|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
06-27-2021, 09:00
| #1 (permalink) |
| Product Supporter  Join Date: Jun 2009 Location: private
Posts: 36,475
Member: 1043909 Status: Offline Thanks Meter: 60,926 | Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.13 - Boot RSA Auth activated Core Changed: FlashCore protocol updated Changed: Automatic detection and use loaders with PMTInfo Changed: FlashLoader authentification [RSA and AES] activated ( brand-specific ) - Allow service over FlashMode models, which require remote authentification - Supproted Brand lines: Itel - all RSA-auth enabled models - Supported default prod auth - Generic models, RSA and AES - After sucessfull auth you have full access to any service operations - flash read, write, frp, repair - Feature require Internet access and valid IOS username and password - Feature is free and unlimited for all currently supported models Flasher Changed: Protocol updated Firmware reader Changed: New range of generic and brand-specific models support for safe and complete Firmware Read Changed: NAND support revised Model DB Changed: Moto G20 (XT-2821-X line) included in list (support under test) Other Changed: Some changes and fixes SPD unlock supported models Download link #1 Download link #2 Download link #3 Infinity-Box as nobody else since year 2005          Last edited by YellowBoss; 07-11-2021 at 09:37. |
 |
| The Following 36 Users Say Thank You to YellowBoss For This Useful Post: |
|
06-27-2021, 09:00
| #2 (permalink) |
| Product Supporter Join Date: Jun 2009 Location: private
Posts: 36,475
Member: 1043909 Status: Offline Thanks Meter: 60,926 | Dear Sirs, If you have good flash files and if you want to share it with other users please use IOS File Uploader Tool  Please upload only GOOD WORKING files without password |
| |
| The Following 10 Users Say Thank You to YellowBoss For This Useful Post: |
|
06-27-2021, 11:17
| #4 (permalink) |
| Freak Poster  Join Date: Jun 2013 Location: mexico
Posts: 347
Member: 1958094 Status: Offline Thanks Meter: 57 | Not its free " Feature is free and unlimited for all currently supported models " BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : MANUAL LDR Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : Control transfered! Boot Done! NVMng : SecurityInfo IMEI[1] : 863685040573093 IMEI[2] : 867400020316620 IMEI[3] : 867400020316638 WIFIMAC : FFFFFFFFFFFF BT_MAC : FFFFFFFFFFFF SEC : SLS:2, SKS:0, SKV:0 New SecInfo : IMEI[1] : 352184523621536 NVMng : Using server support Connecting to server... Connected Init... Init: Ok Authenticating... Authenticated Checking Client version... Client version Ok Balance: 0, price:5 Process... Process failed : 62 order failure Disconnected |
| |
|
06-27-2021, 11:45
| #5 (permalink) | |
| Freak Poster Join Date: Jun 2013 Location: mexico
Posts: 347
Member: 1958094 Status: Offline Thanks Meter: 57 | Quote:
5crd for operation Operation : Repair Security [ v2.13 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : MANUAL LDR Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : Control transfered! Boot Done! NVMng : SecurityInfo IMEI[1] : 863685040573093 IMEI[2] : 867400020316620 IMEI[3] : 867400020316638 WIFIMAC : FFFFFFFFFFFF BT_MAC : FFFFFFFFFFFF SEC : SLS:2, SKS:0, SKV:0 New SecInfo : IMEI[1] : 352184523621536 IMEI[2] : 352184523621536 NVMng : Using server support Connecting to server... Connected Init... Init: Ok Authenticating... Authenticated Checking Client version... Client version Ok Balance: 5, price:5 Process... Finished NVMng : Item updated! NVMng : Post-Process Ok! Done! Elapsed: 00:00:33 | |
| |
|
06-27-2021, 12:18
| #6 (permalink) | ||
| No Life Poster   Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | Quote:
Quote:
It allow BOOT new security type phones for free, but not free unlock/repair. | ||
| |
| The Following 4 Users Say Thank You to JayDi For This Useful Post: |
|
06-27-2021, 12:45
| #8 (permalink) |
| Freak Poster Join Date: Apr 2006 Location: harare zimbabwe
Posts: 316
Member: 255977 Status: Offline Thanks Meter: 24 | Card found : 80CB8E77 , v0149 Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13 Load IDBase v8331 Ok! Open : W6502-F3108-10.0-OP-V029-20210408.pac VER : BP_R1.0.0 LEN : 2.68 GiB CPU : sp7731e_1h10 VER : W6502-F3108-10.0-OP-V029-20210408_1645-user Reading package ... Read package finished! Product Brand : Itel Product Device : W6502 Product Model : itel W6502 Product Name : W6502 Patch Level : QP1A.190711.020 Display ID : W6502-F3108-10.0-OP-V029-20210408 Ver. Incmt : OP-V029-20210408 Ver. CodeName : REL Ver. Release : 10 Sec. Patch : 2021-04-05 Build Time : 08.04.2021 Product Name : F3108 Product Device : itel-W6502 Product Info : W6502 Product Board : W6502 Board Platform : sp7731e Product Manfct : itel Operation : Flash Firmware [ v2.13 ] Setting : Update NVRAM : False Setting : Force NVRAM : False Setting : Update PMT : True 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! >>> ERROR : Protocol HandShake failed! >>> Error : Fail to init protocol! >>> Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable! Operation : Flash Firmware [ v2.13 ] Setting : Update NVRAM : False Setting : Force NVRAM : False Setting : Update PMT : True 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : SEC : RSA auth required! FDL : Process authentification ... FDL : SEC : RSA auth passed! FDL : Control transfered! Boot Done! PMTMng : Load PMT PMTMng : 0x28 PMTMng : Update PMT Ok! Prepare target ... ERROR : 0000008E:80000000FF7F7E00 INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL! >>> Error : Flashing failed! >>> Check previous message for more info! Reconnect Power/Cable! Operation : Read FW [ v2.13 ] Extra : Ignore CriticalPart Verify : Enabled 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : SEC : RSA auth required! FDL : Process authentification ... FDL : SEC : RSA auth passed! FDL : Control transfered! Boot Done! >>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" ! >>> Make sure you have made "IDENTIFY" first! Reconnect Power/Cable! Operation : Identify [ v2.13 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : SEC : RSA auth required! FDL : Process authentification ... FDL : SEC : RSA auth passed! FDL : Control transfered! Boot Done! Device info : Product Brand : Itel Product Device : W6502 Product Model : itel W6502 Product Name : W6502 Patch Level : QP1A.190711.020 Display ID : W6502-F3108-10.0-OP-V029-20210408 Ver. Incmt : OP-V029-20210408 Ver. CodeName : REL Ver. Release : 10 Sec. Patch : 2021-04-05 Build Time : 08.04.2021 Product Name : F3108 Product Device : itel-W6502 Product Info : W6502 Product Board : W6502 Board Platform : sp7731e Product Manfct : itel Platform Version: MOCORTM_17C_W20.21.2_P9_Debug Project Version: pike2_pub BASE Version: FM_BASE_17C_W20.21.2_P9 HW Version: sc7731e_modem CMP_Time : 01-28-2021 11:10:37 MODEM TAG : MOCORTM_17C_W20.21.2_P9_Debug_FM_BASE_17C_W20.21.2 _P9_sc7731e_modem_pike2_pub USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***) - > INFO : Remove cable from device to switch it off! Done! Elapsed: 00:01:46 Operation : Flash Firmware [ v2.13 ] Setting : Update NVRAM : True Setting : Force NVRAM : True Setting : SlowSparse Fix : True Setting : Update PMT : True 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! >>> ERROR : Protocol HandShake failed! >>> Error : Fail to init protocol! >>> Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable! Operation : Flash Firmware [ v2.13 ] Setting : Update NVRAM : True Setting : Force NVRAM : True Setting : SlowSparse Fix : True Setting : Update PMT : True 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : SEC : RSA auth required! FDL : Process authentification ... FDL : SEC : RSA auth passed! FDL : Control transfered! Boot Done! PMTMng : Load PMT PMTMng : 0x28 PMTMng : Update PMT Ok! NVRM : pike2_pubcp_PLD_base_nv_nvitem.bin NVMng : Load 0x17 NVMng : Init SRC NVMng : SecurityInfo IMEI[1] : 359471081135014 IMEI[2] : 359471081135014 IMEI[3] : 867400020316638 WIFIMAC : FFFFFFFFFFFF BT_MAC : FFFFFFFFFFFF SEC : SLS:0, SKS:0, SKV:4 NVMng : Backup Ok , 0x00066B50 NVMng : Init DST NVMng : Rx11 : Wx10 NVMng : NVM block updated! Prepare target ... ERROR : 0000008E:80000000FF7F7E00 INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL! >>> Error : Flashing failed! >>> Check previous message for more info! Reconnect Power/Cable! Operation : Flash Firmware [ v2.13 ] Setting : Update NVRAM : True Setting : Force NVRAM : True Setting : SlowSparse Fix : True Setting : Update PMT : True 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : SEC : RSA auth required! FDL : Process authentification ... FDL : SEC : RSA auth passed! FDL : Control transfered! Boot Done! PMTMng : Load PMT PMTMng : 0x28 PMTMng : Update PMT Ok! NVRM : pike2_pubcp_PLD_base_nv_nvitem.bin NVMng : Load 0x17 NVMng : Init SRC NVMng : SecurityInfo IMEI[1] : 359471081135014 IMEI[2] : 359471081135014 IMEI[3] : 867400020316638 WIFIMAC : FFFFFFFFFFFF BT_MAC : FFFFFFFFFFFF SEC : SLS:0, SKS:0, SKV:4 NVMng : Backup Ok , 0x00066B50 NVMng : Init DST NVMng : Rx11 : Wx10 NVMng : NVM block updated! Prepare target ... ERROR : 0000008E:80000000FF7F7E00 INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL! >>> Error : Flashing failed! >>> Check previous message for more info! Reconnect Power/Cable! Operation : Format FS / Reset Settings [ v2.13 ] Mode : Forced [ Format FS / Fix ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : SEC : RSA auth required! FDL : Process authentification ... FDL : SEC : RSA auth passed! FDL : Control transfered! Boot Done! Wipe Ok : Forced Wipe Wipe Ok : Forced Wipe Reconnect Power/Cable! Done! Elapsed: 00:01:51 Operation : Flash Firmware [ v2.13 ] Setting : Update NVRAM : True Setting : Force NVRAM : True Setting : SlowSparse Fix : True Setting : Update PMT : True Setting : WholeFLASH FORMAT : True 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : SEC : RSA auth required! FDL : Process authentification ... FDL : SEC : RSA auth passed! FDL : Control transfered! Boot Done! ERASE : FORMAT WHOLE FLASH ... ERASE : FORMAT FLASH Completed! PMTMng : Load PMT PMTMng : 0x28 PMTMng : Update PMT Ok! NVRM : pike2_pubcp_PLD_base_nv_nvitem.bin NVMng : Load 0x17 NVMng : Init SRC NVMng : Trying use recover mode NVMng : Security DAMAGED! NVMng : Backup Ok , 0x00100000 NVMng : Trying use recover mode NVMng : Init DST NVMng : NV has been destroyed! Forced Update enabled! Repair security after! NVMng : NVM block updated! Prepare target ... ERROR : 0000008E:80000000FF7F7E00 INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL! >>> Error : Flashing failed! >>> Check previous message for more info! Reconnect Power/Cable! Operation : Flash Firmware [ v2.13 ] Setting : Update NVRAM : False Setting : Force NVRAM : False Setting : Update PMT : False 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : SEC : RSA auth required! FDL : Process authentification ... FDL : SEC : RSA auth passed! FDL : Control transfered! Boot Done! Prepare target ... ERROR : 0000008E:80000000FF7F7E00 INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL! >>> Error : Flashing failed! >>> Check previous message for more info! Reconnect Power/Cable! flashing failed any help |
| |
| The Following User Says Thank You to lgarapo For This Useful Post: |
|
06-27-2021, 13:05
| #11 (permalink) |
| Freak Poster Join Date: Apr 2006 Location: harare zimbabwe
Posts: 316
Member: 255977 Status: Offline Thanks Meter: 24 | another device w6503 error on flashing Operation : Flash Firmware [ v2.13 ] Setting : Update NVRAM : False Setting : Force NVRAM : False Setting : Update PMT : True 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : W6503-F3115-10.0-OP-V022-20201230_1850_user.pac Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : SEC : RSA auth required! FDL : Process authentification ... FDL : SEC : RSA auth passed! FDL : Control transfered! Boot Done! PMTMng : Load PMT PMTMng : 0x28 PMTMng : Update PMT Ok! Prepare target ... ERROR : 0000008E:00000000FF7F0000 INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL! >>> Error : Flashing failed! >>> Check previous message for more info! Reconnect Power/Cable! Last edited by lgarapo; 06-27-2021 at 13:14. |
| |
|
06-27-2021, 15:34
| #12 (permalink) |
| No Life Poster Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | @lgarapo, don't smash buttons for fun. Is second one alive? It wont flash it, because not accept / can't verify signatures. 1. Try flash just UBOOT and SPL. 2. Try read FW from alive one and reflash to faulty. Let us know results after. 3. Try with V026 also (on support), to check. |
| |
| The Following 3 Users Say Thank You to JayDi For This Useful Post: |
|
06-27-2021, 21:19
| #13 (permalink) | |
| Product Supporter Join Date: Jun 2009 Location: private
Posts: 36,475
Member: 1043909 Status: Offline Thanks Meter: 60,926 | Quote:
UNLOCK is not free (as before) for newest models. If you do not know the difference please read info and learn before post. Thank you! | |
| |
| The Following User Says Thank You to YellowBoss For This Useful Post: |
|
06-27-2021, 21:20
| #14 (permalink) |
| Product Supporter Join Date: Jun 2009 Location: private
Posts: 36,475
Member: 1043909 Status: Offline Thanks Meter: 60,926 | @kamrulsohan Fake news not allowed here Your fake news post was deleted. Do not forget to use "?" sign if you ask a question and use search before post. Thank you! |
| |
| The Following User Says Thank You to YellowBoss For This Useful Post: |
|
06-28-2021, 03:47
| #15 (permalink) |
| Major Poster Join Date: Apr 2011 Location: kampala
Posts: 44
Member: 1563468 Status: Offline Sonork: featuring Thanks Meter: 9 | Hello infinity team , i have a working ios account with my infinitybest, can i still login with that account on cm2sp2 as my auth |
| |
| The Following User Says Thank You to kisekka For This Useful Post: |
|
| Bookmarks |
| |
|
|
Linear Mode
