|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
12-07-2021, 14:55
| #1 (permalink) |
| Product Supporter  Join Date: Jun 2009 Location: private
Posts: 36,472
Member: 1043909 Status: Offline Thanks Meter: 60,926 | Infinity Chinese Miracle-2 CM2MT2 v2.31 - New features activated Core Changed: Activated FireFly over DA ! Support latest UFS-based SoC : MT6781, MT6785, MT6779, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893 ! Support eMMC-based SoC : MT6739, MT6757, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6797, MT8167 ! Supported operation : Generic MTK + Bootloader Unlock is available now for all latest SoC FireFly FireFly: NewSOC: MT6753 [Legacy] FireFly: Bootloader Unlock activated for LEGACY phones ! Support for now: MT6580, MT6737 ( tested and confirmed as working ) Current list of supported SoC: Legacy : MT6580, MT6735, MT6737, MT6753 Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771 !! EOL info and other HW stuff also shown for LEGACY !! On LEGACY devices in most cases UserData encryption can be not set. !! FireFly allow boot/read even for devices with dead DRAM - no need desolder eMMC for data recovery! Flasher Changed: UltraFlash engine updated Firmware Reader Changed: New types supported Changed: Internal Database updated Changed: Vivo, Oppo, Realme - firmware naming optimized - model, type, internal versioning etc. MemoryTool Changed: MemoryTool rebuild Changed: Activated "Make Backup" option Changed: Activated "Restore Backup" option Service Changed: "SmartReset" rebuild !Remove flyme account improved ( meizu ) !Reset FRP may fail on some devices, fixed !Improved work in FireFly mode !Improved compatibility with old Android(4 - 7) versions Changed: Security info reading improved Changed: Reset PrivacyLock activated under FireFly mode Changed: Backup ext_csd data during Identify under FireFly mode Changed: Bootloader Unlock rebuild (FireFly / Generic) Changed: Bootloader Unlock activated for more SoC : MT6757, MT6781, MT6785, MT6779, MT6797, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893, MT8167 Changed: Bootloader Unlock activated for more SoC : MT6580, MT6737 Other Changed: Many internal changes and bugfixes Download link #1 Download link #2 Download link #3            |
 |
| The Following 46 Users Say Thank You to YellowBoss For This Useful Post: |
|
12-07-2021, 15:06
| #2 (permalink) |
| No Life Poster   Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | In case of any non-start, data decryption failures on LEGACY phones with Secboot - just wipe seccfg partition to restore phone back to untouched state. |
| |
| The Following 12 Users Say Thank You to JayDi For This Useful Post: |
|
12-07-2021, 15:07
| #3 (permalink) |
| No Life Poster Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | Users reported about SmartReset SAFE option DOES NOT WORK AND RESET data on following device(s) :
Known patch versions for A5S : Code: Ver. Release : 8.1.0 Sec. Patch : 2021-04-05 Product Manfct : OPPO Build Time : 19.03.2021 Product Brand : OPPO Product Model : CPH1909 Last edited by JayDi; 12-07-2021 at 15:12. |
| |
| The Following 12 Users Say Thank You to JayDi For This Useful Post: |
|
12-07-2021, 15:13
| #4 (permalink) |
| No Life Poster Join Date: Nov 2013 Location: pakistan P G L Age: 39
Posts: 1,127
Member: 2067643 Status: Offline Sonork: 1611265 Thanks Meter: 474 | Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM23) MODE : BOOTROM PORT : 23 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Talbot TYPE : MODERN [RAPHAEL] BROM : MEID : 60D352FE0B9A86CF1DA3AEEEDF93B5F1 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM|BL : 0x05|0xFE BROM : BOOTROM BROM : SOCID : 00F5D29EFE49E9CDF7CCA173DD9DE35D32BFD52D0531580FE9 E19AAE205CDF09 BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : FF : Look for EMI BROM : FF : EMI found! BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : 0_base : BASE_v2112 | Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6768 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : FireFly EMI : SRC : preloader_k68v1_64.bin EMI : CNT : 000B EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00070000 [ 448.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: CID : 150100445636444D42021868903A3793 EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445636444D42 EMMC: VEN : SAMSUNG : DV6DMB EMMC: SNN : 409505850 ( 0x1868903A) , MF : 3/2020 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x01000000 [ 16.00 MB ] USER : 0x1D1EC00000 [ 116.48 GB ] CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000 RNID : 1053C2559850CB8B4AD3D218BFE1A220 DA : USB : HIGH-SPEED Boot done! Product Brand : vivo Product Device : 1907N Product Model : vivo 1907 Product Name : 1907N Patch Level : RP1A.200720.012 Display ID : RP1A.200720.012 release-keys Product Info : k68v1_64 Ver. CodeName : REL Ver. Release : 11 Sec. Patch : 2021-10-01 Build Time : 13.10.2021 Product Board : k68v1_64 Board Platform : mt6768 Product Manfct : vivo USERDATA : FILESYSTEM : EXT4 with FBE ( File-Base Encryption ) NVRAM : BBK_R0MP1_K68V1_64_BSP_MDBIN_PCB01_MT6768_S00.MOLY _LR12A_R3_MP_V136_6_P35 NVRAM : 0xB50F6BAF NVRAM : State : Ok! INFO : WiFi MAC : 708F4713A603 INFO : BlTh MAC : 708F4713A602 INFO : IMEI[1] : 863691041719974 INFO : IMEI[2] : 863691041719966 Backup sensetive data [ 16 ] Backup path : Backup\MT6768__60D352FE0B9A86CF1DA3AEEEDF93B5F1\ [23] Read : NVRAM [14] Read : NVDATA [20] Read : PROINFO [33] Read : LK [13] Read : NVCFG [16] Read : PROTECT1 [17] Read : PROTECT2 [1] Read : PGPT [15] Read : PERSIST [0] Read : PRELOADER Backup done! STORAGE : Life Status : eMMC : OK! STORAGE : OTP Status : UNLOCKED! PRELOADER : DEVICE : DEV : MT6752 NME : preloader_k68v1_64.bin CNT : 000B EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ] EMI : [01] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ] EMI : [02] : eMMC : LP_DDR4X : ID : 150100335636434D42 : VEN : SAMSUNG | DEV : 3V6CMB : RAM : [ 6.00 GB ] EMI : [03] : eMMC : LP_DDR4X : ID : 150100445636444D42 : VEN : SAMSUNG | DEV : DV6DMB : RAM : [ 4.00 GB ] EMI : [04] : eMMC : LP_DDR4X : ID : 90014A684445615033 : VEN : HYNIX | DEV : hDEaP3 : RAM : [ 6.00 GB ] EMI : [05] : eMMC : LP_DDR4X : ID : 13014E53304A394B39 : VEN : MICRON | DEV : S0J9K9 : RAM : [ 4.00 GB ] EMI : [06] : eMMC : LP_DDR4X : ID : 13014E47314A395139 : VEN : MICRON | DEV : G1J9Q9 : RAM : [ 6.00 GB ] EMI : [07] : eMMC : LP_DDR4X : ID : 13014E47314331324C : VEN : MICRON | DEV : G1C12L : RAM : [ 8.00 GB ] EMI : [08] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ] EMI : [09] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 8.00 GB ] EMI : [0A] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ] PRELOADER saved to : Backup\PRELOADER\preloader_k68v1_64.bin Done! Elapsed: 00:00:37 Mode : SMART RESET EXTRA 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM23) MODE : BOOTROM PORT : 23 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Talbot TYPE : MODERN [RAPHAEL] BROM : MEID : 60D352FE0B9A86CF1DA3AEEEDF93B5F1 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM|BL : 0x05|0xFE BROM : BOOTROM BROM : SOCID : 00F5D29EFE49E9CDF7CCA173DD9DE35D32BFD52D0531580FE9 E19AAE205CDF09 BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : 0_base : BASE_v2112 | Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6768 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : FireFly EMI : SRC : preloader_k68v1_64.bin EMI : CNT : 000B EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00070000 [ 448.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: CID : 150100445636444D42021868903A3793 EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445636444D42 EMMC: VEN : SAMSUNG : DV6DMB EMMC: SNN : 409505850 ( 0x1868903A) , MF : 3/2020 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x01000000 [ 16.00 MB ] USER : 0x1D1EC00000 [ 116.48 GB ] CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000 RNID : 1053C2559850CB8B4AD3D218BFE1A220 DA : USB : HIGH-SPEED Boot done! SmartInfo : 0x835757 Format Ok : RESET PROTECTION ERR : 0xC0010001 ERR : ERROR ERR : 0x00200000|0x005256F4 Format Ok : USERDATA Card found : 9676977F , v0151 Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.31 |
| |
|
12-07-2021, 15:14
| #5 (permalink) |
| No Life Poster Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | RAPHAEL random (ufs/emmc) : Code: Operation : Unlock BootLoader [ v2.31 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6853 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Moution
TYPE : MODERN [RAPHAEL]
BROM : MEID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : xxxxxxxxxxxxxxxxxxxxxxxx
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6853
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_cannong.bin
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00070000 [ 448,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]
UFS: CE014B4D354337303031444D2D423632
UFS:
VEN : 0x01CE
VID : KM5C7001DM-B62
IFW : 0200
LU0 : 0x00400000 [ 4,00 MB ]
LU1 : 0x00400000 [ 4,00 MB ]
LU2 : 0xEE5800000 [ 59,59 GB ]
FSN : xxxxxxxxxxxxxxxx
REG : 0x101010000
CHIP : MT6853 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000
RNID : xxxxxxxxxxxxxxxxxxxxxx
DA : USB : HIGH-SPEED
Boot done!
Product Brand : Redmi
Product Device : cannong
Product Model : M2007J22G
Product Name : cannong_global
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-12-01
Build Time : 20.12.2020
Product Info : cannong
Product Manfct : Xiaomi
Product Board : cannong
Board Platform : mt6853
BootLoader State : Unknown!
BootLoader State : Unlocked
Done!
Elapsed: 00:00:31 Code: Operation : Unlock BootLoader [ v2.31 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6873 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Margaux
TYPE : MODERN [RAPHAEL]
BROM : MEID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x000000E0
BROM : SecMode : EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6873
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k6873v1_64.bin
EMI : CNT : 0011
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00070000 [ 448,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]
UFS: AD014839485132324146414D4D444152
UFS:
VEN : 0x01AD
VID : H9HQ22AFAMMDAR
IFW : A106
LU0 : 0x00400000 [ 4,00 MB ]
LU1 : 0x00400000 [ 4,00 MB ]
LU2 : 0x3B96000000 [ 238,34 GB ]
FSN : 0xxxxxxxxxxx
REG : 0x101010000
CHIP : MT6873 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000
RNID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
DA : USB : HIGH-SPEED
Boot done!
Product Brand : Blackview
Product Device : BL6000Pro
Product Model : BL6000Pro
Product Name : BL6000Pro
Patch Level : QP1A.190711.020
Display ID : BL6000Pro_S1_210114
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-12-05
Build Time : 14.01.2021
Product Info : BL6000Pro
Product Board : k6873v1_64
Board Platform : mt6873
Product Manfct : Blackview
BootLoader State : Locked!
BootLoader State : Unlocked!
Done!
Elapsed: 00:00:24
Reconnect Power/Cable! Code: Operation : Unlock BootLoader [ v2.31 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x000000E1
BROM : SecMode : SBC+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_wasp.bin
EMI : CNT : 0007
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x0003A400 [ 233,00 KB ]
DRAM: 0x20000000 [ 512,00 MB ]
EMMC: CID : 88010344394431364738B25xxxxxxxxxx
EMMC: VEN : FORESEE : OEM : 3 : ID : 443944313647
EMMC: VEN : FORESEE : D9D16G
EMMC: SNN : xxxxxxxx( 0xxxxxxxxxx) , MF : 6/2019
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x39D000000 [ 14,45 GB ]
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000
RNID : xxxxxxxxxxxxxxxxxxxx
DA : USB : HIGH-SPEED
Boot done!
Patch Level : PPR1.180610.011
Display ID : 00WW_1_680
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-10-05
Build Time : 12.10.2019
Product Model : Nokia 2.2
Product Brand : Nokia
Product Name : Wasp_00WW
Product Device : WSP_sprout
Product Manfct : HMD Global
Product Info : WSP_sprout
Product Model : 00WW
Product Board : MT6761
Board Platform : mt6761
BootLoader State : Unlocked!
BootLoader State : Locked!
Done!
Elapsed: 00:00:26 Code: Operation : Unlock BootLoader [ v2.31 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN [RAPHAEL]
BROM : MEID : xxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : EMI : Search
BROM : EMI : Found!
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6797
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k15tb_a.bin
EMI : CNT : 0004
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00039000 [ 228,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]
EMMC: CID : 150100424A4E42345207xxxxxxxxxxxxxxxx
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 424A4E423452
EMMC: VEN : SAMSUNG : BJNB4R
EMMC: SNN : xxxxxxxxxxxx( 0xxxxxxxxxxx) , MF : 6/2016
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]
CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : xxxxxxxxxxxxxxxxxxxxxxxxxx
DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Boot done!
Patch Level : MRA58K
Display ID : alps-mp-m0.mp9-V1.78.1_nb6797.6c.m_P10
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-05
Build Time : 29.08.2016
Product Model : k15tb_a
Product Brand : alps
Product Name : full_k15tb_a
Product Device : k15tb_a
Product Manfct : alps
Board Platform : mt6797
Product Info : k15tb_a
BootLoader State : Locked!
BootLoader State : Unlocked
Done!
Elapsed: 00:00:25
Reconnect Power/Cable! LEGACY : Code: Operation : Unlock BootLoader [ v2.31 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : Sending FireFly
FireFly : Starting ...
FireFly : Init Core
FireFly : Core init done!
FireFly : Running : v04.04.04 on MT6735
FireFly : eMMC init passed!
EMMC: CSD : D02701320F5903FFFFFFFFEF8A4040D3
EMMC: CSD : TEMP_WRITE_PROTECT: False
EMMC: CSD : PERM_WRITE_PROTECT: False
EMMC: CID : 90014A48414732650507xxxxxxxxxxxx
EMMC: VEN : HYNIX : OEM : 74 : ID : 484147326505
EMMC: VEN : HYNIX : HAG2e
EMMC: SNN : xxxxxx( 0xxxxxxx) , MF : 1/2016
EMMC: EXTCSD : rev1.7 ( eMMC 5.0 )
EMMC: EXTCSD [BOOT_BUS_WIDTH] : 0x00
EMMC: EXTCSD [PARTITION_CONFIG] : 0x48
EMMC: EXTCSD [SIZE] : Market : 16 GB
EMMC: EXTCSD [SIZE] : Actual : 0x3AB800000 [ 14,68 GB ]
EMMC: EXTCSD [EOL] : EOL status : Normal ( Less than 80% reserved blocks used )
EMMC: EXTCSD [EOL_A] : SLC status : 0% - 10% used
EMMC: EXTCSD [EOL_B] : MLC status : 10% - 20% used
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
USER : 0x3AB800000 [ 14,68 GB ]
DA : USB : HIGH-SPEED
Boot done!
Product Brand : DOOGEE
Product Device : X95
Product Model : X95
Product Name : X95
Patch Level : QP1A.190711.020
Display ID : DOOGEE-X95-Android10.0-20200610
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-06-05
Build Time : 10.06.2020
Product Info : X95
Product Board : te585_dg_1910s_37_q0_go_noeea
Board Platform : mt6737m
Product Manfct : DOOGEE
BootLoader State : Unlocked!
BootLoader State : Locked!
Done!
Elapsed: 00:01:12
Reconnect Power/Cable! Code: Operation : Unlock BootLoader [ v2.31 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : Sending FireFly
FireFly : Starting ...
FireFly : Init Core
FireFly : Core init done!
FireFly : Running : v04.04.04 on MT6580
FireFly : eMMC init passed!
EMMC: CSD : D02701320F5903FFF6DBFFEF8E40400D
EMMC: CSD : TEMP_WRITE_PROTECT: False
EMMC: CSD : PERM_WRITE_PROTECT: False
EMMC: CID : 1501004B3758564D4201xxxxxxxxxxxxxx
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 4B3758564D42
EMMC: VEN : SAMSUNG : K7XVMB
EMMC: SNN : xxxxxxxxxxx( 0xxxxxxxxxx) , MF : 2/2015
EMMC: EXTCSD : rev1.7 ( eMMC 5.0 )
EMMC: EXTCSD [BOOT_BUS_WIDTH] : 0x00
EMMC: EXTCSD [PARTITION_CONFIG] : 0x48
EMMC: EXTCSD [SIZE] : Market : 8 GB
EMMC: EXTCSD [SIZE] : Actual : 0x1D2000000 [ 7,28 GB ]
EMMC: EXTCSD [EOL] : EOL status : Normal ( Less than 80% reserved blocks used )
EMMC: EXTCSD [EOL_A] : SLC status : 10% - 20% used
EMMC: EXTCSD [EOL_B] : MLC status : 10% - 20% used
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
USER : 0x1D2000000 [ 7,28 GB ]
DA : USB : HIGH-SPEED
Boot done!
Patch Level : NRD90M
Display ID : NRD90M.G955USQU1AQC9
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2019-03-01
Build Time : 12.07.2019
Product Model : SM-G960F
Product Brand : samsung
Product Name : dream2qltesq
Product Device : dream2qltesq
Product Board : msm8998
Product Manfct : samsung
Board Platform : mt6580
Product Info : dream2qltesq
BootLoader State : Unlocked!
BootLoader State : Locked!
Done!
Elapsed: 00:00:48
Reconnect Power/Cable! Last edited by JayDi; 12-07-2021 at 15:22. |
| |
| The Following 15 Users Say Thank You to JayDi For This Useful Post: |
|
12-07-2021, 15:15
| #6 (permalink) | |
| No Life Poster Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | Quote:
Is there any issue with result? Reset done on device? | |
| |
| The Following 5 Users Say Thank You to JayDi For This Useful Post: |
|
12-07-2021, 15:29
| #7 (permalink) |
| No Life Poster Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | MT6781 tests : https://forum.gsmhosting.com/vbb/f29...pport-2995380/ Unlock is also supported. Code: Operation : Unlock BootLoader [ v2.31 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6781 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Lagrange
TYPE : MODERN [RAPHAEL]
BROM : MEID : xxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : xxxxxxxxxxxxxxxxxxxxxx
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6781
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_oplus6781.bin
EMI : CNT : 000C
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00060000 [ 384,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]
UFS: 2C014D54303634474153414F32553231
UFS:
VEN : 0x012C
VID : MT064GASAO2U21
IFW : 0109
LU0 : 0x00400000 [ 4,00 MB ]
LU1 : 0x00400000 [ 4,00 MB ]
LU2 : 0xEE5800000 [ 59,59 GB ]
REG : 0x101010000
CHIP : MT6781 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : xxxxxxxxxxxxxxxxxxxxxxxxxxx
DA : USB : HIGH-SPEED
Boot done!
Product Board : oplus6781
Board Platform : mt6781
Product Brand : alps
Product Device : oplus6781
Product Manfct : alps
Product Model : oplus6781
Product Name : vnd_oplus6781
BootLoader State : Locked!
BootLoader State : Unlocked!
Done!
Elapsed: 00:00:30
Reconnect Power/Cable! |
| |
| The Following 10 Users Say Thank You to JayDi For This Useful Post: |
|
12-07-2021, 17:34
| #8 (permalink) |
| No Life Poster Join Date: Mar 2011 Location: Faisalabad
Posts: 1,482
Member: 1527968 Status: Offline Sonork: 100.1651182 Thanks Meter: 483 | Plz work on security section oppo vivo remdi dual imei repair |
| |
| The Following User Says Thank You to alimobile279 For This Useful Post: |
|
12-07-2021, 17:35
| #9 (permalink) |
| No Life Poster  Join Date: Feb 2008 Location: Egypt Age: 37
Posts: 1,299
Member: 710690 Status: Offline Thanks Meter: 907 | thank you for more support please repair IMEI for xiaomi we need to repair dual sim if possible |
| |
| The Following User Says Thank You to amrMHF For This Useful Post: |
|
12-07-2021, 18:11
| #10 (permalink) | |
| No Life Poster Join Date: Nov 2016 Location: GUJARAT
Posts: 1,439
Member: 2643730 Status: Offline Thanks Meter: 1,115 | Quote:
| |
| |
|
12-08-2021, 05:47
| #15 (permalink) | |
| No Life Poster Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | Quote:
| |
| |
| The Following 3 Users Say Thank You to JayDi For This Useful Post: |
|
| Bookmarks |
| |
|
|
Linear Mode
