GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box > BB5 Easy Service Tool (BEST) Nokia Dongle

Reply
 
LinkBack Thread Tools Display Modes
Old 11-04-2016, 12:32   #1 (permalink)
No Life Poster
 
muzammal mudass's Avatar
 
Join Date: Oct 2012
Location: Pakistan ,Sahiwal ,Bwn
Age: 30
Posts: 1,116
Member: 1819120
Status: Offline
Sonork: 100.1648344
Thanks Meter: 1,448
Success Test Reports


Nokia Asha 305 Logo Restart Done

Code:
Core : v2.23 , BB5XG FlashEngine : v10.1

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm766__07.42.mcusw
PPM : rm766__07.42.ppm_r
CNT : rm766__07.42.image_r_059K901
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.49_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 354648055183501
IMEI 2 : 354648055183519
PCcode : 059P7W4

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\354648055183501_2nd_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm766__07.42.mcusw
Image : rm766__07.42.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x000C0000
Erasing, wait ... 
Erase done, time : 00:00:01 
Write , Start : 0x40060000 , Len : 0x000C0000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40120000 , Len : 0x01AE0000
Erasing, wait ... 
Erase done, time : 00:00:56 
Write , Start : 0x40120000 , Len : 0x01AC4000
Flashing , wait ...
Region flash done, time : 00:00:39
Processing Region 5/5
Erase , Start : 0x43EE0000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
CRC check passed , 0x9E48

   ===Flashing [PPM]===
File : rm766__07.42.ppm_r
Image : package_r.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00800000
Erasing, wait ... 
Erase done, time : 00:00:07 
Write , Start : 0x41C00000 , Len : 0x00677B5C
Flashing , wait ...
Region flash done, time : 00:00:08
CRC check passed , 0x5869

   ===Flashing [CNT]===
File : rm766__07.42.image_r_059K901
Image : package_r_059K901.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42400000 , Len : 0x01AE0000
Erasing, wait ... 
Erase done, time : 00:01:09 
Write , Start : 0x42400000 , Len : 0x00DA0000
Flashing , wait ...
Region flash done, time : 00:00:18
Processing Region 2/2
Erase , Start : 0x43F00000 , Len : 0x00080000
Erasing, wait ... 
Erase done, time : 00:00:01 
No write data, skip
CRC check passed , 0x9993

Flashing done!
Total flash time : 00:03:26
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 305
Software Info:     V 07.42 07-05-13 RM-766 (c) Nokia            
IMEI:  354648055183501
PPM version :   V 07.42 07-05-13 RM-766 (c) Nokia             R
Product code:  059P7W4
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:22
Connect phone on selected interface...


  Reply With Quote
The Following 5 Users Say Thank You to muzammal mudass For This Useful Post:
Show/Hide list of the thanked
Old 02-12-2017, 11:08   #2 (permalink)
Product Supporter
 
Join Date: Jun 2009
Location: private
Posts: 36,417
Member: 1043909
Status: Offline
Thanks Meter: 60,861
Success Test Reports

Dear Sirs,

Here is one more thread for success test reports. I hope your opertaion logs and phone details may helps to users and developers in their work.
Thank you !


Telegram Group
Telegram Group Chat English
Telegram Group Chat Русский #1
Telegram Group Chat Русский #2
Telegram Flash File search
Video Manuals
Facebook Page
Facebook Group

Last edited by YellowBoss; 01-15-2022 at 12:41.
  Reply With Quote
The Following 8 Users Say Thank You to YellowBoss For This Useful Post:
Show/Hide list of the thanked
Old 02-12-2017, 11:14   #3 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,538
Member: 1039903
Status: Offline
Thanks Meter: 2,040
Arrow Nokia 206

Nokia 206 Flashing Done


Code:
Core : v2.25 , BB5XG FlashEngine : v10.3

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm872__04.52.mcusw
PPM : rm872__04.52.ppm_mh2
CNT : rm872__04.52.image_mh2_059Q316_059R9M3_232_01
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm872__04.52.mcusw
Image : rm872__04.52.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:02 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ... 
Erase done, time : 00:00:48 
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:32
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
CRC check passed , 0xFA4D

   ===Flashing [PPM]===
File : rm872__04.52.ppm_mh2
Image : package_mh2.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00680000
Erasing, wait ... 
Erase done, time : 00:00:10 
Write , Start : 0x41A80000 , Len : 0x0051A538
Flashing , wait ...
Region flash done, time : 00:00:06
CRC check passed , 0x956B

   ===Flashing [CNT]===
File : rm872__04.52.image_mh2_059Q316_059R9M3_232_01
Image : rm872__04.52.image_mh2_059Q316_059R9M3_232_01.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42100000 , Len : 0x01D20000
Erasing, wait ... 
Erase done, time : 00:01:06 
Write , Start : 0x42100000 , Len : 0x01200000
Flashing , wait ...
Region flash done, time : 00:00:22
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:02 
No write data, skip
CRC check passed , 0x3F7E

Flashing done!
Total flash time : 00:03:14
Reboot phone now...

Reading Phone Info....
Connected phone -   206
Software Info:     V 04.52 30-06-13 RM-872 (c) Nokia            
IMEI:  355761062413925
PPM version :   V 04.52 30-06-13 RM-872 (c) Nokia             MH2
Product code:  059R9M3
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:03
Connect phone on selected interface...
  Reply With Quote
The Following 5 Users Say Thank You to VIJAY2U2 For This Useful Post:
Show/Hide list of the thanked
Old 02-12-2017, 11:20   #4 (permalink)
No Life Poster
 
ishant's Avatar
 
Join Date: May 2012
Location: InfinityBox CM2
Posts: 614
Member: 1763238
Status: Offline
Thanks Meter: 370
Arrow

Code:
Intex Q7 Format Done with SVC Mode
Code:
Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Insert cable
3. In case of SVC init problems - connect with hold "VolDown" button!

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitSvc Done
Wait for phone...
Sync...
Init Ok , reset settings ... 
Format Ok!
Done
  Reply With Quote
The Following 3 Users Say Thank You to ishant For This Useful Post:
Show/Hide list of the thanked
Old 02-12-2017, 16:41   #5 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,538
Member: 1039903
Status: Offline
Thanks Meter: 2,040
Arrow Nokia 2690

Nokia 2690 Blinking Done


Code:
Core : v2.25 , BB5XG FlashEngine : v10.3

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm635__10.65.mcusw
PPM : rm635__10.65.ppm_mr
CNT : rm635__10.65.image_mr_black
Flashing phone now...
[Gen] Rules accepted for : RAP3x Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
ASIC ID:       000000010000022600010006030C192101033000
CPU ID :       RAP3Gv3 , Features : No any extended features
RAP_PUB:   16B001169BFC015614A00BADF999EF4E45858FDF
CMT_ROOT:  9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
   ===Flashing [MCU]===
Erase : Processing rm635__10.65.mcusw
Found 6 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
Result: 0000
Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:33
Write : Processing rm635__10.65.mcusw
Total 1165 [1165/0/0] blocks to write, writing... 
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:00:54
MCU Write done
   ===Flashing [PPM]===
Erase : Processing rm635__10.65.ppm_mr
Found 1 areas to erase
Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:02
Write : Processing rm635__10.65.ppm_mr
Total 205 [205/0/0] blocks to write, writing... 
TIME : Write time : 00:00:09
PPM Write done
   ===Flashing [CNT]===
Erase : Processing rm635__10.65.image_mr_black
Found 2 areas to erase
Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT
Result: 0000
Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:06:43
Checking content info...
Check Image : Content size is 128k, use direct write mode
Write : Processing rm635__10.65.image_mr_black
Total 488 [488/0/0] blocks to write, writing... 
TIME : Write time : 00:00:23
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:11:48
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 2690
Software Info:     V 10.65 09-12-10 RM-635 (c) Nokia            
IMEI:  353795045073556
PPM version :   V 10.65 09-12-10 RM-635 (c) Nokia             MR
Product code:  0592107
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 0 certs
Uploading User Certificates...
Uploaded 26 certs!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:12:47
  Reply With Quote
The Following 6 Users Say Thank You to VIJAY2U2 For This Useful Post:
Show/Hide list of the thanked
Old 02-13-2017, 07:34   #6 (permalink)
No Life Poster
 
iOS_Shakil's Avatar
 
Join Date: Aug 2015
Location: Bd+
Posts: 2,100
Member: 2441719
Status: Offline
Sonork: uninstall
Thanks Meter: 2,073
Nokia Rm-921 Flash Done................

Code:
Connect phone on selected interface...

Core : v2.25 , BB5XG FlashEngine : v10.3

Selected FlashSettings : Manual
->  File : rm921_14.0.2_059S4B4_m1_2032_02_452463.rofs.fpsx not found! Check it!
File [Ok] : rm921_14.0.6.mcusw.fpsx
File [Ok] : rm921_14.0.2_059S4B4_m1_2032_02_452463.image.fpsx

Dead Mode is Selected 
Waiting for USB device... 
If PC not detect phone - Insert Cable first, then Insert battery 
If stuck on boot  - remove MicroSD card from phone! 
--- Press phone's power button or insert cable & charger! --- 

1st Boot Done, processing booting now
ASIC ID_F     : 00000C2016100040498A2109861C603409A13428
ASIC ID_E     : 00000C2016100040
PUBLIC ID     : 50EEF98AAE3E17F4498A2109861C603409A13428
XGCHIP ID     : 50EEF98AAE3E17F4
ROOT KEY HASH : 125FC72605B5C4E48A9E0225084D2579
ROM ID        : 535882252F54C676

Prepare and send 2nd loader...
2nd boot Ok
Prepare and send Algo loader...
Algo boot Ok

IMEI [1] : 358149054250629
IMEI [2] : 358149054250637
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\358149054250629_XG223_CRT.rpl

PAPUBkeys : 7EC22006F565793C24924878FBAB9CA6CBE42C35


 === SW Version Check === 
- > UPGRADE
 === SW Version Check === 

  === Flashing MCU === 
Processing file : rm921_14.0.6.mcusw.fpsx
Erasing...
Writing...
Total blocks : 82
Writing RKH CRT [ISSW]
Writing RKH CRT [MEMSET]
Writing RKH CRT [PRIMAPP]
Writing RKH CRT [LOADER]
Writing RKH CRT [PASUBTOC]
Writing RKH CRT [PAPUBKEYS] [PAKeys : 7EC22006F565793C24924878FBAB9CA6CBE42C35]
Writing RKH CRT [UPDAPP]
Writing RKH CRT [MCUSW]
File processed Ok, 81 blocks were writen

  === Flashing CNT === 
Processing file : rm921_14.0.2_059S4B4_m1_2032_02_452463.image.fpsx
Erasing...
Writing...
Total blocks : 51
File processed Ok, 51 blocks were writen

Flashing done , total time : 00:00:55
Reboot phone to service mode...

Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 59 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...
  Reply With Quote
The Following 2 Users Say Thank You to iOS_Shakil For This Useful Post:
Old 02-13-2017, 11:14   #7 (permalink)
No Life Poster
 
ishant's Avatar
 
Join Date: May 2012
Location: InfinityBox CM2
Posts: 614
Member: 1763238
Status: Offline
Thanks Meter: 370
Arrow

Code:
Micromax Q346 Format Done by SVC Mode
Code:
Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Insert cable
3. In case of SVC init problems - connect with hold "VolDown" button!

 ====  Wait for phone...

Phone found! [ 34 ]
Port Opened
Sync...
InitSvc Done
Wait for phone...
Sync...
Init Ok , reset settings ... 
Format Ok!
Done
  Reply With Quote
The Following 3 Users Say Thank You to ishant For This Useful Post:
Show/Hide list of the thanked
Old 02-13-2017, 11:16   #8 (permalink)
No Life Poster
 
ishant's Avatar
 
Join Date: May 2012
Location: InfinityBox CM2
Posts: 614
Member: 1763238
Status: Offline
Thanks Meter: 370
Arrow

Code:
LAVA Captain Reset User Lock Done
Code:
Operation : Reset UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 43 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : AE5391E2C890A45D359EB50084066276
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00300000
SDS_INFO : 0x002FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to ishant For This Useful Post:
Old 02-18-2017, 14:23   #9 (permalink)
No Life Poster
 
ishant's Avatar
 
Join Date: May 2012
Location: InfinityBox CM2
Posts: 614
Member: 1763238
Status: Offline
Thanks Meter: 370
Arrow

Code:
Micromax D320 Hang On Logo Done
Code:
======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 118 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040500A29F2612BB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040500A29F2612BB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xE8130045E0B7C2A9936FD39093480545
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : s857_72_kk , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled
Setting : HW verify :  Enabled

Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : Unknown (not supported or without battery)

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x00000000A16C0000
Flash Pre-Erase Done, time used : 00:00:05

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_s857_72_kk.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0015
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:18:40

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : EBR2
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:05

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:19:19
Reconnect Power/Cable!
  Reply With Quote
The Following 3 Users Say Thank You to ishant For This Useful Post:
Show/Hide list of the thanked
Old 02-18-2017, 14:26   #10 (permalink)
No Life Poster
 
ishant's Avatar
 
Join Date: May 2012
Location: InfinityBox CM2
Posts: 614
Member: 1763238
Status: Offline
Thanks Meter: 370
Arrow

Code:
Intex Privacy Lock Done
Code:
Operation : Reset Privacy Lock [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 45010044533130303801BCA94BA83327
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 8001S
[eMMC] : FLASH_CID : 45010044533130303801BCA94BA83327
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xE8130045391EFBF901F5819B3C7DAB70
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Checking data ... 

Process block #1
Process block #2

Privacy Lock reset Ok!

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to ishant For This Useful Post:
Old 02-18-2017, 14:28   #11 (permalink)
No Life Poster
 
ishant's Avatar
 
Join Date: May 2012
Location: InfinityBox CM2
Posts: 614
Member: 1763238
Status: Offline
Thanks Meter: 370
Arrow

Code:
Noki 108 Blinking Done
Code:
Core : v2.24 , MTKx FlashEngine : v10.2

Verify files ... 
MAUI : RM-944_ROM_eMP_20.06.11
VIVA : RM-944_VIVA_eMP_20.06.11
LANG : RM-944_LANG_PACK_ROM_MH_eMP_20.06.11
CUST : RM-944_CUSTPACK_ROM_MH_INDIA_IN_eMP_20.06.11
JMPT : RM-944_JUMP_TABLE_MH_INDIA_IN_eMP_20.06.11
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 29 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : EA76CEB70C36011DE54CD467B30BFA13
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.20.06.11.p4
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000 
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
SecureDecrypt : RM-944_ROM_eMP_20.06.11
SecureDecrypt : RM-944_VIVA_eMP_20.06.11
SecureDecrypt : RM-944_LANG_PACK_ROM_MH_eMP_20.06.11
SecureDecrypt : RM-944_CUSTPACK_ROM_MH_INDIA_IN_eMP_20.06.11
SecureDecrypt : RM-944_JUMP_TABLE_MH_INDIA_IN_eMP_20.06.11
OVRLP : 000069B900000001
PHPID : Bree.20.06.11.p4
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-944_ROM_eMP_20.06.11
Write : RM-944_LANG_PACK_ROM_MH_eMP_20.06.11
Write : RM-944_CUSTPACK_ROM_MH_INDIA_IN_eMP_20.06.11
Write : RM-944_JUMP_TABLE_MH_INDIA_IN_eMP_20.06.11
Write : RM-944_VIVA_eMP_20.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-944_ROM_eMP_20.06.11
[VERIFY] DONE : RM-944_LANG_PACK_ROM_MH_eMP_20.06.11
[VERIFY] DONE : RM-944_CUSTPACK_ROM_MH_INDIA_IN_eMP_20.06.11
[VERIFY] DONE : RM-944_JUMP_TABLE_MH_INDIA_IN_eMP_20.06.11
[VERIFY] DONE : RM-944_VIVA_eMP_20.06.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:09
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:     20.06.11 00-00-00 RM-944
IMEI:  357786060580506
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :   MH
Product code:  059S7M6
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok


Phone disconected!
  Reply With Quote
The Following 2 Users Say Thank You to ishant For This Useful Post:
Old 02-18-2017, 16:58   #12 (permalink)
No Life Poster
 
bright hlatini's Avatar
 
Join Date: Jul 2011
Location: malawi
Posts: 1,121
Member: 1614640
Status: Offline
Thanks Meter: 468
Nokia 105 rm-1134 hang on log done with format

Card found: S/N : xxxxxxxx , v0122
Registered to: xxxxxxxx

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 43 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 9EE2B50B30BCEEB5894789E3B39FDA8C
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : LAGOS61D.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Lagos.fg
DA_VERIFY : 00
DA_JUMP : 00100000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x00368000-0x003F7FFF , LEN : 0x00090000

Executing FFS FORMAT now...
FAT_RANGE : 0x00368000-0x003F7FFF , LEN : 0x00090000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Connect phone on selected interface...
  Reply With Quote
The Following 4 Users Say Thank You to bright hlatini For This Useful Post:
Show/Hide list of the thanked
Old 02-22-2017, 11:28   #13 (permalink)
No Life Poster
 
dey mobiles's Avatar
 
Join Date: Jun 2008
Location: Infront Of My Laptop
Age: 34
Posts: 1,543
Member: 799558
Status: Offline
Thanks Meter: 430
Arrow

Code:
Panasonic ELUGA_I2 Read Patternlock Done
Code:
Operation : Read Pattern/DP Lock [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 460001154D323237F7920042ED32CA90
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D420092F790CA83ED
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xE813004539A64785F3F6C11A64E0127B
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ... 

Get Locks ...
PatternLock Sequnce : 145698

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to dey mobiles For This Useful Post:
Old 02-22-2017, 21:22   #14 (permalink)
No Life Poster
 
Join Date: Oct 2011
Location: Nigeria
Posts: 6,590
Member: 1677653
Status: Online
Thanks Meter: 2,769
NOKIA 305 RM766 REBOOT AFTER DISPLAY LOGO FLASH DONE BY INFINITY BEST
  Reply With Quote
The Following 4 Users Say Thank You to Yusuf Lawal For This Useful Post:
Show/Hide list of the thanked
Old 02-25-2017, 09:03   #15 (permalink)
Freak Poster
 
MTK CHIP's Avatar
 
Join Date: Mar 2010
Location: In Search of free BB5 rpl
Posts: 468
Member: 1248595
Status: Offline
Sonork: 100.1607313
Thanks Meter: 99
NOKIA 220 Hang on logo Easily solve by Just one click... (Format)

Hi,

Got 220 from another shop and he tried flash the phone but not succeed but with BEST in one click phone alive.

Quote:
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 26 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 29C252CADBD114A2CF903083145129FF
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Rivendell.10.03.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000

Executing FFS FORMAT now...
FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Connect phone on selected interface...
THANKX FOR THIS GR8 TOOL.
  Reply With Quote
The Following 2 Users Say Thank You to MTK CHIP For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 13:07.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.28491 seconds with 9 queries

SEO by vBSEO