Infinity CM2, Infinity [BEST] @InfinityBoxTalks 26-Apr-2024 [page 33]

[page-1] [page-2] [page-3] [page-4] [page-5] [page-6] [page-7] [page-8] [page-9] [page-10] [page-11] [page-12] [page-13] [page-14] [page-15] [page-16] [page-17] [page-18] [page-19] [page-20] [page-21] [page-22] [page-23] [page-24] [page-25] [page-26] [page-27] [page-28] [page-29] [page-30] [page-31] [page-32] [page-33] [page-34] [page-35] [page-36] [page-37] [page-38] [page-39] [page-40] [page-41] [page-42] [page-43] [page-44] [page-45] [page-46] [page-47] [page-48] [page-49] [page-50] [page-51] [page-52] [page-53] [page-54]

InfinityBoxTalks 2022-08-08

[13:07:27] If failed install boot pack drivers
[13:07:03] Try to change usb cable
[13:06:05] Infinix hot 12i X665B
[12:12:09] Connect to tool holding volume up
[12:05:21] STYLO DDJ18 DA FILE anybody help
[12:04:59] Yes thanks for Help
[12:04:31] you got an answer from supporter at forum
[11:47:34] google helpsabout that for sure.

But in any case please check this - How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[11:16:55] In my PC lots of tools install I don\'t know what tools it\'s detected.
Ok I will change my cm2 to new clean PC.
[11:15:35] What are the sharing tools?
[11:08:45] Waiting for your story about your crack attempt https://forum.infinity-box.com/viewtopic.php?t=6705
[11:07:18] post sw log text https://infinity-box.com/?r=100199
[11:06:08] I did the same process after all the process I updated the firmware in card manager. Everything is done. After that I try to open cm2 mt2 only show logo not open properly.
Then I try to scan fault.bin it\'s found. it\'s auto post at forum.
Now it\'s again said misconfigiration.
[11:00:38] itel p681l stuck here when trying to flash any solution
[11:00:29] Yes .
[10:56:25] How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[10:55:58] Ok
[10:55:33] uninstall sharing tools
[10:54:51] https://forum.infinity-box.com/viewforum.php?f=18
[10:54:31] this box
[10:54:26] see line number 4 from the top
[10:54:23] I even tried to reinstall them but still the same
[10:54:05] https://forum.infinity-box.com/
[10:53:52] Okay


What it does is that it doesn\'t open mt2 and spd2


But mtk and spd works fine
[10:53:43] this field blank
[10:53:39] i want to resgister on the infinity forum
[10:53:18] What?
[10:53:05] Admins do not check videos but only text
[10:52:33] Is it for me that message
[10:52:19] Means
[10:51:32] Hi
[10:51:29] Mereko?
[10:50:22] Yahaan Pa Kiya Type Karna Hai Bro
[10:49:44] There is it
[10:49:22] I send a video it\'s still loading
[10:49:05] Do you see any error message text?
[10:48:02] My cm2 does this
Cm2 spd2 and mt2


Byt spd and mtk works all fine
[10:13:46] first time
[10:13:00] This method is free or charges?
[10:11:47] Found 1 file QMobile i7i
1. QMobile_SP7731E_QMobile_i7i2020_8.1.0_OPM2.171019.012_i7i_2020

[10:04:09] ok thanks
[10:00:01] try different loaders or firmware files.

if nothin helps read https://infinity-box.com/?r=100196
[09:59:12] yes
[09:58:37] use free repair method after sharing https://infinity-box.com/?r=100194
[09:58:11] phone stuck on bootlogo?
[09:56:27] Sn.C1E2DF01
[09:55:18] Card found: S/N : 82154220 , v0153
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Loading : Invens_H1_MDD_14-07-2021.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : Invens_H1_MDD_14-07-2021
FastCheck : 0x005983272C

Loading files ...

File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : wnvitem.bin
File : wcnnvitem.bin
File : prodnv.img
File : u-boot-spl.bin
File : wmodem.bin
File : wdsp.bin
File : modem_wcn.img
File : boot_logo.bmp
File : fastboo
[09:53:45] Flash file
[09:52:05] Found 6 files Rave
1. Zook_Ideal_Iconic_Brave_H5_H7_H8_C907_81K_SC6531D_HOOAH_12ICON_WELCOME_ENHITETA_BT_FM_GPRS_DUAL_240X320_3232_140904_1649
2. Intex_Brave_LX_V18_INDIAN_AMP_D_SER
3. Intex_Brave_LX_V15_INDIAN_SER
4. Intex_Brave_LX_
[09:47:30] What is the dongle S/N?
[09:47:20] OK,I\'ll try again.
[09:47:06] go to software downloads and click to \\SM\\ folder
[09:46:13] What is \"not ok\" means?
What is the text at phone LCD?
[09:45:34] It may be it\'s vendor-lock inside firmware.
You may try to flash it with another firmware
[09:44:40] identify can not affect to phone functionality
check battery voltage with multimeter
[09:43:14] Yes,I\'ve checked that. And charged for a long time. The charger works fine with other phones.
[09:42:27] This activation is not available at the moment. Maybe later
[09:42:04] Check battery voltage
[09:16:17] Ok, got it.
It may be that digital licence will be available in some time but no promises yet
[09:06:26] Hi ,Can anybody help me with this case. I have a model Nokia TA 1359 C30. I used cm2sp2 to indentify device. Then I powered off the phone and try to click VOL+ , connect the phone to PC. It doesn\'t work. Then I tried VOL-, BOTH VOL. They don\'t work too. After three days, I come back the phone, it can\'t power on.
[09:01:59] I dont se cm2 Samsung tool
[09:01:21] Is cm2 not support Samsung mobile
[08:54:33] IMEI[1] : 355160115434063
ID0 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000
SPLock Info : Not locked!

IMEI[2] : 35516011543407
[08:54:33] PRELOADER : DEVICE :
DEV : MT6739
NME : preloader_k39tv1_bsp_1g.bin
CNT : 0003
EMI : [00] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 0 B ]
EMI : [01] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 1.00 GB ]
EMI : [02] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 1.00 GB ]
PRELOADER saved to : Backup\\PRELOADER\\preloader_k39tv1_bsp_1g.bin

Done!
Elapsed: 00:00:30

Operation : SP Unlock [ v2.34 ]
Mode : FLASH

1. Make sure device
[08:54:33] Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode
[08:54:28] TECNO RC6 VODACOM Tanzania unlock not possible
[08:53:23] https://youtube.com/shorts/D1_Srtupx4s?feature=share
[07:59:10] it shows done but still not ok
[07:58:44] Any help
[07:58:24] hi team this phone is mobicel OREO
Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : k112-user 10 QP1A.190711.020 1650076454 release-keys
Platform Version: MOCORTM_17C_W20.28.1_P2_Debug
Project
[07:48:42] It\'s because of sharing,use dongle manager to update or create a thread on gsmhosting with fault.bin file
[04:52:50] From last 5 days the same error
[04:51:08] Is there is any admin to help me
[04:49:54] Is there is anyone
[04:49:35] Hello
[03:36:08] Thank you
[03:28:47] Found 7 files tecno LB8a
1. Tecno_LB8a_H6113GH_P_210302V200
2. Tecno_LB8a_H6113GH_P_IN_210105V198
3. Tecno_LB8a_H6113GH_P_210831V219
4. Tecno_LB8a_H6113GH_P_IN_210302V200
5. [03:11:05] SP7731CEA_i7i_PRO_6.0_QMobile_i7i_PRO_MP_11_12_QMobile_i7i_PRO need this flash file
[02:06:00] Tecno lb8a flach file
[00:24:20] Thanks dear team ❤️

InfinityBoxTalks 2022-08-07

[21:04:21] He is trying to say that he needs digital cm2 instead of dongle 😃😃😃
[21:00:56] http://m.brightensprinkle.top/95a5dVgEd353fkMCZ1UAAg4zMA4VUUtKalJRBQhGEDwoPxklSi07MB88Qg4fLQVMRTxEKV8QPgVRDzALSwsnDyBHRS4MHCE&p=pejetg1659906031969
[20:24:43] Please explian your idea
[20:05:41] nokia 1.4 not possible with cm2 aleast not at the moment
[19:22:22] Google chip type then you know which module to use or if its not supported
[19:18:17] How can I unlock the pinlock of Nokia 1.4 using cm2 dongle
[19:17:36] Members I request for your help please
[17:53:48] Can cm2 do it
[17:00:17] Nobody now use dongle
[16:59:34] Dear CM2 Dongle Team please now time also provide tools instead of dongle to customers that will be very good and best for your success . Nobody now use don\'t it\'s time start tool customers
[15:27:46] Hello,
Please download here https://infinity-box.com/support/
[15:14:54] Team I\'m looking for Samsung SM-A022F NVRAM file backup from CM2 i want to repair BASBAND?
[15:02:24] So, downgrade not possible?
[15:01:48] No
[15:00:05] Hello team, I have a Samsung A107M BIT6, if I downgrade it to Bit 5, flashing scatter rom device will boot up?
[14:21:32] Hi.im from Sri Lanka.pleas give me download site
[13:12:22] Card found : 0903DDC1 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
[12:55:41] Thanks
[12:55:11] *INFINITY CM2 CRÉDITOS 😌*

*CM2 10 SERVER CRÉDITOS 🔥 270MZN*
*CM2 20 SERVER CRÉDITOS 🔥 550MZN*

NOTA: faz 270 × quantidade (de 10 em 10)😌😌 menos bla Bla.

MPESA/ EMOLA/ P24
846653232 / 866653232
Mozambique ONLY
[12:49:32] post sw log text https://infinity-box.com/?r=100199
[12:49:14] You can buy one here https://infinity-box.com/buy/
[12:28:14] Use google)))
[12:27:53] For how much money
[12:27:10] to start, buy infinity cm2,
[12:26:05] Nokia C20 Phone turning on instead of entering diag mode any solution gyz
[12:25:31] what should i do to get it, send me the link to download
[12:14:39] then why did you come here? this is for owners of cm2.
[12:13:48] No I don\'t have
[12:12:33] iphone not supported
[12:12:09] Do you have CM2 dongle?
[12:09:20] please help me
[11:51:28] Stuk on logo
[11:28:03] Try this, close exe, download driver_mtk from support, turn off antivirus, install driver, then relaunch exe and try
[11:26:05] Ok 👍
[11:25:49] I renew it now
[11:25:08] It was expired
[11:24:28] Type your dongle SN here for physical confirmation of support period expiration
[11:17:51] Sogn In to your account and check everything https://infinity-box.com/service/
[10:45:01] how can i check credits
[10:31:32] try now
[10:22:31] Other features like check balance, track order is running perfectly
[10:21:48] 0046E18AD6
[10:20:20] What is the username?
[10:19:43] I tried to move 5 credits but it\'s saying permission Danied
[10:16:49] used the infinity sp driver module from the download links an installed restart your PC
[09:55:55] i have but still same error
[09:51:05] Driver not supported reinstall and try again
[09:50:43] Hi
[09:34:02] Card found : 1AFFFA99 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v723487 Ok!

Update configuration ...
Load IDBase v723487 Ok!

Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM11)
MODE : PRELOADER PORT
PORT : 11
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init B
[08:53:30] It looks like your dongle support period is expired.

You can use previous software versions unlimited.
If you want to use latest software updates you should renew support.

Contact to any seller https://infinity-box.com/buy/
Send your dongle S/N to seller
Order [CM2] support renew for 1 or 2 years

How to check support date - https://infinity-box.com/doc/?r=17
[08:45:15] Next stupidity gives you ban
[08:42:43] https://GridPayout.com/index.php?ref=60926
[08:21:39] I have but not uploaded yet... What is your phones problem? I think is infinix Note 12 Turbo
[08:02:33] https://www.google.com/search?ie=UTF-8&client=ms-android-google&source=android-browser&q=site%3Asoft4gsm.pk
[07:58:09] Have you tried with CM2MT2.exe?
[07:56:56] What was the problem before format?
[07:56:15] click to /SM/ folder at support server
[07:52:33] Card found : FB4226B1 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

RESULT
[07:51:10] run Infinity CM2SP2.exe and click to unlock.
Result?
[07:36:24] HAW TO UNLOCKNETWORK TA 1385 HELPPLS
[07:04:00] thnnx it worked
[06:53:50] Reset password or e-mail HERE\r
\r
Apply username and password this way
[06:53:50] Card found : 1AFFFA99 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : W5002-F3110
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block vers
[06:45:08] Infinity Samsung module download link please
[06:42:10] Reset password or e-mail HERE\r
\r
Apply username and password this way
[06:42:10] Card found : 1AFFFA99 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...


>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
Boot
[05:47:51] Make this https://infinity-box.com/?r=100155
[05:47:51] my cm2 dongle misconfiguration !!!
[05:46:54] i need help please
[04:26:28] Ok
[04:25:45] Found 2 files ZTE Ba610
1. ZTE_MT6735_ZTE_ZTE_BLADE_A610_6.0_DIS_ASI_BA610V1.0.0_MRA58K_E183L
2. ZTE_MT6735M_ZTE_BLADE_A610C_6.0_DIS_ASI_BA610CV1.0.0_MRA58K_E181L_32B

[04:14:33] Need UK off for mtk
[03:10:22] Zte Ba610 file needed

InfinityBoxTalks 2022-08-06

[22:34:59] Basebande is ok
[22:34:36] I try to put imei but problème not solve
[22:33:49] No signal
[22:33:26] After format flash
[22:16:01] Itel s17 S661w
[22:11:36] Model?
[22:11:25] As in network unlock or what?
[22:10:36] Yes
[22:10:21] Thanks
[22:07:41] Yes solution available
[22:05:10] Uninstall all manually installed drivers then download unisoc and mtk drivers from support then install
[22:01:17] You flash format right?
[21:59:11] Tecno ke5 network solution please
[21:26:46] any error message text?
[21:12:31] anyone with mdm file for itel p661w inbox mi
[20:44:47] need this file please

https://support.hiunlock.com/index.php?a=downloads&b=file&id=1371
[20:36:55] Hi Support Unlock Xiaomi Redmi Note 11 request code ??
[20:17:05] Google pixel 3a frp
[20:16:19] Before same windows working but now not work I try everything
[19:53:42] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[19:53:11] Yes
[19:52:57] https://forum.gsmhosting.com/vbb/f296/nokia-g10-aka-ta-1334-suported-2994645/
[19:52:16] try to select another CPU or model
[19:51:11] you should install SPD SoC drivers https://infinity-box.com/support/
[19:50:31] See line 9. here https://infinity-box.com/price/
Contact to any seller and order this activation for your CM2
[18:11:37] File Samsung a135f
[18:11:05] Try here @FlashFileSearchBot
[18:11:05] Hi team I need file for Samsung a135f
[18:00:21] yes of course
[17:57:45] How to add this tool to cm2 dongle
[17:18:18] Pls house I need help with my Cm2spd2. I just formatted my laptop because of virus but when I click on identify my device the process will just Quickly end because I connect the phone
[16:12:46] African or global unlock
[16:08:20] The real on this Tecno BD2P phone issue is this.The phone was formated
[15:48:45] Operation : Identify [ v2.14 ]BootMode : FLASH1. Power off device, wait 10-15 seconds2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )3. Insert cable in device!Wait for device ... Device Connected!BootVersion : SPRD3Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0SSending Init Boot ... Boot sent!Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1Protocol setup ... Port speed : 921600Sending Flash Boot ... Boot sent!Kick FLASH FDL ... FDL : 0x0008FDL : EMMC_RO : False ; EMMC_PART : Tr
[15:47:25] After identify still requesting identify while trying to read nv
[15:30:53] Card found : 2ED4BB6C , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.12

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.12 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable
[15:23:48] A037F U1 Dead Boot Repair Scatter Firmware Show MTK Port Only Fix Solution File Without JTAG By[www.Kawsarmobile.com]

____====/

Samsung All MTK Cpu Dead Fix Solution Tested Firmware Ready For Upload 🥳😍🥳😍
___-____/

All File Free Download
|_|__|

Just Keep Visiting
___|___

Download Link

https://kawsarmobile.com/2022/08/06/a037f-u1-dead-boot-repair/


ΠΠΠΠΠΠΠΠΠΠΠΠΠ/

Facebook GSM Group 👇

https://www.facebook.com/groups/gsmtestedfileofficial

Telegram GSM Group 👇

https:/
[15:07:00] Is possible to move credits using Infinity API?
[15:06:31] Is possible to move credits using InAPI
[15:02:26] #CM2SP2 connection issue solution is HERE
[15:02:26] Operation : Flash Firmware [ v2.14 ]Setting : Update NVRAM : FalseSetting : Force NVRAM : FalseSetting : Update PMT : True1. Power off device, wait 10-15 seconds2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )3. Insert cable in device!Wait for device ... Device Connected!BootVersion : SPRD3Boot : MANUAL LDRSending Init Boot ... Boot sent!Kick FDL ... >>> ERROR : FDL NOT started!>>> Error : Fail to boot FDL!>>> Unsupported device with selected fdl or settings! Change settings!
[14:55:55] getting this error
[14:53:33] imfinix hit 10i boot please
[14:47:25] Fine l didn\'t knew. Will never happen
[14:32:45] Have you tried with CM2SP2.exe?
[14:31:43] it\'s np to post sw log text
[14:31:15] use free repair method after sharing https://infinity-box.com/?r=100194
[14:30:35] sorry sir it was a mistake
[14:30:22] What is the phone state?
Is it stuck on boot?
[14:29:53] no need any drivers
run exe and use it
[14:29:24] Card found : 578909AF , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Open : SP7731GEA_HDR_sp7731g_1h10_6.0_J106G_Vfone_Sun_B18_V001-20191227_Sun.pac
VER : BP_R1.0.0
LEN : 1.28 GiB
CPU : SC77xx
VER : SC7731_eMMC_HDR_SP7731G_1H10_6.0_INFINITY-BOX

Reading package ...
Read package finished!

Patch Level : MRA58K
Display ID : J106G_Vfone_Sun_B18_V001-20191227
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01

[14:29:23] Next time you will get ban
[14:28:28] post sw log text https://infinity-box.com/?r=100199
[14:28:12] Nothing found for Infinix x670

If you will get the file upload it to support with iosFileUploader

[14:27:21] for any of them
[14:27:00] post sw log text https://infinity-box.com/?r=100199
[14:26:20] Admin can not see images here.
You may send sw log text https://infinity-box.com/?r=100199
If you do not want to send text to Admin you may wait help from other users.
[14:25:58] Not yet. Later
[14:25:41] use free repair method after sharing https://infinity-box.com/?r=100194
[14:25:08] 👆
[14:25:05] double check SPD drivers
also some people reported connection issue with latest models, maybe its newest sec type
[14:24:15] What is the model name?
[14:23:53] Admin can not see images here.
You may send sw log text https://infinity-box.com/?r=100199
If you do not want to send text to Admin you may wait help from other users.
[14:22:31] what was the prob with the phone before your operation?
Where is sw log text?
[14:21:44] everything depends on phone hardware type and dpends on installed firmware version
[14:20:53] Make this https://infinity-box.com/?r=100103
[14:20:23] If you think it wks well with flashtool you may try with flashtool.
[14:19:14] You may try with different base/model/DA selection
[14:18:37] Win 10 64 bit is Ok, it was tested well
[14:18:18] What is the problem?
[14:18:03] Nothing found for sm a135f

If you will get the file upload it to support with iosFileUploader

[13:06:39] Admin what can I do I did everything still filed
[13:06:04] Windows 10 64 bit not work
[12:56:11] OK
[12:55:46] untick auto EMI in Setting
[12:55:46] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34 Load IDBase v723487 Ok! Update configuration ... Socket Error # 11001 Host not found. Load IDBase v723487 Ok! Operation : Identify [ v2.34 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM13) MODE : BOOTROM PORT : 13 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT
[12:43:02] A friend did his through SP Flashtool so wondering why the restrictions on CM2 MT2
[12:24:39] Same software works with SP flash tool but not with CM2 MT2
[12:21:42] Some time later
[12:19:58] Images are disabled for Admins.
To get answer from Admin you may send text.
Another way - wait help from other users.
[12:17:28] https://www.youtube.com/results?search_query=c20+reset
[12:14:57] 👆
[12:14:04] Try with built-in default loaders first.
Post sw log text
[12:13:49] LG-H635
[12:13:39] Try with built-in default loaders first.
Post sw log text!
[12:13:17] Make this https://infinity-box.com/?r=100155
[12:12:48] Model?
[12:12:42] Probably you should flash it with compatible firmware
[12:12:31] How to remove frp on this LG
[12:11:33] Data Explorer need Activation
See here https://forum.gsmhosting.com/vbb/f296/infinity-data-explorer-software-2733086/
[12:11:28] 👆
[12:10:59] Make this https://infinity-box.com/?r=100103
[12:10:06] Do you know what is this phone CPU type?
[12:08:01] Please help. Which plataform l may use to Readers info for this phone
[11:59:41] Plzz help
[11:59:34] Cm2 mt2 letest setup not warking only logo
[11:55:04] You need act7on your dongle before you can use bro
[11:48:34] Need help flashing Infinix X672. Choosing yes damages the phone’s security which isn’t restoring even from backup.
[11:46:22] Nothing found for Infinix x672

If you will get the file upload it to support with iosFileUploader

[11:45:54] Found 8 files x672
1. Forme_SPD66x0_00800000_SC6600L_sp6601l_trisim_BASE_TRISIM_R1.0.2022_SC6600L_sp6601l_Forme_X6720
2. MTK_MT6225_X6720_ABROAD_PCB01_GPRS_MT6225_S00.6720_ABROAD_2CDGB_V1_1_2_NKTEL_A800_16m_En_Ru_El_Fr_Th_Vn_Tr_Hi_Farsi_Pt_Bg_Ar.B0M
3. MTK_MT6225_X6720_ABROAD_PCB01_GPRS_MT6225_S00.672
[11:42:51] Cm2 mt2 letest setup not warking plzz help
[11:34:40] Cm2 mt2 letest setup not warking
[11:28:54] Tecno spark 5 correct da file pls
[11:23:19] Tecno kg7h correct da file plz
[11:22:11] untick auto EMI in Setting
[11:22:11] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34 Load IDBase v723487 Ok! Update configuration ... Socket Error # 11001 Host not found. Load IDBase v723487 Ok! Operation : Identify [ v2.34 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM13) MODE : BOOTROM PORT : 13 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT
[11:20:06] android nokia C20 RESET .PLS HELP
[11:19:26] keypad
[11:18:59] Or Android Nokia
[11:18:33] Keypad?
[11:18:09] sorry nokia c20
[11:17:50] please need help
[11:17:33] i need to reset nokia20
[11:17:13] Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
[10:56:04] c1 2nd edition network lock
[10:41:49] Please help: itel P681L show this while trying to flash It\'s firmware, now the phone can\'t even booth up
[10:37:28] Tecno bd2p show this while trying to load a file
[09:11:24] how to network unlock
[08:58:53] Chipset?
[08:58:30] Admin just asking for help please Members
[08:52:38] Give help please
[08:52:29] Nokia C20 not responding on reset
[08:51:55] 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
[08:02:43] I promise not share my dongle cos it is usage violation here is my S/N 4ED41C91
[07:28:26] Ok
[07:20:15] No brother straight unlock
[07:19:18] Ask for code?
[07:04:24] Good morning all dear brothers......any solution for Nokia c1 second generation network unlock?
[06:45:36] Okay then maybe I will get all the Whole three phone firmware
[06:45:04] For the device to be in proper mode bro, you need to full flash with another firmware
[06:43:23] Okay are you saying that the reason why the stuff is happening is that is not the compatible firmware for it cause I used TL00 it never worked
[06:41:24] Then download compatible firmware, flash with it
[06:40:21] Just do hard reset and it was not booting it will just show no command and off and ok again
[06:37:22] Device present State?
[06:32:32] Please what might be the cause on Huawei Tag-tl100 showing this
[06:18:14] Ok now got you
[06:10:40] bootloader is unlocked but cannot flash due to locked KG
[06:10:20] it has some sort of firmware corruption it goes straight in download mode
[06:09:38] What do you mean by present state bro
[06:09:12] Bro what\'s the present State of device?
[06:06:44] Download mode show locked
[06:06:26] Device present state?
[06:05:24] Bro cm2 server credit is needed for this ope6you want to perform here
[06:04:03] Nothing found for infinix X670

If you will get the file upload it to support with iosFileUploader

[05:48:50] second attempt show fails with KG not set message
[05:48:49] Hey problem with changing KG state on samsung A225F first result came success turned phone in download mode still show locked
[05:48:49] bump
[05:16:53] Untick the emi in setting n repeat the operation
[03:59:27] hi..anyone have oppo A93 CPH2121 Clean RPMB.img can send me ?
[02:28:41] Already I make a backup thanks
[01:14:27] This is uk off for cm2sp2 or for cm2mt2???

InfinityBoxTalks 2022-08-05

[22:57:29] thanks
[22:41:49] Please always remember to untick preloader when flashing these devices!
And to make backup of ROM of your device before temper with them in case of these situations you can revert to it\'s previous state.
[22:36:24] I downloaded phone can\'t boot
[22:36:21] https://firmwarefile.com/infinix-note-12-turbo-x670
[22:34:42] Use search bot
[22:33:14] And you can add a reboot device to recovery ,mata ,fastboot mode button
[22:27:52] Infinity team can you fix or create a safe method of FULL FACTORY (WIPE+ FRP) which is safe from errors like getting stack on FASTBOOT or THE DEVICE SOFTWARE CANT BE TRUSTED....... Etc
I used this function on TECNO KF7j I got stuck on FASTBOOT I had to download new firmware to fix the device?
[22:19:14] Infinix x670 flash file
[22:18:46] Hello guys I need help
[22:17:34] Download UK of file from Internet and paste it in the folder of spd
[21:48:11] How do I enable repair imei section on spd
[21:17:53] How do I enable repair imei section on spd
[20:46:25] Not possible bro only paid service available
[20:45:55] Not with cm2 tools bro
[20:37:32] Create Your Own Account And Have Access To Buy Any Exclusive Latest Files Yourself Using Airtel Money And Tnm Mpamba

www.saroms.co.za/

*Pay Under Malawi Pay*
Airtel money: 0998203324
Tnm Mpamba: 0881752141
🇲🇼
[20:25:11] Any one to help me with the smart card drivers
[20:25:11] Card found : FC1F38DB , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Open : PR652B-F6317-11.0-OP-V036-20210708.pac
VER : BP_R2.0.1
LEN : 4.18 GiB
CPU : s9863a1h10
VER : PR652B-F6317-11.0-OP-V036-20210708_2114

Reading package ...
Read package finished!

Product Brand : Infinix
Product Device : PR652B
Product Model : Infinix PR652B
Product Name : PR652B
Patch Level : RP1A.201005.001
Display ID : PR652B-F6317-11.0-OP-V036-20210708
Ver. Incmt : OP-
[20:24:55] you can try but i mean that you will need contact support
[20:24:28] im not shure
[20:22:49] Will open?
[20:22:38] If I uninstall it, cm2 will back to normal?
[20:19:18] Any one can help me to get Nokia HMD account!!!!!❓❓❓
[20:10:31] yes
[20:03:44] Like USB redirector?
[20:02:42] i mean that you use some sharing soft
[20:02:04] Cm2 dongle
[20:01:59] How to solve this error?
[19:42:30] Samsung a72 imei shows 000000000000 is possible to write imei
[19:35:13] I got cm2 now problem solved
[18:01:17] And I need firmware for Nokia-ta1352
[17:28:18] FAQATGİNA KANALİMİZ OBİNACHİLARİ UCHUN
KANALİMİZGA OBUNA BÖLİSHNİ UNUTMAG

@Gsm_PROF @Javohir9595
[17:26:38] Hello someone can confirm if you can repair imei to a motorola E7 that does not grab signal?
[17:07:54] heloo frind how to hard reset invense k2 spd?
[16:54:12] need flash nokia TA1391
[16:53:55] second attempt show fails with KG not set message
[16:53:19] Hey problem with changing KG state on samsung A225F first result came success turned phone in download mode still show locked
[16:49:24] Thanks
[16:42:41] ALRIGHT
[16:42:28] https://www.verizon.com
[16:41:52] try different base one-by-one
[16:41:32] And country ???
[16:41:06] I WILL GIVE IT A TRY THAT MEANS A LOT OF BASE GUEST WORK RIGHT?
[16:39:42] try to select another base but not only AGENT : 0_base : BASE_v2112
[16:37:32] Verizon
[16:36:45] Where is sw log text?
[16:36:31] no connection at all
you need good cable and drivers
[16:35:55] no connection at all
you need good cable and drivers but not DA
[16:04:04] All the DA\'s Didn\'t work for me so no need of uploading to the TEAM
[16:01:01] Hello!, Good day Team!,
I have a problem with Tecno KC2 FRP UNLOCKING
here\'s a log file please for Diagnosis
Update configuration ...
Load IDBase v723487 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
C
[15:44:49] Its done i got an email
[15:44:40] Thanks sir
[15:44:25] Done i gone email
[15:43:52] please help unlocking nokia ta 1342 in diag
[15:43:24] Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
[15:42:01] use this platform
[15:39:14] how to see country and network lock
[15:38:40] 359230060883196
2022-08-05 14:05:56
iPhone 6 16GB Space Gray A1549 CDMA/Verizon MM;Model Description:IPHONE 6 SPACE GRAY 16GB-CLA;S/N:DNPPDXZNG5MC;MEID:35923006088319;Loaner device:No;Replacement device:No
[15:38:19] Infinix x665b identify failed always got da setup PARAMS failed
[15:38:14] here is what i get
[15:37:57] how to get it correct info
[15:37:26] i just inquery on iphone 6 to see country and network lock but im lost
[15:36:08] hello team
[15:35:15] Write firmware
[15:34:57] what operation do you want to perform?
[15:33:50] faling to unlock nokia ta 1342 in diag
[15:33:28] Please sir i need the correct da file for kg7h
[15:33:12] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
[15:25:56] Tecno kg7h not connecting in da file on cm2mtk2, please help
[15:19:34] https://support.halabtech.com/index.php?a=downloads&b=file&id=638783 somebody help me with this link please
[15:13:10] Owk thanks
[15:01:01] you do not need DA for this model
use built-in loadrrs or install boot-pack to see model in list
[15:00:19] use different base selection and try many of them
[14:59:39] select another base/model/DA
use one of the defaults, do not select exact model
[14:51:07] Nothing found for tecno kc2 da

If you will get the file upload it to support with iosFileUploader

[14:50:45] Found 9 files tecno kc2
1. Tecno_KC2j_H6113BJ_P_201021V271
2. Tecno_KC2j_H6113BJ_P_190826V163
3. Tecno_KC2_H6113AI_P_210705V320
4. Tecno_KC2j_H6113BJ_P_210301V280
5. [14:40:19] I try but the same problem
[14:34:56] Found 9 files tecno kc8
1. Tecno_KC8_H6110LMN_Q_OP_210312V193
2. Tecno_KC8S_H6110N_P_ZAVC_200226V34
3. Tecno_KC8_H6110LMN_P_201207V232
4. Tecno_KC8_H6110LMN_Q_OP_210708V261
5. [14:34:30] \\tecno kc8
[14:28:22] Identify done but still asking me to identify
[14:26:39] the same
[14:26:28] Operation : Write NVM [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Tecno : KG5k
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET
[14:23:39] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Tecno : KG5k
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True
[14:22:06] click to IDENTIFY button first
[14:21:34] Card found : 1AC58215 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Write NVM [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Tecno : KG5k
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Fl
[14:19:13] more advices only against sw log text
[14:18:46] select another base/model/DA
[14:15:59] This error
[14:14:22] I see nothing at your photo
Let\'s wait somebody else who can look at your picture
[14:13:28] give me text my friend, don\'t push me ban you for group rules violation
[14:12:59] When i dentify it does this
[14:12:22] I need to write NV but failed,needs to identify
[14:10:31] broken
[14:09:55] What is the prob?
[14:09:44] https://infinity-box.com/?r=100172
[14:09:36] Nokia Ta1380 hard reset
[14:09:12] Hello
[14:09:08] Heller
[14:08:42] Okay. Let me try
[14:08:36] When i do identify
[14:07:41] Tecno KG5k
[14:07:28] Please check this list https://infinity-box.com/buy/

If you can not find seller near you - Aliexpress has it
[14:06:50] Nothing found for Hisence U40

If you will get the file upload it to support with iosFileUploader

[14:06:39] Nothing found for HLTE103E

If you will get the file upload it to support with iosFileUploader

[14:06:26] select another base/model/ DA
also you may try to change EMI (see right side ow sw window) value manually
[13:56:58] Infinix x665b
[13:44:48] Card found : 4E5D8343 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

Update configuration ...
Load IDBase v723487 Ok!

Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP :
[13:43:45] I am based in Nigeria and do lots of business in China

Pls when do I buy cm2 dongle in Nigeria or China?

The agent I contacted in China does not have stock.
[13:41:48] Hisence U40
HLTE103E.33-H5 flash file
[13:41:05] Hisence u963 HLTE100E.11-LV
FLASH FILE
[13:40:05] Admin operation log
[13:36:43] Same problem sir
[13:35:55] untick auto EMI in Setting
[13:35:55] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 8EA3CDC49106918464A206F7404CCFDB
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL
[13:00:53] I did same problem in 0 base
[12:55:53] uncheck firefly in settings
[12:51:11] 2.34
[12:42:18] What is the CM2MT2.exe version?
[12:41:39] https://infinity-box.com/?r=100172
[12:12:28] Admin solution
[12:09:30] Da Setup emi prams failed
[12:09:18] Infinix x665b Can\'t identify
[12:02:46] What is it?
[12:01:15] https://drive.google.com/file/d/1XF3ay7BMJAHrDc89Cofas7mPltD7kIfq/view?usp=sharing
[12:01:04] in progress
[11:59:58] waiting for the update of the mtk module... please, it\'s been a long time
[11:56:29] 💪🏽
[11:50:52] perfect
[11:44:37] Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]

Operation : SP Unlock [ v1.27 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold \'VolumeUp\' and \'VolumeDown\' keys
-> Alternative : just ONE \'VolumeUp\' or \'VolumeDown\' key
3. Insert cable

==== Wait for phone...

Phone found! [ 41 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot
[11:39:55] You may try also wth CM2CSR and CM2SPD but it may be that this kind of very old CPU is not in list.
You should try
[11:38:38] No
[11:38:22] Operation : SP Unlock [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731GEA_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!


[11:36:38] What is this phone CPU type?
[11:36:12] I do not remember already. It may be this cpu is very old
[11:25:23] not see this boot in tool
[11:23:55] Unlock any solution
[11:18:42] Members me too I need help please🙏
[11:18:14] post flash sw log text
[11:17:42] Passcode
[11:17:11] What was the problem with it before flash?
[11:15:25] Members can it be possible to use dongle to unlock sumsang GT-S7572 network
[11:14:03] Please what is the solution to this problem
[11:13:07] PHONE WAS PATTEN LOCK , SOMEONE TRY WITH OTHER TOOL TO REMOVED LOCK BUT SOFT BRICK PHONE
[11:12:58] Members i need some help
[11:05:56] One more LCD photo may gives you ban.
You must read group rules https://infinity-box.com/?r=100172
[11:04:25] You got your dongle damaged after sharing.

Now use free repair method after sharing https://infinity-box.com/?r=100194
First time it\'s free. Next time it will be paid.
[11:02:30] Nothing found for oppo a93

If you will get the file upload it to support with iosFileUploader

[11:01:59] What was the problem wuth the phone before first operation?
[11:01:12] What full info do you want to get?
[11:00:39] What is the problem?
[11:00:16] https://infinity-box.com/?r=100172
[10:59:38] Click here @FlashFileSearchBot and type there phone name. You will get links
[10:59:30] It\'s mtk
[10:59:21] It\'s rebooting
[10:59:03] Hands vibration?
[10:58:51] for SPD run CM2SP2.exe and click to IDENTIFY button first
After that you will see
[10:58:36] No
[10:58:15] Click here @FlashFileSearchBot and type there phone name. You will get links
[10:58:04] LCD vibration?
[10:56:48] Call to any seller https://infinity-box.com/buy/
And send your dongle S/N to seller.
Renew takes 10-15 min
[10:44:21] Help me nokia TA-1270 and I have flashed it
[10:41:58] read this to avoid future ban for selfie https://infinity-box.com/?r=100172
[10:41:27] select CPU type and software will make AUTO-DETECT for your phone
[10:40:02] You can buy Infinity CM2 from any seller https://infinity-box.com/buy/
[10:16:16] mobicel trendy 2
[10:14:28] device
[10:14:11] like to reset frp
[10:13:35] what operation
[10:13:32] any tool ocotoplus frp tool nck tool prp tfm
but if device its mtk i can not do job exmple

Exe version: NCKDongle AndroidMTK 2.7.7
Selected model: 0-By CPU ELBRUS
[auto]Action: Reset FRP
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep \"VOL-\" button untill inserting USB cable.
For some phones need to keep \"VOL+ and VOL-\" button untill inserting USB cable.
For some phones need to keep \"VOL+\" button untill inserting USB c
[10:10:07] hi guys need help ...i can not do job on any mtk device
[09:22:53] Help how to convert from processor type to device type
[09:21:01] has anybody nokia 2.4 andoird 12 firmware
[09:19:02] Problem solved by updating phone with ota update in recovery mode
[08:57:59] Are you done
[08:47:04] i need to renew my cm2 dongle
[08:10:11] how work on SPD8810/6820 to reset password?? URGENT
[08:08:47] hi
[07:57:08] ????
[07:47:44] Can you please help me the firmware file
[07:34:47] X659 and you\'re using this fdl settings?
[07:21:23] HELP FRP INFINIX X659
[07:15:33] HELP FRP INFINIX X659
[07:15:29] HELP FRP INFINIX X659
[07:12:51] Type: Infinity-Box/Dongle [CM2]
S/N: 4ED41C91
Username: 004ED41C91
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0152; Expired: 03-Dec-2022

[07:08:25] i need to read full info but failed
[07:06:52] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : KG5k-F062-11.0-GL-V040-20220328.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : F
[07:02:56] No have
[07:02:11] Isp
[06:58:15] A135f
[06:58:04] Please which tool can I use for samsung mdm unlock
[06:39:23] ??????
[06:39:04] Oppp A31 fs done by other tool , now phone go to recover mode and system error come , i flash the phone with vm2 but still same problem , i check health also ok , now how to fix this
[06:37:11] Yes here
[06:35:15] Here
[06:33:27] Can l send my s/n
[06:23:38] Need firmware?
[06:23:00] SN?
[06:15:56] On /off on Nokia logo cpu is spd
[06:15:55] Spd
[06:15:55] Help please nokia ta-1342 hard reset and bypass frp Google account
[03:38:00] Please can someone help with oppo a93 firmware please
[01:29:43] file to activate imei module spd
[00:18:10] Pls can l send u my S/n if can help posting it on infinity cm2 forum tried registering but it wasn\'t working out
[00:14:23] also read chat rules https://infinity-box.com/?r=100172
[00:13:56] Make this https://infinity-box.com/?r=100155
[00:11:57] What is the problem with it?
[00:02:05] Help me my cm2 got damaged
Can u help in fixing it
[00:00:57] Help

InfinityBoxTalks 2022-08-04

[22:08:00] Sim2
[22:07:38] Defult Nvram Repair
[22:07:09] Resistance remove
[22:05:09] Redmi 9a nvdata is corrupted error
[22:05:08] Redmi 10 nv data is corrupted
[21:03:54] Also please check manuals and files here before start work https://infinity-box.com/support/
[21:03:22] Ok, I can repeat:
it\' very important my friend
you must always copy/paste sw log text
sw log text has all information about your failure
[21:02:37] Inbox and any kind of personal support is little bit expensive, I don\'t think you want to pay 40 usd per 15 minutes of remote support.
So please start with youtube videos here https://www.youtube.com/infinitybox/playlists
[21:02:11] How important is sw log text
[21:01:13] Inbox is little bit forbidden here, you may get ban.\r
If you know how to fix write here for everybody.
[21:01:13] Inbox?
[21:01:04] And I kindly request u man please to text me in my inbox🙏
[21:01:03] Ok, I got your point, wait
[21:00:42] I mean that you MUST attach software operation log text in addition to any your question otherwise we do not know how to help you.
[21:00:20] I need to learn how to handle this service of yours
[20:59:54] By sw log text 🙏
[20:59:37] What do u mean please
[20:55:53] it\' very important my friend
you must always copy/paste sw log text!
[20:54:45] Click here @FlashFileSearchBot and type there phone name. You will get links
[20:49:24] Nothing found for Q720ps

If you will get the file upload it to support with iosFileUploader

[20:49:08] Ok, good. It\'s right way
[20:48:54] ok good
in this case you have all MTK support already enabled.
run exe and do the job with your phone.
in cas eof any problem you may post your problem details to support forum
[20:48:43] That was the first thing I did
[20:47:43] Lg Q720ps flash file needed
[20:47:32] Am done man
[20:45:15] Ok boss
you must install cpu drivers first
do it now
[20:44:22] You know I have just purchased this tool man that\'s y a asking for your help
[20:41:41] Are you Ok?
How is people can help you if you don\'t give them operation log?
[20:35:42] Man I have seen it
Now how important is this operation log, please help me
[20:31:36] post sw log text https://infinity-box.com/?r=100199
[20:29:07] Man I have tried but it\'s not reading my device don\'t know why
[20:28:44] Only bluetooth restrict?
[20:27:57] jst run CM2MT2.exe and try to connect phone
[20:27:33] You can ask sellers from this list https://infinity-box.com/buy/
Also Aliexpress makes delivery to any country
[20:26:46] What link do you need?
[20:00:29] I request for a video on how to remove pop2 from using dongle, the chip is 6580 and my dongle has no that in mt2 please some help members
[19:56:57] M325F bootloader unlocked logo fix file please share?
[19:56:18] Members I need your help please on how to add mt2 6580 in my dongle
[19:52:23] Have done that
[19:51:28] Can i get cm2 dongle in Ethiopia ?
[19:43:06] Was nothing wrong, phone was full memory only so very slow and warning mamory full... Owner decided to factory reset though battery was not enough power so problem stated there.
[19:28:58] Help link
[19:19:55] Device wifi or hot spot working?
[19:19:54] Yes is working fine
[19:05:41] try \"fast chek\" from support
[19:04:54] I try many tools but no success
[19:04:12] Sm-t290 frp?
[18:57:30] Flash with another firmware
[18:56:20] Device wifi or hot spot working?
[18:55:31] Initial State before flash?
[18:53:27] Test point or brom mode working?
[18:36:43] Flash latest file
[18:35:27] You can buy Infinity Dongle here https://infinity-box.com/buy/
[18:34:59] try another FDL or check hardware
[18:32:03] How to remove frp from samsung sm-t290?
[18:29:41] Please send main chat room
[18:29:13] Found 3 files TA-1334
1. Nokia_G10_TA_1334_G10_MT6765_HMD_Global_00WW_11_00WW_1_070_RP1A.200720.011_ROGA_sprout.2021_04_05
2. recent_Nokia_TA_1334_G10_MT6765_HMD_Global_00WW_11_00WW_1_070_RP1A.200720.011_ROGA_sprout.2021_04_05
3. recent_TA_1334_nvram

[18:28:55] Nothing found for ta1334

If you will get the file upload it to support with iosFileUploader

[18:28:01] Spd9863a
[18:27:47] Itel s16 pro vision 2 frp supported ?
[16:59:17] Can you please find it.
[16:59:03] I have a request for the series dark.
[16:21:33] Identify is OK
[16:00:52] Bro
Mtksp2 say
Kick FDL
Again Kick FDL
AND NOT REPONDING
[15:19:01] Sorry 🥲❤️
[15:18:06] 3rd time: https://www.youtube.com/results?search_query=cm2+y336+flash+file
[15:17:28] Y336-U02V100R001C328B113-USB PAC ROM File By (Support.HalabTech.Com)
[15:17:05] Now Flash By Cm2spd ?
Or Sp2 ?
[15:16:22] but if you can not write flash or can not boot phone - think about HW problem
[15:16:03] it may be many reasons
[15:15:46] just change emmc !
[15:08:25] Welcome
[15:07:52] Reset Click ok dongsl manager get email with new Pascode login done problem Solved Thanks 😊
[15:01:46] https://forum.infinity-box.com/viewtopic.php?t=6035
[14:57:33] Hang On Logo
Not Go To Recovery By Power & Vol
[14:53:18] is your phone dead state?
[14:52:55] https://www.youtube.com/results?search_query=cm2+y336+flash+file
[14:51:52] finally read text by my link
[14:51:52] Stop Here
I Boot By Vol + & -
[14:51:35] Read from dongle manager
[14:50:53] you must use good password!
[14:50:43] Show this errror
[14:50:07] your fake username is off
you must use your good username
[14:50:05] I login this user mame
[14:49:48] Still what?
[14:49:36] Still sir
[14:41:51] Use By Cm2sp2 ?
[14:28:24] Both
[14:07:16] Infinity #CM2SP2 create and use (.fg) file https://infinity-box.com/?r=100179
[14:06:54] https://forum.infinity-box.com/viewtopic.php?t=5011
[14:06:11] reset or reflash
[14:05:50] Yes, devices after otra update, turn into Infinity bootloop restart constantly, after wipe, flash and so on, problem persist... Any suggestion?
[14:05:28] check latest manuals here please https://forum.infinity-box.com/viewforum.php?f=3
[14:04:22] How To Use For Loader ?
[14:03:22] Any problem?
[14:03:14] Hello, tecno spark pop 5 lite Infinity loop solution?
[14:03:13] select another loader or use pac as loader
[14:00:25] try many times
[14:00:24] Let me read info
[14:00:09] say : pickup loaders from pac file
[13:58:24] remove cable
try again
[13:58:05] Ok thanks
[13:57:58] next screen photo may gives you ban, you must read chat rules https://infinity-box.com/?r=100172
[13:57:55] ???
[13:57:36] use it in 30 min
[13:56:34] https://infinity-box.com/?r=100172
[13:55:35] 00CF619B7A
[13:52:50] your fake username is closed now.
you have last chance to tell me good username and get credits there
after 10 minutes this offer will be expired, I am tired with your fake username
[13:51:46] my last question: what is your real good username?
[13:51:17] 😏😏😏
[13:51:09] Sir am using same username since i join infinity manu year now
[13:51:09] .
[13:51:05] mean ?
[13:49:28] Very good!
Please upload it one-by-one when you will have free time
[13:48:58] connect device agai and do it once again
[13:48:35] https://t.me/cm2_fr or translate.google.com
[13:47:59] No idea.
What do you want to do?
[13:47:37] What is the model name?
[13:47:15] do you understand now?
[13:47:00] Found 1 file ta-1233
1. N_C2_N_C2_TA_1204_TA_1233_here

[13:46:49] you must use GOOD username but not fake one!
[13:46:38] check all my previous messages to you one by one
[13:46:29] \\file TA-1233
[13:46:22] I don’t understand what to do bro
[13:46:12] [Info] : If SW freeze here more, than 15 seconds - remove cable
[13:45:41] https://infinity-box.com/?r=100172
[13:45:38] bro please check this
[13:45:16] Ok, no problem, you can continue and ignore my words.
Customer is a King.
[13:45:11] Photo from Gsm Africa Official
[13:44:43] How many times should I repeat about fake usernames?
[13:44:40] ...
[13:44:22] Check bro i add credit too
[13:44:12] Select another loader
[13:44:11] ....
[13:42:02] what is your Username?
[13:41:42] fake username
you must use good username this way https://infinity-box.com/service/
[13:41:32] Its not fake maybee you remove by server
[13:40:48] fake username
you must use good username this way https://infinity-box.com/service/
[13:40:30] Basharatac@gmail.com
[13:40:27] run Infinity CM2SP2.exe and do the job
[13:40:22] Basharatac
[13:39:48] what is your username?
[13:39:11] Can i send email here
[13:39:09] Where is swl log text?
[13:38:53] Where is sw log text?
[13:38:40] What is the error message text?
[13:38:26] https://infinity-box.com/?r=100172
[13:38:03] My account in have email butt I can’t even reset by webstirw now i had like 85 credit inside my account
[13:37:53] Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
[13:37:30] you may try to reset or flash it
[13:36:53] Make this https://infinity-box.com/?r=100155
[13:36:37] https://infinity-box.com/?r=100172
[13:36:02] UNINSTALL avast and never use it!
[13:35:24] https://www.youtube.com/results?search_query=cm2+y336+flash+file
[13:34:47] Found 1 file cph2001
1. Oppo_Realme_CPH2001PUEX_11_C.47_201125_Extracted

[13:34:31] Found 1 file Alcatel 5001
1. Alcatel_TCL_SP9863A_Alactel_TCL_5001A_9_5001A_AEUY_1SIM_V1.7_20200611_UNLOCK_P_PPR1.180610.011_Wright

[13:33:52] Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[13:33:29] Write here
[13:33:04] Loading : Y336-U02V100R001C328B113.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC7731_2341A
PacVersion : Y336-U02V100R001C328B113
FastCheck : 0x00502EA8CC

Loading files ...

File : fdl1.bin
File : fdl2.bin
File : wnvitem.bin
File : wcnnvitem.bin
File : u-boot-spl-16k.bin
File : wmodem.bin
File : wdsp.bin
File : wcnmodem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo.bmp
File : logo_1.bmp
File : sysinfo.img
File : custommenaf.img
File : prodnv.img
File : cache.img
[13:33:02] Nothing found for Desire 12

If you will get the file upload it to support with iosFileUploader

[13:32:44] your account login is fake - it\'s your problem
[13:32:11] you must enter GOOD username and password!
read this https://infinity-box.com/service/
[13:31:30] model?
[13:31:01] first restore original nvram if you have it
after that try to use unlock button
[13:29:44] Server On, as ordinary
[13:29:35] O9k
[13:29:11] With pleaseure!
Here is it https://www.youtube.com/results?search_query=cm2+Flash+Pac+File
[13:25:52] https://www.youtube.com/results?search_query=cm2+CG6j+frp
[13:25:34] Thanks boss
[13:24:51] find firmware somewhere and try to flash
[13:24:30] it may be faulty emmc chip
[13:24:16] It spd not Mtk
[13:24:05] No idea
But you may try to flash it with another firmware version
[13:24:00] It charges but can\'t boot to screen
Just stock on logo
[13:23:12] It\'s done but still
[13:21:11] it may be faulty emmc chip
also you may try to reset it first but not flash
[13:20:35] Found 3 files TIGI V6
1. Prestigio_MT6735_Prestigio_PSP5551DUO_DW55B02L_5.1.1_ALPS.L1.MP3.V2_DWAV6735.65U.O.L1_P2.20160502.1.0.16
2. Prestigio_NVM_Prestigio_WIZE_3131_3G_MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V61_P5_1_wg_n_eMMC
3. Prestigio_NVM_Prestigio_PAP5044_Duo_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P
[13:09:02] Done
[13:02:43] Please team I need X-TIGI V6 flash file
Device hang on logo
CPU Spd
[12:47:01] CPU is spd
[12:46:35] Please team I need x-tigi V6 flash file
Device hang on logo
[12:40:08] Unknown baseband
[11:48:05] Please admin I need Ur help I change the file the same thing
[11:45:36] Help please..!
[11:45:23] Need help, NOKIA C1 flash file compatible with cm2
Phone always restart and hang on logo after hard reset
[11:41:29] Nothing found for u318aa

If you will get the file upload it to support with iosFileUploader

[11:35:39] Good afternoon, help me remover frp tecno CG6j android 12
[11:23:30] Found 21 files aqua, search limit is 20 files per server
1. Aquaris_MT6735_bq_Aquaris_A4.5_Aquaris_A45_sprout_6.0_alps_mp_m0.mp3.a1sp_V1_lcsh6735m.a1.m_P7
2. Aquaris_AQUARIS_BQX_MSM8953_ANDR_v8.1.0_Aquaris_X_bardock
3. Aquaris_MSM8952_bq_bq_ANDR_v7.1.1_Aquaris_X5_Plus_Aquaris_X5_Plus_Aquaris_X5_Plus [11:23:11] Nothing found for infie

If you will get the file upload it to support with iosFileUploader

[11:17:24] Sm a125f u2 mdm file
[10:38:29] Send logs here bro
[10:32:37] Please Guide Supporter 😃
[10:32:13] Hi
Y336-02
Flash By Pac
How TO

i hold Vol + & -
Boot ok But Flash Not Start
[10:27:18] Is Tecno spark 4
[10:26:57] Server Off?
[10:22:05] Ok
[10:15:45] good morning sorry how much to unlock A032F SPD
[10:11:03] Need help, NOKIA C1 flash file compatible with cm2
Phone always restart and hang on logo after hard reset
[09:55:34] Identify with cm2
[09:54:37] A325f knox remove supported ? help
[09:45:28] What\'s the solution
[09:45:10] Please help is nokia C10 permanent locked
[09:44:28] Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.46B_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P4_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P4
HW Version: sc7731e_modem
CMP_Time : 08-24-2021 17:58:44

MODEM TAG : MOCORTM_17C_W21.11.2_P4_Debug_FM_BASE_17C_W21.11.2_P4_sc7731e_modem_pike2_
[08:46:20] Found 5 files SM-G532F
1. flashfiles_SM_G532F_G532F_twrp
2. flashfiles_SM_G532F_SM_G532F_1_20181008082414_9i5fhg4nsz_fac
3. flashfiles_SM_G532F_GRANDPPLTE_CIS_SER.pit
4. flashfiles_SM_G532F_G532FXXU1APL1
5. [08:35:18] Hii naifanyaje jamna
[08:15:30] This suport?
[08:14:38] Oppo mtk network lock suport?
[07:44:43] No
[07:43:38] Wrong logins
[07:33:43] Can be fixed
[07:33:26] Can’t remove for spark 7 Using Frp file
[07:32:44] yah it\'s sever errors
[07:32:15] Same issue butt my account login good
[07:31:44] How to dm u
[07:21:35] 2Q5W100
[07:18:15] HTC Desire12+
Fimware eny link?
[07:11:24] Found 23 files BD3, search limit is 20 files per server
1. Huawei_Honor_NVM_HUAWEI_CRO_U00_MT6580_6E0F3FBBD33CFF07FFA46C3144BCFC32
2. Tecno_BD3_WZ802AB_RGo_OP_210707V017
3. Tecno_BD3_WZ802AB_RGo_OP_210930V020
4. RM_1011_10.01.11_059
[07:09:10] Card found : E6FA2D2E , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.2010
[06:58:59] Found 2 files SM-A022f
1. Samsung_MT6739_samsung_SM_A022F_10_QP1A.190711.020.A022FXXU2AUF1_QP1A.190711.020_a02
2. Samsung_MT6739_samsung_SM_A022F_11_RP1A.200720.012.A022FXXU2BUK3_RP1A.200720.012_a02

[06:58:15] Nothing found for SM-A0225F

If you will get the file upload it to support with iosFileUploader

[06:55:13] Found 2 files bd2p
1. Tecno_BD2p_SP613DEF_RGo_OP_210825V8
2. Tecno_NVM_BD2P_867400020316612_w_fixnv1_a.nvm

[02:31:37] Hi my friends
Whats the best box or dongel for qualcomm.
In particular xiaomi
Thank you 🙏🙏
[01:00:35] without otp
[01:00:25] Need ase more power for repair imei to mtk
[00:39:27] Firmware Alcatel 5001j
[00:39:17] Oppo cph2001 if anyone have backup file please 🙏 share it

InfinityBoxTalks 2022-08-03

[22:47:42] Hi
I Want Flash Huawei Y336-02 By .Pac Firmware

Sc773x
How To ?
[21:25:34] Ok thanks alot sir
[21:25:13] Do that for mt2..and download new setup
[21:24:50] Every other module is opening. Spd and the rest are opening the problem is just with the cm2MT2.
[21:21:50] 1 install avast antivirus
2 uninstall cm2 all
3 re install cm2 while avast is active ....


NOTE you have virus on pc..blocking cm2👍
[21:20:35] Pls I need help with my dongle it just come up like this and nothing will show again.
[20:26:37] Solution please
[20:21:28] Itel A16
Hang on logo and show fast boot.
[19:26:45] Shaaa
[19:26:34] Yes now its a big troule
[19:25:50] GAME DOWN
[19:25:38] OOOPS
[19:25:04] Yes on old updates but on new updates it closed.
[19:20:33] SINCE WHEN? C10 AND C20 WORKS
[19:03:58] 😕
[18:55:12] 🤣🤣🤣🤣 Nokia HMD diag also is clossing
[18:51:21] Nokias c20 and c10 and many new models not possible in flash mode, only in diag mode which is now a problem on these phones.☹️
[18:39:58] Look like they closed diag on new updates on c10 and c20 just like nokia c1 2nd edition 😭, another problem again with nokia.
[18:13:54] help me
[18:10:09] Spark 5 air kd6 setup emi prams failed
[17:12:51] ?????
[17:05:03] Infinity cm2 failed to unlock Alcatel 5033G
[17:02:57] Cm2 unlock Nokia ta1352?
[16:54:29] #CM2SP2 connection issue solution is HERE
[16:54:29] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
>>> ERROR : FLASH FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
[16:50:02] Please scre lock remove help urgent
[16:36:29] For spark go 2022 work to spark go 2021???
[16:35:05] Yes
[16:28:12] Bonsoir la famille
J\'ai besoin de c\'est logiciel aider moi svp, envoyer le moi j\'en ai vraiment besoin
[15:57:37] Operation: Upload
E:\\3uTools\\MT6582__Mtouch__M1__joya89_wet_kk__7.0__KT096H_20150828.7z
Verify file: MT6582__Mtouch__M1__joya89_wet_kk__7.0__KT096H_20150828
Authentication...
Initialization...
Upload file 327.30 Mb
03-08-2022 20:46:55 Uploading 327.30 Mb...
03-08-2022 20:52:36 Finished
Verification...
Ok
[15:50:30] all file tested
[15:49:38] i have 1500 different files not other any website
[15:42:09] use default loader
see first image here https://infinity-box.com/?r=100187
[15:38:49] Operation: Upload
E:\\3uTools\\Nomi_i5730.zip
Verify file: Nomi_i5730
Authentication...
Initialization...
Upload file 1.23 Gb
03-08-2022 19:50:17 Uploading 1.23 Gb...
03-08-2022 20:21:09 Finished
Verification...
Ok
[15:14:52] 🙏
[15:14:05] How should I add it in my box
[15:13:33] Have u seen mtk6580 it\'s not there
[15:11:06] It is not there in my cm2mt2
[15:11:00] do not push me to ban you, my friend
read https://infinity-box.com/?r=100172
[15:10:34] run CM2MT2.exe
[15:10:24] It may be that SVC is Off.
Try with FLASH mode
[15:10:03] Ticno t402 what the problem
[15:10:02] Mtk
[15:10:00] Chip is 6580
[15:09:59] Please members pop 2 plus pattern unlock
[15:09:44] run CM2MT2.exe
[15:09:32] https://infinity-box.com/?r=100200
[15:09:27] https://infinity-box.com/?r=100200
[15:09:24] https://infinity-box.com/?r=100200
[15:09:12] https://infinity-box.com/?r=100200
[15:09:08] https://infinity-box.com/?r=100200
[15:09:04] https://infinity-box.com/?r=100200
[15:09:00] https://infinity-box.com/?r=100200
[15:08:55] https://infinity-box.com/?r=100200
[15:08:54] The chip is 6580
[15:08:51] https://infinity-box.com/?r=100200
[15:08:46] https://infinity-box.com/?r=100200
[15:08:43] https://infinity-box.com/?r=100200
[15:08:38] https://infinity-box.com/?r=100200
[15:08:36] Pleaese
[15:08:33] https://infinity-box.com/?r=100200
[15:08:32] Members pop 2 plus pattern unlock using cm2 dongle
[15:08:29] https://infinity-box.com/?r=100200
[15:08:24] https://infinity-box.com/?r=100200
[15:08:21] https://infinity-box.com/?r=100200
[15:08:16] https://infinity-box.com/?r=100200
[15:08:11] https://infinity-box.com/?r=100200
[15:08:04] https://infinity-box.com/?r=100200
[15:08:01] https://infinity-box.com/?r=100200
[15:07:56] https://infinity-box.com/?r=100200
[15:07:52] https://infinity-box.com/?r=100200
[15:07:49] https://infinity-box.com/?r=100200
[15:07:46] Reconnect Power/Cable!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on d
[15:07:44] https://infinity-box.com/?r=100200
[15:07:40] https://infinity-box.com/?r=100200
[15:07:36] https://infinity-box.com/?r=100200
[15:07:32] https://infinity-box.com/?r=100200
[15:07:17] having same issue in some of the devices
[15:07:14] https://infinity-box.com/?r=100200
[15:07:09] https://infinity-box.com/?r=100200
[15:06:26] 🙏🙏
[15:03:10] post sw log text https://infinity-box.com/?r=100199
[15:02:58] What is the problem?
[15:02:41] restore original imei
[15:02:15] where is log text?
[15:02:04] Seems nokia c10 and c20 have closed diag mode like nokia c1 2nd edition, i tried 2 both of the start charging.
[15:02:04] you must read chat rules https://infinity-box.com/?r=100172
you will get ban for the future videos and photos
good luck!
[15:01:30] Make this https://infinity-box.com/?r=100155
[15:00:27] Is it your model?
[14:58:57] look here https://infinity-box.com/?b=2145#2145
[14:58:21] Wrong username and/or password
[14:58:05] Thanks for the file!
[14:57:52] read this carefully https://infinity-box.com/service/
[14:57:35] Thanks for the file!
[14:53:25] chat rules https://Infinity-box.com/?r=100172
[14:53:10] check chat rules my friend, it\'s clear
[14:52:43] Okay! Sorry I didn’t know
[14:52:03] First time no problem but 2nd time you will get ban for the photo of your LCD
you must post TEXT
[14:51:25] solution 100% for you - you must use good password
[14:51:06] you must use GOOD PASSWORD!
read this https://infinity-box.com/service/
[14:50:53] This
[14:49:57] Read your log the server is failed your server most be well OK connect your system then select correct fdl
[14:49:34] What is your issue my friend?
[14:47:23] Please reply to my issue
[14:46:51] Buy dongle from any seller https://infinity-box.com/buy/
[14:44:26] Discover note7_plus face unlock 4G tablet 4Gb 64Gb firmware
[14:43:06] use CM2SCR Module Diag mode
[14:42:10] wipe failed in diag mode
[14:41:47] use cm2sp2
[14:41:37] easy
[14:31:05] First buy dongle
[14:26:18] Please I want to know how use cm2 without dongle
[14:22:58] Before it was asking me to put userdatails
[14:20:28] Any operation brings this error
[14:16:48] Solution please! I’m working on techno BD1
[14:08:07] Operation: Upload
E:\\3uTools\\SP7731E__Kimfly__Mito_A67__8.1.0__J063-H5-Gs-V01-20210602__OPM2.171019.012__A67 ideal mobile.rar
Verify file: SP7731E__Kimfly__Mito_A67__8.1.0__J063-H5-Gs-V01-20210602__OPM2.171019.012__A67 ideal mobile
Authentication...
Initialization...
Upload file 738.13 Mb
03-08-2022 18:47:41 Uploading 738.13 Mb...
03-08-2022 19:02:00 Finished
Verification...
Ok
[13:46:29] Logins extracted from dongle manager
[13:45:39] Operation: Upload
E:\\3uTools\\MT6570__alps__A91__6.0__MRA58K__A91.rar
Verify file: MT6570__alps__A91__6.0__MRA58K__A91
Authentication...
Initialization...
Upload file 659.52 Mb
03-08-2022 18:34:52 Uploading 659.52 Mb...
03-08-2022 18:44:14 Finished
Verification...
Ok
[13:45:18] Please help me with this error! I have putted the right username and password
[13:42:40] Please help me members I need this money
[13:41:29] How can I know it\'s chip
[13:41:04] What do u mean bro
[13:40:32] Please help
[13:40:08] Which chip ?? Bro
[13:39:49] 🙏
[13:39:39] need to open security code ….help someone plz
[13:39:29] I need your help members
[13:39:06] Excuse me how can I remove a password from pop 2 plus using cm2 dongle
[13:38:53] i did it bro
[13:38:20] Uninstall 1st then reinstall & change the location ..
[13:36:58] infinity best2 not opening can someone help?
[13:10:49] dont restore repar direct
[13:10:09] How
[13:07:35] I have tried to restore the imei but it failed
[13:06:58] Card found : 59C52AB4 , v0153
Infinity-Box LG Service Tool [ LGS ] v1.02

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ...
Handshake passed!
Collect info...

Running : MiniOS 3.0 , ver.1.1 , with proto ver.00000001
HWInfo : BaseBand : SDM845
HWInfo : ChargeLv : 19%
HWInfo : MEM_INFO : THGAF8 , MEM_LEN
[13:03:51] repair imei
[12:57:47] hi cm2 can unlock lg g7 thinq
[12:55:23] Why what error?
[12:54:55] Yes
[12:52:34] Tecno KG7h can’t boot and can’t flash any solution?
[12:47:35] How I remove payjoy on Stylo Bold Plus
[12:39:38] Nokia best tool pls we need update for Nokia latest Android phone solution pls team pls update best dongle nokia
[12:19:41] Found 1 file Kicka 5
1. Mobiwire_MobiWire_Halona_Vodacom_Smart_Kicka_3_V06_20180510_MP_MT6572

[12:10:42] I need this file please give correct link
[12:10:05] Patch Level : O11019
Display ID : O11019 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2021-05-05
Build Time : 22.04.2021
Product Model : Kicka 5
Product Brand : MobiWire
Product Name : Kicka_5
Product Device : Kicka_5
Product Manfct : MobiWire
Product Info : k80hd_bsp_fwv_512m
Board Platform : mt6580
Product Board : VP506_Mobiwire_Kicka5
[11:58:46] Qiku 8681 A01 DA file please?
[11:44:42] Found 10 files mobicel
1. Mobicel_MOBICELL_RUBY_8.1.0_SP7731E
2. Mobicel_MT6580_Mobicel_Mobicel_R1_Mobicel_R1_7.0_alps_mp_n0.mp2_V1_tinno6580.we.n_P144
3. Mobicel_MT6580_R1_7.0_Mobicel_ZA.V3740AN_MCL_01
4. Mobicel_Mobicel_Astro_andro
[11:43:25] Found 11 files Hisense
1. recent_MT6735_Hisense_Hisense_L675_HS6735MT_6.0_alps_mp_m0.mp1_V2.39.1_hisen6735.35u.m0
2. HMobile_Hisense_F22_MT6737M_7_0_alps_mp_n0_mp1_V1_0_2_hs6737m_35_n_P1_2018_03_22_17_21_stock
3. Hisense_MT6589_Hisense_HS_U970_u970e_6_4.2.1_ALPS.JB2.MP.V1.2
4. [11:26:50] revvlv v+ 5g network unlock try after imei invalid
restore orginal security after same
[11:25:54] revvlv v+ 5g network unlock try after imei invalid
restore orginal security after same
[11:24:43] Can\'t do force update... Phone has imei lost
[11:23:35] Device Connected!
BootVersion : SPRD3
Boot : PAC : LYF_F271i_000-02-03-230321.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x1E
PMTMng : Update PMT Ok!

NVRM : ltenvitem.bin
NVMng : Load 0x2C
NVMng : Init SRC
NVMng : Trying use recover mode
NVMng : Security DAMAGED!
NVMng : Ba
[11:22:58] need help
[11:22:25] restore security after same
[11:21:55] network unlock try after imei invalid
[11:21:17] revvlv v+ 5g
[11:20:49] need help
[11:01:37] Tecno china phone what\'s the boot SPD frp
[10:50:58] Hi
[10:50:53] post sw log text
[10:29:00] Hi
[10:13:51] I have tried and it\'s failing fdl not started
[10:13:09] Friend, just try and see result.
post sw log text in case of any problem
[10:06:45] Mobicel Legend Max is it supported for frp?
[09:46:05] Found 1 file mobicel v4
1. Mobicel_SP7731E_Mobicel_V4_8.1.0_OPM2.171019.012_y400

[09:45:14] Nothing found for mibicel v4

If you will get the file upload it to support with iosFileUploader

[09:44:33] Nothing found for v4 mobicel

If you will get the file upload it to support with iosFileUploader

[09:41:26] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset Settings [ Format FS ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Wipe failed!
>>> INFO : FRP reset require FlashMode!

Reconnect Power/Cable!

Done!
Elapsed: 00:00:21
[09:38:10] mobicel v4 file
[09:35:48] post sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[09:35:33] Kata kucha kwanza
[09:34:59] Need help to remove password ... I tired many ways but unfortunately not done ... plz reply Me if u successfully remove password.
Thanks 😊🙏
[09:25:14] https://www.youtube.com/results?search_query=cm2+032f+frp

best way - try and post sw log text
[09:13:34] How to remove frp for Samsung a 032f SPD sc9863e
[09:12:18] If you will get the file upload it to support with iosFileUploader
[09:06:11] Nothing found for y20i

If you will get the file upload it to support with iosFileUploader

[09:05:57] use Infinity [BEST] https://infinity-best.com for RM-840
[09:04:52] Found 1 file Tecno LB7
1. Tecno_LB7_H393DEF_O_210205V309

[09:04:28] How to use Infinity CM2 and [BEST] Dongle with sharing and debug tools - https://infinity-box.com/?r=100174
[09:03:53] Found 1 file ta-1165
1. N_C1_N_C1_TA_1165_here

[09:02:34] Found 1 file Tecno LB7
1. Tecno_LB7_H393DEF_O_210205V309

[09:02:16] you killed dongle with sharing.
Now use free repair method after sharing https://infinity-box.com/?r=100194
[09:00:46] Found 1 file Spark Go
1. recent_Tecno_Spark_Go_2022_KG5m_MT6761_11_KG5m_H6125C_RGo_OP_211206V257_HiOSv7.6.0_OS7.6_R_P74_210222

[09:00:33] Nothing found for H6123D

If you will get the file upload it to support with iosFileUploader

[09:00:21] Nothing found for tigi v11

If you will get the file upload it to support with iosFileUploader

[08:54:39] How send me this firmware
https://support.halabtech.com/index.php?a=downloads&b=file&id=650282
[08:48:07] Found 2 files tecno kg7h
1. Tecno_KG7h_H6511CDEF_R_OP_211105V255
2. Tecno_NVM_Tecno_KG7H_NVRAM

[08:47:19] Mdm can dm for help
[08:45:48] Not sure
[08:44:20] Is the NVRAM in this package?
[08:29:54] Found 2 files Tecno KF7j
1. Tecno_KF7j_H696RTAjAk_R_OP_211013V460
2. Tecno_KF7j_H696RTAjAk_R_OP_210820V452

[08:29:28] Find online bro
[08:29:09] Can I use the NVRAM fix to repair, i don\'t another phone around.
[08:28:21] Yes bro you need to get a working device and read back NV then write on this
[08:27:30] Tecno KF7j
[08:24:05] Yes
[08:23:50] KF7j
[08:23:37] Model?
[08:23:23] Mdm lock bro
[08:13:39] When setting imei2, it shows this, is it because NVRAM is damaged?
[08:13:10] Nokia 2.4 TA-1270 anyone help me plz
[07:52:48] It works now. thanks.
[07:49:45] It is not working. You mean Set UK Edition Off,right?
[07:47:28] If not working, launch Dongle manager and do uk.off
[07:46:33] Put there, not in any folder, then restart setup and go
[07:44:56] Thanks, but I can\'t find setup folder:
[07:41:06] Find uk.off and put into cm2 setup folder
[07:30:04] If the cm2 tool can change imei? I find mine doesn\'t show imei modify functions which shows in the video.
[07:28:10] I\'ve unpluged the dongle and restart DongleManager,then everything works well.
[07:02:00] Please anyone with x-tigi v11 firmware
[06:45:08] KE5-H6123D-RGO-INJO-LC-211221V379 link please
[06:28:22] Hello, I need the firmware link for Spark Go 2021 pls
[06:19:25] Pls help
[06:18:35] Tried no way sir
[05:59:35] Make this https://infinity-box.com/?r=100155
[05:59:35] Help me my cm2 got blocked or misconfiguration help to fix
[05:56:52] Help me this is what am facing on cm2 newly bought,
[05:55:02] Found 1 file lb7
1. Tecno_LB7_H393DEF_O_210205V309

[05:48:57] Please someone help me with Tecno LB7 nvram file
[05:46:53] Pls can someone help me to unblock my cm2 dongle
[05:45:00] Think it\'s being used versely to remote are you sure with this??
[05:44:16] Good day my cm2 got block when trying to open it can some one help me pls
[05:43:27] Pls
[05:41:24] We cant help you to kill your dongle. Cm2 cannot be used remotely unless you want to kill it
[05:30:38] Hello can someone help me am trying to connect with my friend through TeamViewer I want to use cm2 flashbox but when I try running in his computer it\'s displaying smartcard module not found and have install VPN drivers in his computer...
[00:54:40] Please someone help me with Tecno LB7 nvram file

InfinityBoxTalks 2022-08-02

[22:05:28] Hi support live flash y20i v2027?
[22:01:04] I need this firmware
https://support.halabtech.com/index.php?a=downloads&b=file&id=650282
[21:08:46] you selected it already
[21:08:23] Very good!
[21:08:16] post sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[21:07:56] Admin any solution
[20:59:49] Who much
[20:59:26] Yes
[20:58:18] Nokia ta 1380 unlock plz help me
[20:53:20] SPD is Ok
[20:47:47] I have done exactly that, i have freed my disk space still not working
[20:44:52] You\'ve been invited to join the Sweatcoin race \"August 250K step challenge \" https://sweatco.in/app/race/ciilowyuusuf/234
[20:43:18] Which cpu should i use
[20:41:21] Oppo A 31 security code with cm2??
[20:38:52] Can do
[20:38:34] Check out this free app — It Pays to Walk 🚶 https://sweatco.in/i/ciilowyuusuf
[20:34:47] Oppo A 33 security code
[20:20:57] SPD
[19:29:42] good, it\' MTK but not SPD

1. Disable PC Antivirus
2. Reboot PC
3. Login to PC as Administrator
[18:14:56] Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FULL FACTORY ( FORCED + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM39)
MODE : PRELOADER PORT
PORT : 39
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel :
[18:02:26] post sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[18:01:48] inbox is little bit forbidden here, you may get ban
if you know how to fix write here for everybody
[18:00:55] https://www.google.com/search?q=0x000007b+error
[18:00:19] what is the model name and firmware version?
[17:55:47] Neon ray 2
Neon ray
Neon ray pro

All spd cpu
[17:55:06] It\'s true neon ray is an spd not neon ray 2
[17:53:40] Take it from me neon ray is an spd based smart phone
[17:52:56] No i don\'t think, not even a detection on spd
[17:50:46] dm me
[17:50:14] Its spd

Need 5 credits for unlock
[17:47:37] I understand its an mtk which do i use
[17:36:21] HMD SERVER BRO
[17:26:52] Please I need this file any help
[16:45:04] nokia 1.4
[16:44:42] Model?
[16:02:52] Phone found!
Series 40 Device detected! [DCT4+]
read info... - Ok

Reading Phone Info....
SW ver : V 09.75 07-01-10 RM-590 (c) Nokia
IMEI : 352694048243053
PPM : V 09.75
07-01-10
RM-590
(c) Nokia
AE
CNT : Content: orange FR
V 09.75
07-01-10
RM-590
(c) Nokia


DSP Ver : PR72_09w52_U
PCode : 059C062
BPCode : 0582851
HWID : 1000
LCDVer : SUEZ
IMEI : 352694048243053
Sl Conf : 001-01-00000000000
Sl Prof : 00
[14:42:01] Ok
[14:29:59] use built-in loaders
[14:18:34] Itel S17 boot file please
[14:14:49] kaise kar sakte hain batao
[14:14:18] Bypass ....need use hindi language
[14:13:34] 1.4 nokia
[14:13:10] Model
[14:09:51] Thanks
[14:01:30] itel S17 boot file please
[14:01:08] need to bypass only frp sir ..tried privacy policy method dont press there ..also contact doesnt shows and changing launggauge also dont work ..any other solution be side of this 🙏🙏
[13:47:28] ok
[13:45:20] try to select another base or install mtk boot-pack
[13:44:38] No ideas. Forum is not ours.
Consider to use 2nd forum in case of problems with 1st one
[13:44:24] DA file wiko kenny
[13:44:03] Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM11)
MODE : PRELOADER PORT
PORT : 11
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000001
BROM :
[13:34:45] i didnot find i way to do that
[13:34:33] how to contact forum admins
[13:29:10] check mailbox or contact to forum admins
another way is use backup forum
[13:23:20] Anyone hav samsung G975N-U7-OS12 auto patch file plz
[13:22:56] Anyone hav samsung G975N-U7-OS12 file plz
[13:18:19] i really need it,
[13:18:09] now i want to get access to post thread on the forum to get my dongle work again,
[13:17:31] because i am using arduino vcom i get suspend for my cm2 dongle
[13:16:00] how to get access to post on the great forum
[13:12:53] hello every one
[13:05:08] Your SN?
[13:03:22] https://www.youtube.com/results?search_query=ta-1322+frp+cm2
[13:02:25] run CM2SP2.exe and do it.

Setup server access https://infinity-box.com/?r=100166
[13:01:56] https://infinity-box.com/support/?s=6
[13:01:42] Device present state?
[13:01:37] it should be their site or group somewhere.
Here is group about https://infinity-box.com/
[12:57:49] https://youtu.be/xm86J_4KI24
[12:52:06] nokia ta 1322 (1.4) need help for frp remove only ..plzz can someone help
[12:45:28] Can you help me please
[12:45:17] Nokia c10 network unlock I need help
[12:44:47] Good afternoon everyone
[12:38:37] Got a new dongle how do i register it
[12:38:16] easy jtag plus
[12:38:00] anyone know how to use jyag plus
[12:29:05] https://infinity-box.com/?r=100198
[12:29:00] https://infinity-box.com/?r=100198
[12:28:56] https://infinity-box.com/?r=100198
[12:28:50] https://infinity-box.com/?r=100198
[12:28:45] https://infinity-box.com/?r=100198
[12:28:38] https://infinity-box.com/?r=100198
[12:28:32] https://infinity-box.com/?r=100198
[12:28:27] https://infinity-box.com/?r=100198
[12:28:22] https://infinity-box.com/?r=100198
[12:28:18] https://infinity-box.com/?r=100198
[12:28:14] https://infinity-box.com/?r=100198
[12:28:09] https://infinity-box.com/?r=100198
[12:28:03] https://infinity-box.com/?r=100198
[12:28:00] https://infinity-box.com/?r=100198
[12:27:56] https://infinity-box.com/?r=100198
[12:27:53] https://infinity-box.com/?r=100198
[12:27:46] https://infinity-box.com/?r=100198
[12:27:40] https://infinity-box.com/?r=100198
[12:27:36] https://infinity-box.com/?r=100198
[12:27:33] https://infinity-box.com/?r=100198
[12:27:30] https://infinity-box.com/?r=100198
[12:27:25] https://infinity-box.com/?r=100198
[12:27:20] https://infinity-box.com/?r=100198
[12:27:17] https://infinity-box.com/?r=100198
[12:27:13] https://infinity-box.com/?r=100198
[12:27:09] https://infinity-box.com/?r=100198
[12:27:05] https://infinity-box.com/?r=100198
[12:27:01] https://infinity-box.com/?r=100198
[12:26:54] https://infinity-box.com/?r=100198
[12:26:51] https://infinity-box.com/?r=100198
[12:26:47] https://infinity-box.com/?r=100198
[12:26:42] https://infinity-box.com/?r=100198
[12:26:37] https://infinity-box.com/?r=100198
[12:26:25] Good
[12:26:24] https://infinity-box.com/?r=100198
[12:26:21] https://infinity-box.com/?r=100198
[12:26:17] https://infinity-box.com/?r=100198
[12:26:13] https://infinity-box.com/?r=100198
[12:26:10] https://infinity-box.com/?r=100198
[12:26:06] https://infinity-box.com/?r=100198
[12:26:02] https://infinity-box.com/?r=100198
[12:25:57] https://infinity-box.com/?r=100198
[12:25:53] https://infinity-box.com/?r=100198
[12:25:49] https://infinity-box.com/?r=100198
[12:25:44] https://infinity-box.com/?r=100198
[12:25:37] https://infinity-box.com/?r=100198
[12:21:57] Easy buy solution
[12:19:42] Anyone help me
[12:18:49] Please
[12:18:29] Itel P661w Stuck here, how to solve it
[12:13:36] Perfect1
[12:13:13] Please explain
[12:12:49] https://www.youtube.com/results?search_query=ta-1359+hard+reset
[12:12:42] Operation : Read UserCode [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
ERROR : FDL NOT started!

Error : Loader send failed!
Wrong model selected! Select correct one!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]

Operation : Read UserCode [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert c
[12:11:41] Tecno spark 8c mdm file permanently available
[12:09:12] I can not rotate my 24\" LCD :(
give me text please
[12:08:17] only for you https://infinity-best.com/support/
[11:57:23] Need best latest setup
[11:54:24] Nokia Ta-1359 hardest please when connect to cm2 power on direct
[11:52:35] kg5k loaders are inside boot-pack
where is your sw log text?
you must post text!
[11:44:18] thanks solved
[11:36:02] Change dongle connection port
[11:35:25] when connecting boost mobile im getting this error
[11:34:53] Try to identify with cm2, send log
[11:34:33] Yes available
[11:33:24] Cm2 presently doesn’t support KG5K
[11:32:56] samsung a125f
[11:32:28] Model?
[11:29:05] anyone with dlight and mkopa solution
[11:27:35] Change platform to third on list, then retry removing frp
[11:27:09] Disable your PC firewall and antivirus
[11:24:23] Thank you
But what might be the cause \"error with message : socket Error #11001Host not found.?
[11:21:17] it works
[11:21:03] If you need solution urgently I suggest you don\'t wait but buy any other tool that can do the job.
In other case just wait and check https://infinity-box.com/news/ from time to time.
[11:16:35] Is this option still working in infinity best dongle
[11:16:28] How long? how much time can this be done?
[11:14:28] Btw, do you see in this group some kind of AI auto-responses?
[11:13:37] I know
[11:13:23] Thank you so much 💓

We\'re waiting for this.
[11:13:19] you must try all possible options.high-tech job takes time and skills, you should try and try with different options my friend
[11:12:27] finally open my link. Ok?

and check FIRST image there
[11:11:41] Almost all the da in the tecno boot have been selected I even switch to infix boot
[11:11:15] your picture was very good.
Just be noted that first priority is for users who post TEXT.
anyway you can post all what you want - text, images, video, voice.
Group has no limits
[11:09:58] Select another DA my friend, it may helps.

#CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[11:02:40] Spark 8p lod text with local sla frp pls help
[11:01:15] This is the log text pls
[10:49:17] Dear Admin, I posted a picture recently indicating the problem I\'m havening with my CM2SP2 when trying to load/flash neither SPD TECNO, INFINIX OR ITEL u said picture are not allowed in this forum. Going true some of the post I saw, people are posting their challenge with picture on it, what should have be the reason why my was an issue?
[10:41:51] Spark 8 kg7h frp have try local sla not identifying pls help oh
[10:40:52] post sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[10:39:57] it\'s the answer
[10:39:52] post sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[10:39:36] Yes! 09 April 2022
[10:39:09] I try with base 2112 with LCA local but nothing
[10:38:56] Setup server access https://infinity-box.com/?r=100166

Infinity #CM2SP2 server operation https://infinity-box.com/?r=100163
[10:38:31] Yes but I see error
[10:37:56] Did you try already?
[10:37:55] Sim detected but signal don\'t done
[10:37:37] I want to reset with cm2
[10:37:28] I have network problem
[10:36:53] What is the problem with the built-in DA?
[10:36:28] No idea yet
Do you know this model release date?
[10:35:09] X6819
[10:35:03] Please
[10:35:01] Hello I need infinix note 12i da file cm2
[10:34:14] Yes, it\'s for you regarding boot issues.
When you post many logs in one post you will get unpredictable answer
I suggest you make posts more clear.
one post - one problem
[10:33:23] OK, which is the hard way 🙈. Or infinity support code for it?
[10:32:42] Make this https://infinity-box.com/?r=100155
[10:32:22] I am not sure you can unlock it by easy way even with factory DA
[10:12:42] Pls help with this
[10:06:26] How to use server for sp2??
[09:59:02] Spark 8p kg7 h not identify pls help
[09:33:21] this for me ?
[09:32:33] #CM2MT2 connection issue solution is HERE
[09:32:33] Card found : 229539B2 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v723487 Ok!

Update configuration ...
Load IDBase v723487 Ok!

Operation : SP Unlock [ v2.34 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM24)
MODE : PRELOADER PORT
PORT : 24
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init B
[09:31:53] please help
[09:30:47] #CM2MT2 connection issue solution is HERE
[09:30:47] need assistance on DA for Nokia 1468
trying to do SP Unlock
Card found : 229539B2 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v723487 Ok!

Update configuration ...
Load IDBase v723487 Ok!

Operation : SP Unlock [ v2.34 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM24)
MODE : PRELOADER PORT
PORT : 24
W
[09:14:40] no idea then, it may be thousand of reasong
you can make a post at support forum with detailed info about the problem.
[09:13:49] I searched but i didnt find any thing
[09:12:57] try these methods friend https://infinity-box.com/?r=100189
[09:12:55] Ok sry
[09:11:51] next time you will get permanent ban.
Good luck!
[09:10:41] #CM2MT2 connection issue solution is HERE
[09:10:41] Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM22)
MODE : PRELOADER PORT
PORT : 22
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCC00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|
[09:10:24] what should I do ?
[09:09:54] np
[09:09:42] hold on
[09:09:00] Any result now?
[09:04:38] META mode failed.
Try another mode
[09:04:02] read last line carefully please
[08:57:19] Which is the 2nd forum? can you post a link?
[08:53:21] Operation : Identify [ v2.34 ]

Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM22)
MODE : PRELOADER PORT
PORT : 22
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META enter failed by timeout!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!
[08:49:21] ok
if you do not want to use 2nd forum you can wait more
[08:48:13] yes, it redirects to the room forum site, but we are waiting for confirmation there
[08:47:24] Here is frp info https://www.youtube.com/results?search_query=cm2+frp
[08:44:27] give me info
[08:44:19] Any software log text?
Any issue with software?
[08:43:44] What is your problem friend?
please explain
[08:42:46] anyhelp from you please
[08:40:31] I sggest you always start with support forum search.
There are thousands of examples there.
[08:40:00] frp sir
[08:39:15] What is the problem?
[08:39:04] read link again. You have 2nd forum link there
anyway you can wait, as you wish
[08:38:56] MT6737t
[08:38:15] I\'ve been waiting for activation confirmation for 3 days, I\'m very victimized
[08:38:07] can u help me to identify samsungG532f plz
[08:33:19] Your video added to list https://infinity-box.com/?r=50
[08:32:39] Your video added to list https://infinity-box.com/?r=50
[08:32:03] Your video added to list https://infinity-box.com/?r=50
[08:31:00] Any success with forum post?
[08:30:25] You can send all files here for all users afyer you will get it
[08:29:34] Close DongleManager
Tell me S/N or HWID - you can get it from log file.
[08:28:36] If you can provide hmd access let me know friend ;)
[08:27:51] Click to Learn more. What is there?
[08:26:51] Nothing found for E241s

If you will get the file upload it to support with iosFileUploader

[08:26:34] What server, friend?
[08:26:13] AT&T server down
[08:00:42] Hard to say. It may be something unpredictable.
Actually it will be good if you will make a search by old posts in forum and see something similar like your case.
[06:55:04] Try tricks bro
[06:52:50] Server frp
[06:52:08] Can be unlock
[06:42:16] Hi guys


🙌🙌🙌🙌
Any one who have
Energizer E241s firmware
[06:40:51] This is
[06:40:18] Found 80 files 510, search limit is 20 files per server
1. Videocon_V1539N_F520V_VC_ID_12CW130403_00_V100_130510
2. Videocon_V1510_00_V103_IND_12_09_04_2012_HB.0_6432
3. Videocon_V1510_7707_HM_L03_BT_FM_SC_6432_V103_120521_1037_Final
4. [06:39:00] Any hope with infinity best, hmd release, i heard someone saying infinity will release these updates soon and qualcomm as well. Said hot 🔥 updates are coming 😊
[04:12:07] I didn\'t close the software and unplug the dongle. The dongle is not working anymore.
[04:09:52] Hi,I have an infinity box cm2. And I\'m using doglemanager 1.91 to do upgrade, it is stuck for about 1 hour ,what should I do?
[03:58:28] Which box do you use ?
[03:01:34] Like I said the phone is not enable adb
[03:00:55] Yes but I did get a picture showing test point
[02:46:41] I need Tecno BB2 auth file? The phone is dead boot and so flash tool is asking for auth file. I already have DA
[02:30:10] hello my brother is it frp?
[00:33:34] A035F
[00:12:13] A03XXXXXXX?
[00:10:34] Please help me out Samsung ao3 *#0*# not applying or working how to bypass google account??

InfinityBoxTalks 2022-08-01

[22:31:08] I changed it twice and both of them were original,100%,it could be the cpu,dont you think so?
[21:47:39] I changed the 100k resistor to a redmi note 10 pro, it turned on fine but the camera was gray
[21:09:22] I asked you, what\'s the initial problem with your device 😏
[20:36:09] translate.google.com helps for sure
[20:35:39] https://youtu.be/CvRHEbEQsds
[20:35:01] https://youtu.be/CPCk-Y53rz4
[20:34:38] Subscribe My Youtube Channel
[20:34:13] https://youtu.be/Jpn8WCmvoms
[20:30:18] thank you sir i will try again i hope i can solve it
[20:29:50] my only problem is i don\'t know english i can\'t do a proper transaction with translation
[20:28:28] read it again carefully and follow the instruction
any problem with you?
[20:27:58] Yeah
[20:27:23] have you checked my kink, dear debug user?
[20:26:58] Finally, my teacher, isn\'t the solution free, is it necessarily a paid solution?
[20:22:21] Reboot PC and try again.
also check SoC drivers and try with another cable and another USB port
[20:21:31] There are about 10 different servers with different services.
What server do you talk about?
[20:13:03] do it now
[20:12:48] use free repair method after debugger https://infinity-box.com/?r=100195
[20:12:30] https://forum.infinity-box.com/viewtopic.php?t=6535
[20:12:25] Sir, the computers that I have been using for years will only be used with a dongle, I did not know, if I had a mistake, it was unknowingly, I could not solve it with this link, help me
[20:12:23] info https://forum.infinity-box.com/viewtopic.php?t=6535
[20:10:21] This happened because you used crack or debug tools with Infinity.

use free repair method after debugger https://infinity-box.com/?r=100195
[20:09:43] restore original imei and see result
[20:06:58] I just got the car and I didn\'t do anything wrong. I have 2 PCs in my shop, I just wanted to use it on PC, that\'s all, I don\'t understand why this is happening.
[20:03:20] use free repair method after debugger https://infinity-box.com/?r=100195

first time it\'s free.
Your next debug or crack attepmt will be paid.
[20:02:22] What is the CPU type?
[20:00:53] Make this https://infinity-box.com/?r=100103
[19:59:36] Nothing found for x6816c

If you will get the file upload it to support with iosFileUploader

[19:50:40] 😎
[19:35:40] do you think this is the solution?
[19:34:02] Try to use another dongle,remove the 2cm Sim put it in another dongle and see how\'s going to be
[19:32:57] https://support.halabtech.com/index.php?a=downloads&b=file&id=542408&fbclid=IwAR3hnlehnjtKEoNUGD-QEE_EHn_cncmBhMls3aR5EXTWRT_Z1eyXJoEish4
[19:32:41] Format your system and download new cm2 medulla and install
[19:32:07] can sameone help
[19:31:40] This is SPD is easy to flash what exactly the problem?
[19:31:11] hi please help me
[19:30:55] Smart 6 ? The one of MTK or SPD x657 or x6511b
[19:20:51] same propleme dm-verity corruption
[19:15:09] Ohjxjhj
[18:49:07] Please I need assistance on how to flash x6511b smart 6 with cm2
[18:26:36] please someone help me now i have 2 pc in my shop i use only two of them but now i can\'t use them in any of them i haven\'t been able to solve the problem for days
[18:23:38] Pls help with this file x6816c
[18:23:13] Nothing found for M8424

If you will get the file upload it to support with iosFileUploader

[18:23:00] What is the problem?
[18:22:07] Perfect
[18:18:22] #CM2MT2 connection issue solution is HERE
[18:18:22] Card found : 303F1B34 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.29

Load IDBase v723487 Ok!

Update configuration ...
Load IDBase v723487 Ok!

Operation : Identify [ v2.29 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM129)
MODE : PRELOADER PORT
PORT : 129
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM
[18:16:20] Not yet. In progress
[18:16:00] Download and install Infinity CM2SP2 boot-pack https://infinity-box.com/?r=100186
[18:14:03] forget about data
[18:12:45] select another loader
[18:00:07] Vnus z85 prime
[17:34:42] what error?
[17:32:50] you replaced emmc. It means it was a reason for that.
I guess your \"new\" emmc also from old phone.

if you think it\'s sw fault you can make search here https://forum.gsmhosting.com/vbb/f641/
there are thousands of reports, software logs and examples there
[17:30:57] Found 6 files Infinix x572
1. Infinix_X572_H5312AD_N_190304V182
2. Infinix_X572_H5312AD_O_190425V181
3. Infinix_X572_H5312E_N_IN_190304V180
4. Infinix_X572_H5312CE_N_190304V100
5. [17:30:29] Any chances that best2 program damged?
[17:30:11] Nothing found for Infiniix x572

If you will get the file upload it to support with iosFileUploader

[17:29:49] No idea
[17:29:43] But i can reboot to system
[17:29:42] Hey
[17:29:24] chip may be partially damaged but not completely.
[17:29:13] No i mean my problem
[17:28:52] It\'s Infinity Data Explorer link and it was not for you
[17:28:51] I can reboot to system
[17:28:23] I cant do any thing about it?
[17:27:29] https://dl2.infinity-box.com/00/pub/?dir=software/
[17:27:11] Look these are written already!
[17:26:53] What is the firmware version?
[17:26:41] Nothing found for Vnus z85

If you will get the file upload it to support with iosFileUploader

[17:26:08] Ive programmed scatter it up now,but its so laggy,so,i want to flash it
[17:26:01] in most cases if flash can nt be written it says that emmc is faulty
[17:25:19] Emmc changed
[17:24:58] what is the problem with the phone?
[17:23:21] I tried 2 files same error
[17:22:30] Nokia 2.2
[17:22:28] Why?
[16:07:46] try to write pit as to re-partion
[15:52:19] Need Vnus z85 prime firmware
[15:32:51] Why do you need this 😏
[15:29:39] good evening group members links activation infinitybox dataexplorer
[14:56:04] a226b fix dm verity any help
[14:25:16] ???
[14:13:26] Hey admin
[14:12:59] Server on ✅💯👌🧑‍💻
[13:56:16] Pls how can I fix it with cm2
[13:55:48] Security plugin
[13:55:33] Itel p36 easybuy fix
[13:55:05] Pls help
[13:31:55] Yes
[12:31:52] Infiniix x572 nvram needed pls
[12:07:07] I\'need uk off
[12:02:33] I try is written error
[12:01:34] Reset userdata by cm2
[12:01:18] Qunlocktool use yes by cm2
[11:56:22] Uk .Okk
[11:33:25] Please I nee the solution
[11:33:21] Ok
[11:31:47] Is urgent
[11:31:42] Tecno KG5k frp boot file pls
[10:29:18] Ye
[10:19:01] As in network unlock?
[10:03:03] Good day everyone, Any news with Nokia C1 2nd Edition unlock
[09:55:41] Phone found!
Series 40 Device detected! [DCT4+]
read info... - Ok

Reading Phone Info....
SW ver : V 05.61 18-04-08 RM-298 (c) Nokia
IMEI : 359305024019515
PPM : V 05.61
18-04-08
RM-298
(c) Nokia
AG
CNT : Content: movi_es_white
V 05.61
18-04-08
RM-298
(c) Nokia


DSP Ver : 6w45.v48
PCode : 0562506
BPCode : 0554938
HWID : 6001
LCDVer : SUEZ
IMEI : 359305024019515
Sl Conf : 214-07-00000000000
Sl Prof : 800000000001000-B
Sl Aux : 000B5555

[09:52:30] Please
[09:51:02] Samsung note 10 network problem





Please 🥺 🥺 🥺 🥺





Help help help
[09:07:33] Need firmware for Movitel M8424
[09:07:19] Hi friend?
[08:36:46] Yes
[08:29:19] As in , what caused the repairs of security?
[08:28:19] Server active💯👨‍💻
[08:26:35] https://youtu.be/KeOb0n__Vy4
[08:10:03] Tecno ke5
[08:09:49] Hello please after repeir IMEI no sim card
[08:07:19] Hi guys I have itel p37 android 10 which is SPD. How can I remove the easybuy with CM2
[07:41:52] Is infinity saver Ok now?
[07:11:49] What\'s the problem?
[06:31:22] I once deleted. deleted a second time. is this the avengers group? again and ba
[06:26:36] https://m.youtube.com/watch?v=wMwEoyTSF4o
[06:26:06] https://m.youtube.com/watch?v=Ny_YGJKCzdU
[06:12:23] https://m.youtube.com/watch?v=wMwEoyTSF4o
[01:03:04] Help, sorry out of topic ..
why my phone if get received call , touchscreen error (touch all apps) .
how to fix it ? #Device Redmi Note 5a Prime
[00:36:38] Sorry Xperia is supported by cm2 frp????

InfinityBoxTalks 2022-07-31

[23:28:25] vnus z85 Prime need frimware
[23:28:04] vnus z85 need
[22:04:05] Alguna solución
[22:03:32] Tengo esta infinity pero no me reconoce ningún controlador que puedo hacer
[20:54:55] https://forum.infinity-box.com/viewtopic.php?t=3947
[20:06:32] Hi help me
[20:00:25] ??? phone infinix smart phone
[19:41:35] Found 11 files OALE
1. Oale_MT6580_OALE_CC1_6.0_L1_OALE_CC1_V1.0.1_20200220_MRA58K_CC1
2. Oale_Oale_X2_OL_P200_OALE_YT_V007_20180627
3. Oale_Oale_X1_OL_P100_OALE_YT_V008_20180913
4. Oale_NVM_OALE_X1_MT6580_S00_MOLY_WR8_W1449_MD_WG_MP
[19:27:57] hello memebers i need this firmware
OALE CC5
MTK mt6580
Boot done! Patch Level : MRA58K Display ID : L7S_OALE_CC5_DC_V1.0.1_20211101 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-09-05 Build Time : 01.11.2021 Product Model : CC5 Product Brand : OALE Product Name : CC5 Product Device : CC5 Product Manfct : OALE Board Platform : mt6580 Product Info : CC5
[17:00:33] 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.201005.001 V1.350_B01 release-keys
Platform Version: MOCORTM_20A_W21.15.3_P13_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_20A_W21.15.3_P13
HW Version
[16:59:27] Im connected to internet
Logged in my infinity Account with 5 remaining credit balance
Put username and password intho SP2

But i get error
[16:40:06] vnus zeus z81 spg need firmware
[16:31:39] I wanna Unlock Nokia C20 i get this error
[16:24:59] Any error?
[16:24:35] Yes
[16:24:24] Try to identify any error shown?
[16:23:08] Cm2 ??
[16:17:01] Plis help
[16:12:00] Help Server off
[16:11:57] Since 3 hrs ago..
[16:09:53] Please, help for flash nokia TA 1352
[16:09:24] Even after connect to VPN but always failed... 😭
I think is server issues
[16:07:51] Card found : 1C1E1BD9 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Safaricom : Neon-Ray-Pro
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...

[16:06:33] Tomorrow will be available?
[16:02:43] Server off-line please conectam
[16:02:34] Have network and user & password is correct
[16:02:10] 🤔 server down for few moments
[16:01:00] Can\'t connect server on cm2 spd. Please help
[16:00:40] Wait, try to click on identify, be calm a little, without connecting device see what it shows
[16:00:29] Hi brothers
[15:48:37] BROM init passed! Stuck
[15:48:20] Ta 1270 (mtk device) can\'t connect in BROM mode
[15:41:15] Cm2 team please solve my problem
[15:38:46] ???
[15:08:51] +86......
[15:06:27] Region?
[14:55:48] Operation : SP Unlock [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Safaricom : Neon-Ray-Pro
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMM
[14:54:27] Error while i unlock Neon ray Pro
[14:52:12] Redmi 4x
[14:51:33] model brooo
[14:48:29] Redmi account Unlocked with cm2 but relocked after internet connection.
[14:26:27] Nothing found for Tecno Bd2d

If you will get the file upload it to support with iosFileUploader

[14:22:07] I need help for this solution
[14:21:46] What you mean
[14:21:25] What you mean
[14:20:00] You are sharing cm2;
[14:18:03] Server Off?
[14:11:23] https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=645530
[14:09:42] need this file plz
[14:09:34] https://support.halabtech.com/index.php?a=downloads&b=file&id=645530
[14:03:05] Ta 1270 error connect in BROM init passed!
[13:52:35] Is redmi m21061119AG firmwar
[13:42:16] Yes solution available
[13:37:28] Server off Why??
[13:37:01] No entiendo😔 puedes decirme mas breve acabo de comprar esta herramienta 😅
[13:19:01] Admin is server fixed for network unlocking???
[13:04:24] untick auto EMI in Setting
[13:04:24] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 726DEB02443EE200A93D88185D209105
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BRO
[13:04:22] redmi 9a read info ok but flashing faield
[11:55:29] PLEASE HELP. BOOT FILE TO REMOVE FRP ON THIS TECNO CAMON 18 PRO
[11:30:11] OPPO CPH1725 hard reset solution anyone
[11:19:09] Might be server down
[10:56:37] Mybe serve have issues
[10:56:27] Me too same can\'t unlock server error
[09:29:03] Ok
[09:21:35] Then try to restart your pc
[09:18:45] Internet está conectada
[09:03:56] Help
[09:02:44] Pc on-line brother
[09:01:44] Connect pc to net bro
[09:01:24] Connect device with pc bro
[07:29:20] problem solve by ABDULWASII\'
[07:26:45] download and install nokia flash drivers,

Then when flashing
run
1, software
2, plug usb
3, insert battery
4, tap power button

nb all step be in less than 4seconds
[07:25:05] https://nokia-connectivity-cable-driver.en.uptodown.com/windows/download
[07:24:42] thx boss live solution working
[07:18:39] Ooo this , you only need to download Nokia Connectivity Driver bro, search on chrome
[07:15:15] Not this device pics I said
[07:11:11] Snap and send device pics
[07:10:22] one-core Processor
[07:03:45] Bro download driver according to your device chipset no driver is developed for a single device rather its developed for different device of same chipset, so if your device is mtk download mtk drivers, if spd download spd drivers, if Qualcomm download Qualcomm drivers and many more
[07:01:59] Just download at support bro, turn off anti virus, then continue with installation, if posible after installed put all path to antivirus exclusion list👌
[06:59:14] 🙅
[06:58:34] c1-01 driver for windows 10 need
[06:40:43] https://m.youtube.com/watch?v=Ny_YGJKCzdU
[06:38:56] Yes server active, service available
[06:38:01] What results to no service
[06:37:23] ❌
[06:14:14] Thanks I finished I copy file on another device
[05:56:16] Sony Xperia L1 frp help me
[05:45:57] Imei repair
[05:19:41] To do what job?
[05:02:37] 👆👆👆👆
[04:59:42] Samsung A12 no service solution please
[03:47:01] I think my CM2MT2 has expired. How much for one year renewal??
[03:46:13] 🙃🙃🙃😂🙃🙃😂😂😂😉😂
[03:43:22] 👆👆
[03:16:26] Samsung a2core a26of is it supported cm2???
[02:54:40] So to login forum what must use infinity login?
[02:53:50] Ok
[02:32:08] Help
[02:31:32] I am ready conected to network
[01:11:42] How to use forum I don\'t know my password & username
[00:46:39] Connect to internet
[00:37:03] Cual es el problema con ese?
[00:36:30] Español
[00:09:37] oppo PACM00 remove lock screen solution plz

InfinityBoxTalks 2022-07-30

[22:00:12] P661w
[21:56:25] Will do
[21:56:04] Okay
[21:53:56] ??
[21:53:20] Sp2
[21:53:12] Sélect Sc9863A
[21:49:56] I need P661w not A661w
[21:26:51] Not all model supported
[21:25:12] What operation do you want to perform?
[21:14:09] no my brother
[20:58:53] help give you Id huawei p30 pro
[20:17:19] Admin,,,,is high time you do something about this kind of people
[20:16:21] It is a massive fail after actualization
[20:15:20] It\'s ok without simdcard but when I put sim it restart
[20:13:10] Here before i asked ,i thank already some one did it ,But i didn\'t get full info ,When credit end all function will not work right ?
[20:07:04] is that a question?
[19:50:21] Support infinity Cm2 Ast modul
Nokia 1.4 rest
[18:05:18] Infinity Team must Throw out this kind of Garbage,They don\'t have sense how to behave in Professional group where people comes in search of Bread And Butter
[17:22:30] Join me and get free $RLY crypto tokens when you install Solitaire Blitz and play with my referral code LoyalYawningKiwi2.
https://sltr.app/0YAdT383?LoyalYawningKiwi2
[16:28:09] oppo cph2185 hard reset solution .
[16:22:06] ok thanks i will try
[16:21:46] untick auto EMI in Setting
[16:21:46] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM34)
MODE : BOOTROM
PORT : 34
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : B76F4199F895CD952FBA35BABEFC3062
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
B
[16:21:44] redmi 9a plz help
[15:36:46] Please help me 🙏🙏🙏🙏🙏🙏🙏
[15:32:23] I have dhru fusion script and serial key ( but someone used it )

Who can decrypt icon cube and install it to my domain and host
[15:23:48] What things needed before installation in window 10 ?
[15:23:05] Thank you @keine_frau_bot i would like to know how can i install cm2 for first time ?
[14:32:10] Found 13 files BE6
1. Xiaomi_Mi_6_sagit_global_images_V10.0.1.0.OCAMIFH_20180905.0000.00_8.0_global_7ce4be65b4
2. RM_1019_01068.00023.14295.43001_059W353_6BE66BC4_CustomerNvi_01068.00023.14295.43001_10022_7b0496a925c1d8a35f9554763f6eaa4c.nvi
3. RM_1019_01068.00016.14295.38001_059W6V6_D6A6694D_Custom
[14:12:15] Cm2 Support flexihub?
[13:16:12] Itel L6501 try to unlock user code showing this problem
[12:51:54] 👆👆👆👆👆👆
[12:09:53] Cm2 is supported repairing Samsung imei number?????
[11:37:20] Where I my going to type it
[11:26:51] Shift+ f10

Type Diskpart enter

Type List Disk enter

Type Select Disk 0 enter

Type Clean enter

Type Convert GPT enter

exit enter
[11:23:26] Solution please 🙏
[11:14:04] Found 3 files kg5
1. recent_Tecno_Spark_Go_2022_KG5m_MT6761_11_KG5m_H6125C_RGo_OP_211206V257_HiOSv7.6.0_OS7.6_R_P74_210222
2. Tecno_KG5k_F062_11.0_GL_V034_20220214
3. Tecno_KG5_H6125AB_RGo_GL_211101V341

[11:12:25] Like the new 68 series mtk processors are not supported yet and test points are necessary for some phones nd most of the customers don\'t like their back cover removed coz many of them are like pasted nd stuff
[11:06:24] I need solution on Nokia ta 1359, it keeps rebooting when connected with cm2
[11:05:28] Greetings team
[10:56:22] nokia TA-1076
[10:55:59] Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : MEID : 1347C836FAB79EB92890C306DC3BD5A7
BROM : SecLevel : 0x00000001
BROM : SecMode :
[09:46:57] we couldn\'t solve it this way, can you help me please
[09:41:37] Hello thanks for answare, I have post model and log
[09:38:03] I was sorted, thanks
[09:21:03] Yes
[09:13:53] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Cont
[08:48:49] qualcomm
[08:29:09] If you download all files in one folder 📂 pls use 7zip not rar
[08:28:35] Can Nokia C30 be unlocked the network?
[08:27:51] https://www.mediafire.com/folder/26db7w9eaqx67/ITEL_MOBILE_LIMITED
[08:27:51] ITEL all boot, loader and fg files no password free download
[08:19:19] Itel P661w boot file
[08:06:33] Hello divice need unlock not flash
[08:05:12] https://www.google.com/search?q=0x000007b+error
[08:04:39] post sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[08:04:20] try and see
[08:04:04] you forgot your username or password.
you can reset it here https://infinity-box.com/service/
[08:03:23] register at support forum and post sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[08:02:55] Nothing found for a551l

If you will get the file upload it to support with iosFileUploader

[08:02:40] Ok
[08:02:22] Nothing found for X6819

If you will get the file upload it to support with iosFileUploader

[08:02:09] you must select another loader or model from list
[08:01:45] What is it?
[08:01:25] We do not provide this kind of services at the moment
[08:00:37] what function do you need?
[08:00:07] Registration code: A97GRP
[07:59:45] Registration code: A97GRP
[07:57:55] use free repair method after debugger https://infinity-box.com/?r=100195
[07:57:27] What is the username?
[07:57:09] Mi Account info https://forum.infinity-box.com/viewtopic.php?t=3947
[07:56:48] What is the model name?
[07:56:31] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[07:56:17] https://infinity-box.com
[07:56:03] What is the CPU type?
[07:55:41] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[07:55:24] you must install spd/unisoc drivers and reboot PC after that!

see SoC drivers here https://infinity-box.com/support/
[07:54:29] You may try to flash it with another firmware.
Also do not forget that stuck-on-bootlogo\" may says that EMMC chip is damaged (hardware fault)
[07:53:28] Do not use USB HUB.
Try to use another USB cable, use short cable.
Try another USB port
Use USB3 port (blue color) if available
Be sure you have SoC drivers installed!!!!
[07:52:32] see reports and models here https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/

CM2 has AUTO-DETECT features so you don\'t need to have model in list to get it done. Even unknown models are supported.
[07:51:28] No problem friend, I can repeat one more time:
Download and install Infinity CM2SP2 boot-pack https://infinity-box.com/?r=100186
[07:50:52] #CM2MT2 boot issues manual https://infinity-box.com/?r=100189
[07:50:29] Don\'t spam everywhere but simply read once answer given by supporters!
[07:49:39] Download and install Infinity CM2SP2 boot-pack https://infinity-box.com/?r=100186
[07:49:21] you must select another model or use built-in loader
[07:48:44] post sw log and result here
[07:48:30] try your phone and see result, it\'s best way to check latest models
[07:48:00] Do not use USB HUB.
Try to use another USB cable, use short cable.
Try another USB port
Use USB3 port (blue color) if available
[07:47:27] in progress
[07:47:14] Found 8 files tecno s1
1. Tecno_S1SPro_H8016C1_M_KESF_170330V50
2. Tecno_TECNO_S1_6.0_S1S_H8016D_M_KESF_170606V50_MRA58K_rlk6580_weg_m
3. Tecno_MT6580_TECNO_Orange_Rise32_6.0_ORA_V097_SKU1_20170913_S1_K1_M_MRA58K_rlk6580_weg_m
4. Tec
[07:47:03] As you know it\'s little bit hard.
I do not want to explain how it works but you can ask somebody here privately
[07:46:53] Firmware for tecno s1 any link for download
[07:46:09] if file is not found at server you should use google.
More files comes to server soon
[07:45:23] use free repair method after debugger https://infinity-box.com/?r=100195
[07:45:13] use free repair method after debugger https://infinity-box.com/?r=100195
[07:44:38] Found 1 file A661w
1. DA_SPD_USC_iTel_iTel_A58_A661W.fdl

[07:44:16] Found 5 files Itel A58
1. iTel_S11_I801_6.0_V065_170907_MRA58K_S11
2. iTel_S11_I801_6.0_V070_180420_MRA58K_S11
3. iTel_S11_I801_6.0_V043_161110_MRA58K_S11
4. Oukitel_MT6735M_OUKITEL_K6000_6.0_OUKITEL_K6000_V09_20171117_MRA58K_t875a_o
[07:43:49] Please post sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[07:43:21] Try to flash or reset it.
post sw log text
[07:42:56] As a first step you must install unisoc drivers and reboot pc after that

after that try with FLASH mode but not DIAG
see here https://forum.infinity-box.com/viewtopic.php?t=5629
[07:40:12] see dongle price at top of this page https://infinity-box.com/price/
[07:39:41] Download and install Infinity CM2SP2 boot-pack https://infinity-box.com/?r=100186
[07:38:16] What is your dongle S/N and What is your Username?
[07:36:58] reboot PC
install SoC drivers
also you may check where is the problem with this tool https://www.nirsoft.net/utils/blue_screen_view.html

result?
[07:36:07] Hi,
What do you mean \"slow\"?
[07:35:17] Hi,
It may be result of recent Windows Update or something like that.
Check it https://www.google.com/search?q=0x0c000007b
[07:17:33] Select correct loader for
[07:17:06] How to fix
[07:10:59] Ok
[07:10:25] Scan pc bro, turn off anti virus, redownload exe from server, then retry
[07:05:49] Help
[06:30:40] already installed dear
[06:30:38] No
[06:29:51] Yea
[06:25:43] this driver ??
[06:23:10] okay
[06:21:40] Uninstall and delete dvlevuce path then reinstall
[06:21:10] Cm2 server
[06:17:41] Bro I have done it but still the same
[06:11:41] download in Google chrome??
[06:05:05] My internet speed is ok
[06:04:08] Why are downloads from flashfiles so slow
[06:03:52] This is cm2 platform bro not chimera
[06:03:25] Install SoC driver and try bro
[06:03:11] Eror
[06:03:06] Does it enter fastboot?
[06:02:00] we installed cm2 MTK2 libusb driver after blue 🔵 screen problem 😞 Help
[05:58:57] I think the security is updated, the phone is detected on system when power on
[05:57:24] Why!!!
[05:57:06] Device state before writing FW?
[05:56:30] Use correct loader I mean bro
[05:55:44] Not connecting to cm2
[05:55:17] Region?
[05:55:04] Launch cm2sp2, execute action then connect device
[05:54:43] Launch cm2mt2 bro, execute action then connect device
[05:54:02] Device state before Flashing?
[05:53:11] Access Denied!!
[05:52:31] Send logs here br9
[05:51:53] Yes, solution available
[05:51:29] ❌
[05:51:05] Remote service ON for this
[05:50:41] Samsung?
[05:50:00] Try HMD SERVICE BRO IF NOT WITH CM2 , SERVICE AVAILABLE
[05:49:29] Yea sure💯👌✅
[05:49:01] Already but i think phone is dead
[05:48:42] HMD SERVICE BRO, SERVICE AVAILABLE
[05:48:11] Select correct loader for your device bro
[05:47:39] ???
[05:46:58] Device state before flash?
[05:43:57] Check www.infinity-box.com for more details
[05:43:16] No device found bro, check
1. Drivers
2. Your device port
3. USB cable
4. System usb port
[05:41:25] 🤔
[05:41:08] Try this, Remove smart card and trying plug in to another port then retry
[04:22:43] but imei still 000000
[04:22:34] i have nvram to fix
not registred on network ill uplad it 😊
[02:55:47] Sorry I do not have Zx3 at the moment
[02:54:34] Meaning???
[02:41:22] PLEASE KINDLY ASSIST ME WITH ITEL P651W FDL FILE
[01:31:23] i have put the known username and password on
[01:19:42] === DongleManager [Infinity] v1.90 [7/30/2022 2:16:56 AM] ===
Searching...
Smart-Card can\'t be found:
Card with specified AID is not found
[01:19:31] pls how do i fix this issue on my dongle?
[01:11:46] Reset password or e-mail HERE\r
\r
Apply username and password this way
[01:11:46] Card found : F7EB3950 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : iTel : P651W
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol se
[01:09:39] pls i need itel p651w fdl file
[01:02:46] Permanent bro

InfinityBoxTalks 2022-07-29

[23:30:55] Help pls
How to remove privacy password on SPD phones
[23:01:53] Cm2mtk for frp unlock
[23:00:40] How much is the tools
[22:23:46] TO UNBRICK THE DEVICE
[22:23:39] can i get help pls
with Infinix HOT 11S
SPD FIRMWARE
[22:17:13] Android version,?
[22:13:59] Connect wifi
[22:03:37] Any help ?
[21:46:56] https://youtu.be/xm86J_4KI24
[21:44:43] Temporary or permanent?
[21:43:42] Model and fault?
[21:42:07] Try cm2scr bro
[21:41:39] Permanent or temporary,?
[21:41:08] https://youtu.be/xm86J_4KI24
[21:38:20] Problem b4 Flashing?
[21:37:19] Ask for code?
[21:37:03] vivo v23e 5g frp cm2 faild🥺
[21:36:40] Wait let Admin intervene
[21:36:00] HMD SERVICE BRO
[21:35:25] Found 4 files itel 1703
1. iTel_A23R_081_2001_170321
2. iTel_IT1703_V606B_20180412
3. iTel_it2110_G182_SwEnFrPoHa_TZ_TIGO_20170317
4. iTel_IT1409_C219E_20170320

[21:33:50] Bro try using z3x not supported here
[21:32:41] Install latest cm2sp2 bootpack bro and select corresponding loader with your device
[21:28:13] Uninstall software bro, rescan pc , then install, turn off anti virus, launch exe b
[21:27:16] Nothing found for infinix X6819

If you will get the file upload it to support with iosFileUploader

[21:26:47] Nothing found for X6819

If you will get the file upload it to support with iosFileUploader

[20:59:59] Hope you select correct loader for your device
[20:59:35] Nothing found for itel A551l

If you will get the file upload it to support with iosFileUploader

[20:58:58] Check
1. Device port
2. USB cable
3. System usb port and try again
[20:57:06] No bro HMD service
[20:55:31] Chipset?
[20:54:33] Found 5 files Itel A58
1. iTel_S11_I801_6.0_V065_170907_MRA58K_S11
2. iTel_S11_I801_6.0_V070_180420_MRA58K_S11
3. iTel_S11_I801_6.0_V043_161110_MRA58K_S11
4. Oukitel_MT6735M_OUKITEL_K6000_6.0_OUKITEL_K6000_V09_20171117_MRA58K_t875a_o
[20:54:13] Yes solution available
[20:49:44] Itel A58 flash file help
[20:48:19] Use built in loader bro
[20:47:32] Itel A661w flash file not in support
[20:38:43] Anyone help on how to root a135f u1
a135fxxu1avd4 root
[19:28:02] dear admin friends can you help me please i can\'t use it for 2 days
[19:25:27] I never believed in online investment thing not until I invested in this company recommended by my friend, with just a small amount and I received a profit that change my life in less than a day of trading and I\'ll like to share the link below
Doubt kills so I encourage you to give it a try.
👇👇👇👇

https://t.me/joinchat/zway5Xq-6iI3ODc0
https://t.me/joinchat/zway5Xq-6iI3ODc0
[19:17:38] No I don\'t know how to go about it
[19:12:02] Available..........10000000000%%%%%%
[19:09:02] But Nokia It can come with a difficult job now please CM2 team help coz some we can not get HMD service
[19:08:40] How to hard reset note 20 ultra
[19:05:34] 🙏Please and more not only c10 and c20 add also c1 2nd go edition
[19:04:15] Only Reset now
[19:03:55] Or admin should add in cm2 some features
[19:03:40] Hmd 😎
[19:03:22] Isp
[19:03:03] Now how to reset it without diag?
[18:51:09] Guys please help. Error : failed to setup HS_USB port
[18:51:09] Guys ple
[18:50:08] How to change it?
[18:36:04] Yes did already
[18:32:13] c10 and c20 latest security blocks diag mode for reset/unlock
[18:31:45] Gys is it true dat nokia are nw closing diag mode
[17:32:48] Hi guys I have tecno android 11,spd easy buy......who can help me
[17:04:42] Only online service if you’re in south Africa inbox me
[16:16:04] Can you help
[16:15:57] Or Factory reset
[16:14:43] Nokia c1 2nd edition frp
[16:13:36] Help me tecno BD2 fail to write firmware
[16:09:07] Itel p661w boot file please help
[16:04:41] I tried this method again and again but not work
[16:01:31] redmi 9a china
[15:59:03] === DongleManager [Infinity] v1.91 [7/29/2022 6:45:37 PM] ===
Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Card-Reader: Generic USB Smart Card Reader 1
HWID: 00000E4B1CC74082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): EA1B0E4B
Firmware version: 0150.02
=== Started: 7/29/2022 6:45:38 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticati
[15:57:25] Pls help today I renew 2 year activation but my cm2 seems damaged I deleted fault.bin file here is the log
[15:57:00] Please help
[15:47:39] Operation : SP Unlock [ v2.03 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E1
BROM : SecMode : SBC+ARB
BROM : BOOTROM
MODE : Wiko : SEC_6739 | Manual : Disabled

[15:47:38] hello who can help solve this pb
[15:41:42] It\'s mean the selected base doesn\'t contain the required or correct DA file that should be Downloaded to your device. So find correct DA or Loader to do Job
[15:35:18] Please i need itel p661w fg boot file.
[15:28:42] Nothing better than Cm2...Cm2:Rocks
[15:27:29] Tell me best flash box in addition to cm2.
[15:26:35] Can cm2 support all china mobile?
[15:11:45] Try to download latest SPD after that log in your username and password under setting
[14:56:54] Always bringing this error
[14:06:05] here\'s a log of Hot 11S PLS TEAM
peration : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent
[14:03:33] or is there a way unbrick all this fake cloned infinix phones without using there firmware pls because phone flash or reset sucessfully but still doesn\'t boot to screen
[14:02:19] how can i get infinix hot10 spd clone firmware and infinix hot 11s clone firmware pls
[14:01:46] Hello friends
[14:00:14] ca we unlock nokia c01 plus jio sim india
[13:41:09] Use saver
[13:37:56] Is cm2 supported Samsung rooted network??? Or patch network???
[13:23:44] I keep having this issue pls what is the solution
[13:05:35] Park well
[13:01:09] 🙏Thanks the solution worked
[12:11:31] I do not understand this is what displays on my screen when I do the frp of techno CG6 camon17
[12:02:55] Don\'t you see that you don\'t connect your system to server you need to connect your system then try to put your username and password into your SPD under setting
[11:59:10] 👌
[11:58:35] Not take too much time it depends on your network
[11:58:02] Remove what?
[11:55:58] You forget that here\'s cm2 group not unlock group you should try to ask whoever using it to teach you how to do it this group is for cm2 ok
[11:55:48] ??
[11:54:24] Admin
[11:49:27] How to Unlock OT 6045i
[11:35:20] Any solution Redmi note 9s mi account remove
It always stop here in unlock tool..
Solution please
[11:33:47] Hello good day....
Any solution for Redmi note 9S mi account remove
[11:15:33] Device model
[11:04:57] #CM2MT2 connection issue solution is HERE
[11:04:56] Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2B522586ECBB8FDBC6FE4002
[09:20:19] Server unlock?
[09:17:58] Redmi 9c mi account solution ???
[09:07:47] admin am reparing imei for vendor designed fones-nokia ta 1359 its been now 1hr and job has not been done. am really waiting for job to be completed
[08:53:29] Nokia 1359 Nokia factory reset with cm2
[08:23:35] How please??
[08:23:15] Nothing
[08:17:19] How please
[08:14:15] Tap on the sim info to see if is patch or network unlock
[08:13:36] After this code what is the next please
[08:12:45] change file sir
[08:10:55] Admin
[08:08:39] help
[08:00:40] yes
[07:47:49] can you help from other pc you can\'t use 2
[07:46:38] MOBICEL v4 After flashing done but still on and off
[07:32:40] Nokia c20
[07:25:17] Model
[07:22:47] 🙏
[07:20:52] I want to unlock netwok
[07:20:46] kindly someone help to configure my dongle on 2spd2 network unlock i have never been successful since,always i have been facing the same error even if changing my account credentials.
[07:20:37] Nokia c20 cant go diag mode any solution please
[07:20:08] 1. Use FLASH MODE but not DIAG\r
2. Install latest SoC drivers UNISOC | UMS9117 | SPD\r
\r
You must check 1. and 2. ten times before read 3.\r
3. It may be seriously damaged phone (that is not supported yet)
[07:20:08] kindly someone help to configure my dongle on 2spd2 network unlock i have never been successful since,always i have been facing the same error even if changing my account credentials.
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SV
[07:10:13] Flash file
[07:09:53] Itel 1703 firmware
[07:09:43] Found 1 file MOBICEL v4
1. Mobicel_SP7731E_Mobicel_V4_8.1.0_OPM2.171019.012_y400

[06:58:06] How long does it take to register on infinity forum
[06:17:01] If skp then?
[06:14:21] Confirmation code
[06:13:49] Spd via diag or reset by hand
[06:05:08] Snap and sent to me let me see something
[06:04:49] Then tap on the sim information
[06:04:16] Dial this code *#0011#
[05:55:13] New update when?
[05:37:27] Patch network, need root
[05:22:02] 👆👆👆👆
[05:10:38] np have nv file
[04:52:30] Pls how to download files
[04:11:23] [In reply to Ramsey Everyday]
DongleManager has DEFAULT FACTORY password.
You must use the same password as for your Infinity Account.

Reset password here https://infinity-box.com/service/
[04:11:00] original backup you can restore but repair not supported
[04:10:30] restore onoy not repair ?
[04:10:08] contact any web developer
[04:09:58] not supportexd
[04:08:32] I need own website
[03:49:42] imei 0000
realme c11 2021 soc9863a
after flashing
[03:31:06] Not corret
[03:29:39] Cm2 support nokia c20
Username & 5 crédit

InfinityBoxTalks 2022-07-28

[23:19:31] Help please Samsung a2core not take any network not any signal sim call how do I fix it?????
[22:29:28] እምነት እምነት ትግራዋይነት ክቡር መንነት ኢትዮጵያዊነት ክቡር ዜግነት
https://youtube.com/watch?v=0NlVGeN5iYo&feature=share
[20:55:54] anyone can help
[20:55:46] need restore original imei
REALME C11 2021 SOC98630A
[20:46:18] Itel 1703
[20:45:38] Please which boot can I use to remove Frp from item 1703
[20:32:26] Done after research
[20:31:30] How to deal with firmware on this board
[20:10:30] No solution on this?
[19:44:51] Da or Emmc
[19:42:31] infinix X6819 firmware needed?
[18:37:57] Understood. I\'ve checked. Is there any way, at least, to get the partition encrypted, I mean, read user data partition encrypted. Thanks.
[18:27:26] Unbrick firmware link pls
[18:20:16] use unbrick file
[18:17:31] Use test point
[18:06:12] Redmi note 9 merlin after flas blank disply no recovey and fastboot mode
[18:03:04] yes
[17:59:50] Hi..
Please Team add oppo realme imei repair. Please
[17:57:53] Sir please oppo realme spd imei repair
[17:56:42] Please, i need firmware Autopatch for samsung A32. SM-A326B.
[17:56:08] Anyone please
[17:10:25] Bro itel a551l pro flash file spd .... Please
[16:21:13] Itel P681L refuse to flash
[16:20:17] Spd phone not working on my cm2 what could be the problem
[15:40:19] Error on nokia C20 network unlock login details error but lm using correct details
[15:39:27] Is nokia ta-1380 supported for erase password/pattern?
[15:17:26] Hello,does zte p651 unlock supported?
[15:12:37] Somebody help me with this please
[15:08:18] Nothing found for MT6765__HMD_Global__00WW__11__00WW_2_180__RP1A.200 720.011__WVR_sprou NOKIA 1274

If you will get the file upload it to support with iosFileUploader

Channel - Group Chat
[15:08:18] Nerf triste flash fille please
[15:00:09] cm2 errors what is it?
[14:55:06] Solution please
[13:44:42] Tap emergency and dial (*#0*#] for adb
[13:40:20] Good afternoon people, can help me, remover frp de samsung M11 android 11
[13:38:47] nvram for tecno k8 needed plz
[13:34:28] model?
[13:27:35] Thanks
[13:27:30] Hello everyone, i need da and secure boot for realme 6
[13:18:12] Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FULL FACTORY ( FORCED + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BR
[13:10:14] Network
[12:56:43] Use miracle latest version
[12:49:49] Try this
Close exe
Turn off anti virus
Download and Install Driver_mtk from support
Launch exe , then test.
[12:18:04] Found 7 files tecno CA8
1. Tecno_CA8_H633EFG_O_200229V272
2. Tecno_CA8_H633EFG_O_V2_200301V250
3. Tecno_MT6763_TECNO_MOBILE_LIMITED_TECNO_CA8_8.1.0_CA8_H633EFG_O_190325V237_O11019_TECNO_CA8
4. Tecno_CA8_H633EFG_O_200616V276
5.
[12:13:01] Please help
[11:44:39] excuse me a lot for the french
[11:39:13] English please
[11:37:53] Quel modèle
[11:37:19] Quel modèle
[11:36:59] What is issue in handset?
[11:35:14] Error
[11:28:43] also group is related to Infinity
[11:28:24] English please
[11:28:09] سلام
A226b u4
چنچ میشه با z3x?
[10:34:08] dunns at1001 firmware v5.1 download needed
[10:04:20] PLEASE HELP ME WITH TECNO CA8 FIRMWARE.
[09:50:16] I noticed this issue started after I updated to the latest infinity Cm2mtk2 boot pack. The phone is an infinix smart 5 x650.
I literally have been doing same job with the tool before I updated it. Now it\'s showing me error.
[09:48:19] Please any help concerning the Error : Fail to init control.
>>>check USB drivers, restart software
[09:33:19] all what you need
Admins do not open images here.
so if you want to get answer from admin you must describe your problem with words and letters but not with selfies

if you want to get help from other users you can post all what you want
[09:32:15] What do I need to write in the text?
[09:29:49] another way: make a detailed description of the problem at support forum
put log files and all info to one thread
[09:29:48] Thanks
[09:29:45] OK
[09:29:08] return it bck
[09:29:07] I need to correct the production numbers and to have a signal
[09:28:56] if you want to send more than two lines of text I suggest you to use support forum
[09:28:41] It came to me without a name and serial number, and the owner flashed and formatted it. There is no backup
[09:27:50] Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM17)
MODE : BOOTROM
PORT : 17
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 9B93CE7A16D93CF72F57B1590758237E
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 15F23474F4674087F78FD155EB0A8E344578087F7E61D03427
[09:27:34] What is the problem with it?
[09:26:30] here
[09:26:22] Where can I send the text?
[09:24:04] write text
[09:23:57] Nokia TA-1334
[09:23:47] Model
[09:23:41] reboot PC
try to use another USB port
try to select another loader
[09:23:05] Imei OK,serial number OK. signal not ready
[09:22:21] and the solution?
[09:22:20] Proinfo write serial number restore OK
[09:21:11] Nokia TA-1334 serial number repair backup write files? Which one is it in?
[09:17:38] ?
[09:14:55] Change to third platform bro and test
[09:14:05] Usb share tool...(fault.bin)
[09:13:26] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM63)
MODE : BOOTROM
PORT : 63
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2B6D599A944BECC96281DF8472E79612
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM
[09:13:00] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM63)
MODE : BOOTROM
PORT : 63
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2B6D599A944BECC96281DF8472E79612
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM
[09:10:32] what\'s the problem
[09:10:12] Hello guys please help, I\'ve been stuck here.



Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : C9362E9F1AC67972CFF66909BD815F39
B
[09:05:39] failed any help team ?
[09:04:37] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM63)
MODE : BOOTROM
PORT : 63
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2B6D599A944BECC96281DF8472E79612
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM
[09:03:53] Backup write Oem?
[08:58:01] write OTP?
[08:57:46] Repair serial number nokia TA-1334?
[08:52:49] Mi Account info https://forum.infinity-box.com/viewtopic.php?t=3947
[08:52:29] Click here @FlashFileSearchBot and type there phone name. You will get links
[08:51:28] Any type of Mi account
[08:50:41] Pls which box can unlock Mi account
[08:49:44] So i gave it like that
[08:49:37] I force update nvram imei appeared...
[08:32:12] Found 9 files a16plus
1. iTel_MT6580_ITELA16PLUS_A510W_A332_11_OP_V012_20220215_RP1A.200720.011_A332
2. iTel_A16Plus_SA332RU_8.1_RU_V015_20210302
3. iTel_A16Plus_SA332Q_10_OP_V012_20210602
4. iTel_A16Plus_SA332Q_10_OP_V009_20210313 [08:14:20] you got an info already
do you need text again:
[08:13:40] everything is okay
[08:13:34] Reset password or e-mail HERE\r
\r
Apply username and password this way
[08:13:34] MODEM TAG : MOCORTM_20A_W21.15.3_P17_Debug_4G_MODEM_20A_W21.15.3_P17_sc9863A_modem_sharkl3_pub

NVMng : SecurityInfo
IMEI[1] : 356748978649980
IMEI[2] : 356748978649998
WIFIMAC : 44917C1F8039
BT_MAC : 44917C1F8038
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authentication error:05 authentication failed

>>> Error : Operation fail!
>>> Check your login/passowrd details!

Reconnect Power/Cable!
[08:13:08] boss check
[08:06:56] yes, it looks like flashed well
[08:06:29] it meand userdata area is encrypted with FDE
[08:05:52] What is the problem?
Where is sw log text?
[08:05:29] Where is sw log text?
[08:05:01] What is the problem?
post text
[08:04:44] Very estimated price is here https://infinity-box.com/price/

Ask any seller https://infinity-box.com/buy/
[08:04:06] What is the problem?
Where is sw log text?
[08:03:43] be sure you have SoC drivers installed well.
also reboot PC
check battery voltage
[08:02:30] What is the problem?
[08:02:14] What is the model name?
[08:02:02] many things, depends on model
[08:01:22] log text?
[08:01:07] Found 13 files tecno kd7
1. Tecno_KD7h_H6210CDEH_Q_GL_210901V501
2. Tecno_KD7h_H6210CDEH_Q_GL_210520V445
3. Tecno_KD7_H6211FQRSTU_Q_GL_210313V382
4. Tecno_KD7h_H6210CDEH_Q_GL_211101V534
5. [08:00:53] you must use FLASH mode
https://forum.infinity-box.com/viewtopic.php?t=5629
[08:00:23] restore original nvm or restore back original imei
[07:59:53] Hi,
As I know you are experienced engineer and you know well that phones may have different security types.
Have you checked frooum thread with list of models and info about price per different model?
Let me know if you need a link to that info, I will make a forum search for you.
[07:56:48] try with CM2SP2.exe and post sw log text
[07:55:30] Nothing found for BONTEL Q10

If you will get the file upload it to support with iosFileUploader

[07:55:12] Please check wikipedia about FDE, there is an explanation about it
[07:54:01] Make this https://infinity-box.com/?r=100155
[07:53:45] you mjst use search
[07:53:12] Here is Infinity group
[07:52:25] Here is Infinity group.
other products adbvertizing gives you permanent ban next time.
Good luck!
[07:51:22] each phone has own structure
If you want to get info I suggest you make search at support forum first
and in case of problems post sw log text there
[07:49:43] What do you want to unlock?
[07:49:20] Very good idea my friend
[07:48:32] What is the problem?
Whgere is sw log text?
[07:47:48] you must enter good username and password
[07:47:34] Setup server access https://infinity-box.com/?r=100166
[07:47:08] Click here @FlashFileSearchBot and type there phone name. You will get links
[07:47:00] What is the problem?
[07:38:36] https://t.me/cm2_es
[07:37:36] Not all models are supported for safe reset yet.

Check your model here https://forum.gsmhosting.com/vbb/f296/reset-without-lost-user-data-write-here-success-reports-2997627/

and here https://forum.gsmhosting.com/vbb/f296/oppo-lost-data-after-safe-format-2997569/

post your report to forum
[07:37:18] Click here @FlashFileSearchBot and type there phone name. You will get links
[07:37:02] First try with built-in loaders one by one and make IDENTIFY.
In case of problem post sw log text
[07:22:39] Because I don\'t want the phone to soft brick
[07:22:12] You mean 0 base with v2112 and i thick SLA will it work?
[07:16:31] vivo y21g frp not remve
[07:11:32] Cm2mt2 and try using built on loader
[06:55:55] Please help
[06:55:43] Joy bor va Pas bor
[06:55:20] Tecno spark 9pro which boot should I use
[06:47:52] Flash file not found in infinity iOS.
[05:35:51] How I can remove password without losing data ?
[05:06:23] HMD SERVICE BRO, SERVICE AVAILABLE
[04:38:21] You have 2 Options
1. Online
2. Easy jtag/Ufi Box (via isp pinout)
[04:25:59] Sir any solution how to unlock userlock on nokia c1 second edition?

InfinityBoxTalks 2022-07-27

[22:22:00] Alguien escribe en español ?
[21:39:52] ok i will do as you say tomorrow i will let you know
[21:38:30] Replug dongle
[21:37:59] Just uninstall cm2 a delete folder and restart PC 🖥 after install and let us know
[21:29:00] I couldn\'t solve this problem. It occurred when I tried to log in from my other pc.
[20:56:30] Any help pls
[19:58:32] c20 unlock problem
[18:48:52] Which tool on market can match cm2 ? We made a lot of money using this tool and we are very grateful.
[18:38:34] Do you know 45$ per year? Big money
[18:33:07] Like they always say, You are free to use any available tool on the GSM market to get your job done😁
[18:31:45] anyone help.
i need only restore original imei
[18:16:45] Cm2 must do something about OPPO mtk imei repair time is enough
[18:00:09] Z3x
[17:49:56] Please add can Nokia best unlock this free
[17:44:01] Yes Ive tried, ok, I\'ll do some tests
[17:43:16] Have you try with inbuilt loader?,, any error encounter send logs here
[17:38:45] As in, not cleared
[17:37:38] Model?
[17:36:59] Found 13 files Tecno kd7
1. Tecno_KD7h_H6210CDEH_Q_GL_210901V501
2. Tecno_KD7h_H6210CDEH_Q_GL_210520V445
3. Tecno_KD7_H6211FQRSTU_Q_GL_210313V382
4. Tecno_KD7h_H6210CDEH_Q_GL_211101V534
5. [17:36:22] Download firmware bro and select preloader file
[17:35:00] Some Spreadtrum phones are not supported, and I would like to know what is needed to make it supported with cm2sp2, for example, I have a Nokia TA-1391 with is not supported, and I had a Tecno Pova Neo also not supported, I have found both firmwares, would this be enought to make them supported? Inside the firmware are FDL\'s
[17:34:50] Check inbox
[17:31:14] not found in infinity
[17:31:12] Am not understanding your question. Frame it well sir
[17:30:44] chimera tool octoplus
[17:30:29] Check at infinity site
[17:30:08] No other tool apart from z3x??
[17:29:24] z3x very eaasy root before wih twrp and add supersu
[17:29:00] For connection to user response bro
[17:28:10] Which tools can I use please
[17:27:06] bd4h firmware link needed
[17:26:55] Galaxy G532 network lock please
[17:25:24] tecno bd4h firmware needed.help
[17:01:18] ??
[16:58:56] why is it giving this error
[16:56:09] Nothing found for U962 2019

If you will get the file upload it to support with iosFileUploader

[16:53:00] What do you need to evaluate it?
[16:38:50] Nothing found for u962

If you will get the file upload it to support with iosFileUploader

[16:38:12] Nothing found for u962 2019

If you will get the file upload it to support with iosFileUploader

[16:08:16] Thanks
[15:51:31] can i get BONTEL Q10 firmware pls Team
[15:47:40] Amharic or english
[15:21:05] how bro
[15:11:09] Yes
[15:10:16] i need reset cod Nokia 6310 TA-1400
[14:43:43] ta-1216 network unlock solution
[14:37:18] Hi team I do network unlock on MOBICEL STAR spd.... credit 5 why?
[14:02:09] My Nokia TA-1342 device not locked but its permently sim locked,help people
[14:00:50] Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L6502-F3208G-10.0-ZA-VDC-L-V009-20220428
Platform Version: MOCORTM_18A_ITELQ_W21.46.2_Debug
Project Version: sharkle_Smart_Phone
BASE Version:
[13:49:27] Please I need nvram for tecno kd7
[12:46:45] Okay
[12:46:26] Not working
[12:46:16] may work
[12:46:12] test point use
[12:46:04] Android 11 both vol keys does not respond
[12:44:39] connect in brom mode
[12:40:30] #CM2MT2 connection issue solution is HERE
[12:40:30] Card found : 3A591D71 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v723487 Ok!

Update configuration ...
Load IDBase v723487 Ok!

Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : In
[12:40:19] Samsung A107f Android 11 how to unlock kg lock,
[12:33:41] I have a question, what makes a Spreadtrum phone supported? Finding FDL\'s?
[12:24:31] i want the firmware of this phone
[12:14:46] Pls I need help on this
[11:59:43] realme c21-y repair imei splution ...
[11:55:55] Operation : Reset Settings [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM42)
MODE : NOKIA USB SERIAL
PORT : 42
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : CA368A335F45742B5F9BDB3A6C8746E0
BROM : Run BootLoader ...
BROM : BootL
[11:55:34] conect and mobile on
[11:55:23] but not factory reset in tool
[11:55:09] ta-1139 hang logo
[11:55:01] need help ta-12
[11:40:05] Help me
[11:37:23] Ta 1352 sim unlock
[11:22:59] NVRAM : 0x6D028BAE
NVRAM : State : Ok!
INFO : WiFi MAC : D01C3CCF0D77
INFO : BlTh MAC : D01C3CCF0D76
INFO : IMEI[1] : 353668116025047
INFO : IMEI[2] : 353668116025054


Backup sensetive data [ 18 ]
Backup path : Backup\\MT6580__92E5F1A16BCDD146397E9A63AA624515\\
[3] Read : NVRAM
[20] Read : NVDATA
[2] Read : PROINFO
[8] Read : LK
[4] Read : PROTECT1
[6] Read : PERSIST
[0] Read : PRELOADER
Backup done!


Done!
Elapsed: 00:00:44
[11:22:59] Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|B
[11:21:58] Price cm2 one year
[11:21:02] Prince cm2 one year
[11:12:28] the problème
[11:09:32] Spd drive ?
[10:56:43] Step
[10:56:11] It\'s blocked to this
[10:54:29] When I try with CM2 it\'s don\'t done
[10:54:01] Black screen
[10:53:51] Hello brothers
Help me, I have tecno pova ld7 stuck at bootrom mode
[10:36:54] Ooh ok
[10:36:18] Ooh how much is this app
[10:31:17] Nvram
Nvdata
Protect 1,2
[10:31:17] after write imei erase.Faktory reset menu phone not imei ready.Write imei repair security?
[10:24:32] Test Point
[10:17:16] Hello people, can help me hard reset de Nokia TA-1322
[10:09:47] I don\'t have a good backup, it arrived damaged
[10:09:12] Nvram
Nvdata
Protect 1,2
[10:08:24] restore complete backup and check
[10:07:27] Nokia G10 TA-1334 after flash +format erase imei.Restore NV ram imei OK.Insert simcard signal not.Pleas help
[09:26:46] MODEM TAG : MOCORTM_18A_ITELQ_W21.46.2_Debug_FM_BASE_18A_ITELQ_W21.46.2_sc9832e_modem_sharkle_Smart_Phone

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
what this means
[09:14:04] Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : LYF-F41T-000-02-34-101220.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sendi
[09:06:24] #CM2SP2 connection issue solution is HERE
[09:06:24] Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
i need fdl
[09:02:31] https://forum.infinity-box.com/viewtopic.php?t=5629
[08:58:17] Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L6502-F3208G-10.0-ZA-VDC-L-V009-20220428
Platform Version: MOCORTM_18A_ITELQ_W21.46.2_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_ITELQ_W21.46.2
HW Version: sc9832e_modem
CMP_Time : 11-16-2021 02:10:10

MODEM TAG : MOCORTM_18A_ITELQ_W21.46.2_Debug_FM_BASE_18A_ITELQ_W21.46.2_sc9832e_modem_sharkle_Smart_Phone

NVMn
[08:56:18] Another way - check your PC
https://www.nirsoft.net/utils/blue_screen_view.html
[08:55:57] yoou must install latest SoC drivers https://infinity-box.com/support/
[08:55:34] This phone unlock need username/password and credits

Username and password is here https://infinity-box.com/service/

Credits you can get here https://infinity-box.com/buy/
[08:51:07] SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L6502-F3208G-10.0-ZA-VDC-L-V009-20220428
Platform Version: MOCORTM_18A_ITELQ_W21.46.2_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_ITELQ_W21.46.2
HW Version: sc9832e_modem
CMP_Time : 11-16-2021 02:10:10

MODEM TAG : MOCORTM_18A_ITELQ_W21.46.2_Debug_FM_BASE_18A_ITELQ_W21.46.2_sc9832e_modem_sharkle_Smart_Phone

NVMng : SecurityInfo
IMEI[1] : 356450384306681
IMEI[2] : 356450384306699
WIFIMAC : CCA3BDE01B70
BT_MAC : CCA
[08:49:59] Cm2mt2
[08:49:29] When I connect fon, pc brings that and reboots. What is causing that and how can I correct it
[08:48:00] When I connect fon, pc brings that and reboots. What is causing that and how can I correct it
[08:47:38] I did not test it yet but you can try.
Also see texted models and results here https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/
[08:46:05] Nothing found for SM-N910G

If you will get the file upload it to support with iosFileUploader

[08:45:44] Found 1 file Tecno kg5k
1. Tecno_KG5k_F062_11.0_GL_V034_20220214

[08:45:23] post flashing log text too
[08:44:00] Where is it, my friend?
And what is the problem with your phone?
[08:43:02] Click here @FlashFileSearchBot and type there phone name. You will get links
[08:42:47] Nothing found for INE-LX1

If you will get the file upload it to support with iosFileUploader

[08:42:16] Why?
Give me sw log text
[08:42:00] Hi,
What is the problem with frp?
Post sw log text
[08:40:53] Found 18 files JDQ39
1. Sencor_MT6583_alps_Element_P430_4.2.2_BD79_89_W_V00_SXTD_W63_Fast_V04_140320_JDQ39_bd79_89_w_emmc_sxtd_w63_fast
2. Toshiba_RK30XXB_TOSHIBA_AT7_B_4.2.2_JDQ39.002021114.35_JDQ39_tos13t7gt
3. DNS_DNS_ES9701_4.2.2_RK30XX_ES9701_rev01_02092013_V1.01_JDQ39_rk30sdk
4. [08:40:41] Nothing found for zr72_wet

If you will get the file upload it to support with iosFileUploader

[08:39:54] You must buy CM2 Dongle from any seller https://infinity-box.com/buy/
Your next post must be with your dongle S/N otherwise you will get permanent ban.
Good luck!
[08:39:09] What is the error text?
[08:38:29] What is the phone problem?
[08:37:38] Post problem details to support forum https://infinity-box.com/?r=8
- device name
- information about the problem with the device
- software operation text from log file https://forum.infinity-box.com/viewtopic.php?t=1828

Do not attach images there but only copy/paste software log text
[08:36:56] FDE image is useless
[08:35:50] What is the problem with it?
[08:35:39] Mi Account info https://forum.infinity-box.com/viewtopic.php?t=3947
[08:35:06] Please post sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[08:34:29] Download and install Infinity CM2SP2 boot-pack https://infinity-box.com/?r=100186
[08:26:15] Make this https://infinity-box.com/?r=100155
[08:25:32] It\'s last warning, next actin is BAN
You must use google translate
[08:24:40] Please post sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[08:23:48] Later
[08:23:37] I do not understand the problem.

Post problem details to support forum https://infinity-box.com/?r=8
- device name
- information about the problem with the device
- software operation text from log file https://forum.infinity-box.com/viewtopic.php?t=1828

Do not attach images there but only copy/paste software log text
[08:22:15] Thanks🙏
[08:21:04] Easyjtag💯
[08:19:44] Yes sir network lock
[08:18:34] Do you mean network lock or network problem?
[08:10:34] Hello
Any solution for Nokia C1 second edition network problem? Please
[07:51:18] Try using cm2mt2 bro
[07:39:22] I\'m having this challenge on system what should have been the cause of this
[05:52:56] hello I want help to reset Nokia model TA- 1270
[05:50:47] but you can activate various tool in Infinity
check IOS for more details
[05:50:46] Thnx❤️
[05:50:24] no you can\'t activate Infinity in any other dongles
[05:49:37] Hello
Can cm2 be activated on eft dongle?
No dongle purchase for cm2
[05:48:21] english here
[05:42:55] سلام
روی دانگل eft میشه cm2 رو اکتیو کرد؟
بدون خرید دانگل برای cm2
[05:35:04] Redmi 6 m.t.k cpu
[05:28:34] Use built in loader bro
[05:28:30] Fix imei first
[05:28:14] Bro HMD service bro, though service available
[05:27:00] Wont work out on your device bro, hmd service only
[05:26:27] Region?
[05:26:07] Model?
[05:25:55] Device chipset?
[05:25:23] Samsung Galaxy Note 4 SM-N910G flash file
[05:24:58] Region?
[05:24:16] Use built in loader bro
[05:23:48] HMD SERVICE BRO
[04:53:38] https://infinity-box.com/?r=34
[04:53:38] open latest dongle manager
do report and fix
[04:50:50] help me how to fix
[00:56:39] Re-Install drivers and retry
[00:34:52] Need these

InfinityBoxTalks 2022-07-26

[23:01:43] Hi
[21:56:46] Thanks again but I did it beforehand
[21:32:03] https://infinity-box.com/service/
[20:50:13] scrCM2
[20:49:45] Which model
[20:46:38] Reach svc and boot up
[20:39:06] hi i need reset cod Nokia 6310 TA-1400
[20:26:15] Samsung Galaxy Note 4 SM-N910G flash file
[20:13:20] Kg5k boot file needed please
[20:12:44] Lots of risk that one kkkkk
[20:03:40] Share me the other app so i can reset my nokia 🙏🙏
[20:03:22] blackview tab 6 pro reset frp
[20:01:56] Ooh ok if u have that hmd share me plz
[20:01:29] don\'t say only hmd
hello jtag
[20:00:43] Not possible only hmd
[19:59:55] C20 reach on check SVC and then boot up any solution gyz
[19:56:47] Ooh ok bro...help me..i want to restore my nokia 1380 which free app can i use 🙏🙏🙏😔
[19:53:30] No but is for small phones not android phone
[19:52:26] This is cm2scr
[19:52:00] Is this paid app?
[19:49:26] U mean for the pc am using or the phone cpu?
[19:44:20] This is sdp use cm2SPD2
[19:24:54] Pls I need solution permanent mi account
[19:05:15] vivo y73 add plz cm2 team
[17:30:01] Spd with internet
[17:10:16] RMX3231 IMEI 00000
[17:00:49] Hi, I´m trying to read user data from a device with pattern lock and F2FS with FDE. If I carry out a full read flash, User Data file is 145 Kb of size meanwhile if I use the other option to read User Data directly, CM2 shows \"Operation not supported\"
[16:56:57] CPU?
[16:46:56] But is this channel helpful or i must go out??u r failing to help
[16:22:05] Screen shot
[16:21:49] Which one?
[16:19:38] yes
[16:19:16] Are you using original scatter or cm2 firmware?
[15:47:44] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
A
[15:22:22] Not supported bror
[15:20:52] Use CM2MT2
[15:14:25] dua l22 frp داره
با eft میتونم برش دارم؟
[15:10:11] Use Diag mode
[14:31:09] xiaomi_poco_x3_pro- Mi account solution anyone ?
[14:15:20] Infinix hot 12i da file
[14:05:56] nokia 130 ta-1017
[14:05:46] please help me
[14:05:41] error solution
[14:04:15] Hello how to factory reset nokia android
[13:58:10] Patch Level : JDQ39
Display ID : ALPS.JB3.MP.V1.8
Ver. CodeName : REL
Ver. Release : 4.4.2
Build Time : 20.07.2015
Product Model : A8S
Product Brand : A8S
Product Name : A8S
Product Device : A8S
Product Board : A8S
Product Manfct : alps
Product Info : zr72_wet_jb3

USERDATA : PLAIN

NVRAM : 0x71028A06
NVRAM : State : Ok!
INFO : WiFi MAC : 000000000000
INFO : BlTh MAC : 000046657201
INFO : IMEI[1] : 355871000626262
INFO : IMEI[2] : 355871000626270
[13:56:37] Can anyone help me with flashing files for this phone?
[13:51:51] Hello help me i want to hard reset my nokia TA 1380 plz help
[13:16:44] Help......frp
[13:02:49] I try but not working
[12:40:37] #CM2SP2 connection issue solution is HERE
[12:40:37] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[12:38:43] Mobicel Epic frp lock not opening how can I open CPU 9832E
[12:30:31] please some one help me whit last version of this firmware huawei INE-LX1
[12:13:48] I already posted logs for this model
[12:13:20] Hello team any solutions now for tcl a508dl simunlock?
[12:06:23] Can\'t identify f41t... But can flash with cm2sp2
[12:06:23] Nokia G10
[12:06:10] Nokia TA-1334 Firmware android 12? After flash andr 11 phone OK.Conect wifi autoimatic actualization andr 12 phone Death.Pleas help,reflash firmware
[11:56:36] Tecno kg5k nv file
[11:24:12] I\'m looking for this engine for Nokia 2.4 (TA-1270)
[10:58:13] I need
Full Firmware For Device Samsung Galaxy Note 4 SM-N910G
[10:55:23] سلام
Poco m3 5g
سریالشو با چی چنج کنم
[10:20:41] And besides you have to download latest cm2mt2 bootpack, for the model to appear
[10:20:15] read fw
[10:19:12] I just find the firmware for you now, download bro
[10:16:23] But the model doesn\'t show in home page and no firmware can be found.
[10:14:53] What are operation do you intend
[10:14:25] 💯✅👌
[10:13:31] Does this tool support model Tecno KG5J?
[10:10:58] x663 boot error solution
[10:06:32] Send recovery mode pics bro
[10:06:24] PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 594AF698F704CF8CEE80FC0E90A16343
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 89485038E20295CB40CC7D50FFFEB5D57E406BE64A9D2746AD72434BEBCA8614
BROM : SLA : Local Auth
BR
[10:06:24] #CM2MT2 connection issue solution is HERE
[10:06:24] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
MODE : PRELOADER PORT
PORT :
[10:06:24] Card found : FD1CAE6D , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

Update configuration ...
Socket Error # 11001
Host not found.
Load IDBase v312457 Ok!

Operation : Write Flash [ v2.34 ]


Error : Firmware NOT selected! Nothing to do!

Reconnect Power/Cable!


Operation : Read Firmware [ v2.34 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
[10:05:47] Please help me mi account permanent solution
[10:04:17] Yes
[10:03:24] Vivo y21 remove code possible with cm2 ??
[10:01:05] Nothing found for mobicel vibe

If you will get the file upload it to support with iosFileUploader

[10:00:41] Found 2 files Tecno KF7J
1. Tecno_KF7j_H696RTAjAk_R_OP_211013V460
2. Tecno_KF7j_H696RTAjAk_R_OP_210820V452

[09:51:51] Sir what about moto xt2155-9
It is booting fine but cant remove frp
[09:48:29] Vol- pressed and usb
[09:48:01] MediaTek MT6762G Helio G25 (12 nm) cpu
[09:47:58] As the one in the Sticker
[09:47:55] not boot
[09:47:43] no same IMEI
[09:47:40] Smart reset extra
[09:47:01] how to reset frp Redmi 10A with cm2 ?
[09:42:10] It\'s mtk phone, back up the phone and write the VRAM file.
[09:38:00] What is the cpu
[09:12:33] Guys please say something
[09:07:50] Imei different
[09:01:14] 5a4cxst
Antcard
4slots
[09:01:06] Any help or any one has flash file?
[08:59:43] Moto xt2155-9 not done it says ok but not open still locked
[08:56:10] NEON RAY PRO unlocking fails At that point how to overcome?
[08:55:58] Everywhere becomes silent
[08:55:47] But whenever I ask questions
[08:55:40] Cm2 forum is always active
[08:55:28] What\'s happening what\'s my account muted
[08:50:28] Any ideas please would you be appreciated
[08:50:16] Have flashed with two flash file
Still no progress
[08:49:50] I have Tecno cc6 unknown baseband and no inei
[08:49:37] Hi guys
[08:46:39] dongel is block how can i fix
[08:45:47] Oh,I see. I\'m afraid I can\'t help you, I\'m also searching for Spark 7p\'s firmware.
[08:44:25] Software mobicel vibe
[08:44:06] Can i have software of mobicel vibe??
[08:43:43] help me
[08:41:51] Sorry, I can\'t quite get you, what is mobicel vibe firmware?
[08:39:19] Help mobicel vibe firmware
[08:38:43] Hello I\'m new to infinity cm2. I have a tecno spart 7p. It is supported on the list, but I can\'t find the firmware file in download page. Can anyone help me?
[08:21:25] You format and flash , that is the reason, you have to restore nvram from a working phone
[08:16:34] Tecno kg7h frp solution anyone ?
[08:04:47] My account or email account and password or for infinity cm2 dongle
[08:04:12] What is the result with different PC?
[08:03:46] last 2 months
[08:03:37] not work my cm2
[07:54:09] Please help me OPPO A71...........Flash File Needed
[07:53:45] Please help me OPPO A71...........Flash File Needed .......Card found : 5F943FCF , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

UserName and/or Password not set! Can\'t continue!

Load IDBase v312457 Ok!

Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM9)
MODE
[07:49:38] Alcatel 9032Z joy tab2 Metropcs ask for code possible?
[07:29:27] thnk you
[07:18:31] Found 2 files p651w
1. iTel_P651W_F3116_10.0_OP_V033_20210906
2. iTel_P651W_F3116_10.0_OP_V032_20210816

[07:15:28] Hard to say.
As a first step reboot PC
[07:13:13] How to setup server access https://infinity-box.com/?r=100166
[07:10:40] wrong password.
get or reset it here https://infinity-box.com/service/
[07:10:05] Try to flash with another firmware
[07:07:21] Samsung clone show battery charge sign after flashing. Any help
[06:59:47] Reset password or e-mail HERE\r
\r
Apply username and password this way
[06:59:47] Server Error : Access denied: {\"Message\":\"Access denied 005570980E product 908 declined or wrong password\"}
[06:57:51] Mobicel rave sp unlock helps please
[06:56:07] 🆘
[06:47:28] resistor remove
[06:47:02] Hi. what this?
[06:43:23] itel p651w after flashing on off ..anyone have right firmware for it ??
[06:28:25] Nothing found for ta-1383

If you will get the file upload it to support with iosFileUploader

[05:54:50] Help cm2sp2 no imei options show how to enable????
[05:49:22] Download platform detector from infinity iOS,and install it to your system, it\'s tools to know phone CPU
[01:36:33] Type: Infinity-Box/Dongle [CM2]
S/N: A7CF7D7B
Username: 00A7CF7D7B
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0134; Expired: 24-May-2012

Your [CM2] support period is expired.
Previous software versions can be used as before.
To use latest software updates please renew support:
1. Contact to any seller https://infinity-box.com/buy/
2. Send your dongle S/N to seller
3. Order [CM2] support renew for 1 or 2 years

How to check support period

InfinityBoxTalks 2022-07-25

[20:57:22] Hello to solve the problem of a cell phone that only works with wifi model motorola e7 plus can be done with the infinity box?
[20:52:47] Tecno KG5K boot file needed?
[19:59:52] Tanx
[19:58:47] https://infinity-box.com/?r=100196
[19:56:44] Yes no result same
[19:56:20] Have you tried to flash?
[19:56:05] Please make this https://infinity-box.com/?r=100103
[19:56:01] Hang on logo
[19:55:43] What is the problem?
[19:55:31] Should we ban you?
[19:55:29] even After flash note 2 ...solution
[19:55:08] translate.google.com
[19:54:46] فایل فلش نوکیا mt6261 رد فلش cm2
[19:49:32] Thanks 🙏 Infinity Cm2 Team My Problem Solved
[19:47:08] Spd sci module 1.7
[19:46:29] !!!?
[19:46:14] Probleam?
[19:45:51] فایل فلش نوکیا 105 TA-1034 گوشی نوکیا طرح هست. فایل فلش فارسی فرمت bin دانگلCM2 میخوام
[19:42:29] I have many spd frp job cant without CM2 !!
[19:41:52] Need 24hour wait?
[19:41:14] I need your help 🆘
[19:40:55] Plz my cm2mtk2 doesn\'t open
[19:40:53] Paid
[19:40:37] very good!
[19:40:30] Yes
[19:40:17] ok, good. I hiope you say truth. Right?
[19:39:52] Emergency?
No friend, you must wait 48 hours to get your ccount back after your activity
[19:39:44] ok promice
[19:39:02] You must promice tht you will never upload useless files any more.
After that I will return back your account and all options.
[19:37:09] help me emergency!!
allredy 2month face this problem
[19:36:19] ?
[19:34:35] id pass 100% ok
check my sn:006B7641F1
whats is the problem
[19:32:25] when indentify
[19:31:52] Reset password or e-mail HERE\r
\r
Apply username and password this way
[19:31:52] FDL : Process authentification ...
Server Error : Access denied: {\"Message\":\"Access denied 006B7641F1 product 908 declined or wrong password\"}
>>> ERROR : Server process failed!
>>> ERROR : FLASH FDL AUTHENTIFICATION FAILED!
[19:30:41] Make identify at first
[19:29:18] no just frp
[19:28:56] what do you want to do then? network unlock requires 5 credits
[19:28:07] no
[19:28:00] Do you have credits in your account?
[19:27:40] https://user.infinity-box.com/settings/
Sign in ok
[19:27:14] now update but same problem
[19:26:36] try updating your password. just change it, and then enter the changed into the program
[19:13:21] Downloaded latest
[19:08:15] Spd full flash plus format repair imei done mdm remove
[19:06:32] declined or wrong password
[19:06:15] write everything in the software correctly. and everything should be fine
[19:05:43] Reset password or e-mail HERE\r
\r
Apply username and password this way
[19:05:43] Server Error : Access denied: {\"Message\":\"Access denied 006B7641F1 product 908 declined or wrong password\"}
[19:05:30] Reset password or e-mail HERE\r
\r
Apply username and password this way
[19:05:30] Server Error : Access denied: {\"Message\":\"Access denied 006B7641F1 product 908 declined or wrong password\"}
[19:03:37] Then what is the problem?
[19:03:03] Here log in ok
[19:02:38] can U login here https://user.infinity-box.com/
[19:02:11] Id pass ok
[19:02:06] Alredy
[19:01:52] reset your pass
[19:00:39] Type: Infinity-Box/Dongle [CM2]
S/N: 6B7641F1
Username: 006B7641F1
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0153; Expired: 11-Apr-2023

[19:00:06] 006B7641F1
[19:00:04] Is it still in support ,if yes does it cover Nokia 1.4
[18:59:35] serial/ please
[18:58:53] Send your dongle S/N to seller https://infinity-box.com/buy/ and order CM2 support renew 1 year or 2 years\r

[18:58:52] Is Nokia bb5 dongle still in operation,I want to renew mine if is please I wanna know
[18:57:51] Please check my sn whats is the problem?
[18:56:50] I know password
[18:56:33] Reset password or e-mail HERE\r
\r
Apply username and password this way
[18:56:33] FDL : SEC : RSA auth required! 

FDL : Process authentification ...  

Server Error : Access denied: {\"Message\":\"Access denied 006B7641F1 product 908 declined or wrong password\"} 

>>   ERROR : Server process failed! 

>>   ERROR : FLASH FDL AUTHENTIFICATION FAILED!

Sn:006B7641F1
[18:56:13] Inbox please
[18:51:13] yes
[18:47:57] Any cm2 admin here
[18:28:05] Yes is reading 📖
[18:26:16] Done and dusted
[18:24:25] Easy buy permanent solution dm me
[17:39:10] Use dongle manager and see if it can read info
[17:36:41] This is an mtk chipset bro
[17:36:41] 😏
[17:34:15] It\'s just pop-up and close
[17:33:51] Cm2mtk2 can\'t open 👐 in my system
[17:03:42] Hello pls which of cm2 version support Tecno KG5 it seems is uni Sico
[15:37:15] PTFN : MediaTek USB Port_V1632 (COM116)
MODE : BOOTROM
PORT : 116
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : F54188E63626E97D2B4737EC9CFE25BF
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x00000001
AGENT : INFINIX : SEC_NEW |
[15:37:09] I need help
[15:28:44] Cm2 mtm2 inbuilt loader
Raphael v2
[15:15:24] 👍🙏
[15:06:57] In account there is 5crd but when i do operation tool say balance is 0
Same SN
[14:45:29] thanks
[14:41:29] How to get the right one
[14:39:31] Input correctly username and password in settings tab
[14:35:50] Please help
[14:35:49] What\'s the matter
[14:13:42] itel a661w frp cm2 any solution pls
[14:06:09] Yes possible bro with cm2, download latest bootpack and install
[14:04:38] Please assist, Nokia C20 is giving this error when trying to unlock Sim lock
[14:03:19] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2F4A7D0540600FE2C255AC6C3234FDC1
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : B
[13:30:49] Remover frp tecno pop5 android 11 help me.
[13:17:23] Thanks lmme give a trial
[12:30:43] Where
[12:29:57] Itel s16pro fdl file
[11:52:15] All Tecno $ Infinix SPD mdm file and solution Available permanently 👌
[11:45:45] Yessssssssssssss
[11:45:40] #CM2SP2 connection issue solution is HERE
[11:45:40] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[11:44:36] Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...


>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Id
[11:41:11] Try this bro
[11:40:35] Make sure your system in connected ti net bro
[11:40:26] Network MTK cpu
[11:37:39] This is the error I received after boot pack installment
[11:36:45] Hard reset not solution help
[11:34:02] Permanent available
[11:29:28] Thank you boss
[11:27:07] Try to restart system bro
[11:20:28] 10000000%%%%%%%%%%%%%%%
[11:19:15] Same thing
[11:19:09] Have done that severally
[11:17:16] Repeat operation bro
[11:11:22] Infinite 625 trying to identify it but this what am getting
[11:07:02] Any solution presently?
[11:06:29] I thought as much
[11:06:19] Operation : Read NVM [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : KG5k
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True
[11:06:16] 🤔
[11:05:28] It’s easybuy phone
[11:04:35] If i may ask why did you really need to backup this device though its recommended but at times when things got weird we neglect and continue with action
[11:03:12] It’s SPD
[11:02:55] Bro I couldn’t backup nvram and FW on tecno KG5k
[11:02:50] With which tools?
[11:02:25] Logo flash
[11:01:58] What\'s the issue before lost of imei?
[11:01:32] Baseband ok
[11:01:02] Poco m2 unble get imei
Suport cm2?
[10:57:49] thanks bro
[10:56:45] 👍 download latest bootpack bro, select correct loader for your device, make sure to backup device FW and NV data before Flashing, download compatible FW,then flash on it via flash tab.
[10:54:40] If you are from Malawi contact me
[10:53:54] Spd
[10:53:06] Chipset?
[10:52:53] Network or password?
[10:52:28] Not supported here for now, any probs about that?
[10:51:50] Download latest spd bootpack then select device loader bro
[10:50:13] Ok do you really need such solution to be shared publicly cheaply like that?
[10:18:27] Please 🙏
How to write firmware on Infinix hot 10i_pr652b
[10:09:02] Please which boot that support Tecno spark 8p ( KG7h ) with cm2 MTk2?
[09:47:16] TCL 20 XE unlock Possible from infinity Server?\\
[08:52:50] How to root SPD phone
[08:52:17] How to unlock bootloader on SPD lates spu
[08:50:05] How to unlock bootloader on SPD
[08:29:21] Samsung a03 core fdl file
[08:21:20] Admin it doesn\'t connect with cm2 only miracle thunder
[08:18:47] iTel S16 iTel W6502 frp solution with cm2 help pls
[08:14:49] Send sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[08:13:31] Send sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[08:12:58] Found 3 files Tecno BD2
1. Tecno_BD2p_SP613DEF_RGo_OP_210825V8
2. Tecno_NVM_BD2P_867400020316612_w_fixnv1_a.nvm
3. Tecno_BD2_SP613ABC_QGo_OP_211012V010

[08:12:30] Found 24 files BD2, search limit is 20 files per server
1. Tecno_BD2p_SP613DEF_RGo_OP_210825V8
2. Tecno_NVM_BD2P_867400020316612_w_fixnv1_a.nvm
3. Tecno_BD2_SP613ABC_QGo_OP_211012V010
4. RM_1011_20.10.11_059V6H2_1EB2BD2B_RM_1011_IMA
[08:11:55] If you have good flash files you can upload for all users this way https://infinity-box.com/?r=37
[08:11:26] For Tecno KG5K
[08:11:16] Send sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[08:11:00] What other loader can I use?
[08:10:19] You may try to use another loader
[08:03:18] Operation : Read NVM [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : KG5k
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True
[07:47:50] Ta1352 after unlock.. Phone lost imei
[07:29:29] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : KG5k
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True
[07:28:25] Operation : Read NVM [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : KG5k
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True
[07:17:36] It\'s Ok now
[07:15:22] translate.google.com
[07:14:34] reboot PC
be sure all antivirus are off
login to PC as administrator
[06:46:30] Try it on non partitioned system
[06:45:38] Found 30 files Nokia 105, search limit is 20 files per server
1. noname_copy_J105_4_61D_11C_128X160_PCB01_gprs_MT6261_S00.J105_4_V01_copy_Nokia_105_TA_1034
2. noname_copy_M105_61D_PCB01_gprs_MT6261_S00.M1052_IJ_190917_V01_copy_Nokia_105_TA_1034
3. noname_copy_H3550M_V4_7_11B_PCB01_gprs_MT6250_S00_copy
[06:42:16] i need frimware nokia 105 TA-1174 mt6250A
[06:41:13] Yes
[06:40:49] Yes
[06:40:33] Is your pc partitioned?
[06:30:33] pv
[06:30:23] Have done that several times still the same
[05:51:57] thanks 👍👍
[05:34:03] سلام gplus p10 قفل داره با چی ریست کنم؟
[04:59:46] Snap and send device screen interface
[04:58:14] Restart PC
[04:57:56] Thank you my problem was solved yesterday 🙏🏿
[04:57:24] THIS DONGLE WITH THE PROVIDED SN IS ACTIVE BRO
[04:56:13] Type: Infinity-Box/Dongle [CM2]
S/N: 7CAA08EF
Username: 007CAA08EF
Account Status: Active
Hardware Status: Ok
#0: Infinity-Box/Dongle [CM2]; Firmware Version: 0153; Expired: 25-Jul-2023

[04:53:53] what code?
[04:33:18] Use calibration code
[03:46:14] hard reset

InfinityBoxTalks 2022-07-24

[23:53:35] help me please
[23:53:16] a325f fingerprint calibration
[23:23:55] Brother

M325F u3 Bootloader unlocked Logo Fix file needed please team?
[23:21:00] ok
[23:20:16] It\'s the first time I had that error. Will try and look for solution.
[23:18:02] i even tried on another pc
[23:17:51] Restart your computer or laptop
[23:17:23] I\'ve restarted like 5 times
[23:17:11] Then try once again
[23:16:43] thats it
[23:16:36] Try to restart your PC
[23:16:29] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : KG5k
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True
[23:15:27] kg5k tecno
[23:14:53] That\'s in possible what is the name of the phone?
[23:12:27] i have identified already
[23:11:19] First identify the read NV as written.
[22:57:03] Operation : Read NVM [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : KG5k
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True
[22:56:06] where am i sending sw log to
[21:41:23] Help window defender disabled and having more than 200GB free space
[21:39:00] Help
[21:30:19] How do i do it
[19:51:11] Cm2 no demo permanent removal
[19:06:38] Besoin d\'aide 🙏🏿
[19:05:56] my reseller cannot activate my cm2 dongle which is having problems with my s/n 7CAA08EF
[19:00:11] 😀
[18:59:41] 😊
[18:59:28] Welcome
[18:59:04] Okay
[18:52:06] I share for free all factory file if you need not solution
[18:50:45] It has password
[18:50:23] Open look inside
[18:49:59] Does it have password?
[18:49:15] https://www.tu13-dhek.com/2022/07/infinix-hot-12i-x665-mdm-scatter-file_19.html?m=1
[18:35:02] Bring it here
[18:31:44] INFINIX HOT 12i MDM FILE PERMANENTLY AVAILABLE FLASH BY CM2 DONGLE PLUS UNLOCK BOOTLOADER JOB DONE 👍
[18:15:44] Tecno BD2
[18:09:30] phone model
[18:07:56] help me Infinix clone firmware x682b spd
[18:04:56] Tecno pop5 clone
[18:03:51] Fix unknown baseband,this is the log
[17:59:31] Guys help, \"NVRAM area is blank or damaged\" it\'s saying invalid IMEI
[17:49:36] Hello all dear brothers....redmi 9A unable to show ime plus nv data also crupt any solution please?
[17:41:46] But format with boot12 ok flashing error
[17:41:28] I try boot 12, 13 and 8 and 4 still same error
[17:40:56] It detect with miracle thunder but says boot not support or CPU bad
[17:40:09] I try 1.58 but phone not detecting with cm2
[17:39:42] Cm2
[17:39:04] Anytool to flash .bin file??
[17:38:45] Pls how to flash .bin file in Nokia Ta 1030 apart from miracle box
[17:31:32] I have tried different cpu type one by one, but it is still giving me same problem. the fdl loaders for this model is not in the support download area ( tecno kf6 spd cpu), and the cpu model is not enlisted on the the tecno part of the last updated cm2sp2 boot-pack.
[17:22:12] #CM2SP2 connection issue solution is HERE
[17:22:12] Card found : 09C620CE , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Tecno : PR651
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed :
[17:20:29] this is log text.
[17:12:56] Yes. Let send it
[17:11:37] flash, select the preloader and did not turn on more
[16:42:12] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM22)
MODE : BOOTROM
PORT : 22
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2F4A7D0540600FE2C255AC6C3234FDC1
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM :
[16:21:34] Spd
[16:01:48] Uninstall all manually installed drivers then download drivers from support and install it
[15:40:31] Mtk
[15:29:41] Please which driver do I have to use to access it
[15:26:45] What driver have you install?
[15:25:42] Not only for cm2mt2 bro but for all cm2 infinity software, service available
[15:10:59] For spd
[15:10:47] It totally doesn\'t wait for the time it write on the screen
[15:09:52] Am a new user any solution
[14:53:00] nokia ta-1342 permanent locked but cm2 says devices not locked
[14:44:13] Tecno Mdm file available fix boot logo, storage & ram 🔥🔥🔥
[14:30:51] I did nothing worked for me.. couldn\'t find tp
[14:13:06] hi, how can to work with sc6820?
[13:50:52] cm2mt2 activation need
[13:50:20] What is
[13:30:28] Mobicel rio
[13:09:50] SoC drivers https://infinity-box.com/support/
[13:09:10] try with cm2sp2.exe or with cm2scr.exe or with cm2spd.exe
[13:08:19] What is the cpu type?
[13:07:38] https://infinity-box.com/support/?s=2
[13:07:24] What is the firmware version?
Identify should return it.
[13:07:14] best dongle smart card driver plz
[13:00:44] Have you tried?
[13:00:32] Please copy/past software text.
Text is in operation.log file
[12:59:31] Here is info how to Sign In or reset your forgotten password https://infinity-box.com/service/
[12:51:45] https://dl1.infinity-box.com/00/pub/?dir=/soc-drivers
[12:49:52] Bootkey or driver
[12:49:11] Ta1385 unicos driver need plz
[12:47:53] Please
[12:47:46] Nokia Ta 1030 cm2 drivers
[12:42:10] Thankss
[12:25:15] Merci
[12:03:18] Team infinity
[12:03:00] Hi sir
[11:57:08] Any idea to fix this samsung A23🖕plz
[11:45:21] Miracle or flash tool firmware
[11:45:02] Nokia Ta 1030 MTK 6260 latest firmware please
[11:40:32] Please how root Android 11 dm me
[11:36:26] Please give me the solution
[11:35:36] Lava iris 51. Cpu sc7731c. Frp
[11:26:24] What is the problem
[11:24:23] its not formating
[11:24:00] nokia ta 1165 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
[10:48:52] I need guideline for flashing Tecno 901 with cm tool
[10:17:43] https://user.infinity-box.com/
[10:16:22] How?, send logs here bro
[10:16:17] Nothing found for rmx3265

If you will get the file upload it to support with iosFileUploader

[10:14:35] Yes solution available 💯👌✅
[10:09:43] Operation : SP Unlock [ v2.34 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM44)
MODE : BOOTROM
PORT : 44
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 5481E1FBA0927435E81C7EA0DE97C9AC
BROM : SecLevel : 0x00
[10:09:29] Operation : SP Unlock [ v2.34 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM44)
MODE : BOOTROM
PORT : 44
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 5481E1FBA0927435E81C7EA0DE97C9AC
BROM : SecLevel : 0x0
[10:08:44] Vodafone VFD620 SP UNLOCK Failed
[09:35:40] Delete the file and reextract the file if still shown you the error the problem is from emmc
[09:33:36] Is there anyway to connect a032f samsung with cm2
[09:25:18] Solution for this Error Admin?
[08:41:08] how do i sign in?
[08:40:43] for download firmware from support site
[08:40:29] i need sign it my user name and password but everytimes its wrong
[08:39:42] hello
[07:25:20] Send sw log text https://forum.infinity-box.com/viewtopic.php?t=1828
[07:14:09] It doesn’t want to identify tecno pr651h and unable to write nvram
[07:11:18] Please help me remove security plugin from tecno spark 4 . It is blocking the phone from being reset and if I use smart reset it will lock back after few minutes
[06:52:06] untick auto EMI in Setting
[06:52:06] Operation : Write Flash [ v2.34 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Disabled

Files :18
[FL] : Set : preloader_x659b_h696.bin
[FL] : Set : tkv.img
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : md1img.img
[FL] : Set : spmfw.img
[FL] : Set : scp.img
[FL] : Set : sspm.img
[FL] : Set : gz.img
[FL] : Set : lk.img
[FL] : Set : logo.bi
[06:27:44] What is the problem?
Send me text with info