Infinity CM2, Infinity [BEST] @InfinityBoxTalks 28-Mar-2024 [page 46]

[page-1] [page-2] [page-3] [page-4] [page-5] [page-6] [page-7] [page-8] [page-9] [page-10] [page-11] [page-12] [page-13] [page-14] [page-15] [page-16] [page-17] [page-18] [page-19] [page-20] [page-21] [page-22] [page-23] [page-24] [page-25] [page-26] [page-27] [page-28] [page-29] [page-30] [page-31] [page-32] [page-33] [page-34] [page-35] [page-36] [page-37] [page-38] [page-39] [page-40] [page-41] [page-42] [page-43] [page-44] [page-45] [page-46] [page-47] [page-48] [page-49] [page-50] [page-51] [page-52] [page-53] [page-54]

InfinityBoxTalks 2022-02-20

[08:42:02] Reflash device with another firmware version
[08:41:52] What is the text at phone LCD after power on with sim card?
[08:40:07] Make this https://infinity-box.com/?r=100155
[08:36:35] How can i fix my cm2sp2 not opening
[08:12:17] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : T920D
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

D
[08:12:11] TECNO T920D unlock done but still locked after insert simcard
[08:08:28] This mean on your PC installed some share USB program. If you sure there is no any and sw still not run, most probably your pc is infected by virus.
[08:07:13] Try untick firefly in menu and repeat. What a result?
[08:06:59] ok
[08:06:26] Check hardware.
[08:05:45] 🔗 Your Personal Referral Link:
https://t.me/Earn_Free_Cash_Bot?start=r01481819483 👈
Share this referral link to your friends to get more coins.

For each people using that link you will get 50 coins 😎
[08:01:56] Select local LSA
[08:00:43] stuck on nokia logo
[07:17:16] 95468
[06:58:04] I have two cm2, and I gave one to my boy in another country,

Using my here, so could that mean sharing or what
[06:54:27] No I am using it myself, never share with anyone.


Or what does this sharing mean?
[06:46:38] I Want To update My iOS on infinity support area
[06:45:09] Sharing, seems like
[06:44:58] Device state now?
[06:19:43] Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can\'t switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 120 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : D2AEC02D635E3FB11A4C39CE910B34EA
BROM Protoc
[06:19:42] nokia rm-1187 flashing problem
[06:12:09] S/n DDB11A94
[06:10:25] Please admin, both mtk2 and spd2 is not open again what is the problem
[04:56:20] Yes now okay thanks ☺️

InfinityBoxTalks 2022-02-19

[23:21:55] HELLO. Help to bypass password nokia ta-1322 with best bb5 please?
[23:20:25] Did you solve?
[23:09:08] No
[22:51:05] Model: iPhone 13 Pro Max 128GB GOLD
IMEI:353967811416588
IMEI2:353967811445926
Serial:FC21V3V2NW
Purchase Date:2022-01-07
SimLock: Locked
Carrier: US AT&T/Cricket Locked Policy
[22:14:13] there are three millions of tecno files at Infinity support server
you must enter model name
[22:08:45] Found 40 files tecno, search limit is 20 files per server
1. recent_MT6768_TECNO_MOBILE_LIMITED_TECNO_LD7_10_LD7_H694NOPQRSVZ_Q_OP_211015V377_QP1A.190711.020_ld7_h694
2. Tecno_N5S_QL610_L_KE_SAFARICOM_20151018_multiDownload
3. Tecno_S1SPro_H8016C1_M_KESF_170330V50
4. [21:16:34] Go to platform and show ur selection
[21:14:32] Realmi c11 2021 model rmx 3231 backup nvram not working.flash support not working
[21:13:58] Oready return phone ....phone is kg7h tecno avnt b read by cm2
[20:51:46] You can not bypass it like that bro
[20:47:34] once you understand the process you know what to do
[20:47:25] but actually I don\'t think video helps
[20:47:12] Now you can make a video if you want :)
[20:46:47] Alright
[20:45:15] after that use lines below
[20:45:04] so first check locked country (if you do not know it)
[20:44:33] Yeah you are right
[20:42:06] This phone need server connection.

Enter good working password, the same as for your Infinity web account.

How to enter password https://www.youtube.com/watch?v=KogYDEkg-O8

Get username and reset password here https://infinity-box.com/?r=22
[20:40:37] even five lines
[20:40:22] look at first 4 lines friend
do you undersgand the meaning of that lines?
[20:39:27] Sure I do am going through it as we chat now
[20:38:58] do you see list of products there now?
[20:37:25] I have only infinity drivers Installed 🤧
[20:36:58] Yes I do
[20:36:49] click to it friend
[20:36:37] Do you see [Xiaomi] line there? At middle
[20:35:46] ?
[20:35:38] Found 5 files tecno ch7
1. Tecno_CH7n_H812DE_R_OP_211112V931
2. Tecno_MT6572_TECNO_TECNO_P5_ratech72_wet_rlk_jb3_4.2.2_P5_G255_20140313
3. Tecno_CH7n_H812D_R_TR_211112V933
4. Tecno_CH7n_H812D_R_RU_211112V932
5. [20:34:47] paste here screenshot of your screen
[20:34:24] No
And read group name
[20:34:18] Done
[20:33:44] click to Products meny dear
tell me when done
[20:33:28] it\'s your PC issue, be sure you installed drivers well
disabe all fake antivirus tools
delete all sharing tools and other useless tools and drivers
[20:31:53] Учи английский, а до тех пор пиши хотя-бы через гугль переводчик, иначе получишь бан
[20:31:23] Am in have login to my iOS account
[20:30:40] I have Installed but the issue didn\'t solve
[20:30:24] send e-mail to SUPPORT but not to sales!
https://infinity-box.com/contact/
[20:29:30] inbox is little bit forbidden here
if you know how to fix write here for everybody
[20:28:42] I will teach you my friend, right here right now
login you your infinity account now
[20:28:06] Hi,
reboot PC
after that run Donglemanager and reed Dongle S/N
In case of any problem copy/paste DongleManager text here
[20:27:42] Yes bro how to do that
[20:26:51] Hello,
Make this https://infinity-box.com/?r=100155
[20:26:18] copy/paste complete text
[20:25:45] what tutorial friend? How to solve mi-account via server or what?
[20:25:15] use 7-zip.org and unpack archive to folder at your PC
then click twice to DongleManager.exe file
[20:24:49] I think a tutorial video will be done in reference to this bro
[20:24:26] Friend, I see nothing at your selfie
install https://desktop.telegram.org and copy text here
[20:23:48] be sure you have latest mtk drivers installed, see qcommtk installer at support area
[20:23:29] be sure you have latest mtk drivers installed, see qcommtk installer at support area
[20:23:23] be sure you have latest mtk drivers installed, see qcommtk installer at support area
[20:22:23] https://t.me/InfinityBoxTalks/65127
[20:22:12] https://t.me/InfinityBoxTalks/65127
[20:21:59] https://t.me/InfinityBoxTalks/65127
[20:20:46] Try to select another base/model/loader
[20:19:15]
[20:19:02] also you can use pac file as loader
[20:18:43] What operation do you want to do?
[20:17:50] OK
[20:17:36] select another base/model/loader
[20:16:52] do not forget to select correct country]
if you will enter wrong country your fund will be lost and device will be still locked
[20:16:07] You can Download all Infinity files here https://infinity-box.com/support/
[20:15:44] Admin we will buy credit to unlock permanently
[20:15:30] send e-mail to support but not to your seller
[20:14:32] sir, do you ask sales department to reset your password?
Do you think it was good idea?

Please see here where to send e-mail https://infinity-box.com/contact/
[20:12:57] Is it Ok now?
[20:12:26] post software log text
[20:11:38] really permanently solution is via server/credits.
all other methods may got relocked back accidentally
[20:00:37] Still the same issueok
[20:00:23] EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0001
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: CID : 150100515836334142001472F476184D
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 515836334142 : PRV : 0x00
EMMC: VEN : SAMSUNG : QX63AB
EMMC: SNN : 3430
[20:00:23] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM18)
MODE : BOOTROM
PORT : 18
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : F710C8741E2FAFDC894FF77815187FE4
BROM : SecLevel : 0x000000E
[19:59:03] Permanently even if it will be with credit
[19:57:55] Mi Account Permanently or Temporary https://forum.infinity-box.com/viewtopic.php?t=3947
[19:57:36] Ok
[19:57:30] log text?
[19:57:10] Solution: try available loaders one by one and post here software log text
[19:56:17] install https://desktop.telegram.org and copy here software log text
[19:50:20] 🙏 work on mi account
[19:48:57] QC update please 🥺
[19:46:57] It\'s already done, only after the removal it took me a while to open and I had to manually reset it to open it.
tomorrow I will insert the card to test because the card drawer is in the establishment.
[19:46:53] I have tried it
[19:43:11] Use 7731E
[19:42:03] So the fdl is not working
[19:41:52] The problem is that the phone is locked somehow
[19:41:36] Ok
[19:41:09] Search Google for processor type
[19:40:23] Did u use ISP test point
[19:08:39] هتي
[19:03:54] 😂😂
[18:44:57] An apple can send me a video with three network locks, ie SIM card lock
[18:44:15] Hi, whatever I do, I want to unlock Nokia\'s network, I can not
[18:39:29] yes friend,
use 7-zip.org ans UNPACK software to folder at your PC before run
[18:37:11] 😂🙈
[18:35:13] it means you are not professional :(
You must UNPACK archive to folder before run exe
[18:34:27] Please do not post the same selfies again and again.
Be serious and copy/paste software log text.
And finally make FireFly OFF
[18:14:38] If you can help pls inbox
[18:13:56] 😭😭😭😭😭😭😭😭😭😭😭
[18:13:26] Help
[18:13:08] Itel p36
[18:13:01] It\'s like the phone is on easy buy
[18:07:59] make FireFly OFF
[18:06:30] Error?
[18:06:15] with firefly disabled from DA error sir.
[18:05:16] There is no solution at the moment
[18:03:39] What is your phone model name?
[18:02:21] And for best results install https://desktop.telegram.org and copy text
[18:02:04] Select another model/base/loader
[18:01:31] Make FireFly OFF
[17:48:36] THIS VERSION DOES NOT REMOVE KG BRO.
[17:46:20] Use lower version like 2.29
[17:40:10] What model do you think it\'s best
[17:40:04] Vivo s1 model
[17:39:50] Can i repair demage nv with cm2 without security backup ?
[17:35:34] WHEN I ACTIVE FIREFLY ONLY ACCEPTS TO MAKE READ INFO AND WHEN I DO SMART RESET EXTRA ONLY FORMAT AND NO KG REMOVAL APPEARS.
[17:29:12] any solution
[17:29:01] Card found : 30FD5E9E , v0152
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Open : P681L-F6315-10.0-OP-V027-20210716_2026_user.pac
VER : BP_R1.0.0
LEN : 3.80 GiB
CPU : s9863a1h10
VER : P681L-F6315-10.0-OP-V027-20210716_2026-user

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : P681L
Product Model : itel P681L
Product Name : P681L
Patch Level : QP1A.190711.020
Display ID : P681L-F6315-10.0-OP-V027-20210716
Ver. Incmt :
[17:28:05] Select another model/base/loader
[17:27:19] I mean in some cases you should wait for a long time and phone finally power on
[17:26:54] Your Infinity has no time limits. You can access account anytime, with expired support or with active support.
After support expired you can use your installed software unlimited.
To use latest updates you need renewed support.
You can renew support anytime or even do not renew it if you prefer to use previous software versions
[17:21:14] Can\'t get you bro
[17:17:44] Found 6 files pr651H
1. Tecno_PR651H_F6317_11.0_OP_V046_20210827
2. Tecno_PR651H_F6317_11.0_OP_V032_20210602
3. Tecno_PR651H_F6317_11.0_OP_V052_20211025
4. DA_SPD_USC_Tecno_Tecno_Spark_7_PR651H_FDL.fg
5. [17:17:24] And for best results install https://desktop.telegram.org and copy text
[17:17:18] Make FireFly Off https://forum.infinity-box.com/viewtopic.php?t=3948
[17:16:58] And for best results install https://desktop.telegram.org and copy text
[17:16:32] Make FireFly Off https://forum.infinity-box.com/viewtopic.php?t=3948
[17:13:05] In some cases t may takes a lot of time for first start
[17:12:31] There is no cg6 nvram file at support server yet. You can try google or other servers.

If you will get file pls upload this way https://infinity-box.com/?r=100020
[17:02:47] Thanks I saw octopluse support the unlocking I will try it thanks
[17:00:37] I need nv bukpu
Tecno camon 17 cg6
[17:00:16] Hi
[16:47:15] OKEY SIR
[16:46:09] Same problem if you get successfully bro tell mi
[16:43:08] I want to remove KG.
[16:42:15] what do i do to solve these problems?
, someone help me here?
[16:27:01] hello! how to remove kg on samsung a02 by cm2mt2?
[15:47:01] Tecno pr651H frp reset pac?
[15:14:17] Hi I need to know

I did register my infinity cm2 dongle last year on 03-Mar-2021 and is going to expire on 04-Mar-2022

Do I need credit on my infinity cm2 dongle when is not yet expired?????
[14:57:45] Let me try
[14:57:41] Ok
[14:57:13] if you download the firmware, open the Infinity module, flash section, put the firmware, we go to the Infinity spd installation directory and in the boot folder, itel folder you have the custom loader
[14:55:48] Not frp bro
[14:54:34] Password: no size: 5MB
[14:54:26] But no success
[14:54:23] And flash it
[14:54:15] Am trying to backup the ROM
[14:53:51] Not frp bro
[14:53:39] itel p36 w6501 frp reset pac file
[14:53:32] Found 3 files itel p36
1. iTel_P36_W6501_F3111_9.0_OP_V020_20200429
2. iTel_P36_Play_L6005_SP9863A_9_L6005_F6308RU_9.0_RU_V018_20200728_PPR1.180610.011_V018_Vision1
3. Oukitel_NVM_oukitel_k6000pro_MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V79_P36_1_lwg_n_eMMC

Make your search here @FlashFileSearchBot
[14:53:28] here
[14:52:58] https://drive.google.com/file/d/1TgKgeVw1kB8hButV-hjgcTo4345kTWzr4m/view
[14:35:55] Pls help
[14:34:54] But no success
[14:34:50] And also tried backup
[14:34:42] But it\'s not working
[14:34:37] Am trying to flash file inside with cm2
[14:34:26] Pls guys I need itel p36 custom loader
[14:25:05] Sir plz give me reply
[14:02:42] DONE
[14:02:15] brand and model
[14:00:26] security section
[13:57:51] dongle manager setting need
[13:55:24] But still not solved
[13:55:07] I did it bro
[13:50:19] UK with large caracter
[13:48:43] Save it in infinity box spd c drive
[13:38:40] Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[13:35:07] Why show this error?? anyone know?
[13:34:37] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Realme : RMX3231
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FD
[12:56:55] Card found : 55793999 , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v1121431 Ok!

UserName and/or Password not set! Can\'t continue!

Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.33 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : USB Serial Device (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip AC
[12:32:53] Please can you help me out answering my question???
[12:26:22] Oppp R15. where is the testpoint?
[12:02:14] Again and again this issue comes when ever i read or flash or reset frp etc
[11:59:29] How to solve this
[11:59:14] Again same issue when reset fro or anything else the pc restarts
[11:56:07] Elloooo
[11:47:08] urgent
[11:46:57] tested ok
[11:46:20] redmi 9 dead boot file
[11:44:59] Kg7h
[11:44:47] Lg7h
[11:42:17] Not ready it
[11:40:25] why dongle manager not open?
[11:12:11] [FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
Write : MD1IMG
FAIL : SEC : INSUFFICIENT BUFFER
ERR : 0xC002004B
ERR : SEC : INSUFFICIENT BUFFER
ERR : 0x0362BE50|0x0362BE50

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!
[10:45:27] Please help me my infinity box dongle are not open
[10:44:56] hello sir how to connect brom lg q60?
[10:32:41] Help meeeeeeeee🙈
[10:17:07] Turn off Usb 3.0 or your hard disk had problems
[10:13:10] Please
[10:08:17] Some help
[10:08:12] My cm2 v2.33 says smart card not found
My dongle doesnt update
Says the same
[10:07:27] I need some help
[10:07:21] Hello
[09:55:21] use z3x or octoplus or chimeratool
[09:53:52] please inbox your problem
[09:49:18] I flash it with cm2 n the ROM I download from the site, still the same thing
[09:48:48] Try it out,is not working at all bro
[09:44:03] Now you have to flash complete.
[09:43:22] That\'s was the mistake I made sha
[09:42:03] Don’t try wipe+frp on nokia phone the software will crash.
Use smart reset . Is working
[09:40:39] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM35)
MODE : BOOTROM
PORT : 35
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 89B636B8BFBC116433962C9848225E40
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|
[09:38:37] ERR : UltraFlash Failed!

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!
[09:04:17] narsa\\
[09:04:14] ikkalasi biita
[09:04:07] man 100 ming toliman
[09:04:01] baribir
[09:03:59] berolmiydi
[09:03:57] 300 mg
[09:03:53] xa yaxshi ekan
[09:02:22] Can SAMKEY unlock this device
[09:01:39] Support boot Tecno android 11 nit included especially Tecno ch7
[08:58:16] uninstall ultima/flexihub and other usb sharing tools before do that
[08:56:57] Good day sir, please infinix X693 locked to administrative mode, how do I unlock it please
[08:55:03] Okay
[08:49:04] Contact to any seller https://infinity-box.com/buy/
And order Dongle|Account unblock processing fee in case of network|remote|usb sharing
See https://infinity-box.com/price/ line 12.
Send your dongle S/N to seller
[08:19:02] How do I make payment to unblock the dongle sir
[08:04:12] Is the phone mtk?
[07:00:13] how to lock screen redmi note9 by cm2??
[06:58:26] You mean kurdish?
[06:56:36] u need filled account and password in settings and payed account
[06:49:53] Frp?
[06:25:46] Hi I need to know

I did register my infinity cm2 dongle last year on 03-Mar-2021 and is going to expire on 04-Mar-2022

Do I need credit on my infinity cm2 dongle when is not yet expired?????
[06:14:11] it\'s not mtk2 alone that has the problem
[06:12:47] Yesterday
[06:12:26] Already
[06:12:05] Try to repair again your OS
[06:11:09] Yes
[06:10:58] Did you install mt2 21a boot pack?
[06:09:20] Red info not work, smart reset not work
But frp option only work
[06:08:09] hello my problem is not solved. I just reinstalled my PC. but the problem still persists. I have difficulty performing operations with my dongle since the morning it is only FRP that works the other operations do not work
[05:40:25] nokia 1 plus is mtk phone
[05:32:15] How beo
[03:13:05] Seriously ?
[02:50:59] CM2 team is nice listening to all this blabbing, if you dare try it with Z3X! I think and believe they will also crash your system along with the dongle
[01:18:33] CM2 team is nice listing to all this blabbing, if you there try it with Z3X! I think they will also crash your system along with the dongle
[01:13:27] Send your IOS Username to seller https://infinity-box.com/buy/\r
\r
How to know Username https://infinity-box.com/service/
[01:13:27] Kernel pro usb over ethernet ,
This tool crack or trail reset tool need urgent

Important ;- Only kernel pro usb over ethernet tool
[01:12:23] This customer needs to be disciplined

InfinityBoxTalks 2022-02-18

[23:33:39] What are you trying to do
[23:33:23] Please can someone help me out with Nokia ta-1270 nv 🥺
[23:22:46] Infinity team help me
[23:01:25] Help me
[23:00:39] It said invalide Pointer operation
[22:59:32] hello my problem is not solved. I just reinstalled my PC. but the problem still persists. I have difficulty performing operations with my dongle since the morning it is only FRP that works the other operations do not work
[22:46:32] Brotherly u see, I installed this driver because I thought it would help fix my dongle I never thought it will amount to this, I even reinstalled windows still installed this driver back, I don\'t even know is the one causing this problem to my dongle
[22:41:00] My friend, I must confess to you that no dongle or boxes support USB sharing, non of them. Because we that we here still have other dongles and boxes, it\'s already warned by them. Non of them allowed that.
[22:37:30] But it not like I intentionally did it on pupose sir, I bought this tools with my hard earned money why would share it with third parties
[22:37:25] https://infinity-box.com/?r=100174
[22:35:53] You are dealing with team not one man business, why not obeyed and followed this instructions on first place. This is company, they have already wrote on their web site, the results of your offense. Stopped begging, do the needful things to serve as a punishment of your ignorance.
[22:31:19] I told you - I understand your situation but there is no chance to fix usb sharing attempt for the 3rd time.

please scroll up this group chat, you wil see other people who got the same result as you after repeated usb sharing.
[22:30:04] First order it for your Username 0061B2CF7A
you het HCU account activated
then login to HCU site and enable HCU
[22:29:27] I understand sir, please pardon my ignorance and stupidity
[22:29:04] for HCU see this https://infinity-box.com/price/
line number 43. DC-Unlocker and HCU-Client 99 credits (unlimited HCU activation for Infinity)
[22:26:59] I need activation hcu on infinity box can sir
[22:26:12] Can ask 2
[22:25:59] OK sir thank you
[22:24:43] your box already has CM2 but it\'s support is expired.
You need to order CM2 support renew for 1 year or 2 years
[22:22:12] OK sir I andrstad new box only need renew not activation cm2
[22:21:13] You can contact to any seller anytime later
[22:20:40] We don\'t need your money
We want to protect our legal users who work hard in their workshops.

People must take responsibility for their words (you told that you uninstalled usb sharing) and for their actions.
Please take warning about ubs sharing serious next time but not like \"ha-ha, stupid supporter told me to uninstall flexihub\"
[22:19:51] https://forum.gsmhosting.com/vbb/f296/resellers-infinity-products-infinity-credits-stock-1976320/index4.html#post14520137
[22:19:41] Now type on mobile mabe tomorow
[22:19:08] OK pr but I send new on mobile
[22:18:26] I have learnt my lesson now, please you can still help me
[22:18:25] yes
[22:18:20] After renew work cm2 work last update
[22:17:17] you can renew support for this box and after that you will be able to use latest CM2 software
[22:16:28] Type: Infinity-Box/Dongle [CM2]
S/N: 61B2CF7A
Username: 0061B2CF7A
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0134; Expired: 14-Oct-2010
#2: Infinity Language Pack Editor; Firmware Version: 0118
#3: Infinity [BEST]; Firmware Version: 0123; Expired: 01-Jul-2020

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infini
[22:16:23] USB sharing is forbidden https://infinity-box.com/legal/eula/
[22:15:38] Please sir, I don\'t have enough cash for the unblocking, plz help me out
[22:15:29] 61B2CF7A
[22:13:44] How to know S/N https://infinity-box.com/support/?s=6
[22:13:23] What is the Serial Number?
[22:13:10] Ok
[22:13:03] What is the S/N?
[22:12:26] I have box infinity before work mtk and spd program but now stop updat 2009 last updat I don\'t know if the device has cm2 activated. or not
[22:12:17] Any problem?
[22:10:14] Hi sir can help me plz
[22:08:23] Also you can post your contacts and web site here https://forum.gsmhosting.com/vbb/f296/resellers-infinity-products-infinity-credits-stock-1976320/
[22:07:55] good, you can send e-mail to help@infinity-box.com
[22:07:24] It will be 3rd chance but not 2nd and it\'s impossible friend.
I want to give you 3rd chance it but I can not.

Our patience is over.
Many old and loyal users called us last days and says that we must make something against people who kill business with usb sharing.
We must help to users who work hard at their workshops.

So let\'s other people see that team take this situation very seriously now.
[22:07:20] Reseller am in south africa 🇿🇦
[22:00:51] Please sir give me a second chance, I never never shared any of my dongles with any other third part, plz help me
[21:56:36] Yes, sure,team will will fix your dongle after your repeated usb sharing eltima flexihub usage.
See procedure here https://infinity-box.com/?r=100174
[21:55:11] Thank you for info.
you can share other tools if you want but I guess all your other dongles will be also blocked soon due to usb sharing
[21:54:17] You got clear instruction - disable usb sharing but you continue t use eltima flexihub - tool for usb sharing.
You prefer to ignore ur advice and you continue to use usb sharing tools.

We warn users during last several years not to use usb sharing, now patience is over.

Unblock after REPEATED usb sharing (your case) usage no more free.
[21:54:13] I never intended to post for advertisement sir, just to let u know I never took your instructions for granted sir
[21:51:23] other products advertizing is not allowed here.
If you want to use flexihub for other products sharing it\'s your choice.
You was warned not to use usb sharing with Infinity.
post with other products advertizing was deleted
[21:18:49] Please sir you can still do something for me
[21:11:45] Exactly sir, you told me to uninstall them, no doubt sir but I reinstalled windows, the problem is from the drivers i installed after reinstalling windows
[21:07:04] No that not true,
[21:05:06] Ok, but is it proper? And hope it\'s not against infinity terms and service?
[21:03:36] Please read here how to share Infinity dongle via network https://infinity-box.com/?r=100174
[21:01:27] Why will you need to share your dongle service perhaps he rent it out that\'s what some technicians do now
[20:57:23] Quite interesting but not true story.

You got dongle blocked with sharing tool with name eltima flexihub
c:\\program files\\eltima software\\virtual serial port driver 10\\vspdpro_service.exe

We asked you to uninstall it.
You ignored our request.

Read my previous message, instruction is there
[20:52:48] No sir, I did reinstalled windows, something happened to me last week, when my eft dongle had issues with activation, someone actually recommended serial port drivers for me to use, so after I reinstalled windows i installed this particular drivers, not knowing it actually the problem sir
[20:46:58] you can check this group history, day ago it was situation like yours.
We are tired to repair dongles damaged with usb sharing.
To prevent this kind of activity unblock after sharing now paid.

What you can do now:
Read this https://infinity-box.com/?r=100174
After that you have two options:
1. see https://infinity-box.com/price/ line 12 and pay for unblock
OR
2. buy new dongle
[20:43:06] perfect.
And how it was happened that right after win reinstall you have FLEXIHUB running?
Actually I don\'t need the answer, I know it.
You did not reinstalled windows and did nt tried to delete flexihub.
you just told me \"done\" and say \"hah-ha. stupid support, I will continue\"
[20:42:20] Hahahaah
[20:40:40] Yes
[20:39:14] Yes bro I do
[20:36:14] You got link
[20:35:54] Permanently bro, I want it removed permanently
[20:34:43] Mi Account Permanently or Temporary https://forum.infinity-box.com/viewtopic.php?t=3947
[20:31:03] this software blocked your dongle
c:\\program files\\eltima software\\virtual serial port driver 10\\vspdpro_service.exe
[20:30:40] As you remember support asked you to remove usb sharing tools.
You told you rinstall windows. Right?
[20:18:50] Can CM2 remove Xiaomi MI account for and Redmi note 10 pro sweetie, Redmi note 9 pro and Xiaomi note 11 lite.
[20:17:06] ESTIMATED price - https://infinity-box.com/price/
Please contact to any seller for details - https://infinity-box.com/buy/
[20:15:53] cm2 best dongle mtk in the world❤️❤️❤️❤️❤️❤️❤️❤️
[20:13:40] Active cm2 1years how much?
[19:33:52] What is the phone model name?
[19:33:31] Mobicel switch file is not found at support server. You can try google or other servers.

If you will get file pls upload this way https://infinity-box.com/?r=100020
[19:28:34] Infinity
Infinity #CM2 [BEST] repair tool
https://Infinity-box.com

Group rules https://Infinity-box.com/?r=100172
https://t.me/InfinityBoxTalks
[19:08:12] Mobicel switch firmware
[19:02:27] Use cm mt2
[19:02:20] When i plug phone while reset frp etc this issue comes🤧
[18:59:40] Which driver? I think It is UNI soc driver right?
[18:58:53] Please explain
[18:58:20] What is the model name?
[18:57:50] select another model/base/loader
[18:55:12] Unisoc? Or only Soc
[18:41:27] Okay
[18:40:36] Another way for you. But I suggest you to find fault.bin file for best results.

1. Download and run Sysinternals Process Explorer - https://download.sysinternals.com/files/ProcessExplorer.zip
2. Run procexp64.exe
3. go to menu File -> Save
4. Save file
5. Copy/paste file content here
[18:37:34] https://infinity-box.com/?r=100176
[18:35:59] I suggest you take it seriously and check other folders at your PC.
If you deleted that file already - restore it from Recycle Bin
[18:28:36] 👍 ok sir thank u for help iam wating
[18:27:57] you can send it here
[18:27:44] Friday 9pm my friend
[18:27:33] How do I send the faulty bin file, please sir u should understand that I don\'t really know what is happening, I am a novice when it comes to cm2, it has been long I purchased this dongle. I am not saying that you re wrong but at this point I was not able to use the dongle after the update that why i thought it has not been fixed.
[18:27:19] 9 pm
[18:26:44] What time is it now in your city?
[18:24:51] 2 hours ago
[18:22:25] When your e-mail was sent?
[18:20:46] Do you have lcd fix flash file
[18:19:20] yes I all ready send but no repaly
[18:18:57] is it clear info or do you need detailed explanation?
[18:18:38] https://t.me/InfinityBoxTalks/64854
[18:18:17] ok, good
[18:18:01] I want to change my e.mail becuase I forget it
[18:14:13] you are replying to image that has complete info.
Tell me what is not clear for you there?
I will update web page as per your suggestion
[18:13:03] What is the problem?
[18:12:21] Friend, are you joking or just lazy to read text?
[18:11:45] I want to access my Infinity Account?
[18:11:37] See here how to reset password nd update e-mail address for Infinity Account https://infinity-box.com/service/
[18:10:54] Cmd adb windows driver
[18:10:50] CM2SP2.exe
[18:10:34] SP7731e
[18:08:05] What is this phone CPU type?
[18:07:45] yes I wan to access my account
[18:07:22] Црфе шы еру зкщидуь цшер вкшмукы,
[18:03:18] you must install latest SoC drivers from Infinity support area
https://infinity-box.com/support/
[18:02:47] Check your PC with free antivirus https://free.drweb.com/download+cureit+free/?lng=en
[18:02:24] Click here https://infinity-box.com/?b=2145#2145
and see what Infinity softtware you should run for your phone
[18:01:18] Do you need licence file via e-mail or do you want to access your Infinity Account?
[18:00:23] Type: Infinity-Box/Dongle [CM2]
S/N: DDB11A94
Username: 00DDB11A94
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0150; Expired: 28-Jul-2021

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period
[17:59:48] get your password once and use it
how to get password https://infinity-box.com/service/

People who will share files from support area here for others, who do not have accesss to Infinity server, will be blocked permanently.
You have your own acount. Use it.
[17:57:30] Read here https://infinity-box.com/service/
[17:56:35] send fault.bin file, it has required information about your PC.

if I am wrong you will get dongle repaired for free 2nd time otherwise you know what is the procedure.
[17:52:40] Hi there I have bb5 best dongle and I have forget my e.mail how change it
[17:52:40] any help
[17:48:35] LAVA BENCO Y30 AF9030 LCD BILINKIG PROBLEM PLS HELP
[17:47:25] shadowy
[17:41:13] Found 2 files RMX3261
1. DA_SPD_USC_Oppo_Realme_Realme_C21Y_RMX3261.fg
2. DA_SPD_USC_Oppo_Realme_Realme_C21Y_RMX3263_RMX3261_RMX3262.fg

Make your search here @FlashFileSearchBot
[17:37:34] Tecno pr651H fdl file🙏
[17:33:28] Please 🙏 help
[17:29:02] Please how I cant drivers
[17:18:52] A032f 11 version frp
[17:06:31] check driver\'s
[17:06:16] I am unable to reset any mobile in new version 🤧
[16:48:18] My pc is affected by virus eufy & ckae all file turned into eufy & ckae how can i solve it
[16:41:42] Any idea
[16:41:31] I need format FS this Nokia ta-1264 but is stacking here😔
[16:12:42] Hi there I have bb5 best dongle and I have forget my e.mail how change it
[16:11:18] Done that same problem
[16:10:10] DDB11A94
[16:04:42] I fail to download in cm2 firmwares cause of lost of password and to many reset request so i lost a access for moment anyone to help?
[15:59:39] Samsung a022f firmware please
[15:58:40] Or firmware
[15:54:27] Anyone to help me samsung a022f nv file
[15:53:26] Anyone to help me samsung a022f nv file
[15:48:10] Itel W6002 plank imei after flashing with CM2
[15:34:28] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : iTel-A509W
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
K
[15:32:16] This thing is getting me crazy, I formatted my pc because of this error and I Don\'t have any usb sharing tools on my pc again, will using a different pc solve the problem
[15:30:06] I AGREE BROTHER THEY ARE THE BEST
[15:29:41] ALL PROBLEM SOLVE BOSS Problem that stopped connection was volume key not working just changed them and press the two together and done with KA7 too
[15:28:36] the best Team EVER!
[15:28:18] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : iTel-A509W
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; E
[15:27:04] What is the error with it exactly?
[15:23:39] t looks like this model is not supported yet for safe reset.
Not all models are supported for safe reset yet.

Check your model here https://forum.gsmhosting.com/vbb/f296/reset-without-lost-user-data-write-here-success-reports-2997627/

and here https://forum.gsmhosting.com/vbb/f296/oppo-lost-data-after-safe-format-2997569/

post your report to forum
[15:22:01] copy to boot folder at your PC
[15:21:59] Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.33 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE
[15:21:43] there are A509 pac boot files at Infinity support server
you can use it al boot file and for firmware flashing
[15:21:41] sir how to use it
[15:21:19] there are A509 fg boot files at Infinity support server
[15:21:03] HAVING PROBLEM WITH TECNO KA7 STILL GIVING ME DRIVER ERROR I DONT KNOW WHY
[15:20:36] I am sorry to ask you, but tell me, are you ignoring my posts just for fun or are you blind?

What is it? You got it minutes ago

Found 4 files A509W
1. iTel_A509W_F3112_11.0_OP_V021_20210902
2. iTel_A509W_F3112_11.0_OP_V024_20211013
3. DA_SPD_USC_iTel_iTel_A509W.fg
4. DA_SPD_USC_iTel_iTel_S661_A509W.fg

Make your search here @FlashFileSearchBot
[15:19:30] perfect
[15:19:17] sir any boot file for Itel A509W
[15:19:13] TECNO KE5 NOW SUCCESSFUL BOSS ON MY NEW LAPTOP NO BLUE SCREEN HERE
[15:18:33] select another loader
[15:18:22] Have you instlled USB drivers as per support instruction?
[15:17:48] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_2GB_1S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[15:17:24] Ok sir
[15:16:31] select abother model/base/loader
and finally consider to install telegram desktop and post here text but not selfies
[15:15:55] It looks like this model is not supported yet for safe reset.
Not all models are supported for safe reset yet.

Check your model here https://forum.gsmhosting.com/vbb/f296/reset-without-lost-user-data-write-here-success-reports-2997627/

and here https://forum.gsmhosting.com/vbb/f296/oppo-lost-data-after-safe-format-2997569/

post your report to forum
[15:14:08] We asked you to uninstall usb sharing tools from your PC.
You told you made it.
Your dongle was fixed with update.
Right after dongle update you run Infinity exe and you got dongle blocked again
Reason: usb sharing tool is still installed and running at your PC.

The only solution for your case is here https://infinity-box.com/?r=100174
[15:12:29] PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 0C98FD4C1D315A1E9F61AEE992B75570
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : BDAF67B6B7DD5B642642F76D37B0AE0C451D9B2229628CA27CBDED974F758F16
AGENT : 0_base : BASE_v2112 | Man
[15:12:29] PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 0C98FD4C1D315A1E9F61AEE992B75570
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : BDAF67B6B7DD5B642642F76D37B0AE0C451D9B2229628CA27CBDED974F758F16
BROM : EMI : Search
BROM : EMI :
[15:11:04] Let me send screen shot
[15:10:35] PLS TEAM AM DESPERATELY NEEDING HELP I CANT DO ANYTHING WITH THEW NEW CM2MT2 PLS Operation : Reset Settings/Format FS [ v2.33 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip A
[15:08:20] I do not know this model.
What is it\'s full name?
[15:07:56] why?
[15:01:53] also attach gere fault.bin file for Infinity software folder
[15:01:13] Itel L006S not unlocking using cm2 SP2.
[15:00:50] it\'s old text
I need new text
[15:00:17] RP652B
[15:00:01] read here how to change e-mail https://infinity-box.com/service/
[14:59:57] Ok
[14:59:41] your smartphone is bis shit, don\'t use it
you must use PC
[14:59:27] But I don\'t know my gmail account
[14:59:24] read this https://infinity-box.com/service/
[14:59:08] you must use PC and login to Infinity account
[14:58:58] How to reset my password
[14:58:35] your password is fake
[14:58:35] Here is the text it not old one sir

Username 0049428A72 == Scan CUsersFlash pointDesktopCM2_Dongle_Manager_v1.87 for report.log == Scan cInfinityBox for report.log == Scan cProgram Files for report.log == Scan cProgram Files (x86) for report.log Found files 0 == Scan CUsersFlash pointDesktopCM2_Dongle_Manager_v1.87 for .ibin.log == Scan cInfinityBox for .ibin.log == Scan cProgram Files for .ibin.log == Scan cProgram Files (x86) for .ibin.log Found files 0 == Scan CUsersFlash pointDesktopCM2_Dongle_Manager_
[14:57:52] 03D3BA786B
[14:57:47] 03D3BA786B
[14:57:15] what is username?
[14:56:52] I typ corect username and paswerd.😢 but is not login
[14:55:43] I need loader for Sm A032F SC9863A
[14:54:47] Click here @FlashFileSearchBot and type there phone name. You will get links
[14:53:18] Found 4 files A509W
1. iTel_A509W_F3112_11.0_OP_V021_20210902
2. iTel_A509W_F3112_11.0_OP_V024_20211013
3. DA_SPD_USC_iTel_iTel_A509W.fg
4. DA_SPD_USC_iTel_iTel_S661_A509W.fg

Make your search here @FlashFileSearchBot
[14:53:12] A509W loaders and pac files are at Infinity support area
use it
[14:52:21] your words have zero information
post all software log text
best way - use support forum
[14:52:16] any boot file for that Itel A33 Plus A509W
[14:51:40] sir pls changed all but still
[14:50:41] Ok
[14:50:22] Please next time read answers before make multiple posts
Thank you!
[14:49:55] Ooohh..! Thanks very much i got my credits
[14:49:51] use another loader
[14:49:31] don\'t send old screenshots
you must make \"Report\" now
[14:49:05] any solution?
[14:48:13] What is it?

https://t.me/InfinityBoxTalks/64727
[14:47:55] Are you Ok?
[14:47:47] Fixed, imei done but not write to phone
[14:47:37] please check here too sir i have change another computer
[14:47:28] Operation : SP Unlock [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Safaricom : NEON_RAY
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PA
[14:47:28] install https://desktop.telegram.org and copy text
[14:47:10] I need text
[14:47:00] Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[14:46:40] phone is damaged. you must wait next software release
credits refunded
check your account and confirm here
waiting
[14:45:51] I reflash Device but still failed
[14:45:18] copy here software log text
[14:45:03] My credit gone and operation failed
[14:44:50] Heh... Make this https://infinity-box.com/?r=100155
[14:43:39] Operation : SP Unlock [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Safaricom : NEON_RAY
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PA
[14:43:23] paste here update log text
[14:42:52] click here to check your credit https://infinity-box.com/service/
[14:42:40] i have change another computer and install cm2 pls check this log file Card found : 17FDCDD5 , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.33 ]

Mode : FULL FACTORY ( WIPE + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoad
[14:42:38] Cm2 2nd dafile faile solution
[14:42:22] solution is at your service at oficial Infinity web site https://infinity-box.com/service/
[14:41:56] run CM2SP2.exe
[14:41:28] This phone need server connection.
Enter good working password, the same as for your Infinity web account.

How to enter password https://www.youtube.com/watch?v=KogYDEkg-O8

Get username and reset password here https://infinity-box.com/?r=22
[14:37:57] It has not been fixed yet sir, I just tried updating
[14:34:18] How to check credit?
[14:32:49] Already typ correct user name and paswerd
[14:31:00] That\'s the solution
[14:30:42] Solution plz
[14:30:18] Itel A33 Plus A509W
[14:29:46] Boot _SC7731E
[14:28:15] What\'s the cpu etc
[14:24:38] any help?
[14:22:51] Octa 1.6
[14:21:59] It\'s spd cpu
[14:21:55] Is there any z61p lava loader
[14:21:37] please i need help for itel A33 plus frp
[14:21:06] Found 5 files z61
1. Reach_RZ618_Ritzy
2. Lava_NVM_Lava_Z61_MT6739_eMMC
3. DA_MTK_Lava_Lava_Z60S_Z61_Z91
4. MTK_MT6226_S958_SL_JZ61505_PCB01_GPRS_MT6226_S01.S958_SL_JZ61505_00_08_C9800_Muti_Media_16m_En_Cn.B0M
5. [14:20:15] Use ur login credentials in settings
[14:08:06] ok.Thanks
[14:07:30] Hi
It should be completed today in a short time, sorry for delay
[14:07:10] Update dongle firmware now, it will be fixed.
And please take my link about usb sharing serious
[14:05:38] I already formatted my pc and usb sharing tools is uninstalled
[14:04:03] 2022-02-14 15:47:10
[14:03:43] EXECUTING
[14:02:58] online servis infinity
[14:02:42] Hi! Hua Dongle unlimited reactivation + 1 year Helio tool for Infinity or Asansam serial 251956FB ? Not reactivation?
[14:01:20] This file is not found at support server. You can try google or other servers.

If you will get file pls upload this way https://infinity-box.com/?r=100020
[13:59:22] No idea about Android version
[13:57:03] Thanx Admini with the files of sm- G610f ,are they all latest Android versions 8.1?
[13:55:40] I need Xiaomi M2101K7BG NVdata file for CM2MT2
[13:54:55] What is your dongle S/N?
[13:54:16] Make this https://infinity-box.com/?r=100155
[13:53:56] read https://infinity-box.com/?r=100163
[13:53:26] Found 6 files G610f
1. flashfiles_combination_COMBINATION_ODD_FA60_G610FDDU1ARC1_ODDFA60_G610FDDU1ARC1_CL9139094_QB17489800_REV00_user_mid_noship.md5
2. flashfiles_tools_ENABLE_ADB_SAMG610F
3. flashfiles_SM_G610F_G610FDDU1BQHA
4. [13:51:08] Read this https://infinity-box.com/?r=100174 and make step 3
Let me know after uninstall usb sharing tools, you will get next instruction after that.
First time unblock after usb sharing is free.
Next time unblock is paid
Repeated sharing gives you permanently blocked dongle
Thank you for your future fair software usage!
[13:46:01] Here is Inifnity products group. Get Infinity dongle here https://infinity-box.com/buy/
[13:45:30] Here is the S/N 49428A72
[13:45:27] versions released before 2020-Aug-16
[13:44:44] sigma dongle is how much
[13:32:07] Please admin, my spd2 module didint open, I have updated and report and fix and yet no problem was found, what do I do
[13:23:48] Whay is the dongle S/N?
[13:18:45] 😂😂 U drunk or typo. I see!
[13:17:25] ??
[13:11:58] I need Xiaomi M2101K7BG NVdata file
[13:11:30] We don\'t want scammers on this platform ok
[13:08:59] My spd2 is not opening, have even v2. 14 still not open
[13:08:28] Repeat operation after 15 minutes
[12:58:58] ☆ Samsung ... fold, flip, ultra, all model T-mobile unlock, bit2,3,4,5,6 version, at&t, sprint
DEMO Remove... CPID IMEI Repair

☆ iPhone unlock, bypass , clean , lost, i5- 13pm
inbox @thebrainwayz --
[12:42:53] ☆ Samsung ... fold, flip, ultra, all model T-mobile unlock, bit2,3,4,5,6 version, at&t, sprint
DEMO Remove... CPID IMEI Repair

☆ iPhone unlock, bypass , clean , lost, i5- 13pm
inbox @thebrainwayz
[12:41:04] Password
[12:19:02] Link needed
[12:18:51] Sm-G610f android 8.1 u1 file needed pliz help
[11:52:52] I need to da of this oppo
[11:52:38] Hello
[11:49:45] Found 10 files ka7
1. Tecno_KA7_H8024ABC_GO_181012V173_Spark_2
2. Tecno_MT6580_TECNO_TECNO_KA7O_TECNO_KA7_O_8.1.0
3. Tecno_KA7O_H8024DEFGH_O_200618V302
4. Tecno_KA7_H8024ABC_OGo_200625V221
5. [11:49:37] Nothing found for ka7 da

Make your search here @FlashFileSearchBot
[11:49:26] because everything phone i try it still goes blue screen even tecno ka7
[11:48:16] i found out it must be a pc problem
[11:40:08] Nokia factory reset service working ?
[11:20:36] What cm2mt2 version will dongle with v0145 open?
[11:18:54] If i Tik SLA phone not connect
[11:18:45] if PC comes to bluescreen it means something wrong woth PC, f.e. wrong drivers installed or soething like that
[11:18:35] I need to format
[11:18:29] Help me
[11:17:19] As I remember you got an instruction about drivers
[11:16:34] try and see
[11:15:35] Try local sla with boot volume key
[11:14:57] Mtk
[11:14:51] I need to reset password on this oppo
[11:14:32] Hello
[10:58:54] Is the world unable to open this stubborn phone even though it is mtk
[10:58:45] Read fw
Select option?

Pack fw?
Forced read?
[10:57:45] https://forum.gsmhosting.com/vbb/f1009/oppo-reno4-z-5g-cph2065-unlock-network-2993797/
[10:54:30] any solution for oppo Reno 4 z 5G unlock network ?
[10:53:57] Hello
[10:46:14] am stuck on this phone since yesterday Tecno KE5 FRP
[10:45:14] 🙏 am really worried any way to reset frp without my windows blue screen problem? must i download the full rom?
[10:26:39] Did you even try? MTK one part easy, if used additional layer - not.
[10:25:39] Not supported.
[10:07:03] Infinity plz help me frp
[10:03:54] Full flash
[09:58:20] Oppo A3s jtag or server ☺
[09:56:43] Help me for oppo a3s sdm 450
Flash with cm2
[09:48:05] Plz give me solution frp 👆
[09:47:41] Ripsir imei
[09:46:37] Alcatel 9032z can unlock.by infinity
[09:41:17] Huawei DRA -LX3 CM2 still not support imei repair
[09:34:45] Enter good working password, the same as for your Infinity web account.

How to enter password https://www.youtube.com/watch?v=KogYDEkg-O8

Get username and reset password here https://infinity-box.com/?r=22
[09:20:28] Pls come again
[09:18:43] 2years
[09:18:24] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r

[09:18:24] I want to renew my dongle
[08:57:04] What do you want to do with it?
[08:56:43] Hello,

ESTIMATED price - https://infinity-box.com/price/
Please contact to any seller for details - https://infinity-box.com/buy/
[08:56:12] https://infinity-box.com/support/
[08:55:12] Hello,

Contact to any seller https://infinity-box.com/buy/
Send your dongle S/N to seller
Order [CM2] support renew for 1 or 2 years

How to check support date - https://infinity-box.com/doc/?r=17
[08:46:39] Thanks Bro I have fix the device
[07:45:59] How to itel p37 please
[06:22:00] chimera tool
[05:49:27] Hisens u963 no service
[05:29:26] Cm2 dongal renew price
[05:23:50] Cm2🤨
[05:23:32] Baseband ok
[05:22:54] No imei in Samsung A125. Pls how to repair this via cm2
[00:15:16] I went fromwer

InfinityBoxTalks 2022-02-17

[23:55:42] Hi guys pls any help on how to renew dongle subscriptions
[21:57:53] Thanks
[21:56:38] Type: Infinity-Box/Dongle [CM2]
S/N: 34722B87
Username: 0034722B87
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0151; Expired: 16-Dec-2021

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period
[21:51:46] Hellow.i install cm2 mt2 2.33 recomend me to update dongle firmware after reopen require the update again
[21:48:07] Hellow.i install cm2 mt2 2.33 recomend me to update dongle firmware after reopen require the update again
[21:33:42] Software trying to gel latest loaders from the server
No network access
firewall?
[21:12:52] Unlock frp tecno KF7j success on chinese miracle2 v2.32 local TECNO/RAPHAEL V2 👍👍👍
[20:58:17] Reach I mean
[20:58:07] Installed tried again even with da file once it teach authentication step system turns blue screen
[20:36:28] How to solve this error
[20:29:10] Installed
[20:27:29] this one Drivers_QcomMtk_3.0.7.7z
[20:23:02] any clue for the boot to select on the cm2mt2 software?
[20:22:44] am i selecting the wrong boot
[20:13:53] to be honest no idea what is the problem reason
KE5 is MTK
be sure that you have latest MTK SoC drivers installed.
If I remember well it\'s something like qcommtk... here https://dl2.infinity-box.com/00/pub/?dir=/soc-drivers
[20:11:28] Yes, it\'s possible. Ask akny seller https://infinity-box.com/buy/
If you have BEST and want to use CM2 you need line 8. here https://infinity-box.com/price/
[20:01:44] ==================================================
Dump File : 021722-10500-01.dmp
Crash Time : 2/17/2022 7:44:34 PM
Bug Check String :
Bug Check Code : 0x0000010d
Parameter 1 : 00000000`0000000d
Parameter 2 : ffffe282`af6dede0
Parameter 3 : ffffe282`b8199010
Parameter 4 : ffffe282`af6acdb0
Caused By Driver : Wdf01000.sys
Caused By Address : Wdf01000.sys+58920
File Description : Kernel Mode Driver Framework Runtime
Product Name : Microsoft® Windows® Opera
[19:44:12] Yes
[19:36:29] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r

[19:36:29] Please, is it possible to use BEST Dongle to activate CM2 too?
[19:31:10] How to solve this error
[19:08:31] How to format oppo a9 with cm2
[19:01:33] Okay boss I will try that and give u reply soonest
[18:59:41] Ok
[18:57:38] run this tool https://www.nirsoft.net/utils/blue_screen_view.html
tell me what dll gives a problem
[18:56:59] jut search for these files at your PC
c:/Windows/...
[18:53:18] I have two PCs and it\'s the same problem I have on both PCs. and also when I open the mtk2 When I do Smart reset, it says to check the available space on disk C or I still have 58gb free on disk C. I have the same problem in two PCs different
[18:48:50] Am using sim 10 X64 bit
[18:41:33] see 5. here https://forum.gsmhosting.com/vbb/f296/how-fix-cm2-software-can-not-run-2855041/
[18:36:39] I did not understand
[18:35:13] it may be you have some kind of drivers installed from previous installation of eltima
[18:34:52] check your PC this way https://forum.gsmhosting.com/vbb/f296/how-fix-cm2-software-can-not-run-2855041/
[18:34:43] You have this kind of errors quite often. It\'s quite strange situation.
[18:32:39] How to solve this error
[18:30:29] run CM2MT2.exe
[18:28:25] and install https://desktop.telegram.org if you want to talk here well
[18:27:21] Ignore it. Run Infinity DongleManager and Read S/N
if you can see dongle S/N - it\'s installed well
[18:12:33] For first time Sign In to Infinity Online Service (IOS) with IOS Username and FACTORY DEFAULT password.

FACTORY DEFAULT password has no effect after you change password to your own.
Sign In
[18:07:54] Sometime (unfortunately message has stopped) only this error
[18:06:34] please infinity what AST and RKT stand for ?
[18:05:21] X-TIGI V16 imei repaire mt6731...?
[18:01:27] What was the problem before flash?
[18:01:20] What was the problem before flash?
[18:00:52] What is the problem?
[18:00:33] to update your account with new e-mail address send e-mail to help@infinity-box.com
[17:52:29] Most welcome 😊😊
[17:51:58] Ok, thanks! I\'ll put it to support server
[17:50:50] 4g Feature phone mostly used in India
[17:50:30] Ok!
[17:50:16] All are lyf jio phone model .
[17:49:53] And what is this phone model name?
[17:00:16] Use cm2mt2 module
[16:59:25] possible
[16:25:25] Yes
[16:08:55] ...؟؟؟
[16:04:24] Lyf jio keypad 4g phone
[16:03:24] Lyf jio features phone
[16:03:08] Ok sir
[16:02:57] What is the brand and model name?
[16:02:32] how to screen louck TIT-Al00 MT-6580??
[16:01:14] butt you must wait
[16:00:43] Send mail help butt no reply
[15:59:55] What is your dongle S/N?
[15:57:58] open this link https://infinity-box.com/service/
there is an instruction there how to change e-mail address for your account
[15:57:29] Again send e-mail to support help@infinity-box.com
[15:57:27] Forgot email
[15:56:57] reset forgottenn password https://infinity-box.com/service/
[15:55:26] Read butt not login
[15:54:53] Samsung A125 imei repairs..needs testpoint ? Pls want to know
[15:53:44] You was warned earlier about usb sharing https://forum.infinity-box.com/viewtopic.php?p=5174#p5174
Today is last time we fix it for free for your S/N.
Next time unblock after usb sharing will be paid.
Read this https://infinity-box.com/?r=100174
[15:52:44] Make this https://infinity-box.com/?r=100155
[15:52:05] You was warned earlier about usb sharing https://forum.infinity-box.com/viewtopic.php?p=5174#p5174
Today is last time we fix it for free for your S/N.
Next time unblock after usb sharing tools will be paid.
Read this https://infinity-box.com/?r=100174
[15:40:10] Type: Infinity-Box/Dongle [CM2]
S/N: E45B2BE0
Username: 00E45B2BE0
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0140; Expired: 16-Feb-2023

[15:38:15] Download and install Infinity CM2MT2 boot-pack https://forum.infinity-box.com/viewtopic.php?t=2681
[15:25:47] Xt1750 dead after flash
I have back up firmware but still doesn’t work after flash
[15:22:08] Nokia ta-1270 after flash, no imel
[15:13:09] Hello
[15:04:09] Helps me
[14:49:10] Not login passowrd reset butt lost mail
[14:48:37] Need help sir
[13:49:39] Need help... nokia 6.2 EDL point
Need help... nokia 6.2 EDL point for frp or flashing ...


any have edl point so please
[13:48:10] I\'m sending the file for the developer to add in the next CM2SP2 update
[13:46:14] this is the flas files downloaded from Rescue and Smart Assistant
[13:44:46] this was an attempt to communicate to Moto E6i
[13:38:55] bg2-w09 dead boot any solution?
[13:13:00] Good morning, I have a problem. I started to update the dongle to install the new CM2 and now it doesn\'t open. I had CM2 2.25 installed and I wanted to install it again and it no longer opens. The program that I can do has expired.
[13:11:14] Buen día tengo un problema ne puse a actualizar en dongle para instalar el CM2 nuevo y ahora no me abre yo tenia instalado en CM2 2.25 y lo quise instalar de nuevo y ya no me abre el programa que puedo hacer se me venció licencia
[13:04:12] And after i get it back how can i reunblock it
[12:55:10] Send e-mail to support help@infinity-box.com
[12:55:10] Hello guys
My infinity cm2 dongle was stolen how can i block it?
[12:35:54] Same problem
[12:30:42] 1.89
[12:30:37] The version that is with the old one, there is another version
[12:29:36] Kmbez him the dongle and installed it
[12:18:47] https://www.mediafire.com/file/vntgk69g5p13edx/TFT.rar/file
[12:17:26] Please need help
[12:17:20] Hello
[12:15:15] Found 20 files Tecno ke5, search limit is 20 files per server
1. Tecno_MT6761_TECNO_KE5_H6123ABC_QGo_GL_201027V178_QP1A.190711.020_ke5_h6123go
2. Tecno_KE5_H6123A_QGo_RU_210913V051
3. Tecno_KE5j_H6122AB_Q_OP_210630V227
4. Tecno_MT676
[12:15:02] thanks sir my next project is tecno KE5
[12:13:10] Now i know Why many are echoing you\'re the best
[12:12:54] Where is the rest of the other definitions? I didn\'t find anything like this. Is there any help?
[12:12:51] Hi
[12:12:32] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : iTel W6502
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
F
[12:12:19] 😱
[12:08:23] DongleManager has DEFAULT FACTORY password.\r
You must use the same password as for your IOS web account.\r
\r
Reset password here https://infinity-box.com/?r=16
[12:08:23] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : iTel W6502
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002

[12:08:21] okay this is my new progress
[12:01:09] and one more thing must it be the username and password shown during reading details with cm2 Dongle Manager? my mind is telling me i change my password online
[12:00:20] okay i have added this to the list
[11:59:36] yes
[11:58:54] look at control panel and firewall there
also check antivirus if you have it installed
until now it was no requests to server from username 0017FDCDD5 so it may be two reasons:
your pc block cm2sp2 network access (I think it\'s the reason)
or
something is wrong with the phone and exe even do not try to connect to server (I don\'t think it\'s the reason)
[11:56:02] how do i know the firewall status?
[11:54:34] Hi
[11:54:26] Any body have you Lava Benco Y30 AF9030 Flash File
lcd probelem
[11:49:23] No the device erased and i want to flash it
Bg2-w09
[11:47:45] I think firewall block network access.
check both
[11:43:22] may be my password is wrong on the app let me try this suggestion
[11:42:39] Also be sure that firewall and antivirus do not block CM2SP2.exe
exe must have access to Internet to get data from server
[11:42:03] Enter good working password, the same as for your Infinity web account.

How to enter password https://www.youtube.com/watch?v=KogYDEkg-O8

Get username and reset password here https://infinity-box.com/?r=22
[11:41:36] Forgot iso username password than sp2 new username password after ok
[11:39:22] Serial No (S/N): 17FDCDD5
[11:38:53] What is the S/N?
[11:37:25] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : iTel W6502
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
F
[11:37:24] hi good day i have paid for support this is the latest sp2 software i still have this error pls help
[11:29:46] How can I get
[11:29:35] Not possible
[10:38:59] you tried reaching out but i already sorted it out
[10:37:54] For?
[10:37:13] sorry
[10:37:11]
[10:37:03] spd. sorted bro
[10:36:48] Chipset?
[10:18:07] use dafaults and connect phone
post log text
[10:15:22] nokia 1 plus frp remove by cm2sp2
[10:15:02] If it\'s connected to Meta mode like this
[10:11:53] They don\'t have the required configurations
[10:11:15] As stylo life s40
[10:10:41] V527 too
[10:10:29] Nice question
[10:09:27] 5033G network lock
[10:05:12] Redmi 9 imei not show
[09:56:08] Ok!
[09:55:32] is it stuck at boot logo?
[09:51:35] > Repeat operation in META mode!
make this option checked
[09:51:34] Is there anthor method in meta mode he say not lockd
[09:51:15] no need external loaders
use CM2SP2.exe
sc9863a
[09:46:56] no idea at the moment then
[09:46:31] Sla
[09:46:23] copy log txt before error. It\'s in operation.log file
[09:45:50] Try with built-in loaders first
[09:43:49] 5033G.
[09:43:49] U325AC
[09:42:03] u325ac
[09:41:01] Or.
[09:40:59] 5033G.
[09:40:46] ples help me
[09:39:48] EMMC: CID : 150100464536324D4203ECD0D3639705
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 464536324D42 : PRV : 0x03
EMMC: VEN : SAMSUNG : FE62MB
EMMC: SNN : 3973108579 ( 0xECD0D363 ) , MF : 9/2020

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

R
[09:39:47] PTFN : MediaTek USB Port_V1632 (COM34)
MODE : BOOTROM
PORT : 34
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2635BF4376CCA4056610BC20D2625FD4
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : CB2A8B48788FF6C12A6FF3A279E004B0834FA150E95B8492CF16B0C1C8B8B8AA
BROM : SLA : Local Au
[09:39:47] EMI : DEV : FireFly
EMI : SRC : preloader_u325.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A400 [ 233.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

EMMC: CID : 150100464536324D4203ECD0D3639705
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 464536324D42 : PRV : 0x03
EMMC: VEN : SAMSUNG : FE62MB
EMMC: SNN : 3973108
[09:39:47] Card found : FB4226B1 , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v1121431 Ok!

Update configuration ...
Socket Error # 10060
Connection timed out.
Load IDBase v1121431 Ok!

Operation : SP Unlock [ v2.33 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM34)
MODE : BOOTROM
PORT : 34
Waiting BOOT ack ...
BROM : Skip ACK
[09:39:10] Guys kindly help me with kf7j da file
Thanks
[09:36:33] Bakcup firmware
[09:35:19] 5033G only opens in flash mode.
Meta mode does not run.
[09:35:03] it;s SPD, look here https://infinity-box.com/?b=2145#2145

use CM2SP2.exe
[09:32:52] > Repeat operation in META mode!
make this option checked
[09:30:28] What operation do you want to do?
[09:28:59] X-tigi v29
[09:28:55] Found 20 files infinix, search limit is 20 files per server
1. Infinix_X620_Q6361B_O_190108V34_zero6pro_infinix_user_546_QFIL
2. Infinix_X5511_H3716B_M_IN_170822V130_Infinix_HOT_4_Pro_Infinix_X5511_13M_6.0
3. Infinix_X682C_H694CD_Q_GL_210313V327
4. [09:28:37] find infinix
[09:25:24] PTFN : MediaTek USB Port_V1632 (COM34)
MODE : BOOTROM
PORT : 34
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2635BF4376CCA4056610BC20D2625FD4
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : CB2A8B48788FF6C12A6FF3A279E004B0834FA150E95B8492CF16B0C1C8B8B8AA
BROM : SLA : Local Au
[09:25:24] EMI : DEV : FireFly
EMI : SRC : preloader_u325.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A400 [ 233.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

EMMC: CID : 150100464536324D4203ECD0D3639705
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 464536324D42 : PRV : 0x03
EMMC: VEN : SAMSUNG : FE62MB
EMMC: SNN : 3973108
[09:25:23] Card found : FB4226B1 , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v1121431 Ok!

Update configuration ...
Socket Error # 10060
Connection timed out.
Load IDBase v1121431 Ok!

Operation : SP Unlock [ v2.33 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM34)
MODE : BOOTROM
PORT : 34
Waiting BOOT ack ...
BROM : Skip ACK
[09:19:18] What is the model name?
log text before the error?
[09:17:02] post software log text with the process
[09:14:11] I do not remember this model. You can check forum for reports first.
We are collecting info, pls report your case https://infinity-box.com/?r=100169
[09:09:48] I think the same way as any other network. Try it.
[09:09:15] Is it Ok or do you have any problem with it?
[09:06:26] Your PC antivirus or Firewall block CM2 Internet access.
Enable Internet access for CM2 software modules
[09:05:18] Hi,
What do you mean dead emmc?
[09:03:14] socket error what is the problem
[09:02:31] DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A400 [ 233.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

EMMC: CID : 150100464536324D4203ECD0D3639705
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 464536324D42 : PRV : 0x03
EMMC: VEN : SAMSUNG : FE62MB
EMMC: SNN : 3973108579 ( 0xECD0D363 ) , MF : 9/2020

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]

[09:02:31] Operation : SP Unlock [ v2.33 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM34)
MODE : BOOTROM
PORT : 34
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2635BF4376CCA4056610BC20D2625FD4
BROM : SecLevel : 0
[09:00:57] Try bro
[08:52:19] Haw to unlock network cricket mtk with cm2
[08:52:17] Bro try and if error send logs here
[08:51:29] Pls house I want to be sure if it\'s possible to flash techno b1f security code without data lost
[08:49:20] Possible?
[08:49:12] Techno B1f unlock without data lost
[08:37:26] Send error log
[08:27:13] Mt 6739
[08:25:56] Chipset?
[08:25:32] Cm2mt2 bro
[08:25:18] Cm2mt2 3
[08:13:24] Help Alcatel 5033G network code tried all tricks but can\'t unlock sim network code tried even to tick SLA and meta mode
[08:02:19] V2043-21
[08:01:52] How to solve this error
[07:48:10] Nothing found for vivo v2066

Make your search here @FlashFileSearchBot
[07:16:04] Chipset?
[07:00:51] Finger on hy
[06:55:50] Bhai vivo y20 set on hy pettren read hoskta hy?
[06:38:55]
[06:35:22] done.
[06:11:10] 🙏🤦‍♂sorry boss
[06:10:19] please post only Infinity related things here
rest people can use google
[06:08:39] Send logs
[06:08:22] Check if AP Version were the same 👌
[06:07:54] Baseband status?
[06:07:01] https://forum.gsmhosting.com/vbb/f672/world-1st-exclusive-a127f-a12-exynos-850-isp-pinout-frp-reset-dump-file-read-2992115/
[05:58:41] Nokia ta1233 network lock possible it\'s mtk gives an error when I try with brom or meta both the same
[05:35:47] no
[05:27:12] Can i flash samsung firmware j700f on device with j700t
[04:52:57] help pls
[04:40:48] IMEI :(
[04:40:39] only one problem left.
[04:38:22] https://www.mediafire.com/file/43d6e6n49xuuza0/INFINIX-SMART-5-X657C-H6117GH-QGo-GL-211018V263-RepairMyMobile.zip/file
[04:38:19] tested scatter here.
[04:36:48] thanks CM2M2
[04:36:37] infinix smart 5 X657C client came and the handset is dead. but detected.
[03:02:16] Any one nokia 1352 fdl file
[02:38:47] any one know to to make this firmware pass to phone ...its bored firmware for bg2-w09
[02:37:58] [FL] : HW verification passed!

[FL] : Pre-Flash backup
[FL] : Pre-Flash backup passed!

SEC_DL : False (CUST)
SEC_DL : SECURE USB DL DISABLED
SEC_ID : 0x35464646304237304435444533464335

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000000080000
Erase : 0x0000000001D00000 : 0x00000000B3AC0000
Erase : 0x00000000D57C0000 : 0x000000006AF34200

[FL] : RePartition
ERR : 0xC0030008
ERR : INVALID GPT
ERR : 0x00000000|0x00000000

Error : Flashing failed!
>>> Seems as something wrong with device! Check batt
[02:37:58] Card found : 52093574 , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v1121431 Ok!

UserName and/or Password not set! Can\'t continue!

Load IDBase v1121431 Ok!

Preloader [HW DEV] Info :
EMI : DEV : MT8127
EMI : SRC : preloader_bg2_w09.bin
EMI : CNT : 0001
EMI : [00] : DRAM : LP_DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 1.00 GB ]

Operation : Write Flash [ v2.33 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Ver
[02:06:59] A127f you want to remove frp?
[00:46:52] tomorrow I will send the file that I captured by the motorola program
[00:39:07] Suport
Moto E6i (XT2053-5)
CPU SPD 9863a
????
[00:36:28] A127f not test point ?
[00:35:14] a125f is have test point
[00:33:23] Hello Samsung a12 a127f test point
[00:25:39] hi
can i fix dead emmc in cm2 for bg2-w02?

InfinityBoxTalks 2022-02-16

[22:17:18] OK boss so i should intick dose option nxt tym ryt
[22:09:37] Infinix Hot 10 Play X688B FRP Remove Done Infinity Box
https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/
[22:08:25] Tecno Spark 7 PR651H frp remove done
https://forum.gsmhosting.com/vbb/f296/tecno-spark-7-pr651h-frp-remove-done-3005093/
[22:07:55] Samsung A10s (A107M) KG LOCK DONE
https://forum.gsmhosting.com/vbb/f296/samsung-a10s-a107m-kg-lock-done-3005106/
[22:07:29] Redmi 9 Lancelot IMEI Repair done by KING CM2
https://forum.gsmhosting.com/vbb/f296/redmi-9-lancelot-imei-repair-done-king-cm2-3005116/
[22:06:14] Itel l6502 frp unlock at just one click cm2


Device Connected!
BootVersion : SPRD3
Boot : PAC : L6502-F3208-10.0-IN-V051-20211115_1035_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification .
[22:01:38] Infinix Hot 10i Spd PR652B Reset Pattern FRP Cm2
https://youtu.be/31Wv-otP7Hw
[21:49:40] https://forum.gsmhosting.com/vbb/f296/nokia-g10-aka-ta-1334-suported-2994645/
[21:40:23] https://youtu.be/7ZSfGFKpNcE
[21:09:47] https://youtu.be/Z9K2lgJeM3A
[20:55:40] Use cm2mt2 bro via test point
[20:53:03] Yes available
[20:41:53] I wanted to remove password 🔑 Lock 🔐🔒🔐🔐
[20:41:35] What\'s the solution to return it to the normal mode
[20:35:44] bootloader has been unlocked
[20:23:54] Nokia G20 password remove any help?
[19:47:00] Flash phone with working tested file
[19:46:36] TA-1270
[19:46:03] Phone model?
[19:26:04] hello sir how are you please help me error 1100 when i flash iphone 11 pro
[19:02:48] good gentlemen, in the group there is a section called files, in that section take a look because there are many custom loaders there, greetings
[18:33:08] https://support.halabtech.com/index.php?a=downloads&b=file&id=452806 anyone can help me this firmware
[18:23:59] g \\7
[17:56:15] 09016772972 whatsapp
[17:43:54] ITEL P15 CLONE SP7731GEA 6.0 S4-W5005-V02 Looking for this clone file
[17:41:27] Here https://infinity-box.com/buy/

More,, but not verified, are here https://forum.gsmhosting.com/vbb/f296/resellers-infinity-products-infinity-credits-stock-1976320/
[17:37:34] connect me to some one that will help me renew my dongle pls
[17:37:15] hmm not supported by my dongle have not renew
[17:36:33] you are using CM2SPD v2.12 but RSA auth was enabled for v2.13
https://infinity-box.com/news/?r=4155

install CM2SP2 v2.13 or v2.14
[17:34:09] Restore the original IMEI
[17:31:55] Can cm2 reset vivo y30 how?
[17:21:11] device not unlocking frp RSA AUTH REQUIRED
[17:18:22] Operation : Format FS / Reset Settings [ v2.12 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : iTel W6502
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
F
[17:18:18] thanks sir done but this is the log pls
[17:17:49] Please help
[17:16:13] Itel L6502 spd frp ?
[17:14:37] how to boot cm2 spd2?
[17:14:04] please help
[17:13:26] thanks greatly
[17:12:11] Vivo y12s reset how?
[17:09:47] cpu spd
[17:08:18] کسب درآمد بدون سرمایه
سلام دوستان عزیز
این یک پلتفرم (سایت) باز هست که متعلق به یک شرکت مالزیایی هست که برای کاربران خود سود معینی را مشخص کرده است
سود روزانه ی دریافتی شما بستگی به مقدار سرمایه گذاری شما دارد
به این ترتیب که
برای زیر 2000 ترون 2.5 درصد سود روزانه
برای بالای 2000 ترون تا 2000
[17:01:09] is showing support for only fdl & pac
[17:00:48] hello sir downloaded and extracted but cant load it pls how do i load it to spd2
[16:53:26] 😔
[16:53:24] Thanks
[16:49:53] great thanks sir let me login and download sharply
[16:49:11] fg is fdl rplacement
also you can select pac file as loader
[16:48:50] i mean the .fg file?
[16:48:37] pls sir do i still load it to the fdl
[16:48:20] i know of only fdl
[16:48:09] oh so .fg is supported too
[16:47:05] Completed
[16:42:12] have tried many boots not working
[16:42:00] pls i need help with this itel s16 (w6502) frp unlock pls
[16:27:54] Nothing found for itel w6502 fdl

Make your search here @FlashFileSearchBot
[16:27:21] Nothing found for itel w6502 da

Make your search here @FlashFileSearchBot
[16:27:17] Sorry for everything.
I failed and I recognize my mistake.
[16:26:50] Found 5 files itel w6502
1. iTel_W6502_F3108_10.0_OP_V028_20210304
2. iTel_W6502_F3108_10.0_OP_V032_20210802
3. iTel_W6502_F3108_10.0_OP_V031_20210531
4. iTel_W6502_F3108_10.0_OP_V033_20210922
5. [16:26:35] Found 5 files ITEL W6502
1. iTel_W6502_F3108_10.0_OP_V028_20210304
2. iTel_W6502_F3108_10.0_OP_V032_20210802
3. iTel_W6502_F3108_10.0_OP_V031_20210531
4. iTel_W6502_F3108_10.0_OP_V033_20210922
5. DA_SPD_USC_iTel_iTel_W6502.fg

You can also try:
1. Alpha Kane files collection
2. firmwarefile
3. needrombd
4. androidxda
5. xdafirmware
6. androiddatahost
7. testedflashfiles
8. romadd

Channel - Group Chat
[16:25:50] FILE/ itel w6502
[16:25:18] FILE/ ITEL W6502
[16:19:47] Solution for Honor 8a frp please.
[16:12:24] And I am very sad that we must spend our time with kind of stupid block. I want to make new updated software but I must spend myy time with this stupid situation
[16:11:23] you can login now and do as per instruction
[16:11:02] Boss how will I pay if until login my account does not accept?
[16:10:53] if you will make any orders before unblock account will be blocked permanently
We do not support usb sharing and asked users many times do not share dongles.
Now time to be strong
[16:09:48] you can login now and do as per instruction
[16:09:07] https://forum.infinity-box.com/viewtopic.php?t=4034
[16:08:56] yes, you recharged
now check this how to make account unblock
[16:08:35] How to fix Infinity CM2 or [BEST] dongle after repeatedly Sharing usage
https://forum.infinity-box.com/viewtopic.php?t=4034
[16:08:21] I already recharged the 100 credits confirm it in my account.
[16:07:58] See line #12 here https://infinity-box.com/price/
[16:07:36] penalty for REPEATED usb sharing is 100 credits
[16:07:22] you can not do make any orders before you unblock your dongle
[16:07:02] My username does not accept login on my iOS.
[16:06:59] You know. Your account is blocked now due to repeatedly usb sharinh
[16:06:03] 004FD307E0
[16:05:59] WHat is the problem with the order?
[16:05:50] What is your username?
[16:05:38] Admin can you help me with my order I stopped working
[16:04:05] uninstall usb sharing drivers. See step #5 here https://forum.gsmhosting.com/vbb/f296/how-fix-cm2-software-can-not-run-2855041/
[16:02:27] click here https://infinity-box.com/support/
[16:02:06] What is your Username?
[16:01:26] also you can reset password if you forgot it
[16:01:13] Now use factory password if you did not change password yet
[16:00:37] It\'s easy. Click here https://infinity-box.com/support/
[16:00:01] ..
[15:59:49] ☺️
[15:59:47] Boss.
[15:59:38] https://infinity-box.com/support/?r=23
[15:03:26] Operation : Identify [ v2.12 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : [DMOBILE]Infinix_PR652B .pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ;
[15:02:33] سریال رو برگردمن ب سریال اصلی مشکلش حل میشه
[14:58:14] Hi
Htc d816h flash file?
[14:50:28] 👍
[14:50:08] Thanks he worked
[14:46:47] After using cm2 to reset Nokia 2.4 is giving me error message
[14:34:52] C/infinity box/spd2
[14:34:14] Paste uk off file in spd folder
[14:33:57] https://www.4shared.com/file/4fH_Ivpgei/uk_online.html
[14:31:58] Type: Infinity-Box/Dongle [CM2]
S/N: 4FD307E0
Username: 004FD307E0
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0152; Expired: 30-Sep-2022

[14:12:49] cm spd 2 i can not get imei option uk edition is off help
[14:08:49] Lost
[14:05:22] Tecno f1 rbmb clean please help me 😢😢
[13:45:56] How do i check my cm2 expiry date
[13:35:27] 🤔
[13:18:02] Boss after all what did I do in this group wrong they blocked my account they asked me to top up 100 credits.
Reloaded but still playing like this?
[13:10:54] Please can you help me in my PV please 🙏🙏
[13:05:29] look for the processor in the Infinity software, properly installed drivers and do the process
[12:37:09] OK I know all that. But getting like sc9820
[12:35:39] open device manager and connect the mobile with the USB cable to the computer and see what driver you get
[12:33:14] I\'m going to download files from server but i didn\'t find the way
[12:33:14] How can I read the details of spd cpu without disasembling
[12:31:55] neon ray
[12:27:55] It\'s spd...........??
[12:26:25] Who knows the cpu of this phone
[12:16:03] There is no connection at all
check your cable and drivers, reboot PC
[12:11:53] I need dump file samsung a207f
[12:11:38] Samsung a207f ka dump file h kya kisi k pas
[12:07:25] install https://desktop.telegram.org and copy text
[12:07:06] I try to sp unlock it say remove battery and re conect
[12:04:19] run Infinity CM2SP2.exe
[12:02:01] haw to fix nokia Ta1264 sim lock pls help
[12:00:27] haw to fix Ta1264 sim lock pls help
[11:53:24] copy here software log text with your try regarding the mentoned phone
[11:49:02] There is no such imei in database
[11:48:50] After FULL FACTORY ( FORCED + FRP ) encryption error, reset from phone done
[11:48:16] Sign In to your Infinity account, you can see there all you old and current orders.
In case of problem with order upload copy software log text
[11:47:12] it looks like this model is not supported for \"smart reset\" function yet
[11:42:22] https://youtu.be/z09aT0-ab9E
[11:40:32] What is the problem with it?
[11:28:48] because I\'m new of cm2 i already have infinity BEST but cm2 I\'m new member.
[11:27:11] It\'s impossible.
Write here
[11:25:53] thanks i appreciate it. but is possible to connect my pc via Anysesk or ...
[11:06:15] 3 min
[11:05:30] Help.
[11:05:12] Boss.
[11:02:36] connect phone with CM2SP2.exe make IDENTIFY and after that see available software buttons.
[10:55:52] done
[10:53:24] done
[10:53:21] Operation : Reset Settings/Format FS [ v2.33 ]

Mode : FULL FACTORY ( FORCED + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : LGE Mobile USB Serial Port (COM87)
MODE : PRELOADER PORT
PORT : 87
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BR
[10:47:57] 357648973694882

Administrator I have this nokia when giving unlock on the dongle says that the request has been submitted.
Checking on iOS it does not appear
Credits have not been reduced.

I already had this problem when I canceled a c10.

I\'m asking to check if it was canceled or not.
[10:47:22] LG K11 Plus (LM-X410EOW)
[10:47:00] Operation : Reset Settings/Format FS [ v2.33 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : LGE Mobile USB Serial Port (COM87)
MODE : PRELOADER PORT
PORT : 87
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SB
[10:44:55] DOOGEE X90L is not found at support server. You can try google or other servers.

If you will get file pls upload this way https://infinity-box.com/?r=100020
[10:43:14] Enter good working e-mail address.
If you still have a problem contact to help@infinity-box.com and supportrs will activate your dongle manually in 5 minutes
[10:42:12] See here How to know your Infinity Username and reset forgotten password https://infinity-box.com/service/
[10:41:35] Yes
[10:40:46] X-serie
[10:39:37] brand bestyyo xplus
[10:39:06] As I remember it\'s 1.89 but v188 works well too.
Download latest Infinity DongleManager here https://infinity-box.com/support/?s=6
[10:36:30] if at the software level it is ok, the problem is at the hardware level
[10:29:35] What is the model name?
[10:29:16] Login here now https://infinity-box.com/service/
You will see your account and Products menu
Let me know after login
[10:26:14] How to solve this error
[10:25:00] is there any fix or hard ware issue
[10:23:34] ok, I thought you were talking about removing my cloud account, in relation to unlock if the IMEI is good it should not cause problems
[10:23:24] There is no wiko y82 file at support server yet. You can try google or other servers.

If you will get file pls upload this way https://infinity-box.com/?r=100020
[10:22:07] SOC GEN : SPRD ( Legacy )
BuildInfo : MMX_Q402+_010_0500_V3.0_130918
Platform Version: MOCORTM_15C_W17.15.4_P15_Debug
Project Version: sc983x_cp1
BASE Version: FM_BASE_15C_W17.15.4_P23_0717
HW Version: sc983x_modem
CMP_Time : 07-17-2018 19:44:49

MODEM TAG : MOCORTM_15C_W17.15.4_P15_Debug_FM_BASE_15C_W17.15.4_P23_0717_sc983x_modem_sc983x_cp1

NVMng : SecurityInfo
IMEI[1] : 867400020316612
IMEI[2] : 867400020316620
WIFIMAC : 4045DAE0F00D
BT_MAC : 4045DA5B5712
SEC : SLS:0, SKS:0, SKV:0

SLStat
[10:21:41] Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : SPRD ( Legacy )
BuildInfo : MMX_Q402+_010_0500_V3.0_130918

NVMng : SecurityInfo
IMEI[1] : 867400020316612
IMEI[2] : 867400020316620
WIFIMAC : 4045DAE0F00D
BT_MAC : 4045DA5B5712
SEC : SLS:0, SKS:0, SKV:0

New SecInfo :
IMEI[1] : 9116366081—
IMEI[2] : 9116366081—

NVMng : Security data updated!

Done!
Elapsed: 00:00:28
[10:21:02] but imei was good and simlock was fine too
[10:20:30] good, yes of course by server
[10:06:26] What was the firmware version before flash?
[10:05:41] Friend, I respect your efforts but please look at this group name.
Future post videos only as per group name.
[09:57:22] Send pic
[09:55:27] After clicking smart reset extra on Samsung A22 so as to remove kg locked the phone doesn\'t start normally untill i hard reset what might be the final solution fam? AND whenever i reset it kg locked shows up on the screen still...Any help will be appreciated fam
[09:46:51] .
[09:46:45] @Developer_41 can forever lock be fixed
[09:41:06] Hello infinity is there a way whereby i can remove oppo A3s passcode using cm2?
[09:24:24] What do you need
[08:59:55] Found 20 files Doogee, search limit is 20 files per server
1. Vanzo_MT6580_Vanzo_X50_8.1.0_DOOGEE_X50_Android_go_20180710_O11019_wd359bf
2. Vanzo_MT6737M_Vanzo_X50L_8.1.0_DOOGEE_X50L_Android_go_20180612_O11019_nd359b
3. Doogee_MT6737M_DOOGEE_X7pro_6.0_DOOGEE_X7pro_Android6.0_20171011_MRA58K_x6069_dg_a50_37m65
4. Doogee_MT6737M_DOOGEE_X5max_PRO_6.0_DOOGEE_X5max_PRO_Android6.0_20170217_MRA58K_n370b
5. Doogee_MT6763_DOOGEE_Y9Plus_9_DOOGEE_Y9Plus_Android9.0_20200229_PPR1.180610.011_Y9Plus_EEA
6. Doogee_MT6580_D
[08:52:34] Found 20 files Dooge, search limit is 20 files per server
1. Vanzo_MT6580_Vanzo_X50_8.1.0_DOOGEE_X50_Android_go_20180710_O11019_wd359bf
2. Vanzo_MT6737M_Vanzo_X50L_8.1.0_DOOGEE_X50L_Android_go_20180612_O11019_nd359b
3. Doogee_MT6737M_DOOGEE_X7pro_6.0_DOOGEE_X7pro_Android6.0_20171011_MRA58K_x6069_dg_a50_37m65
4. Doogee_MT6737M_DOOGEE_X5max_PRO_6.0_DOOGEE_X5max_PRO_Android6.0_20170217_MRA58K_n370b
5. Doogee_MT6763_DOOGEE_Y9Plus_9_DOOGEE_Y9Plus_Android9.0_20200229_PPR1.180610.011_Y9Plus_EEA
6. Doogee_MT6580_DO
[08:50:51] hi, looking for DOOGEE X90L FIRMWARE
[08:35:50] Operation : Reset Settings/Format FS [ v2.33 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM72)
MODE : BOOTROM
PORT : 72
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 69BD117779F15E51A6A03B866274D9BB
BROM : SecLevel : 0x
[08:29:58] a10s
[08:28:53] samsung a10s help
[08:28:42] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM3)
MODE : BOOTROM
PORT : 3
Error : Failed to open port!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!
[08:26:29] Still same
[08:26:25] Imei repaired
[08:19:39] 😂😂😂
[08:19:02] Need Flyme acc reset
[08:18:53] Patch Level : MRA58K
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-03-05
Build Time : 10.11.2017
Board Platform : mt6737m
Product Brand : meizu
Product Manfct : meizu
Display ID : Flyme 6.0.2.3G
Product Model : M5c
Product Name : meizu_M5c
Product Device : M5c
Product Board : M5c
Product Info : M5c
[08:12:05] Am facing this error \"Wrong email\" while trying to activate a new CM2MT2 dongle
[08:09:45] bro can you come to my PV? i have questions about my username
[08:08:38] no
[08:08:11] hello guys does cm2 support kirin UPU\'s ?
[07:57:30] All services u can do by IOS list here
https://infinity-box.com/price/
[07:56:38] My account has already recharged the 32 dollars
I signed in on my iOS accepted
Will you accept unlocking phones?
[07:56:17] is any any hot key
[07:56:10] is not connecting to normal port on usb
[07:55:40] u can try unlock in diag mode
[07:55:16] phone is jio locked
[07:55:13] Always send complete logs
[07:54:57] Correct fdl required to boot this
[07:54:56] Device Connected!
BootVersion : SPRD3
Boot : INF : Micromax : Micromax Q402+
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!
[07:54:49] It\'s not boot well
[07:54:36] Device Connected!
BootVersion : SPRD3
Boot : INF : Micromax : Micromax Q402+
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
>>> ERROR : FLASH FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[07:54:19] Logs
[07:53:33] Q402+ factory reset sucessful.. but device info failed
[07:53:07] Sar
[07:49:19] Damn 😢
[07:47:38]
[07:47:24] i know tag him
[07:47:11]
[07:47:01] 😏
[07:46:20] Exynos 1200
[07:45:57] Chipset of this?
[07:45:07] A53
[07:44:39] Model?
[07:40:06] Is it possible to remove Samsung password without data loss ?, is there any tool that can do this job ?
[07:24:10] Least version dongle manager is v1.88!??
[07:05:10] How to use infinity cm2 dongle credit??
[07:04:07] Send your IOS Username to seller https://infinity-box.com/buy/\r
\r
How to know Username https://infinity-box.com/service/
[07:04:07] Help how to buy credit on infinity cm2 dongle
[06:16:32] Found 20 files wiko, search limit is 20 files per server
1. Wiko_MT6580_WIKO_JERRY2_v2610_7.0_alps_mp_n0.mp2_V1_tinno6580.we.n_P136
2. Wiko_MT6572_WIKO_IGGY_wiko_4.2.2_ALPS.JB3.MP.V1
3. Wiko_Wiko_Lenny_5_W_K400_V01.26.OPE.20_Oreo_8.1_GBL
4. [06:03:57] Anyone have a wiko y82 k630 SPD .pac file, please help.
[06:03:20] https://youtu.be/_tSemnnJlhQ
[05:59:29] Yes I can
[05:57:12] Found 5 files tecno ch6
1. Tecno_CH6_H6912D_R_OP_211108V388
2. Tecno_CH6n_H6912EF_R_OP_211108V633
3. Tecno_CH6n_H6912E_R_RU_210918V374
4. Tecno_CH6n_H6912E_R_TR_211013V495
5. [05:32:38] After flashing V33 the device started constant rebooting so am looking for a higher latest on to fix it
[05:19:48] Ok
[02:18:03] A03 Core SPD not MTK
[02:00:53] https://youtu.be/dZBmn6zwoW0

InfinityBoxTalks 2022-02-15

[23:44:07] Hello help me to reset user lock on Oppo R17 pro
[23:11:21] Nothing found for oppo f11 Pro cph1969

Make your search here @FlashFileSearchBot
[23:10:06] Found 2 files cph1969
1. Oppo_Realme_CPH1938_CPH1969_CPH1911_11_F.04_Extracted
2. Oppo_Realme_CPH1969EX_11_C.31_200918_MT6771_Extracted

Make your search here @FlashFileSearchBot
[22:29:59] Thanks.
[22:28:30] https://www.youtube.com/watch?v=zrLJDF1gogY
[22:27:40] Make identify in diag mod
[21:42:41] Samsung Galaxy SM A032F SC9863A frp
[21:27:56] it looks like nvram content is damaged
what to do: wait next update with complete repair function
[21:08:12] 🆘
[21:08:07] Help.
[20:19:45] It does just search through chats you will see how it done
[20:19:39] pac file and loaders are at your service. Try with your phone
[20:19:18] Found 3 files neon ray pro
1. Safaricom_SP9832E_10_SFC_NEON_RAY_PRO_10.0_V01_20200117_QP1A.190711.020_NEON_RAY_PRO
2. DA_SPD_USC_Safaricom_Safaricom_Neon_Ray_Pro_Lite.fg
3. DA_SPD_USC_Safaricom_Safaricom_Neon_Ray_Pro.fg

Make your search here @FlashFileSearchBot
[20:18:46] Need some help,does safaricom neon ray pro support cm2spd and if yes which base does one use
[20:14:18] Yeah it like Nigerians are loud and demanding
[20:13:14] People from many countries are here
[20:12:50] Just interesting to know. Nothing else
[20:12:19] Admin what is it with been from Nigeria?
[19:25:35] It is me. Activating the account needs 100 credits was paid.😒
[19:13:26] Who is that Antonio? :)
[18:49:54] Ok
[18:49:25] How to slove the problem
[18:39:27] Untill first try, of course
[18:38:51] Cm2mt2 is correct software
[18:35:44] make, model, variant, problem, operation?
[18:34:04] Until when?
[18:24:30] it\'s not an error, it\'s an instruction
[18:23:49] It do not work this way friend.
install https://desktop.telegram.org and copy text
[18:18:59] Listen to the audio please
[18:09:25] WHAT God bless you..
[17:58:14] Friend, without problem description and software logs we can\'t say anything
[17:37:33] Im using cm2mt2 I have erreur
[17:34:42] latest SoC drivers
[17:34:11] Be sure you have SoC drivers installed well https://infinity-box.com/support/
[17:33:57] Okay
[17:33:37] https://www.youtube.com/watch?v=zrLJDF1gogY
[17:32:56] KG state process https://forum.infinity-box.com/viewtopic.php?t=3949
[17:32:41] You can try another model/base or boot file.
Amd pls copy/paste text but not photo
[17:30:15] Hello fam how can i use it to unlock kg locked?
[17:22:01] Found 8 files Itel A571w
1. iTel_A571W_F3116_10.0_OP_V022_20210917
2. iTel_A571W_F3116_10.0_OP_V018_20210623
3. iTel_NVM_iTel_A571W_MOCORTM_17C_W20.21.2_P9_Debug_FM_BASE_17C_W20.21.2_P9_sc7731e_modem_pike2_pub_nvram
4. iTel_A571W_F31
[17:21:47] send e-mail to help@infinity-box.com
[17:21:26] Reset password here - https://infinity-box.com/?r=17

if you lost your mailbox send e-mail to to fix help@infinity-box.com
[17:20:42] Or cm2mt2 ?
[17:19:44] Cm2sp2 i didn\'t find the appropriate Porte !
[17:16:14] A03 core ?? Saported?
[17:15:36] Samsung spd cpu A41 frp supported???
[17:12:54] screenshot and full log
[17:01:18] Any help
[17:01:15] Oppo a5s bootloop
[16:48:09] Try with sSLA option checked.
Also what is the phone model name?
[16:42:46] Don\'t worry just pay 32$, and start again as usual
[16:42:30] 😒
[16:42:04] There is no such file at support server yet. You can try google or other servers.

If you will get file pls upload this way https://infinity-box.com/?r=100020
[16:41:44] I got this error
[16:40:50] I did not try this model yet. You can try and see result
[16:39:15] Regular rules violation is little bit wrong way.
Our patience is almost unlimited but from now we start new fight against unfair dongle usage with aim to help our hard working and loyal users to be on top.
[16:36:55] Sorry administrator.

The information came to me and sorry for everything.
[16:36:47] SM A032F
[16:35:56] Download here https://infinity-box.com/support/

Buy dongle here https://infinity-box.com/buy/
[16:35:27] Samsung Galaxy SM A032F SC9863A frp file needed
[16:35:06] model?
[16:34:57] little bit late but anyway better late than never
[16:34:52] I want to remove FRP by CM2
[16:33:25] 😔😔ja.finished reading.
Sorry.
[16:31:02] Also I want to sent this to you personally https://infinity-box.com/?r=100174
you know why
[16:30:21] install https://desktop.telegram.org and copy text here
[16:30:11] Sorry.
[16:30:09] Ok bro.
[16:29:47] ?
[16:19:23] Pleae change your telegram profile image.
We asked you several times already, so it now.
[16:14:19] yes
[16:08:11] Need Unlock
[15:53:38] Samsung Galaxy SM A032F SC9863A frp file needed
[15:47:09] Itel A571w firmware
[15:04:30] Nokia ta 1385 network unlock is available?
[15:03:23] Lost e-mail?
[15:00:38] I\'ve reinstall it but the problem still persists
[14:59:12] Username: 002D52E9D7
[14:58:59] ineed reset my ios pass
[14:55:40] Nokia ta 1385 network unlock is available?
[14:53:02] But i do flash with dat option Wen flashing tecno infinix and everything went well
[14:45:59] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM8)
MODE : BOOTROM
PORT : 8
Error : Failed to open port!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!


Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power of
[14:28:42] Reinstall libusb drivers
[14:26:11] BKK-LX2
[14:14:00] I am new here
[14:13:47] Any link download
[14:13:34] How to install this infinity cm2
[14:07:09] Found 5 files tecno ch6
1. Tecno_CH6_H6912D_R_OP_211108V388
2. Tecno_CH6n_H6912EF_R_OP_211108V633
3. Tecno_CH6n_H6912E_R_RU_210918V374
4. Tecno_CH6n_H6912E_R_TR_211013V495
5. [13:48:23] Nokia c20 privacy tool
[13:28:37] nokia c20 simlock supported with cm2sp2?
[12:46:42] Nokia 3.1 plus cricket network unlock can it be possible if possible how paid or Free I need urgent
[12:25:02] Build number?
[12:24:05] untick auto EMI in Setting
[12:24:05] AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_s96116ca1.bin
EMI : CNT : 0007
EMI : Init EMI from INTERNAL DB

DA : SETUP EMI PARAMS FAILED!
ERROR : ABORT

Error : Fail to init protocol!
>>> Internal
[12:23:58] samsung a10s showing this error
[12:23:34] try to use latest exe
[12:14:32] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.31

Load IDBase v1121431 Ok!

UserName and/or Password not set! Can\'t continue!

Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.31 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM
[12:06:49] dm me
[12:06:27] How to unlock kg on samsung a02
[12:04:51] Can you activate for me?
[12:04:02] Infinity BB5 Easy Service Tool [BEST] software activation is separate activation and doesn\'t depends on main Infinity-Box validity. Even if your main Infinity-Box is 10 years old without renewal you can still activate BEST on it.
[11:54:41] I\'ve renewed my CM2 dongle recently. Can I activate BEST on it while support on CM2 dongle is till 2024?
[11:45:13] Tecno Camon 18
[11:44:13] Brand?
[11:43:15] Ch6 firmware
[11:36:36] https://t.me/InfinityBoxTalks
[11:33:28] Tks
[11:28:54] welcome to group
[11:28:37] hello
[11:26:43] Hello
[11:22:41] I think is software problem
[11:20:08] in most cases it means it\'s hardware fault
[11:19:37] Only no service
[11:18:57] No make call
[11:18:37] Yes
[11:18:22] call 112/emergency. can you make a call?
[11:18:16] Yes
[11:18:06] Yes
[11:17:53] is imei ok?
[11:17:37] Hisense u963 no service ?
[11:14:33] Mtk
[11:13:59] https://youtu.be/hNuWMrv4aQ0
[11:09:04] thanks
[11:08:34] Mtk
[11:08:06] Chipset?
[11:07:05] https://www.youtube.com/watch?v=OGjAuuDmczM
[11:05:33] How to unlock kg on sqmsung a02
[11:05:14] how make lodar sir
[11:03:50] perfect!
[11:02:42] finally done with file
[11:02:26] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!


Open : itel_L6006_100_0801_080721.pac
VER : BP_R1.0.0
LEN : 2.71 GiB
CPU : sp9832e_1h10
VER : itel_L6006_100_0801_080721

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : itel-L6006
Product Model : itel L6006
Product Name : SU385JIO
Patch Level : QP1A.190711.020
Display ID : itel_L6006_100_0801_080721
Ver. Incmt : IN-JIO-V008-20210708
Ver. CodeName : REL
Ver. Release : 10
[10:55:10] phone modle name?
[10:49:31] try with all loder in 9832e but not secess
[10:48:08] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!


Open : L6006-SU385-10-IN-V040-20211110.pac
VER : BP_R1.0.0
LEN : 2.61 GiB
CPU : sp9832e_1h10
VER : L6006-SU385-10-IN-V040-20211110

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : itel-L6006
Product Model : itel L6006
Product Name : SU385
Patch Level : QP1A.190711.020
Display ID : L6006-SU385-10-IN-V040-20211110
Ver. Incmt : IN-V040-20211110
Ver. CodeName : REL
Ver. Releas
[10:47:13] select another loader
[10:46:53] what is your phone model name?
[10:46:12] Found 3 files P651W
1. iTel_P651W_F3116_10.0_OP_V033_20210906
2. iTel_P651W_F3116_10.0_OP_V032_20210816
3. DA_SPD_USC_iTel_iTel_P651W.fg

Make your search here @FlashFileSearchBot
[10:45:56] Found 3 files P651W
1. iTel_P651W_F3116_10.0_OP_V033_20210906
2. iTel_P651W_F3116_10.0_OP_V032_20210816
3. DA_SPD_USC_iTel_iTel_P651W.fg

Make your search here @FlashFileSearchBot
[10:45:32] Yea thanks
[10:45:25] channel has many videos
in acse of problem post log text
[10:44:59] see here cm2sp2 examples for frp https://www.youtube.com/watch?v=k12vycmUuv4&list=PLyckadDfx7JFmrM-R3XSJrKQebaPSxKSt
[10:44:16] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!


Open : L6006-SU385-10-IN-V040-20211110.pac
VER : BP_R1.0.0
LEN : 2.61 GiB
CPU : sp9832e_1h10
VER : L6006-SU385-10-IN-V040-20211110

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : itel-L6006
Product Model : itel L6006
Product Name : SU385
Patch Level : QP1A.190711.020
Display ID : L6006-SU385-10-IN-V040-20211110
Ver. Incmt : IN-V040-20211110
Ver. CodeName : REL
Ver. Releas
[10:43:54] I edit the main comment in with i mentioned
[10:43:41] It worked with default uni 7 only
[10:43:12] copy log text here, we make device database
[10:43:10] any help in my case sir
[10:42:25] There is no nvram file for this model at support server yet
[10:42:20] It worked .. done
[10:41:57] In case of accidents you know what to do.
And my advice - if you want to flash or repair phone run CM2 alone, close all other toold because if your PC freez due to high load you may get phone damaged.
[10:41:52] use the custom loader that I have given you and post the result
[10:40:18] Any chance to get complete log text?
install https://desktop.telegram.org and copy text
[10:40:17] uses the same unisoc T700 processor
[10:38:45] try to make IDENTIFY and post softwre log text
[10:38:05] Operation : Format FS / Reset Settings [ v2.13 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Re
[10:38:05] I think it\'s 105 4G and it\'s spd. try with cm2sp2
[10:36:45] Can not tell you anything yet. So many tasks are in process at the same time.
I\'ll remind developers about it
[10:36:19] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!


Open : L6006-SU385-10-IN-V040-20211110.pac
VER : BP_R1.0.0
LEN : 2.61 GiB
CPU : sp9832e_1h10
VER : L6006-SU385-10-IN-V040-20211110

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : itel-L6006
Product Model : itel L6006
Product Name : SU385
Patch Level : QP1A.190711.020
Display ID : L6006-SU385-10-IN-V040-20211110
Ver. Incmt : IN-V040-20211110
Ver. CodeName : REL
Ver. Releas
[10:23:32] But not free
[10:20:14] https://support.halabtech.com/index.php?a=downloads&b=file&id=570063
[10:19:11] pleas replay team
[10:17:03] Yup done it
[10:16:18] Unisoc Tiger 700
[10:08:59] Backup NVRAM?
(ZTE Blade A7s 2020)
[10:08:48] I remember mine got that error and I had to contact support to get it fixed. Im my case i was using visual studio for a school project which was minimized and i launched cm2 to work for a client. At times its not with the intention to debug cm2. I think it should be free. Accidents do happen
[10:08:14] try with all type in 9832E type
[10:07:37] need frp reset
[10:07:19] Operation : Identify [ v2.13 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : itel_L6006_100_1601_101121
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

Platform Version: MOCORTM_18A_ITELQ_W21.09.5_Debug
Project Version: shark
[10:05:44] Sar unisoc 700 spd supported? Moto e30 dual
[09:59:55] Ask any seller https://infinity-box.com/buy/

More sellers are here https://forum.gsmhosting.com/vbb/f296/resellers-infinity-products-infinity-credits-stock-1976320/
[09:58:59] Type: Infinity-Box/Dongle [CM2]
S/N: 40B49580
Username: 0040B49580
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0137; Expired: 18-Dec-2018

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period
[09:11:53] Admin how far are you with this file mobigo 2 i uploaded?
[08:40:38] Nokia TA-1385 cpu type? Unisoc or which one?? I struggling to know it platform here
[08:31:34] Found 1 file w5504
1. iTel_W5504_F3103_8.1_OP_V057_20210326

Make your search here @FlashFileSearchBot
[08:07:39] yah
[08:06:48] This is kg state
[08:05:46] samsung A12 how to remove Mkopa with CM2 any one please help
[07:59:07] Dongle support expired? Maybe be true. Buy renewal? How do I buy it. Remember am in remote town
[07:53:28] If dongle support is valid just upgrade it via dongle manager. If dongle support has expired buy renewal first and then upgrade.
[07:50:18] https://t.me/Freemoviesonnetflix





Please join and support Netflix Movies

♻️♻️♻️♻️♻️♻️♻️♻️♻️

Joining us for free.
Request any movie you wanna watch and have a chance to chat to big calibrates in the universe

🔰🔰🔰🔰🔰🔰🔰🔰🔰
[07:48:58] It is never safe to format secure phone while flashing
[07:41:23] Dose dat ho for vivo unticking dose option ...???🤔🤔🤔
[07:38:07] I have solution
[07:36:04] yes my mistake
[07:34:24] There is your mistake now u have to find j-tag to reprogram your phone
[07:33:17] i nothing untick as default i keep
[07:30:26] Did you untick safe erase and update PMT before flashing..?
[07:28:31] vivo y20 model its alive before starting restarting issue . i download firmware from infinity site and start flashing and now become erased state
[07:07:53] 🙏
[07:07:37] use PC
[07:07:25] Friend, you flash phones with PC.
Best way - install telegram to work PC and you can copy/paste info and write here right from your work PC
[07:07:24] On android not Pc
[07:06:35] You can post your contacts here https://forum.gsmhosting.com/vbb/f296/resellers-infinity-products-infinity-credits-stock-1976320/

Also you can send e-mail to help@infinity-box.com and jon to Infinity group for Dealers
[07:01:27] LG k42 network unlocking
[07:01:01] Ok, will continue to use Pc
[07:00:08] On Pc no problem sir, but in my Android sir
[06:59:09] Thanks infinity team
[06:54:53] Hello
[06:54:24] What is your \"not work\" means my dear? Please explain
[06:53:06] Are you from Nigeria?
[06:51:14] You must reply to supporters with info they asked you.
Do you finally understand how to do that?
[06:50:07] Hello
[06:47:50] What is the model name?
Is it dead or alive phone?
[06:45:43] Click here @FlashFileSearchBot and type there phone name. You will get links
[06:45:37] Click here @FlashFileSearchBot and type there phone name. You will get links
[06:45:29] Hi
Don\'t ask, just write your problem,
Supporters check all posts
[06:40:16] What about qlm tool update. Oh sorry to ask update in progress 😂😂😂
[06:37:42] How to use Infinity CM2 or [BEST] Dongle with usb/network/remote Sharing and Debuggers or similar tools https://infinity-box.com/?r=100174
[06:05:16] If not I want to be login the server my dongle is working perfectly
[06:04:14] So what will I do I have tried it also not working
[05:48:13] Hi
[05:40:35] how to clean rpmb with infinity cm2 ?
[05:40:17] Overall status :

STORAGE : Life Status : eMMC : OK!


RPMB : RPMB KEY PROGRAMMED [UNUSABLE]


STORAGE : OTP Status : NOT Enabled!


Done!
Elapsed: 00:00:48
[04:57:04] Card found : 1DAEBB0D , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Memory Tool Init [ v2.33 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM72)
MODE : BOOTROM
PORT : 72
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CH
[03:02:16] what happend?
[03:00:30] hello someone from support
[00:47:35] get it from Infinity support server
[00:47:22] Found 5 files w6502
1. iTel_W6502_F3108_10.0_OP_V028_20210304
2. iTel_W6502_F3108_10.0_OP_V032_20210802
3. iTel_W6502_F3108_10.0_OP_V031_20210531
4. iTel_W6502_F3108_10.0_OP_V033_20210922
5. [00:46:49] Help this itel boot

InfinityBoxTalks 2022-02-14

[23:35:57] Nothing found for Nokia 1191

Make your search here @FlashFileSearchBot
[23:35:29] Found 48 files nokia 2.2, search limit is 20 files per server
1. Nokia_8000_4G_8000_4G_TA_1311_6.0.1_MSM8909_MMB29M_2020_11_24
2. Nokia_G10_TA_1334_G10_MT6765_HMD_Global_00WW_11_00WW_1_070_RP1A.200720.011_ROGA_sprout.2021_04_05
3. Nokia_copy_M118_61M_PCB01_gsm_MT6261_S01_BOOTLOADER_V005.M118_M_YFSPIDN
[22:47:17] https://support.halabtech.com/index.php?a=downloads&b=file&id=408812
[21:51:09] Hve you replied to support with required data?
[21:40:33] What is not clear here?
[21:39:27] please copy/paste here e-mail messahe text that yu got from supporters
[21:39:24] In the IOS log in
[21:38:53] I have tried lost email not working
[21:37:05] read mail text and send to support info that they ask
[21:33:05] No frp
[21:31:25] So I don\'t have access to it
[21:30:46] The valid one I don\'t know the owner
[21:30:05] I suggest you read e-mail and follow the instruction.
[21:29:40] Ok, read now once again and do as rep text you read
[21:29:40] His not help me to achieve what I want
[21:29:16] Yes
[21:28:32] Can you read mail text?
[21:28:01] The valid one is not mine
[21:26:29] We will see 👍
[21:26:22] you must read e-mail and follow the instruction
[21:26:04] I got your point. Thanks for reminder, we will do according your advice
[21:24:53] I\'m done
[21:24:50] Sorry yeah
[21:24:44] 😳If our old customers thinks they make it by themselves better buy new dongle 😳
[21:23:23] No share no matter what.
[21:23:14] 🙈 Renew + credits I think we deserve more security
[21:21:38] You\'re team already gave us too much chance..
[21:21:09] Ok
[21:20:55] Just some kind of \"Like\"
[21:20:46] We gives people chance. First time we unlock dongles in most cases.
Next time procedure is little bit different
[21:20:17] But definitely I hate remote jobs
[21:19:55] what does this mean
[21:19:53] I\'m from Mozambique
[21:19:48] 😂Sorry my broken English
[21:19:32] I used to get more than 6 customers per day, now they prefer virtual job
[21:19:17] Are you from Nigeria?
[21:18:35] Lol
[21:18:33] Block and unlocked it 10mins
[21:18:08] Also if you know sites or facebook accounts who offer sharing you can post it here
we will block it immediatelly
[21:18:04] Many customers now make his self services by share
[21:17:21] I\'ll thankfully
[21:16:44] ok, as per your advice we will make protection stronger
[21:16:09] nice
next time you must check your mailbox before write here wrong infomation
[21:15:54] And u can even fix it
[21:15:43] Infinity team, your customers are killing market by share dongle 😐
[21:15:13] No problem
[21:15:11] I saw this one now
[21:15:04] this one has no password, I apologize for the mega link
[21:13:53] Tecno DroidPad 10D P904 - OneDrive
https://onedrive.live.com/?authkey=%21ABsumX%5FohlDgh8w&id=415B9ADB5BEAA77E%211661&cid=415B9ADB5BEAA77E
[21:13:35] Password?
[21:13:24] Firmware Tecno DroidPad 10D P904: Download
[21:13:14] File is password protected
[21:12:55] File is password protected
[21:12:42] Firmware Tecno DroidPad 10D P904: Download
[21:12:34] you told you sent many messages.
give me screenshots of ALL your messages.
I must check your problem
[21:11:20] But the link they are giving does help me for the particular thing I want to achieve
[21:10:15] make screenshots of ALL your e-mail messages
[21:09:36] date and time
[21:09:23] Even yesterday
[21:08:47] do it now
[21:08:41] to find your mail I need date and time
[21:08:19] give me exact dates!
[21:08:10] run CM2SP2.exe and do the job
copy/paste here software log text in case of any problem
[21:08:06] Since last week
[21:07:06] How many times?
Tell me dates and times
[21:06:51] How do I go about it? Login or not
[21:06:35] I know, just to get a confirmation
[21:06:23] Yes
[21:06:12] Are you from Nigeria?
[21:06:05] Please you have any link that will help me to achieve that please I need to change that email account because it was not mine
[21:06:02] How many times?
Tell me dates and times
[21:05:47] Do not use USB HUB.
Try to use another USB cable, use short cable.
Try another USB port
Use USB3 port (blue color) if available

Also it may be some kind of latest HW modifications but Im not sure. Let me know about all tests, we will see
[21:03:14] I have tried it many times
[21:03:14] No good response
[21:01:34] What do you mean?
[21:01:22] I have done no good assistant
[20:59:29] send e-mail to help@infinity-box.com
[20:55:35] Please house how can I change email account to another email so that i can reset my login password thanks help me
[20:45:46] https://youtu.be/azY7Gs-pz14
[20:43:33] Don\'t make tiktok any more, use youtube instead
[20:41:26] https://vm.tiktok.com/ZSeWjLQr1/
[20:38:13] If you want to work at popatoes traders market you can start it anytime.
If you want to wor in high-tech industry you must learn but not only click to buttons.
[20:33:08] you are making something wrong. start to explain the problem
[20:32:21] post software log text
[20:31:54] Copy software log text this way https://forum.infinity-box.com/viewtopic.php?t=1828
[20:29:26] https://forum.infinity-box.com/viewtopic.php?t=2681
[20:28:40] S5 Lite X652B
CM2MT2\\CM2MT2.exe MT6765

Are you sure your phone is SPD?
[20:27:37] This phone need server connection.
Enter good working password, the same as for your Infinity web account.

How to enter password https://www.youtube.com/watch?v=KogYDEkg-O8

Get username and reset password here https://infinity-box.com/?r=22
[20:25:18] Any software log text for it?
[20:18:03] Please add Lenovo k11 in next update
[20:11:02] You can see there list of models with information about exe file name and CPU selection
[20:10:34] Its main page of Infinty site
[20:10:23] Yes friends, I understand your troubles with differnt exe files.
But I have good news for you.
Click here https://infinity-box.com/?b=1857#1857
[20:02:49] True
[19:59:32] The method, test point or direct USB to remove KG
[19:41:07] https://forum.infinity-box.com/viewtopic.php?t=3949
[19:32:43] How will I remove KG lock with CM2
[19:22:30] you got youtube manual for it
[19:21:46] I think almost any of latest can do it
CM2SP2\\CM2SP2.exe
sc7731e;sp7731e
[19:14:56] I need to reset this oppo
[19:11:57] Which version of spd2 can remove tecno BD2 frp
[18:53:43] sp2 has imei spd version does not have imei
[18:49:06] Tomorrow if my customer will return his device to my workshop.
[18:47:23] https://youtu.be/Tk7_kAV4rog
[18:47:04] Ok
[18:37:57] Qualcomm
[18:37:41] Help me to do hard reset Oppo R17 pro
[18:37:21] Hello
[18:31:54] Please post result here later
[18:31:00] It\'s firmware. You can use pac firmware as loader too
[18:26:45] Make this https://infinity-box.com/?r=100155
[18:26:16] There is no such file at support server yet. You can try google or other servers.

If you will get file pls upload this way https://infinity-box.com/?r=100020
[18:25:38] flash chip can not be erased or written - see log text
it may be hw fault
but also you may try to use another loaders, f.e. default bases but not manual base selection that you are using
[18:24:59] Problem
[18:24:52] Bootloop
[18:24:38] Oppo a5s cph1909
[18:24:36] Wipe Ok: FRP
What is the problem with it?
[18:21:42] What is the password for the file?
[17:58:01] 9820e
[17:53:37] if you have the same processor no problem
[17:51:41] I will try it although the file you provided is Neon Ray Pro Lite instead of Neon Ray Pro.
Is it the same?
[17:47:47] Hope this can help you
[17:47:10] Thank you
[17:44:29] Is it fdl or firmware?
[17:42:41] Found 1 file Safaricom Neon Ray Pro
1. Safaricom_SP9832E_10_SFC_NEON_RAY_PRO_10.0_V01_20200117_QP1A.190711.020_NEON_RAY_PRO

You can also try:
1. Alpha Kane files collection
2. firmwarefile
3. needrombd
4. androidxda
5. xdafirmware
6. androiddatahost
7. testedflashfiles
8. romadd

Channel - Group Chat
[17:37:32] Safaricom Neon Ray Pro fdl file please
[17:31:59] Okay I will ✅
[17:28:36] Hello, this is the group of infinity dongle not of z3x
[17:28:01] You unzip it and copy and paste it in the installation directory of infinity mtk folder boot gionee repeat operation
[17:01:47] Has it served you?
[16:49:01] https://www.youtube.com/watch?v=Y0jp7mJHiag
[16:48:49] Gionee F205 MT6739 Frp Unlock
[16:45:04] Gionee f205
[16:44:56] I Want to flash
[16:44:13] Operation : Write Flash [ v2.33 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Disabled

Files :18
[FL] : Set : preloader_gnsz6739_66_n1.bin
[FL] : Set : recovery-verified.img
[FL] : Set : md1rom-verified.img
[FL] : Set : md1dsp-verified.img
[FL] : Set : spmfw-verified.bin
[FL] : Set : mcupmfw-verified.img
[FL] : Set : lk-verified.bin
[FL] : Set : lk-verified.bin
[FL] : Set : loader_ext-veri
[16:44:04] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : Sec
[16:39:43] HOT 10 PLAY NVRAM X688B
[16:39:05] The phone said système failed
[16:31:50] 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Moto : G20
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

B
[16:25:14] there you have it
[16:24:45] https://mega.nz/file/lMtETSbR#6JT0D6Huy_KbN85X7xVF_40BMb2sEmWmqXgURRGolVI
[16:23:40] Gentlemen, it is very difficult to find firmwares, the more information you provide, the better the help will be, thank you very much.
[16:22:30] There is no such file at support server yet. You can try google or other servers.

If you will get file pls upload for all this way https://infinity-box.com/?r=100020
[16:22:19] Good, it costs you a lot to be more specific, thank you very much
[16:21:38] Found 3 files itel s661w
1. iTel_S661W_F3118_11.0_OP_V025_20211011
2. iTel_S661W_F3118_11.0_OP_V021_20210916
3. iTel_S661W_F3118_11.0_OP_V019_20210831

Make your search here @FlashFileSearchBot
[16:18:39] Tecno Droipad 10D file
[16:17:17] File itel s661w
[16:14:35] Good, the file that I am going to pass you, you copy and paste it in the infinity spd installation directory in the boot folder and search for itel or create them, post the result and it has been useful, thank you very much.

BR
[16:11:24] The cm2mtk can\'t open 👐 others are working fine any solution
[16:10:12] cpu SC7731e
[16:07:53] Still the same error 🚨
[16:03:48] Somebody should try it and post software log text.
best way - here https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/

we check models and add to server page as per reports of users
[16:01:16] Yes but the model is not listed under model type section
[16:00:08] Thanks
[15:59:52] run CM2SP2.exe
[15:58:14] Click here @FlashFileSearchBot and type there phone name. You will get links
[15:56:16] ITEL L6004 FRP BYPASS
[15:55:25] Make this https://infinity-box.com/?r=100155
[15:24:39] Is phone in dead state?
[15:06:16] Help me
[15:06:10] Operation : Write Flash [ v2.33 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Disabled

Files :18
[FL] : Set : preloader_gnsz6739_66_n1.bin
[FL] : Set : recovery-verified.img
[FL] : Set : md1rom-verified.img
[FL] : Set : md1dsp-verified.img
[FL] : Set : spmfw-verified.bin
[FL] : Set : mcupmfw-verified.img
[FL] : Set : lk-verified.bin
[FL] : Set : lk-verified.bin
[FL] : Set : loader_ext-veri
[15:06:03] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : Sec
[15:03:25] Same problem
[14:57:06] https://youtu.be/LeqBsNsZiYY
[14:55:07] Charger battery 1st or flash without battery
[14:53:53] Help me i want to flash gionee f205
[14:53:19] Operation : Write Flash [ v2.33 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Disabled

Files :18
[FL] : Set : preloader_gnsz6739_66_n1.bin
[FL] : Set : recovery-verified.img
[FL] : Set : md1rom-verified.img
[FL] : Set : md1dsp-verified.img
[FL] : Set : spmfw-verified.bin
[FL] : Set : mcupmfw-verified.img
[FL] : Set : lk-verified.bin
[FL] : Set : lk-verified.bin
[FL] : Set : loader_ext-veri
[14:51:01] spd
[14:50:35] X652b CPU mtk
[14:48:49] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : Sec
[14:47:54] Hello
[14:31:35] X652b Spd solution plz
[14:01:31] Cm2 showing 3 models only how to add more
[13:57:40] X657B format fail with cm2
[13:56:43] Open dongle manger and uk off
[13:43:05] Found 2 files cph1717
1. Oppo_CPH1717EX_11_A.28_200701_Extracted
2. Oppo_MT6750_OPPO_7.1.1_CPH1717EX_11_A.12_180427_N4F26M_17351

Make your search here @FlashFileSearchBot
[13:37:42] X657B full factory not done
[13:07:18] log
[13:00:17] Tecno Y2 operation fail with infinity cm2
[12:20:41] https://www.youtube.com/watch?v=Yozxicq7zkA
[12:20:31] Vivo V21 5G (V2066) FRP/ Google account by pass just only one click with cm2 2022
[12:18:01] Found 8 files itel A16 plus
1. iTel_A16Plus_SA332RU_8.1_RU_V015_20210302
2. iTel_A16Plus_SA332Q_10_OP_V012_20210602
3. iTel_A16Plus_SA332Q_10_OP_V009_20210313
4. iTel_A16Plus_SA332Q_10_OP_V006_20210108
5. [12:17:03] Itel A16 plus
[12:16:14] https://www.youtube.com/watch?v=YUokU-Y3-bc
[12:16:04] 🤔
[12:16:02] Vivo Y21 V2111 Frp Pattern Unlock Cm2
[12:13:33] No.
[11:58:01] Spd
[11:57:11] Card found : 1A32BEC0 , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v1121431 Ok!

UserName and/or Password not set! Can\'t continue!

Load IDBase v1121431 Ok!

Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BR
[11:56:25] Connect while holding volume up and down
[11:55:40] All drivers install complete but same problems only this model . another device okay
[11:55:26] Chipset?
[11:54:56] Install driver mtk and sp driver from support and make sure to connect device with appropriate boot keys
[11:52:57] Good sirs, screenshots in conditions to see, complete logs of the operations that you have carried out, complete information, if we do things in conditions, thank you very much.
[11:52:43] Good sirs, screenshots in conditions to see, complete logs of the operations that you have carried out, complete information, if we do things in conditions, thank you very much.
[11:50:25] which model
[11:49:51] Fail to identify
[11:49:32] Vivo v21
[11:33:25] Meaning
[11:32:35] no
[11:31:25] Good, if they serve you
[11:30:38] Found 5 files meizu m3 note
1. Meizu_NVM_Meizu_m3_note_MT6755_6F67BF25E6F1F7BC78382BF924402004
2. Meizu_NVM_Meizu_m3_note_MT6755_eMMC_862840035231527
3. Meizu_MT6755_Meizu_m3_note_5.1_Flyme_5.1.3.4G_LMY47I_m3note_L681H_31.08.2016
4. Meizu_Meizu_M681H_MT6755_Meizu_m3_note_5.1_Flyme_5.1.3.6A_LMY47I_m3note
5. Meizu_MT6755_Meizu_M681H_5.1_Flyme_5.1.6.0A_LMY47I_m3_note_UKR_RUS_Global

You can also try:
1. Alpha Kane files collection
2. firmwarefile
3. needrombd
4. androidxda
5. xdafirmware
6. androiddatahost
7.
[11:23:09] Hello, what model and variant is it?
[11:05:50] Just download firmware and put it on flasher
Then do operation thats u need
[11:04:57] This is need fdl
[10:59:46] Really
[10:57:34] Yup bro
[10:55:00] Greetings bro
[10:53:27] Greetings to all
[10:47:10] I told you to snap and send phone present condition you refuse
[10:46:23] Sorry am not referring to you check the name is FRANCE not George
[10:45:26] Have tried all
[10:45:13] Not working
[10:35:05] Ok, you\'re welcome
[10:34:21] Operation : Reset Settings/Format FS [ v2.33 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM72)
MODE : BOOTROM
PORT : 72
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : C6C56332BC932DD68AF98B1A8F1DA14C
BROM
[10:34:13] Done arleady
[10:34:10] Fixed?
[10:34:08] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM72)
MODE : BOOTROM
PORT : 72
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : C6C56332BC932DD68AF98B1A8F1DA14C
BROM : SecLevel : 0x0000000
[10:33:07] Use volume keys to factory reset bro
[10:31:28] Same as how snap and send present phone condition now
[10:30:15] Yes with same firmware on it but same
And can\'t wipe data tooo
[10:30:03] Hardware fault bro
[10:29:20] Can this device be 512 or 1gb?
[10:28:42] Same as in?*
[10:28:28] I have flash it with many firmware fro from support but still the same
[10:27:24] Download firmware
[10:27:15] Please help how to fix this
Infinix x657b got brick on update
[10:26:15] Help with this 👆👆👆👆👆
[10:25:00] I try but not working 👆👆👆👆
[10:22:52] Operation : Repair Security [ v2.33 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Repair Security [ v2.33 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632
[10:22:40] Go to your system root folder>infinity box>cm2mt2 > log then copy and paste
[10:17:05] i have not a backup
[10:16:48] newly one bro
[10:14:00] is that backup or newly one
[10:05:06] same probleme bro
[10:01:08] Infinix note 8i I wipe the phone the Tom frint stop walking
[09:57:10] write nvdata bro
[09:48:42] Any solution
[09:48:36] Hello team oppo a1k after format imei invalid
Operation : Repair Security [ v2.33 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID :
[09:35:15] But stuck
[09:32:51] CPU?
[09:32:44] Done
[09:30:28] Infinix note 11 x663 frp
[09:20:49] Format in diag mod.
Tick diag mod and format
Donc press any Key to do operation
[09:18:51] Ok thanks sir
[09:18:06] Bad pic
[09:17:46] Go to service and send pic
[09:16:13] does anyone have FDL for this phone?
[09:15:59] Vendor : Mobicel
Model : NEO_1
Device : NEO_1
Android : 11
Product : sp9832e_1h10_go
Brand : Mobicel
Serial : 5082136005071101
Build_tm : Mon Jun 28 18:21:32 CST 2021
DisplayID : RP1A.201005.001 release-keys
Patch Ver : RP1A.201005.001
SecPatch : 2021-05-05
Hardware : sp9832e_1h10_go
HW Board : NEO_1
CPU rel : armeabi-v7a
SIM Card : NETWO
[09:14:38] Send tool pic
[09:14:26] Tick diag mod and try bro
[09:13:56] Card found : E365151E , v0152
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot
[09:10:29] Log text
[09:10:11] Log text
[09:10:00] Sla failed
[09:09:57] Send log
[09:09:51] Bro
[09:09:16] Cm2mt2 vivo v21 connect error.how to solved this problem?
[09:08:43] Send pic
[09:08:26] It\'s Done but still have password
[09:07:40] Format in diag mod
[09:07:04] Screen lock
[09:06:58] Factory reset
[09:06:44] Frp ?
[09:06:40] What do you need
[09:06:28] Try diag mod
[09:06:22] Diag mod
[09:02:57] nokia ta-1383
[09:02:33] Card found : E365151E , v0152
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot
[08:37:46] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : Itel W6502
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH
[08:31:12] After choosing the Boot you try again the operation
[08:28:16] please copy/paste software log text, it helps other users in future
[08:27:35] https://youtu.be/zTAyVBUeMP4
[08:23:58] it\'s MTK
try with CM2MT2.exe
[08:15:24] Not found
[08:14:39] K
[08:14:08] Found 5 files w6502
1. iTel_W6502_F3108_10.0_OP_V028_20210304
2. iTel_W6502_F3108_10.0_OP_V032_20210802
3. iTel_W6502_F3108_10.0_OP_V031_20210531
4. iTel_W6502_F3108_10.0_OP_V033_20210922
5. [08:13:43] Itel w6502 frp file pls
[08:01:41] via test point
[08:01:16] Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Memory Tool Init [ v2.33 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
B
[07:59:56] Done ✅✅✅✅
[07:58:54] With cm2
[07:58:41] Has anyone bypass frp Lock on TECNO BD3
[07:57:51] iPhone 8plus, I cloud they have flash it, can get a video how I can bypass it
[07:57:07] hoping so, isp is complex
[07:55:19] TECNO BD3 frp bypass
[07:47:21] There will always be a solution.
But for isp 😂😂😂😂😭 no.
[07:45:44] 😭😭🥲
[07:36:01] Ok thanks so much for the link
[07:23:57] you must try
[07:23:36] Have you tried that?
[07:22:54] Found 4 files a509w
1. iTel_A509W_F3112_11.0_OP_V021_20210902
2. iTel_A509W_F3112_11.0_OP_V024_20211013
3. DA_SPD_USC_iTel_A509W.fg
4. DA_SPD_USC_iTel_S661_A509W.fg

Make your search here @FlashFileSearchBot
[07:22:48] get your A509W boot files for free from Infinity server
[07:22:05] Ok
[07:21:21] This itel no boot 2 infinity
[07:21:20] Yes
[07:19:49] Are you sure model name is correct?
[07:19:48] Item a33 plus
[07:18:37] itel a5009w
[07:18:15] inbox is little bit forbidden here
if you know how to fix - write here for everybody
[07:10:43] What is your itel model name?
[07:06:31] Please help whit boot support itel android 11
[07:06:02] Found 2 files tecno b1g
1. Tecno_B1g_SP559ABC_QGo_OP_210910V014
2. Tecno_SP7731E_10_B1g_SP559ABC_QGo_OP_210402V010_QP1A.190711.020_sp7731e_1h10

Make your search here @FlashFileSearchBot
[07:05:50] Use Infinity software built-in loaders or get .pac file from support server and use it as loader
[07:05:26] Found 28 files k11, search limit is 20 files per server
1. OneClick_OneClick_K112i_SPRD_SPI_GIGADEVICE_GD25Q_4MiB
2. Videocon_V1522_B144B_K11_20140424
3. Videocon_V1522_B144B_K11_20140526
4. Vernee_Vernee_Mars_Pro_20170907_MT6757_K11
[07:04:42] This phone need server connection.

Enter good working password, the same as for your Infinity web account.

How to enter password https://www.youtube.com/watch?v=KogYDEkg-O8

Get username and reset password here https://infinity-box.com/?r=22
[07:04:38] It is possible bro..if intersted come
[07:04:22] What is the problem my friend?
[07:03:43] Friend, what credit do you talk about?
You must read text that you see on screen but don\'t smoke too much.

You must enetr your Infinty Account Username and password.
Operation is free.
[06:58:44] Please use this way:
1. install https://desktop.telegram.org
2. Get log text https://forum.infinity-box.com/viewtopic.php?t=1828
3. Copy log text https://forum.infinity-box.com/viewtopic.php?f=3&t=1380
[06:57:11] Please do not copy text to your phone. It was very nice but absolutely useless way.
Telegram Desktop helps you!
[06:56:07] install https://desktop.telegram.org and copy text
[06:55:45] Ok, you can copy/paste log text here
[06:53:56] Why?
[06:52:32] Make sure u input ur correct infinity username & password, then make sure u pc is connected to the internet bcos i also experience it yesterday & it work 4 me
[06:50:31] U need to select w6503 on ur cpu
[06:49:43] guys tecno b1g frp loader
[06:45:30] it didn\'t work if i did all of them
[06:07:05] ?
[06:07:03] Show need credit)
[06:06:55] I reset Frp itel s16pro version 2
[06:06:29] hi
[05:10:41] Change your ram
[04:33:53] I want to post log here👆 like this format
[04:29:18] https://Payout123.com/?userid=126294
[04:27:24] What you need?
[04:17:06] Only upgrade binary possible but downgrade binary cant bro
[04:14:47] Also it is not simple to create account on gsm hosting forum
[04:09:33] I do not seen what i want in this section
[04:08:20] If mtk do it in meta mode no need da file
[03:24:05] Work about more software features is in progress, new software will be released as soon as it will well tested.\r
\r
Please tell us list of required supported CPU types and functions
[03:24:05] Qualcomm update ?
[01:36:44] Ok
[01:36:43] Hi
[01:16:46] Qualcom update
[01:13:41] Hi

InfinityBoxTalks 2022-02-13

[22:52:21] This software is not available at the moment.
See here available options https://infinity-box.com/price/
[22:20:16] Pls How do I activate Samsung module for my dongle
[21:39:46] Support forum is at your service 24/7/365 https://infinity-box.com/?r=8
[21:25:36] To copy and Paste operation log is not issue but to me my problem is, i want to paste in good format like in HTML format but unfortunatelly in Telegram not supported nowdays... Though my previous Telegram (i don remember the version) worked before.
Anyone with good idea can share here.
[20:21:30] Use dongle manager and off uk
[20:14:34] Phone flashed with wrong firmware so i can\'t get really info, but i think this spd phone has one or two variant
[20:12:01] You can\'t
[20:10:42] What is firmware version name?
[19:02:17] New firmware not supported Z3X
[19:01:54] Yes but network patch fail
[18:59:54] Ok imei status?
[18:59:02] Copy software log text this way https://forum.infinity-box.com/viewtopic.php?t=1828
[18:57:26] What is the AP version on your device?
[18:57:20] Emergency call only after upgrade to U2
[18:56:30] As in network repair as how, any error if sim is inserted ?
[18:54:39] Don\'t force mybe phone is damaged
[18:54:08] Not supported this model
[18:53:58] Solved?
[18:53:46] Wat nxt den nossese
[18:53:35] A325f please same body help to guid me downgrade u2 to u1

I have the file how to used it pls i will pay
[18:53:35] 😱😱😱
[18:53:32] 🙄🙄😳🤔🤔
[18:52:44] You can\'t downgrade all Samsung MTK device are fused loked
[18:51:42] Hmj how come pls just tel me
[18:51:23] Oka us tel nw
[18:50:28] A325f please same body help to guid me downgrade to u1

I have the file how to used it pls i will pay
[18:36:05] Tecno KD7h clone (Spd) firmware need (urgent)
[17:55:16] inbox Software Information
[17:54:39] He not take boot info
[17:54:18] K11 Mtk 6765cpu
[17:53:52] Sir I try all bases all fail hang
[17:53:00] to repair IMEI you don\'t need da file
[17:33:00] Dear team I need Lenovo k11 Da file I need to repair iemi
[17:25:21] Anyone with A32 binary 2 network repair solution
[16:22:19] Reinstalo libusb drivers, files are at C:\\Infinitybox\\tools
[15:28:21] iTel A33 w5001p

Run CM2SP2\\CM2SP2.exe sc7731e;sp7731e

see https://infinity-box.com/?b=1857#1857
[15:27:36] Thank you 🙏🏾
[15:19:48] Itel a33 plus frp
[14:45:01] Found 20 files Nokia 111, search limit is 20 files per server
1. Nokia_copy_J106_5_61D_11C_128X160_PCB01_gprs_MT6261_S00_copy_Nokia_106_TA_1114
2. Nokia_copy_M106_61D_PCB01_gprs_MT6261_S00.M1062_IC_190814_V01_copy_Nokia_106_TA_1114
3. pm_collection_RM_781_Nokia_300_351686056111454_0_400
4.
[14:44:16] Found 60 files Nokia 1, search limit is 20 files per server
1. Nokia_8000_4G_8000_4G_TA_1311_6.0.1_MSM8909_MMB29M_2020_11_24
2. Nokia_G10_TA_1334_G10_MT6765_HMD_Global_00WW_11_00WW_1_070_RP1A.200720.011_ROGA_sprout.2021_04_05
3. recent_Nokia_nokia_ta_1174_spd_file
4. [14:29:32] Ok thank solved👍
[14:19:56] do not mix different packages, select all IJ or all IC files
[14:00:46] 9?
[13:46:45] 9
[13:45:49] first two links are firmware files
last one is loader file
[13:44:58] Found 3 files Itel p651W
1. iTel_P651W_F3116_10.0_OP_V033_20210906
2. iTel_P651W_F3116_10.0_OP_V032_20210816
3. DA_SPD_USC_iTel_P651W.fg

Make your search here @FlashFileSearchBot
[13:42:03] I do not have one can l have a link to a good file
[13:41:31] Have you tried to flash with good firmware?
[13:40:11] Itel p651W bootloop solution
[13:35:39] https://forum.infinity-box.com/viewtopic.php?t=3977
[13:34:51] Something like that https://www.youtube.com/results?search_query=mtk+drivers+uninstall
[13:25:23] Qualcomm Snapdragon 210
Try CM2QLM.exe
[13:24:11] https://forum.infinity-box.com/viewtopic.php?t=3977
[13:23:46] Found 6 files TA-1032
1. NVM_NV_MT6737_eMMC_Nokia_3_TA_1032_CM2
2. N_3_N_3_TA_1020_TA_1028_TA_1032_TA_1038_here
3. N_3_N_3_TA_1032_MT6737M_Heart_7.1.1_alps_mp_n1.mp1_V1.11_fih6737m.65.nj.n1_P39.2018_03_08
4. N_3_N_3_TA_1032_MT6737
[12:43:58] How
[12:43:21] Uninstall the inf drivers you installed on my pc.
[12:41:06] How to uninstall all mtk usb drivers without reinstalling windows? Mtk usb shows usb serial device in device manager
[12:35:02] 😭
[12:35:00] Help.
[12:34:51] === DongleManager [Infinity] v1.88 [13/02/2022 08:30:24] === Searching... Card-Reader: Generic EMV Smartcard Reader 0 HWID: 000007E023604082 Box/Dongle found: Infinity-Box/Dongle [CM2] Reading... Serial No (S/N): 4FD307E0 Firmware version: 0152.02 === Started: 13/02/2022 08:30:26 === Connecting to server... Connection successfully established Checking DongleManager version... DongleManager is up-to-date Checking Dongle Identification... Authenticating on server... Authentication stage error: Server answer:
[12:29:57] Hello guys I need your help hct 2PST100 frp please
[12:28:31] Help Nokia TA-1032 files please.
[12:19:14] Without logs how can we know what operation you did?
[12:10:25] Your words gives ZERO information.
I want to see software log text.

Copy here software log text this way https://forum.infinity-box.com/viewtopic.php?t=1828
[12:09:12] Has done unlocked but not unlock
[12:09:06] Make this https://infinity-box.com/?r=100155
[12:08:16] run CM2SP2.exe and try to connect phone
post software log text
[12:07:24] Let\'s try first and then we will see
[12:07:06] Helpe team
[12:04:53] Username: 034297527B
Reset password here - https://infinity-box.com/?r=17

This account has no credits. It has almost zero use case without the dongle.
[12:02:44] Do you know your dongle S/N?
[11:59:55] Copy and send error log here
[11:58:41] Hi tecno pr651h frp always fail with custom fdl rsa authentication failed. I\'m using username and password from dongle manager
[11:58:25] Is the imei intact?
[11:43:44] Welcome to infinity box feedback and support group.
[11:43:36] You are welcome
[11:43:16] Reset Infinity Account password here - https://infinity-box.com/?r=17
[11:31:13] Salom i am in here new
[11:30:04] I am in here new
[11:29:48] Salom
[10:38:40] good, you see correct to post that software, this is a group of Infinity dongle, sir
[10:36:25] ,
[10:26:33] install cm2qualcm driver install the emergency driver
[10:24:26] ta-1206 network unlock?
[10:11:37] https://romadd.com/mtk-auth-bypass-tool/
[09:52:37] Good morning
[09:43:06] only on CM2SP2 / CM2MT2
[09:41:38] i try to format the PC but some errs
[09:41:04] Good morning all
[09:38:50] you will have viruses on the pc, normally it works for users
[09:30:07] i have done that but nothing
[09:28:19] depending on the security check local room or search for Raphael V2, there are many logs in the gsmhosting forum Infinity dongle section
[09:23:14] https://infinity-box.com/?r=100103
[09:22:01] Hi InfinityBox CM2MT2 Failed to open 😕☹️😔
[09:14:54] Iam waiting boss
[09:12:01] Frp problem
[09:07:49] good, what problem do you have with that model, if you gave more information
[09:07:22] I need help
[09:06:52] How to reset password vifone mobile via cm2?
[09:04:15] X 658b boot file please help me
[09:01:43] https://infinity-box.com/?r=100103
[08:43:08] Hi InfinityBox CM2MT2 Failed to open 😕☹️😔
[08:07:10] Help.
[08:06:33] Help.
[08:00:17] Send your IOS Username to seller https://infinity-box.com/buy/\r
\r
How to know Username https://infinity-box.com/service/
[08:00:17] I want credit how to buy
[07:59:35] Inbox me bro
[07:55:37] possible write imei a107f cm2mt2
[07:55:04] I want credit cm2
[07:47:32] AP_CHIP : MT6768
AP_SWTM : Tue Aug 4 00:10:35 CST 2020
AP_DSPP : merlin[gl]
AP_SWVR : alps-mp-q0.mp1.tc8sp2-V1.9.1_huaqin.q0mp1.k69v1.64_P51
MD_CHIP : MT6768
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.LR12A.R3.MP.V98.P57
MD_SWVR : HUAQIN_Q0MP1_MT6769_SP_HW
MD_HWVR : Unknown

IMEI[1] : FFFFFFFFFFFFFFF
IMEI[2] : FFFFFFFFFFFFFFF

IMEI[1] : 865858058130647
Item : update Failed! [ 0xFFFF ]
IMEI[2] : 865858058130654
Item : update Failed! [ 0xFFFF ]

Done!
Elapsed: 00:00:55

Reconnect Power/Cable!
[07:47:32] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000007
BROM : SecMode
[07:40:28] Cm2 mt2 cant open
[07:08:43] good, of all the models mentioned Samsung with mtk with bit3 and updated to the silent patch, both test point and brom Mode are disabled, only operations can be done through isp pinout and server
[07:08:00] Found 41 files itel, search limit is 20 files per server
1. Pritel_Pritel_P16_COOLSAND_SC6533G
2. Vanzo_MT6580_VANZO_C10_8.1.0_OUKITEL_C10_V4.0_20181101_O11019_wd359bf_CLEAN
3. Navitel_NAVITEL_T700_3G_NAVI_MT6580_7.0_K706A.N0.V10.8.CF_V07.2278_NRD90M_joyasz8321_tb_n
4. [07:07:50] Nothing found for itel p37

Make your search here @FlashFileSearchBot
[07:04:30] Cpu is spreadtrum 9820
[07:01:00] A127 or 125
[06:46:10] Ok, will do soon
[05:39:08] Write sn not picture 😂
[05:02:16] Icloud best price
5s to 13$
6/6+ = 21$
6s/6s+= 25$
7/7+ = 35$
8/8+= 44$
X = 54
[04:53:46] Try now bro same problem
[04:44:22] We can\'t remove frp on A12 anymore
[04:40:43] hi
I used to have a best nokia dongle, but I lost it. Can I get my account back without getting the dongle? But I activate the dongle with a Gmail account and almost my phone number. Is there a solution?
[04:37:43] Connect clk to ground and check making brom or not
[04:23:29] Just restart sw, no big problem sir.
[04:10:16] If anyone has any opinions, please try to share.
[04:08:22] can back to connect again whit testpoint
[04:08:09] make to kg : normal
[04:07:57] change rpmb
[04:07:55] only work on isp
[04:04:48] Now
[04:04:46] Test all
[04:03:23] samsung chang security
[04:02:44] if kg not lock can work anny tool
[04:02:16] plz try
[04:02:14] can t connect brom mode
[04:02:05] all testpoint close
[04:01:55] if kg status : lock
[04:01:42] A125F U2
A037F U1 build_VA1
A226B U3 build_UL1
[03:47:19] Yes, use a flashfile
[03:42:49] Untick firefly under settings, you are good to go
[02:38:42] Card-Reader: Generic EMV Smartcard Reader 0
HWID: 0007817910321292
Box/Dongle found: Infinity [BEST]
Serial No (S/N): 88868179
Firmware version: 0122.02
=> Online Service:
- Username: 0388868179
- Password: NOOPqrst please house how do I reset this password so that I can use it to log in to the server please me thanks
[00:54:11] Any chance to see full software log text here?
install https://desktop.telegram.org and copy text
[00:53:24] What model/base have you tried?
Log text?
[00:45:42] Post here full phone info

InfinityBoxTalks 2022-02-12

[23:43:43] I try but same problem
[23:43:32] Infinix 688c frp
[23:38:21] How to solve this error
[23:34:53] Ok
[23:01:56] Select another base/model instead of \"Tecno\" one-by-one
[21:37:05] User firefly option
[21:14:43] How to solve this error
[21:02:56] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Périphérique série USB (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : DBF4B5E7A8A960A65C8BF74906025E12
BROM : SecLevel :
[20:58:49] Help me
[20:58:45] Infinix 688 frp
[20:58:41] Is there need to tick forced Nvm update
[20:52:12] Still the same
[20:51:46] Any changes wit it\'s state?
[20:51:33] And what is with the phone now after flash?
[20:48:26] IMEI[1] : 359880989574526
IMEI[2] : 359880989746352
IMEI[3] : 867400020316638

SEC : SLS:0, SKS:0, SKV:4

NVMng : Backup Ok , 0x000C0CC8
NVMng : Init DST
NVMng : Rx2E : Wx2D
NVMng : NVM block updated!

Prepare target ...
Prepare Ok!

CODE : vbmeta_vendor.img
FSIMG : socko.img
UBOOT : u-boot-spl-16k-emmc-sign.bin
CODE : qogirl6_m3l_cm4.bin
ERASE : SYSDUMPDB
FSIMG : super.img
CODE : EXEC_KERNEL_IMAGE.bin
ERASE : TRANFS
ERASE : MISC
CODE : qogirl6_pubcp_AGCP_DSP.bin
CODE : vbmeta_product.img
ERASE :
[20:48:26] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Open : P681LM-F0615-11.0-OP-V037-20210830_1240_user.pac
VER : BP_R2.0.1
LEN : 5.16 GiB
CPU : P681LM
VER : P681LM-F0615-11.0-OP-V037-20210830_1240

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : P681LM
Product Model : itel P681LM
Product Name : P681LM
Patch Level : RP1A.201005.001
Display ID : P681LM-F0615-11.0-OP-V037-20210830
Ver. Incmt : OP-V037-20210830
Ver. CodeName :
[20:33:15] If yes tick update NVM and do job again
[20:32:08] Are u flashing with a higher version
[20:25:21] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Open : P681LM-F0615-11.0-OP-V037-20210830_1240_user.pac
VER : BP_R2.0.1
LEN : 5.16 GiB
CPU : P681LM
VER : P681LM-F0615-11.0-OP-V037-20210830_1240

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : P681LM
Product Model : itel P681LM
Product Name : P681LM
Patch Level : RP1A.201005.001
Display ID : P681LM-F0615-11.0-OP-V037-20210830
Ver. Incmt : OP-V037-20210830
Ver. CodeName :
[20:22:50] PLIS COMO REPAIR
[20:14:44] Let me repeat that it is good idea to post software log text for flash write operation.
https://forum.infinity-box.com/viewtopic.php?t=1828
[20:14:03] Work about more software features is in progress, new software will be released as soon as it will well tested.\r
\r
Please tell us list of required supported CPU types and functions
[20:14:03] Qualcomm update sir??
[20:09:14] When it died I used sp2 v2.11 axe.
[20:07:35] No I didn\'t. I had expired support before i flash killed it. Now I reactivated my infinity card hoping it is going to resurect it.
[19:59:53] Have u disconnect battery and plug back
[19:59:13] Did u backup before flash
[19:54:32] One day it will happen. Work is in progres.
[19:50:11] I captured this picture before flashing it
[19:47:21] what should l do if my dongle password says wrong
[19:45:19] I suggest you always copy/paste software log text for the operation
https://forum.infinity-box.com/viewtopic.php?t=1828
[19:43:45] Ah, ok :)
Pleae in future write probelm honestly from the begining like that: I flash the same version file from easy firmware and it died,
[19:42:54] Remove battery hold power key 10secs n reconnect it
[19:42:03] thank you
[19:41:57] it updated
[19:41:50] It had v037 before flash, I flash the same version file from easy firmware and it died, flashed v041 file from easy firmware, still dead. Today I flashed v037 from infinity suport still same problem
[19:41:43] Just connect dongle to PC, that\'s all
Try now
[19:41:21] You DO NOT need to install any drivers for smart-card for Win10
Just connect dongle to USB port and it will work
[19:41:12] I’m saying it’s better to have the loader rather than downloading the entire firmware just to remove frp
[19:40:28] Found 1 file p681lm
1. iTel_P681LM_F0615_11.0_OP_V037_20210830

Make your search here @FlashFileSearchBot
[19:39:28] Happened if the boot didn’t succeed, disconnect battery and put it back
[19:39:24] is there anything else l can do except changing to 32bit
[19:38:49] It works too
[19:37:46] How about pack file instead?
Download it from Infinity server
[19:37:19] FRP
[19:35:53] Send me the cm2 boot file of it and I’ll send you the highest version firmware link for it
[19:35:18] If you forward to me the p681lm.fg I can try sending you a link to higher ver
[19:34:38] What was the problem with the phone BEFORE flash?
[19:33:35] Flashed itel P37pro P681LM using file from infinity suport and it died(not powering on). Where am I going wrong or the problem is on the file?
[19:08:48] Follow log instructions
[19:07:18] Do you know what is the cpu type for Tecno 920D?
[19:02:02] Operation : Repair Security [ v2.33 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 31BE8B5081ACC5391095C2610334466C
BROM : SecLevel : 0x00000001
BROM : SecMod
[18:53:05] possible write imei a107f cm2mt2
[18:51:50] Use cm2
[18:51:36] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 31BE8B5081ACC5391095C2610334466C
BROM : SecLevel : 0x00000001
BROM : SecMode : S
[18:43:31] How
To
Unlock tecno 920D nertwokkey
[18:37:03] install mtk bootpack
[18:35:55] Try these
[18:25:22] Your Infinity Account is blocked.
You posted password for public use, it was stupid idea.
Ig you want to get your account unblocked you must contact to support via e-mail
Good luck!
[18:25:06] Product Model : 5009D
Product Brand : TCL
Product Name : 5009D
Build Time : 22.08.1970
Product Device : U5A_PLUS_3G
Product Manfct : TCL
Board Platform : mt6580
Product Info : Alcatel 1C
[18:23:16] Yes, you are right. This task with desktop application is overskill. No need for now.
Just leave it my friend, your dongle already updated to latest version.
use it now
[18:22:19] Please send precise model of device
[18:18:02] install https://desktop.telegram.org and copy text
[18:16:50] Ok, I can wait
[18:13:25] I don\'t know how do you want to help me?
[18:11:53] Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 31BE8B5081ACC5391095C2610334466C
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BROM|BL : 0x05|0xFE
B
[18:10:56] Make this https://infinity-box.com/?r=100155
[18:08:35] I am blind
give me text if you want to get help
[18:08:19] Use this in cm2mtk2
[18:08:11] Your dongle is well working and it has latest firmware version 0152
Do not update it again please
[18:06:35] Ok
You may try with another base or DA file
[18:05:47] Tell me 8 symbols ot TEXT butn not megabytes of images please
[18:05:08] What is the dongle S/N?
[17:57:56] Operation : Identify [ v2.33 ]

Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 31BE8B5081ACC5391095C2610334466C
BROM : SecLevel : 0x00000001
BROM : SecMode : SB
[17:55:20] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 31BE8B5081ACC5391095C2610334466C
BROM : SecLevel : 0x00000001
BROM : SecMode : S
[17:45:50] Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Selec
[17:39:28] Anothe mode/base should be selected.
Also you may try with CM2MTK but not wth CM2MT2 for this CPU
[17:34:21] Also you may try this as a first step https://infinity-box.com/?r=100155
[17:31:47] Diag on spd
[17:30:11] Found 13 files Tecno la7
1. Tecno_LA7_H393A_O_200818V260
2. Tecno_LA7_H393A_O_200229V252
3. Tecno_NVM_Tecno_LA7Pro_MT6739_eMMC
4. Tecno_NVM_Tecno_LA7_nvram
5. Tecno
[17:27:41] If you have dongle connected see this for drivers https://infinity-box.com/support/?s=2
[17:26:57] Do you have Infinity CM2 dongle connected to PC?
[17:25:48] In some cases yes in some cases no, pls see link with reports
[17:25:30] No guarantee but you can try.
We are collecting info, pls report your case https://infinity-box.com/?r=100169
[17:17:07] Smart reset can preserve data?
[17:17:00] 🙏🙏🙏I will thank you very much
[17:16:17] offcourse
[17:16:10] yes
[17:16:01] you will help me
[17:14:09] how can i end this problem
[17:14:08] i will come home for about 1-2h and will knock you
[17:13:30] i have it on my PC
[17:13:27] I need to format mtk phones without lost data possible with infinity cm2
[17:12:52] Hi
[17:12:17] how do i get it or can you use it
[17:10:00] Flash signed firmware
[17:09:55] good, in the same message it says or you do not have the dongle connected or the drivers are not installed
[17:09:07] Or driver
[17:09:01] Your card reader is Ok..?
[17:08:57] install correct driver
[16:59:36] See here @sahil2000ind
[16:58:14] Tecno La7 No command problem solve pls house
[16:57:45] Someones tried to change imei by Eng firmware method then failed, now even i flash Eng firmware, erase nvdata and nvram, repair imei by Modem META then flash stock firmware but no network..
When i write imei in Eng firm state imei will appear but after write full firmware imei gone and only serial is there
[16:50:49] https://infinity-box.com/?r=100103
[16:31:29] Please help me my MT2.33 open and close
[16:29:46] Operation : Memory Tool Init [ v2.33 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 31BE8B5081ACC5391095C2610334466C
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BRO
[16:20:19] What\'s the problem in phone?
[15:56:17] https://youtu.be/hkwWDTSgTaM
[15:52:54] Fix PC step-by-step https://infinity-box.com/?r=100103
[15:39:33] Hello team cm2mt2 v2.33 not open ??
[15:26:43] Ok, I\'ll try to test this phone. But I think software is Ok but need to select correct loader/settings.
Anyway if you was able to fix your phone somehow - it\'s good
[15:25:46] Ask any seller here https://infinity-box.com/buy/
Send your Infinity Account username to seller
Do you know your Username?
[15:22:24] Frp any help
[15:15:22] Your from
[15:12:50] Please any samsung A205f frp can cm2 support
[15:04:48] Which methods of you try?
[15:03:02] Mdm permanent tecno Comon 18p
[14:57:47] thank you$
[14:48:08] watch the video there you have a solution to your problem
[14:47:52] watch the video there you have a solution to your problem
[14:46:59] Try this for qualcomm drivers https://www.youtube.com/watch?v=S5zXrVwMbQM
[14:45:52] from Infinity support section drivers and downloads from qualcomm
[14:44:46] what the version installe
[14:43:25] good, check what drivers you have installed and you will have to install the Infinity qualcomm drivers
[14:42:55] in MIRACLE BOX run
[14:42:35] I\'m installed driver QLM
[14:42:10] u need driver
[14:41:42] don\'t identify in EDL
[14:00:52] Please tell me firmware versions.
I want to know what versions was atready tested and what was the result after each flashed version.
[13:17:04] All failed but other tool don+repair all don pls add on next update tecno ch6
[12:59:04] Need cm2 credit
[12:42:58] Gentlemen, there is a lot of information on google, forums, etc. Do some research, thank you very much.
In the gsmhosting infinity dongle forum section there are countless logs of users who have reported fixes.

BR
[12:40:48] https://www.youtube.com/watch?v=0Nm9ehLN_6A&t=1s
[12:38:44] https://www.youtube.com/watch?v=qlgIVovQXXc
[12:06:54] Redmi Note 9 (Merlin) MT6768 no imei after Eng firmware, any help?
[12:04:52] Good news
[12:02:23] The same version i rode from another phone
[12:02:07] Ok
[12:01:25] Select other base/model and try one by one
[11:57:58] Cm2mt2 bro
[11:56:57] 🤦‍♂️🤦‍♂️
[11:55:04] Ok
[11:53:19] It looks like it\'s MTK device.
run CM2MT2.exe then click to IDENTIFY button and connect cable.
copy/paste here text
[11:52:14] run CM2MT2.exe then click to IDENTIFY button and connect cable
copy/paste here text
[11:50:06] Sir frp tecno cammon 18?
[11:46:35] Try to use sp unlock function on cm2mt2
[11:46:07] MT6761
[11:43:14] Chipset?
[11:42:57] Network lock
[11:42:40] Network or password
[11:40:01] Hi pls help me on ZTE Z5156cc unlock
[11:35:12] Type: Infinity-Box/Dongle [CM2]
S/N: 0522D6E4
Username: 000522D6E4
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0151; Expired: 08-Jan-2022

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period
[11:34:59] it\'s different security types, different methods are used to handle it.
[11:32:42] Ok, we will think about that
[11:10:33] Reset done but data lost. Right?
[11:01:51] not working on tecno
[10:57:12] Use 2.33
Smart reset safe for oppo vivo only
[10:55:29] PTFN : MediaTek PreLoader USB VCOM (Android) (COM21)
MODE : PRELOADER PORT
PORT : 21
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2044 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
A
[10:55:29] PTFN : MediaTek PreLoader USB VCOM (Android) (COM21)
MODE : PRELOADER PORT
PORT : 21
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2044 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
A
[10:55:28] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM21)
MODE : PRELOADER PORT
PORT : 21
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM
[10:55:28] Load IDBase v1121431 Ok!

UserName and/or Password not set! Can\'t continue!

Load IDBase v1121431 Ok!

Operation : Identify [ v2.32 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM21)
MODE : PRELOADER PORT
PORT : 21
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 ,
[10:50:25] which option to do
[10:03:31] I thought SEC : SLS:1, SKS SKV: 5 and SEC : SLS:2, SKS SKV: 4 are different if i\'m right?
[09:17:41] 000522D6E4 that\'s my S/N
[09:14:39] 😂😂
[09:14:35] 😊
[09:13:22] 000522D6E4
[08:59:37] Team can you please fix the issue on credits mobicel glo,mobicel rio ss,mobicel star SP UNLOCK cant tack 5 credits same as NOKIA C20,C10 please at least (1or 2 )credits for thes mobicel GLO,Rio,Star,beam its just an suggestion?
[08:09:00] 😔😔🤷‍♂🤷‍♂🤷🏾‍♂🤷🏾‍♂
[08:08:55] I think cm2 is all about spd and mtk
[08:08:38] God knws
[07:52:49] Hi When do you update Qualcomm plz
[07:48:29] Thanks..
[07:47:50] u can try
[07:47:39] For Unlock Bootloader
[07:47:21] Hello Sir...Dimensity 810 5G Support?
[07:30:09] Connect and try bro
[07:24:55] A509DL posible to unlock by infinity
[06:57:08] diag mode not work
[06:56:33] Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
[06:31:19] Its solved
Just charge battery
[06:08:14] Not Supported
[06:07:53] Realme C11 imei repair supported?
[06:04:34] so not supported for now
[06:04:29] Moto require some kind of auth
[04:27:17] Try identify first in diag mode
[03:05:59] i try all .pac file for fdl boot not work
[03:03:09] xt2097-14
[03:02:49] moto e7i power
[02:52:00] this file for ?
[02:15:31] realme rmx2020 c3 unlock network!!

InfinityBoxTalks 2022-02-11

[23:40:06] It IS MTk ?
[23:32:19] Alliance solution
[23:24:50] How to solution cm2
[23:24:36] Samsung A032f frp
[23:07:56] From date I join here infinity team is Fast support , Many Thanks professional team ❤️
[23:07:35] Thanks
[23:07:01] yes, you can.
support time just will be added
[23:06:41] https://infinity-box.com/buy/?ac=2
[23:06:23] If my dongle has not expired yet, can I renew it or should I wait until it expires to do so?
[23:06:18] See lines 6. and 7. here https://infinity-box.com/price/
[23:05:37] I wish to know how much it may cost me
[23:04:49] Nigeria
[23:04:41] Contact to any seller https://infinity-box.com/buy/
Send your dongle S/N to seller and order
Infinity-Box/Dongle [CM2] 1 year support renew
or
Infinity-Box/Dongle [CM2] 2 years support renew
[23:03:32] Renew
[23:03:24] What is your country?
[23:02:08] My cm2 dongle is outdated
[22:27:14] Ok
[22:20:03] Plus support huawei id remove for MTK
[22:02:26] No guarantee but you can try.
We are collecting info, pls report your case https://infinity-box.com/?r=100169
[20:40:21] https://youtu.be/lzWYR5VtMoc
[20:37:57] possible to remove tecno LD7j screen lock without lost data
[20:31:25] Good job
[20:19:34] At support server we have one file only V08
[20:19:21] What firmware versions did you try?
[20:17:50] Yes, but nothing..
Even format and flash also no way
[19:42:59] Download SPD driver\'s here
https://dl2.infinity-box.com/00/pub/?dir=/software/archive/CM2/
[19:42:37] Install UNISOC driver\'s too
[19:38:14] It\'s driver problem uninstall all SPD driver\'s and restart PC then download from cm2 server and install then enjoy
[19:30:07] I have solution
[18:46:03] Make sure your Username and password is the same with your online server
[18:44:02] Set at broom only not B+P and hold vulume up
[18:39:24] Hello, why don\'t you write in English?
[18:37:44] Some to me
[18:35:15] Ok
[18:34:59] No😢
[18:20:45] Solved?
[18:19:43] That message has no relation to network. I guess it\'s flash chip fault.
[18:08:56] My lap top every time conect in net
[18:08:56] Already conected bro
[18:01:47] ??
[17:58:44] A125m
[17:58:36] model
[17:58:30] odel
[17:55:18] Reinicio constante despues de esto
[17:53:03] A12 ??
[17:28:41] Format and Write file
[17:26:06] Connect the system with Internet
[17:25:44] 🆗 👍
[17:23:55] Must select 0_Base and select Local SLA.
Connect using both volumes +/- will be ok.
[17:23:07] Infinity is the best
[17:20:34] The world is full of work and effort
[17:19:49] Sure, sooner or later you will get it.
[17:16:03] Noice now gib test builds
[17:12:05] As we told earlier, this software unit is under rebuilding at the moment.
Step-by-step, my friend
[17:11:30] work, work
And we live in little bit free world. At least you can use one tool for MTK & SPD and something else for other platforms.
[17:10:15] Quallcom most recently 2017😂
[17:08:13] Old quallcom not work
[17:07:08] А так, самому интересно естественно
[17:06:43] О, русские! Наконец могу выкинуть свой .tr en и общаться. В общем, я делаю прошивки если деньги есть на сервера. 70% денег с донатов идёт на сервера
[17:04:56] CM2QLM.exe
more to come
[17:04:30] Please add qualcom phones
[16:43:52] https://youtu.be/NTvRDFX1w0w
[16:25:13] something goes wrong with several 9A variants. No solution at the moment. Developers know about it and trying to fix
[16:08:15] Redmi 9a
[15:51:30] see here how to reset password that you forgot https://infinity-box.com/service/
[15:50:40] YES
[15:48:28] Failing to login to IOS using details extracted from dongle manager. Help please
[15:44:57] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r

[15:44:57] Do you mean update dongle firmware or do you want to renew support?
[15:44:08] if you can flash well other phones with the same files and the same config it means that your 10-11 phones has emmc problem or something like that
[15:44:07] I want to update my cm2 dongle
[15:43:07] Good evening here I\'m new
[15:41:22] Only 10 to 11 phon same error
[15:40:42] Is it Ok?
[15:38:48] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : P681LM-F0615-11.0-OP-V037-20210830_1240_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kic
[15:38:37] try this security code: 8787
[15:38:17] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : P681LM-F0615-11.0-OP-V037-20210830_1240_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL :
[15:34:51] Tomorow
[15:32:42] Cm2 can work?
[15:31:45] https://forum.infinity-box.com/viewtopic.php?t=1828
[15:30:04] I forgot copy log
[15:28:26] log text?
[15:24:32] My problem is when i want start flashing phone can connect to pc but stuck on step two connection
( exbl status alive usb load active)
[15:23:08] try flash mode
[15:19:08] Virus
[15:17:40] Wow
Донатят, или просто интерес?
[15:16:43] Activition 1yy and 2 yy how much
[15:15:41] redmi note 10 5g camellia how to change resistor ?
[15:11:26] Do you have the same error with all phones?
[15:10:20] What is you dongle S/N?
[15:09:58] What is the problem? You have nice image
[15:09:57] I have 2 file I will try but sam error I have 42 phon
[15:09:35] Stock logo
[15:09:08] Yes
[15:08:44] Bro i have problem😁
[14:55:08] https://forum.gsmhosting.com/vbb/f296/nokia-225-4g-ta-1289-security-code-3004636/
Already posted to forum
Plz help me😐
[14:45:39] https://forum.gsmhosting.com/vbb/f296/ums9117-ta-1279-nokia-225-4g-2971821/
I see this post
[14:44:40] And stiil not open mt2 2.33 and sp2 2.14
[14:43:33] Need help from infinity team
I have one Nokia ta-1289
Pr doo security code
Scr module indentify sucuess
And sp2 also
But format failed
Can you unlock my nvm
Security code
[14:40:24] Hi dear
Nokia 108 orginal cable is damaged i fix a cable like below image for flashing best dongle. But stuck on

EXBL STATUS : ALIVE USB LOAD ACTIVE
[14:33:40] Tecno Spark 7P

\\CM2MT2\\CM2MT2.exe MT6768
https://infinity-box.com/?b=26#26
[14:32:09] Tecno spark7p frp cm2 can do it?
[14:24:54] Just checked. There is no your name there ;)
Hidden developer?
[14:12:47] No idea. Reboot PC and try again
Also try with another USB port.
result?
[14:11:52] Make this https://infinity-box.com/?r=100155
[14:11:06] Plz help
[14:10:41] What\'s problem plz help mtk tool not opening
[14:05:17] Have you tried to flash it with different firmware versions?
[14:03:59] good sir, so that it is of great help and there is good feedback, apart from explaining your problem, expand with more information, complete log of the operation, screenshots, it does not cost anything and the help or support will be much better and faster , thank you
[14:03:46] so try to use another cable, another USB port and finally another PC
Another way - fix your PC
remove old drivers, install new drivers well
[13:59:37] i do it not work brother
[13:59:28] Just use default settings, in most cases it works.
If boot fails you should select another model/base
[13:58:28] What is your dongle S/N?
[13:54:26] work, work

reboot PC and try again.
[13:53:36] What is the problem?
[13:53:26] post software log text
[13:46:16] vivo v21e 5g frp problem plz help
[13:45:50] More nokias are flooding the market, patiently waiting for infinity best 2 upate...
[13:44:12] Available bro
[13:43:26] A325F U2 MDM file needed
[13:41:43] Off antivirus bro
[13:41:22] Install driver mtk and sp driver from support bro
[13:35:56] problem with all phone or particular only with 1 or 2 phones?
[13:28:02] yes, things goes forward
[13:24:31] What is the dongle S/N?
[13:22:39] Make this to fix misconfig https://infinity-box.com/?r=100155
[13:22:23] gyroscope failure?
[13:21:17] work, work

qcommtk_3.0.7
[13:19:39] What is the problem with the phone? Stuck at boot stage?
[13:15:24] what was problem in phone?
[13:01:49] after vivo s1 or y17 odels smart reset again this probelm
[12:42:30] Found 1 file Kg7h
1. Tecno_KG7h_H6511CDEF_R_OP_211105V255

You can also try:
1. Alpha Kane files collection
2. firmwarefile
3. needrombd
4. androidxda
5. xdafirmware
6. androiddatahost
7. testedflashfiles
8. romadd

Channel - Group Chat
[12:40:50] tnx
[12:40:33] Yes
[12:38:48] Pls link
[12:33:04] Drivers_MTK_v2.0.1.1.7z driver OK?
[12:26:43] ok
[12:26:09] Install drivers for start.
[12:26:06] When I start working very slowly
[12:25:36] You can try, I don\'t think you will make something wrong because phone can\'t power-on now
[12:25:14] On support. All drivers on support.
[12:23:11] boot system
[12:23:03] Ufi security?
[12:21:33] I use win 11 works fine
[12:20:39] Recommended Windows 10 or 7
[12:19:28] 😕
[12:19:09] new windows 11
[12:18:56] Ufi security problem
[12:14:34] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Read Firmware [ v2.33 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : USB Serial Device (COM16)
MODE : BOOTROM
PORT : 16
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!

[12:12:07] Infinity Windows 11 ready program OK?
[11:52:48] same problem my a50 anyone help
[11:51:20] https://youtu.be/pr-c0HE2r5k
[11:41:26] which driver i dnt have
[11:39:30] Enable UK OFF via dongle manager.
Create UK.off empty file , put in SP2 folder. Restart SP2. Done.
[11:38:36] No
[11:38:29] Install drivers
[11:36:33] meta mode driver not detect
[11:36:32] ???
[11:35:56] Can i unlock Infinix x693 pin lock with no Data lost
[11:33:33] I need help I want to change imei with cm2sp2
[11:31:53] Just restart SW and repeat. If still same - reinstall MT2. Reboot PC. Try once, restart sw again. Now all will work.
[11:30:49] Card found : 4B1E57BB , v0152
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand : Lenovo
Device Manufact.: LENOVO
Device Model : K33
Device CPU : MSM8937
Device IntName : karate
Device Version : 7.0
CU_SWVer : LENOVO
Device Compile : 6/10/2017 4:05:28 AM
Device Project : K33_USR_S223_1706101140_Q00440_ROW
Device ExtInfo : Lenovo K33
Load Ok!

Operation : Flash [ v1.16 ]
ForceFlashing
[11:30:46] I need help I want to change imei on cm2sp2
[11:30:11] Yes problem Fix. Video loading.. 🤌
[11:29:03] Try this for qualcomm drivers https://www.youtube.com/watch?v=S5zXrVwMbQM
[11:28:04] it\'s Snapdragon 450
you can try to connect with CM2QLM but Im nit sure. Try and see
[11:15:53] 10
[11:15:36] android
[11:15:13] Use and test cm2mt2 bro
[11:12:48] Redmi note 9 5g
Remov lock screen
Without deleting his information
Can anyone do this for me?
CPU-MTK
[11:11:36] Chipset?
[11:11:14] Sharp s5-sh
[11:10:50] Any one here who can help me to unlock network
[11:10:03] Hello
[11:08:11] https://themagictool.net/
[11:06:50] do as per instructions displayed
[11:05:54] Windows 10 CM2 Qualcom driver problem
[10:41:15] Nokia ta 1365 firmware
[10:37:05] than run my phone ?
[10:36:45] if i write firmware
[10:36:32] STORAGE : RPMB Status : eMMC : RPMB KEY PROGRAMMED [UNUSABLE]
[10:29:12] tried your loader but didnt work
[09:54:59] Type: Infinity-Box/Dongle [CM2]
S/N: 5B733466
Username: 005B733466
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0152; Expired: 08-Feb-2023

[09:19:30] https://youtu.be/7oBbZZ8GvaU
[09:16:18] this model there are many logs and post in the gsmhosting forum
[08:49:38] Check version.. There are some different versions in this perticular phone
[08:08:06] Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : PR652B
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[08:04:05] Wrong boot selection
[08:03:25] Select another boot fily
[08:02:35] What\'s the issue?
[07:47:42] Device Connected!
BootVersion : SPRD3
Boot : PAC : nfinix_PR652B .pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[07:47:32] Infinix PR652B when flashing with CM2 ..SP2 I get this error
[07:30:46] good gentlemen Samsung has patched the manual method of alliance.apk, the same has been patched through another silent test point as well as brom Mode Samsung mtk
[07:30:12] señores Samsung ha parchado buen método manual de alliance.apk, lo mismo ha parchado mediante otra silenciosa el tanto test point como brom Mode Samsung mtk
[07:28:50] maybe cm2 dongle have solution.
[07:27:45] here infinity group plz don\'t send any spam
[07:27:02] this is a127f u7 android 11 I\'m going to remove frp. when i click on restore data it says (something went wrong) anyone found solution?
[07:26:09] Found 11 files Tecno bb2
1. Tecno_BB2_VP572DE_QGo_OP_211011V012
2. Tecno_MT6580_TECNO_MOBILE_LIMITED_TECNO_BB2_8.1.0_BB2_VP572ABC_O_GO_210308V16_O11019_k80_bsp
3. Tecno_BB2_VP572ABC_O_GO_210922V19
4. Tecno_BB2_VP572DE_QGo_OP_210812V011
5. Tecno_MT6580_TECNO_MOBILE_LIMITED_TECNO_BB2_8.1.0_BB2_VP572ABC_O_GO_200608V9_O11019_k80_bsp
6. Tecno_NVM_Tecno_BB2_nvram
7. Tecno_NVM_Tecno_BB2_16+1A_NVRAM
8. Tecno_BB2_VP572ABC_O_GO_210308V16_MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V212_2_P5_1_wg_n
9. Tecno_BB2_VP572ABC_O_GO_2
[07:24:39] Found 11 files Tecno bb2
1. Tecno_BB2_VP572DE_QGo_OP_211011V012
2. Tecno_MT6580_TECNO_MOBILE_LIMITED_TECNO_BB2_8.1.0_BB2_VP572ABC_O_GO_210308V16_O11019_k80_bsp
3. Tecno_BB2_VP572ABC_O_GO_210922V19
4. Tecno_BB2_VP572DE_QGo_OP_210812V011
5. Tecno_MT6580_TECNO_MOBILE_LIMITED_TECNO_BB2_8.1.0_BB2_VP572ABC_O_GO_200608V9_O11019_k80_bsp
6. Tecno_NVM_Tecno_BB2_nvram
7. Tecno_NVM_Tecno_BB2_16+1A_NVRAM
8. Tecno_BB2_VP572ABC_O_GO_210308V16_MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V212_2_P5_1_wg_n
9. Tecno_BB2_VP572ABC_O_GO_2
[07:18:38] Tecno bb2 firmware
[07:18:13] thansk you dada
[06:59:50] but no proper solution
[06:59:41] already posted in forum section long time ago
[06:59:22] logs?
[06:59:09] please fix 5g cpu
[06:59:02] OPPO CPH2321 and VIVOy73
[06:58:51] and some 5g phone dead after smart reset boot
[06:58:19] equal to
[06:57:35] fix mi 9a smart reset error
[06:16:16] Mi note 10 pro max security repair
[06:14:13] Good chance!!
[06:12:08] Thanks
[06:12:02] Thanks very much.
[06:09:36] It\'s in d boot files. Click on Tecno and u will see it
[06:09:34] Found 4 files infinix Pr 652b
1. Infinix_PR652B_F6317_11.0_OP_V049_20211102
2. Infinix_PR652B_sc9863a1h10
3. Infinix_PR652B_F6317KE_11.0_KE_V004_20210901
4. Infinix_PR652B_F6317_11.0_OP_V048_20211025

You can also try:
1. Alpha Kane files collection
2. firmwarefile
3. needrombd
4. androidxda
5. xdafirmware
6. androiddatahost
7. testedflashfiles
8. romadd

Channel - Group Chat
[06:07:51] Help pac file for infinix Pr 652b
[06:07:40] Flashing most of times doesn\'t need boot file for many softwares like nck , I don\'t know about cm2!
[06:06:47] Ohk
[06:06:07] Am also having the same problem, what\'s the solution?
[06:04:39] Boot is something important in spd devices, it gives good and correct results
[06:04:20] He doesn\'t want to show me how he does it and he does not connect to network.
[06:03:35] I am so sory. It\'s because someone I know here does his own without selecting boot file using cm2 sp2
[06:02:09] Why are you lazy?
[06:00:31] Please how do I use cm2 sp2 to flash devices without selecting boot file differentlly?
[05:53:56] This is no mistake, I will make a video on how to fix it today.
But the video will only be released here in the group.
[05:43:41] Thanx u new update fail to protocol hint fix ❤️
[05:27:56] Sorry and Forgive! We love this forum, is very important sir 🙏
[05:19:30] sorry
[05:19:14] Sorry.
[05:18:50] u r part too now
[05:18:41] Hamm ok👌
[05:18:32] use alliance

It will give you access to enable adb so.
[05:16:52] will remove them today
[05:16:42] not you
i can see still some users doing out of group discussion
[05:16:30] In my case, there is no downgrade since that Samsung sm-a127m mobile has its Android version 11, there is no minor, even looking for the oldest release dates, they all have the same patch date.
[05:16:23] What was it friend did I do something wrong?
[05:15:52] 🤔🤔
[05:15:35] 😡
[05:14:59] Dongle expired.
[05:14:39] It works if you don\'t know how to use it.
[05:14:12] Type: Infinity-Box/Dongle [CM2]
S/N: FAF93239
Username: 00FAF93239
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0151; Expired: 26-Jan-2022

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period
[05:13:47] Solution is to downgrade security Patch
[05:13:20] Alliace shield not working in latest security
[05:12:36] Check support period, i think is expired
[05:12:28] Use alliance shield.
[05:11:41] Nice info
[05:11:25] Ok
[05:11:02] I always use Easy Firmware and Z3x to download Samsung firmware so till i visit site i will let you know
[04:55:24] Plz soution
[04:55:16] Plz not update
[04:54:31] Do you have link for A217F u6 to Android 10
[04:53:13] You can\'t downgrade binary, but i think have previous firmware
[04:51:28] Pedro Jose and Nass Escobar
[04:51:22] Okey
[04:51:06] not with me
you guys each other
[04:50:50] Si yo puedo hacer el trabajo con versión alta o baja el problema es cuando me llega una actualización nueva vía. Ota este si le instalo daña el parche o si actualizo mediante herramientas
[04:50:44] Hard to enter your inbox as you\'re admin sir 😃
[04:50:21] Downgrade not available
[04:48:56] Downgrade android version if available firmware then do Job
[04:48:49] you can use inbox for discussion
[04:46:51] Interesting I have a redmi note 9 Merlin which I have patched but when updating this boot the patch can modify that patch so that it remains official when updating it does not damage the work friend grac
[04:44:12] Im developer custom roms for Redmi 9/Redmi Note 9/Redmi 10/Poco F2. Official maintainer of Cherish OS.
[04:43:29] Intento degradar pero no hay mucha opción su firmware en Android es 11 no hay degrade
[04:43:10] Here is morning sir 😃... 07:43
[04:42:05] and I open my Samsung account and then update. I try to restore the alliance x application but impossible, it throws me an error and does not leave
[04:41:55] What about Safaricom Neon Ray from v05 and above \"Forever Locked\" problem? I have two set in hand and i tried all ways without success!
Mostly this problem occured after tried to unlock with NCK
[04:41:13] good evening someone please help me I have a Samsung sm-a127m bit3 Android 11 security August 1, 2021. which. I have tried to do frp but impossible I can access the browser
[04:40:58] Just format it in diag mode
[04:36:49] Will do
[04:31:55] This is the common problem for this phone... Just download firmware and flash with cm2sp2
[04:00:17] Yes sir
[03:59:42] test point in flash mode need to servie this model
[03:48:58] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM17)
MODE : PRELOADER PORT
PORT : 17
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT6771
AP_SWTM : Tue Apr 6 18:14:49 CST 2021
AP_SWVR : CPH1823_11_F.18_210406_cc65c34e

Format Failed : UserData


Done!
Elapsed: 00:00:44

Reconnect Power/Cable!
[03:34:45] if erase nvram ok..but now show imei..
[00:26:06] Click here @FlashFileSearchBot and type there phone name. You will get links

InfinityBoxTalks 2022-02-10

[22:44:37] it is very easy to make the custom loader in pac format
[22:08:57] Yes
[22:06:56] Found 8 files spark 7
1. Tecno_KC6_Tecno_Spark_4Air_MT6761_ANDR9_KC6_H6114I_P_RU_191007V65_PPR1.180610.011_kc6_h6114
2. Lava_Spark_245_S207_20130704
3. Lava_Spark_265_S109_20130719
4. Lava_Spark_283_S107_20131017
5. [22:05:37] I can have the tecno spark 7 spd boots at your place
[22:03:29] yes, monitoring the situation
[22:02:29] but infinity can still do the boot update
[21:59:46] but it is that the technical assumptions of today, they want the magic button in the software that does everything and they do it without getting overheated and that\'s how things don\'t work, they are very badly used to it, driver problems, they don\'t know how to distinguish between different connection protocols depending on processor and a long etc
[21:57:51] Yes
[21:56:40] it all depends on the security brands you want to add, customize them, but if you\'re right there will be surprises, you only have to see the comments in groups, there is no alarm in the forums yet, wait and see
[21:54:22] let\'s see
[21:53:35] exact step by step
[21:53:14] it looks like latest mtk cpu releases will give some surprices too
[21:53:07] Ok
[21:52:22] step-by-step
[21:46:58] but he reassures us that he will do it anyway
[21:44:43] apart infinity team does not copy and paste like other solutions or software on the gsm market
[21:43:59] You think that programming and developing solutions is very easy and I can assure you that it is not.
[21:43:12] They will notify or announce in the gsmhosting forum when there are updates
[21:41:15] and why infinity does not update qualcomm
[21:40:37] Hello I know I know
[21:38:35] and why infinity does not update qualcomm
[21:36:50] I speak for example of xiaomi with qualcomm processor
[21:36:11] I mean the boot process, communication between the loader with the host and that it be validated so that there is communication, what functions each partition does, etc etc etc
[21:32:57] do you mean boot process or anything else?
[21:32:24] I mean that the securities in qualcomm and exynos processors for example are stronger than in mtk processors, that\'s what I mean
[21:31:00] Thank you very much for your interest
[21:30:41] > is a joke
What do you mean?
[21:29:29] xiaomi is coming strong with miui 13 especially xiaomi with qualcomm processor, on the other hand mtk security is a joke
[21:29:03] if you have your own separate tool ready we can think about some kind of cooperation, f.e. sell your tool via our web or any other way.
think about it and contact me anytime
[21:27:38] Any example of your software/tools?
In fact we sell different tools via our web https://infinity-box.com/price/
so why not yours
[21:27:06] We already have a solution to samsungs with mtk processors that overcame brom mode, for example, new methods to bypass xiaomi and root many xiaomi through isp pinout, those are some examples.
[21:25:04] Small developer
[21:24:57] Im developer too. In 14....
[21:23:46] No serious reason.
It\'s always interesting to know what software other people create
[21:22:34] yes and developer, why?
[21:17:16] Thanks!
Are you programer?
[21:04:12] Hello again, I\'ll add more
[21:02:52] fase reset can not be done for this device
try another reset option but user data will be lost
[20:48:56] copy software log text
[20:46:02] and for option Smart reset data sefe for me does not work
[20:44:42] thank you i see now
[20:40:55] Yes
[20:40:12] CM2MT2.exe v2.33
right?
[20:36:53] KG state process https://forum.infinity-box.com/viewtopic.php?t=3949
[20:36:34] how i can make samsung KG show on my infinity
[20:35:12] Thank you sir
[20:34:08] It will be resetted anyway, but user data may be lost
[20:32:59] Thanks, no need to upload, I\'ll get it here and move to support
[20:13:29] I mean for other phones like infinix ,tecno and itel
[20:11:10] how to make my tool also show samsung module
[20:10:11] how to make my tool also show samsung module
[20:03:31] Good, I upload it to infinity support?
[20:02:58] That means if the model is not supported it won\'t be done right?
[19:51:26] MT6276 should be Ok.
Example is here https://forum.gsmhosting.com/vbb/f296/jazz-xplore-jf100-mt6276-nand-factory-file-read-done-2130453/#post13971574
[19:50:56] > CHIP : MT0000 , SBID : 0x0000
No connection at all
Try again with old CM2MTK
Probably need to hold power button more time
[19:42:55] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT0000 , SBID : 0x0000 , HWVR : 0x0000 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 0C2E8E2515D9332FFEB43E860621267C
BROM : SecLevel : 0x00000000
BROM : SecMode : PLA
[19:36:58] try with CM2MT2.exe but not with CM2MTK.exe
[19:34:57] Card found : S/N : E80920E5 , v0152
Chinese Miracle II [MTK module] v 1.58

Operation : Read UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( \'*\' )

Wait for phone...
Phone found! [ 7 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6276
BB_CPU_HW : CB00
BB_CPU_SW : 0101
BB_CPU_SB : 8A00
BB_CPU_NM : [MediaTek] MT6276_S0000
BROM Protocol Version : 05
Setting...
RTC/PowerLatch Settings Failed #1 (HW/C
[19:34:38] The same idea :)
Try to connect cable and click to IDENTIFY button
see result
[19:33:59] My apologies it\'s 6276 the type of cpu id
[19:31:11] No idea yet. Try to connect cable and click to IDENTIFY button
[19:30:34] Pass word Alcatel 2045x CPU 6267 suported ?
[19:25:07] inbox is forbidden here
if you know how to fix write here for everybody
[19:23:16] Dm
[19:09:17] https://youtu.be/UE-tn6C2Nd0
[18:47:28] https://www.youtube.com/watch?v=S5zXrVwMbQM
[18:46:14] pls explain what is the problem?
[18:46:14] Ok the probelem is when i open googleplaystore ceritified problem and mobile data works only 2g and 3g 4g notworing and also when *#06# dial null imei But when i see about phone setting imei there haw can fix thos problem
[18:37:30] Please is there anyway to unlock pattern on galaxy A125f without data loss
[18:20:46] How to install drivers in emergency for use infinity qlm module
[18:19:43] as I remember this model is not supported
[18:19:09] S3 mini sir
[18:18:48] Do you mean Galaxy S3?
[18:17:05] pls explain what is the problem?
[18:14:31] Yes thanks 💖
[18:13:36] I want to move password
[18:11:19] the problem comes after frp reset
[18:09:35] what is the phone model?
software log text?
[18:09:35] Mrd-Lx1f
[18:07:09] I8190
[18:06:39] what is the phone model?
software log text?
[18:06:15] please explain
what is \"unknown model\" means
[17:43:24] Tecno rc6 unlocked nvram
[17:42:38] Y6prime2019 unkown model probelem help me
[17:20:45] It not recognise phone
[17:17:21] Afternoon, please how to do toi use infinity qualcom
[17:16:11] For normal Samsung working phone what should be the kg status ???????
[17:06:25] which dongle or boxes support exunos cpu?
[17:04:45] ❤️👍
[17:02:09] Found 5 files W6502
1. iTel_W6502_F3108_10.0_OP_V028_20210304
2. iTel_W6502_F3108_10.0_OP_V032_20210802
3. iTel_W6502_F3108_10.0_OP_V031_20210531
4. iTel_W6502_F3108_10.0_OP_V033_20210922
5. [16:09:46] Can someone assist with iTel W6502 loader
[15:56:03] Found 1 file mrd-lx1f
1. MTK_Huawei_Huawei_Y6_Prime_MRD_LX1F

Make your search here @FlashFileSearchBot
[15:54:43] does default da not working?
[15:54:34] Y need da?
[15:54:11] Haw i can get mrd-lx1f da file
[15:37:09] What is your dongle S/N?
[15:35:48] google and youtube helps with the schematics
Also we will try to collect pictures later
[15:35:01] ok. And good way in future is copy sw log text, it has info about the process
https://forum.infinity-box.com/viewtopic.php?t=1828
[15:33:40] pls upload good firmware files for all users if you can https://infinity-box.com/?r=100020
[15:32:57] Not all models are supported for safe reset yet.

Check your model here https://forum.gsmhosting.com/vbb/f296/reset-without-lost-user-data-write-here-success-reports-2997627/

and here https://forum.gsmhosting.com/vbb/f296/oppo-lost-data-after-safe-format-2997569/

post your report to forum
[15:31:56] it may takes more than 15 min.
see here https://infinity-box.com/?r=100163
[15:31:02] it was autoanswer, leave it
[15:28:55] Found 1 file touch G3 plus
1. G_Touch_SP7731GEA_HDR_G3_Plus_8.1_G_Touch_G3_Plus_Android_8.1_V01_BOE_2019_12_12_G3_Plus

Make your search here @FlashFileSearchBot
[15:26:44] run Infinity DongleManager and update dongle firmware now
[15:25:02] Make this https://infinity-box.com/?r=100155
[15:25:02] Make this to fix misconfiguration https://infinity-box.com/?r=100155
Is it Ok now?
[15:24:13] https://duckduckgo.com/?t=ffsb&q=0xc000007b&ia=answer
[15:21:56] Fix PC step-by-step https://infinity-box.com/?r=100103
[15:18:14] run \\CM2SP2\\CM2SP2.exe and do it with your C20
credits need
[15:17:18] Ok
[15:16:10] Copy here software log text this way https://forum.infinity-box.com/viewtopic.php?t=1828
[15:15:04] Core
[15:14:52] Samsung M013f
[15:14:31] What is your dongle S/N?
[15:14:10] What is the model name?
[15:13:28] pls post log text
we ask users about that to see software results.
It\'s not for fun but for future development and to collect phones database
[15:12:37] nothing to do for admins,
he must login to is account and check it but not to write wrong info
[15:12:27] OPPO still not support for imei repair .let waiting in future update
[15:11:47] screensot of your account?
[15:11:31] server do not charge for the say imei twice,
post screenshot of your account and read this https://infinity-box.com/?r=100163
[15:09:51] for X657B and X657C use \\CM2MT2\\CM2MT2.exe

https://infinity-box.com/?b=58#58
[15:08:17] Found 1 file huawei y550
1. Huawei_Honor_MSM8916_HUAWEI_Huawei_ANDR_v4.4.4_HUAWEI_Y550_L01_hwY550_L01_Y550_L01

Make your search here @FlashFileSearchBot
[14:55:23] Realme u1 power key diegram
[14:53:28] there is no any limits, you can get so many credits as you need.
Ask any seller https://infinity-box.com/buy/
[14:48:29] Found 9 files qmobile i8i
1. QMobile_QMobile_i8i_2019_MP_V4.0_19_02_Y400BG_8.1_QMB_PK_BR1_29
2. QMobile_SP7731E_QMobile_I8I2019_8.1.0_OPM2.171019.012_i8i_2019
3. QMobile_SP7731CEA_i8i_7.0_QMobile_i8i_MP_30_09_QMobile_i8i_11_08_2017
4. [14:48:08] It’s now working after renew? It was expired
[14:46:41] What is the dongle S/N?
[14:44:57] Type: Infinity-Box/Dongle [CM2]
S/N: B4AD3154
Username: 00B4AD3154
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0118; Expired: 12-Nov-2012

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period
[14:43:49] KG state process https://forum.infinity-box.com/viewtopic.php?t=3949
[14:36:03] post software log with your result
[14:35:31] Found 1 file huawei y550
1. Huawei_Honor_MSM8916_HUAWEI_Huawei_ANDR_v4.4.4_HUAWEI_Y550_L01_hwY550_L01_Y550_L01

Make your search here @FlashFileSearchBot
[14:34:04] It depends. Need to try and see more reports later for different models and firmwares
[14:33:47] Excellent job sir, what if the boot loader is locked can’t connect to boot rom? How we unlock it? Can’t connect to mtk port since it’s locked?
[14:32:36] Perment or temporary after internet connection ?
[14:31:54] Try bro,
Post results log here
[14:27:49] Ok let try on oppo A31
[14:26:55] it may depends on model. You can try and post results
And more changes regarding oppo is in development now
[14:23:57] this is Infinity-Box official group, so talk about only Infinity-Box related products.
[14:23:31] MTK2.33 support OPPO imei repair?
[14:23:04] KG state process https://forum.infinity-box.com/viewtopic.php?t=3949
[14:11:16] To do job u don\'t need da. Just tick ssla, hold both volume keys and connect USB cable and u are a go
[14:10:29] Spd phone choose 9832E in sp2 thn format
[14:10:05] Mrt q nahi kam kar raha hai sir
[13:54:09] https://youtu.be/_tSemnnJlhQ
[13:53:35] Set needed kg option and do smart reset extra
[13:51:48] Yeah I renewed for 2years and now working😀 but explain on how to bypass kg on samsung with this update! Eg samsung A12 !!! Thanks
[13:44:35] What is the Model name?
[13:30:15] See here https://forum.infinity-box.com/viewtopic.php?t=3947
[13:29:19] Y336
[13:23:01] I wnt removed kg
[13:22:45] Without errors
[13:22:40] Can use dis to read os11 and ryt back
[13:17:55] really permanently - only via server
[13:17:42] Connect into brom mode
[13:17:26] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM27)
MODE : PRELOADER PORT
PORT : 27
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BR
[13:17:21] First write model name
[13:16:43] Try another base and try with sSLA checked
[13:10:19] Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM27)
MODE : PRELOADER PORT
PORT : 27
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BR
[13:06:07] 🔥 BIG UPDATE SMD Activator
Now supported much more devices for MEID/GSM 14.6+

✅ refurbished
✅ replaced
✅ specific carrier policy
❌ carrier locked still NO

Need to test to have full info

✅ The list of supported devices
✅ MEID/GSM with signal 📶
🔥 Has been extended

Check all your unsupported device again in SMD Activator

Sn registers contact @ceylonztech

https://bysmd.com/SMDActivator.zip
[13:03:24] yes
[13:01:50] > DA : USB : Change Port Speed

Do not use USB HUB.
Try to use another USB cable, use short cable.
Try another USB port
Use USB3 port (blue color) if available
[12:57:24] Don\'t wait 3 months, just make this now https://forum.gsmhosting.com/vbb/f296/how-fix-cm2-software-can-not-run-2855041/
[12:57:04] Now fix your PC this way https://forum.gsmhosting.com/vbb/f296/how-fix-cm2-software-can-not-run-2855041/
Write here results of all steps and tell us how many viruses was found and deleted at your PC
[12:56:17] There is an issue with your PC.
I guess you damaged your PC with some kind of usb sharing tools. Ne careful and do not install unknown tools to your PC, you are under attack by many bad people who want to spy for your activity and who want to steal your data
[12:53:37] Check message again and follow it right
[12:53:09] Do you hold boot keys till tool show boot done?
[12:42:58] stuck on here
[12:42:11] Card found : 21CB15AD , v0152
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.33

Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Identify [ v2.33 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM28)
MODE : BOOTROM
PORT : 28
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CH
[12:39:37] Please house can cm2 mt2 remove mi account permanently on redmi 9c Angelica
[12:36:21] How to easier get this?
[12:34:42] ok
[12:34:05] support period expired need to renew
[12:33:33] === Donglehanager [Infinity] v1.89 (2/10/2022 3:31: 44 PM] ===
Searching.
(Card-Reader: Gemalto -gate Smart Card 0
HWID:0003315400001942
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading.
Serial No (S/N):
Firmware version: 0151.02
=== Started: 2/10/2022 3:31:48 PM ===
Connecting to server.
Connection successfully established
Checking DongleManager version.
(DongleManager is up-to-date
Checking Dongle Identification.
Authenticating on server..
Authentication stage error:
Server answer: (00071 No update av
[12:33:10] Identify first

Then do your frp task
[12:32:56] === Donglehanager [Infinity] v1.89 (2/10/2022 3:31: 44 PM] ===
Searching.
(Card-Reader: Gemalto -gate Smart Card 0
HWID:0003315400001942
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading.
Serial No (S/N):
Firmware version: 0151.02
=== Started: 2/10/2022 3:31:48 PM ===
Connecting to server.
Connection successfully established
Checking DongleManager version.
(DongleManager is up-to-date
Checking Dongle Identification.
Authenticating on server..
Authentication stage error:
Server answer: (00071 No update ava
[12:32:39] Connect in brom mode by holding both Vol keys
[12:32:01] it shows charging
[12:31:29] ipdate with dongle manager
[12:31:29] Why that error after update?
[12:31:06] With universal connection

You don’t need Da file
[12:30:43] Yes supported cm2mt2
[12:30:34] Base 2044

Tick SLA and reboot
[12:30:09] i use it but i get error
[12:26:08] Use latest CM2 with universal connection method
[12:24:52] Knox gard
[12:23:54] admin i need infinix x657 da file
[12:23:52] But still same
[12:23:43] Selected preloader only , untucked emi , even changed emi to 1 and 2
[12:21:12] But i need 5 credit only
[12:19:04] Send your IOS Username to seller https://infinity-box.com/buy/\r
\r
How to know Username https://infinity-box.com/service/
[12:19:04] How to buy credit direct to my account
[12:18:55] hello guys i ned to remove frp infinix x657 with cm2
[12:18:07] Hi
[12:16:52] S16:frp is suported
[12:01:09] Admin will rectify
[11:57:39] Ok bro
[11:50:52] 10 crd gone
[11:50:33] i have been charged twice on ta1352 and still no unlock
[11:46:31] Select other EMI number or select preloader from firmware or try to uncheck AutoEmi under setting tab and repeat process.
[11:45:46] Untick auto EMI in settings bro
[11:42:51] I have been having problems with my infinity box for some time I redid the system of my laptop but it all does not work please tell me what to do or my box is spoiled
[11:35:49] Locking after connect to WiFi or internet, right?
[11:31:46] Its still locking kg after either dissable or complete
[11:24:53] Use cm2spd2 bro
[11:21:16] spd
[11:18:37] Chipset?
[11:18:06] network
[11:17:57] Password or network?
[11:16:12] ok , request forward to dev team
[11:15:55] Infinity team you are doing a great job
Please guys update qualcome tool let it be powerfull as mtk tool
[11:14:48] ta 1352 unlock?
[11:11:08] We are not bound to repair your pc
All instructions available in this group and on forum too
Scan PC with good antivirus delete cm2 folder re install again
[11:08:33] This problem face
[11:08:21] Problem
[11:08:19] Tool not open
[11:04:18] Thank you sir
[11:04:17] ❤️❤️❤️🔥🔥🔥🔥🔥🔥
[11:00:42] Yes i am running latest version but i dont know how to in the memory tool tab
[10:59:10] Try latest version
[10:57:04] Cant cm2 unlock samsung A107f kg status
[09:24:16] What code?
[09:23:47] PLZ..
HELP MEE
[09:23:24] DBD92578
[09:12:18] Any one with flash file
[09:11:41] G touch G3 plus
[09:11:15] It\'s spd
[09:10:23] Flash file
[09:04:19] got u, i wil wait when its completed.
[08:53:40] Repeat the process if completed.
[08:53:07] Wait server accept your phone.
[08:49:36] I don\'t undestand here
[08:48:00] Send your IOS Username to seller https://infinity-box.com/buy/\r
\r
How to know Username https://infinity-box.com/service/
[08:48:00] Anyone request Da nowdays is \"Crackers\" 😄
[08:46:39] I used cm2 so i don need any Da, and this forum is for cm2 user only
[08:43:23] How about getting da file?
[08:42:34] Not possible
[08:41:39] Can I remove pattern lock on infinix X688 without data loss?
[08:40:52] Good day sir
[08:34:15] Finally i have got phone Mobicel_rio_rw, i unlocked and backup firmware.
[08:06:48] Found 2 files tecno bd3
1. Tecno_BD3_WZ802AB_RGo_OP_210707V017
2. Tecno_BD3_WZ802AB_RGo_OP_210930V020

Make your search here @FlashFileSearchBot
[07:37:05] Dear support try improve password for oppo F9 try few time still failed
[07:35:24] Help me plz
[07:26:31] How can we find that resistor in any xiaomi mobile?
[07:12:57] https://t.me/MyFoneUnlocker
[06:45:08] 🧐🧐🧐
[06:40:33] TA-1203 firmware please
[06:37:25]
[06:28:55] https://youtu.be/_tSemnnJlhQ
[06:05:34] Use my link to download OPay can get up to ₦6,950 welcome bonus! And get amazing discount of airtime/data and more privileges.

https://mkt.opayweb.com/user/invite/friend?&inviteCode=7q5%2BEL0SBIuwvTMBpov%2BZUcaRvN6aWjoi%2FOVjp1KWRXw7ikiOoTNOmK4J7FcfeWU
[06:01:23] Update firmware
[06:00:52] This version not working
[05:59:47] download dongle manager
and update card
[05:59:47] Update your dongle with Dongle manager
[05:57:22] Solution please
[05:51:32] thanku boss done
[05:42:58] please error solution cm2spd2
[05:42:45] DongleManager has DEFAULT FACTORY password.\r
You must use the same password as for your IOS web account.\r
\r
Reset password here https://infinity-box.com/?r=16
[05:42:45] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : itel_L5006C_010_01020_10042021.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL .
[05:14:37] yeah i know . after reset use the code to clear the frp
[05:13:51] Diag mode dont remove frp it just wipe userdata
[05:11:48] ITS DONE VIE DIAG MODE THNX
[05:06:05] Load pac and repeat
[05:04:46] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_UT61x_BASE : UT61x_eMMC_4GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[05:04:43] realme RMX3263 NOT BOOT NEED HELP
[04:42:13] hlo
[04:35:52] Hii
[03:55:34] Can see card is ok and have latest firmware
[03:55:16] What issue ?
[03:26:43] Paise waste
[03:26:35] 😔
[03:26:27] 3 months complete this problem..
[01:47:38] I see text after reset when i boot in download mode to check the status of kg lock
[00:59:06] Model pr651h
[00:46:23] Use diag mode/SVC sorted bro
[00:40:39] Click on the drop down key to select othet options sir.
[00:34:35] This are samsung phones that are under organisations that gives them out on mortagage, so they have a knox guard (KG) to protect them against the end user who cannot use if not paid.
[00:21:58] ok sir thanks you
[00:21:37] He did not sent order to us yet.
ask him to cancel wrong order and make good one
[00:17:00] It’s still in process from web
[00:16:17] PaidUnlock sir
[00:16:06] ?
[00:12:46] What yes?
Where?
[00:12:32] Yes sir
[00:12:19] Hi
There is no such order,
Have you activated it via seller or via Infinity web site?
[00:09:45] Hello Dear support can u reject SN:681896 from server i active wrong SN

InfinityBoxTalks 2022-02-09

[23:25:41] Am proud of infinity dongle
[23:19:41] Try to correct your username and password
[23:19:15] https://infinity-box.com/news/?r=4229
[23:16:45] Good update and great job infinity team
[22:55:44] The new update?
[22:36:38] Make this https://infinity-box.com/?r=100155
[22:35:48] Do you see any text?
[22:09:22] Problem
[22:09:15] V2.32 tool not open
[21:30:24] resistor
[21:19:35] For xiaomi mtk dual sim imei repair 🧑‍🔧??