eMMC
4.<
[14:26:42] Logs
[14:25:25] Jailbreak
[14:10:35] which ios
[14:07:36] Nokia 2.4
[14:07:33] Admin kindly help
[14:06:00] Connect to itunes software and follow process
[14:00:56] How to go online
[13:59:54] juast need to reset how to?
[13:58:45] Okay how we go unline
[13:58:06] Online or easy jtag
[13:57:53] No Qualcomm
[13:57:39] Open and check mtk ?
[13:56:38] Which box support this phone
[13:43:32] run Infinty CM2SP2.exe and do the job
[13:38:00] TA1359 network unlock
[13:37:51] Its model supported
[13:36:51] Try here @FlashFileSearchBot
[13:36:51] you have file flash redmi note5a?
[13:34:35] use cm2 QLM
[13:31:00] how to flash redmi note 5a by cm2?
[13:22:45] Okay
[13:14:40] Any solution 😉
[13:05:43] No idea
you can try with another loader selection
[13:04:57] select another model or loader
[13:04:20] no manuals yet
it\'s free tool, try it and post your result
[13:02:47] Nothing found for Tecno BD2D
If you will get the file upload it to support with iosFileUploader
[12:39:15] Help tecno bd4h
[12:38:39] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM32) MODE : BOOTROM PORT : 32 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200 CODE : Merlot TYPE : MODERN [RAPHAEL] BROM : MEID : C07A5E74E571B3733C18F8817683925E BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM|BL : 0x05|0
[12:37:39] Pop 5
[12:29:00] Yes all done
[12:10:55] Tecno BD2D firmware needed
[12:00:28] I did but still
[11:58:47] دوستانی که تمایل به
همکاری در زمینه فروش VPN و پروکسی
دارند به من پی ام بدن
[11:56:28] Fast check. How to make use of it
[11:46:04] can read
[11:44:18] How to fix CM2SP2 connection issue https://infinity-box.com/?r=100192
[11:44:18] Device Connected!
BootVersion : SPRD3
Boot : PAC : j106_32e_fwvga_taiyi_sp111C_sfc_fakeflash_pmicCharge_64_8_smr_user_o_new_2021_11_16_16_07.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
>>> ERROR : FLASH FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
i need to flash thise phone,NEON RAY
[11:43:53] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Safaricom : Neon-Ray-Pro
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW :
[11:43:51] daed phone can info
[11:43:40] Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART
[11:43:15] if flash can not be written it may be faulty emmc chip
[11:42:58] FULL text
[11:42:54] 1 phone daed bro
[11:42:04] Boot Done!
Device info :
Product Brand : Safaricom
Product Device : NEON_RAY_PRO
Product Model : NEON_RAY_PRO
Product Name : NEON_RAY_PRO
Patch Level : QP1A.190711.020
Display ID : SFC_NEON RAY PRO_10.0_V14_20210928
Ver. Incmt : 37158
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-09-05
Build Time : 28.09.2021
Product Info : NEON_RAY_PRO
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Manfct : Safaricom
NVMng : SecurityInfo
IMEI[1] : 35247811125313
[11:41:12] what was the problem before flash?
[11:40:36] sw log text?
[11:38:57] None of them worked. Same error still
[11:21:02] and flash black show error
[11:20:44] i read form working phone
[11:20:31] wiko y82 k630
[11:14:40] Its the latest windows 10 updates just uninstall them ... i can guide you
[11:11:25] please SM-T590 and SM-T585 no factory reset and no download mode
[11:09:58] drivers, another pc, another cable, another usb port
[11:09:35] https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/index1422.html#post14559660
[11:07:23] Click on this bro
[11:06:05] Still having challenges on ta-1385 connecting to diag, have installed latest drivers
[11:01:32] I created boot fg for Infinix x655c I want to post is here for people benefits.
[11:00:25] be sure to install latest SoC drivers
more info you can see here https://forum.gsmhosting.com/vbb/f296/
[10:59:30] Select another loader
Also you may install boot-pack and check model there
[10:58:59] Help me unlock ta-1385, i tried but not switching to svc mode. If i press boot key it shows this👇
[10:57:52] Itel a55 flash failed
[10:52:40] Okay
[10:51:21] if your phone is completely dead you are free to make everything.
for best results I suggest you make post to support forum with full info about initial problem, firmware version, sw logs etc.
[10:50:27] More reports are here https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/
you can make search for your model name
[10:48:25] I flash phone with the same model file from recovery. Can I flash with deferent file
[10:43:31] Nothing found for k310im
If you will get the file upload it to support with iosFileUploader
[10:37:48] try another file
[10:37:21] I gusess it\'s a result of some kind of HW difference for this unit in compare with previous same name units
[10:37:19] Have done it several times but still
[10:34:08] balance: 2
need: 5
How to recharge Infinity Account
Find a Seller near you
Send Infinity Username to Seller
Order Infinity Credits
Wait some time. Recharge time depends on Seller
[10:33:23] use another base/model or DA or another firmware
[10:31:11] Disconnect all other dongles
Connect only Infinity
run CM2MT2.exe
Is it Ok now?
[10:29:05] if you forgot password and still can not Sign In read this https://infinity-box.com/service/
[10:27:52] you may check the reboot reason https://www.nirsoft.net/utils/blue_screen_view.html
[10:24:09] Nothing found for Chili LA-V11
If you will get the file upload it to support with iosFileUploader
[10:23:54] Ok
[10:22:39] Use default built-in loaders.
result?
[10:21:51] Have you tried to flash or reset?
[10:14:37] select FLASH mode but not DIAG
[10:09:27] Read error mеssage
[10:09:23] I\'m doing network unlock but not successful
[10:09:23] select FLASH mode but not DIAG
[10:09:23] Trying network unlock
[10:09:22] Read this)))
[10:09:22] Can cm2 hard reset this nokia TA-1383 Unisoc SC9863A
[10:09:22] C10 nokia why is showing this
[10:04:17] Please help. New cm2 user
[10:02:58] Infinix x5515 nvram damage need urgent solution please
[09:54:30] Remove Smart-Card from this Card-Reader
Inset it to another reader
is it works?
[09:35:56] Death
[09:23:34] Sorry, x6511E
[09:19:59] Any help here?
[09:19:23] Can cm2 hard reset this nokia TA-1383 Unisoc SC9863A
[09:16:59] Infinix X6511C. Not in cm2 sp2
[09:16:06] supporters please help my old card was damage and I bought new card they transfer all my activation to the new card but I cant use it , my s/n E2A82789 please check I have send email help@infinity-box.com
[09:15:52] is there a global firmware version for this model? Chili LA-V11
[09:05:25] If anyone has wiko access files, contact me. willing to pay a high price
[08:57:54] try now bro no have
[08:57:11] Try here @FlashFileSearchBot
[08:57:11] WIKO Y82 W K630 any one have file i want buy
[08:40:28] Use another smartcard reader
[08:38:57] I have no idea what else to try
[08:33:08] There is only 2 firmwares online... And i download all, the same error
[08:32:00] Look for other firmware
[08:31:31] You are
[08:31:08] Desirable
[08:30:52] بادمجون 🍆
[08:30:22] You can get login and pass using download manager
[08:29:58] Did all the drivers restarted PC still no change
[08:29:10] You guy
[08:28:40] Even after untick Update PMT still show mismatch...
[08:27:52] MTk Must be supported
[08:27:14] Hi realme rmx3085 support with cm2?
[08:26:11] i have cm2 and infinity this one is related to infinity
[08:22:40] hi there can u help me how can find my username and password,
[08:20:56] All drivers here on support
[08:20:42] https://dl1.infinity-box.com/00/pub/?dir=drivers/
[08:20:06] Re-install drivers at first.
[08:18:15] Have the dongle
[08:18:10] Yes ido
[08:16:44] Du You have infinity cm2 dongle?
[08:15:50] Hey there people i have issue with cm2mt2
[08:01:10] Remuve this and repeat
[07:56:42] This come up when i try to flash this infinix X670, and when i click Yes will flash succesfully but phone will not power on again until i flash backed up firmware.. Any solution?
[07:54:22] Why This Error Sir
[07:51:12] The all previous model i removed by flashing latest firmware, but this when i flash went off
[07:50:47] always send complete logs
[07:50:07] Process failed :62 order failure
[07:49:46] But now the phone back to life after found a computer that backed up security automatically 👍
The problem now is to remove or disalble DEMO MODE
[07:47:55] Infinix X670..
[07:42:50] Model?
[07:38:27] When i try to write original imei i got this error...ticked and unticked local sla
[07:37:22] Operation : Repair Security [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM84)
MODE : BOOTROM
PORT : 84
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6781 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Lagrange
TYPE : MODERN [RAPHAEL]
BROM : MEID : 82C61A94EA607ECAEA7AD1C1DFB9C275
BROM : SecLevel :
[07:19:16] Please help. TECNO spark 8C NVRAM file
[07:13:51] what is see here, only vivo support reset data safe 🤦♂
[06:58:04] Got credit everything i change password also but still same
[06:56:24] Still same before i open so many phones
[06:55:41] Still same
[06:53:24] tick on diag mode untick fast mode repeat
[06:53:02] This phone i open 100 times in diag mode
[06:52:34] hallow sir i need BEST licence for this dongle E2A82789 I have request it for 2 days not get my e-mail billiysigoo@yahoo.com
[06:52:33] Same
[06:47:36] Try to unlocking in spd2 sim lock showing this error
[06:47:14] Card found : E1CA285D , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.2010
[06:38:54] hi there is it possible to write flash ta-1017 via CM2?
[06:15:19] Help me, what is this error.
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM32) MODE : BOOTROM PORT : 32 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200 CODE : Merlot TYPE : MODERN [RAPHAEL] BROM : MEID : C07A5E74E571B3733C18F8817683925E BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SD
[06:11:09] Will show logs after few moments
[06:09:59] The problem was driver, imanage to flash but after flash then phone dead 😭
Then after dead, i backup firmware from another phone and revived my phone 👍.
Another problem, basebwnd is Ok but imei null, tried to write imei but failed..
Anyway... My original problem is \"DEMO MODE\" so that\'s why i tried to flash to remove demo as i did for another models before, but unfortunatelly this one went off after flash... I will paste logs here after sometimes.
[06:09:58] plz help
[06:09:50] sir not flash
[05:56:34] not boot
[05:48:04] sir help
[05:41:42] help
[05:33:55] Vivo y73 da error singal
[05:13:02] Full softt log, please
[05:11:53] Do hard reset and see results
[04:41:17] Please 🙏
[04:39:10] I have the same problem with Oppo A5s since yesterday.. I flash the phone but still reboot itself
[04:22:15] Write backup))
[04:21:26] yes. imei becomes 00000000 after flash
[04:16:56] spd?
[04:12:41] REALME C21Y imei repair?
[04:06:15] Why many OPPO after safe format with cm2 reboot itself?and you must full flash after?
This option for safe format with cm2 infinity team can check how to remove it because it gives only dead boot or not work even old mtk phone not support .
[03:11:22] Yes) it\'s free)) But .. you need to work a little😂😂😂
[01:40:25] What si the estimated firmware version?
[01:05:07] Looking for Huawei p40 lite clone firmware. Mtk 6580
InfinityBoxTalks 2022-06-20
[22:56:03] I do not see source code inside archive package so I guess answer is no.
[21:48:10] source code is also free?
[21:41:08] i will complete widows update and tell you what happen
[21:40:08] Just repeate operation after pc reboot
[21:40:00] Try here @FlashFileSearchBot
[21:40:00] Do you need file for it?
[21:39:37] Actually no idea but try to reboot PC and boot phone again.
Let me know about results
[21:38:52] Can U try connet it to https://dl1.infinity-box.com/00/pub/?dir=/software/&uid=19164&file=InfinityBox_install_CM2QLM_v1.16.7z ?
[21:38:20] why i see this error
[21:38:06] Post sw log text to support forum https://infinity-box.com/?r=8
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[21:37:17] Please check #CM2MT2 boot issues info https://infinity-box.com/?r=100189
[21:31:06] Not all models are supported for safe reset yet.
Check your model here https://forum.gsmhosting.com/vbb/f296/reset-without-lost-user-data-write-here-success-reports-2997627/
and here https://forum.gsmhosting.com/vbb/f296/oppo-lost-data-after-safe-format-2997569/
post your report to forum
[21:16:31] Qualcomm SDM450 Snapdragon cpu?
[21:15:00] Password problem
[21:14:40] Password proble
[21:13:30] Oppo A7 CPH1903e password
[21:10:56] https://dl1.infinity-box.com/00/pub/?dir=/software
[21:10:38] https://dl1.infinity-box.com/00/pub/?dir=/software/other/sm-client2/
[20:56:01] Is credit
[20:54:24] Mobeil sutup box give me
[20:51:40] By network unlock code OR use other samsung products. For example \"Samsung unlock tool Laelo\" with infinity credits
[20:43:47] How to unlock network locks
[20:34:10] CM2 v2.34 division by zero on Redmi 9i solution people help me
[20:22:36] I want to unlock the phone screen, but I do not want to lose information
[20:21:53] Hello, what is this part of her job?
[20:17:01] ،؟؟؟؟
[20:16:56] Operation : Memory Tool Init [ v2.16 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : FE60EB3AAC363C9E3249CBC4688A5BD2
BROM : SecLevel : 0x000000E7
BROM
[20:16:38] BROM : 0x00000001 : DA SEND ERROR!
ERROR : BROM : DL MODE ERROR
INFO : BROM Level : SLA AUTH or AUTH required!
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
[20:08:42] No one to help me
[20:01:47] Hi, I want to unlock this phone without losing information
[19:38:53] INFINIX X670 FLASH FILE NEEDED
[19:28:19] Device is corrupted it cannot be trusted and will not boot help needed please
[18:14:34] Okay
[18:04:38] Click here @FlashFileSearchBot and type there phone name. You will get links
[17:52:46] As a first step you mst find emmc chip (hardware part)
After that check youtube regarding emmc replacement
[17:52:45] Where can I download its files?
[17:52:44] Before, the flash would turn off sometimes
[17:52:44] flash write error means emmc chip may be faulty.
replacement
[17:52:43] It was broken, I only know the phone
[17:52:43] What was the problem before reset?
[17:52:43] It was completely turned off
[17:52:43] try another file
[17:52:43] Stuck on bootlog?
[17:52:43] G plus x10 can\'t flashing
[17:52:43] ta-1017
[17:52:43] Model?
[17:52:43] can anyone help why it failed?
[17:52:43] Help me fix
[17:52:43] Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : False ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Prepare target ...
ERROR : 000000A2:A2000000FF5D7E00
GEN : UNKNOWN RE
[17:52:43] im going to flash ta-1017 via CM2 but those options are idle.
[17:52:42] hello why mine is idle those options?
[17:52:42] Oppo A5s I did smart reset with cm2 after I finished the phone reboot itself
[17:52:42] good job
[17:52:42] So I have the same problem
[17:52:42] https://www.infinity-box.com/buy/
[17:52:42] Good foto,please
[17:52:42] Hi
[17:52:42] Check website resellers
[17:52:42] Where can buy Frp octopus and CM2
[17:52:41] Product Brand : vivo
Product Device : k65v1_64_bsp
Product Model : vivo 2015
Product Name : full_k65v1_64_bsp
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020 release-keys
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2022-04-01
Build Time : 08.04.2022
Product Info : k65v1_64_bsp
Product Board : k65v1_64_bsp
Board Platform : mt6765
Product Manfct : vivo
i need this firmware anyone help me
[17:52:41] Hisense F5281 rockchip
The tablet has no volume keys
Only has power key
How to reset pattern?
[17:52:41] use FLASH mode bun not DIAG
https://forum.infinity-box.com/viewtopic.php?t=5629
[17:52:41] any prob before reset?
[17:52:41] phone not detected
[17:52:41] sw log text?
[17:52:41] test point not working
[17:52:41] we fix imei, not changing
[17:52:41] test point connection
[17:52:41] Most functions don\'t really work on KG5K like read NVRAM
[17:52:41] We all know that
[17:52:41] not working
[17:52:41] Test point work
[17:52:40] How to conect
[17:52:40] A022FXXS3BVB1
[17:52:40] disable kg lock
[17:52:40] what do you want to do?
[17:52:40] remember that to change imei phone it\'s it\'s not allowed
[17:52:40] samsung a022f test point not working phone not detected
[17:52:40] Anyone with the idea of how to change imei for refmi 9t dual sim and which tool to use
My UMT couldn’t do it
[17:52:40] Att&t network unlock
Any software or solutions please
[17:52:40] https://firmwarefile.com/oppo-a57
[17:52:40] In which tool I flash it
[17:52:40] https://firmwarefile.com/oppo-a57
[17:52:40] Whan I flash on MSM TOOL when the tool sea (the software does not match)
[17:52:39] reset it by hand disconnect battery and re-connect it then volume up and power button
[17:52:39] factory reset
[17:52:39] online?
[17:52:39] After do wht
[17:52:39] Oppo A57 is hanging on Oppo please help me please 🙏❤️
[17:52:39] 😂😂😂😂
[17:52:39] Or detach battery, connect press power button + volume up enjoy
[17:52:39] Easy, insert cable hardreset power button + volume up
[17:52:39] any help customer is on my neck
[17:52:39] I dont have scatter file
[17:52:39] i use smart rest option
[17:52:39] Or flash with scartter file
[17:52:39] Try to reset
[17:52:38] samsung a02 hung on samsung after smart reset please help
[17:52:38] What is the solution
[17:52:38] Boot Done!
Device info :
Product Brand : Safaricom
Product Device : NEON_RAY_PRO
Product Model : NEON_RAY_PRO
Product Name : NEON_RAY_PRO
Patch Level : QP1A.190711.020
Display ID : SFC_NEON RAY PRO_10.0_V01_20200417
Ver. Incmt : 10211
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-04-05
Build Time : 17.04.2020
Product Info : NEON_RAY_PRO
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Manfct : Safaricom
NVMng : SecurityInfo
IMEI[1] : 35247811125313
[17:52:38] https://youtu.be/-3upvCIPYuc
[17:52:38] I don\'t have the working one
[17:52:38] good link
What is your problem with it?
[17:52:38] https://infinity-box.com/news/
👆👆👆
[14:21:08] Read from working one, then repair imei?
[14:20:35] what do you talk about?
[14:20:20] No new things , all these models were supported even before!
You\'re only detailing loaders,
aren\'t you?
[14:19:55] Please help
[14:15:56] 🥸🥸🥸🥸
[14:13:08] Help me NVRAM file for Redmi 6 please
[14:09:19] I understand nothing my friend.
Please see ofical web site and news here https://infinity-box.com/news/
Tell me please now, what is your problem?
[14:04:23] Nokia ta 1332
[14:04:07] Nokia x10.hard reset
[13:40:06] Team , try to understand your customers, I didn\'t mean to add that devices on fast-check, never,
Add them either on any non free ones provided that are supported, otherwise, I\'m updated with cm2 latest setups!!
[13:28:11] https://forum.infinity-box.com/viewforum.php?f=3
[13:27:49] version name?
[13:24:45] Found 4 files doogee x9
1. Doogee_MT6737M_DOOGEE_X9pro_alps_mp_m0.mp1_V2.84_vz6737m.65.i.m0_P72_Android_6.0
2. Doogee_MT6580_DOOGEE_X90_8.1.0_DOOGEE_X90_Android8.1_20190318_O11019_X90
3. Doogee_NVM_NV_MT6580_eMMC_DOOGEE_X9_Mini
4. Do
[13:24:34] Nothing found for doogee x95
If you will get the file upload it to support with iosFileUploader
[13:23:39] I can\'t find FLASH mode sir. I need your help
[13:11:11] Help me tecno bd4h, after identify cant power on
[13:10:45] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM32) MODE : BOOTROM PORT : 32 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200 CODE : Merlot TYPE : MODERN [RAPHAEL] BROM : MEID : C07A5E74E571B3733C18F8817683925E BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM|BL : 0x05|0
[13:00:44] Here https://infinity-box.com/support/
[13:00:23] you must install MTK SoC drivers https://infinity-box.com/support/
[12:58:51] https://infinity-box.com/support/
[12:58:22] Make the same process several times, software will try different config every time
[12:56:19] Sir realme c21y imei repair hoba cm2
[12:54:38] New tools......fast check.
What is it for?
[12:53:57] What is the username?
[12:52:21] Good!
[12:52:13] Ok
[12:52:09] How to setup server access https://infinity-box.com/?r=100166
[12:42:26] ✅
[12:34:55] problem solved by manual select
[12:34:39] Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Realme : RMX3261
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
[12:33:00] now show this after FDL passed
[12:31:50] Hi sir
[12:29:06] Help me if I try to network unlock giving error
[12:27:59] try this
[12:25:03] Anyone have correct FDL pls share
[12:24:27] itel s16 Pro FDL not started problem face with cm2
[12:19:15] Thanks
[12:17:10] Ya ake ciki
[12:15:45] yah ne!
[12:15:18] How to fix CM2SP2 connection issue https://infinity-box.com/?r=100192
[12:15:18] Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Realme : C21Y_RMX3261
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device
[12:13:50] see examples with pictures here https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/
[12:12:59] use FLASH mode but not DIAG
[12:12:54] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x000
[12:12:35] where is sw log text?
[12:11:18] I am waiting for your good results!
[12:10:23] .
[12:09:42] Please any video that can help me to sign and download firmware from infinity site
[12:08:36] I log in but I can\'t download
[12:07:46] Realme c21y new security frp not done cm2 any update how to do?
[12:07:43] Boot Done!
Device info :
Product Brand : Safaricom
Product Device : NEON_RAY_PRO
Product Model : NEON_RAY_PRO
Product Name : NEON_RAY_PRO
Patch Level : QP1A.190711.020
Display ID : SFC_NEON RAY PRO_10.0_V01_20200417
Ver. Incmt : 10211
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-04-05
Build Time : 17.04.2020
Product Info : NEON_RAY_PRO
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Manfct : Safaricom
NVMng : SecurityInfo
IMEI[1] : 35247811125313
[12:07:26] Please
[12:06:19] Log identify
[12:05:40] How can I network unlock neon ray pro with cm2
[12:03:29] Or need FF in settings
[12:02:38] This value was changef
[12:01:08] Connect again
[12:01:05] My friend wihile you see Da get started remove from hold volume
[11:59:36] I want sign
[11:59:28] I have them
[11:59:28] Am repeating operation over and over again but still the same. Please help
[11:59:09] Sign in. )) use dongle manager 1.91
[11:58:20] I tried do download it but it didn\'t download until I sign in
[11:58:19] Tcl 305? Re -flash it, or wipe from recovery.
[11:57:21] Found 1 file tcl 305
1. Alcatel_TCL_MT6739_TCL_5058Y_7.1.1_5058Y_ALES_V2.7_190305_N6F26Q_A3A_PLUS
[11:56:47] Nothing found for tcl 6102d
If you will get the file upload it to support with iosFileUploader
[11:56:30] Nothing found for tcl 6102d
If you will get the file upload it to support with iosFileUploader
[11:54:54] ????
[11:47:59] Found 41 files a16, search limit is 20 files per server
1. Oppo_Realme_Oppo_F1S_A1601EX_11_A.40_190709
2. Oppo_Realme_MT6750_OPPO_A1601_5.1_A1601EX_11_A.35_180114_LMY47I_oppo6750_15331
3. Oppo_Realme_MT6750_OPPO_A1601_5.1_A1601EX_11_A.41_191226_LMY47I_oppo6750_15331
4.
[11:46:48] Found 2 files oppo a5s
1. Oppo_Realme_OPPO_A5s_CPH1909_8.1.0_CPH1909EX_11_A.45_O11019_ColorOS_v5.2.1
2. Oppo_Realme_MT6765_OPPO_CPH1909_8.1.0_CPH1909EX_11_A.42_O11019_CPH1909_A5s
[11:46:07] Found 2 files oppo a5s
1. Oppo_Realme_OPPO_A5s_CPH1909_8.1.0_CPH1909EX_11_A.45_O11019_ColorOS_v5.2.1
2. Oppo_Realme_MT6765_OPPO_CPH1909_8.1.0_CPH1909EX_11_A.42_O11019_CPH1909_A5s
[11:45:52] Nothing found for oppoa5s
If you will get the file upload it to support with iosFileUploader
[11:45:24] Where can I get the full fi whare
[11:43:22] ?
[11:43:13] Or wipe from recovery manually
[11:42:56] Eny help?
[11:42:38] Eny belo on my case?😡😡😡
[11:42:35] I did but still
[11:42:09] ok
[11:42:06] Try to re-flash device. Have You a backup?
[11:41:08] I also have a laptop and a desktop computer, with windows 10x64 on board. There are no such problems. And many users didn\'t complain either. Accordingly, the problem is most likely local
[11:40:23] Operation : Reset Settings/Format FS [ v2.34 ]
Mode : SMART RESET EXTRA
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : A5BEE65D275AC7132F345B72965D35C
[11:38:32] Copy and paste log here bro
[11:37:30] this error is very annoying \"wdf violation. i jst think its because of Locked Bootloader that we cant unlock them jst for now. even other boxes have same issue when come to hardlocked Bootloader 2022. you are not alone my friend.
[11:37:19] Our staff psychic is on vacation. Who could guess your actions from a crooked photo. That\'s why we need logs
[11:35:43] Where is the software log?
[11:34:05] I did all but still
[11:33:43] Try another reset method. And you need a log of the software
[11:33:30] Please any solution
[11:33:18] It reboot after I smart rest with cm2
[11:31:01] And drivers from supрort. They are tested
[11:30:10] Oppo A5s
[11:29:47] I need help
[11:29:13] You need to use a 100% original image, and not the assembly of some unknown author
[11:24:05] I did new windows. Butt still same
[11:22:35] Re install wondows, and dowmload drivers from support
[11:20:52] Even i chnge pc butt still same . When i connect phone laptop goes on this
[11:20:08] Hy guys Can any one help me . When i connect any mtk phone to cm2mtk aftr boot laptop goes hare
[11:06:41] How can I download firmware from cm2 find flashfile. Am signed in but I can\'t download
[10:54:09] 😏
[10:47:04] Platform OS Android 11 (Go edition), TCL UI
Chipset Mediatek MT6761 Helio A22 (12 nm)
[10:46:34] https://www.gsmarena.com/tcl_305-11341.php
[10:45:05] I just wanted to do something simple) so as not to write different commands on the command line. Pressing a button is much easier.
[10:43:02] Ok cool👍
[10:42:39] Cm2 not a free. Fast check is free for all.
[10:42:26] Ok bro cool
[10:39:33] Now we\'re talking about a free add-on that doesn\'t even need a dongle.
[10:37:10] Sorry 😔, is cm2 dongle free, neither it license updating too, is it free???
[10:34:31] You want a lot for free software 😂
[10:31:24] Y need firmware for this device
[10:30:56] https://youtu.be/6AXPeaxSUc0
[10:30:18] https://youtu.be/wozE_RLSQZc
[10:25:04] Remember to add also kg reset option!
It\'s disturbing when flashing spd or Qualcomm Samsung devices!!
[10:21:51] or now by TCL 305
[10:21:21] TCL
[10:21:18] Model: 6102d
[10:20:51] Patch Level : RP1A.200720.011
Display ID : RP1A.200720.011 release-keys
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-12-05
Build Time : 20.12.2021
Product Info : cruze_lite
Product Board : MT6761
Board Platform : mt6761
Product Manfct : TCL
[10:20:19] fone was ok working...after make frp smart reset now only tcl log...then off
[10:18:48] need firmware for this fone..please?
[10:18:21] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MTK USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : E2745D7AA1EAD83EC2E540F1608678B8
BROM : SecLevel : 0x000000E7
BROM : SecMode : S
[09:37:51] Need CM2SP2 boot pack
Samsung
[09:24:34] Can\'t boot
[09:23:23] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 6DF876D6F2F2FF278DD183FC14BE9F3D
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM :
[09:20:15] Am also surprised at his comments 👆
[09:14:53] if frp done TECNO kg5j
why tecno kg5k not ?
[09:07:31] Meaning that something is wrong
[09:06:48] Though I haven\'t tested one before but , inform team to work on it
[08:55:58] I tried to read the firmware for infinix X6511b not working
[08:39:12] I need this solution pls
[08:09:21] When I connect phone giving error help me
[08:08:54] Sir what is problem
[07:47:09] I ask U for test.. just only qcom sams only!.
[07:43:40] Has it been tested?
[07:11:59] Please Any solution 🙏?
[07:11:58] Wipdata
[07:11:42] It reboot it self to recovery
[07:11:07] Oppo a12 after Smart rest
[07:09:02] Yep)
[07:05:30] Battary low. Emmc foresee. . This trash emmc
[07:00:17] For 6582 in some case use 1.57 version
[06:50:27] Operation : Flash [ v1.58 ]
======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Sel
[06:14:29] This.
[06:10:26] which tool is this???
[06:07:46] Please I need Redmi note 8 pro firmware
[05:26:14] When you try to read it will tell you to identify if try to read after identifying it will still tell you to identify again but working on other devices
[05:24:19] Does anyone have these models? You can test reset frp via testpoint
[05:23:48] KG5K this model need to be tested by team frp not working read NVRAM not working
[05:19:29] My fastckeck 0.39 simple adb fastboot free tool. Write firmware via fastboot I try to re-write on this week.
[04:26:48] Estoy muy feliz de estar en esta empresa rápido en el pago Únase al equipo ganador ahora
Haz clic en el enlace 🔗
👇👇
https://t.ly/xkeg
https://t.ly/xkeg
No te pierdas esta oportunidad
InfinityBoxTalks 2022-06-19
[22:16:05] try with CM2MT2 and post your reports
[22:04:44] mediatek processor-based repair and fastboot mode flashing and so on
[22:03:16] i think infinyt Xioami Tool Should Make a Program ☹️
[21:58:43] 💐❤️
[21:58:33] you are always welcome
[21:58:25] yes, I know
[21:58:19] thanks again
[21:58:12] thanks for all your hard work and any time you tell us wait for that we waiting but we wanted that update😊
[21:56:39] If you want o send us phone samples for tests you can talk to help@infinity-box.com regarding delivery
[21:55:58] As soon as software updates will be ready you will see it
[21:55:56] you can get something els
[21:55:26] yes I can absolutely... but I choose cm2 team for long time... and you just tell me
[21:54:33] News are always here https://infinity-box.com/news/
You can check it from time to time
[21:53:33] if you need something that we do not have you can get something else.
[21:41:56] You can always check news here https://infinity-box.com/news/
[20:51:27] You are welcome
[20:30:06] Thank you so much for your assistance
[20:11:39] try another reset mode
[19:57:22] AFTER SMART RESET THIS PROABLEM SIM OFF HOW SOLVE
[19:25:09] Click here @FlashFileSearchBot and type there phone name. You will get links
[19:25:01] Click here @FlashFileSearchBot and type there phone name. You will get links
[19:24:51] try and see result
[18:13:53] Backup Chimare to cm2 flash Writing ?
[18:05:42] File /A02s
[18:04:16] File/a022f
[18:03:59] File /a022f
[18:03:37] Help link
[18:01:18] YES
[17:43:12] 👍
[17:42:42] Bd2p
[17:36:12] A022f u3 scatter anyone
[17:27:50] This phone not suported yet. Use official unlock. You can use infinity server for unlock. https://infinity-box.com/price/ price here. https://user.infinity-box.com for by unlock
[17:10:16] Did u fix!?
[16:58:49] https://forum.infinity-box.com/viewtopic.php?t=1409
[16:55:46] https://forum.infinity-box.com/viewtopic.php?t=1409
[16:49:01] Yes . Thank support
[16:44:41] Please wait a few minutes!
[16:43:07] 🥺 please hlep me
[16:38:00] === DongleManager [Infinity] v1.91 [6/19/2022 11:37:04 PM] ===
Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 00007BDC13114082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): 769E7BDC
Firmware version: 0153.02
=== Started: 6/19/2022 11:37:05 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authen
[16:34:39] what is code main
[16:32:38] Make this https://infinity-box.com/?r=100155
[16:32:38] Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Box/Dongle misconfiguration
Diagnostic code: 5A
19-06-2022 23:32:16
Username: 00769E7BDC
==> Scan D:\\Android\\Box\\InfinityBox\\DongleManager\\ for report.log
==> Scan c:\\Program Files\\ for report.log
==> Scan c:\\Program Files (x86)\\ for report.log
Found files: 0
==> Scan D:\\Android\\Box\\InfinityBox\\DongleManager\\ for *.ibin.log
==> Scan c:\\Program Files\\ for *.ibin.log
==> Scan c:\\Program Files (x86)\\ for *.ibin.log
Found files: 0
==> Scan D:\\Andr
[16:31:03] Dongle manager 1.91 or newer. Report and fix button
[16:27:43] why card erro
[16:27:35] === DongleManager [Infinity] v1.88 [6/19/2022 11:24:08 PM] ===
Searching...
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 00007BDC13114082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): 769E7BDC
Firmware version: 0153.02
=== Started: 6/19/2022 11:24:10 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication stag
[16:26:48] admin please hlep me
[16:09:30] yes, soon
[16:08:14] any new.s for new updte mtkmt2 2.35 ?
[15:54:45] Nothing found for CPH2269
If you will get the file upload it to support with iosFileUploader
[15:54:16] Nothing found for CPH2269
If you will get the file upload it to support with iosFileUploader
[15:52:20] Nothing found for CPH2269
If you will get the file upload it to support with iosFileUploader
[15:52:20] Are you referring to nokia 2.3???
[15:52:19] Nothing found for CPH2269
If you will get the file upload it to support with iosFileUploader
[15:52:19] Nothing found for CPH2269
If you will get the file upload it to support with iosFileUploader
[15:52:19] ☹️☹️
[15:52:18] Nothing found for CPH2269
If you will get the file upload it to support with iosFileUploader
[15:52:18] Oppo A16 CPH2269 Backup Firmware ?
[15:52:18] Use diag mode
[15:20:44] [FL] : Pre-Flash backup passed!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000008108000
Erase : 0x0000000010A08000 : 0x0000000002D00000
Erase : 0x0000000015708000 : 0x000000000769A000
Erase : 0x0000000021000000 : 0x0000000003A00000
Erase : 0x0000000029500000 : 0x0000000613300000
[FL] : RePartition
[FL] : RePartition Ok!
[FL] : Flashing now ...
Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup c
[15:20:44] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1633 (COM10)
MODE : BOOTROM
PORT : 10
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Krug
TYPE : MODERN [RAPHAEL]
BROM : MEID : E31A472A3F7EDA978D81F2E4C7F4D113
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : B
[15:20:40] REALME 8 RMX3085 DOUNGRED DONE
[15:11:49] Hi itel A37 NOT BOOT . i suggest to repair boot for this model or add more tricks for format
[15:11:44] Nokia ta-1192 flash file plz 🙏
[15:10:34] Anybody have flash file, loader?
Unlock solution
[15:03:40] That\'s problem of the phone please help me with the link please i have not done it before 😢😢😢😢😢
[15:02:00] Please can someone please help me with the NV data file please this phone is not mtk the phone is Qualcomm phone the phone is redmi 9t
[14:39:10] It\'s not the whole file bro... Need only nvram
[14:32:21] lava z1s airtel solution ?
[14:31:51] Nothing found for lava z1s
If you will get the file upload it to support with iosFileUploader
[14:31:24] Found 1 file tecno bd2p
1. Tecno_BD2p_SP613DEF_RGo_OP_210825V8
[14:29:08] Verry nice cm2
[14:05:02] Hello, somebody help me with this NVRAM please
[14:04:11] Hello, somebody help me with this NVRAM please
[13:56:25] Hi,
try it
In case of any problem c/p sw log text
[13:56:08] please check examples here https://www.youtube.com/results?search_query=cm2+spark+6+air
In case of any problem c/p sw log text
[13:50:42] Haw to network unlock spark 6 air with cm2 pls help
[13:44:37] Mtk
[13:28:49] Hi
D728 Dual sim
imei repair by Cm2?
[13:28:07] Infinity #CM2SP2 boot pack v1.09 released with updated loaders
[+] Condor
[+] HiSense
[+] Kiowa
[+] Lava
[+] Micromax
[+] Stylo
https://infinity-box.com/?r=100186
[13:27:53] Found 4 files doogee x9
1. Doogee_MT6737M_DOOGEE_X9pro_alps_mp_m0.mp1_V2.84_vz6737m.65.i.m0_P72_Android_6.0
2. Doogee_MT6580_DOOGEE_X90_8.1.0_DOOGEE_X90_Android8.1_20190318_O11019_X90
3. Doogee_NVM_NV_MT6580_eMMC_DOOGEE_X9_Mini
4. Do
[13:27:04] Any one can help thanks 😊 🙏
[13:26:45] Has failed please 🙏
[13:26:31] I have used cm2 best 2
[13:25:34] I have uses
[13:23:28] Members any one can assist me with tool can rest password nokia TA1206 m.kopa product
[12:10:18] Screen lock or Network ......?
[12:08:58] Hlp onlock nokia TA-1385
[11:49:32] Yes i unlock phone from another guy
[11:36:35] For Nokia 6.1 plus
[11:36:29] Can I get the latest flash file
[11:36:15] Happy Sunday guys
[11:08:41] Is imei on device while you dial *#06# ,the same with one one at device back?
[11:05:12] you can restore cert only
[11:04:36] Huawei?
[11:03:34] Does any1 have solution for this or unlock by imei service any1
[11:03:07] BD4j is it not spd processor base?
[11:02:56] yes i have activation
[11:02:34] Error encounter???
[11:01:36] Yes activation server on!!!
[10:37:21] Patch Level : LMY47I
Display ID : LMY47I test-keys
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2016-06-01
Build Time : 12.04.2019
Product Model : A10 Pro 2018
Product Brand : alps
Product Name : A10_Pro_2018
Product Device : A10_Pro_2018
Product Manfct : alps
Board Platform : mt6580
Product Info : A10_Pro_2018
USERDATA : FILESYSTEM : EXT
[10:26:54] clone firmware
[10:26:38] help i need firmware samsung galaxy a10 pro vlone
[09:41:58] coolpad 8298-a01
Password reset I tried many internal DA
This is what I get
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
BROM init passed!
CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
[09:40:35] this log when l use loader in flashmode any solution here. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : iTel : L6502
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART
[09:37:55] itel L6502 Diag mode sp unlock error
[09:37:27] Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L6502-F3208G-10.0-ZA-VDC-L-V006-20211216
Platform Version: MOCORTM_18A_ITELQ_W21.46.2_Debug
Project Version: sharkle_Smart_Phone
BASE Version:
[09:33:22] https://youtu.be/AkrBLLwavLk
[09:33:02] Yes solution available
[09:32:29] Got credit
[09:32:04] Plz help this is the problem
[09:31:55] Photo from Imtyaz Shaikh
[09:31:10] Install latest bootpack and use bro
[09:29:40] Read NV data from a working device bro
[09:28:47] Present issue?
[09:27:59] Select correct chipset version bro
[09:27:36] Cm2sp2 bro
[09:26:49] Did you have the build details of previous file on device,?
[09:24:16] Thanks Brother
[09:10:24] us waiting for updates and you using the old versions 🤔🤔
[09:07:59] ?
[09:04:44] Any moderator online please
[08:49:03] I am getting error anyone
[08:48:38] Itel l6502 network unlock possible
[07:59:46] Pls I need tecno kg5k nvram file
[07:50:15] It\'s not connected why what\'s is problem
[07:20:38] Model?
[07:07:04] Okay thenx
[07:05:31] Let me upload it in Dropbox..
[07:05:29] Tecno pop 2f
[07:02:48] Link to download please
[07:01:59] I have backed one..
[07:01:21] I need this file Tecno B1c
[06:09:44] Cm2 can with cm2mtk... U can also try mmodule
[06:00:00] can beset or best 2 or cm2 this ?
[05:57:48] Requires a box or program to get read or flash of mt6261 CPUs
[05:27:50] https://dl1.infinity-box.com/00/pub/?dir=soc-drivers/
[05:26:28] I need all cm2 best driver link 🔗 please .
[05:09:14] 😁
[05:09:11] Ya
[05:08:52] Found 1 file itel p33
1. iTel_NVM_ITel_P33_nv_MOCORTM_17C_W18.31.2_P24_Debug_FM_BASE_17C_W18.31.2_P24_sc7731e_modem_pike2_pub
[05:08:07] Find/file
[04:55:00] Lol)))
[04:53:37] W5504 itel P33 nv
[04:53:13] Help with itel P33 nvram file😢😢😢
[04:52:43] Hello team
[04:45:08] Yes
[02:59:26] 😅😅😅😅😅😅
[02:52:34] Anyone please help with download link
InfinityBoxTalks 2022-06-18
[22:00:46] have some relax boss
[21:49:47] Im lazy. Let me pin it tomorrow.
[21:15:31] My friend install telegram on ur PC and do job
[21:12:49] not pinned
[21:12:36] cm2sp2 boot pack v1.09 available at support but now pinned over here
[20:50:40] 1 or 2 years will be added
[20:30:05] What will happened when I activate in my current activated 🤔?
[20:28:09] Ok 👍 👌
[20:27:35] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r
[20:27:35] Admin can I activate cm2 dongle up to 4 year?
[20:25:19] What\'s wrong with it
[19:47:44] Thank you my friend I will try
[19:45:40] Use this https://dl1.infinity-box.com/00/pub/?dir=soc-drivers/&uid=19162&file=InfinityBox_update_CM2SPD_Drivers_v1.02.7z
[19:43:25] I have itel s661w with frp sped phone when connect phone to computer by holding volume key i have unknown USB but in diag mode phone connect fine to infinity cm2 i have used many driver but same problem
[19:35:39] The possibility of payment you discuss with the seller
[19:30:54] Is there any other solution
[19:30:47] What if I don\'t have the credit card
[19:29:42] https://infinity-box.com/price/ price here
[19:28:38] choose the seller from this list that you like best) and ask him) https://infinity-box.com/buy/
[19:27:16] So how much will cost me 5 credits
[19:24:11] it cost 5 infinity -credits
[19:22:28] U need login & pass to https://user.infinity-box.com/, and U must have infinity credits. By it U can https://infinity-box.com/buy/
[19:20:18] Nokia C10 sim block
[19:18:13] I need help please
[19:14:49] I think that\'s where the problem is
[19:13:54] P20pro imei Ned halpe
[19:00:28] NOT detection BROM mode
[18:46:07] Qiku 8681 A01
Password reset I tried many internal DA
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
BROM init passed!
CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK
[18:42:46] Lol
[18:27:49] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
BROM init passed!
CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM
[18:20:15] Qiku Q lune
Password reset help
[16:44:37] Good
[15:53:36] Qiku Luna youth DA please team?
[15:38:00] a03s imei restored with king cm2
[15:36:13] Ta-1203
[15:09:47] Or possible any other module open
Close all before open any
[15:03:19] No activations
[14:54:19] Thanks for cooperating to tell me what the problem is
[14:50:57] What is this problem?
[14:04:00] How to fix CM2SP2 connection issue https://infinity-box.com/?r=100192
[14:04:00] Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : HiSense : HLTE223E_H30-Lite-9
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
>>> ERROR : FLASH FDL NOT started!
>>> Error : Fail to boot FDL!
[13:42:26] Still bd4j which base
[13:41:57] untick auto EMI in Setting
[13:41:57] CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : D20502AF0CAB3CE56509D7DB5B74C0BD
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 6918A90C43A1833457FCF496208D483FE5118BA6CC0DEEFE98B736CBB6F29A30
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suita
[13:15:49] Hi,
c/p sw log text
[13:15:18] Contact to any seller https://infinity-box.com/buy/
[13:05:11] I have 2 pieces here trying to flash but no way
[13:05:11] Hello house... Is infinix X670 (NOTE 12) support in cm2...??
[13:03:41] pls i need cm2 activation
[12:34:51] It works well.
what is your problem?
[12:34:05] What file do you need?
[12:33:47] wrong firmware selection
[12:31:48] *Nokia C21
[12:18:37] Am trying to unlock a Nokia C20 but it\'s failing, it\'s not even subtracting credits
[12:17:49] Is network unlock for Nokia HMD down?
[12:06:50] Not able to found this file pls provide link , about link ask for sign in but after sign in it still nit able to found
[12:04:53] EMI : DEV : MT6752
EMI : SRC : preloader_ch6n_h6912.bin
EMI : CNT : 0008
EMI : [00] : eMMC : LP_DDR4X : ID : 150100445036444142 : VEN : SAMSUNG | DEV : DP6DAB : RAM : [ 4.00 GB ]
EMI : [01] : eMMC : LP_DDR4X : ID : 150100335636434142 : VEN : SAMSUNG | DEV : 3V6CAB : RAM : [ 6.00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 13014E47314A395339 : VEN : MICRON | DEV : G1J9S9 : RAM : [ 4.00 GB ]
EMI : [03] : eMMC : LP_DDR4X : ID : 90014A684445615033 : VEN : HYNIX | DEV : hDEaP3 : RAM : [ 6.0
[12:04:52] No it’s oppo A15s for network unlocks
[12:04:47] Files :17
[FL] : Set : preloader_ch6n_h6912.bin
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : md1img.img
[FL] : Set : spmfw.img
[FL] : Set : scp.img
[FL] : Set : sspm.img
[FL] : Set : gz.img
[FL] : Set : lk.img
[FL] : Set : logo.bin
[FL] : Set : boot.img
[FL] : Set : dtbo.img
[FL] : Set : tee.img
[FL] : Set : super.img
[FL] : Set : tranfs.img
[FL] : Set : userdata.img
[FL] : Total size : 0x1A737ACD8 [ 6.61 GB ]
1. Make sure device is powered off. Power
[12:04:46] Files :17
[FL] : Set : preloader_ch6n_h6912.bin
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : md1img.img
[FL] : Set : spmfw.img
[FL] : Set : scp.img
[FL] : Set : sspm.img
[FL] : Set : gz.img
[FL] : Set : lk.img
[FL] : Set : logo.bin
[FL] : Set : boot.img
[FL] : Set : dtbo.img
[FL] : Set : tee.img
[FL] : Set : super.img
[FL] : Set : tranfs.img
[FL] : Set : userdata.img
[FL] : Total size : 0x1A737ACD8 [ 6.61 GB ]
1. Make sure device is powered off. Power
[12:04:46] Card found : E76928FE , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Load IDBase v312457 Ok!
Operation : Reset PrivacyLock [ v2.34 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
Device not found!
>>> Check cable, battery, connection and drivers!
Reconnect Power/Cable!
Operation : Repair Security [ v2.34 ]
Mode : META
1. Ma
[11:50:19] good choice friend!
I\'ll be waiting fro your info at support forum. Please let me know your forum thread link
[11:48:38] Please see here full info about support sites https://infinity-box.com/contact/
[11:48:06] ok friend
In this case you can use support froum for best results,
you can post your problem and log text there
[11:46:16] Na my phone I de used
[11:46:03] For telegram
[11:45:56] Laptop
[11:45:51] Am not using
[11:45:05] copy it and paste here
[11:42:46] but your case is an exception of course
you can send all what you want
[11:42:20] because I do not answer to ugly selfies but I accept only TEXT messages
[11:41:42] Why
[11:41:41] How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[11:41:31] Tecno
[11:41:27] Ch6
[11:41:19] very bad, very bad
[11:41:08] No
[11:40:48] Do you have a secret knowledge how to get sw log text?
[11:40:18] give me full log text but not selfie
[11:39:10] Please
[11:39:08] Solutions
[11:24:34] Help for this Samsung A03
[11:20:24] emmc chip fault
[11:19:50] الهاتف منطفئ هل من حل
[11:17:31] Ok
[11:16:41] You are my Hero!
Please check youtube how to copy files from phone to PC
[11:15:27] Do you finally have any plans to learn how to find files at support server?
[11:15:09] I opened the mail with phone
[11:14:51] Found 1 file A661w
1. DA_SPD_USC_iTel_iTel_A58_A661W.fdl
[11:14:34] is it dead phone?
[11:14:07] A661w fg boot file please
[11:13:50] perfect, my friend!
now power-on your PC, open your gmail and save file from your gmail you your HDD
[11:13:18] Yes
[11:12:54] Have you got an e-mail message with the file?
[11:12:03] Found 1 file 6811B
1. Infinix_X6811B_H857B_R_GL_211110V764
[11:10:41] Infinix
[11:10:30] Admin
[11:10:26] Help link to download x6811B
[11:06:51] https://www.martview-forum.com/threads/nokia-105-4g-ta-1385-network-unlock-done.65148/
[11:06:42] https://forum.gsmhosting.com/vbb/f296/nokia-105-4g-ta-1385-network-unlock-done-3022408/
[11:06:31] Help
[11:01:41] I see the file but is not open to copy
[11:00:48] I\'ve do the installation
When I lunch the best exe, it\'s indicating license file as been sent to mail, how can I copy and paste the license file and paste to Best folder
[10:56:52] Oppo A15s
[10:50:57] A661w fg file
[10:49:41] Help me with A58 fg boot file
[10:35:43] tnx
[10:35:02] https://youtu.be/pr2wtLU3Yl8 check this out bro
[10:32:32] frp
[10:32:09] find original pac file and make boot file with cm2.
[10:30:28] What phone u have nd problem ?
[10:28:35] tried all stl same
[10:26:23] CE014B4D355638303031444D2D423632
UFS:
VEN : 0x01CE
VID : KM5V8001DM-B62
IFW : 0003
LU0 : 0x00400000 [ 4,00 MB ]
LU1 : 0x00400000 [ 4,00 MB ]
LU2 : 0x1DCB000000 [ 119,17 GB ]
FSN : FD10000
REG : 0x101010000
CHIP : MT6853 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000
RNID : D2CDFF8AAF404A96307621B2710B2513
DA : USB : HIGH-SPEED
Boot done!
[FL] : HW ver
[10:26:22] Card found : 26DC7B5E , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Load IDBase v312457 Ok!
Preloader [HW DEV] Info :
EMI : DEV : MT6752
EMI : SRC : preloader_k6853v1_64_titan.bin
EMI : CNT : 000B
EMI : [00] : eUFS : LP_DDR4X : DEV : MT064GASAO2U212H : RAM : [ 4,00 GB ]
EMI : [01] : eUFS : LP_DDR4X : DEV : KM2V8001CM-B707 : RAM : [ 6,00 GB ]
EMI : [02] : eUFS : LP_DDR4X : DEV : KM5V8001DM-B622 : RAM : [ 4,00 GB ]
E
[10:14:44] do this and try again. post result
[10:13:38] Cm2 not supported.
Use unlock tool
Cheetah tool
[10:12:29] Frp hor id
[10:11:57] Nova 9se I need help please
[10:10:08] Who can help me downgrade Nokia G20 android version 12 to 11
[10:03:52] How to fix CM2SP2 connection issue https://infinity-box.com/?r=100192
[10:03:52] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or setti
[10:02:01] and repeat
[10:01:59] enter correct IOS login details in exe
[10:01:18] Need help
[09:55:24] Radmi 9t
[09:55:14] any solution plz
[09:54:39] fdl not started😔 error
[09:27:24] To remove frp we use infinity-box cm2.
[09:18:11] How to remove frp
[09:16:42] How much remove frp
[09:13:34] what is the firmware name?
[09:12:44] https://forum.gsmhosting.com/vbb/f296/mobicel_r7-successful-frp-done-danko-3022348/#post14571112
[08:58:16] Tecno f1/
[08:58:03] Only 1 IMEI will show not both
[08:57:38] Tecno f1
[08:57:23] Tecn f1
[08:47:59] The phone is qcm file
[08:47:58] Please who have this file please help me
[08:47:58] After finishing with the file i download it shows me this
[08:47:57] Please can someone please help me with this file please
[08:47:57] Am in trouble
[08:47:56] Good morning all please help me
[08:10:36] helpe me
[08:04:39] Easy buy initial problem
[08:04:21] Full formatting and flashing
[08:03:48] Please I need help
[08:00:01] Mkuu njoo whatsapp tuitoe
[07:56:08] No
[07:55:19] nokia 1.4 ta-1322 password+ frp support in cm2 ?
if yes how
if no what is alternative
[07:50:21] LATEST .FG FILE ,OLD WILL NOT WORK
[07:48:36] NOT ABLE TO FIND THIS FILE ON SUPPORT
[07:25:31] What is the phone model name?
[07:23:50] Post sw log text to support forum https://infinity-box.com/?r=8
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[07:23:19] Fix your PC https://infinity-box.com/?r=100103
[07:22:31] kg5k loaders are in boot pack
[07:21:24] Ok
[07:21:13] work, work
[07:21:08] Post sw log text to support forum https://infinity-box.com/?r=8
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[07:21:05] I did that but it didn’t work
[07:21:00] it looks like you have serious problem and supporters must help you personally
Post sw log text to support forum https://infinity-box.com/?r=8
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[07:20:38] What do I do
[07:20:28] use built-in loaders!
[07:20:21] It does not identify
[07:20:00] I can’t use it to read firmware
[07:19:50] Nothing found for Infinix x665
If you will get the file upload it to support with iosFileUploader
[07:19:34] run exe and use default loaders
[07:19:04] Found 1 file kG5K
1. Tecno_KG5k_F062_11.0_GL_V034_20220214
[07:18:41] where?
[07:18:32] why?
[07:18:14] OK we are waiting.
[07:07:20] Sir why ssl library not lode
[07:05:47] Please help me me with kG5K TECNO firmware read
[07:05:18] C1 2nd Edition later
[07:04:47] in case of failure just repeat and software will resume transfer
[07:04:07] Security upgrade
[06:59:42] Guy am trying to also read firmware
[06:57:50] Yes possible
[06:57:40] Yes
[06:56:58] Nokia TA-1380 network unlock.
[06:09:55] ITS OK AFTER USE VPN
[06:04:50] FAIL UPLOAD
[06:03:41] Admin please help me with TECNO spark 8c fdl file. I want to read firmware
[06:02:38] Please help
[05:52:56] Pls I need Infimix x665 firmware’
[05:50:16] Please help with fdl file for TECNO kG5K. I want to read firmware
[05:49:09] Admin I have done it with cm2 spd and it worked
[04:59:21] SIM2 will not work
[04:58:51] Only SIM 1 IMEI will show
[02:24:26] Make this https://infinity-box.com/?r=100155
[02:24:26] My cm2 mt2 not opening since yesterday evening but other modules are working well
[00:35:07] Make flash and tick nvram update
[00:27:22] I try to read NVRAM on KG5K software to me to identify first did that more than 5 times same message still asking me to identify
[00:25:44] NVRAM BACKUP FOR SPD2 NO LONGER WORKS LIKE BEFORE
InfinityBoxTalks 2022-06-17
[23:59:25] https://t.ly/4WBp
https://t.ly/4WBp
[22:49:18] cant conect mta mose i have latest drivers instaaled Operation : SP Unlock [ v2.34 ]
Mode : META
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM39)
MODE : BOOTROM
PORT : 39
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MOD
[22:45:07] cant connect to meta i have downloaded drivers still not working Card found : 6594C96C , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Socket Error # 11001
Host not found.
Load IDBase v312457 Ok!
Operation : SP Unlock [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB P
[22:25:09] این دهن ماترو سرویس کرد برا چینج
[22:24:52] If you have good flash files and if you want to share it with other users please use https://infinity-box.com/?r=100020
It\'s best way for all users and it\'s easy for you too.
[22:22:32] 100% oke
[21:43:09] https://infinity-box.com/
[21:41:40] how to download please help me
[21:39:43] but this page is not for download files my friend
[21:38:48] tnx
[21:38:30] ckick to link and see how to register
[21:37:26] what is this can not see any code
[21:35:06] what is the problem?
[21:35:01] ok good
[21:34:35] i want to conect and use server for download file
[21:34:05] ه صشدف فخ زخدثزف بخق یخصدمخشی بمشسا بهمث
[21:33:23] what is the problrm?
[21:27:52] can any one help me ?
[21:27:16] i can not register my cm2 for download file
[21:25:56] software says: Repeat operation in META mode!
[21:18:53] How far about cm2 mtk
[21:13:44] I try all not done Oppo F11 PRO
[20:59:57] infinity team please can this oppo A15s BE UNLOCKED Card found : 6594C96C , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Socket Error # 11001
Host not found.
Load IDBase v312457 Ok!
Operation : SP Unlock [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632
[20:57:45] In essence I really need that for the Oppo find x
[20:46:35] Funny you that have Oppo easy buy solution
[20:41:13] I need Oppo find x screen lock solution
[20:39:05] I need Oppo find x solution
[20:37:08] I need huawel jny-lx1 dload file free one
[20:35:26] You welcome
[20:35:14] Ok
[20:33:54] thank you very much now i can enjoy my spd cm2 very fast and easy
[20:32:25] Solution for all redmi dead boot
[20:31:15] Solution for easy buy Oppo
[20:11:27] Thanks!
[20:09:50] Probably you are right
[20:06:59] DongleManager has DEFAULT FACTORY password.\r
You must use the same password as for your Infinity Account.\r
\r
Reset password here https://infinity-box.com/service/
[20:06:59] PLEASE I NEED HELP WHY AM I GETTING THIS ALL TIME WITH SPRD BUT WITH UNLOCTOOL IT GOES WELL Card found : 6594C96C , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection.
[19:33:18] No what he has to do is to uninstall the update ... mine too was like that
[19:11:52] How??
[19:07:48] As I can see it was fixed after update
[19:04:40] Found 1 file ta-1203
1. N_105_N_105_TA_1010_TA_1034_TA_1037_TA_1174_TA_1203_here
[19:03:27] CM2SP2.exe
[18:42:50] didn\'t boot
[18:40:19] stuck on bootlogo?
[18:39:32] select another base/model or DA
[18:38:18] https://www.nirsoft.net/utils/blue_screen_view.html
[18:38:07] But.... not all model. After note 7 need internet for check files. I think about it, how can I do it without checking so that it works without the Internet
[18:37:50] reboot PC after drivers installation
[18:37:34] Oppo a53 factory reset done ✅ without flash
[18:37:01] What do you mean crash?
post sw log text
[18:36:14] How to recharge Infinity Account
Find a Seller near you
Send Infinity Username to Seller
Order Infinity Credits
Wait some time. Recharge time depends on Seller
https://infinity-box.com/service/
[18:35:35] What is the problem now?
[18:33:56] yes was frp but had to bypass because of not accepting sp7731e with 1GB of ram
[18:28:16] Full log please
[18:28:06] https://infinity-box.com/price/
[18:27:49] what is the problem with the phone?
[18:27:00] Foto this menu.
[18:26:37] wrong password!
How to setup server access https://infinity-box.com/?r=100166
[18:26:00] No. There is no this service any more.
The only way is code-by-imei
[18:25:33] Have enabled adb already what next
[18:25:03] Found 3 files X6511b
1. Infinix_X6511B_F6318_11.0_OP_V026_20211027
2. Infinix_X6511B_F6318_11.0_OP_V022_20210926
3. DA_SPD_USC_Infinix_Infinix_X6511B.fdl
[18:16:12] do you have SoC drivers installed?
[18:15:54] Gionee P15 pro division zero error
[18:15:13] Good day everyone
[18:14:30] Found 5 files qmobile j1
1. QMobile_SP7731GEA_HDR_LT950_PRO_8.1_J106_A3_S011_AD_LT950_PRO_V1.0_20190821_LT950_PRO
2. QMobile_SC8830_android_1_Infinity_Panthere_Pro_8.1_J106_A3_S021_AD_Infinity_Panthere_Pro_V1.0_20190924_MRA58K_Infinity_Panthere_Pro
3. QMobile_NVM_SC8830_android_1_Infinity_M1_Pro_8.1_J
[18:13:42] Do the process
[18:13:23] Tap on build number 10 times.. and enable developer options
[18:12:18] Bootloader unlock?
[18:09:51] Problem
[18:09:25] X665b
[18:08:03] Hi samsung a037f frp not working
[17:57:09] transferred to support server https://infinity-box.com/?r=100193
[17:45:58] I have never seen this phone😂
[17:24:32] Yes I can
[17:10:06] Security 2022 that\'s y boot loader can\'t be unlocked
[17:05:52] Okay thanks
[17:04:08] I re-write it
[16:59:03] no crush your syestem this security 2022
[16:58:28] Anyone with SM-A107FXXU7BTJ1 root file please?
[16:52:55] Boot loader
[16:51:38] And can it unlock Infinix x665b
[16:49:43] Fastboot mode not working?
[16:26:21] As for xiaomi, you can write firmware via sideload, no internet connectoin needed
[16:24:36] Ido it in my free time.
[16:23:52] Simple adb/fastboot tool.
[16:22:57] No need any dongle.
[16:22:39] This is free solution
[16:22:17] This is for what?
[16:21:48] If you want, you can use
[16:20:18] Next times ban :) as alternative solution
[16:18:27] Ff in settings
[16:17:45] I know but just given an alternative solution
[16:16:36] Is it nck dongle chat?
[16:14:12] Use Nck dongle spd
[16:09:55] helo guys
i want to know model number of this nokia how to identify it
IT QUALCOM CHIPSET
[15:29:31] Nokia Ta-1165 (C1) network unlock
[15:17:20] Flash file please
[14:52:35] I did not understand. Is your uploaded preloaded good or not?
[14:51:18] Mi Account info https://forum.infinity-box.com/viewtopic.php?t=3947
[14:46:37] help needed samsung a10s reset
[14:45:43] Card found : E80FAD3C , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33
Load IDBase v312457 Ok!
Update configuration ...
Load IDBase v312457 Ok!
Operation : Identify [ v2.33 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : In
[14:33:59] thanx infinity
[14:33:45] Get Username and reset Password here https://infinity-box.com/service/\r
\r
Enter Username and Password this way - https://www.youtube.com/watch?v=KogYDEkg-O8\r
\r
[14:33:45] 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 10814 release-keys
Platform Version: MOCORTM_18A_W20.04.1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.04.1
HW Versio
[14:33:44] Card found : E365151E , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : SP Unlock [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1
[14:03:59] cpu type?
[14:03:46] Ta 1285 simlock solution
[14:03:25] try with CM2SCR.exe
[14:02:09] what is the hwid?
[14:01:48] C1 2nd Edition some time later
[14:01:12] SoC drivers are here https://infinity-box.com/support/
[14:00:47] as per your nice selfie it can boot
what si the problem with frp?
[14:00:06] what was the problem before and what is now?
[13:57:59] Any seller from this list https://infinity-box.com/buy/
[13:56:22] How to recharge Infinity Account
Find a Seller near you
Send Infinity Username to Seller
Order Infinity Credits
Recharge time depends on Seller
https://infinity-box.com/service/
[13:47:36] Perfect!
Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[13:42:50] One of my tools flashed it successfully with locked boot loader (file from their support)
[13:38:29] Can I unlock
[13:38:18] enter correct login details in exed
[13:36:07] My account has 10 credits sir!!
[13:35:29] The problem is not receivng credits!!. I got them but when am try to use cm2 i got the error like that , can you help sir?
[13:32:25] If you not received credits
[13:32:15] Contact reseller
[13:31:49] Help me sir
[13:30:49] X655b cm2 does not support it yet with unlock bootloader have tried not working hot 12i
[13:29:34] Am facing problem to unlock nokia c20 ta1352 network lock and already buy credit from server but not appear in software but in my account its seen please help me
[13:21:27] I didn\'t back up
[13:21:07] Find nvram where pls
[13:20:45] I want to add on please help me
[13:20:29] Find and write gud nvram
[13:20:07] Infinix x5515 nvram damage solutions pls am new user
[13:19:31] Balance: 0, price:5
[13:18:28] Card found : E365151E , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Identify [ v2.14 ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify
[13:11:30] Any one here help me to bu credits on my account
[13:03:17] https://youtu.be/yYcJUBcTPWs
[12:57:59] No
[12:57:32] Is the bootloader unlocked?
[12:55:42] TA-1270 hang hear after flash with file from infinity support.
[12:42:54] How to solve this
Samsung sm-a032f
Android 11
CPU spd
[12:40:21] help aftar farmet with cm2
[12:30:16] Done already
[12:30:03] any recommended loader to remove frp
[12:29:46] stylo inkosi (DLQ64)
[12:29:45] Samsung sm- a032f
CPU spd android 11
[11:42:06] mediatek preloader usb vcom (android) (com10)please I need this drivers
[11:40:18] Guys I need hep to unlock network for Nokia TA 1380
[11:19:55] I\'m trying to check best dongle serial number it\'s indicated smart card can\'t be found: card with specified AID is not found
[09:58:49] Help please
[09:55:43] ITEL 6350 cm2 sp2 reset fdl please
[09:52:14] neon ray pro
[09:44:25] Model?
[09:40:59] روز بخیر برادر، درایور SOC را از پشتیبانی نصب کنید و دوباره امتحان کنید
[09:36:39] Help for Huawei Y7 2019 frp locked
[08:31:41] Sim lock any solution?
[08:14:33] Hi everyone,please Samsung A22 Kg lock any method/file for remove it
[08:13:19] even scatter not loaded
[08:13:08] Nothing found for mobicel berry plus
If you will get the file upload it to support with iosFileUploader
[08:12:52] it is working dump
[08:12:42] hallo loader not accepted
[08:12:29] EMIBase : BAD or DAMAGED file selected!
[07:37:57] Please help Redmi 7 mi account bypass
[07:08:18] Mtk
[07:08:17] Nokia lumia not supported again?
[06:57:42] Test point need
[06:55:28] vivo v21
[06:49:21] vivo y21
[06:49:14] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM21)
MODE : PRELOADER PORT
PORT : 21
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6853 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Moution
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x
[06:39:13] https://drive.google.com/file/d/13B7Ck4609xth_PkR8Waug-KqU5xYqoKv/view
[06:36:52] how
[06:36:31] without tp
[06:36:13] https://support.halabtech.com/index.php?a=downloads&b=file&id=565499
Need this file urgent. Please help
[06:36:09] Operation : Reset Settings/Format FS [ v2.26 ]
Mode : FULL FACTORY ( FORCED + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM25)
MODE : PRELOADER PORT
PORT : 25
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
CODE : Bianco
TYPE : MODERN [RAPH
[06:34:57] how
[06:34:04] No need test point.
[06:33:53] Anyone helping me
[06:30:58] with test point
[06:30:42] Card found : 2417E96E , v0149
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.26
Load IDBase v77228 Ok!
UserName and/or Password not set! Can\'t continue!
Update failed! Check settings and/or internet connection!
Operation : Reset Settings/Format FS [ v2.26 ]
Mode : FULL FACTORY ( FORCED + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM57)
MODE : BO
[06:30:14] oppo f5
[06:30:03] DA : SYNC char NOT received!
[05:36:01] I have been desable antvirus i tried to reinstall but problem still
[05:34:14] Help i get error on cm2😭
[05:33:51] access violation at 004044a9 in module cm2scr
[05:10:26] X6511b flash file needed pls
[04:25:13] ok
[04:24:40] Let admin attend to you
[04:22:29] I deleted soc and same problem
[04:18:27] After turn off the PC protector reboot the system, delete the first soc you install, and try with the one I download when the PC protector is off
[04:13:39] the same problem
[04:12:56] Turn off your PC anty virus protector
[02:28:04] Yes
[02:26:13] Nokia lumia still supported infinity unlock by credit?
InfinityBoxTalks 2022-06-16
[22:26:24] SAMSUNG FRP ONLINE ✅
SAMSUNG OLD KEY ID ONLINE ✅
SAMSUNG NEW KEY ID ONLINE ✅
SAMSUNG UNLOCK ONLINE ✅
SAMSUNG FRP ONLINE ✅
MOTOROLA ONLINE ✅
TOKEN ONLINE ✅
OPPO ✅
NOKIA ✅
REALME ✅
XIAOMI ✅
[22:14:49] Send your Infinity Username to seller https://infinity-box.com/buy/\r
\r
How to know Username https://infinity-box.com/service/
[22:14:49] GA Pro Tool Credit prices
1 credits=1Phone
5 Credits=R80
10 credits=R150
15 credits=R225
20 credits=R300
30 Credits=R400
50 Credits =R650
100 credits=R1200
Tool link
https://drive.google.com/drive/folders/1SdjD31nACSvtz_k4TGEi5tEYlw5ZJa2e?usp=sharing
How to buy credits?
Download tool and registration then send ur email
[22:08:00] https://t.me/techsoft7
[21:55:02] Connect pc to internet
[21:48:26] Input correct password
[21:28:25] Can someone help me here
[21:03:26] Mode : FRP [ RESET PROTECTION ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM14)
MODE : PRELOADER PORT
PORT : 14
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0xFF|0
[21:00:36] Operation : Reset Settings/Format FS [ v2.34 ]
Mode : FRP [ RESET PROTECTION ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM14)
MODE : PRELOADER PORT
PORT : 14
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
[20:26:08] If I use mata mode it says done when I request nothing changed?
[20:19:20] Operation : Repair Security [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
B
[20:18:02] Vivo Y1s imei repair field help
[19:42:39] oppo a5s supported ??
[19:40:11] 👍🙏
[19:38:28] Credit you can buy from me or anyother reseller it\'s payment method is PayPal Bank transfer and other online methods when you need to buy inbox
[19:36:49] Yes sir
[19:36:16] aok but i wanted to know more about credit payment
[19:26:40] means you can know your infinity cm2 card number
[19:13:25] please further explanation 🙏
[18:50:52] help me for this problem please it\'s TECNO pova ld7
[18:25:54] Get your right SN number from here and 1$ 1 cradit
[18:22:29] Cost for credits..
[17:59:48] Buy credit with your S.N NUMBER
[17:58:59] https://youtu.be/qCD6NW1TYOA
[17:56:42] How to add credit to my cm2
[17:51:03] I clean motherboard?
[17:49:37] Frp bypass A10 mtk binary u8
[17:20:21] I assume it\'s not reading emmc clean a little more and see
[17:12:24] Operation : Write Flash [ v2.34 ]
Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Disabled
Files :23
[FL] : Set : recovery.img
[FL] : Set : opporeserve2.img
[FL] : Set : md1img.img
[FL] : Set : spmfw.img
[FL] : Set : scp.img
[FL] : Set : scp.img
[FL] : Set : sspm.img
[FL] : Set : sspm.img
[FL] : Set : cam_vpu1.img
[FL] : Set : cam_vpu2.img
[FL] : Set : cam_vpu3.img
[FL] : Set : lk.img
[FL] : S
[17:05:10] Yea mine too dous this plz help
[17:04:20] Mt2
[17:03:19] My cm2 mtk crashes when i try to read plz help
[16:48:55] Phone not supported at the moment
[16:45:20] but still locket
[16:44:55] Operation : SP Unlock [ v2.34 ]
Mode : META
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : D08B12AE00DF49FDE5BEE8268CE6CFF5
BROM : SecLevel : 0x00000
[16:41:19] Card found : F3CA75A8 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
UserName and/or Password not set! Can\'t continue!
Load IDBase v312457 Ok!
Operation : SP Unlock [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BR
[16:36:04] Please I need NV unlock Alcatel 5007U urgent
[16:29:04] any solution??
[16:16:35] after install drivers soc spd
[16:12:21] سلام این چشه، میاد که frp برداره سیستم اینجوری میشه بعد ریستارت میشه
[15:54:22] https://forum.gsmhosting.com/vbb/f296/nokia-c20-ta-1352-network-unlock-done-3022001/
[15:54:02] https://forum.gsmhosting.com/vbb/f296/nokia-c20-ta-1352-format-fs-reset-settings-done-3022007/
[15:53:25] Are you there bro?
[15:34:22] Yup flash it and see what error occurred
[15:29:31] With CM2?
[15:23:15] If there is no preloader left in emmc it won\'t detect anyway
[15:22:41] Select firmware and try flashing once
[15:21:57] same problem G630-u20 i fixed by flashing stock rom. jst find good rom
[15:17:55] Uncheck auto emi in settings bro
[15:08:39] As I told u before it\'s hardware issue asses under microscope.. then repair layers if needed..
[15:07:15] I think no patch option in cm2!!!
[15:04:36] How can I patch security on galaxy A107f using cm2, the phone is showing \'not registered on network \'
[15:04:22] ??
[14:57:14] try in flash mode
[14:53:50] is it possible to be unlocked ??
[14:53:50] permanately locked possible to be unlocked??
[14:48:47] Please
[14:48:44] Solutions
[14:47:20] RM-1037 unlock
[14:38:40] Try hard reset
[14:23:57] It\'s a Qualcomm chipset device
[14:23:51] im looking for nokia 105 (ta 1203)
and nokia 150 (ta 1235) Greek language
[14:23:16] Please I need help on how to fix honor G621-tl00 null imie
[14:22:57] i cant find it anyware
[14:22:48] im looking for nokia 105 (ta 1203)
and nokia 150 (ta 1235) Greek language
[14:21:19] your phone is mtk not spd bro.
[14:17:18] CPU?
[14:16:59] use cm2 mt2 choose tecno, Raphael v2, tick manual mode
then continue....
[13:31:05] pleaseee
[13:31:04] alcatel 8091 frp solution??
[13:22:33] alcatel 8091 frp ???
[13:22:27] 8190 frp
[13:21:20] Formatting by Cm2 is not working
[13:15:20] Found 6 files Nokia C1
1. MTK_MT6253_GROUSE_S02_PCB01_GPRS_MT6253_S00.GC03_02A_V1_0_CN_FOREIGNS_CAMGC0309_FM_ALL_FLNTY5701111183KC_2011_04_18_Nokia_C10_16m_En_Fr_Es_Urdu_Farsi_Pt_Ar_Hi.B0M
2. MTK_MT6205_MT6227_CM_Nokia_N668_2sim_RATECH26_06A_PCB01_GPRS_MT6226_S01.S900BT.26B.SP.BTM_06A_WRTX_V010.C16.B_0001_En_Fr_Es_Vn_Ru_Arabic_Th.B0M
3.
[13:14:13] Nothing found for TA-1380
If you will get the file upload it to support with iosFileUploader
[13:14:09] It support Samsung a20s ?
[13:06:39] Format with cm2
[13:01:56] 8091 frp error
[13:01:51] ??
[13:01:41] 🙈
[13:01:01] How to fix this problem on itel it1508
[12:58:51] ?
[12:58:50] please solution
[12:58:45] alcatel 8091 frp error
[12:58:37] admin
[12:58:35] admin
[12:57:43] Infinitx x655b
[12:57:10] Bootloader unlock error
[12:56:47] Identify mode
[12:56:24] Have try Brom mode, local sla still boot loader unlock not working keep bringing error not supported
[12:53:38] Hello, can you send me this file, thank you
https://support.halabtech.com/index.php?a=downloads&b=file&id=626230
[12:52:40] Username: 005B621B96
==> Scan C:\\Users\\user\\AppData\\Local\\Temp\\_tc\\ for report.log
==> Scan c:\\InfinityBox\\ for report.log
==> Scan c:\\Program Files\\ for report.log
==> Scan c:\\Program Files (x86)\\ for report.log
Found files: 0
==> Scan C:\\Users\\user\\AppData\\Local\\Temp\\_tc\\ for *.ibin.log
==> Scan c:\\InfinityBox\\ for *.ibin.log
==> Scan c:\\Program Files\\ for *.ibin.log
==> Scan c:\\Program Files (x86)\\ for *.ibin.log
Found files: 0
==> Scan C:\\Users\\user\\AppData\\Local\\Temp\\_tc\\ for fault.bin
==> Scan c:\\Infi
[12:50:50] Make this https://infinity-box.com/?r=100155
[12:50:50] smart card misconfiguration Contackt to support
[12:50:09] i have problem with cm2
[12:49:56] Hi admin
[12:43:57] Which phone
[12:43:36] Oppo F11, Oppo F11 Pro MTK Port Only Dead After ISP please help
[12:42:55] Download the latest bootpack for mt2 and sp2, and install
[12:36:17] Download cm2sp2 latest v1.08 bootpack extract it and install
[11:49:04] Tecno b1g fdl file need
[11:48:38] Found 5 files b1g
1. Tecno_B1g_SP559ABC_QGo_OP_210910V014
2. Tecno_SP7731E_10_B1g_SP559ABC_QGo_OP_210402V010_QP1A.190711.020_sp7731e_1h10
3. Prestigio_Prestigio_PSP3471_SC7731C_TL47B1G_7.0.20180625.1.0.09_PSP3471DUO
4. Prestigio_SC77
[11:47:34] Found 40 files bg1, search limit is 20 files per server
1. Symphony_Symphony_FT37_WBG1302SY_0201_PCB01_gprs_MT6250_S00
2. Gionee_WBG1305GI_0201_PCB01_gprs_MT6250_S00.1305GI_0201_V2034_Gionee_L700
3. Alcatel_TCL_MT6572_ALCATEL_OT_4015X_2AVVBG1_Yaris35_GSM_4.2.2_ALPS.JB3.MP.V1
4.
[11:22:26] Is what am using
[11:14:49] Use CM2-MT2
[11:14:29] Yes is an MTK phone
[11:13:43] Yes
[11:12:24] Is it an MTK phone ?
[11:09:31] Yes
[11:03:52] Am so tired of this phone have been on it since
[11:03:22] Plz house help me how can I remove frp on tecno KG5j with cm2 pls🙏🙏
[10:49:11] help
[10:36:13] file/ ta1212
[10:35:41] file/ ta 1212
[10:31:41] Trying to smart reset
[10:31:29] Infinix x6819
[10:31:10] Someone should help me with this please
[10:29:07] hello please hel nokia c1 second edition network lock
[10:05:36] help how can i remove password pattern for nokia TA-1380
[09:57:38] Download pack loaders !
[09:55:53] I have download the cm2sp2 v2.14 and I did not see anything like tecno in it
[09:33:35] Onder where it found
[09:29:16] Go Onder setting untick EMI
[09:21:30] Any help
[09:11:12] Imei not105G
[09:09:14] hag on log... i need flashing file please
[08:48:34] But the setup am having is v2.34
[08:37:39] https://www.youtube.com/watch?v=OvWpxv3YOc8
[08:35:53] What error do you encounter while using cm2mt2
[08:35:15] Mtk
[08:34:48] Chipset?
[08:34:22] Plz who have use cm2 to remove frp on tecno kG5 pls help
[08:17:39] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : Hisense HLTE228E Loader file.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot se
[08:04:12] No solution for me Admin?
[07:47:13] Ok
[07:22:25] Meaning???
[07:20:51] No
[07:20:49] Not reply
[07:19:55] Yes available
[07:19:02] Anyone with the idea of how to permanently flash easybuy phone ?
My customer just told me my work was just a temporary one
[07:15:19] Then select
[07:14:58] The phone is only using preloader
[07:14:05] Try to use default loader and check on local sla
[07:13:33] Da not supported
[07:13:20] Because I have tried different loaders all are giving the same error
[07:12:38] Oppo A16k hard reset, please in cm2 which loader is the best for this phone
[07:01:14] What takes to send pics bro just do as I say
[07:00:56] Also go to settings >about phone >software information snap and send pics
[07:00:50] It shows invalid SIM card
[07:00:37] Insert sim send pics
[06:59:48] Wiko u300
[06:59:37] Mtk
[06:55:30] Nvram file
[06:55:16] Device chipset?
[06:54:46] Not yet
[06:52:39] need select preloader manual
[06:52:34] As it\'s legecy
[06:48:45] Preloader not boot.Only brom mode 😕
[06:40:40] use prelaoder
[06:40:15] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6582 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : MEID : 8A12D6D469CD130ED491015EBA833FC9
BROM : SecLevel : 0x00000000
BROM : SecMode : PLA
[06:34:40] under setting untick firefly auto emi repeat
if same need use prelaoder from scatter
[06:33:25] Operation : Check / Read Info [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select d
[06:32:17] ok
[06:32:08] Use old mtk module 1.58
[06:28:10] Load IDBase v312457 Ok!
Update configuration ...
Load IDBase v312457 Ok!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6582 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : MEID : 8A12D6D
[06:27:03] CMMT2 not boot Prestigio 3057.Pleas help
[06:09:04] Use cm2mt2 bro
[06:06:05] Help on how to remove for on tecno KG5j with cm2
[06:05:58] Uncheck auto emi in settings
[05:56:38] Did you manage?
[05:40:30] On cm2
[05:40:19] Hello pls how do I select to do frp of tecno Kg5j
[04:33:02] Oppo a33 -2020 pattran unlock file needed
How much
[04:30:44] No
[04:30:14] Found 1 file cph2035
1. Oppo_Realme_CPH2035PU_11_A.29_201124_Extracted
[04:23:34] Flash
[03:05:36] I rename this file from
HLTE228E_01.fg to
HLTE228E_e50_01
[02:55:24] this one not booting
[02:54:43] this created yesterday
[02:53:57] yes is created
[02:53:07] Now check after boot with pac auto loader created and added in infinity
[02:52:08] yes but not with boot pack
[02:50:58] It\'s Booting already what issue
[02:49:57] Platform Version: MOCORTM_TRUNK_V2_W20.36.1_P4_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_TRUNK_V2_W20.36.1_P4
HW Version: sc9863A_modem
CMP_Time : 07-02-2021 18:51:50
MODEM TAG : MOCORTM_TRUNK_V2_W20.36.1_P4_Debug_FM_BASE_TRUNK_V2_W20.36.1_P4_sc9863A_modem_sharkl3_pub
Reconnect Power/Cable!
Done!
Elapsed: 00:00:20
Operation : Read FW [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
W
[02:49:57] Card found : 5D460AE2 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
VER : BP_R1.0.0
LEN : 002F623E ( 2,96 MiB )
CPU : s9863a_xx
VER : Hisense HLTE228E Loader file
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
>>> ERROR : Protocol HandShake failed!
>>> Error : Fail to init protocol!
>
[02:46:36] It\'s gone but I\'ll log on my pc
[02:42:24] Send more details about phone version
[02:40:05] I tried the hlte228e in boot-pack it\'s no longer working bro. Check it
InfinityBoxTalks 2022-06-15
[22:42:11] Apple
[22:41:58] Quallcom
[22:38:53] What is update
[22:38:34] Helow
[21:27:38] X6819
[21:27:18] How can I solve this error I\'m trying to smart reset infinix note 12i
[20:48:32] Infinity please add Samsung frp reset AUTO ENABLED USB ( add in CM2 AST TOOL) ❤️
[20:34:20] inbox is little bit forbidden here, you may get ban
if you know how to fix write here for everybody
[20:33:43] try with another loader selection
[20:32:04] Found 1 file L5502
1. iTel_L5502_SU375_8.1_IN_V038_20201030
[20:31:48] is it stuck at boot logo?
[20:30:43] what is the result with uploaded loader? Is it Ok?
[20:29:30] boot-pack has HLTE228E loaders
[20:27:38] have you tried to flash or reset?
[20:26:28] copy/paste complete sw log text
[20:25:07] also you must use good cable and change usb port
[20:24:33] select one of the built-in loaders
[20:23:32] He is liar and for the next lie he will get parmanent ban
[20:22:08] use CM2SP2.exe
it may take credits for this model
[20:17:57] you can use one of the built-in loaders
[20:07:37] Remove the battery wait for 20 seconds put back the battery n repeat the operation using Brom mode.
[19:52:34] Cm2sp2 server needed 5 credits!
[19:36:54] Okay so the support should consider it on the next update
[19:32:15] Relme narzo 50i rmx3235 imei repair solution plz
[19:29:48] Retry now bro
[19:26:55] This error
[19:26:43] It will identify successful but when trying to unlock bootloader it stop and show error
[19:20:58] Okay
[19:15:27] Try with cm2sp2
[19:07:04] ♻️ *Xiaomi Mi Account Lock Remove (Worldwide)* Clean 100% Success (China Not Supported)♻️♻️
👉 *Direct source 👈👉TIME-5-m Max-30 minutes* 👈
🌹 *100%* *Success ✅*
👉 *Price down* 👈👈
_
http://wa.me/+923327298332📥l
[19:06:16] Network unlock with cm2 anyone with a solution its spd
[18:31:17] Bro use default mode and checked on local sla , then try to identify
[18:30:58] Volume up plus power
[18:29:18] I choose Raphael v2
[18:14:49] So what do you choose
[18:13:42] If automatically, then first disconnect both volume then if not full flash
[18:12:57] Hope you antivirus is turned off?
[18:12:20] What result to this?
[18:08:00] Try using another firmware bro
[18:07:18] No one is a lecturer here, so tell us what you really need based on the device with you
[17:58:25] Sure?
[17:44:34] cm2 qlm will never be updated !!! When the cm2 team intended to update the qlm tool, it had to update the qlm tool, even if it was by copying and pasting it.
[17:17:38] The latest boot pack doesn\'t contain x665 b boot
[17:10:46] Have update but x665b not there
[17:10:20] Update the boot pack and select it\'s loader manually, it\'ll work
[17:03:12] Pls some one help with this
[16:35:37] Infinix x665B boot loader unlock not working with cm2 someone pls help this is what is saying
[16:25:49] Full flash
[16:08:55] lg k2 problem fastboot
[15:45:19] How to solve this issue
[15:26:19] How to solve this infinix x683
[14:23:19] @admin
[14:10:21] Pls need help
[14:10:20] Infinix x5515 nvram damage need urgent solution
[13:25:27] thnx bro
[13:25:21] Mi 3 Done by Eft pro other tool failed
[13:18:18] New security Find new loader
[13:14:19] Any solution
[13:14:03] Nokia fire tools
[13:13:50] Card found : 55F43A97 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
VER : BP_R1.0.0
LEN : B2D743C5 ( 2.79 GiB )
CPU : A661W
VER : A661W-V390AE-11.0-OP-V006-20220109_0212
Open : A661W-V390AE-11.0-OP-V006-20220109_0212_user.pac
VER : BP_R1.0.0
LEN : 2.79 GiB
CPU : A661W
VER : A661W-V390AE-11.0-OP-V006-20220109_0212
Reading package ...
Read package finished!
Product Brand : Itel
Product Device : A661W
Product Model : itel A661W
Product Name : A661W
Patch
[12:42:29] How to use cm2mt2 on samsung android mtk based phones ...and what features can i get
[12:13:43] Itel L5502 v38 flash file
[12:07:48] Pls how do I reset this nokia phone
[12:03:04] You will need to remove the battery then
[11:54:09] I\'ve done that but no way
[11:47:52] try hold all keys
[11:45:10] It went off when I tried to smart reset. Is there any way I can wake it up without removing the battery?
[11:43:41] thanks sir
[11:28:59] Good
[11:27:51] Seems to be A225f
[11:27:11] all
[11:27:08] tag all
[11:23:52] Write good nv
[11:22:12] Samsung what
[11:21:44] samsung MDM/KG LOCK,,,DONE infinity cm2mt2 module,, erase rmpb methode,, next flash file offcial
status done ,,thanks infinity team
[11:20:16] Okay
[11:16:19] or wrong file using
[11:16:14] possible wrong flashed
[11:15:57] What could be the problem here
[10:54:05] FRP Problem
[10:53:53] Acer B3-A20
[10:53:44] Operation : Reset Settings/Format FS [ v2.33 ]
Mode : SMART RESET EXTRA
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM44)
MODE : PRELOADER PORT
PORT : 44
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT8163 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM :
[10:49:17] Common error. Inbox 📥📥
[10:41:49] Sorry by mistake mft post done in infinity
[10:37:22] Spd or mtk?
[10:35:23] Nokia Ta 1264 network unlock
[10:26:46] Imei is Ok
[10:01:21] vivo new
[10:01:08] hj test mt6768
[09:56:03] VIVO Y15s (V2125) FRP REMOVED BY MFT
[09:46:41] check IMEI
[09:44:57] Hello team, flashed itel P33 but no service any help 🙏🙏
[09:23:57] Yes bro might kill device if care is not taken
[09:15:22] Testpoint pls send bro
[09:13:46] Welcome to unlock iCloud clean slow service
13/13Pro/13 Max/ Clean 180$
12/12Pro/12 Max/ Clean 150$
11/11 PRO MAX/ Clean 140$
XR/XS/XS-MAX/ Clean 135$
Contact US: @Unknow_unlocker_224
Join Channel: https://t.me/unknow_unlocker224
Join group : https://t.me/applehousechat
Payment Method 💳
USDT Only
[09:09:04] Huawei Y9 prime
[09:07:36] Seriously
[09:07:30] Wow
[09:06:58] Try to check on local sla and retry
[09:05:35] Let owner know particularly on this device that Flashing it is 50/50
[09:05:23] Symphony i95 emmc change after boot problem.
Fdl not started. error.
[09:04:35] Try to it SC model and use with inbuilt loader
[09:02:45] .I need help how to check Huawei modle number
[08:59:21] Fixed?
[08:56:37] Nothing found for invens a12
If you will get the file upload it to support with iosFileUploader
[08:56:00] Use tp
[08:48:41] Any solution to unlock
[08:48:34] Vivo y73 brom locked model
[08:40:44] Hello everyone, a question for the administration, when is a Qualcomm cm2 update
[08:35:52] Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM21)
MODE : PRELOADER PORT
PORT : 21
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Krug
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : Vivo : SEC_MT6765 | Manual : Disabled
AGENT : Look for suitable BootChain in
[08:29:06] Ok help me with solutions plz
[08:27:29] Not supported by cm2 tools but solution available
[08:26:22] Plz team am still waiting for answer to oppo A15s Network unlock Plz
[08:23:08] Redmi 9 failed to Repair imei
[08:21:50] Use cm2mt2 bro
[08:06:00] Huawei TIT Y6 pro Da file please
[07:28:06] Is this cm2
[07:26:10] Huawei TIT CL10 hang on logo solution please
[06:56:59] 9o
[06:54:02] Android 11 , Jan 2022 security level
[06:53:35] Samsung A035F/DS Spd platform posible to remove Frp with cm
[06:39:24] spd or mtk cpu?
[06:31:09] Please 🙏 help
[06:19:55] Please admin help me out.
[06:14:58] Yes not working all loader
[05:43:48] Pls help. It cancels when I try to flash Nokia 2690.
[05:10:38] Log
[04:21:08] Please I need infinity best 2.29 for nokia
[02:37:04] this not frp sir
[02:08:22] EMMC: CID : 150100464536324D420603DDAAA8C58B
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 464536324D42 : PRV : 0x06
EMMC: VEN : SAMSUNG : FE62MB
EMMC: SNN : 64858792 ( 0x03DDAAA8 ) , MF : 12/2018
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RN
[02:08:22] DA : USB : HIGH-SPEED
Boot done!
[FL] : HW verification passed!
[FL] : Pre-Flash backup
Backup sensetive data [ 18 ]
Backup path : Backup\\MT6739__3673EA1205B0DB2F1F4EEBBDBACCA4BA\\
Backup done!
[FL] : Pre-Flash backup passed!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000001700000
Erase : 0x0000000001F00000 : 0x0000000004010000
Erase : 0x0000000007800000 : 0x0000000000A00000
Erase : 0x0000000008500000 : 0x0000000007200000
E
[02:08:22] Card found : 5D460AE2 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Load IDBase v312457 Ok!
Operation : Write Flash [ v2.34 ]
Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Disabled
Files :22
[FL] : Set : preloader_dura.bin
[FL] : Set : md1img.img
[FL] : Set : md1dsp.img
[FL] : Set : spmfw.img
[FL] : Set : m
[01:56:24] Done Dra-lx5
[01:54:49] UltraFlash : OK!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : RePartition
[FL] : RePartition Ok!
[FL] : Flashing finished!
Done!
Elapsed: 00:01:16
Reconnect Power/Cable!
[01:54:48] PTFN : MediaTek USB Port_V1632 (COM78)
MODE : BOOTROM
PORT : 78
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 3673EA1205B0DB2F1F4EEBBDBACCA4BA
BROM : SecLevel : 0x000000E3
BROM : SecMode : SBC+SLA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3EBA423E7E9A956FE30BA52F658DC09E07A192FC164D65F1661BCD837DC5B590
BROM : SLA : Local Auth
BR
[01:54:48] PTFN : MediaTek USB Port_V1632 (COM78)
MODE : BOOTROM
PORT : 78
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 3673EA1205B0DB2F1F4EEBBDBACCA4BA
BROM : SecLevel : 0x000000E3
BROM : SecMode : SBC+SLA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3EBA423E7E9A956FE30BA52F658DC09E07A192FC164D65F1661BCD837DC5B590
BROM : SLA : Local Auth
BR
[01:54:48] EMI : DEV : MT6739
EMI : SRC : preloader_dura.bin
EMI : CNT : 000B
EMI : [00] : eMMC : DDR3 : ID : 150100464536324D42 : VEN : SAMSUNG | DEV : FE62MB : RAM : [ 1,00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 700100454841434438 : VEN : KINGSTON | DEV : EHACD8 : RAM : [ 1,00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 450100444634303136 : VEN : SANDISK | DEV : DF4016 : RAM : [ 2,00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2,00 GB ]
EMI : [04] : e
[01:54:47] SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]
EMMC: CID : 150100464536324D420603DDAAA8C58B
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 464536324D42 : PRV : 0x06
EMMC: VEN : SAMSUNG : FE62MB
EMMC: SNN : 64858792 ( 0x03DDAAA8 ) , MF : 12/2018
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]
CHIP : MT673
[01:54:47] CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 5A3C09A37ADDB678C79C6FD7A9250DC9
DA : USB : HIGH-SPEED
Boot done!
[FL] : HW verification passed!
[FL] : Pre-Flash backup
Backup sensetive data [ 18 ]
Backup path : Backup\\MT6739__3673EA1205B0DB2F1F4EEBBDBACCA4BA\\
Backup done!
[FL] : Pre-Flash backup passed!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000001700000
Erase : 0x0000000
[01:54:47] DRA-LX5 stuck on boot, keep restarting, no factory reset or fastboot mode. Sometime pc get Blue screen and shutdown while frp reset.
Do This👇🏾
✅✅✅✅✅✅✅✅✅✅
Card found : 5D460AE2 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
Update configuration ...
Load IDBase v312457 Ok!
✅Operation : Write Flash [ v2.34 ]✅
Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup :
InfinityBoxTalks 2022-06-14
[23:40:31] Please send the link here
[23:40:31] Is it gonna work my dongle is expired already
[23:40:30] install SPD SoC drivers
[21:49:48] https://forum.gsmdevelopers.com/infinity-box/19711-cm2-qlm-conectivity-download-driver.html
[21:48:57] Nothing found for cm2 Qualcomm driver
If you will get the file upload it to support with iosFileUploader
[21:46:20] Can you help me ?
[21:46:13] Bro m\'y qualcomm module not found phone. I use windows 10 64bits
[21:44:57] Qualcom uplate plese
[20:40:11] When it comes to MTK and SPD infinity team is the Best. Just make Qualcomm module very active that\'s All. Reset frp, write firmware, factory reset, etc. Especially oppo, Huawei and Xiomi Devices
[20:33:42] Kirin
Qualcom
Exynos
[20:20:11] Rest frp by any tool if cm2 spourt your model then do it
[20:20:03] Nothing found for x665b
If you will get the file upload it to support with iosFileUploader
[20:18:09] Not working at all
[20:16:01] Repair network and smart rest
[20:10:02] Cm2 is lazy in network unlock!!
[20:08:02] Please guys any idea for invalid SIM card for wiko u300
Please help
[19:58:06] Plz infinity team I tried to unlock oppo A15s network locked but infinity couldn’t do the network unlock
[19:37:07] REINSTALL the Software
[18:39:41] Yes please help us out why this is not working
[18:10:28] how to solve this?
[18:05:39] HLTE228e E50
[17:12:01] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r
[17:12:01] I want to activate cm2 card
[16:53:38] whats the problem ?
[16:09:08] 🔥Xiaomi services🔥
BEST price in market.
Xiaomi mi account Europe clean 💯 instant
Xioami mi account Worldwide clean instant 💯
Xioami mi account Morocco clean instant 💯
And more countries🔥🔥
Exclusive offers
By : source-gsm.com
[15:40:12] Ok thanks
[15:39:46] U need to enable from dongel manager and add uk.off to application
[15:38:12] Have uninstalled and reinstall still not working...help
[15:37:31] My mt2 exe is not opening up. Only blinks logo and not show up
[15:34:46] My infinity do not support imel repair I don\'t know why
[15:33:10] Try repair imei should work if supported soc
[15:32:50] What is the soc...
[15:26:51] Can I do it with infinity cm2?
[15:20:26] Yes
[15:18:35] Can I repair imel for hisense u50 lite?
[15:00:30] KG5K NVRAM
[14:52:49] INFINX X650D Nvram File
Please who can help me with this
[14:45:22] Please send the link here
[14:35:15] I HAVE NOKIA 2600 NETWORK UNLOCK
[14:32:03] Is it gonna work my dongle is expired already
[14:07:00] Select but same problem
[13:16:44] select another loader
[13:15:59] Found 2 files Rm-969
1. recent_Nokia_RM_969RIVENDELL50_PCB01_gprs_MT6250_S00.RIVENDELL_10_03_11_P1
2. recent_Nokia_Nokia_220_RM_969_07062014
[13:15:43] install SPD SoC drivers
[13:15:30] Make this https://infinity-box.com/?r=100155
[12:55:40] Nokia 220 firmware plz
Rm-969
Code 059V1W9
[12:43:31] What is this problem
[12:41:31] Huawei sne lx1 frp unlock solution
[12:05:39] Iphone 6s
Iphone 7
Ios 15
Without sim
How to bypass?
Any free solution.
Without mac solution.
Mobile is on HELLO SCREEN.
[11:36:59] # not working
[11:34:11] DONE FRP SPACK 8C KG5j
[11:33:44] Operation : Reset Settings/Format FS [ v2.34 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : Miracle PreLoader USB VCOM (Android) (COM8)
MODE : PRELOADER PORT
PORT : 8
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00
[11:29:57] Ok
[11:22:46] Pls need help
[11:22:45] Infinix x5515 nvram damage need urgent solution
[11:06:26] Cm2
[11:06:01] Nothing found for tecno kg5j
If you will get the file upload it to support with iosFileUploader
[11:05:36] Nothing found for kg5j
If you will get the file upload it to support with iosFileUploader
[11:05:24] tecno kg5j da file pls
[11:00:15] Please support bro
[10:50:21] https://forum.infinity-box.com/viewtopic.php?t=5624
[10:49:47] Ok sir
[10:49:05] you send the same log again!
you must select another loader!
[10:48:35] Loader issue bro
[10:48:06] How to fix CM2SP2 connection issue https://infinity-box.com/?r=100192
[10:48:06] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!
[10:46:47] Select correct loader
[10:46:23] Send log
[10:46:05] Cm2mtk
[10:45:59] Nothing found for A309W
If you will get the file upload it to support with iosFileUploader
[10:45:42] Turn off your anti virus
[10:45:40] Nothing found for v521
If you will get the file upload it to support with iosFileUploader
[10:45:11] install SPD SoC drivers
[10:44:56] try all loaders all by one or use original pac file as loader
[10:36:23] My spd module only not working other modules working please help me thanks in advance 🤝
[10:22:50] model?
[10:22:16] Sir I trying one by one all loader giving Sam error
[10:21:36] select another loader
[10:19:47] How to fix CM2SP2 connection issue https://infinity-box.com/?r=100192
[10:19:47] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!
[10:19:17] online tool
[10:17:59] Stil not by any except jitag😏😏😏😏
[10:17:15] the phone is not suported yet by cm2
[10:16:30] I do identify device select 7731e all boot but giving error
[10:14:12] Nokia TA-1380 password reset....any one can help....?
[10:09:02] guys i need help firmware itel A23s and itel A23 pro
[09:58:17] Sorry A509W nv file
[09:51:28] T402:password unlock
[09:47:57] T402:password unlock
[09:47:49] Please I need LG v521 firmware
[09:46:29] After erase flash now No Service
Imei is ok
[09:45:52] Itel A309W NV FILE PLEASE
[09:35:01] try with # key
[09:32:56] It says failed to convert data av to uac
[09:32:25] My cm2 keep saying this when I want to format
[09:17:53] https://www.google.com/search?q=0x000007b+error
[09:17:37] https://www.google.com/search?q=0x000007b+error
[09:12:22] Somebody help with boot key TA-1203 SPD
[08:56:42] CPH1717 Oppo A71
[08:56:30] restored security backup did the job. 👌
[08:56:02] yeh bro. mobile came hang on logo. then i flashed it using CM2M2. phone alive. but IMEI null.
[08:54:20] Cool bro
[08:53:13] Download file and use cm2sp2
[08:51:56] Bro this is frp, what\'s the model of device?
[08:40:12] 👌
[08:25:42] read by Diag mode
[08:25:29] Platform Version: MOCORTM_20A_W21.15.3_P5_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_20A_W21.15.3_P5
HW Version: sc9863A_modem
05-14-2021 22:02:21
Build number: k630_64-user 11 RP1A.201005.001 1635751922 release-keys
EMMC DDR SIZE :30.00 GB+3.00 GB
UID: 8f93debd89b6b6097291449f0bc652bb764e502f92a36cfa62f38fa15596746f
[08:23:42] not show enter code
[08:23:36] lock network
[08:23:27] phone lock network code
[08:23:07] i want buy
[08:23:00] SPD
[08:22:57] WIKO Y82 W K630
[08:22:27] help plz
[08:22:24] Try here @FlashFileSearchBot
[08:22:24] any one have file wiko y82
[08:21:48] Found 1 file y82
1. Rover_RoverPad_MT6582_alps_Air7.85_3G_esky82_tb_jb5_4.2.2_ALPS.JB5.TABLET.MP.V1.19
[08:21:32] good, the loader is free all over the Internet, forums, try it yourself, test it, the user who mentioned it has not put any log, so at the moment it is not credible or true
[08:21:29] #y82
[08:13:21] Found 9 files hot 10
1. recent_MT6580_HOTWAV_Cosmos_U_8.1.0_T2TEM81E.TUG.HOTWAV.HB.FW.D1FLBAPLPM.1030.V3.01_O11019_Cosmos_U
2. recent_MT6580_HOTWAV_Cosmos_8.1.0_D8098_HOTWAV_T8_S1_Cosmos_648_FWVGA_Auto_V01.01B13_O11019_d8098
3. X_Tigi_MT6580_VSUN_X_TIGI_Photo_P16_8.1.0_V13_O11019
4.
[08:10:17] Found 4 files ta-1174
1. recent_Nokia_nokia_ta_1174_spd_file
2. noname_copy_M915F_7_PCB01_gsm_MT6260_S00.M915F_7_V1_copy_Nokia_TA_1174
3. noname_copy_M118_61D_PCB01_gprs_MT6261_S00.M118_IJ_191221_V01_copy_Nokia_TA_1174
4. N_105_N_10
[07:43:20] Found 13 files KD6
1. Tecno_KD6a_H6118AC_QGo_OP_210806V200
2. Tecno_KD6_H6116I_QGo_ZAVC_201211V25
3. Tecno_KD6a_H6118AC_QGo_OP_211009V202
4. Tecno_KD6a_H6118AC_QGo_200325V115
5.
[07:36:02] Don\'t say!
Is it possible with cm2?
[07:24:31] Guide me through it mate, i had given up
[06:51:19] Sir how can I flash cpu spd
[06:50:03] how to solve this? baseband OK. but IMEI is NULL
[06:49:47] CPH1717 IMEI NULL
[06:39:05] Nothing found for cph1825
If you will get the file upload it to support with iosFileUploader
[06:24:07] Hi guys, I\'m trying to read info for Mi note 8 pro but I\'m getting error
[05:42:22] Hand only hard reset
[05:22:48] Good morning
[05:20:25] https://youtu.be/hoK_ZlZxizs
[04:43:47] What box/Dongle did you use to wipe the phone?
[04:42:11] not supported
[04:40:33] Please I need help how to repair IMEI REALME 5 Qualcomm?
[04:33:52] Hummmmmm just hard reset done ✅
[04:26:38] http://surl.li/ccoij
http://surl.li/ccoij
[04:15:01] No todos invertirán en esta empresa debido a las pequeñas ganancias, solo un inversor real 💤 cryptobrite.ltd 💤 Una de las mejores empresas para obtener buenas ganancias en esta empresa, depende de cómo inviertas en la empresa
Haz clic en el enlace 🔗🖇️👇
👇👇👇
https://t.ly/Phae
https://t.ly/Phae
[03:18:16] This is TECNO pova ld7
[03:15:21] I encountered this error after reprogramming the phone.
If I uncheck the preloader , it takes the file
[02:35:53] hello sir need help,, samsung knox cloud service if i use this method it becomes bootloop
[01:34:16] unfortunately the phone not going on recovery mode
only download mode
[01:32:02] go to recovery do factory reset and wipe cache next is reboot system
[01:29:40] Samsung keep restarting battery ok
switch ok
i flash it but still keep restart.
J7 MODEL:j710f/ds
what other solution guy!
it may be hardware fault??
InfinityBoxTalks 2022-06-13
[23:00:25] Lg stylo 5 android 10
Frp solutions please
[22:47:16] M. P
[22:47:07] Thank you
[22:46:48] Download - MEGA
https://mega.nz/file/UHokEIRY#ZK0Mo7Usy4xYqKs6p6uTA8H5O-MCHfcwL7YhJb4HjHY
[22:45:35] Please help me with files
[22:45:07] Download UK off files and paste them in all the tools folders
[22:44:01] Cm2 Spd2 imei not showing even when uk is turned off
[22:33:53] perfect!
install mtk drivers well, reboot pc and follow th previous advice regarding boot mode selection
I am waiting for your software log text for all your tries at support forum.
[22:31:59] Dimensity 9000
[22:31:29] cpu name?
[22:31:16] Redmi k50 pro 5g
[22:30:26] and what is your phone name?
[22:19:45] your issue - you must try and select another base/model/cpu or DA
[22:19:04] I don\'t see any video relevant to my issue
[21:55:43] do not spam or you will automatically be banned, delete the message
[21:50:52] EL ÉXITO USUALMENTE LLEGA A AQUELLOS QUE ESTÁN DEMASIADO OCUPADOS PARA ESTAR BUSCANDOLO
NO TE DEJES DISTRAER POR LAS CRÍTICAS RECUERDA QUE LA ÚNICA PRUEBA DE ÉXITO QUE ALGUNAS PERSONAS TIENEN ES MORDIRTE A TI
REGÍSTRESE AQUÍ CON MI ENLACE DE REFERENCIA
👇👇👇👇
http://surl.li/ccoij
http://surl.li/ccoij
AGRADABLE EMPRESA DE CONFIANZA NO DEJES PASAR ESTA OPORTUNIDAD
[21:22:17] blockchain-based decentralized VPN and firewall solution
[20:32:06] And re-flash the file
[20:31:40] Unlock the boot loader
[18:57:42] Some file are missing check extracted file there is file named other file i think put it into main folder where there is scater then flash again
[18:27:46] Download another firmware and flash.
[18:15:55] Read from alive and write into this
[17:55:15] Nokia 2.4 after flash with cm2 .fhats the result.help me revive it team
[17:51:11] here https://infinity-box.com/support/
[17:50:52] select another base/CPU
result?
[17:38:14] 👆👆👆
[17:33:03] help
drivers soc spd install ✅
[17:04:22] solution please
[16:53:49] Any solution
[16:52:36] Any one
[16:52:33] Nokia c2 unlock tools
[16:36:40] iPhone 8plus 15.5 iCloud lock any solutions please
[16:33:14] kindly be of assistance
[16:32:28] Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM22)
MODE : PRELOADER PORT
PORT : 22
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BR
[16:30:13] stil same
[16:30:06] have restarted my pcs
[16:30:05] iPhone 8plus 15.5 iCloud lock any solutions please
[16:29:51] stopping here
[16:25:06] on tecno bd2d
[16:24:55] showing me invalid pointer
[16:24:29] boss,how do i solve this
[16:23:49] I have my infinity box since I use it it is with SPD and mtk I manage to work the other functions do not pass needs explanation please🙏
[16:16:56] https://youtu.be/kTJVso2_deo
[16:16:52] post sw log text
[15:55:58] X665b unlock bootloader not working any help
[15:48:18] please see here videoos how to use software https://www.youtube.com/infinitybox/playlists
[15:41:21] Load IDBase v312457 Ok!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM10)
MODE : BOOTROM
PORT : 10
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT0907 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : MEID : 254085AD0E1098872ACE7332809D55EC
BROM : SecLevel : 0x000
[15:39:20] Didn\'t work
[15:33:40] post sw log text
[15:22:13] i want to unlock bootloader
[15:21:59] can not do anything even identify
[15:17:56] Please help FRP MI9
[14:46:28] use built-in loader!
[14:41:54] Any help mobicel neo loader spd
[14:33:43] ISP
[14:23:19] Perfect!
Next time use official web site and never send your selfies or photos, only software text
[14:22:06] Thanks for all cm2 best user
[14:20:42] Post sw log text to support forum https://infinity-box.com/?r=8
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[14:20:27] ???
[14:20:04] sw log text
[14:19:23] The phone become disconnected
[14:18:48] plz any solution for oppo a5 2020 password unlock
[14:18:44] do you mean phone become disconnected or do you mean softwre become closed?
[14:17:29] It is auto disconnected
[14:17:18] Not supported
[14:15:38] oppo A5 2020 password unlock 😭😭😭
[14:13:56] first you must check your account and confirm to me credits consumption
[14:12:59] Working perfectly
What is your problem, explain it
[13:44:06] Please help FRP MI9
[13:38:01] not supported
[13:37:37] redmi k50 Dimensity 9000
[13:36:31] complet logs
[13:34:51] help add this cpu
PORT : 10
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT0907 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : MEID : 254085AD0E1098872ACE7332809D55EC
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
Error : Fail to init protocol!
>>> Device not supported for selected operation!
Reconnect Power/Cable!
[12:49:30] Pls I needed help
[12:49:24] And my credit gone twice now
[12:49:07] I have done that still give same thing
[12:48:43] Good day pls am try to unlock Alcatel 5030d with cm2sp2 telling to wait 10-15 and retry
[12:45:38] I have it bro it\'s still not working
[12:38:41] hi
ta-1192 with sim give me error wait
need unlock?
i reset it with best2 not solve
[12:04:22] Samsung a315f mtk deadboot repair?
[11:37:21] but phone not power on
[11:37:13] but i flash with umt there flashing complete
[11:36:52] yes i try many time
[11:36:18] try to flash several times. If it stuck at the same stage it may be faulty flash chip
[11:32:08] i try to flash nokia 6 ta-1021 but stuck here
[11:21:05] emcp problem ?
[11:20:44] why showing this error
[11:20:44] Download latest bootpack bro
[11:20:31] Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : A571L_A26
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART :
[11:18:58] https://youtu.be/DTKznfzTe9k
[10:54:00] Tecno F1 cant mount cache/ system even after flash
[10:29:03] Nokia t20 ta-1397 network unlock solution pls
[10:27:49] Same problem no change
[10:26:41] Hello who can help me with windows 11 download link🤲
[10:24:52] see this video sir this might help you
[10:24:36] https://www.youtube.com/watch?v=A1LxUqd9mLc
[10:15:29] How to Samsung A32 frp reset with cm2mt2 🙏
[10:12:19] select another loader
[10:12:11] Ok
[10:12:03] Perfect.
Just want to remnd you that here is Infinity group.
If you need support for other tools you should contact to other supporters.
[10:11:18] Select other compatible boot!
[10:08:20] RMX3263 tryed loader from bootpack
[10:07:09] How to fix CM2SP2 connection issue https://infinity-box.com/?r=100192
[10:07:09] Mode : Reset FRP
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Realme : SC9863x_eMMC_3GB_1S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!
[10:02:33] but i re new it on October 22 /2021 for one year wich means should be expr on October also
[10:00:17] I see nothing my friend
[10:00:16] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[10:00:16] INBOX
[09:59:41] loaders are built-in and also there
[09:59:16] Buy Infinity here https://infinity-box.com/buy/
[09:57:28] I don\'t have loader file
[09:56:20] i got this error guys jow to solve ... internet fine date and time fine but i cant update my nck dongle
[09:54:01] Yes paid
[09:40:20] Please help me please
The mobile is connect and disconnected
[09:19:17] 👍
[09:18:15] https://t.me/InfinityBoxTalks/93157
use this logger and upload data to server without [BEST]
[09:16:03] Don\'t have infinity BEST activation.
CAN I use this sl3 tool?
[09:13:31] Thank you
[09:12:03] nothing
[09:11:42] nothing
[09:08:22] Click here @FlashFileSearchBot and type there phone name. You will get links
[09:08:13] use default loaders
[09:07:27] Nothing found for sanza
If you will get the file upload it to support with iosFileUploader
[09:06:55] Please bi need this firmware
[09:06:47] another way
[09:06:38] run Infinity BEST and do the job
[09:05:08] next password protected file gives you ban
Good luck!
[09:03:21] reboot PC and try again
[08:54:11] please password for that file
[08:46:49] Thanks in advance ❤️🤝❤️
[08:46:34] Please I need tool link for this 👆
[08:34:43] Why is the dongle best not updated?
[08:29:21] Nokia ta-1385 network unlock solutions sir
[08:25:43] Hi guys anyones how do l remove frp on itel p38 l can\'t find the model number on the new boot pack
[08:25:18] Thanks bro
[08:24:35] it willauto enter in recovery format data from there it will beok
[08:24:24] wait some time
[08:23:57] Oppo A16 now stuck on recovery mode after cm2 flash
[07:59:47] Any solution
[07:48:53] do dl fix using latest exe
[07:48:27] sir can you say me to fix download not complte oppo reno 3 pro
[07:47:28] do dl fix using latest exe
[07:47:07] oppo reno 3 pro
[07:47:06] oppo cph2035 oppo reno pro indian version download not complte how can i fix need help
[07:30:56] How to remove frp Samsung A32 with cm2mt2
[07:24:22] Ok, good
[07:24:15] Yep I think so because I have tried with 3 firmwares.
[07:23:46] you can try with other firmware or loaders but it may be faulty emmc chip
in this case you must replace emmc
[07:23:07] It worked for me!
[07:22:38] wrong way
[07:22:25] Delete cm2 folder ,then reinstall setup!
[07:22:20] Fix your PC https://infinity-box.com/?r=100103
[07:12:09] Why is the dongle best not updated?
[07:02:06] Cm2 tools close silently
[06:55:41] QMobile i7i Pro SP7731C hang on logo. Always stuck here while flashing.
[06:53:19] Found 1 file cph2035
1. Oppo_Realme_CPH2035PU_11_A.29_201124_Extracted
[06:53:05] Stop at logo, then cancel
[06:48:25] As in send log here
[06:47:36] My infinity cm2 dongle, when I open it on my computer, it doesn\'t accept opening
[06:46:05] Hi
[06:44:31] Hello
[06:28:40] Cm activation 🙌🙌 msg me 😌
[06:28:03] Soon best of luck 🤞🙌❤
[06:27:55] no this model loader not comes out
[06:27:35] A3s update?
[06:27:34] Work about more software features is in progress, new software will be released as soon as it will well tested.
Please tell us list of required supported CPU types and functions
[06:27:19] Qlm update?
[06:27:14] not all but only for some CPU
[06:26:53] i know there is some loaders comes out for oppo can allow to wipe handset
[06:26:40] kindly please post here only Infinity related
[06:25:54] OPPO(format, wipe keep data, erase frp)
- Oppo A53 (2020)CPH2127 tested
- Oppo A74 (2021)CPH2219 tested
- Oppo F19 (2021)CPH2219-F19 tested
- Oppo F19s (2021)CPH2223
- Oppo F17 (2020)CPH2095
- Oppo A33 (2020)CPH2137
- Oppo A32 (2020)PDVM00
- Oppo A73 (2020)CPH2099
- Oppo Reno6 Lite (2022)CPH2365
- Realme 7i (2020)RMX2103
[06:18:28] You have phone ?
[06:16:19] NO SW LOG SO DONT BELIVE
[05:45:28] how to
[05:33:55] All chipset which old module doesn\'t support
[05:31:59] Work about more software features is in progress, new software will be released as soon as it will well tested.\r
\r
Please tell us list of required supported CPU types and functions
[05:31:59] Need Qualcomm update !!!!!
[05:31:29] Why is the best dongle not updated anymore?
[03:45:04] It\'s using custom loader
[02:59:24] Guy why are you lieing? Cm2 Qualcomm does not have update
InfinityBoxTalks 2022-06-12
[19:57:21] Am here
[19:50:04] I repair 2nd Imei of Poco X3 pro Vayu from UMT RSA method in eng Rom. I get backup of QCN. it shows imei1 0 imei2 (86*************12) but when I flash global rom. it shows NV data corrupt. I again flash ENG rom. write that backup QCN it shows Original IMEI\'s but when I flashed Global Rom It shows nv data error again. although Original imei of that Phone. I erase efs from Fastboot that also doesn\'t help me. what is the problem & how to solve it.
can I flash custom rom for mobile work normally without sim?
o
[18:40:20] Nothing found for doogee x93
If you will get the file upload it to support with iosFileUploader
[18:29:42] Reboot PC
Try to connect Dongle to another PC
Try to insert Smart-Card into another Card-Reader or Box
If problem still exist:
- Remove Smart-Card from Card-Reader
- Clean Smart-Card contacts
- Try to use hot air gun and heat Smart-Card
- Insert Smart-Card back to Card-reader
[18:26:50] Please I don\'t know if any one can help me solve this
[18:22:15] https://infinity-best.com/
[18:19:08] cpu type?
[18:18:15] With infinity Best
[18:17:51] Full flash
[18:08:33] Any solution
[18:05:55] Good night for everyone
A I need your help with hard reset for Nokia Model:RM-920
[18:02:50] Any solution?
[18:02:03] Tecno CH9 fro bypass
[17:50:48] did you see group name before spam here ?
[17:49:40] Miracle thunder dongel support or not miracle power tool
[17:48:12] Miracle thunder dongel support or not miracle power toll
[17:41:25] Team can you rewrite AST and add Samsung frp remove with auto adb enabler. I just giving an opinion?
[17:16:52] Miracle Box All Activation Digital Licence
https://forum.gsmbulletin.com/vbb/2713-post1.html
💥 Miracle Box 💥 (Digital) Version 3.36 (12th June 2022)
👉 VIVO Fastboot EDL Supported
👉 OPPO NEW EDL Supported
👉 SAMSUNG Add FRP Remove and Auto Enable ADB
👉 More th3n 50+ New Models Added
Br [SV] Miracle Team
https://rahulgsm.com/index.php?route=product/category&path=385_388
Contact :- Rahul Soni
https://wa.me/c/918402955490
[17:15:54] pls check youtube how to install spd drivers
[17:11:07] help me through TeamViewer
[17:08:02] Try it now the server is working now
[17:06:05] I did these steps and still the same problem
[17:03:24] https://infinity-box.com/support/
[17:02:54] même problème help me
[17:02:11] send me drivers soc spd here plz ??
[16:33:09] Is working now
[16:20:35] what is your problem?
[16:19:22] Sir when adding hmd mobile on fastboot
[16:18:59] Cm 2 server not working
[16:12:53] Thanks, done now
[16:11:29] you must use support forum https://infinity-box.com/contact/
[16:10:06] Hhhhhhhhhh
[16:08:34] wrong username or password
have you checked it?
[16:04:09] Same issue
[16:02:40] yes, it was upgrade
completed, try now
[15:59:14] Thanks
[15:59:11] Ok
[15:58:46] try again in 15-20 min
it may be server upgrade at weekend
[15:57:24] I have been using for long now
[15:57:14] have you checked it?
[15:56:51] wrong username or password
[15:56:07] Is der a server problem?
[15:55:50] I’m having issues flashing tecno pr651h,
[15:55:31] Found 4 files doogee x9
1. Doogee_MT6737M_DOOGEE_X9pro_alps_mp_m0.mp1_V2.84_vz6737m.65.i.m0_P72_Android_6.0
2. Doogee_MT6580_DOOGEE_X90_8.1.0_DOOGEE_X90_Android8.1_20190318_O11019_X90
3. Doogee_NVM_NV_MT6580_eMMC_DOOGEE_X9_Mini
4. Do
[15:55:21] Nothing found for doogee x93
If you will get the file upload it to support with iosFileUploader
[15:55:12] doogee x9
[15:54:49] Nothing found for doogee x93
If you will get the file upload it to support with iosFileUploader
[15:47:18] Maintenance is in progress, try again in 15 min
[15:47:15] you must enter good working e-mail address
[15:44:37] 😡😡😡
[15:37:01] Give me your personal email to Gmail or Yahoo and I will try it and confirm you right away
[15:36:52] reheat the emmc before change and see results
[15:36:09] you must enter good working e-mail address
[15:35:59] no
[15:35:49] All emails are working fine
[15:35:14] you must enter good working e-mail address
[15:34:39] The problem is not sending the license file to Jamil or Yahoo. I tried three computers, I tried three Gmail emails, I tried a Yahoo email, I tried more than one interface for the Infinity Beast dongle, the same problem was not sending the license file
[15:28:34] What is the problem?
please explain
[15:21:15] Please help not to send the activation file to the Infinity Best Nokia dongle. More than one computer and more than one Gmail have been tested and all work efficiently. More than one interface has been tested and Yahoo email has been tested
[14:55:52] CM2SP2.exe sc7731e
[14:54:16] Yes was that problem but Now not power on
[14:33:40] If mtk chipset use cm2mt2 else use cm2sp2
[14:19:10] Try here @FlashFileSearchBot
[14:19:10] i need file frp itel a14
[14:08:12] ask people here about emmc replacement. It may be your case
[14:07:00] It was hanging at the logo sometimes not everytime
[14:05:28] https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/index1425.html#post14566348
[14:03:08] Can open with tool
[14:03:01] ok
[14:02:01] yes
look here for examples https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/
[14:01:32] you can buy CM2 here https://infinity-box.com/buy/
[14:01:14] This supported sim locked
C30 ta-1269
[14:01:04] Install SPD SoC drivers
[14:00:25] Can u hep me
[14:00:21] Halo
[14:00:20] why the problème
[14:00:01] before?
[13:59:41] ok, no problem
I will type your username to database if/when I will have some time. Stay tuned
[13:58:40] CODE : sharkl3_pubcp_LTEA_DSP.bin
CODE : gnssmodem.bin
CODE : cover.img
ERASE : L_RUNTIMENV1
CODE : tos-sign.bin
ERASE : MISC
ERASE : UBOOT_LOG
UBOOT : u-boot-spl-16k-sign.bin
CODE : PM_sharkl3_cm4.bin
FSIMG : userdata.img
CODE : SC9600_sharkl3_pubcp_modem.dat
CODE : prodnv.img
CODE : sharkl3_pubcp_deltanv.bin
CODE : dtbo.img
CODE : boot.img
CODE : sml-sign.bin
CODE : vbmeta-sign.img
CODE : logo.bmp(1)
FSIMG : persist.img
CODE : gnssbdmodem.bin
CODE : recovery.img
UBOOT : u-boot-sign.bin
FS
[13:53:58] 👆
[13:50:59] blockchain-based decentralized VPN and firewall solution
[13:50:28] blockchain-based decentralized VPN and firewall solution
[13:30:14] what is the username?
[13:29:41] Is it stuck on bootlogo device?
[13:29:23] Fake post
[13:29:18] sw log text?
[13:27:50] jst wait few hours then try again.
that\'s happened when you change pc or hard drive even wifi. Dont worry trey again later
[13:23:45] >>> Error : Security override! Unsupported in selected mode!
>>> Device supported in FLASH MODE! ✅Select SS-base ✅or MODEL loader and repeat under FLASH!
[13:04:55] Plz help i cant login to online servises
[12:38:35] i\'m having the same problem after trying again
[12:38:21] Card found : E365151E , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34
Load IDBase v312457 Ok!
UserName and/or Password not set! Can\'t continue!
Load IDBase v312457 Ok!
Operation : Identify [ v2.34 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM19)
MODE : PRELOADER PORT
PORT : 19
Waiting BOOT ack ...
PRELOADER : ACK
[12:35:38] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
ERASE : FORMAT WHOLE FLASH ...
ERASE : FORMA
[11:53:59] 🙏
[11:46:44] https://forum.infinity-box.com/viewtopic.php?t=5629
[11:45:40] Ask any seller https://infinity-box.com/buy/
send your dongle S/N to seller
[11:41:01] hisense u963
[11:40:36] 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 14330 release-keys
Platform Version: MOCORTM_18A_W21.34.5_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W21.34.5
HW Versio
[11:40:17] Sorry I wrote wrong done via UMT
[11:39:33] I have full flash from Nokia c5.
I need pull out all of file, how can help me please?
I can pay, pm.
[11:37:48] We don\'t believe wet talk, we believe on operations log.
[11:35:06] Cm2 Qualcomm need update bro
[11:31:13] OPPO A53 (CPH2127) screen lock removed done via cm2 Qualcomm mode 100%.
[10:53:18] Cm2 activation needed
[10:52:02] it\'s not like Solitarie game, my friend.
you must configure your PC well for WORK
yu must install SoC Drivers, you must install libusb, you must delete all games.
let me know if you need more information
[10:44:21] Please help me on what to do
[10:43:11] PC goes off when tryin to flash phone
[10:20:05] Trying to fix imei
[10:19:43] Come back to dis
[10:19:34] Won\'t work after doing dat
[08:47:17] try with built-in loaders and get success
[08:41:28] https://t.me/elkhattabigsm1
[08:22:31] Stylo inkosi boot file please
[08:16:51] Click here @FlashFileSearchBot and type there phone name. You will get links
[08:16:37] Sure
[08:16:22] News will be here https://infinity-box.com/news/
[08:07:20] Then perform a factory wipe as is been told, then if condition persists flash with another firmware
[07:26:12] install CM2SP2 boot-pack
also fdl files are at Infinity server / DA- / directory
[07:24:02] How to setup server access https://infinity-box.com/?r=100166
[07:00:27] can\'t load android system.ur data may be corrupt.if u continue to get this message u may need to perform a factory data reset etc
Wat d solution pls
[06:59:58] Hi house.....I nid help on Samsung a50
[06:16:16] Hello need SM-A136U dead firmware fix
[06:08:26] 1l1
[05:43:24] nokia ta-1043
[02:33:01] Okay 👍
[02:30:58] Nothing found for smile Q7 6.0
If you will get the file upload it to support with iosFileUploader
[01:05:10] Found 2 files fdl
1. Kejian_K268_OGREr_DV11Z1_R03.05.64_10409011500.fdl
2. Kejian_K268_OGRE_Er_DV11Z1_R03.05.43_10406301505.fdl
[01:04:12] Found 1 file mobicel rio ss
1. Mobicel_Mobicel_Rio_SS_8.1.0_K110_Dual_MDD_11_03_2020
[00:18:58] Your qualcomm tool work ?
[00:02:15] When update
[00:02:10] Cm2 Qualcomm ????
InfinityBoxTalks 2022-06-11
[23:10:17] inbox is little bit forbidden here, you may get ban
if you know how to fix write here for everybody
[22:54:29] Inbox 100
[22:01:29] The best way to remove admin in mobigo & Alcatel phones
https://youtu.be/uDQvnIl8Xyg
[21:23:54] VERNEE MIX 2 FRP RESET DONE !!✅✅ first read /2 erase partition FRP Wipe
[20:56:32] run BEST and get info
[20:40:17] I don\'t know
[20:09:50] Send me link to download the boot file pls
[19:10:11] What is the imei?
[18:59:03] But not yet
[18:58:53] Ok
[18:58:31] Download SoC drivers from Infinity server here https://infinity-box.com/support/
or here https://infinity-best.com/support/
[18:57:57] When they respond
[18:57:42] Nothing found for Ruio m671m4
If you will get the file upload it to support with iosFileUploader
[18:57:28] Nice selfie
[18:57:00] Ruio m671m4
[18:56:26] What is the phone brand and model name?
[18:55:52] post here hwid
[18:26:09] Drop here the files
[18:25:27] Yes
[18:24:57] Credits 5?????
[18:23:00] Use cm2 sp2 with credits 5
[18:22:36] Dongle not found problem.
[18:22:21] Unlocking files
[18:21:46] Using tool or cm2
[18:21:18] Ruio
[18:21:04] Files
[18:20:52] Anyone can assist me with the firmware M671m4
[18:16:36] Y
[18:16:27] Nope
[18:16:17] Fixed?
[17:52:33] Follow this use 0_base V2112 ,and check on local sla
[17:51:54] Can\'t you hear word
[17:49:33] Show error log
[17:48:32] Showing errors
[17:48:15] If see parmanent solution share brother hnnnn🙏🙏
[17:47:46] Bro use default loader and check on local sla
[17:45:40] Tecno kg7h da file
[17:45:20] Yes 💯✅
[17:38:18] Do anybody have solution for Easy buy permanent unlock
[16:37:32] It has to be track disconnect if u can\'t see with cpu on then remove fix track and put it back
[16:36:24] The phone come to another shop bro
[15:59:00] please deriver download mode Nokia TA-1043🙏🙏🙏
[14:59:43] Make sure you go to settings and Factory Reset the device.
[14:54:11] i was busy bro. are you still stuck on wallpaper & volume button? report back so that i can post you a fix
[14:46:56] Check if u brick pcb... Put it under microscope and fix it
[13:45:38] Please someone help me to fix this oppo F11 PRO after try to remove password with UFI phone Dead .
Need help urgent🚨🚨🚨🚨
[13:43:29] Flash ZTE blade A3 2020 done with infinity server file
[13:41:22] Nokia c10 network lock ...why is it taking too long ..i placed order since 9h49 now its 15:40 still on \"EXECUTING\"
[13:40:40] Load IDBase v8331 Ok!
Open : SPD_PROG.xml
Reading package ...
Read package finished!
Created by Infinity-Box (c) 2021
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt
Patch Level : PPR1.180610.011
Display ID : GEN_RU_1_A3_2020_V1.3
Ver. Incmt : 20201229.204009
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2020-12-05
Build Time : 29.12.2020
Product Model : ZTE Blade A3 2020RU
Product Brand : ZTE
Product Name : RU_P932F50_1
Produ
[13:28:37] Is the problem
[13:26:16] No software to download
[13:11:23] 😀
[12:39:28] Can I get any answer for this order today
[12:29:15] blockchain-based decentralized VPN and firewall solution
[11:58:37] reset account done
[11:49:20] Thank done but cant change wallpaper & volume button not work
[11:43:32] this username password we cannot logn
[11:43:26] Change Dongle Email
[11:43:18] === DongleManager [Infinity] v1.91 [6/11/2022 4:43:10 PM] ===
Searching...
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 000093547CF94082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Serial No (S/N): D0369354
Firmware version: 0153.02
=> FACTORY DEFAULT Account:
- Username: 00D0369354
- Password: UCDQrihx
[11:39:08] I want to read RPMB file on SM-A013G I can find the collum written RPMB ?
[11:38:57] Hello is there bypass without VPN file for rosemary
[11:32:26] Order number 144902 am waiting since from morning please
[11:31:58] Can i remove itell A16+ code without formartting the content of the phone?
[11:15:51] Please 🙏
[11:09:13] blockchain-based decentralized VPN and firewall solution
[10:55:51] Please check the status dear sir it’s long time
[10:50:04] It\'s on black screan
[10:43:13] ...
[10:29:57] Reconnect battery or hold vol and power for few min
[10:22:27] I wanted to read A032F INFO in diag mode the phone is stuck on black screan SPRD U2S Diag (COM7)?
[10:22:12] Hello
[10:15:34] Not server...
[10:15:19] Needs server unlock
[10:09:34] What to do with Xiaomi redmi 10s relock
[10:09:10] Inb me!
[09:57:36] Text me I see
[09:57:32] File available...but not uploaded on cloud..
[09:48:35] Am not doing network unlock, the phone vibrate only now after flash with the backup file and even the downloaded file
[09:42:25] Solution available +network unlock at once
[09:39:21] Alcatel 5007u
[09:32:42] Found 1 file X-tigi v18 pro
1. X_Tigi_MT6580_VSUN_X_TIGI_V18_Pro_8.1.0_PRO_V04_O11019
[09:31:14] In this infinity support site could not find the downloading path and I log in infinity best Nokia tool.
[09:28:44] Device status?
[09:25:02] Try this & let me know if not working
Enabler ADB Frp or ADB Enabler must be Downloaded First
Step by step
1👉Open Enabler ADB FRP
2👉Go to Emergency call
3👉Dial *#0*#
4👉Always allow USB debugging pop-up ADB option
Booom Frp Done don\'t worry if phone locks
Make a hard reset
Open tool again
Emergency call
×#0*#
When adb pop ups from your phone remove cable close this setup and use minimal adb and fastboot
Then write the following
👇
adb shell
👇
pm disable-user --user 0
👇
com.and
[09:24:04] Model?
[09:20:08] I wanted to read A032F INFO in diag mode the phone is stuck in SPRD U2S Diag (com7)
[09:19:08] how to active select nokiaQLM[ED] best2??
[09:18:33] blockchain-based decentralized VPN and firewall solution
[09:09:42] Did infinity service support Microsoft lumia 640LTE RM-1074 network unlock asking for code
[09:07:26] True need to leave cm2 now
[09:05:52] What cm2 thinking about OPPO A53 CPH2127 ? Infinity team can tell us true about Qualcomm software 5 years gone without update. (45$ per year and paying credits for unlock is too much) .
[09:04:25] What is the error Cm2 shows
[09:04:08] Even the one which I backup should on the phone
[09:03:55] yes but same issue
[09:03:40] Both is android 10
[09:03:18] Did you backup the file
[09:00:45] what is firmware version with the lock?
what is firmware version without lock?
[08:58:39] Text me for dead boot flash
[08:57:56] yes bro mine its spd it just format failing to receive firmware its completely dead tecno spark 8c kg5k
[08:56:33] On tecno and infinix phones
[08:56:06] We do use it to remove easybuy lock on mtk and spreadtrum on CM2mtk and Cm2sp2 , and it do work with such method well
[08:54:57] Please check #CM2MT2 boot issues info https://infinity-box.com/?r=100189
[08:54:22] Anyway for serious cases I suggest to use support forum and treate there separate threads with full info and sw log text
[08:53:40] what is this interesting method are you using boys?
read flash image out and write it back.
What\'s the meaning of this method?
[08:53:33] what is this interesting method are you using boys?
read flash image out and write it back.
What\'s the meaning of this method?
[08:52:36] Post sw log text to support forum https://infinity-box.com/?r=8
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[08:52:14] Post sw log text to support forum https://infinity-box.com/?r=8
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[08:52:04] no it had mdm lock
[08:51:32] Found 5 files KE6J
1. Tecno_KE6j_H6215GH_Q_GL_210311V259
2. Tecno_KE6j_H6215G_Q_TR_200726V34
3. Tecno_KE6j_H6215GH_Q_GL_210728V275
4. Tecno_KE6j_H6215GH_Q_GL_211012V277
5.
[08:51:03] stuck at boot logo before flash?
[08:50:37] Perfect! You are King!
[08:50:11] tecno kg5k spark 8c spd i was trying to format flash but it just format failing to flash stuck at prepare target........this is VER : BP_R2.0.1
LEN : 1990F997C ( 6.39 GiB )
CPU : KG5k
VER : KG5k-F062-11.0-GL-V038-20220322_1556
Open : [KENTECH]KG5k-F062-11.0-GL-V038-20220322.pac
VER : BP_R2.0.1
LEN : 6.39 GiB
CPU : KG5k
VER : KG5k-F062-11.0-GL-V038-20220322_1556
Reading package ...
Read package finished!
Product Brand : TECNO
Product Device : TECNO-KG5k
Product Model : TECNO KG5k
Product Name : KG5k
[08:50:01] https://infinity-box.com/support/
[08:48:52] Solve 😍
[08:44:02] Help me
[08:40:36] Please solution needed ?
[08:40:18] techno spark KE6J mt6575 scatter file please
[08:36:55] What is the model name?
[08:36:14] send imei here
[08:35:45] send e-mail
[08:34:52] Admin reset lock , I back the firmware up from the phone and flash it back on the phone , it come up but after I flash and format with same file it vibrate only, even after downloading file from online , it still vibrate only
[08:32:13] thanks anyway but some Nokia devices have no file manager. i mean is it possible to write via CM2.
[08:32:05] UnlockTool Official, [6/11/2022 1:30 PM]
UnlockTool_2022.06.11.0 Released Update Auto.
OPPO(format, wipe keep data, erase frp)
- Oppo A53 (2020)CPH2127 tested
- Oppo A74 (2021)CPH2219 tested
- Oppo F19 (2021)CPH2219-F19 tested
- Oppo F19s (2021)CPH2223
- Oppo F17 (2020)CPH2095
- Oppo A33 (2020)CPH2137
- Oppo A32 (2020)PDVM00
- Oppo A73 (2020)CPH2099
- Oppo Reno6 Lite (2022)CPH2365
- Realme 7i (2020)RMX2103
HUAWEI(format, erase frp,read/write firmware)
-Huawei Nova 8i NEN-L22 | NEN-LX1
More Info : -
https
[08:31:27] if you have any issues with orders you can contact to support via e-mail https://infinity-box.com/contact/
you must send text but not selfies
[08:31:00] Use engine
[08:30:51] 停止e4
[08:30:17] Diag mode not working
[08:29:38] first copy to PC, after that from PC to other phone
100% works
[08:28:30] Sign In here https://infinity-box.com/support/
[08:28:00] no idea
[08:26:29] Whats the boot key?
[08:25:27] what was before flash?
[08:25:22] I got SM-A032F in hands need to remove FRP?
[08:25:10] you can try any new SPD model with CM2SP2.exe IDENTIFY button.
post sw log text
[08:23:28] Team can you please work on Samsung devices which use spreadtrum CPU e.g Samsung SM-A032F FRP remove or activate memory tools test points if possible?
[08:16:43] Did anyone know how to fix Alcatel 5007u only vibrate only after flash and format with cm2
[08:02:21] Why are you unable to download
[08:02:10] 停止{k
[08:01:59] Thank u bro I\'m unable to download this and pls send me a file here.pls
[07:30:13] Found 2 files l5503l
1. iTel_L5503L_F6301_9.0_OP_V050_20210621
2. iTel_L5503L_F6301_9.0_OP_V045_20200930
[07:12:11] Found 4 files Nokia TA 1174
1. recent_Nokia_nokia_ta_1174_spd_file
2. recent_M118_61D_PCB01_gprs_MT6261_S00.M118_IJ_191221_V01_copy_Nokia_TA_1174
3. noname_copy_M915F_7_PCB01_gsm_MT6260_S00.M915F_7_V1_copy_Nokia_TA_1174
4. noname_cop
[07:03:29] ???
[06:53:33] hello guys how can i copy all the contents fro Xiaomi no Noki
like ta-1174
[06:51:02] I submitted c20 yesterday they took 5 credits.
woke up today i connected the phone again they took but 5 credits.
1 imei another is completed another is running.
c20 cost me 10 credits.
can you send the 5 credits back?
[06:30:37] Avatar Auth Tools is professional software for any Qualcomm And Xiaomi Devices
You can firmware customize when doing Flash ,Xiaomi Fastboot To EDL 1 Click,Xiaomi FRP Reset 1 Click,
EFS Reset Backup and Restore
Easily
Tools Future :
⚡️Readinfo ( Mi Assistant Mode ) FREE
⚡️Qualcomm Generic & NON Auth Phone Flash FREE
⚡️Fastboot to EDL 1 Credit
⚡️Reset Frp ( Mi Assient Mode ) 1 Credit
⚡️Xiaomi Authorization Flash 4 Credit
⚡️Reset Frp EDL Mode 4 Credit
⚡️Factory Reset From EDL 4 Cr
[06:13:59] Sending DA fail
[06:13:32] Unable to find infinity site this firmware
[06:12:40] Nokia TA 1174 NEED firmware pls
[05:55:12] Help this mobile since yesterday still not accepted
[05:54:25] Admin.
[05:54:19] 😒
[05:54:13] Help this mobile since yesterday still not accepted
[05:53:52] Contact ur reseller
[05:52:43] Send your Infinity Username to seller https://infinity-box.com/buy/\r
\r
How to know Username https://infinity-box.com/service/
[05:52:43] How do I buy credit?
[05:16:15] Yes with credit
[03:30:59] Can infinity BEST unlock this phone network?
[01:40:09] hello any solution ?
[01:39:59] https://forum.gsmhosting.com/vbb/f1009/oppo-reno4-z-5g-cph2065-unlock-network-2993797/#post14567274
InfinityBoxTalks 2022-06-10
[23:34:35] Imei null huawei y7 prime 2018 solution
[21:55:52] I also used this method on A3,CORE
(1) I DISABLED KG WITH CM2MT2
(2) HARD RESET BECAUSE FIRST BOOT AFTER KG DISABLE WILL STUCK ON BOOT LOOP
(3) UNLOCK BOOTLOADER
(4) WRITE NEW SCATTER FIRMWARE WITH SAME BINARY
(5) HARD RESET DONE 💯
I think it\'s a good idea to make a backup of the device before doing these process if something goes wrong you can still restore the device to it\'s previous state.
[21:54:43] Enabler ADB Frp or ADB Enabler must be Downloaded First
Step by step
1👉Open Enabler ADB FRP
2👉Go to Emergency call
3👉Dial *#0*#
4👉Always allow USB debugging pop-up ADB option
Booom Frp Done don\'t worry if phone locks
Make a hard reset
Open tool again
Emergency call
×#0*#
When adb pop ups from your phone remove cable close this setup and use minimal adb and fastboot
Then write the following
👇
adb shell
👇
pm disable-user --user 0
👇
com.android.systemui
Boom 💥
Try this Bro.
[21:34:57] Perfect!
You can post your info and attach files here https://infinity-box.com/?r=8
[21:33:50] Needs to run adb scripts after kg unlock
[21:33:19] Write here your method
[21:32:53] It can be removed without relocking but not parmanent.
[21:30:21] Can
[21:29:26] And?
[21:27:58] Available
[21:21:16] I can see that the CPU is SPD ,you don\'t connect your system to WiFi since you don\'t connect your system no way you can identify it
[21:19:21] Don\'t you read what you see on your dashboard?
[21:17:28] Mi Account info https://forum.infinity-box.com/viewtopic.php?t=3947
[21:17:12] https://infinity-box.com/?b=26#26
[21:16:22] What\'s the CPU of the phone?
[21:16:15] support redmi note 10 5g lite mi account remove?
[21:16:14] Yes solution available
[21:15:48] Post sw log text to support forum https://infinity-box.com/?r=8
How to get sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[21:15:23] no model selection there, no boot info, nothing
if you want to send selfies use instagram
bad luck for me your selfies are useless
[21:14:11] I will do that tomorrow
[21:14:00] Ok
[21:13:51] bro, I have no time to browse thousand of posts here
select right model and give me text
[21:13:19] This
[21:13:11] This
[21:12:55] what picture?
[21:12:45] I sent the log picture
[21:12:19] pls explain
[21:12:16] That\'s it
[21:12:06] Dad tit