<b>Infinity-Box</b>Telegram GroupYouTubeFacebook Group

Last 6 months Last 1 year Last 2 years Last 5 years Last 10 years Recently updated files



2022-12-05 Infinity #CM2SP2 boot pack v1.15 released with updated loaders

[+] ATouch
[+] BQ
[+] CallTouch
[+] Dexp
[+] Eager
[+] iHunt
[+] InnJoo
[+] Invens
[+] LiteTel
[+] LYF-Jio
[+] MyPhone
[+] Realme
[+] Samsung
[+] Smart

Read more here

2022-11-01 Infinity #CM2SP2 boot pack v1.14 released with updated loaders

[+] Colors
[+] Hotwav
[+] Mint
[+] Mobicel
[+] Strawberry

Read more here

2022-10-17 Infinity #CM2SP2 boot pack v1.13 released with updated loaders

[+] BQ
[+] Digma
[+] Fly
[+] Haier
[+] Inoi
[+] Irbis
[+] iTel
[+] Prestigio
[+] ZTE

Read more here

2022-10-11 Infinity #CM2SP2 boot pack v1.12 released with updated loaders

[+] Huawei
[+] /boot-fdl/ has FDL loaders:
- Blackview
- Blu
- BMobile
- Infinix
- iTel
- Lenovo
- Maxwest
- Realme
- Tecno
- Yezz
- ZTE

Read more here

2022-10-07 Infinity Chinese Miracle-2 #CM2MT2 v2.37 - general improvements and fixes [Firmware v0153]

- "Restore Backup" config mode updated
- "Restore Backup" allow to select files manually
- Flash file (Scatter) Open|Select|Clean buttons at "Flash" page
- Flash file (Scatter) parser updated
- Flash file (Scatter) selection issue fixes
- MemoryTool file selection issue fixes
- MemoryTool gui minor changes
- "Switch to HS USB" option removed
- Config storage engine updated
- Account Check gives balance and subscription date
- "PMT Info" config value stored
- "Flash" page minor gui changes
- Loaders remote verification revised
- Installer updated to manage previously installed boot-pack
- Required Dongle firmware version: 0153

Read more here

2022-10-04 Infinity Chinese Miracle-2 #CM2MT2 v2.36 - general improvements and fixes [Firmware v0153]

- SmartInfo parser output revised
- NVRAM parser output revised
- Firmware remote verification enabled
- Device remote verification enabled
- Preloader parser revised and fixed
- Peloader remote verification enabled
- "KG State" moved to Service page
- "Help" menu
- View log files by right mouse click on message window
- View log files via "File" menu
- "Logs" button at main window to view log files
- "Snap" button at main window to make screenshot
- "Stop" button at main window
- Verification for preloader|da|firmware integrity
- Show current settings at operation start
- Show "Local SLA" state at operation start
- Show "Flash Write" settings at operation start
- "HW Report" mode selection changed
- "Check Account" button at "Settings" page to verify Username and Password validity
- Loaders remote verification enabled
- Show loaders information at boot time
- Memory chip life-state warnings updated
- "Stop" item removed from the top menu
- Boot stage loader files information revised
- "GUI Mode" item removed from the top menu and moved to "View" button
- "Memory Tool" moved to "Service" page
- "Make Service Report" moved to "Service" page
- "Settings" -> "Firefy : EMI" menu item moved to "FireFly : AutoEMI" at "Settings" page
- "GUI mode" save/restore on startup
- "Change GUI mode" via "Settings" menu
- HW Compatibility Wizard enabled
- Server Hints engine enabled
- "PMT Info" option at "Platform" page display Partition Info during "Identify"
- "Save Boot Config" option at "Platform" page to store detected model config to models list
- Required Dongle firmware version: 0153

Read more here

2022-09-20 Infinity #CM2MT2 boot pack v2.35 released with updated loaders

Loaders updated & structure improved

[+] MT6771 experimantal loader [0_base]

Every new boot-pack release has all previous boot-packs included, it means you should only install latest one to get all loaders

Read more here

2022-09-11 Infinity #CM2SP2 boot pack v1.11 released with updated loaders

[+] Ais
[+] BQ
[+] Expert
[+] FinePower
[+] Ginzzu
[+] Micromax
[+] Oysters
[+] Philips
[+] Stark
[+] teXet
[+] Vertex

Read more here

2022-08-30 Infinity Chinese Miracle-2 #CM2MT2 v2.35 - general improvements and fixes [Firmware v0153]

[*] Internal changes and fixes for protocols applied
[*] Internal changes and fixes for flasher applied
[*] Internal changes and fixes for preloader parser applied
[*] Preloader database handling updated
[*] Preloader database remote verification enabled by default
[*] Log engine updated: log files created for each session and stored to /log/ directory
[*] Deep Info parser enabled by default
[*] User Interface updated
[*] Product-specific Loader [DA] files moved to CM2MT2-boot-pack
[*] Required Dongle firmware version: 0153

Read more here

2022-08-16 Infinity #CM2SP2 boot pack v1.10 released with updated loaders

[+] G-Touch
[+] Hotwav
[+] Infinix
[+] Mito
[+] Mobicel
[+] QC-QcTech
[+] Realme
[+] Symphony
[+] Stylus
[+] ZTE

Read more here

2022-06-27 Infinity Data Explorer v1.12 - MTK, SPD updated and more improvements [Firmware v0100]

Data extraction based on full reconstruction of file system

- MTK firmware structure detection improved
- SPD firmware structure detection improved
- Minor bugs fixed

Read more here

2022-06-19 Infinity #CM2SP2 boot pack v1.09 released with updated loaders

[+] Condor
[+] HiSense
[+] Kiowa
[+] Lava
[+] Micromax
[+] Stylo

Read more here

2022-06-05 Infinity #CM2MT2 boot pack v2.33 released with updated loaders

loaders updated & structure improved

[+] Huawei

Read more here

2022-06-04 Infinity #CM2SP2 boot pack v1.08 released with updated loaders

[+] iTel

Read more here

2022-05-31 Infinity #CM2SP2 boot pack v1.07 released with updated loaders

[+] Blackfox
[+] Ginzzu
[+] Hotwav
[+] iGet
[+] Infinix
[+] Movitel
[+] Nobby
[+] Symphony
[+] Teclast

Read more here

2022-05-27 Infinity #CM2MT2 boot pack v2.32 released with updated loaders

loaders updated & structure improved

[+] Lenovo
[+] Meizu
[+] Moto
[+] Oppo
[+] Oukitel
[+] QSmart
[+] Realme
[+] Symphony
[+] TP-Link Nefos
[+] Umidigi
[+] Vivo
[+] Xiaomi

Read more here

2022-05-26 Infinity #CM2MT2 boot pack v2.30 released with updated loaders

[+] Alldocube
[+] Allview
[+] Avvio
[+] Azumi
[+] BlackFox
[+] Blu
[+] Cloudfone
[+] GeneralMobile
[+] Hyundai
[+] Infinix
[+] Infocus
[+] Injoo
[+] iTel
[+] Jazz
[+] Leagoo

Read more here

2022-05-23 Infinity #CM2 and [BEST] Pinout database v2.09 released

[+] ISP pinouts included
[+] pinouts
[+] test-points
[+] other information

Read more here

2022-05-21 Infinity #CM2SP2 boot pack v1.06 released with updated loaders

[+] Akai
[+] Alcatel-TCL
[+] Archos
[+] Benco
[+] Blu
[+] BMobile
[+] BQ
[+] Dany
[+] Dexp
[+] Digma
[+] FinePower
[+] Fly
[+] GFive
[+] Griffe
[+] Huawei
[+] Hurricane
[+] iGET
[+] Infinix
[+] InnJoo
[+] Inoi
[+] Inovacel
[+] Invens
[+] iPro
[+] Irbis
[+] iTel
[+] Kimfly
[+] Krip
[+] Lava
[+] Mafe
[+] Maxfone
[+] Meizu
[+] Micromax
[+] Mobicel
[+] Movitel
[+] MyPhone
[+] Nobby
[+] Philips
[+] Prestigio
[+] QMobile
[+] Revo
[+] Rover
[+] Safaricom
[+] Skycell
[+] Symphony
[+] Tecno
[+] Telcast
[+] Telenor
[+] Tesla
[+] TP-Link_Neffos
[+] UMax
[+] VFone
[+] Volte
[+] Wiko
[+] Xiaomi
[+] Yezz
[+] Yuho
[+] Ziox
[+] Zong
[+] ZTE

Read more here

2022-05-18 Infinity #CM2SP2 boot pack v1.05 released with updated loaders

[+] Alcatel-TCL
[+] Alldocube
[+] Benco
[+] BQ
[+] Doogee
[+] HiSense
[+] Infinix
[+] Inoi
[+] iTel
[+] Maxwest
[+] Micromax
[+] Symphony
[+] ZTE
[~] incompatible loaders clearance

Read more here

2022-05-16 Infinity #CM2SP2 boot pack v1.04 released with updated loaders

[+] Cheers
[+] Condor
[+] Gelsi
[+] GFive
[+] Goodone
[+] Hena
[+] HiTech
[+] Hotwav
[+] Huskee
[+] iBall
[+] iKon
[+] Impression
[+] i-life
[+] Intex
[+] Jazz
[+] Jinga
[+] Karbonn
[+] Krip
[+] Kimfly
[+] KTouch
[+] KuXing
[+] Leagoo
[+] Lemon
[+] Lenovo
[+] LYF-Jio
[+] Manta
[+] Mascom
[+] Maxx
[+] Micromax
[+] Midas
[+] Mifaso
[+] Mobicel
[+] Movitel
[+] Motorola
[+] MTech
[+] MyPhone
[+] Nomi
[+] Philips
[+] Prestigio
[+] QMobile
[+] Qnet
[+] Rage
[+] Reach
[+] Reeder
[+] Sansui
[+] Simtronics
[+] SmartMax
[+] Spice
[+] Symphony
[+] Swipe
[+] Tecno
[+] Texet
[+] True
[+] Umidigi
[+] Vertex
[+] VFone
[+] Videocon
[+] Winds
[+] Wynncom
[+] Zears
[+] Zen

Read more here

2022-05-15 Infinity #CM2MT2 boot pack v2.29 released with updated loaders

[+] Huawei
[+] Lenovo
[+] Moto
[+] Oppo
[+] Tecno
[+] Wiko

Read more here

2022-05-14 Infinity #CM2MT2 boot pack v2.28 released with updated loaders

[+] Assistant
[+] CCIT
[+] HiSense
[+] Infinix
[+] Micromax
[+] Prestigio
[+] Xiaomi

Read more here

2022-05-13 Infinity #CM2MT2 boot pack v2.27 released with updated loaders

[+] iTel
[+] Mobicel
[+] Mobiwire-Vodacom
[+] Panasonic
[+] QMobile
[+] Ulefone
[+] Vodafone

Read more here

2022-05-12 Infinity #CM2MT2 boot pack v2.26 released with updated loaders

[+] Alcatel
[+] Asus
[+] Gionee
[+] Helio
[+] Meizu
[+] Neon

Read more here

2022-05-06 Infinity #CM2MT2 boot pack v2.25 released with updated loaders

[+] BQ
[+] Fly
[+] HiSense
[+] HTC
[+] Ibrit
[+] Lava
[+] Nubia
[+] Vivo
[+] ZTE

Read more here

2022-05-05 Infinity #CM2MT2 boot pack v2.24 released with updated loaders

[+] Huawei
[+] Oppo
[+] Tecno

Read more here

2022-04-30 Infinity #CM2MT2 boot pack v2.23 released with updated loaders

[+] Blu
[+] Comio
[+] Condor
[+] Doogee
[+] Fero

Read more here

2022-04-27 Infinity #CM2SP2 boot pack v1.03 released with updated loaders

[+] Arise
[+] BQ
[+] Celkon
[+] Cell-C
[+] HiSense
[+] Infinix
[+] Irbis

Read more here

2022-04-26 Infinity #CM2SP2 boot pack v1.02 released with updated loaders

[+] BlackView
[+] Digma
[+] Huawei
[+] QMobile
[+] ZTE

Read more here

2022-04-25 iosFileUploader v1.16 released

- post-upload file verification
- minor fixes

Read more here

2022-04-24 Infinity #CM2MT2 boot pack v2.22 released with updated loaders

[+] Acer
[+] Archos
[+] Blackview
[+] Oppo
[+] Realme
[+] Xiaomi

Read more here

2022-04-22 Infinity #CM2SP2 boot pack v1.00 released

Infinity #CM2SP2 boot pack has more than 400 loaders for many different brands and models

Read more here

2022-04-07 DongleManager v1.91 released

[+] Infinity Account Reset - password and e-mail update with dongle
[*] User interface changes
[*] Error reporting engine updated

2022-04-06 Infinity #CM2 and [BEST] Pinout database v2.08 released

[*] boot keys
[*] pinouts
[*] test-points
[*] hardware types
[*] keyboard codes
[*] other information

Read more here

2022-03-15 Infinity Chinese Miracle-2 CM2MT2 v2.34 - OP and RMX extra stuff [part 1/2] [Firmware v0153]

As ordinary unique #CM2 functions and methods released

Core
Changed: Protocol updated RAPHAEL/LEGACY

MemoryTool
Changed: Init GPT operations optimized
Changed: RPMB operations optimized

Flasher
Changed: Protocol updated (RAPHAEL)
Changed: UltraFlash protocol updated
Changed: OFP direct support activated ( oppo and realme )
- Support normal and unmerged firmwares
- Support region selection for unmerged firmwares
- Make normal scatter as result FW

Service
Changed: "Smart Reset" optimized
- Fixed issues with some A/B devices - Nokia, Tecno and similar models may be affected
Changed: "Smart Reset Extra" option optimized
- Fixed issues with some A/B devices - Nokia, Tecno and similar models may be affected
- Smart Reset Extra updated: Improved Samsung support for Reset/Change KG
Changed: Identify operation improved
Changed: FixDL operation now support also fix Oppo and Realme devices "black screen" with DL error
- Fix "download not completed" error
- Fix device production and operation state in case of flash erase or other fails
- Fix device ocdt params in case of erase or after factory cdt download
- Just run FixDL and software will make all automatic
- In some case (f.e. device with multi-config and "new" type) operation may require device reflash with correct files

Firmware Reader
Changed: Core optimized
Changed: Android 12 initial support
Changed: Internal DB update

Forensic
Changed: "Smart Reset Data Safe" operation optimized
- OPPO : Engine has been rebuild to "safe" mode (no factory reset in case of unsupported version/config)
- OPPO : Confirmed and working with "original" manufactured models - A15, A5s and similar devices
- OPPO : Not work with OEM-made models - A1k and similar devices

Other
Changed: FireFly : Sparse flashing optimized, modern images are supported now
Changed: Samsung KG : Separate change state button activated, kg operations optimized
Changed: Many importnatn internal changes, bugfixes and improvements

Read more here

2022-03-06 Tecno files at Infinity #CM2 support

CD6, CD6j, CD6s, CD7, CD8, CD8j, CE7, CE7j, CE8

2022-03-01 Infinity #CM2 and [BEST] Pinout database v2.07 released

- boot keys
- pinouts
- test-points
- hardware types
- keyboard codes
- other information

2022-02-24 iTel files at Infinity #CM2 support

IT2050V, IT2090, IT2100, IT2100S, IT2110, IT2120, IT2123, IT2123V

Read more here

2022-02-20 Tecno files at Infinity #CM2 support

CA7, CA8, CA8S, CB7, CB7j, CC6, CC7, CC7S, CC9

Read more here

2022-02-14 How to use Infinity CM2 or [BEST] Dongle with usb/network/remote sharing and debugger tools

Read more here

2022-02-09 Infinity Chinese Miracle-2 CM2MT2 v2.33 - New repair and service features [Firmware v0152]

As ordinary unique #CM2 functions and methods released

Core
Changed: Protocol updated (RAPHAEL/LEGACY)
Changed: FireFly OverDA has been updated

MemoryTool
Changed: MemoryTool rebuild
Changed: Activated "Restore Backup" with security only mode
Changed: Activated "Open active folder" button
Changed: Activated Init GPT from binary file
Changed: RPMB operations optimized
Changed: RPMB unificated type detection ( "swapable" types even on programmed RPMB )

Flasher
Changed: Protocol updated (RAPHAEL)
Changed: UltraFlash protocol updated
Changed: Renamed "Check HW" to "Check Compatibility"
- Now software check also compatibility between selected firmware and phone firmware sides
- You will see a warning about any issues with incompatible combinations, which may lead to device/security damage
- in case of enforced flashing can be used "Restore Backup" to recover security data (with enabled Security Only" option)
Changed: Backup option during flashing enforced by default

Service
Changed: "Smart Reset" rebuild
Changed: "Smart Reset Extra" rebuild
- Smart Reset Extra updated: Improved Huawei Account reset ( "old types" and "modern types" supported )
- Smart Reset Extra updated: Improved Samsung support : Reset/Change KG
Required mode can be changed in software Settings tab!
- Factory Reset : FRP reset only option updated, now brand-indepedent ( If need reset FRP only, without Smart-ones )
- Factory Reset : FullFactory[1] and Factory[2] methods issues can be reset by other methods ( "No recovery command" issue )
- Factory Reset : Optimized latest firmwares-devices settings detection
Changed: Identify operation improved
Changed: Restore Backup option improved : ability to restore "security" only items instead of full range (by enabling "Security Only" checkbox)

Other
Changed: GUI changes : MemoryTool menu, Dialogs, GUI fixes on older OS types
Changed: Many importnatn internal changes, bugfixes and improvements
Changed: RPMB with "type3" supported - unique feature, see the power

Read more here

2022-02-08 Infinix files at Infinity #CM2 support area

X625B, X625C, X625D, X626, X626B, X627, X627V, X627W, X650, X650B, X650C, X650D

How to upload files to support

Read more here

2022-02-05 iTel files at Infinity #CM2 support

IT1508, IT1508+, IT151, IT1516+, IT1520, IT1556, IT1556+, IT1655, IT1702, IT1703

Read more here

2022-02-01 Infinix files at Infinity #CM2 support area

X609, X609B, X610B, X612, X612B, X620, X620B, X622, X623, X624, X624B

Read more here

2022-01-19 Infinity #CM2 and [BEST] Pinout database v2.06 released

- boot keys
- pinouts
- test-points
- hardware types
- keyboard codes
- other information

2022-01-18 Tecno files at Infinity #CM2 support

B1, B1f, B1g, B1p, B1s, B2, BA2, BB2, BB4, BB4k, BC1, BC1s, BC2, BC2c

Read more here

2022-01-15 Infinix files at Infinity #CM2 support area

X572, X573, X600, X601, X602, X603, X604, X605, X606, X606B, X606C, X606D

Read more here

2022-01-10 Infinix files at Infinity #CM2 support area

X5516C, X551, X552, X553, X554, X555, X556, X557, X559, X571

2022-01-08 Tecno files at Infinity #CM2 support

7CS, 8H, A52Lite, A52SLite, A675, A6, A710, A9, AB7, AC8, AX8, AX8S

2022-01-06 iTel files at Infinity #CM2 support

A611WP, ACE2, IT1406, T1407, IT1408, IT1409, IT1452, IT1503, IT1508

2022-01-06 iTel files at Infinity #CM2 support

A45, A507LS, A509W, A52, A52B, A571L, A571LL, A571W, A611W

2022-01-04 iTel files at Infinity #CM2 support

A31, A31-Plus, A32F, A40, A42-Plus, A43, A44, A44-Power, A44-Pro

2022-01-03 iTel files at Infinity #CM2 support

A16, A16Plus, A16S, A20, A22, A23, A23A, A23F, A23S

2022-01-02 Save blue Elefants and pink Whales!

Stop to produce tons of your display photos! Get this tool and make screenshots.

2022-01-02 Infinix flash files at Infinity #CM2 support

X522, X5511, X5514, X5515, X5515F, X5516, X5516B

2022-01-01 iTel flash files at Infinity #CM2 support

A11, A12, A14, A14S, A15, A15R

2021-12-30 Infinix flash files at Infinity #CM2 support

PR652B, PR652C, X507, X509, X510, X521, X522

2021-12-24 Infinity Chinese Miracle-2 CM2MT2 v2.32 - RPMB, more Repair & Service features [Firmware v0151]

As ordinary unique #CM2 functions and methods released

Core
Changed: FireFly loaders has been updated
Changed: FireFly DA loaders has been updated
Changed: RPMB operations activated - Read, Write, Erase
- Supported SoC: MT6739, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6781, MT6785, MT6799, MT6833, MT6853, MT6873, MT6877, MT6885, MT6893
- Fast: 1 | 2 minute for 16MB on eMMC and UFS on Read | Write & Erase
- Easy and Safe: automatic backup at service cases, data verification

MemoryTool
Changed: MemoryTool rebuild
Changed: Activated RPMB operations menu
- Allow Read RPMB memory
- Allow Write RPMB memory
- Allow Wipe RPMB memory

Service
Changed: "SmartReset" rebuild
- Smart Reset Extra updated: support Huawei Account reset: EMUI 9-10
- SmartReset in DataSafe mode check and warn about "fixed" devices, where data loss possible
Changed: Identify operation improved
Changed: Repair Security
- Repair security now support VIVO devices
- Repair case select automatic, not need select / choose / do anything extra.
New Feature: ServiceReport: Allow read device-specific data and send to R&D team directly: Menu -> Extra -> Make ServiceReport
This option helps to collect hardware database and improve device detection process.

Other
Changed: GUI changes : MemoryTool menu, Dialogs
Changed: Many importnatn internal changes, bugfixes and improvements

Read more here

2021-12-23 DTPro Tool Activation Codes available via Infinity Online Service

DTPro Tool Activation Codes available via Infinity Online Service

2021-12-17 Infinity Pinout database v2.05 released

Database contain:
- boot keys
- pinouts
- test-points
- hardware types
- keyboard codes
- other useful information

NOTE: Installation path for this database is /pinout2/ and legacy database at /pinout/ can be deleted manually

2021-12-07 Infinity Chinese Miracle-2 CM2MT2 v2.31 - New features activated [Firmware v0151]

Core
Changed: Activated FireFly over DA
! Support latest UFS-based SoC : MT6781, MT6785, MT6779, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893
! Support eMMC-based SoC : MT6739, MT6757, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6797, MT8167
! Supported operation : Generic MTK + Bootloader Unlock is available now for all latest SoC

FireFly
FireFly: NewSOC: MT6753 [Legacy]
FireFly: Bootloader Unlock activated for LEGACY phones
! Support for now: MT6580, MT6737 ( tested and confirmed as working )

Current list of supported SoC:
Legacy : MT6580, MT6735, MT6737, MT6753
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771

!! EOL info and other HW stuff also shown for LEGACY
!! On LEGACY devices in most cases UserData encryption can be not set.
!! FireFly allow boot/read even for devices with dead DRAM - no need desolder eMMC for data recovery!

Flasher
Changed: UltraFlash engine updated

Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: Vivo, Oppo, Realme - firmware naming optimized - model, type, internal versioning etc.

MemoryTool
Changed: MemoryTool rebuild
Changed: Activated "Make Backup" option
Changed: Activated "Restore Backup" option

Service
Changed: "SmartReset" rebuild
!Remove flyme account improved ( meizu )
!Reset FRP may fail on some devices, fixed
!Improved work in FireFly mode
!Improved compatibility with old Android(4 - 7) versions
Changed: Security info reading improved
Changed: Reset PrivacyLock activated under FireFly mode
Changed: Backup ext_csd data during Identify under FireFly mode
Changed: Bootloader Unlock rebuild (FireFly / Generic)
Changed: Bootloader Unlock activated for more SoC : MT6757, MT6781, MT6785, MT6779, MT6797, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893, MT8167
Changed: Bootloader Unlock activated for more SoC : MT6580, MT6737

Other
Changed: Many internal changes and bugfixes

Read more here

2021-12-07 iosFileUploader v1.14 released

- file size detection bug fixed
- minor UI changes

Read more here

2021-12-03 Infinity Device & SoC database

Device & SoC database now available right at Infinity main web page

Read more here

2021-11-30 iosFileUploader v1.11 released

- upload engine updated
- config storage updated
- minor UI changes

Read more here

2021-11-26 Infinity Chinese Miracle-2 CM2MT2 v2.30 - More models & Features [Firmware v0151]

Core
Changed: Protocol updated for Raphael / Legacy platforms
Changed: FireFly / Infinity DA (Download Agents) updated

FireFly
FireFly: NewSOC: MT6580 [Legacy]

Current list of supported SoC:
Legacy : MT6580, MT6735, MT6737
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771

!! EOL info and other HW stuff also shown for LEGACY
!! On LEGACY devices in most cases UserData encryption can be not set
!! FireFly allow boot/read devices even with dead DRAM - no need to desolder eMMC for data recovery!

Flasher
Changed: UltraFlash engine updated

Firmware Reader
Changed: New types supported
Changed: Internal Database updated

MemoryTool
Changed: UltraFlash activated by default, no more any write restrictions
Changed: Read/Write/Erase operations revised

Service
Changed: "SmartReset" updated for Legacy and old Raphael lines
Changed: "SmartReset Extra" updated
Changed: "SmartReset Data Safe" option activated
Remove all APP and Security settings, retain userdata for Vivo, Oppo.
It works for limited number of models at the moment, it depend on android version/build, use at own risk!
Brand/model selection is not required, autodetection works

Other
Changed: Many different general changes and fixes applied

Read more here

2021-11-23 Infinity Chinese Miracle-2 CM2MT2 v2.29 - MT6781, A/B Reader and more [Firmware v0151]

As ordinary, unique functions and methods released

Core
NewSOC : MT6781 supported - any security state - SLA, DAA, Plain
Changed: Protocol updated for Raphael / Legacy platforms
Changed: FireFly / Infinity DA (Download Agents) updated
Agent : DA v2136 skipped, unstable

FireFly
FireFly: NewSOC: MT6735 [Legacy]
FireFly: NewSOC: MT6737 [Legacy]

Current list of supported SoC:
Legacy : MT6737, MT6735
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771

!! EOL info and other HW stuff also shown for LEGACY
!! In most cases on LEGACY devices UserData encryption can be not set.
!! FireFly allow boot/read even devices with dead DRAM. No need to desolder eMMC for data recovery!

Flasher
Changed: UltraFlash engine updated
Changed: Flash engine updated

Firmware Reader
Changed: A/B devices support activated!
! Android 10/11/12 with A/B slots processing is now supported
! Read FW is completely like factory one!
! Read FW is NOT damage anything on device! ( FOTA, A/B switch and other )
! Read FW is NOT read "broken" slots = no any further issues!
! Read FW identify active/alive slots = always WORKING firmware, extremely reduse FW size ( for ABv1 )
Changed: Database rebuild. Branded : Support most of modern LG, Oppo, Samsung, Vivo, Infinix, Tecno and other brands.
! All this is completely safe and factory-like firmwares!
Changed: Database rebuild. Unbranded : Many "noname" and small brands supported now as well.
! All this is completely safe and factory-like firmwares!
Changed: New types supported
Changed: Internal Database updated
Changed: MT6781 support

Service
Changed: "SmartReset" updated for Android 10/11 devices.
Changed: "SmartReset Extra" updated
Changed: "Identify" operation now show more device info
Changed: Restore Backup operation has been updated
Changed: SPUnlock updated. Unsupported types reporting activated if user enable that option

Other
[+] About 200 different general changes and fixes applied to algorithms and methods
[+] Software Update checker feature enabled

Read more here

2021-10-29 Infinity Pinout database v2.04 released

Information about boot keys, pinouts, test-points, hardware updated
NOTE: pinout v2.04 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there

2021-10-23 Support area with flash files updated

iTel firmware ready for download from Infinity support: W6003, W6004, W6004P, W6501, W6502, W6503, W7001, W7002, W7002P

2021-10-18 Support area with flash files updated

iTel firmware ready for download from Infinity support: W5006X, W5008, W5503, W5504, W5505, W6001, W6002, W6002E

2021-10-09 Support area with flash files updated

iTel firmware ready for download from Infinity support: W4002, W4003, W5001P, W5002, W5003, W5004, W5005, W5005P

2021-10-06 Support area with flash files updated

iTel firmware ready for download from Infinity support: S21, S31, S32, S32-Lite, S33, S41, S42, SA7, W4001O, W4001P, W4001S

2021-09-25 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.14 - A/B support and more [Firmware v0150]

As ordinary, unique functions and methods released

Core
Changed: FlashCore protocol updated - R25.x
Changed: New DL-core support - v20 at Infinity notation
Changed: Diag protocol updated
Changed: 1S base loaders for SC7731e - AB devices, Android 10/11
Changed: 1S loaders line included for SC9832e - AB devices, Android 10/11
Changed: 1S loaders line included for SC9863 - AB devices, Android 10/11
Info: It's recommended to use 1S loaders for Identify operation on older UniSoc lines - SC7731e, SC9832e, SC9863 with Android 9 - 10

Changed: FlashLoader authentification [RSA and AES] - brand-specific operation
- Allow service over FlashMode models, which require remote authentification
- New model lines activated (server-side): Tecno, Infinix
- Supproted Brand lines: Itel, Infinix, Tecno, Generic

Flasher
Changed: Protocol updated
Changed: FlashCore update
Changed: A/B flashing activated (Infinity Packages, factory PAC)
Changed: PAC r2.x line support updated
Changed: Infinity Packages flashing revised

Service
Changed: FormatFS updated
Changed: NVMManager updated - NV Read, Write, Update
Changed: RepairSecurity updated: SN repair
Changed: RepairSecurity updated: ServerSupport models list increased, more Android 10/11 supported

Firmware reader
Changed: Android 10, 11 specific changes
Changed: UltraRead protocol updated
Changed: Loader compatibility selection optimized
Changed: A/B devices support activated!
- Allow read complete, working, safe and factory-like firmware images for most modern Android 10/11 devices!
- No any FOTA, security and other issues with read FW, no any unique data damage
- Automatic active slot identification and selection, with no chances to read useless firmware and also save 2x HDD space for old AB

Model DB
Changed: New generic loaders included for SC7731e - 1S line, v20
Changed: New generic loaders included for SC9832e - 1S line, v20
Changed: New generic loaders included for SC9863 0 1S line, v20
Changed: New generic loaders included for T618 - 1S line, v20
Changed: New loaders included for Realme
Changed: New loaders included for Itel
Changed: New loaders included for Tecno
Changed: New loaders included for ZTE

Other
Changed: LoaderDB updater now supports modern PACs - A/B, modern R2.x
Changed: Many other different changes and fixes

Read more here

2021-09-24 Support area with flash files updated

iTel firmware ready for download from Infinity support: P51, P861L, S11, S11+,S11-Pro, S11X, S11XB, S12, S13, S13-Pro

2021-09-19 Support area with flash files updated

iTel firmware ready for download from Infinity support: ORA, P12, P13, P13+, P31, P32, P41

2021-09-18 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT6900, IT6910, IT9200, IT9300, L5002, L5002P, L5006, L5006C, L5006S, L5007

2021-09-13 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT6110, IT6110B, IT6120, IT6130, IT6131, IT6310, IT6331, IT6350

2021-09-11 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT5620, IT5621, IT5622, IT5625, IT5626, IT5630, IT5631

2021-09-08 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT5615, IT5615B, IT6516, IT5617, IT5618, IT5618N

2021-09-04 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT5603, IT5605N, IT5606, IT5606B, IT5608, IT5608B, IT5611, IT5613

2021-08-31 Support area with flash files updated

Tecno firmware ready for download from Infinity support: WX3, WX3LITE, WX3P, WX4Pro, WX4ProS, Y2

2021-08-29 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT5620, IT5620N,IT5312, IT5320B, IT5330, IT5360, IT5600

2021-08-26 Infinity Chinese Miracle-2 CM2MT2 v2.28 - MT6877, MT6893, Repair Security and more [Firmware v0150]

As ordinary, unique functions and methods released

Core
Changed: Protocol updated for Raphael / Legacy platforms
NewSOC: MT6877 supported - any security state - SLA, DAA, Plain
NewSOC: MT6893 supported - any security state - SLA, DAA, Plain
Changed: FireFly / Infinity DA (Download Agents) updated
Changed: NVRAM manager has been rebuild from scratch
For now it covers all Old and Modern devices for Identify and Repair operations in FlashMode!

FireFly - Universal DA (Download Agent) that was created by Infinity Team to reach new service level and gives features

FireFly: NewSOC: MT6739
FireFly: NewSOC: MT6761
FireFly: NewSOC: MT6763
FireFly: New operations supported:
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup

Current list of supported SoC:
MT6739
MT6761
MT6763
MT6765
MT6768
MT6771

Supported operations:
Identify: Device Info ( Android ), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other mode are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup

Flasher
Changed: UltraFlash engine updated and also any limitations has been removed
Changed: Flash engine updated

Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: MT6877 support
Changed: MT6893 support
Changed: Fake "Samsung" devices processing fixed

Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
Changed: "Identify" operation now show more security info
Changed: "Identify" operation now show modem info/version
Changed: New NVRAM engine/tools
! Read device security now works with Legacy (Old/New) and Raphael (Old/New) lines
! Rebuild check/verify procedures for modern devices
! Repair Security now works in flash mode for Raphael line too ( support most UNSIGNED types - Generic, Huawei, Vivo, Nokia etc. )
! Repair security NOT work with vendor-signed devices ( you will get info about device not supported during operation )
! Signed/Generic mode detection improved
Changed: Restore Backup operation has been updated
Changed: NVRAM read and write operations has been updated

Memorytool
Changed: FireFly mode support updated

Other
Changed: Many different general changes and fixes applied
Feature: Feedback - BugReporting/DebugData collection module enabled. Feedback can be enabled/disabled during installation.
! Feedback feature made for fast, automatic reporting to team about new/unsupported devices in different operations without any additional need of actions from user side.
! That will allow bring server-side updates faster and make updates for new and unsupported phones, if need, every day!

Read more here

2021-08-21 Infinity Pinout database v2.02 released

Information about boot keys, pinouts, test-points, hardware updated
NOTE: pinout v2.02 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there and not deleted

2021-08-19 Support area with flash files updated

Tecno firmware ready for download from Infinity support: W1, W2, W3LTE, W4, W5, W5Lite, TR109V, WP2

2021-08-17 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT5090, IT5090B, IT5091, IT5092 IT5231, IT5231B, IT5250, IT5250B

2021-08-16 Support area with flash files updated

Tecno firmware ready for download from Infinity support: T485, T528, T529, T631, T632S, T661, T662, T901, T920D

2021-08-09 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT5030, IT5040, IT5040B, IT5070, IT5071, IT5080, IT5080B, IT5081

2021-07-31 Support area with flash files updated

Tecno firmware ready for download from Infinity support: T432, T453, T454, T466, T473, T474, T484

2021-07-24 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT5020, IT5021, IT5022, IT5025, IT5026

2021-07-23 Infinity YouTube channel update

Please visit updated Infinity YouTube Channel

2021-07-19 Infinity Chinese Miracle-2 CM2MT2 v2.27 - MT6853, MT6853, Samsung, FireFly and more [Firmware v0150]

As ordinary, unique functions and methods released

Core
Changed: Protocol updated ( Raphael )
NewSOC : MT6833 support activated ( any security state )
NewSOC : MT6853 support activated ( any security state )
Changed: MT68xx line support optimized ( FireFly:EMI, EMI Engine, UltraFlash )

Auth
AUTH: MT6833 with any security configuration supported standalone!
AUTH: MT6853 with any security configuration supported standalone!

Core: Protocol: FireFly updated
FireFly - Universal DownloadAgent that was created by Infinity Team to reach new service level and provide advanced features

New SoC activated:
MT6768
MT6771

Current Supported SoC:
MT6765 ( any security configuration )
MT6768 ( any security configuration )
MT6771 ( any security configuration )

Support operations:
Identify: Device Info (Android), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other modes are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
! Read, Write (Binary, Sparse, Signed, Unsigned), Make FileSystems, Wipe, extra features
! Unlike MTK mode FireFly IS NOT rely on DA/Device security policy so there is no limits for different operations (No any Write / Erase issues)
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData

Changed : BootLoader unlock : ability to re-lock bootloader - software will ask if device already unlocked for re-lock it back

Flasher
Changed: UltraFlash engine updated
Changed: Samsung flashing support activated ( MTK models , only CM2 firmware! )
Changed: MT68xx line specific changes

Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: SAMSUNG devices line support activated!
! Allow read COMPLETE, SAFE, USABLE firmware. No any security damage, no any additional reflashing after required
Changed: MT68xx line specific changes
Changed: Android 9-10-11 DevInfo optimized
Changed: Firmware naming optimized
Changed: Vendor Specific : OPPO devices support optimized for read firmware
Changed: Vendor Specific : VIVO devices support optimized for read firmware

Service
Changed: "SmartReset" updated
Changed: "SmartReset" now activated for LEGACY line devices
! Device range : From MT6572 and up to 6737
! Tested SoC/Devices : MT6572, MT6592, MT6595, MT6735, MT6737, MT6752, MT6753, MT8127, MT8172, MT6580
! Tested Android version : 4.4, 5.x, 6.x, 7.x, 8.x, 9.x, 10.x
! Info : Due to wide range of LEGACY devices some of them may work not correct so, please, leave us reports about issues!
Changed: Identify operation now read more device info ( Android 10/11 )

MemoryTool
Changed: Init GPT updated ( Normal / Resize mode )
Changed: Extra operations updated
Changed: Operations in FireFly mode updated

Other
Changed: Many different internal changes and fixes applied

Read more here

2021-07-17 Support area with flash files updated

Tecno firmware ready for download from Infinity support: T372, T384, T401, T402, T409, T432

2021-07-16 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT2310, IT2320, IT2320B. IT2570, IT2590, IT4510, IT5010

2021-07-16 Infinity DongleManager v1.86 released

- Report & Fix procedure improved
- Report & Fix suggested according to Smart-Card state

2021-07-11 Infinity Chinese Miracle-2 CM2MT2 v2.26 - New Core, BootLoader Unlock and more [Firmware v0150]

As ordinary, unique functions and methods released

Core
Changed: Protocol updated (Raphael / Legacy)
Changed: MT6785 support fixed
Changed: MT6885 support fixed

Core: Protocol: FireFly activated
FireFly - Universal DownloadAgent that was created by Infinity Team to reach new service level and provide advanced features

Current Supported SoC (initial release):
MT6765

Support operations:
Identify: Device Info (Android), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other modes are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
! Read, Write (Binary, Sparse, Signed, Unsigned), Make FileSystems, Wipe, extra features
! Unlike MTK mode FireFly IS NOT rely on DA/Device security policy so there is no limits for different operations (No any Write / Erase issues)
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
! Bootloader unlock also allow unlock Brand-Specific cases (Xiaomi supported at the moment)

Changed : UniversalBoot : BootHelper
! Software always try to init BootRom mode if it's required for selected target
! Software allow force BootRom mode for generic models (plain one) if it's required
! In current release 4 different ways activated which cover most of cases but may not work with some cases, more to come

Flasher
Changed: UltraFlash engine updated

Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: Huawei line changes and fixes

Service
Changed: HWReport improved
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
! Vendor-specific mode improved for Samsung devices (A4x and others)
! Device brands supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung
Changed: Identify operation now save preloader backup
Changed: Identify opertaion now show OTP info for Alcatel-like and similar devices
NewFeature : BootLoader Unlock Activated ( No data Loss )
Changed: Full MemoryInfo (include CSD, WP status, EOL info etc.) now shown in FireFly mode by default

Memorytool
Changed: Preloader Init has been rebuild - Raphael, Legacy, FireFly
Changed: Automatic selection rules updated
Changed: Extra operations updated
Changed: FileSystem build revised
Changed: FireFly as core protocol supported in MemoryTool

Other
Changed: Many different general changes and fixes applied
Changed: Protocol/SoC Generation switch can be done over "Platform" in System Menu
! According to Platform/Protocol selection some features may enabled or disabled - make right Platform selection before operation!

Read more here

2021-07-10 Support area with flash files updated

Tecno firmware ready for download from Infinity support: T301, T311S, T349, T349D, T350, T351

2021-07-09 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT2182, IT2190, IT2190S, IT2191, IT2191B, IT2192, IT2192T

2021-07-03 Support area with flash files updated

Tecno firmware ready for download from Infinity support: SA1, SA1S-Pro, SA3, SA6, SC7S, T101, T201, T203S

2021-07-01 Infinity DongleManager v1.83 released

- Important internal changes
- Report & Fix option released
- GUI changes

2021-06-27 Infinity Chinese Miracle-2 CM2SP2 SPD-UniSoc v2.13 - Boot RSA Auth activated [Firmware v0150]

As ordinary, unique functions and methods released

Core
Changed: FlashCore protocol updated
Changed: Automatic detection and use loaders with PMTInfo
Changed: FlashLoader authentification [RSA and AES] activated ( brand-specific )
- Allow service over FlashMode models, which require remote authentification
- Supproted Brand lines: Itel - all RSA-auth enabled models
- Supported default prod auth - Generic models, RSA and AES
- After sucessfull auth you have full access to any service operations - flash read, write, frp, repair
- Feature require Internet access and valid IOS username and password
- Feature is free and unlimited for all currently supported models

Flasher
Changed: Protocol updated

Firmware reader
Changed: New range of generic and brand-specific models support for safe and complete Firmware Read
Changed: NAND support revised

Model DB
Changed: Moto G20 (XT-2821-X line) included in list (support under test)

Other
Changed: Some changes and fixes

Read more here

2021-06-25 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT2172, IT2173, IT2173B, IT2180, IT2180B

2021-06-23 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X658B, X659, X659B, X660, X660B, X660C, X680, X680B, X680C, X680D, X680E, X680F

2021-06-21 Support area with flash files updated

Tecno firmware ready for download from Infinity support: RA6, RA6S, RA7, RB6S, RB7S, RB8S, RC6, S6, S6S

2021-06-20 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT2163, IT2163D, IT2163R, IT2170, IT2171, IT2171B, IT2171S

2021-06-17 Infinity Chinese Miracle-2 CM2MT2 v2.25 - MT68xx line, new models and features [Firmware v0150]

As ordinary, unique functions and methods released

Core
Changed: Protocol updated (Raphael/Legacy)
NewSoC : MT6873 support activated
NewSoC : MT6885 support activated (under test)
Changed: BootHelper : core updated
Changed: FireFly : EMI updated
Changed: MT817x line support improved
Changed: Boot : HWinfo parsing improved

Changed : UniversalBoot : EMI Engine
! Selection rules updated
! By default during Flashing used FW as source
! EMI collecting speed optimized, now more faster on auth-enabled devices
! BootHelper <> FireFly interaction optimized

NewSoC : MT6873 supported features
! Standalone SLA : supported
! FireFly : EMI : supported
! META operations : supported
! Firmware Read : supported
! Firmware Write : supported
! Reset Settings : supported
! Reset FRP : supported
! Misc Operations : supported

Flasher
Changed: UltraFlash engine updated
! Tuned up for multi-failed regions ( like Huawei )
Changed: Default FlashSettings updated

Firmware Reader
Changed: Huawei support activated!
! Allow read CORRECT firmware but not a useless/harmful dump etc.
! Sparsing for Huawei-specific partitions activated - extremely reduce FW size
Changed: New types supported
Changed: Internal Database updated
Changed: Activated sparsing (reduce firmware size and increase flashing speed) for:
! - F2FS
! - HuaweiFS
Changed: MT6873 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Changed: MT6885 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one

Service
Changed: META protocol updated
! Support MT68xx line
! Legacy bugfixes
Changed: HWReport improved (MT68xx line support)
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
! Vendor-specific mode activated for SAMSUNG phones
! Device brands, supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung

Other
Changed: Many different general changes and fixes applied

Read more here

2021-06-16 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X658B, X659, X659B, X660, X660B, X660C, X680, X680B, X680C, X680D, X680E, X680F

2021-06-15 Support area with flash files updated

Tecno firmware ready for download from Infinity support: N2, N5S, P701, P702AS, P703, P904, PP7E, PP7E-Pro, R6S

2021-06-14 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT2132, IT2150, IT2160, IT2160S, IT2161, IT2161R, IT2162

2021-06-12 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X653, X653C, X655, X655C, X655D, X655F, X656, X657, X657B, X657C

2021-06-07 Infinity Chinese Miracle-2 CM2SP2 SPD-UniSoc v2.12 - New repair level activated [Firmware v0149]

As ordinary, unique functions and methods released

Core
Changed: FlashCore protocol updated (R25)
Changed: New DL-core support (v10 at Infinity notation)
NewSOC: SC9820e [RS/0S] with NAND supported
Changed: Diag protocol updated

Flasher
Changed: Protocol updated
Changed: FlashCore rebuild
- Reworked FlashErase
- Reworked support of fully erased or semi-damaged modern devices Android 8/9/10/11 (SC9820e, SC7731e, SC9832e, SC9863, SC9850), it is possible to repair these devices from any state (in case of working HW)
- Reworked NVRecovery procedure
- Android version change ( Downgrade/Upgrade ) now work more correct

Firmware reader
Changed: Android 10 specific changes
Changed: KaiOs specific changes
Changed: Initial Android 11 support
Changed: UltraRead protocol updated
Changed: Fixed "Encryption Unsucessfull" errors on some devices after flash

SPUnlock
Changed: Android 11 SPunlock and Repair confirmed and working
Changed: UniSoc Tiger T310 initial SPUnlock/Repair support
Changed: Changed unlock procedure for some devices
Changed: Allow check status/continue unlock on zero balance
Almost all existing on market devices for SP-Unlock and Repair are supported, Android 10 / 11 "security" as well

Model DB
Changed: New generic loaders included for 9820E with NAND

Other
Changed: Many other different changes and fixes

Read more here

2021-06-05 Support area with flash files updated

Tecno firmware ready for download from Infinity support: LB8, LC6, LC6a, LC7, LC7S, LC8, LD7, LD7j

2021-06-04 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT2090, IT2100, IT2100S, IT2110, IT2120, IT2123, IT2123V, IT2130B

2021-06-03 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X627, X627V, X627W, X650, X650B, X650C, X650D, X652, X652A, X652B, X652C

2021-06-02 Online model selector updated

Please TRY and give your advice

2021-06-02 Support area with flash files updated

Tecno firmware ready for download from Infinity support: L9, L9+, LA6, LA7, LA7-Pro, LB6, LB7, LB8, LB8a

2021-06-01 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X623, X624, X624B, X625B, X625C, X625D, X626, X626B

2021-05-29 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT1516+, IT1520, IT1556, IT1556+, IT1655, IT1702, IT1703, IT2050V

2021-05-25 Infinity Chinese Miracle-2 CM2MT2 v2.24 - UniversalBoot and other features [Firmware v0148]

As ordinary, unique functions and methods released

Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: BootHelper updated
Changed: MT8172/MT8173 support improved
Changed: MT6580/MT6752 support improved
Changed: MT6735/MT6737/MT6753 support improved

NewFeature UniversalBoot: EMI Engine
! Allow boot device without need of preloader or whatever else, all settings got from device
! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported
! Some device may NOT work : Fully ERASED or RE-MARKED CID
! Feature ovveride default EMIDB , from Firmware and BootHelper
! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default )

NewFeature UniversalBoot: AutoDA select
! At wrong base DA selection software will automatically change DA base for connected device
! Feature will select most correct, well tested and usable DA for target
! Must be installed complete bootPackage ( before v2.21 ) for correct work!

!With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered )
!No other optional steps required

Flasher
Changed: UltraFlash engine updated
Changed: Legacy FlashCore rebuild
! Optimized for modern/old DA versions and different targets on OLD CHIPs
! Use of latest version for service LEGACY lines is strongly recommended
Changed: Default FlashSettings updated

MemoryTool
Changed: "Init GPT/PMT with resize" feature improved

Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated

Firmware Reader
Changed: New types supported
Changed: Internal Database updated

Other
Changed: Some general changes and fixes

Read more here

2021-05-24 Support area with flash files updated

Tecno firmware ready for download from Infinity support: KF6, KF6h, KF6i, KF6j, KF6k, KF8, L8, L8-Lite

2021-05-19 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X606, X606B, X606C, X606D, X610B, X612B, X620, X620B, X622

Read more here

2021-05-17 Support area with flash files updated

iTel firmware ready for download from Infinity support: IT1408, IT1409, IT1452, IT1503, IT1508, IT1513

Read more here

2021-05-14 Support area with flash files updated

Tecno firmware ready for download from Infinity support: KE5, KE5j, KE5k, KE6, KE6j, KE7

Read more here

2021-05-13 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X600, X601, X602, X603, X604, X605

Read more here

2021-05-11 Support area with flash files updated

iTel firmware ready for download from Infinity support: A51, A52, A52B, A571L, A571LL, A571W, IT1406, IT1407

Read more here

2021-05-10 Support area with flash files updated

Tecno firmware ready for download from Infinity support: KC8, KC8S, KD6a, KD6, KD7, KD7S

Read more here

2021-05-09 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X571, X572, X573

Read more here

2021-05-08 Support area with flash files updated

iTel firmware ready for download from Infinity support: A31, A31+, A32F, A42+, A43, A44, A44Power, A44Pro, A45

Read more here

2021-05-07 Support area with flash files updated

Tecno firmware ready for download from Infinity support: IN5, KC1j, KC2, KC2j, KC3, KC6

Read more here

2021-05-05 Infinity Chinese Miracle-2 CM2MT2 v2.23 - New models and features [Firmware v0148]

As ordinary, unique functions and methods released

Core
Changed: Protocol updated ( Raphael/Legacy )
NewSOC: ChipConfig for MT6833 activated ( under test )
Changed: BootHelper updated
Changed: Fixed SW reaction to conenction/power issues ( lags/stuck removed )
Changed: META core updated
! Allow connect from now to device, which already in META mode
! Identify by default not reboot device, other operations - reboot
Changed: Fixed Preloader mode handling on some driver versions
Changed: Fixed META init on some devices
Changed: SLA: Development feature to generate and send error reports automatically for unsupported devices
! No any data will be sent without user request

Flasher
Changed: UltraFlash engine updated

MemoryTool
Feature: Activated "Init GPT/PMT with resize" option
! Allow in some cases fix: Stuck/freeze/Rebooting issues on cheap encryption-enabled devices with cheap memory installed
! Issue found on MiPlay, some Infinix and other devices ( should work on more models range )
! Feature work by decrease UserData space size to avoid "bad blocks"

Service
Changed: SmartReset updated
Changed: SmartReset Extra mode updated
! SmartReset Extra acts like ordinary ones, but make additional, brand-required operations :
- Reset MiAcc for XIAOMI ( non-permanent )
- Reset FlyMe acc for MEIZU
- Reset DEMO mode on VIVO devices ( under test )
! Other, vendor-specific scripts can be included by users requests
Changed: "Restore Backup" option updated
! Clean and prepare files for correct restore in secure devices revised

Firmware Reader
Changed: New types supported
Changed: Internal Database updated

Other
Changed: Some general changes and fixes
Changed: Connection mode fixes

Read more here

2021-05-04 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X555, X556, X557, X559

Read more here

2021-05-03 Support area with flash files updated

iTel firmware ready for download from Infinity support: A20, A22, A23, A23A, A23F, A23S

Read more here

2021-05-02 Support area with flash files updated

Tecno firmware ready for download from Infinity support: ID5a, ID5b, IN1, IN1-Pro, IN2, IN3

Read more here

2021-05-01 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X5516C, X5516, X551, X553, X554, X555

Read more here

2021-04-30 Support area with flash files updated

iTel firmware ready for download from Infinity support: A15R, A15, A16+, A16, A16S

Read more here

2021-04-28 Infinity Chinese Miracle-2 CM2MT2 v2.22 - New models and features [Firmware v0148]

As ordinary, unique functions and methods released

Core
Changed: Protocol updated (for Raphael/Legacy SoC)
Changed: Loader v2112 supported and tested
Changed: MediaTek MT6757 support revised
Changed: StandAlone SLA now activated in automatic mode for phones that need it
Changed: Driver dependency is not important any more, it gives more flexibility and more stable operations
Changed: EMI DB updated, BootHelper updated
NewChip:: MT3561/MT3561S supported (CardHeadUnit)

Flasher
Changed: Core updated for RAPHAEL SoC line
Changed: UltraFlash engine updated

MemoryTool
Changed: Long-range reading (over 32+ GB) optimized ( in most cases for Forensic cases )
Changed: LEGACY support revised

Service
Changed: SmartReset function process updated
Changed: New SmartReset mode activated - SmartReset Extra
! SmartReset Extra acts like ordinary ones but makes additional operations for specific brands:
- Reset MiAcc for Xiaomi ( non-permanent )
- Reset FlyMe acc for Meizu
! Other vendor-specific scripts can be included by users requests
Feature: "Restore Backup" option activated ( see Security tab )
! Automatic restore backup for connected device if this backup was already created earlier by Identify, Settings -> Autobackup option

Firmware Reader
Changed: Android 11 specific changes
Changed: Brand-specific changes and fixes
Changed: Better sparse handling
Changed: New types supported
Changed: Internal Database updated

Model DB
Changed: Changed acting model to semi-auto
! In most cases it is enough just to select required operation and connect devices ( BROM mode preferable )
! In some situations it may need to select older BASE DA for older SoCs ( LEGACY ones, since they are outdated )
Changed: New DA base v2112 included

Other
Changed: Number of small changes and fixes
Changed: Some unused options and checkboxes has been removed as deprecated, UI become easier


Here is virustotal report for people who care about safety. Be sure you do not use low quality antivirus tools - first 6 lines in given list gives false alert!

Read more here

2021-04-28 Support area with flash files updated

Tecno firmware ready for download from Infinity support: F3Pro, F4, F4Pro, i3, i3Pro, i5Pro, i7, IA5

Read more here

2021-04-27 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X522, X5511, X5514, X5515, X5515F, X5515I, X5516B

Read more here

2021-04-26 Support area with flash files updated

iTel firmware ready for download from Infinity support: A11, A12, A14, A14S

Read more here

2021-04-25 Support area with flash files updated

Tecno firmware ready for download from Infinity support: A675, A6, DP8D, F2LTE

Read more here

2021-04-24 Support area with flash files updated

Infinix firmware ready for download from Infinity support: X5010, X507, X509, X510, X521, X522

Read more here

2021-04-20 Infinity Dongle [Smart-Card] upgrade server got new features

- Advanced error check and recovery methods implemented
- Automatic Smart-Card recovery after lost Internet connection
- New Smart-Card types are supported
- Infinity DongleManager v1.81 (or higher) is required
- Updated Smart-Card firmware for renewed dongles released

Read more here

2021-04-06 Sony direct unlock/counter 0 reset comes back

Sony direct unlock/counter 0 reset (any model) qUnlockTool is back

2021-03-17 SL3 service comes back

SL3 service comes back with new price, check price before make an order

2021-03-01 Infinity Pinout database v2.01 released

Information about boot keys, pinouts, test-points, hardware updated

NOTE: pinout v2.01 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there and not deleted

Read more here

2021-02-18 SL3 servcie delay

There is a some kind of unpredictable delay with SL3 service.
We are trying to solve it with all our efforts.
If your SL3 orders become delayed and you can not wait any more please contact to support for refund.
Default quoted time for new orders is 7 (seven) days !

Thank you for your kind understanding !

Read more here

2021-02-15 Smart-Card managemen engine become revised

Smart-Card management engine has been adjusted, OS firmware code optimization was finished and finally whole system become ready for new features.
To improve whole system stability and to free Smart-Card memory for new features some kind of legacy code will be removed from Smart-Card OS and previously released free test versions (several year old) will be removed step-by-step.

For end users it will be no any visible changes, the only exceptions are:
- Smart-Card update process will be little bit faster due to firmware code optimization
- Legacy free test software versions will be unavailable. As a replacement for legacy free test versions you can consider to order paid one anytime

Currently NO ACTION by users are required !
New features will be applied automatically as a part of regular Smart-Card update
Please DO NOT update Smart-Card until you will see explicit message that firmware should be updated

2021-02-10 Infinity Chinese Miracle-2 CM2SP2 SPD-UniSoc v2.11 - Unlock, Repair, New CPU [Firmware v0147]

As ordinary, unique functions and methods released

Core
Changed: FlashCore protocol updated
NewSOC: UMS9117 support ( service mode )

Flasher
Changed: Protocol updated
Changed: NVM manager updated

Firmware reader
Changed: Android 10 specific changes
Changed: UltraRead protocol updated
Changed: New types supported

Service
Changed: Repair : Security Repair allow now repair signed devices
- Permanent lock and other issues can be also fixed with that feature
- Repair can be done in Flash and Diag mode
- Repair support new security devices as well ( Android 10 + )
Changed: Repair : UMS9117 repair security support activated ( Nokia line supported included )
Changed: Identify : Enabled Read All Info by default under FlashMode
Changed: FormatFS : UMS9117 Reset/Format FS support activated

SPUnlock
Changed: UMS9117 support activated ( Nokia line supported included )
Changed: SC9863, SC9832 support improved

Other
Changed: Many internal changes and fixes
Drivers: UMS9117 drivers are at support area

Read more here

2021-02-02 Infinity Chinese Miracle-2 CM2MT2 v2.21 - MT67xx and MT81xx ON ! [Firmware v0147]

As ordinary, unique functions and methods released

With this update we finishing following achievements:
Complete MT67xx line support !
Complete MT81xx line support !

Core:
Changed: Protocol updated ( Raphael/Legacy )

AUTH: MT6779 with any security configuration supported standalone !
AUTH: MT6799 with any security configuration supported standalone !
AUTH: MT8127 with any security configuration supported standalone !
AUTH: MT8167 with any security configuration supported standalone !
AUTH: MT8172 with any security configuration supported standalone !
AUTH: MT8173 with any security configuration supported standalone !

Changed: BootHelper updated
- Automatic Self-Learning function improved
Changed: EMI manager updated, most modern devices support has been included

Flasher:
Changed: Core updated for RAPHAEL line

Firmware Reader:
Changed: New types supported
Changed: Internal Database updated

ModelDB:
Changed: Some specific and brand list update

Other:
Changed: Different changes and fixes

Installer:
[*] Installer become more compact and now contain two parts: required and optional
[*] Optional Installer CM2MT2-boot-pack contain optional (legacy) boot files

Read more here

2021-01-29 Infinity Chinese Miracle-2 CM2MT2 v2.20 - Standalone MTK auth ON - NEW CPU [Firmware v0147]

As ordinary, unique functions and methods released

Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6752 with any security configuration supported standalone !
AUTH: MT6753 with any security configuration supported standalone !
AUTH: MT6768 with any security configuration supported standalone !
AUTH: MT6757 support improved/fixed

Service:
Changed: Identify procedure revised
- Support modern Android 10 devices
- Support for Android 11 devices activated
Changed: SmartReset procedure
- Support modern Android 10 devices
- Support for Android 11 devices activated

Firmware Reader:
Changed: Android 10 specific changes for modern devices
Changed: Android 11 initial support
Changed: New types supported
Changed: Internal Database updated

ModelDB:
Changed: Some specific and brand list update

Other:
Changed: Many different changes and fixes

Read more here

2021-01-28 Infinity Chinese Miracle-2 CM2MT2 v2.19 - Standalone MTK auth ON - NEW CPU [Firmware v0147]

As ordinary, unique functions and methods released

Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6580 with any security configuration supported standalone !
AUTH: MT6735 with any security configuration supported standalone !
AUTH: MT6737 with any security configuration supported standalone !
AUTH: MT6731 with any security configuration supported standalone !
AUTH: MT6739 with any security configuration supported standalone !
AUTH: MT6750 with any security configuration supported standalone !
AUTH: MT6755 with any security configuration supported standalone !
AUTH: MT6757 with any security configuration supported standalone !
AUTH: MT6761 with any security configuration supported standalone !
AUTH: MT6762 with any security configuration supported standalone !
AUTH: MT6763 with any security configuration supported standalone !
AUTH: MT6765 with any security configuration supported standalone !
AUTH: MT6771 with any security configuration supported standalone !
AUTH: MT6785 with any security configuration supported standalone !
AUTH: MT6795 with any security configuration supported standalone !
AUTH: MT6797 with any security configuration supported standalone !
AUTH: MT8163 with any security configuration supported standalone !
Changed: BootHelper package updated
- Automatic Self-Learning function activated
- Do not need to make HWreport anymore before other operations in most cases !

Service:
Changed: META core updated
Changed: Security repair features rebuild. Bugfixes.

Firmware Reader:
Changed: Some modern brand-specific changes (Vivo, Meizu)
Changed: New types supported
Changed: Internal Database updated

Other:
Changed: Many different changes and fixes

Info:
Alternative MTK drivers package uploaded to support are, intstall it if you have any kind of connectivity issues

Read more here

2021-01-27 MTK drivers package v2.0.1.1

New MTK drivers package Drivers_MTK_v2.0.1.1.7z uploaded to support area.
Download from support area /software/drivers/ folder

2021-01-26 Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features [Firmware v0147]

As ordinary, unique functions and methods released

Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: Loader v2044 supported and tested ( v2028 was unstable with MT6765 )
NewChip: MediaTek AC8227 (Car HeadUnits SoC) supported
NewChip: MediaTek AC8257 (Car HeadUnits SoC) supported

Flasher
Changed: Core updated for RAPHAEL line

Service
Changed: META core updated

Changed: HW Report ( RAPHAEL - only )
- LifeStatus identify revised, in some cases it may shown wrong info. Strongly recommend use latest version for HWcheck !
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices (DRAM init)
!* HWreport not require complete boot in case of semi-dead devices, it is useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !

Firmware Reader
Changed: Some modern brand-specific changes (Oppo, Realme)
Changed: New types supported
Changed: Internal Database updated

Model DB
Changed: New agents included for Tecno, Infinix ( with different SoC lines )
Changed: New DA base v2044 included

Other
Changed: GUI settings now stored and load select style, settings and other at next run
Changed: Environment compatibility issue with 32 bit OS has been fixed
Changed: Many different changes and fixes

Read more here

2021-01-23 Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone MT67xx auth ON [Firmware v0147]

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
NewFeature: Standalone SLA/Auth [Raphael] **
Changed : Internal EMI engine updated : RAPAHEL : UFS support rebuild

Flasher
Changed: Core updated for RAPHAEL line
Changed: UltraFlash feature updated, new security workarounds supported

Service
Changed: Identify
!* Read new Android 10 specific fields, vendor-specific fields
Changed: Smart Reset
!* Optimized support for different customized and generic cases

Changed: HW Report ( RAPHAEL - only )
!* UFS line devices now supported with following features:
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
- Partitioning details and other
- HWreport log saving enabled ( for further analyze )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !

Firmware Reader
Changed : Some modern brand-specific changes ( Xiaomi, Oppo, Vivo, Realme )
Changed : New types supported

Other
BugFix : Many different minor changes and fixes
Changed : Generic protocol rebuild

Info
!**
- Standalone SLA/Auth allow you ignore device security setting and allow boot it without having any DA/Auth/Remote auth support
- You can boot ( with supported SoC ) device with any generic da and perform any need operations
- Support MT6765 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing
- Support MT6785 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing

NOTE 1: special boot-helper tool should be installed - included in CM2MT2 package
NOTE 2: x64 OS should be used

Read more here

2021-01-19 Infinity Data Explorer v1.11 - MTK, SPD updated and more improvements [Firmware v0100]

Data extraction based on full reconstruction of file system

- MTK module updated - added Call List extraction for some models
- SPD firmware structure detection improved, important algos and methods updated
- Minor bugs fixed

Read more here

2021-01-19 AMT-Dongle Team notification - software activation price changes

AMT-Dongle special offer (discount price) for software activations is closed, price is back to initial value

Read more here

2021-01-17 Server side improvements

CM2SP2 server [SPD] procedures will be under improvements in nearest days.
If you will see something new in software functionality please read software messages carefully and report any found issues.

2021-01-02 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features !

As ordinary, unique functions and methods released

Core
Changed : FlashCore protocol updated
NewSOC: UniSOC Tiger T61x series support
NewSOC: UniSOC UIS7862 (Car HeadUnits SoC) series support
NewSOC: SC7731E Android 10 / FastProto supported
NewSOC: SC9832E Android 10 / FastProto supported

Flasher
Changed : Protocol updated
Changed : NVM manager updated
Changed : FastFlash protocol updated ( SC7731E, SC9832E supported )

Firmware reader
Changed : Android 10 specific changes
Changed : Initial Tiger and NaT devices support
Changed : UltraRead protocol updated ( SC7731E, SC9832E supported under 0S loaders now )

Service
NewFeature: Security Repair allow change PSN1/PSN2
- In newer devices PSN1/2 damage may lead to bootlop, ota and other issues
- In newer devices PSN1/2 used as bootloader token
Changed : Identify : Correct MEMORY and RAM size reading for Android 10 devices
Changed : Identify : Read PSN1 and PSN1
Changed : Identify : SC9832E and SC7731E can be used to verify eMMC ReadOnly state (0S loader mode)
Changed : Repair : Identify signed devices during repair
Changed : NVM : Read and Write operations revised

UserData
Changed : UserData dump feature updated ( Legacy line fixes )

SPUnlock
Changed : SC9863 support updated
Changed : SC9832 support updated
Changed : PermLock fix ( processed in automatic mode, fix issue with possible PermLock after first unlock try )
NewFeature: Error codes explanation and hints
NewFeature: Damaged devices ( security destroyed ) detection
NewFeature: Damaged devices ( permLock ) detection

Model DB
Changed : New generic loaders included for SC7731E with Android 10 ( 0S type )
Changed : New generic loaders included for SC7792E with Android 10 ( 0S type )
Changed : New generic loaders included for Tiger T61x
Changed : New generic loaders included for UIS7862
Changed : ZTE, Itel and others line loaders updated to support faster operatons amd more HW variants

Other
Changed : GUI settings now stored and load select style, settings and other at next run
Changed : Lot of different changes and fixes

Read more here

2020-12-31 Server algorithms for SPD unlock updated

Server algorithms for SPD unlock updated with important improvements.
No need to update CM2SPD software at the moment, CM2SP2 v2.09 can handle process well.

2020-12-15 Infinity Chinese Miracle II SCR/SPD-RDA v1.07 - RDA8955x CPU line supported

As ordinary, unique functions and methods released

RDA8955x is an extra cheap SoC with 2G/GPS support.
It is used in cheap wearable, IoT and feature phones.

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
SpreadTrum: SC68xx ( with external PAC )
SpreadTrum: SC770x ( with external PAC )
UniSoc: SC6531E, SC6533, SC6533G, SC770x
RDA Mirco: RDA8955G, RDA8955GE, RDA8955L
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

Core
NewChip: Support RDA 8955 Line (8955G, 8955GE, 8955L)
BugFix: Support for some SC6533 revisions fixed ( Wrong PMT issue )

Support RDA 8955 Line (8955G, 8955GE, 8955L)
- Identify ( Security info, compilation info, Hwinfo )
- Format FS / Reset Settings
- Read UserCode / PrivacyCode
- Repair Security
- Read Flash / FW
- Write Flash / FW / LOD

Service
Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc )
Changed: BOOTROM support improved ( RDA )
Changed: SVC ( Diag ) mode support optimized for modern UniSoc 89xx platforms

UserData
Changed: Security code read in FlashMode revised ( RDA )

Other
BugFix: Lot of small different changes and fixes
Option: GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases

Read more here

2020-12-12 Infinity Facebook group

Read more here

2020-12-03 Servers are back to work

Servers are back to work.
We hope everything is well but anyway please let us know if you will see any kind of issues.
Thank you once again for your patience !

2020-12-02 Servers maintenance 03-Dec-2020 11:00 - 13:00 GMT

Sheduled servers maintenance 03-Dec-2020 11:00 - 13:00 GMT
Some services/sites may be temporary unavailable at that time.

Thank you for your kind understanding !

2020-11-24 iosFileUploader v1.10 released

- check uploaded file firmware version by server database
- minor bugs fixed

Read more here

2020-11-17 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.09 - SPUnlock for most SPD/UniSoc

As ordinary, unique functions and methods released

Core
Changed : FlashCore protocol updated

Flasher
Changed : NVM manager updated. Recovery mode rebuild

Firmware reader
Changed : SPRD Android 4.x line minor changes
Changed : Improved structure identification
Changed : New types supported (Android 9/10)

Service
New Feature: SP (Network) Unlock activated !
- Support Legacy SPRD phones on SC7715/SC7731/SC9820/SC9832/SC9850
- Support modern UniSoc phones on SC9820e/SC7731e/SC9832e/SC9850/SC9853i/SC9863
- Support unlock in FlashMode ( ! recommended way, permanent )
- Support unlock in DiagMode ( ! may relock in some certain cases )
- Support unlock for signed and unsigned devices
-- Unsigned/Legacy devices supported standalone without server
-- Modern devices require server support
Test reports and free unlock for testers are HERE
Changed : NVM manager updated ( Read/Write process revised )

Other
- Setting tab activated
-- Allow setup user details to use remote/server functions
-- Allow select Firmware path
- Changed default paths for different operations
- Minor changes and fixes

Models tested standalone - free, no need server:
Blu C4
Bmobile AX1077+
Bmobile AX1078
Bold T5+
Bolt (Blu) T5 T0040TT sc9832e
Bolt (Blu) T5 T0050TT 2sim Tigo sc9832e
Bolt (Blu) T5+ T0060TT 2sim Tigo sc9832e
Bolt (Blu) T5+ T0070TT 1sim Tigo sc9832e
GoMobile 1452
Hisense U963
IMO Q2+
Itel A23s
Mobicel Pulse-1
Mobicel Rio SS
Mobicel Ruby
Mobicel Star
Movitel M8416
Safariom Neon Ray Pro
Tecno RB6S (SU335)
Tecno SA2S
Tigo T-Smart 4G sp9820e

Models tested via server:
Digicel DL3
Itel A14
Hisense U963 HLTE100E
Hisense U963 HLTE100E ANdroid 10 (change RS to SS in settings before process)
Hisense U40
Android 10
Itel A23R [Itel A23 Jio]
Mobicel Beam
Mobicel Glo
Mobicel Rio SS
N-C1 TA-1165
Safaricom Neon Ray
Tecno SC7S
Vodacom Kicka-4-VE
ZTE Blade L130
ZTE Blade A3 2019
ZTE Aspire A3 2019
ZTE Aspire A5
ZTE A3 2020 Claro

Read more here

2020-11-15 SPD sp-unlock/network lock test process started (FREE)

All users are welcome to test new software

Read more here

2020-11-03 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.08 - NAND, Forensic and more features !

As ordinary, unique functions and methods released

Core
Changed : FlashCore protocol updated
Changed : NAND support rebuild
Changed : X64 SS/RS loader line handling optimized
New SOC : SC9820E with NAND support
New SOC : SC7731E with NAND support

Flasher
Changed : NAND support rebuild
Changed : Big files handling optimized
Changed : NVM manager updated

Firmware reader
New Feature : UniSoc NAND SC9820E/SC7731E support activated !
- Allow backup FW from range of phones, based on SC9820E/SC7731E SoC with NAND flash memory
- Firmware is complete, not damage any security, ota or any other compatibility
Changed : Improved structure identification
Changed : Forced reading ( disable deep verify ) option enabled - Use WITH CAUTION!
Changed : Android 4.x / Mocor 5 specific changes
Changed : UBI defragmentation for NAND devices activated by default

Service
New Feature : Security Repair allow change BT/WiFi MAC
- Useful only in DiagMode for UniSoc(E-line), Flash/Diag for SPRD line
Changed : Security Repair options - Generate MAC's - double click at MAC field to generate and activated
Changed : Security Repair options - AutoIncremental set SEC2/SEC3 fields, when SEC1 set. Just double click in next field
Changed : Security Repair : NVM Manager updated according latest devices changes
Changed : Identify : Support identify for UniSoc NAND line
Changed : Identify : NAND identify speed increased

UserData
Changed : Privacy reading types increased to 4 ( +2 new types )
New Feature : UserData DeepVerify and DUMP activated!
- Available for users with active Infinity Data Explorer module!
- Ignore ALL sprd protocol limitations, which require MEMORY DESOLDER and EXTERNAL MEMORY PROGRAMMER using!
- Allow verify and dump COMPLETE USER image for wide range of types and filesystems
1. eMMC with EXT3/EXT4 filesystem. FDE check may differs from Identify!
2. eMMC with F2FS filesystem. FDE check may differs from Identify!
3. NAND with UBIFS. Result image defragmented and prepared for further forensic analyze
- Internal checks during dumping make differ, than Identify option, analysis. Even if Identify say FDE - device can be not encrypted.
- Ability to resume dumping in case of read fails, can be used much times, as need
- After dumping device must be flashed!
1. Get FW or make FW backup from WORKING/GOOD device with complete options if SW asks
2. Complete Flash device
or
2. If need revert device to initial state
2.1 : Select FW, uncheck all items ( Rmouse - > Uncheck all )
2.2 : Select UBOOT/SPL
2.3 : All other settings must be default, not touch anything
2.4 : Flash device

Model DB
Changed : New generic loaders included, changes some existing once for better compatibility
Changed : Generic SC9820E NAND loaders included
Changed : Generic SC7731E NAND loaders included

QIN QF9 ( QIN1 SC9820E ) - full support : Read/Write FW,Reset Settings,Security,Service
- Firmware can be found on support area
- Boot key : Call button
- Change Lang sequence : Ok, Left, down, ok, 15 times - down, ok, ok, select need language ( English )

Read more here

2020-10-29 Infinity Online Service (IOS) updated

New product available - Borneo Schematics Activation code (licence)

2020-10-25 Infinity Online Model (CPU) selector released

Infinity Online Model (CPU) selector released, it helps to find application for selected model

2020-10-22 Infinity Online Service (IOS) updated

- New product available - TFM-Tool software license
- AMT Dongle Special Offer (discount price) extended up to 19 Nov 2020

2020-10-19 Infinity Data Explorer v1.10 - MTK, SPD algorithms updated and more improvements

Data extraction based on full reconstruction of file system

- MTK module updated (Added all files extraction)
- SPD module improved and updated
- FileSystem library updated (Full support all FAT versions)
- Added Function - Save FileSystem (as per users request)
- v1.08/v1.09 SPD detection failure bug fixed
- Minor bugs fixed

Read more here

2020-10-13 Infinity Chinese Miracle-2 MTK/MediaTek v2.16 - Another step forward

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
BugFix : MT6737M/MT6580
Changed : Internal EMI engine rebuild
!* LEGACY line : DB rebuild and updated, changed and optimized selection features
!* RAPAHEL line : DB rebuild from scratch. Selection feature rebuild. Manual mode removed and changed to automatic.
Summary :
!* Supported almost all existing memory/dram combinations up to current date for LEGACY lines
!* Supported almost all existing memory/dram combinations up to current date for RAPHAEL lines ( up to DIMENSITY line )
!* REMOVED manual EMI selection by bruteforce. NOT NEED ANYMORE set one-by-one internal EMI db counter and boot device every time. All auto.
!* In rare case of discrette DRAM may require change EMI once for some specific devices
!* After device learning ( via HW report feature ) it will be stored in SW Database and used automatic at every service/flash/repair operation
!* Overall : Not need seek compatible preloader files for new/not existing FW's devices, spend time to bruteforce and etc. Just connect and work!

Flasher
Changed : Core updated for LEGACY line
BugFix : MT6737 with Android 10 flashing revised
BugFix : Checksum verify rebuild
BugFix : Changed memory repartition model for modern scatter formats ( used in Android 10 FWs )
BugFix : Different scatter-version dependencies handled now correct
Changed : Core updated for RAPHAEL line
Changed : UltraFlash feature updated, new security workarounds supported

Service
Changed : Identify
!* Legacy platform changes, mostly for Android 10 devices
Changed : Smart Reset
!* Optimized support for different customized and generic cases

NewFeature : HW Report ( RAPHAEL - only )
!* Allow read extended info from device about its HW
- EXTCSD info ( complete, include eMMC version, all flags etc. ) - used in case of identification for HWrepair purposes
- CSD info ( complete, TEMP/PERM write protection status ) - used in case of identification ReadOnly state in some cases
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents, even on same SoC!

Firmware Reader
Changed : LEGACY line support updated ( Android 10 line )
Changed : Support more different types
Changed : FileSystem tools updated. Issues with reading on some systems should be fixed.
Changed : More wide range of scatter versions creation according device specific data

Other
BugFix : Lot of minor changes and fixes
Option : GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases

Info
!* Strongly recommend to use ONLY Infinity or Factory firmwares for modern Android 9/10 device to avoid lot of issues
- FOTA issues
- Attestation Key Issues
- Tee Key issues
- Security issues

Read more here

2020-09-15 Smart-Card update procedure for several card-reader types

If you have the card-reader mentioned below and last Dongle firmware update attept was failed do the next:
- Insert smart-card into another card-reader
- Update Dongle firmware: do it ONLY ONCE even in case of error

The next card-readers shold be moved to TRASH immediatelly:
- USB Fenix Card Reader
- DITS CCID Smart Card Reader
- DITS Ezy Smart Card reader Module SC

2020-09-07 Infinity Online Service (IOS) updated - new software activation available

AMT-Dongle software activation for Infinity users is ready, you can activate this software for any Infinity product smart-card

Read more here

2020-09-04 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.07 - UltraReading & New Features activated

As ordinary, unique functions and methods released

Core
Changed : FlashCore Protocol updated
BugFix : SC9832E line support updated
BugFix : SC9820E line support updated
BugFix : SC9863x line support updated
NewFeature : eMMC ReadOnly check for DLv4 and later ( automatic during boot )
Changed : All service features speed under FlashMode increased

Flasher
Changed : Flash Engine updated
Changed : FastFlash protocol updated

Service
BugFix [Identify] : FS state detection may fail for legacy SPD line, fixed
Changed [Identify] : SelfLearn / Automatic DB update during "Identify" rebuild
Changed [Identify] : Support detection of AES and RSA-enabled auth in devices/loaders
Changed [Identify] : Support correct BASE <-> DEVICE verification for optimal loader selection
BugFix [Read Privacy] : Privacy Lock reading on some devices may fail , fixed
NewFeature [Read Privacy] : Mobile AntiTheft password reading ( another version of "privacy lock" )
BugFix [Format FS] : Fixed Format FS in DiagMode for Android 10 and modern Android 9 devices

Firmware Reader
Changed : Complete FWReader rebuild to cover most count of different devices, existing on market *
!* Almost all Flashing issues has been fixed, FWRead repeat required for problematic cases/models!
Changed : UltraReading option activated ! *
!* Now reading of UniSoc devices 3-5 times faster, than before
- approx 20 mins instead of 70 for SC9853i (2.2 GiB) comparing to older releases
- approx 12 mins instead of 40 for SC9832E (2.5 GiB) comparing to older releases
- approx 20 mins instead of 60 for SC9863 (4.4 GiB) comparing to older releases
- approx 15 mins instead of 50 for SC7731 (1.5 GiB) comparing to older releases
!* Most generic loaders now support FastReading ( RS,SS,0S,1S,2S )
- Use USB-2 port !
- DO NOT use USB-3 port !
- DO NOT use USB-HUB !
Changed : Improved structure identification
Changed : Support more different types
Changed : Android 10 devices support improved

Model DB
Changed : New Generic loaders included and updated existing ones
Changed : SC9820E(eMMC), SC9832E, SC9863x loaders updated

Other
BugFix : Minor changes and fixes
Changed : Power Reset/Switch off scenario operation-depend now
Option : GUI ( File -> GUI ) : Allow select other interface mode*
!* Default interface - standard V2 line GUI
!* Wide interface - best for big screen / big distance to monitor
!* Wide log - extend log window to screen size - optimal for most cases

Read more here

2020-09-03 Infinity Data Explorer v1.09 - MTK, SPD, RDA updated and more improvements

Data extraction based on full reconstruction of file system

- MTK module improved - more device supported
- SPD module updated - SPD66x0 support released
- RDA module updated - more Code pages supported
- GUI updated and improved
- Minor bugs fixed

Read more here

2020-08-24 Infinity Chinese Miracle-2 MTK/Mediatek v2.15 - New models and features

As ordinary, unique functions and methods released

Core
Changed : Loader v2028 supported and tested ( v2020 skipped, unstable )
Changed : Protocol updated ( Raphael/Legacy )
NewChip : MT8167 supported ( AutoBoot, SelfLearn supported )
BugFix : MT8163 support should be fixed

Flasher
Changed : UltraFlash - UNIQUE FEATURE !
Changed : UltraFlash : It is possible to fix Almost all SECURITY-related (PUBKEY etc. verify/missmatch) errors ( Mostly when wrong DA used on EFUSED models )
!* Feature may not work for some "exotic" secure/da/fuse configurations and cases !
!* Feature not work with "remote authentificated" devices yet !

Service
Changed : Identify
!* Better AndroidInfo extraction, activated check and filter of similar fields
!* It is possible to read more different info about device, if possible ( can be activated from settings )
Changed : Smart Reset
!* Optimized support for different customized and generic cases

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types
Changed : More careful checking of vendor, security and ota-specific data
Changed : DevInfo ( FWname ) creation optimized
Changed : Slow devices reading revised ( MT8167, MT6570, MT6580 and similar )
!* It is strongly recommend to enable autoupdate or use latest MT2 version to service latest Android 9/10 phones/tablets !

MemoryTool
Changed : Bugfixes and optimizations

Model DB
Changed : New agents included for various set of devices ( Alcatel, Moto, Acer, Generic )
Changed : DB revision done, some issues fixes

Other
BugFix : Many minor changes and fixes

Read more here

2020-08-12 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.06 - Android 10, FastRead, FastFlash

As ordinary, unique functions and methods released

Core
Changed : FlashCore Protocol updated
Changed : DiagCore Protocol updated
Changed : NAND protocol adaptation
Changed : Operations speed increased

Flasher
Changed : Flash Engine updated
Changed : Handling for 64bit files optimized
Changed : Activated FastFlash V1 protocol *
Changed : Activated FastFlash V2 protocol *
!* FastFlash protocol allow increase flashing speed for big unsparsed images
!* FastFlash protocol reduce flashing time up to 4-6 times, depend on device configuration - 3-4 minutes against 20-25
!* FastFlash activated automatically, if can be performed
!* GOOD USB cable and GOOD USB port must be used - do not use USB HUBs !
Changed : Support for new PAC formats activated: v2.x.x line

Service
Changed : Identify scheme : Read more accurate and complete info *
!* Include modern Android 9 and Android 10 devices
Changed : Precise FileSystem settings detection ( Type and Encryption algo )
Changed : Better security detection
Changed : Format FS / Reset settings updated

Firmware Reader
Changed : Reading speed up to 30% faster ! *
!* Test feature, support modern UniSoc devices: SC7731E, SC9832E, SC9863
!* Test feature, only RS-featured loaders supported !
Changed : Android 10 support activated! *
!* Support latest Android 9 and modern Android 10 devices from now!
!* Allow read complete firmware image from Android 10 devices without loss any ota/vendor abilities
Changed : X64 devices/loaders native support activated for complete reading
Changed : SW now create Android-version depend images for better compatibility
Changed : SW now create correct FileSystems bundle according device settings *
!* Almost reducing "hang" case after flashing
Changed : Improved structure identification
Changed : Support more different types
Changed : Structure identification and NAND reader more stable now (complete E-series NAND adaptation is on the way)

Model DB
Changed : New loaders included for various set of devices
Changed : New Generic loaders included and updated existing ones

Other
Changed : Removed outdated options from platform tab, many options changed to atomatic mode
BugFix : Minor changes and fixes

Info :
Android 10 enabled devices : SC7731E, SC9832E, SC9863
FastFlash enabled devices : SC9832E, SC9863

Read more here

2020-08-11 Infinity Shell v2.00 released

- user interface changes
- server communication process updated
- software update downloading method updated
- product news downloading method updated
- models database update method improved
- many internal changes

Read more here

2020-08-04 Infinity Pinout database v2.00 released

Information about boot keys, pinouts, test-points, hardware updated

NOTE:
- pinout v2.00 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there and not deleted
- Infinity Shell will be updated to work with pinout v2.00 in some time

Read more here

2020-07-27 Infinity Chinese Miracle-2 MTK/Mediatek v2.14 released - UltraFlashing activated !

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
NewChip : MediaTek Dimensity line ( MT68xx ) support under test

Flasher
New Feature : UltraFlash - UNIQUE FEATURE !
!* ALLOW IGNORE MOST EXISTING SECURITY/FUSE/DA RESTRICTIONS and forcedly flash protected regions
!* Feature support Whole RAPHAEL line from MT6731 to MT6785. Vendor and security settings configuration in most cases is not important.
!* FEATURE CAN FLASH ANYTHING SIGNED/UNSIGNED TO PROTECTED AND/OR VERIFIED REGIONS
!* Tested with Huawei, Vivo, Infinix, Tecno "protected" and other models
!* Feature may not work in some "exotic" secure/da/fuse configurations and cases!
!* Feature not work with "remote authentificated" devices yet!

Service
Changed : Reset PrivacyLock updated
!* Action selection now depend on different factors ( Android 6, 9 issues fixes )
Changed : Smart Reset
!* Optimized support for Android 5, 6
!* Optimized support for "customized" cases

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types

Model DB
Changed : New agents included for Tecno, Infinix devices devices ( G70/G80/G90 )

Other
BugFix : Minor changes and fixes

Read more here

2020-07-14 Infinity Chinese Miracle-2 MTK/Mediatek v2.13 released - Android 10 and new SoC types

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
NewChip : MediaTek MT8765 supported
NewChip : MediaTek MT8766 supported
NewChip : MediaTek Helio G70 supported
NewChip : MediaTek Helio G80 supported

Service
Changed : Identify
!* More accurate FS state detection
!* Support for different "customized" devices identify - Huawei and similar
!* Support for A/B structure devices for read complete info - Nokia, Doogee, Infinix and similar
!* Support GSI/Trebble devices for read complete info
!* Android 5/6 devices fixes

Changed : Smart Reset
!* Optimized support for Android 5, 6, 10
!* Optimized support for "customized" cases - Oppo, Vivo, Huawei and similar
!* Optimized work with GSI/Trebble/A/B devices

Firmware Reader
New Feature : Android 10 supported!
!* Read FW result is completely factory-like
BugFix : Work with big partitions ( more than 4 GB )
Changed : Logical FileSystems sparsing supported
Cahnged : More intellegent identify of unknown layouts
Changed : Improved structure identification
Changed : Support more different types
Changed : Android version-depend additional data creation

Model DB
Changed : New agents included for Xiaomi devices ( G70/G80/Dimensity )

Other
BugFix : Minor changes and fixes
GUI : Store last used FormatMode enabled

Thanks to : kamal_singla, gracy_elec and all other friends !

Read more here

2020-07-01 Infinity Chinese Miracle-2 MTK/Mediatek v2.12 - F2FS support, EncryptInfo and more

As ordinary, unique functions and methods released

Core
BugFix : Some legacy chips support may broken, fixed (Agent 19xx-20xx)
BugFix : BROM mode support fixed for MT6752/MT6753

Service
Changed : Identify procedure updated, read more useful info on Android 10 devices
!* From now on for modern Android ( 7 - 10 ) shown more detailed UserData state with encryption methods
!* That replace old ENCRYPTED/PLAIN states to avoid false-positive results for forensic cases
!* It may work not stable on earlier Android releases, it is recommend to check state also via MemoryTool if required
New Feature : Smart Reset ( Format FS option )
!* Support RAPHAEL line in SMART mode, not need change any options
!* Function detect correct settings automatically to avoid user from mistakes
!* Function detect correct file systems, include modern F2FS, and all variants of EXT filesystem to support wide range of old and modern devices
!* Function detect and reset all settings, include FRP and Privacy Locks ( for USER DATA SAFE methods - USE SEPARATE OPTION!!!!! )
Changed : META : Attestation Keys download procedure updated

Firmware Reader
New Feature : F2FS file system detection and creation supported
Changed : Improved structure identification
Changed : Support more different types
Changed : Combo scatter creation revised
Changed : Platform and version depend scatter creation for better compatibility with SPFT
Changed : Android version-depend additional data creation

MemoryTool
Changed : Structure identification
New Feature : Build FILE SYSTEM at selected partitions
!* Allow make F2FS, EXT4 old and EXT4 modern variant of filesystem at selected partition
!* Select need partition ( for prevent mistakes - just one partition per operation allowed ) and desired filesystem
!* Useful also in case of unlocked devices with change FS or encryption method needs

Flasher
New Feature : Android 10 specific changes on verification and file selection
Changed : Selection order modified according last changes of build SDK's and vendor-specific cases
Changed : Scatter tab changes, specific to multi-storage selection and settings

Model DB
Changed : New agents included for Tecno, Infinix, Itel, Panasonic, Walton brands ( with different SoC lines in every )

Other
BugFix : Minor changes and fixes

Read more here

2020-06-22 Infinity Data Explorer v1.08 - Search Engine updated, SPD improvements and more

Data extraction based on full reconstruction of file system

- SPRD engine rebuilded
- contacts save method updated
- long SMS parse method updated
- HTML export released (via templates)
- gui: log autoclear option before new operation
- gui: pop-up menus for log (clear and save options)
- folder with date/time creation for Converter
- Minor bugs fixed

Read more here

2020-06-14 Infinity Chinese Miracle-2 RKT/Rockchip v2.02 - New chips and latest Android support

As ordinary, unique functions and methods released

Core
BugFix : Connection stack updated
BugFix : Compatibility with latest drivers releases
Changed : Core rebuild for support modern SoC's and old SoC's revisions with Fuse/SecureBoot support

Support RK29xx series ( NAND )
Support RK30xx series ( NAND, eMMC )
Support RK31xx series ( NAND, eMMC )
Support RK32xx series ( NAND, eMMC )
Support RK33xx series ( NAND, eMMC )
Support RKPX5 series ( NAND, eMMC )

Service
Changed : Identify procedure rebuild. Complete info reading and parameters detection
!*If Identify CAN NOT display SWVersion details it may means device can not be serviced for FWRead operations
Changed : FRP reset revised to support latest Android versions and Modern SoCs
Changed : FS format revised to support latest Android versions and Modern SoCs

Firmware flasher
New Feature : Modern RK UnionImage flashing supported
New Feature : Combined Sparse image flashing supported
New Feature : Repartition for RK-PARA and RK-GPT supported
New Feature : Factory (UnionImage) Firmware flashing for latest Rockchip SoCs versions/revisions
Changed : Support Infinity Firmware Flashing ( Old and Modern SoCs revisions )

Firmware Reader
New Feature : Android 7 devices supported
New Feature : Android 8 devices supported
New Feature : Android 9 devices supported
Unique : Firmware read allow read FW from "unreadable" Android 8/9 devices
!*Feature support eMMC and NAND devices which can not be dumped by any tools over native protocol ( No Root / ADB need )
!*Feature support some "slow" NAND cases on modern SoC's
!*Feature may not work on some NAND devices with FTL/ECC errors and Flash Faults
Changed : Improved structure identification
Changed : Support more different types

Other
BugFix : Minor changes and bugfixes
Drivers : New driver package with Win8/Win10 x86/x84 are at support area
Info : SW may work not correct in some cases with RK29xx and RK31xx OLD NAND 4.x devices
Info : New driver installation is REQUIRED for correct work !

Read more here

2020-06-13 RKT (Rockchip) drivers package updated

Drivers_RKT_DrvAssist_v4.91 available for download at support area

2020-05-28 Infinity Online Service (IOS) updated

- New cheaper prices for Xiaomi Mi Account remove any model (clean only): EU countries, Ukraine, Belarus, Kyrgyzstan
- Xiaomi Mi Account remove for activated phones (clean only)

2020-05-23 Infinity Chinese Miracle-2 MTK/Mediatek v2.11 - New features activated

As ordinary, unique functions and methods released

Core
BugFix : META protocol updated
Changed : Loader v2012 supported and tested

Service
Changed : Identify in META now read NVRAM dump that is compatible with flash mode writing
!*Feature may not work on old devices - Android 4.x, MT6572 and similar legacy chips
!*Feature useful also for devices which can not connect via flash mode as security save way

Changed : Identify now also verify EXTRA security flags
!*Signed types detection ( RSA signed security items )
!*Encrypted types detection ( Vendor-modified security items )
!*Edit/Repair security on those types IS NOT possible at the moment !
!*Swap security on those types IS NOT possible at the moment !

New Feature : Google Attestation key installation
!*Allow upload attestation keys to devices which require it ( Google Key red mark in phone after complete boot )
!*In most cases it model-depend file!
!*SW DO NOT allow select wrong file ( non attestation-key file ) by verify content of file
!*Files in most cases delivered with factory fw package ( kb.bin , Android_Key and other similar )

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types

Flasher
Changed : File selection optimized for latest build revisions - multi-bundle etc.

MemoryTool
Changed : Init PMT procedure updated (NAND, EMMC, UFS)
Changed : Init Preloader procedure updated (NAND, EMMC, UFS)

Other
BugFix : Minor changes and bugfixes
BugFix : Compatiblity issues fixes

Read more here

2020-05-21 Infinity Chinese Miracle-2 MTK/Mediatek v2.10 - usb drivers compatibility issue

How to use CM2MT2 v2.10 safely:

- Wait and install CM2MT2 v2.11 in a short time or make the next right now:

- Find and delete (or rename) the next applications:

C:\Program Files (x86)\Intel\Bluetooth\devmonsrv.exe
C:\Program Files (x86)\Intel\Intel(r) usb 3.0 extensible host controller driver\application\iusb3mon.exe
C:\Program Files (x86)\Nec Electronics\usb 3.0 host controller driver\application\nusb3mon.exe
C:\Program Files\Renesas Electronics\usb 3.0 host controller driver\application\nusb3mon.exe
C:\Program Files\via xhci uasp utility\usb3monitor.exe

- Reboot PC
- Run CM2MT2 v2.10


What is the issue ?

Software compatibility issue has been detected, it's a software conflict with some kind of usb drivers.
As a result users may expeience problem like dongle misconfiguration with error code 70 and similar.
New CM2MT2 version with improved compatibility should be released in nearest time.


What to do in case of dongle misconfiguration error code 70:

- Write HERE your dongle details - S/N or HWID
- Attach fault.bin file, it's located at C:/InfinityBox/CM2MT2/ folder
- Wait for instruction

Read more here

2020-05-20 Infinity Chinese Miracle-2 MTK/Mediatek v2.10 - New MTK chips and UFS storage

As ordinary, unique functions and methods released

Core
NewChip: Helio G90T (Formely MT6785) supported (UFS / eMMC)
NewChip: MT6731 supported (eMMC / NAND)
NewChip: Helio A20 (Formely MT6761 low-cost revision) supported
NewChip: Helio P90 (Formely MT6779) support under test (UFS / eMMC)
BugFix : MT6595/MT6597 BROM support broken, fixed (Agent 17xx-19xx)

New Feature : UFS FlashIC support
!* Support flashing Factory / Infinity FW
!* Support MemoryTool
!* Support Factory Firmware reading
!* Support Service operations
!* SOC's on market, support UFS chips right now : G90, P70, P90

Service
Changed : Repair security procedure updated (Flash and Meta mode)
Changed : SPUnlock procedure updated (Flash and Meta mode)
Changed : Identify procedure updated
Changed : Format FS / Reset FRP now support UFS flash too
New Feature : Modem Re-Init (NVfix)
!* Useful after FixBB, in case of modem subsystem alive

Firmware Reader
New Feature : UFS flash support
New Feature : Combo scatter creation for newest chipset
!* Produced scatter MAY NOT work with OLDER SPFT (factory flasher) below 19xx versions!
!* Produced scatter is 100% like factory ones
Changed : Improved structure identification
Changed : Support more different types
Changed : NAND support revised
Changed : LEGACY line support revised
Changed : Platform and version depend scatter creation for better compatibility with SPFT
Changed : LEGACY line with Android 9 (MT6580 and similar) specific changes

MemoryTool
New Feature : UFS flash support
!* Support Read , Write , Erase partitions
!* Support RePartition
!* Support Preloader init
!* Support Change Work mode (ADR / PRT)
!* Change storage settings useless, all flash content mapped in single mode
Changed : Structure identification
Changed : Automatic files selection at folder change

Flasher
New Feature : Support COMBO scatter's (v2.xxx)
!* Automatic selection depend on device Flash (UFS/EMMC/NAND)
!* Storage selection done automatic according detected, for end-user all selection and rest settings remain same as before
New Feature : Support MTK chips with UFS FlashIC flashing
!* All features (Erase / Verify / PMT upgrade / Backup / HW Compatibility) work for devices with UFS as well
Changed : Scatter tab changes, specific to multi-storage selection and settings

Meta protocol functions updated
Changed : Updated security detection feature
BugFix : Updated structure verification

Other
BugFix : A lot of minor changes and bugfixes applied
Changed: Many internal changes to improve compatibility with other applications, antiviruses and similar software.
Changed: Software load/operation speed improvements implemented

Read more here

2020-05-14 DongleManager v1.79 released

- smart-card database updated with new smart-card types
- minor gui changes
- error messages text updated

2020-05-06 DongleManager v1.78 released

- minor gui changes
- installed modules detection method updated

2020-04-30 Infinity Chinese Miracle-2 SPD/UniSOC v2.05 - NAND, KaiOs and new features

As ordinary, unique functions and methods released

Core
NewChip : SC7731E with NAND ( KaiOS and MocorDroid5 )
NewChip : SC7715x with NAND ( KaiOS , MocorDroid5 , Android 4x)
NewChip : SC9820x with NAND ( MocorDroid5 , Android 4x)
Protocol : Speed increased for most operations ( SPD and UniSOC )
Protocol : Protocol changes according SPD/UniSOC R23 line

New Feature : NAND support ( SPD and UniSOC generation )
!* Support flashing Factory / InfinityFW
!* Support correct flash selection and servicing phones with NAND
!* Support InfinityFW reading ( Complete, Factory-Like )
!* Support Service operations

Service
Changed : Repair security procedure updated (Flash and Diag mode)
Changed : Identify procedure updated
!* Support complete and fast NAND devices identification
!* Support complete simlock info structure identify and verify
!* Support multi-nv structure detection and security info detection
!* Database update / self-learning updated
!* FileSystem identification support UBIFS and F2FS detection
Changed : Format FS / Reset FRP procedure updated

Firmware Reader
New Feature : NAND support
!* Support old and new generations ( SPD and UniSOC )
!* Support plain Android , KaiOs and MocorDroid5 OS
!* Automatic and correct FileSystem creation for NAND devices
!* Support all security types, include UniSoc secure/signed
!* Produced FW is 100% like factory one
Changed : FileSystem creation engine updated ( UBIFS support , bugfixes )
Changed : Improved structure identification
Changed : Support more different types
Changed : Old SPD line support rebuild ( SC7715,SC7731,SC983x,SC9820x )
Changed : Fixed FW creation in full manual / skip verify mode settings

Flasher
New Feature : Complete flash erase ( whole flash format ) during flashing ( eMMC / NAND )
New Feature : Correct NAND flashing support ( SPD and UniSOC ) ( Factory PAC and InfinityFW )
Changed : Flashing core for InfinityFW more stable

Loader Database
NewChip : SC7715 BASE NAND revisions included
NewChip : SC9820 BASE NAND revisions included
NewChip : SC7731E BASE NAND revisions included
NewChip : SC7731E BASE eMMC LOW_MEM revisions included ( cheap A8-A9 devices )
NewChip : SC7731x BASE eMMC LOW_MEM revisions included ( old A4-A5 GEA devices )

Other
Changed : Manual mode : automatic structure and setting detection in manual mode
Changed : Automatic base settings selection for BASE loaders ( Protocol, Charging, FlashSettings )
Changed : Separate NAND mode option activated in platform settings for manual mode
BugFix : Lot of minor changes and bugfixes
Changed : Software compatibility with other applications improved

Read more here

2020-04-24 Infinity-Box/Dongle support renew orders in April 2020

- Dongles/Boxes renewed in April 2020 for 1 year will be renewed for 14 months - two additional months free
- Dongles/Boxes renewed in April 2020 for 2 years will be renewed for 26 months - two additional months free

2020-04-22 Information about Infinity products support period renew due to situation with COVID-19

Two months support period extend for free for all users

Read more here

2020-04-18 DongleManager v1.76 released

- minor gui changes
- external activation detection method updated

2020-04-04 Infinity Chinese Miracle II SCR/SPD-RDA v1.06 - New models and features

As ordinary, unique functions and methods released

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
SpreadTrum: SC68xx ( with external PAC )
SpreadTrum: SC7702 ( with external PAC )
UniSoc: SC6531E, SC6533, SC6533G, SC7702
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

Core
NewChip: Support UNISOC 8910 (FLASH) under test
NewChip: Support IVY IoT (FLASH/SVC) under test
Changed: UpToDate Protocol changes for latest FP platforms ( UniSoc )
BugFix: Connection on SPRD tab
BugFix: BOOTROM mode on latest SC6533G branches

Support UNISOC 8910DM / UIS8910 chipset ( SVC mode )
- Identify ( Security info, compilation info, modem info , APinfo )
- Format FS / Reset Settings
- Read UserCode / PrivacyCode
- Repair Security
!* Generic types only

New Feature: SVC ( Diag ) mode support for SPRD / UniSoc
- Identify ( Security info, compilation info, modem info )
- Format FS / Reset Settings
- Read UserCode / PrivacyCode
- Repair Security
!* Generic types only

Service
BugFix: Security repair not allow use some "non-standard" combinations ( RDA / SPRD / UniSoc )
Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc )
Changed: GUI revised for repair part ( CS info, Automatic complete at double click for security fields )

UserData
BugFix: Security code read in FlashMode revised ( SPRD )

Other
BugFix: Lot of small different changes and fixes

Read more here

2020-04-02 Information about Infinity products support period renew and other features due to situation with COVID-19

Information about Infinity products support period renew and other features due to situation with COVID-19

Read more here

2020-04-01 Special offer for users/sellers with Infinity Lanaguage Editor smart-card dongle and/or Infinity Content Extractor smart-card dongle on hands

If you are an owner of a separate Infinity Lanaguage Editor smart-card dongle and/or separate Infinity Content Extractor smart-card dongle there is an option to convert that dongles to Infinity-Box/Dongle or to Infinity [BEST] dongle with small charge.

Read more here

2020-03-16 Infinity Data Explorer v1.07 - SPRD engine rebuilded and more

Data extraction based on full reconstruction of file system

- SPRD engine rebuilded
- contacts save method updated
- long SMS parse method updated
- HTML export released (via templates)
- gui: log autoclear option before new operation
- gui: pop-up menus for log (clear and save options)
- folder with date/time creation for Converter
- Minor bugs fixed

Read more here

2020-03-11 Infinity Data Explorer v1.06 - Android contacts/sms support and more

Data extraction based on full reconstruction of file system

- Contacts and accounts reconstrucion from Android storage contacts2.db
- SMS messages reconstrucion from Android storage mmssms.db
- Data storage engine rebuilded
- TXT file storage format updated
- Minor bugs fixed

Read more here

2020-03-07 Infinity Chinese Miracle-2 MTK/Mediatek v2.09 - SP-unlock for modern platforms and more

As ordinary, unique functions and methods released

Core
BugFix : SelfLearning ( Automatic Boot Selection ) feature updated
!*In some cases may require repeat learning for some platforms

New Feature : Enter META from BROM mode
!*Support LEGACY legacy
!*Support RAPHAEL line
!*In case of secure fuse, auth can be used ( setup in model selection, or manual select as AUTH file )
!*May not work in TestPoint cases on some platforms

Service
Changed : Repair security procedure updated (Flash and Meta mode)
Changed : SPUnlock procedure updated (Flash and Meta mode)
Changed : Unlock in Meta mode activated for modern platforms ( MT6739 and newer )
Changed : Identify procedure updated

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types
BugFix : Fixed some old platforms support

MemoryTool
Changed : Path Selection now automatically select files in WRITE FILE fields if they are exists in selected folder

Flasher
BugFix : Fixed flashing for old slow platforms ( MT6735 / MT6580 )

Meta protocol functions updated
Changed : Identify now read all Android info, like in FlashMode
!*Feature will not work on old devices ( Android 4.x, MT6572 and similar legacy chip typess )
Changed : Updated security detection feature
BugFix : Updated different Legacy and Modern platforms support
Modem warmup not cause fatal errors on some old phones
Modem-less devices detection ( wifi tablet / smartwatches )
Changed : Format FS revised
*!Some models can not be reset with that feature ( found in some Oppo )
BugFix : Updated structure verification
Changed : Repair Security rebuild, support more types and non-standard cases

New Feature : SP Unlock
Tested and confirmed as working in LEGACY line ( Teseted with MT6735, MT6580, MT6752, MT6753. Should works on other legacy chip types )
Tested and confirmed as working in RAPHAEL line ( Teseted with MT6739, MT6761, MT6755, MT6750. Should works on other Raphael chip types )
We are looking for user reports and interest test cases

Other
BugFix : Some minor changes and bugfixes

Read more here

2020-02-25 Infinity Chinese Miracle-2 MTK/Mediatek v2.08 - New models and repair features

As ordinary, unique functions and methods released

Please do not forget to download new drivers v5.1632_x86_x64 !

Core:
Changed : Loader v1952 supported and tested
BugFix : Rebuild support for MT6572 line ( KaiOs and old devices )
Changed : Automatic selection of higher available BASE loader at startup
Changed : Automatic protocol switching for RAPHAEL line
Changed : Initial META protocol support
Changed : AutomaticBoot selection revised. More types and combinations are supported.
Changed : Protocol updated for RAPHAEL line

New feature : Meta protocol support activated
!*Support Legacy line ( MT6572 .. MT6595 )
!*Support Raphael line ( MT6750 .. MT6797 )
!*Support Modern Raphael line ( MT6761, MT6765 and newer )

Function : Identify ( AP/MD, SWversion info, Security details )
Function : Reset Settings / Format FS ( NOT touch FRP )
Function : Repair security for
Legacy line ( from MT6572 and up to 6580 )
Raphael line ( from MT6570 to MT6765 etc. )

!*Devices with SLA will not work for repair without auth! ( even if Meta started )
!*Devices with OTP will not work for repair! ( SW will just show write error )

Service:
Changed : Format FS procedure updated
BugFix : Identify procedure updated and revised
Changed : eMMC life counter check ( Raphael, more accurate status handling for latest loaders )

UserData:
Changed : Reset Privacy Locks procedure updated

MemoryTool:
BugFix : Long-run reading optimized for RAPHAEL line

Firmware reader:
Changed : Updated support for legacy platforms
Changed : Updated support for MT6739 FP-like and KaiOS phones
Changed : Local database update
Changed : Data verification improved
Changed : More types supported

Flasher:
BugFix : In some cases were made wrong SV5_BL image selection for EMI base
Changed : Protocol updated for RAPHAEL line
Changed : Protocol update for LEGACY line
BugFix : Flash Erase ( whole mode ) revised
BugFix : Flash Pre-Erase ( safe upgrade mode ) revised

Other:
Changed : Boot helper updated. Take attention to software logs and follow them. In most cases that enough to setup correct settings
New feature : Reboot option activated in main tab. Switch charge / power off mode after operations
New feature : META switch option activated in main tab. Used to switch SW between FLASH and META mode
Changed : Loader database updated
Changed : Minor changes in GUI, check buttons/fields hints to know more about alternative modes and special options of supported functions

Info:
META require working device condition. Charged battery (more than 20%). Installed drivers.
New drivers v5.1632_x86_x64 is at support area.

Read more here

2020-02-24 Infinity Data Explorer v1.05 - MTK functions for SMS released, Heuristic engine updated

Data extraction based on full reconstruction of file system

- SMS extraction for MTK activated, supports multipart sms supported as well
- Heuristic engine updated - more data can be found/extracted from the unknown dumps
- GUI improved
- Minor bugs fixed

Read more here

2020-02-03 Infinity Data Explorer v1.04 - SPD functions improved, Heuristic engine updated

Data extraction based on full reconstruction of file system

- SMS message extraction for SPD released. Multipart SMS messages are supported
- Heuristic engine updated - more data can be found/extracted from the unknown dumps
- GUI improvements
- Minor bugs fixed

Read more here

2020-02-02 Infinity Online Service (IOS) updated

New products: Xiaomi Mi Account remove any model (clean only) - Russia, Ukraine, Turkey, Kyrgyzstan, Kazakhstan, EU countries, Belarus, Nepal, India

2020-01-30 Infinity Online Service (IOS) updated

New product - Huawei FRP Reset Key (all models) by Serial Number

2020-01-27 Infinity Online Service (IOS) updated

New product - Xiaomi Find Device check Clean or Lost status

2020-01-14 Advertize your YouTube channel with Infinity software video

Advertize your YouTube channel with Infinity software video

Read more here

2020-01-12 Infinity Chinese Miracle-2 SPD/UniSoc v2.04 - Xiaomi, KaiOs, RepairSec, PACv2 and more

As ordinary, unique functions and methods released

- Support for PACv2 format activated
- Core updated
- Protocol updated
- SC9820E support activated ( Generic and Secure types )

- Repair security option activated
Allow repair device security items on generic devices
Work in Flash mode
Work in DiagChan mode
SimLock-enabled devices may NOT work
Security-enabled devices will NOT work

- Firmware Flasher updated
Updated core
Updated PAC types support
Revised NVManager

- Firmware Reader updated
More accurate data verification
Reading speed optimized for some UniSoc models
Android version-depend mode activated ( allow avoid flashing issues on android 9 and newer )
KaiOS devices supported ( SC7731E eMMC, SC9820E eMMC tested and working ) now for Read Firmware

- Identify procedure revised
Now it also support for security verification ( signed NV )
Better FS state verification
More usable build props info extraction

- Revised manual mode selection and possible combinations ( can combine firmware and loader from any source )

- Loader database
SC7715 eMMC loaders included
SC9820 loaders updated
SC9863 loaders updated
SC9820E eMMC loaders included
Various range of models from Wiko, LYF, BLU, BQ, Symphony, Itel and others included in DB

- Other
Bug fixes and changes according users requests

- Extra
Xiaomi QIN 1S+ supported ( Identify, Repair, Firmware Reading, Reset Settings ) BKey : Call button
Xiaomi QIN 2 supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button
Xiaomi QIN 2 Pro supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button

Special thanks to respected Mr. gracy_elec

Read more here

2020-01-08 Infinity-Box [BEST] NK2 v1.20 - 220.4G, 2.3 and more !

HMD Nk 220 4G (2019)
Nk 220 4G - TA-1148, TA-1155, TA-1171
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode
- Backup security

HMD Nk 2.3 Ironman
Nk 2.3 - TA-1206, TA-1209, TA-1211, TA-1214
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

- Base
Loader database updated
ModelFinder updated
Bugfixes and minor changes

- MTK SP
Flash Engine updated
Updated loader database
Nk 2.3 support activated in standalone mode

- SPD FP
SVC engine updated
Nk 220 4G support activated ( partial )
UserCode reading revised
Identify revised

- Support
New firmwares for supported models can be found at support area
New drivers for 105/110/220 can be found at support area

Read more here

2020-01-07 Updated SPRD drivers for [BEST]

Updated SPRD drivers uploaded to [BEST] support area.
Please read note before use !

2020-01-05 Laelo tool new version 0.75 released

Laelo tool new version 0.75 released

Read more here

2019-12-27 Infinity Data Explorer v1.03 - RDA based firmware images are supported and more

Data extraction based on full reconstruction of file system

- MTK module improvements
- RDA based firmware images are supported
- Show Additional info (IMEIs, User Code) for RDA based firmware images
- GUI improvements
- Minor bugs fixed

Read more here

2019-12-18 Infinity Chinese Miracle-2 MTK/Mediatek v2.07 - New models and features

Core:
NewSOC : MT6785 support under test
NewSOC : MT6885 support under test
Changed : Protocol updated for RAPHAEL line
Changed : Protocol updated for LEGACY line
BugFix : MT6752 support fixed
BugFix : MT8172/MT8173/MT8176 BROM support fixed
BugFix : MT6570 support fixed
Changed : EMI engine revised
Changed : AutomaticBoot selection revised. More types and combinations are supported.
Changed : Loader v1924 supported and tested
Changed : Loader v1936 supported and tested
Changed : Loader v1944 supported and tested

Flasher :
New feature: unmerged signature support
- Files with external signatures now flash correctly
New feature: Forced mode for Raphael line
- Allow automatically skip repartition, erase operations if it was not allowed without break flashing
New feature: WHOLE Flash Pre-Erase
- Erase whole USER region. Destroy ALL data include unique and secure one! Support both Modern and Legacy lines.
Changed: Repartition procedure rebuild to support modern devices and special cases (user memory issues and other fixes)
New feature: Smart erase
- In manual mode selection and enabled pre-erase all unchecked partitions will not be touched
- Storage boundary checks now works correct on legacy and modern lines

Firmware Reader / Maker:
Changed: Local DB updated to latest version
Changed: Scatter creation support latest platforms and variants
Changed: Scatter compatibility with SPFT optimized ( for DL only mode )
New feature: FileSystem creation and params now generated according Android version
New feature: Ability to skip "critical" partitions verification during read ( bl-unlocked devices and specific cases )

MemoryTool:
New feature: Switch working mode ( ADR - PRT options in global settings ) without tool restart (no need to exit and run software again)
New feature: Error ignoring on RAPHAEL line devices. Errors are not triggers shutdown anymore.
Changed: Update PMT operation rebuild. Support modern devices and use multiple factors now.
Changed: Init preloader operation. Support plain preloader dumps that was created by MemoryTool.
Changed: Partition listing style on LEGACY devices. In case of protected regions do not triggered shutdown anymore.
Changed: Write operation now handle correctly some sparse images used in Android 9 and newer versions

Service:
BugFix: Format FS procedure updated
BugFix: Reset FRP procedure updated
BugFix: Identify procedure updated and revised
New feature: eMMC life counter check during Identify
- Show, if possible by Agent or HW, storage life status. LifeCycleEnd(ReadOnly), LifeCycleNearEnd states.
- Support only Raphael newer than MT6739. Support NAND devices as well ( MT6570 )

UserData:
New feature: Reset Privacy Locks
- Support old and modern devices. Procedure is USERDATA SAFE if that required

LoaderDatabase:
Base Loader v1924 included
Base Loader v1936 included
Base Loader v1944 included
New TECNO sec agents included
New VIVO sec agents included
New ALCATEL sec agents included
New Hisense sec agents included
New Moto sec agents included
New Huawei sec agents included
New Lenovo agents included
And other different and generic models can be found in list

Other:
Changed: Base DB revised, unused and "buggy" types removed from BASE agents.
- Change settings if DA version not contain your device platform
Changed: EMIDb updated, more types supported
Changed: Preloader parser now shows more complete memory details

Thanks to:
Special thanks to respected Mr. gracy_elec
Special thanks to respected Mr. Kamal_singla

Read more here

2019-12-18 Infinity [BEST] support/renew policy updated

Please review updated support policy by link below. Thank you for your kind understanding and cooperation !

Read more here

2019-12-17 Laelo tool new version 0.73 released

More info available by link below

Read more here

2019-12-16 Infinity Data Explorer v1.02 - more devices and CPU types supported

Data extraction based on full reconstruction of file system

- MTK module updated: more device supported
- SPD based firmware images are supported (spd6530 - spd6531 cpu)
- Show Additional info (IMEIs, User Code) for SPD based firmware images
- Contacts save procedure improved
- GUI improvements
- Analyze engine improvements
- Minor bugs fixed

Read more here

2019-12-11 Infinity Shell v1.52 released

- models database updated
- models database update procedure improved

2019-12-04 Infinity Data Explorer v1.01 - new features and improvements

Data extraction based on full reconstruction of file system

- NAND flash types are partially supported
- Additional information extraction supported such as IMEI(s), User Code
- More contacts types are supported
- Open folder with result file(s) after finish: option can be enabled in `Settings` page
- Minor bugs fixed

Read more here

2019-11-27 Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features

- Core
Protocol updated
Error handling, error explanation and hint module updated

- Service
NVM operations revized
DiagMode option activated ( Platform -> Control -> DiagMode )
> Change SW mode to diag, instead of flash. Do not require BootSelection.
Allow for now:
1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
3. Read NV data, verify NV
> Don't forget change SW mode between Service/Flash for those operations !

New Identify option - device Platform, Device HW details identification
> Allow detect device SOC family, RAM amount for faster loader selection
> Work in DiagMode, Work ON MODERN and UNISOC chipset only !

- Flasher
Optimized flashing protocol
Optimized older device line support
NVManager updated - Identify, Backup, Security swap
NVManager Recovery tool updated

- Firmware Reader
Optimized structure identification
Activated "forced" reading. Option skip data verification.
> In case of semi-damaged devices, if backup atleast of something required
> In case of "Critical data damaged" errors
Optimized data verification during create FW

- Database:
SC983xx generic loader DB updated
SC9853i generic loader DB updated
SC7731E generic loader DB updated
SC7731x generic loader DB updated
SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony
SC7731c/g loaders DB updated - various models and RAM size
SC9832E loaders DB updated - Meizu, Wiko
Some other various models with specific hw settings included in loader DB

- Other
Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab )
Bug fixes and changes according users requests

- Special thanks to respected Mr. gracy_elec

Read more here

2019-11-24 Infinity Data Explorer v1.00 - Initial Release

- Data extraction based on full reconstruction of file system

- Initial features
1. Phonebook records extraction from dump
2. Phonebook records export to TXT, VCF formats
3. Memory type auto detection (Manual selection also supported)
4. File system parameters (sector size, header type) auto detection (Manual selection also supported)

- Supported devices:
MTK with NOR flash types, in most cases based on CPU types like MT625x, MT626x, and some MT622x

Read more here

2019-11-20 Laelo tool new version 0.72 released

More info available by link below

Read more here

2019-11-18 Infinity-Box [BEST] NK2 v1.19 - New models and features

HMD Nk 105 (2019) King
Nk 105 - TA-1174, TA-1203
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode

HMD Nk 110 (2019)
Nk 110 - TA-1192
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode

HMD Nk 6.2 Starlord
Nk 6.2 - TA-1187, TA-1198, TA-1200, TA-1201
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

HMD Nk 7.2 Daredevil
Nk 7.2 - TA-1178, TA-1181, TA-1193, TA-1196
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

- Base
Loader database updated
ModelFinder updated
Bugfixes and minor changes

- BL
Fixed Nk 2.2 flashing, Format FS, Reset FRP

- MTK SP
Updated loader database
MT6761 support activated ( Nk 2.2 line ) in standalone mode

- MTK FP
FlashEngine updated
FileSystem (Forensic) engine updated

- SPD FP
FlashEngine updated
Nk 105, Nk 110 support activated ( partial )

- Support
New firmwares for supported models can be found at support area

Read more here

2019-10-31 Infinity Online Service (IOS) updated

New product - Xiaomi country check by 12-symbols unlock-number

2019-10-29 Infinity Online Service (IOS) updated

New product - Xiaomi country check by imei

2019-10-27 Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and features

- Core
Protocol updated
Error handling, error explanation and hint module activated
SC9850 and similar devices WRITEFLASH security disable option enabled
> Use for custom / forced / service operation on secure-enabled SC9850 phones (in case of "AC SECURITY" error)

- Android 9 line devices tested and supported for Firmware reading!
- Self-Learning mode for Firmware Reader activated!
That feature allow analyze new and unknown devices "on the fly" and make complete and correct firmware
Just follow the SW instructions if need and you don't need to wait updates for latest devices

- Service
Security - NVM reading feature activated
> Allow read complete device factory calibration data, security items
> Save also modem info for cross-writing NV between different models
Security - NVM writing feature activated
> Allow restore / rewrite device factory calibration data, security items
> Allow use different modes during restore:
> 1. SWAP ( safe mode ) - if security alive SW will try swap security data
> 2. Complete restore ( rebuild mode ) - destroy ALL original security data if it was inside phone
Identify - better structure detection
Identify - BaseBand deep identification
> Allow read complete BaseBand info and read "MODEM TAG"
> Since nowdays there much SAME devices under DIFFERENT names but same by RADIO part - you may use NVM according that TAG
> TAG now saved during NVM read operation, you can use default Windows search bar in Backup folder to seek need TAG
UserData - PrivacyLock read feature activated
> Allow read PRIVACY lock password and details
> Support DIFFERENT models made by OEM "TRANSSION"

- Flasher
Optimized speed ( from 5% to 15% for UniSoc line )
Optimized PAC handling
Optimized older device line support ( SC7731GEA and similar from SPRD )
NVManager updated - Identify, Backup, Security swap, Verification
Activated new option - Re-Sparse.
> Allow prepare big filesystem images before flash. Useful for low-ram devices and adnroid 9 devices
> Use that option, if have face "INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!" error during SYSTEM flashing

- Firmware Reader
Android 9 line support finished, completely tested and confirmead as working
Vendor-specific mode activated. SW will identify "non-standard" devices and make firmware complete and correct now
> FOTA, vendor-specific features and rest stuff has been tested

- Database:
New generic boots included for SC7731C/G
New generic boots included for SC9863
ZTE lines devices included - A5(2019), A7(2019), L130, L8 and some others

- Other
Bug fixes and some changes according users requests

- Known issues :
[1] UniSoc line is SLOW. It is VERY SLOW! It may takes up to 3-4 times more time comparing with old SPRD.
[2] UniSoc devices with ARB active may dbe ead on wrong SW version flashing at Android 9 line.
We are checking that issue and collecting samples. According to users test and reports solution will follow.
[3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
[4] UniProt option active may lead to FLASHING problems on old SC7715-SC7731 line devices. Disable this option if you have a problem with old SPRD
[5] NAND devices on SC9820, SC7715, SC8830 are not supported yet for FW reading

Read more here

2019-10-22 Infinity Pinout database v1.66 released

New pinouts are in database, some information about boot keys and other information included

2019-10-19 Infinity Online Service (IOS) updated

New product - Xiaomi Mi Account remove (clean only) any model any country with cheaper price

2019-10-17 Infinity Online Service (IOS) updated

New product - Xiaomi get imei by 12-symbols unlock-number

2019-10-15 Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
UniSoc: SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL
RDA Micro RDA8826
Spreadtrum SC6533/G:

Updated LOD tools ( Factory LOD support revised )
UserCode reading improved

Spreadtrum/UniSoc SC6530/6531/A/C/D/E:

New feature activated: Complete identification
During Binary Dump selection SW will extract complete device info ( build version, time, HW details etc. )
During PAC file selection SW will extract complete device info ( build version, time, HW details etc. )
During Flash Reading SW will extract complete device info ( build version, time, HW details etc. )
Readout naming changed to DeviceInfo details instead of flash size/flash vendor

Repair security revised
Database revised, loaders updated ( extended range of supported SC6531EFM devices with 4-8MB flash )

Spreadtrum/UniSoc other:
Protocol updated, error codes handling activated
SC6531 with 16MB flash support revised
FTM during flashing now make DNVM clean, FS clean and structure verification
UserCode reading improved
Some other bugfixes and small changes

Info:
"HardLock" detection feature for SP-locked device activated under test

We are looking for SP-locked samples RDA Micro / UniSoc / SPDR FP platforms. Please contact to rd [at] infinity-box.com if you have units for test on hands.

Read more here

2019-10-08 iosFileUploader v1.09 released

- internal improvements, upload engine updated

Read more here

2019-10-03 Infinity Chinese Miracle-2 SPD/UniSoc v2.01 - UniReader Edition - Android 4-5-6-7-8-9

As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

- Core
Protocol updated
Alternate protocol support activated ( automatic switch depends on model )

- New Self-Learning engine for semi-supported devices !
In case of problem with device servicing - during identify session SW will make new database record
That record available from boot menu after that to use exactly for this device line
That will fix any incompatibility loader <-> device problems and remove any servicing issues

- Service
Identify - better structure detection, simlock state info
Identify - Userdata state detection optimized
Format FS - Forced Format revised

- Flasher
Optimized PAC handling
Optimized older device line support ( Sc7715-Sc9832 from SPRD )
NVManager updated - Identify, Security swap and verification, Recovery mode
Activated flashing of own FlashFile format files made by FWReader

- Firmware Reader activated!
Allow read ANY security level phone from Spreadtrum or UniSoc on almost all Android OS versions!

Support OLD SPRD line devices:
SC7715, SC7731, SC9820, SC9832, SC9850 and their revisions and modifications
Plain, Signed and RSA-enabled
Android 4, Android 5, Android 6, Android 7 lines are supported (higher versions were NOT released from SPRD)

Support NEW UniSoc line devices:
SC7731E,SC9832E,SC9863,SC9850,SC9820E and their revisions and modifications
Plain, Signed and RSA-enabled
Android 6, Android 7, Android 8, Android 9 lines are supported (lower versions were NOT released from UniSoc)
Arch32/Arch64 support

Support "SPRD"-like chipsets with Intel X86 arch
SC9853I and its modifications and revisions
Plain, Signed and RSA-enabled
Android 6, Android 7, Android 8 lines are supported

It is the only existing and complete solution ;)

Additional info:
Firmware use OWN format.
Firmware is COMPLETE one, allow to fix any sw-related state including FlashChip erase, change or complete SW rebuild
Unlike older SWReader version used in V1 line there is no need in bunch of additional re-connection operations or to make something special.

- Database:
New generic boots included, some boots updated

- Other
Bug fixes and some changes according users requests

- Known issues:
[1] UniSoc line is SLOW. It is VERY SLOW! Unlike SPRD ones, it consume x4-x5-x6 more time comparing to old SPRD.
We made almost all possible for now to speed it up. And that is limit for protocol.
In near time it should be some speed up to 20-30% but this solution still require some more time.
[2] UniSoc devices with ARB active may dead on wrong SW version flashing at Android 9 line.
We checking that issue and collecting samples. According users test and reports solution will follow.
[3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
[4] Sw will try always, in any case retrieve all device-side keys/security during flashing and identify, if they exists inside.
Much backups better, that nothing. Actual for devices with paired/signed security and/or active keybox.
[5] NAND devices on SC9820,SC7715,SC8830 not supported yet for FW reading

Read more here

2019-08-25 Infinity Online Service (IOS) updated

`Xiaomi Mi Account remove` service available for units that can not be connected to PC to read imei. See more in IOS product description and order form.

2019-08-19 Infinity Online Service (IOS) updated

`Meizu Flyme Account remove any model any country` service launched in test mode

Read more here

2019-08-14 Infinity Online Service (IOS) updated

Time limited action - `Xiaomi Mi Account remove` services become cheaper

Read more here

2019-08-10 Infinity Online Service (IOS) updated

Infinity Samsung `SM` software activation is temporary disabled

2019-07-25 Infinity-Box [BEST] NK2 v1.18 - important fix for v1.17

You can download complete v1.18 package as well as v1.18-exe-only if you have v1.17 installed

- Base
Flash engine revised ( N 2/2.1/5/6 flashing fixed )
Format FS / FRP reset revised

Other minor changes and fixed

Read more here

2019-07-25 Infinity-Box [BEST] NK2 v1.17 - All New and Old HMD support activated

HMD N 1 **
TA-1060, TA-1056, TA-1047, TA-1079, TA-1066

HMD N 1 Plus **
TA-1130, TA-1123, TA-1111, TA-1127

HMD N 2 *
TA-1035, A-1029, TA-1023, TA-1011, TA-1007

HMD N 2.1 *
TA-1086, TA-1084, TA-1092, TA-1093, TA-1080

HMD N 2.2 **
TA-1183, TA-1184, TA-1188

HMD N 3 **
TA-1028, TA-1038, TA-1032, TA-1020

HMD N 3.1 **
TA-1074, A-1070, TA-1063, TA-1057, TA-1049

HMD N 3.1 Plus **
TA-1125, TA-1124, TA-1118, TA-1117, TA-1115, TA-1113, TA-1104

HMD N 3.2 *
TA-1154, TA-1156, TA-1159, TA-1161, TA-1164

HMD N 4.2 *
TA-1133, TA-1149, TA-1150, TA-1152, TA-1157

HMD N 5 *
TA-1044, TA-1027, TA-1024, TA-1053

HMD N 5.1 **
TA-1088, TA-1081, TA-1075, TA-1061

HMD N 5.1 Plus **
TA-1120, TA-1112, TA-1108, TA-1105, TA-1102

HMD N 6 *
TA-1033, TA-1039, TA-1025, TA-1021, TA-1000, TA-1003

HMD N 6.1 *
TA-1043, TA-1016, TA-1045, TA-1050, TA-1054, TA-1068, TA-1089

HMD N 6.1 Plus *
TA-1116, TA-1103, TA-1083

HMD N 7 *
TA-1041

HMD N 7.1 *
TA-1100, TA-1096, TA-1095, TA-1085

HMD N 7 Plus *
TA-1062, TA-1062, TA-1055, TA-1046

HMD N 8 *
TA-1012, TA-1004, TA-1052

HMD N 8.1 *
TA-1128, TA-1121, TA-1119

HMD N 8 Sirocco *
TA-1042, TA-1005

HMD N 9 PureView *
TA-1094, TA-1087, TA-1082

HMD N X71 *
TA-1172


For now the next features are supported:
> Firmware flashing ( Factory / BEST firmware packages )
> Format FS / Reset Settings
> Reset FRP
> Identify

Info marks:
* - Device require Remote Authentification Server ( credit cost - 0 for now )
** - Device supported / supported already STANDALONE

- Base
Support for old HMD line over RAS for QCOM models
Support for new HMD line - WT/HQ activated - 2.2, 3.2, 4.2 ( over RAS for QCOM models )
Loader database updated
ModelFinder updated
FileSystem toolkit updated, changed FormatFS for all SP lines
SW/HW/Cross-avoid check activated for BL update mode
Bugfixes and minor changes

- MTK SP
Updated loader database
Boot log now show also ARB state and other service info
Automatic backup for critical partitions activated

- MTK FP
SWVersion check revised
FlashEngine updated
FileSystem (Forensic) engine updated

- SPD FP
Backup / Restore security activated
FlashEngine revised

- Support
Some firmwares for wide range of QCOM/MTK HMD Smartphones can be found on support area

Read more here

2019-07-24 Infinity Online Service (IOS) updated

New product - Xiaomi Mi Account remove (clean, lost) any model Uzbekistan

Read more here

2019-07-03 Infinity Online Service (IOS) updated

- Micro-Box support renew for Infinity activation become much cheaper than before
- 2 years renew available for Micro-Box activation for Infinity

2019-06-06 Infinity Chinese Miracle-2 SPD/UniSoc - CM2SP2 - v2.00 r2 released - More models and features

- Core
Protocol updated
Connection problems with older drivers revisions fixed

- Service
Identify - Read Security info option enabled
> Read and verify NV state, show security info
Identify - Userdata state detection optimized
Format FS - New FMT mode - Forced. Use it if you have problems with default ones. FRP NOT in touch on that mode!

- Flasher
Optimized PAC handling
Some old device types flashing fixed ( SC7715/SC7731 )
NVManager updated - optimized verification, optimized data recovery in case of NVM damaged, complete security info display
Forced NVM update option activated ( complete NV rewrite with all calibration data destroy, if device NVM completely damaged )

- Database:
New generic boots included for SC9850KA, SC9850, SC9832E, SC9820

- Other
Bug fixes and some changes according users requests

Read more here

2019-05-29 Infinity Chinese Miracle-2 SPD/UniSoc - CM2SP2 - v2.00 r1 released

- Supported platforms:
SpreadTrum:
SC5735
SC7715
SC7731C, SC7731G
SC9820
SC9832A
SC9850
SC9853i

UniSoC:
SC9820E
SC7731E
SC9832E
SC9850K
SC9850KH
SC9863

- Support Generic (Non-Secure), SecureV1, SecureV2 devices
Android 4/5/6/7/8 versions

- Supported operations in initial release:
Identify ( include complete device info )
Reset Settings / Format FS
Reset FRP
Firmware flashing ( Safe Flash, Repartition, HW verify, Flash customizing )

- Database:
Basic wide-range bootloaders for common devices types
Also lot of other pre-defined models already included in database

- Extra:
Feature: Completely safe flash engine ( allow flash SimLock / Signed / and other devices, recover critical data from semi-damaged NV )
Feature: Automatic ModelDB update at new model detection ( loader select, pac load etc. )
Feature: Customized boot option and sources: Manual PAC, Manual FDL pair with automatic details detection, Pre-defined DB, Self-Learning DB
Feature: Complete Firmware Info detection at FW load with extended info

Read more here

2019-05-19 Infinity Online Service (IOS) updated

`Infinity-Box/Dongle software activation for Infinity CDMA-Tool` promotional price is discontinued, activation price returned back to it's standard value

2019-05-05 Infinity-Box [BEST] NK2 v1.16 - Android 9 firmwares support, model finder

- MTK flash engine updated ( Feature Line )
- MTK flash engine updated ( SmartPhone Line )

- Android 9P firmwares can not be flashed in Nokia 5.1/3.1/3.1+ , fixed
- Model selector over TA/RM identifier activated. Double click on model to open required tab

- Base
Loader database updated
Bugfixes and minor changes

- Support
New firmwares can be found on support for all supported lines

Read more here

2019-05-01 Infinity Online Service (IOS) updated with code-by-imei services

Unlock code by imei (#1) Router - Beeline etc.
Unlock code by imei (#2) Router - Beeline, Megafon, MTS, Tele2, Altel etc.
Unlock code by imei (#3) Router - Yota, MTS, ZTE etc.
Unlock code by imei (#4) Router - Yota, Alcatel etc.
Unlock code by imei (#5) Beeline, ZTE, MTS, Senseit, Megafon, Irbis, Tele2, Micromax, Fly, Huawei, 4Good, Texet, Prestigio etc.
Unlock code by imei (#6) Beeline, Megafon, MTS, Oysters, Texet etc.
Unlock code by imei (#7) Beeline, Alcatel etc.

Read more here

2019-04-28 Infinity Chinese Miracle-2 MTK/Mediatek v2.06 - AutomaticBoot selection and other stuff

To use this software Smart-Card firmware version should be 0137 or higher.

Base:
Base - Secure boot - Automatic boot selection feature released
Base - Secure boot: Allow automatic detect boot configuration for SECURE enabled chips
Base - Secure boot: Following secure configurations are supported: SBC, SLA, SDA and their combinations
Base - Secure boot: Following secure configurations are NOT supported: ARB and combinations with it
Base - Secure boot: Supported CPU: MT6572, MT6580, MT6582, MT6589, MT6592, MT6735, MT6752, MT6753, MT6755, MT6757, MT6763, MT6771, MT8127, MT8135, MT8167 ( list of tested )

Base - ModelBD - Manual Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use

Base - ModelBD - Automatic Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use ( press and hold LCTRL key during press IDENTIFY )

Base - FlashLoader line v1904 tested and supported. Older lines (6592/6595 and similar) still unstable
Base - FlashLoader line v1912 tested and supported. Older lines (6592/6595 and similar) still unstable

FWFlasher:
FWFlasher - Flash core updated
FWFlasher - SecureFlash on Legacy phones revised
FWFlasher - MT6771/6765 support revised

FWReader:
FWReader - More types supported for safe read
FWReader - Info reading improved
FWReader - packing revised
FWReader - more accurate data verification

Service:
Service - Format FS revised
Service - NVRAM module updated

Platform:
Platform - MT6765/MT6762 support optimized

Loaders:
LoaderDB - Lot of new agents included (Tecno, Tesla, Wiko and other)
LoaderDB - Included MT6570 "DRAM Fixed" agents used to revive devices flashed with wrong preloader ( so called "Doogee X10 bug" )

Other:
Other - Many different small changes and fixes
Other - SaveUser Configuration option can be found in FILE system menu. Work only in MANUAL mode !
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - Preloader tools, Preloader init and other related stuff updated
Other - Partial LEGACY NAND support - optimized boot. Identify work complete if BMT autoset work correct

Info: Automatic Boot option can be switched off/on in settings menu
Info: Automatic Boot work in "SelfLearning" mode - once learned it will boot this type/device line after automatically
Info: Automatic Boot option support and learn different modes ! Make sure if device used DIFFERENT settings - learn all of them !
Info: MT6570 Fixed NAND DA can be used for flashing FACTORY firmware and INIT PRELOADER. For FW read and all other things - use INFINITY ones !

How to use AutomaticBoot select, User DB, Auto DB

Read more here

2019-04-21 Infinity-Box [BEST] NK2 v1.15 - Nokia 1 Plus support

Nokia 1+ (ANTMAN) supported ( TA-1111, TA-1123, TA-1127, TA-1130 )

- Identify
- Reset Settings / Format FS / Reset FRP
- Firmware Flashing

Other
- FlashLoader datbase updated
- Some bugfixes and changes

Read more here

2019-04-15 Infinity-Box [BEST] NK2 v1.14 - Nokia 210 (2019) Full support activated

Next revision of Nokia 210 (2019) are supported:
Nokia 210 (2019) : TA-1139

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )
> Backup security
> Restore security
> Repair security ( via SWP )
> SP unlock ( via SWP )
> Complete repair ( via SWP )
> Forensic ( Gallery/Browser History/Browser BookMarks )

*SWP feature allowed due to Nokia security flaw, made in Nokia 210 and affect this model only for now.
*CROSS-SWP between affected models not allowed for now!

- Base
Loader database updated
Bugfixes and minor changes

- Support
Some firmwares for Nokia 210 can be found on support now

Read more here

2019-04-09 Infinity-Box [BEST] NK2 v1.13 - Universal Flasher/Unbricker, more Forensic and other stuff !

MTK SP tab
- Flasher engine updated
Allow unbrick/repair almost all SW-related issues during flashing from now ( specially A/B devices )
Fixed memory partitioning issues on fresh devices
- Reset Settings/Format FS updated
- Safe UserData flashing feature updated
- Pre-Erase option can be activated/de-activated depend on user need

MTK FP tab
- Dead mode flashing revised ( incorrect identification during flashing semi-dead device )
- Firmware reader engine updated
- LangPack info extractor updated
- Forensic engine updated
Nokia 106 PhoneBook extraction activated/de-activated
Universal Gallery extractor activated
*Allow extract : Photos ( if device have camera ) , Audio records , Browser BookMarks and History ( Built-in MTK and Opera Mini supported )
*Support all existing MTK Feature devices, made by Microsoft and HMD Nokia
*Support Direct (from phone) and Dump (from file) mode
Phonebook extraction updated

SPRD FP tab
- FullFlash reading optimized
Unfortunately, all dumps, made by v112 are not usable. Please, repeat reading with new version, if you need get LangPacks.
- Flash Engine updated
- NVRAM verify and check revised

Other
- Some bugfixes and changes

Support
- All latest firmwares can be found on support!

Read more here

2019-04-01 Infinity-Box [BEST] NK2 v1.12 - Nokia 106 (2019) line support activated

Next revision of Nokia 106 (2019) are supported:
Nokia 106 (2019) : NEMO : TA-1114

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )
> Backup security
> Restore security
> Repair security ( via SWP )
> SP unlock ( via SWP )
> Complete repair ( via SWP )

*SWP feature allowed due to Nokia security flaw, made in Nokia 106 and affect this model only for now.

- Base
Loader database updated
Bugfixes and minor changes

- Support
Some firmwares for Nokia 106 can be found on support now

Read more here

2019-03-31 Infinity Online Service (IOS) updated

Product `Hua HDE Tools Pack activation 1 year` is discontinued
Product `Hua HDE Tools Pack activation 2 years` is discontinued
You can order `DC-Phoenix + HCU timed license 1 year` or `DC-Phoenix + HCU timed license 2 years` or `DC-Unlocker and HCU-Client unlimited`

2019-03-30 Infinity Online Service (IOS) updated

New product - Xiaomi Mi Account remove (clean, lost) any model any country

Read more here

2019-03-24 Infinity-Box [BEST] NK2 v1.11 - More MTK and SPRD features activated

- Nokia SPRD tab
Activated Flash Dump feature
Support another signed base driver ( can be found on support for both x86 and x64 systems )
FlashEngine updated

- Nokia MTK SP tab changes
Flash Engine updated
MT6755 line has been broken in previous release, fixed

- Nokia MTK FP tab changes
PhoneBook extraction engine updated
Flash Engine updated
Backup security feature released, allow store device security
Restore security feature released, allow restore device security backups
Backup now also made during "Identify"
During backup security RPL will be cleaned and prepared ( all counters reset and default mtk settings/options set )

- Other
Minor bugfixes and changes

- Additional info
SPRD flash backups can be sent for processing via IOS FileUploader for adding new LangPacks on support.
ETA of processing - 48 hours, then files can be found on support. All other ways will be ignored.

NEW SPRD DRIVERS should be installed !

Read more here

2019-03-17 Infinity-Box [BEST] NK2 v1.10 - Nokia 3310 3G support and new features

- Nokia SPRD tab activated
Nokia 3G SS [TA-1006] supported
Nokia 3G SS [TA-1022] supported
Nokia 3G DS [TA-1036] supported

- Identify
- Reset Settings / Format FS
- Firmware Flashing ( cross, nvm update, lang change )

Info: Device security paired, store all NV backups to emergency case !
Info: Crossflashing can be done and not touch security ( require enable NV update )

- Nokia SP tab changes
Identify now read BOTH part info for A/B devices
Flash Engine updated
"UserData preserve" mode updated
Format FS / Reset FRP revised

Nokia 5.1+ ( Nokia X5 ) supported ( TA-1102, TA-1105, TA-1108, TA-1109, TA-1112, TA-1120 )
Nokia 3.1+ supported ( TA-1104, TA-1113, TA-1115, TA-1117, TA-1118, TA-1125 )

- Identify
- Reset Settings / Format FS / Reset FRP
- Firmware Flashing

- Nokia FP tab changes
PhoneBook extraction engine updated
Extract "from file" revised
Flash Engine updated

Read more here

2019-03-16 Job offer

You can leave your resume to find a job and/or offer your products and services here

Read more here

2019-03-13 Infinity Online Service updated

New cheaper price for `Xiaomi Mi Account remove (ru, ua) ` service

2019-03-12 Infinity Pinout database v1.65 released

- new pinouts are in database, some information about boot keys and other information included

2019-03-06 Infinity Online Service updated

New product: Hua Box/Dongle reactivation

2019-02-20 Infinity Chinese Miracle II SCR/SPD-RDA v1.04: New models and features

Supported CPU list:
Spreadtrum : SC6530, SC6531, SC6531(A/C/D)
UniSoc : SC6531E, SC6533, SC6533G
RDA Mirco : RDA8851 rev A,B,C,L,CL
RDA Micro : RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL
RDA Micro RDA8826
Spreadtrum SC6533/G :
Flashing protocol updated
BOOTROM mode support revised
Updated LOD tools ( flashing / customizing )
Repair security revised (
-> FAC area rebuild
-> 3rd item repair activated
UserCode reading activated

Spreadtrum SC6530/6531/A/C/D/E:
Revised Repair security feature
Flashing revised
-> Secure/Signed lines flashing rebuild
-> Masterimage build revised
-> Whole flash erase fixed for NOR devices
Internal loaders updated
Database revised, loaders re-marked

Spreadtrum other:
Protocol updated, stuck issues during wrong boot selection fixed
Improved Flashing procedure for SC7701/SC7702 devices
Flashing customization module revised
InternalDB/ExternalLoader detetection/selection revised

Read more here

2019-02-18 Infinity Online Service updated

New service `Xiaomi Mi Account remove (ru, ua) ` launched
Clean and Lost are supported
Service is for models activated in Russia or Ukraine only !

Read more here

2019-02-16 Infinity Chinese Miracle-2 MTK/Mediatek v2.05 - New models and features

Base:
Base - Secure boot - ARB verification revised for some secure configs and chips

FWFlasher:
FWFlasher - Flash core updated
FWFlasher - SecureFlash on Legacy phones revised ( SECCFG options and other issues fixed )
FWFlasher - MT6753/MT6752 flashing revised

FWReader:
FWReader - More accurate type detection on LEGACY lines
FWReader - More types supported for safe read
FWReader - Info reading improved

Service:
Service - "SimLock Reset" option activated - used to rollback all LockSettings to default
Service - Format FS revised
Service - Repair BB revised
Service - NVRAM module updated

Platform:
Platform - MT6771 support optimized
Platform - MT6753 support optimized
Platform - MT8127 support optimized

Loaders:
LoaderDB - Lot of new agents included (Alcatel, Moto, Lava and others)

Other:
Other - Many different small changes and fixes
Other - Some kind of GUI changes for better user expirience
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - EMI Module updated
Other - Preloader tools, Preloader init and other related stuff updated
Other - Scatter handling optimized for some vendor-specific stuff
Other - Automatic backup revised (manual tuneup fix)
Other - Partial LEGACY NAND support (complete boot/verify) - Identify option works now on some devices

Info:
Info: Alcatel support for NEW line devices restricted by PRELOADER level ONLY! Some partitions are PROTECTED! BROM mode not supported for now ( due remote SLA )
Info: LEGACY secure flashing now pass at any base settings but IN SOME RARE CASES (like Huawei and similar) it may lead to BaseBand and other problems.
Solution - REFLASH using CORRECT DA!
Info: ARB nowdays appearing on more devices, make sure about you FLASH SAME version. (Identify ARB LOG and SW load LOG ) Not upgrade to newer ones, if need make some extend service etc. !

Read more here

2019-01-29 Infinity Chinese Miracle-2 MTK/Mediatek v2.04 - New chips support and new features activated

Base:
Base - MT6761 support activated
Base - MT6765 support activated
Base - MT6771 support activated
Base - Secure boot - ARB verification during boot ( via BROM logging )
Base - Secure boot - SLA challenge state verify ( pass-trought file or nonce challenge )

FWFlasher:
FWFlasher - Some ancient secure devices flashing optimized ( early 6572 and similar )
FWFlasher - MT6753/MT6752 flashing revized
FWFlasher - Pre-flash backup option enabled
FWFlasher - Flash core updated

FWReader:
FWReader - More accurate FW verification for signed types ( issues after FOTA "garbaging" )
FWReader - ARB state and version, if present ARB bit
FWReader - AVB state and version, if present AVB secure mechanism
FWReader - FW logging info - if SW show it during load - make sure device contain SAME or LOWER version!
FWReader - More types supported for safe read
FWReader - Info reading improved

Service:
Service - Security repair revised ( NVRAM verify and some "old" types support )
Service - "Repair BaseBand" option activated
Service - Format FS revised
Service - NVRAM module updated

MemoryTool:
MemTool - Improved work with partitions on LEGACY line
MemTool - Wipe operation optimized ( def and adr mode )

Platform:
Platform - MT6761 support activated [ Under test ]
Platform - MT6771 support activated
Platform - MT6765 support activated
Platform - MT6753 support optimized
Platform - MT8172 support optimized
Platform - MT8176 support optimized
Platform - MT8163 support optimized
Platform - MT8127 support optimized

Loaders:
LoaderDB - New agents included ( Moto, Huawei, ZTE, Asus and others )

Other:
Other - Lot of different small changes and fixes
Other - BootHelper updated
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - EMI Module updated - MT6765/MT6771/MT8176/MT8172/MT8173/MT6753 supported
Other - Automatic backup during Identify and critical operations ( list can be tuned via edit settings.ini )
Other - Partial LEGACY NAND support ( complete boot/verify ) for testing purposes for now - MT6580, MT81xx series
Other - All settings ( except FLASH tab and Platform Settings group ) now saved/load automatically

Many thanks to: bRkA, gracy_elec and other our users for providing files and/or testing

Read more here

2019-01-28 CM2SPD Drivers Pack v1.02 released

CM2SPD Drivers Pack v1.02 uploaded to support area

2019-01-25 Infinity Samsung `SM` v2.06 released

Flashing: added support for lz4 partitions flashing
System: AutoReadInfo procedure removed to make connection more stable and faster
Minor bugs fixed

Infinity Samsung `SM` software activation price is 85credits from now due to `SM` v2.06 released

Read more here

2019-01-14 SL3 service status

- SL3 service is back

2019-01-05 Infinity Pinout database v1.64 released

- new pinouts are in database, some information about boot keys and other information included

2018-12-31 Infinity Chinese Miracle-2 MTK/Mediatek v2.03 - MT817x Series support, new features

Base:
Base - DA v1844 support tested on all platforms
Base - MT8172 support activated
Base - MT8173 support activated
Base - MT8176 support activated
Base - Info reading improved ( in some cases device info can be empty )
Base - Startup issues on some machines fixed
Base - Autoupdate feature revised

MemoryTool:
MemTool - Partition types detection improved
MemTool - InitPreloader option revised

Flasher:
Flasher - Activated flashing support for LEGACY signed FW types ( ver3, ver4 )
Flasher - Customization model revised
Flasher - DL Fix / ADL Checksum revised
Flasher - Cheksum issue on 6572/6582 fixed
Flasher - MT6570 NAND support fixed
Flasher - Flashing support for secure FW readout from LEGACY signed devices ( fused )
Flasher - More info, state and other debug stuff during secure types flashing

FWReader:
FWReader - Activated reading for LEGACY secured phones ( for fused devices )
FWReader - Secure state and signature type info during reading
FWReader - Secure workaround for cpu-paired security on fused devices ( FW completey safe for flashing )
FWReader - More types supported for safe read
FWReader - Info reading improved ( in some cases device info can be empty )

Other:
Other - Preloader parsing issues with some new platforms fixed
Other - Lot of small fixes and changes, reported by users
Other - BootHelper updated

Service:
Service - Security repair revised
Service - FixDL option activated
Service - Format FS revised, ENCRYPTION issues, bootloop issues fixed on some platforms/devices

Platform:
Platform - MT8172 support activated
Platform - MT8173 support activated
Platform - MT8176 support activated
Platform - MT2601 support activated
Platform - MT6582 support optimized
Platform - MT6572 support optimized

Loaders:
LoaderDB - New agents included (Teksun, Lenovo, Tecno, CAT, COMIO, Gionee)

Thanks to : kamal_singla, gracy_elec and other our users for providing files and/or testing

Read more here

2018-12-26 Infinity Pinout database v1.63 released

- new pinouts are in database - some information about boot key etc. included

2018-12-05 Infinity Samsung `SM` v2.05 released

Service: added new version of Reset FRP procedure (without user-data lost)
How to use: check "new" checkbox and follow instructions

Infinity Samsung `SM` software activation price is 80 credits from today due to `SM` v2.05 released

Read more here

2018-11-29 Infinity Online Service updated

Huapro (Hua + HDE 2 years) activation for Infinity is discontinued. You can order two activations separately instead:
- Hua Dongle software activation for Infinity
- Hua HDE Tools Pack activation 2 years

Hua Dongle software activation for Asansam Box/Dongle (convert Asansam to Hua) price become higher

Hua Dongle software activation for Infinity become cheaper

Micro-Box software activation for Infinity CDMA-Tool become cheaper

2018-11-22 Infinity Online Service updated

New product available via IOS - GRT-Dongle software activation for Infinity
GRT-Dongle software can be activated for Infinity products:
- Infinity-Box/Dongle
- Infinity [BEST]
- Infinity CDMA-Tool

Read more here

2018-11-21 Infinity Chinese Miracle-2 (Test Version 2014-2015) discontinued

Infinity Chinese Miracle-2 (Test Version 2014-2015) will be removed from products list in nearest time

Read more here

2018-11-20 Infinity-Box [BEST] NK2 v1.09 - FP Forensic and other features

- Forensic engine for MTK feature line devices rebuild from scratch
Allow extract phonebook memory from alive/dead/semi-dead devices
From now allow extract phonebook from memory dump ( made by external prommer or older BEST versions )
> Press and hold SHIFT key before press "Extract PhoneBook" button for enable File mode
Extraction is direct (from device) and from dump
Support unicode

All existing MTK FP models are supported now for PhoneBook extraction:
Nokia 108: RM-944, RM-945, RM-1124
Nokia 220: RM-969, RM-970, RM-971, RM-1125
Nokia 225: RM-1011, RM-1012, RM-1043
Nokia 130: RM-1035, RM-1036, RM-1037, RM-1122
Nokia 215: RM-1110, RM-1111, RM-1112
Nokia 105: RM-1133, RM-1134, RM-1135
Nokia 222: RM-1136, RM-1137
Nokia 230: RM-1172, RM-1173
Nokia 216: RM-1187, RM-1188
Nokia 150: RM-1189, RM-1190
Nokia 3310(2G): TA-1008, TA-1030
Nokia 105(2017) : TA-1010, TA-1034, TA-1037
Nokia 130(2017) : TA-1017, TA-1019

- Changes/Fixes
> MTK FP line
Fix/Change: Flash engine revised
New feature: SW version check during flashing activated. SW will verify data between phone and VPL.
> In case of device dead ( no SW version data available ) - SW will warn about it.
New feature: Complete language info during FlashFile selection ( will show all existing languages without need of manual flashing and verify )

> MTK SP line
Fix/Change : Flash engine revised
Fix/Change : Repartition may fail during NK1 flashing, fixed

Read more here

2018-11-12 Infinity Chinese Miracle-2 MTK/Mediatek v2.02 - new features, loaders, improvements

- Base
Base - Read info from EMI base (preloader) in manual mode after selection
Base - Info reading improved ( in some cases device info can be empty )
Base - Manual mode selection revised ( Boot fail issues in manual mode )

- MemoryTool
MemTool - Partition types detection improved
MemTool - Interface changes ( partition selection style changed, menu sctructure changed )
MemTool - work with boot1/boot2 section revised for LEGACY line
MemTool - InitPreloader option activated ( LEGACY/RAPHAEL )
MemTool - Flash service regions read/write now allowed ( if they not set as protected - i.e. OTP )

- Flasher
Flasher - Removed "Skip preloader" option, use selection instead ( untick preloader from flashing list )
Flasher - Customization model revised
Flasher - DL Fix / ADL Checksum revised
Flasher - Preloader initialization during flashing revised
Flasher - More accurate PMT/GPT rebuild, for compatibility with SPFT ( PMT invalid issues after servicing with MT2 module )

- Firmware Reader
FWReader - Scatter compatibility for spft optimized (6735, 6737)
FWReader - More types supported for safe read
FWReader - Info reading improved ( in some cases device info can be empty )
FWReader - SW path settings also accepted now on FW read

- Platform changes
Platform - MT6589 support optimized
Platform - MT6592 support optimized
Platform - MT673x support optimized

- Loader database
LoaderDB - New agents included ( BQ, TECNO, INFINIX, VIVO )

- Other
Other - Lot of small fixes and changes, reported by users

Thanks to : gracy_elec, kamal_singla and other our users for providing files and/or testing

Read more here

2018-11-06 Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features

Important:
- Software installed to new folder /CM2MT2/ and designed to support new models

Legacy core support activated:
MT6571
MT6572
MT6580
MT6582
MT6589
MT6592
MT6595
MT6597
MT6732
MT6735
MT6737
MT6752
MT6753
MT6795
MT8127
MT8163
MT8321
MT8732
MT8735
MT8752

Identify: full device info, security info
Flash Factory Firmware
Read Factory Firmware
Reset Settings / Format FS
Reset FRP
Repair Security (Flash Mode, Direct)
SP unlock
MemoryTool - complete device control, service, repair, forensic etc.

- Main
Loader database optimized, size reduced.
DA v1820 line support tested and activated
DA v1836 line support tested and activated
Connection level revised
BROM level support optimized
Optimized and changed HighSpeed port selection
FlashEngine revised
NVRAM tool revised
Global option PWM - allow switch SW between two different work modes for RAPHAEL.
> Use second one if first mode give errors at writing f.e. restore NVRAM on F5 like device etc.
> For LEGACY phone it used in MEMORY TOOL ( WRITE / WIPE )

- Service
Repair Security revised
> Old LEGACY types require FORMAT FS/FACTORY RESET for accept changes !
Format FS - new mode activated: Forced Erase
Format FS - fixed WIPE mode

- Core
EMIDB updated
New EMI engine for LEGACY line
> EMI engine support almost all existing LEGACY line
> New types for RAPHAEL included

- FW reader
LEGACY core supported ( unsigned and static signed types are supported )
New types of firmwares supported
Scatter creation optimized

- Other
Settings tab activated ( firmware path settings and other features can be found here )
AutoUpdate ( module files ) feature activated

Many other changes and fixes

Known issues/warnings/info:
1. FileSystem flashing on some SBC-enabled RAPHAEL devices (except SYSTEM/CACHE/USER) may fail ! Solution - exclude them from flashing list.
2. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list !
3. MT6589 supported ONLY up to DAv17xx line, after DAv1728 support has been removed.
4. MT6592 support on DAv18xx loader line broken ( DA issue )
5. EMI/DRAM init module in LEGACY line is almost auto, but in some case require CHANGE EMI setting, if used internal DB ( since much RAMsize/Revision of eMMC/eMCP )
6. MOST of LEGACY phone can be booted via BROM mode from now ( PLAIN, PRL, SBC )
7. NAND support on LEGACY line is not activated yet

Read more here

2018-11-05 Infinity `SM` software v2.04 released

Flasing - add Reset userlock / pin / pattern / password in FRP ON + OEM ON mode options
Many bug fixed

How to use Reset User lock options:
- see phone version in Recovery menu
- download COMBINATION file according to the phone version
- check checkbox and add your COMBINATION file
- flash phone
- after write COMBINATION file wait phone is turned on
- phone on in recovery mode, reboot phone
- you have access to phone data
after backup user data - reflash phone

Read more here

2018-10-31 SL3 service delay

SL3 service server will be at maintenance in nearest several days

Read more here

2018-10-15 Infinity-Box [BEST] NK2 v1.08 - Nokia 105 (2017) support and new features

- Nokia 105 (2017) line support activated !

Next revision of Nokia 105 (2017) are supported:
Nokia 105 (2017) : N103 : TA-1010/TA-1034/TA-1037

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )

- Changes/Fixes
> MTK FP line
Fix/Change: Flash engine revised
New feature: Firmware Read : Activated extarction of device supported LangPacks during FW read
New feature: "LangPack only change" option for FW flashing activated
Fix/Change: Forensic engine updated
Fix/Change: Flash Read revised

- Support
Hundreds of firmwares for 105 (2017) has been upload to support area
> Check out for required region packages or language packages in support area first! Also you can read from any good working device that you have

Read more here

2018-10-09 Infinity `SM` software v2.03 released

Flashing - partitions list updated to support newest models/devices for flashing
Intrface bugs fixed
Included new procedure to support new FRP Reset method (in test, comming soon)

Read more here

2018-10-04 Infinity-Box [BEST] NK2 v1.07 - Nokia 130 (2017) support and new features

- Nokia 130 (2017) line support activated !

Next revision of Nokia 130 (2017) are supported:
Nokia 130 (2017): KESA : TA-1017/TA-1019

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )

- Changes/Fixes
> MTK FP line
Fix/Change: Flash engine revised : Automatic Repair Mode enable, if device semi-dead
Fix/Change: AutoID in case of semi-dead device state may fail, fixed

- Support
Hundreds of firmwares for 130 (2017) have been uploaded to support area
> Check out for required region packages or language packages in support area first! Also you can read from any good working device that you have.

Read more here

2018-10-03 Infinity Online Service updated

- New products: Flash Files Storage - romdevelopers.com `Starters`, `Individual`, `Economy`, `Professional`, `Supreme` plans

2018-10-02 Infinity Online Service updated

- `Samsung unlock code (Exynos)` product is free (zero credits) for users with Infinity `SM` activation v2.xx

Read more here

2018-09-28 Infinity `Shell` v1.51 released

- models database updated
- news download bug fixed
- updates information download bug fixed

2018-09-27 iosFileUploader v1.08 released

- upload process improved
- minor bugs fixed

Read more here

2018-09-26 Infinity-Box [BEST] NK2 v1.06 - FP Forensic and other changes

- Activated Forensic engine for MTK feature line devices
Allow extract phonebook memory from alive/dead/semi-dead devices
Extraction is direct ( from device )
Support unicode

Following models are supported for PhoneBook extraction:
Nokia 108: RM-944, RM-945, RM-1124
Nokia 220: RM-969, RM-970, RM-971, RM-1125
Nokia 225: RM-1011, RM-1012, RM-1043
Nokia 130: RM-1035, RM-1036, RM-1037, RM-1122
Nokia 215: RM-1110, RM-1111, RM-1112
Nokia 105: RM-1133, RM-1134, RM-1135
Nokia 222: RM-1136, RM-1137
Nokia 230: RM-1172, RM-1173
Nokia 216: RM-1187, RM-1188
Nokia 150: RM-1189, RM-1190
Nokia 3310(2G): TA-1008, TA-1030

- Changes/Fixes
> MTK FP line
Fix/Change: Flash reading on some configurations may fail, fixed
New feature: Activated speed selection setting (see software settings tab) Default value - Normal. Speed TOO MUCH depend on this configuration value !
Fix/Change: Flash engine revised
New feature: Activated complete FlashPackage verification during FWSelect and Flashing

> MTK SP line
Fix/Change: Flash engine revised

Read more here

2018-09-22 Infinity Online Service updated

New product: Avator-Pro software activation for Infinity (with Avator-Dongle activated)
NOTE: this activation available only for Infinity users who already has Avator-Dongle activation !

2018-09-20 Infinity-Box [BEST] NK2 v1.05 - Nokia 3310(2G), Nokia 5.1 and other models support activated

Nokia 3310(2G), Nokia 5.1 and other models support activated !

- Nokia MTK Feature line support activated
- Nokia 3310(2G) line support activated !

Next revision of 3310 (2G) are supported:
Nokia 3310 : RETRO : TA-1008/TA-1030

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )

Other models support enabled ( supported in BEST v1.xx line ) :
Nokia 108: RM-944, RM-945, RM-1124
Nokia 220: RM-969, RM-970, RM-971, RM-1125
Nokia 225: RM-1011, RM-1012, RM-1043
Nokia 130: RM-1035, RM-1036, RM-1037, RM-1122
Nokia 215: RM-1110, RM-1111, RM-1112
Nokia 105: RM-1133, RM-1134, RM-1135
Nokia 222: RM-1136, RM-1137
Nokia 230: RM-1172, RM-1173
Nokia 216: RM-1187, RM-1188
Nokia 150: RM-1189, RM-1190

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )

Changes from v1.xx line:
Complete protocol rebuild - faster, safer, more stable
FW read/make now direct, do not need additional read/convert operations
FW read now more faster
Devices not stuck in flash mode after some operations

- Nokia 5.1 : CO2 : TA-1061/TA-1075/TA-1076/TA-1081/TA-1088
> Flashing ( Factory/BEST NB0 files )
> Reset Settings / FileSystem
> Reset FRP
> Identify
> Repair Security
> SP Unlock
Support is standalone, no server and/or credits required !

- Changes/Fixes
> MTK SP line
Nokia 1: FRT : FRONTIER : TA-1047/TA-1060/TA-1056/TA-1079/TA-1066
Fixed BROM mode support
Fixed dead mode flashing
Fixed SP unlock

Nokia 3.1: ES2 : ESSENTIAL2 : TA-1049/TA-1057/TA-1063/TA-1070/TA-1074
Improved flashing in MTK mode
Fixed issues with FOTA after flashing

> QLM SP line
Removed legacy servicing methods
Flashing engine updated

- Other
Settings Tab activated
> Setup FeaturePhones DataPackage path
> Setup SmartPhones DataPackage path
> Setup IOS user credentials ( for use server-based operations )
Lot of fixes and global changes at all

- Support
Hundreds of firmwares for Nokia 3310 (2G) are in support area
> Check out for need region packages or language packages on support area first! Or read from any well working device which you have.
Nokia 230: RM-1172, RM-1173 - HMD and MS LEGACY different firmwares are in support area
Nokia 216: RM-1187, RM-1188 - HMD and MS LEGACY different firmwares are in support area
Nokia 150: RM-1189, RM-1190 - HMD and MS LEGACY different firmwares are in support area

Read more here

2018-09-05 Infinity `SM` software v2.02 released

Service changes:
- Downgrade modem procedure released. This operation may be dangerus so use at own risk and only if you are really know you need it !
- rebuild Reset FRP procedure
Internal changse:
- a lot of changes related to use server functions
- bug fixes and internal improvements

Read more here

2018-09-05 Infinity Online Service (IOS) updated

New products available:
- DC-Phoenix + HCU timed license 3 days
- DC-Phoenix + HCU timed license 30 days
- DC-Phoenix + HCU timed license 1 year
- DC-Phoenix + HCU timed license 2 years

Special packs of dc-unlocker credits:
- DC-Unlocker and HCU-Client 39 Credits
- DC-Unlocker and HCU-Client 69 Credits
- DC-Unlocker and HCU-Client 79 Credits

2018-09-05 HCU-Client activation for DC-Unlocker, Infinity-Box/Dongle, Infinity-[BEST], Infinity-CDMA

HCU-Client software v1.0.0.0287

New feature: HCU activation for DC-Unlocker, Infinity-Box/Dongle, Infinity-[BEST], Infinity-CDMA
Future plan: DC-unlocker plans to remove support for new Huawei phones (already added phones will remain supported) and transfer it to HCU only, while DC-unlocker client will keep receiving updates for modems and routers.

Activate HCU for any supported dongle with limited time offer time for very special price and special conditions:
Activating HCU will include DC-phoenix activation and UNLIMITED SUPPORT - won't be necessary to pay annual support for dongle.
HCU can be activated on Vygis or infinity dongle without dc unlocker activation.

- Users who have DC-unlocker activation with active support and DC-phoenix get 60% discount, price 39 dc-unlocker/hcu credits
- Users who have DC-unlocker activation with active support get 30% discount, price 69 dc-unlocker/hcu credits
- For new dongle users 20% discount, price 79 dc-unlocker/hcu credits

With dongle there will be no PC lock like with timed license user account !

In a short time price for all users will be 99 dc-unlocker/hcu credits.

How to activate

NOTE: If you can not send dc-unlocker credits to you dc-unlocker DongleID via your own site or via other seller you should use IOS (Infinity Online Service) and activation and/or credits transfer will be completed well !

Read more here

2018-08-20 Infinity Online Service (IOS) updated

Prices for DC-Unlocker activations reduced

2018-08-13 Support area content updated

Support area updated with new firmware and NVM files

2018-08-12 Support area content updated

Support area updated with many NVM files for different models

2018-08-09 Infinity `Shell` v1.50 released

- user interface changes
- models database updated
- auto-update of models database
- minor improvements

Read more here

2018-07-30 Infinity `Shell` v1.49 released

- user interface changes
- updates/news check updated
- models database updated

Read more here

2018-07-22 Infinity Pinout database v1.62 released

- new pinouts are in database
- some information about boot key etc. included

Read more here

2018-07-20 Support area for Infinity `SM` software activation

Separate support area opened for Infinity `SM` activation users. Login to suport area the same way as to other support areas via IOS `Support & Downloads`

2018-07-15 Infinity-Box BEST NK2 v1.04 - Nokia MTK standalone support activated

ATTENTION: To run this software you should copy licence file license_xxxxxxxx.dat from /BEST/ folder to /BEST2/ folder

Nokia MTK standalone support activated !

- Main
MTK SP line support activated !
For now the next features are supported:

Nokia 1: FRT : FRONTIER : TA-1047/TA-1060/TA-1056/TA-1079/TA-1066
Flashing ( Factory/BEST NB0 files )
Dead Boot repair
Reset Settings / FileSystem
Reset FRP
Identify
Repair Security
SP Unlock

Nokia 3: NE1 : ESSENTIAL1 : TA-1020/TA-1028/TA-1032/TA-1038
Flashing ( Factory/BEST NB0 files )
Reset Settings / FileSystem
Reset FRP
Identify
Repair Security
SP Unlock

Nokia 3.1: ES2 : ESSENTIAL2 : TA-1049/TA-1057/TA-1063/TA-1070/TA-1074/
Flashing ( Factory/BEST NB0 files )
Dead Boot repair
Reset Settings / FileSystem
Reset FRP
Identify
Repair Security
SP Unlock

- Other
Flashing core revised

Info:
- MTK devices support is free and standalone
- Firmwares can be found on support area
- Firmware files need only for flashing, rest operations not require them
- Make sure you select correct files for your device! ( Nokia 3 specific for now )

Read more here

2018-07-11 Infinity `SM` software v2.01 released

- Service - add `Read Log` option for unlock Exynos phones via server
- some bug fixed

Read more here

2018-06-30 Infinity `SM` software v2.00 released

Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
`SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.

Infinity `SM` software v2.00 news:
- many internal stability improvements
- FRP unlock engine re-written
- FRP unlock procedure updated
- security area write for MTK based devices
- security area write for Exynos based devices
- Smart-Card firmware should be updated to use this software release
- "SM ResourcePack" should be installed to get all released functions working

At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.

Read more here

2018-06-25 Infinity Samsung Activation server maintenance

Today in a short time samsung software activation server will be suspended for a maintenance.
Users who made SM activation today should update their cards today during nearest 3 hours otherwise incomplete actvations will be deactivated.

2018-06-23 QualcommNVDataReader v0.15 released

Whats new :
Fixed read codes for j327p, j250f, j510fn
improved algo to read all codes ( missed SPCK)
New server version filtering bad read data into log files

Read more here

2018-06-19 New products available via IOS

- EFT Dongle 1 Year Support Activation
- Miracle Key Huawei Pack (1+3) for 1 year
- Miracle Key FRP Tool Pack (1+3) for 1 year

2018-06-11 Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826
Flashing protocol updated
Updated LOD tools ( flashing / customizing )

Spreadtrum SC6533/G:
Protocol updated
Support for REV2 bootrom mode activated
FW reading revised
Updated LOD tools ( flashing / customizing )

Spreadtrum SC6530/6531/A/C/E:
Revised Repair security feature
Flashing revised
-> Activated "Format FFS" during BINARY dump writing
-> Use that feature, if device not allow make direct format ( some C/E revision devices )
User code read revised - activated 2nd mode : from DUMP
-> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code.
Activated AUTO fixer for memory dumps
Internal loaders updated

Spreadtrum other:
Protocol updated
PAC handling revised
Improved Flashing procedure for SC7701/SC7702 devices
Improved Flashing procedure for SC6825/SC8825 devices

Known issues[*]/warnings[!]/info[I]:
1. [I] AUTO fixer for memory dumps
-> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout )
-> Just select binary dump in flashing tab or any other operation, which require file select.
2. [*] In some cases Format FFS may fail on E and C rev
-> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS.

Read more here

2018-06-06 Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features !

Important:
- Software installed to new folder /CM2MT2/ and designed to support new models
- Smart-Card firmware v0136 is Ok to use this version
- DO NOT uninstall previous version 1.58 ! If you are trying to connect phone with new software and see a message like LEGACY MTK you should use version 1.58 for this device !

- Main
Connection level revised
BROM level support optimized

MT6771 CPU supported!
MT6771 moved from TEST to GENERAL support.
Firmwware read
Firmware write
NVRAM read
NVRAM write
Reset Settings / Format FS
Reset FRP
Reset Privacy
MemoryTool

- Service
Repair Security revised. Fixed issues with some NV types.

- Core
EMIDB updated
Hint/Error explain module updated
MT6758 support under test
MT6765 support under test

- FW reader
MT6771 supported
New types of firmwares supported
Scatter creation optimized

- SP Unlock
Revised unlock support for some models
Info: MT6739/MT6763/MT6771 IS NOT supported YET!

- New models included
Limited Oppo support (F7/A3)
Limited Vivo support
And diffirent other models
Some other basic "generic" secure devices support optimized

Known issues/warnings/info:
1. [NAND on MT6570] v1712, v1736 loader packages SHOULD NOT BE USED due to these packages have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal behaviour and can not be fixed.
Read-Write data, which you want, ignore "EMPTY" states.
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
5. FileSystem flashing on some SBC-enabled devices (except SYSTEM/CACHE/USER) may fail ! Solution - exclude them from flashing list.
6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases !
7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
8. [NAND on MT6570] In some cases device MAY BE DEAD after flashing! Make sure you have TESTED firmware version!
If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE !
Preloader info shown now during FW load.

Credits :
kamal_singla - testing and useful files contribution

Read more here

2018-05-31 Samsung Qualcomm unlock service started

Samsung Qualcomm unlock service started with a lot of supported models and easy to use logger !
IMPORTANT: T-Mobile USA is not supported which require APP unlock !

Read more here

2018-05-23 Chinese Miracle-2 MTK/Mediatek v2.00 r3 - More secured devices and features !

Important information:

- You DO NOT need to update Smart-Card to use this version. Smart-Card firmware v0136 is enough to use this version
- DO NOT uninstall previous version 1.58, in some cases you still need it
- Software installed to new folder /CM2MT2/ and designed to support new models
- If you are trying to connect phone with new software and see a message like LEGACY MTK - please use version 1.58 for this device !

- Main
DownloadAgent version 1816 supported and tested on all supported SoC.
Fixed some memory leaks
Connection level revised

- MemoryTool
Fixed multi-selection
GPT init revised
Preloader init revised

- Service
Repair Security revised. Fixed issues with some Meizu and other models.

- Core
Optimized different agents versions support ( DA16xx line )
EMIDB updated
Hint/Error explain module updated
Activated SymLinks - allow reduce boot base size by redirecting diffirent brand/models if they have same base
BootHelper ( stage 1 of 3 ) activated - hints/explanation of boot sequnce and correct file selection
MT6758 support under test
MT6771 support under test
MT6765 support under test

- Flasher
Show Preloader HW compatibility when load firmware in flash tab
Fixed file selection order - if SW package contain mixed types - secure will be selected by default

- FW reader
New types of firmwares supported
Scatter creation optimized for some SoC

- New models included
Limited Alcatel support
Limited Gionee support
Limited Wiko support
Limited Tecno support
And diffirent other models
Some other basic "generic" secure devices support optimized
NAND devices on MT6570 moved to separate mode ( under base ) - FACTORY for ONLY FACTORY-provided FW flashing, INFINITY - for all rest operations

Known issues/warnings/info :
1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-Write data, which you want, ignore "EMPTY" states.
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version!
If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!!
Preloader info shown now during FW load.

Credits :
gracy_elec - different useful files contribution
kamal_singla - testing and useful files contribution
merujeffrey - useful files contribution and report logs

Read more here

2018-05-03 Infinity Telegram channel reached 888 members

You can join !

2018-05-02 Infinity Telegram channel reached 777 members

You can join !

2018-05-01 Offer for programmers even with beginner level - addon for CM2MTK v1.58

If you want to release your own software for public use please see details below.

Read more here

2018-04-28 Chinese Miracle-2 MTK/Mediatek v2.00 r2 - MT6739 support, SPUnlock and more

Important information:

- You DO NOT need to update Smart-Card to use this version. Smart-Card firmware v0136 is enough to use this version
- DO NOT uninstall previous version 1.58, in some cases you still need it
- Software installed to new folder /CM2MT2/ and designed to support new models
- If you are trying to connect phone with new software and see a message like LEGACY MTK - please use version 1.58 for this device !

- Main
MT6739 CPU supported!
MT6739 moved from TEST to GENERAL support.
Firmwware read
Firmware write
NVRAM read
NVRAM write
Reset Settings / Format FS
Reset FRP
Reset Privacy
MemoryTool

- MemoryTool
Fixed PMT init on some devices
Optimized Expand/Collapse view functions
Fixed DA1804 and DA1712 loaders support for WIPE
Optimized NAND support

- Service
NVRAM module updated
.dynamic page detection
.some types support fixed
.repair security ( security type detection ) updated
FormatFS / Reset settings rebuild
.Activated fully automatic "FULL FACTORY" mode, designed for all modern devices ( include devices with SEC_CONTROL )
."FULL FACTORY" mode set to default
.Some "OLD" agents (DA15xx) may not work

- SP Unlock activated
Support all MTK modern phones, except MT6763 and MT6739.
Read codes and Direct Unlock mode supported
MT6570 eMMC ONLY devices supported

- Core
Fixed memory leak issues and problems with booting on some systems
Optimized different OLD agents support for MODERN devices ( DA16xx and DA17xx line )
SW more faster now
EMI handler for MT6570 and MT6797 fully automated and complete
Improved EMI lookup support for MT675x devices
EMIDB updated
Hint/Error explain module updated
MT6758 support under test
MT6771 support under test

- Flasher
Fixed break issue, when just one file selected for flashing.
HWInfo compatibility status shown in log in both cases ( succes or failed )

- FW reader
MT6739 support
New types of firmwares supported
Optimized NAND reading on DA18xx line loaders
Read Firmware size now shown in log

- New models included
Limited MEIZU support
Limited Oppo support
Limited Gionee support
Limited BQ support
Some basic "generic" secure devices support optimized


Known issues/warnings/info :
1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-Write data, which you want, ignore "EMPTY" states.
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!

Read more here

2018-04-19 Chinese Miracle-2 MTK/Mediatek v2.00 - new CPU support, new features, new options

MTK 6570 CPU support:
with NAND memory
with eMMC memory
Read Info - Complete device info, Security info
Read Firmware - Factory Scatter format [ NAND supported - WorldFirst and unique! ]
Write Firmware - Factory Scatter Format [ NAND supported - WorldFirst and unique! ]
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6750 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6755 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6757 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6763 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6797 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

--- Under Test ---

MTK 6758 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

MTK 6739 CPU support:
with NAND memory
with eMMC memory
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool

Main
- New look and design. All simplified and optimized much, as possible. [ please refer to v2 interface introduction ]
- New core. All code made from scratch.
- New boot chain selection mode - automatic ( via defined user combination ) or manual.
- New connection
- Complete error handling and explanation
- Internal EMIDB cover 99% of existing memory devices on both - NAND and eMMC devices
- Easy end user customization for adding support for new device etc.

Flasher
- Completely new flasher design, which allow customize whole flashing process [ please refer to v2 interface introduction ]

FW Reader
- Completely new core, which allow handle all existing types and flash devices.

Service
- Security repair NOT require reboot to meta, not required CDC drivers or whatever else. All direct.
- Format FS include different mode, optimized for different secure devices type ( with FORMAT, WRITE protection )
- During NVRAM read/write SW also verify it condition and data


MEMORY TOOL activated!
Easy, fast and ultimate solution now come in MTK too!
- Support eMMC and NAND flash IC secure
- Allow READ, WRITE, ERASE partitions
- Show partitions states and info only for eMMC devices
- Allow RE-init PMT ( from scatter )


Other
Lot of other changes from v1 line, which not mandatory to mention

Known issues/warnings/info:
1. [NAND on MT6570] v1712, v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
1. [NAND on MT6570] UBI SPARSE image flashing may take MUCH time (up to 5 minutes and more) for some devices!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-write data, which you want, ignore "EMPTY" states.
4. [MEMORY TOOL] Old protocol secure devices (MT6750/MT6755) - LeEco and similar
In some cases WIPE partition may not work!
5. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND/eMMC devices! Result - stuck after system/userdata partition flashing
6. FileSyhstems flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
7. Device with NV_TYPE2 security may not work yet for repair sec!

Note:
- You DO NOT need to update Smart-Card to use this version. Smart-Card firmware v0136 is enough to use this version
- Software installed to new folder /CM2MT2/ and designed to support new models
- DO NOT uninstall previous version 1.58, in some cases you still need it
- If you are trying to connect phone with new software and see a message like LEGACY MTK - please use version 1.58 for this device !
- Some unpredictable bugs have been found with some PC and OS configurations, it may lead to "Access violation..." errors. Problem is known and fix is on the way.

Read more here

2018-04-11 Infinity Online Service (IOS) updated

Samsung Exynos unlock code price reduced

2018-04-06 `SM` software Activation

There is a chance that free `SM` software Activation will be removed in some time. If you want to try free `SM` Activation do not make a delay and activate it now.

Read more here

2018-04-05 qUnlock tool has been updated

Support for new models:
- H82xx_Xperia_XZ2
- H83xx_Xperia_XZ2

2018-04-04 Infinity Online Service (IOS) updated

New product available - HDE 2 years activation

2018-04-02 Infinity Online Service (IOS) updated

New product available - Huapro (Hua + HDE 2 years) activation for Infinity

2018-02-22 Infinity-Box BEST NK2 v1.03

ATTENTION: To use this software you should copy licence file license_xxxxxxxx.dat from /BEST/ folder to /BEST2/ folder

- Nokia 8 line changes
New restore database for latest firmwares ( up to 439x version )
Revised flashing core
Activated ability to mirror FW version to both partition and select one of them to boot
During Identify now shown A/B SW version info
Other repair features, specified for NK8 Line only, activated

- Other
Fixed flashing issues for devices with different FlashIC sizes
Flashing core revised
More info shown during identify ( EDL/FB )
Change FW naming during reading to SW version info ( factory-like format )
Encryption state during identify revert back, since some models have NON-encrypted FileSystem
Repair Security updated

Info:
- Use Nokia Care Emergency drivers ( same as for Lumia/NXP )
- Latest available firmwares with OLD sec upload to support ( Nokia 2, Nokia 8, Nokia 5 )
- Nokia Android 8 (Oreo) changes :
> From January/February security patches EDL cables NOT work anymore on Nokia 5 and Nokia 6 !
> Security workaround, used before For Nokia 2 and Nokia 8 NOT work with new BootLoader versions!
> When new workaround will be finished, there is left for now just TP ( with device disassembly ) or rare OTA bugs to force EDL/Downgrade bootchain

Read more here

2018-02-16 Infinity `SM` software v1.11 released

Service - added Read CRT function for MTK based phones (need Root)
Service - added Bacup SEC function for MTK based phones (need Root)

Installer has two parts:
- InfinityBox_install_SM_v1.11
- InfinityBox_update_SM_ResourcePack_v1.09 (old one). If you have Resource Pack installed earlier you do not need to download and install it again

list of models and functions

Read more here

2018-02-07 Infinity `SM` software v1.10 released

Service - added Restore EFS via ADB (All model. Need Root)
UserData - added read Calendar (Need TWRP)

Installer has two parts:
- InfinityBox_install_SM_v1.10
- InfinityBox_update_SM_ResourcePack_v1.09 (old one). If you have Resource Pack installed earlier you do not need to download and install it again

Read more here

2017-12-28 Infinity `SM` software v1.09 released

Service: adeded function Read Codes from spreadrum based phones. Androd version 5.x.x.x and lower
UserData: adeded function extract contacts to vcf via server (need internet connections) for brocken phones (work on any Android-based phones with TWRP recovery)

Installer has two parts:
- InfinityBox_install_SM_v1.09
- InfinityBox_update_SM_ResourcePack_v1.09
both parts should be installed to make new functions working !

Read more here

2017-12-27 Infinity-Box Chinese Miracle II SCR v1.02: New models and features

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

Spreadtrum SC6533/G:
Protocol updated
Revised Repair security feature (fix 000.....00 problem correctly)
- In case of problems - user MUST update FACTORY area!
FW reading revised
Identify now work faster
Identify now show much info, as possible on most models
Updated LOD tools ( flashing / customizing )

Spreadtrum SC6530/6531/A/C/E:
Revised Repair security feature
- Allow repair 3rd security field
Format FileSystem feature updated
User code read revised
Internal loaders updated

Spreadtrum other:
Protocol updated
PAC handling revised
Improved Flashing procedure for SIGNED devices
Customization for some 77xx line fixed

Read more here

2017-12-20 iosFileUploader v1.07 released

- upload process improved
- libraries updated
- .tar and .gz files upload allowed
- minor bugs fixed

Read more here
(c) Infinity-Box 2005-2022Facebook PageFacebook GroupTwitterTelegram ChannelTelegram GroupTelegram GroupTelegram GroupEspañolPortuguêsFrançaisالعربيةTürkçeDeutschРусскийYouTubeJobChat HistoryTerms of ServicePrivacy PolicyEULA