Infinity CM2, Infinity [BEST] @InfinityBoxTalks 27-Apr-2024 [page 53]

[page-1] [page-2] [page-3] [page-4] [page-5] [page-6] [page-7] [page-8] [page-9] [page-10] [page-11] [page-12] [page-13] [page-14] [page-15] [page-16] [page-17] [page-18] [page-19] [page-20] [page-21] [page-22] [page-23] [page-24] [page-25] [page-26] [page-27] [page-28] [page-29] [page-30] [page-31] [page-32] [page-33] [page-34] [page-35] [page-36] [page-37] [page-38] [page-39] [page-40] [page-41] [page-42] [page-43] [page-44] [page-45] [page-46] [page-47] [page-48] [page-49] [page-50] [page-51] [page-52] [page-53] [page-54]

InfinityBoxTalks 2021-11-08

[12:18:19] Oppo cph1823 cm2 flashfile need
[11:53:54] Unlocked C20 today for the 1st time, Thank you infinity cm2. Now await nokia c1 2nd edition.
[11:53:48] Repair the IMEI
[11:52:50] tecno bd1 frp bypass spreadtrum cpu.help out
[11:52:32] Well done
[11:52:18] Good
[11:51:06] Work or not
[11:50:30] It done
[11:50:25] How can thank uu man
[11:49:56] 😍😍😍😍💋💋😘😘❤️❤️❤️💋😘😍😘🥰🥰😍😍
[11:47:34] Cm2 supported ta-1279 ?
[11:46:27] Iz nokia 1.4 pin reset supported?by cm2
[11:45:30] How now
[11:33:54] I encounter desame challenge with KF7
[11:32:08] Hi,
I had this error \"Error: Device NOT support for SAFE READ!\" when trying to Dump TECNO KF6i & CG7. Any fix available?
[11:10:52] load new os
[11:10:42] I want flash
[11:10:27] i wasn\'t flashing.... frp bypassing only
[11:10:09] ??
[11:09:58] ??
[11:09:50] 🙄🙄
[11:09:49] Wen flashing it
[11:09:43] U mark all option
[11:09:34] How did u do it
[11:08:45] How about tecno spark 7 spd?
[11:06:35] i used it and it worked
[11:06:11] Use v033 pac
[11:05:31] OK boss
[11:05:18] Yes
[11:05:18] Not yet
[11:05:09] Xtouch E5 firmware anyone help
[11:01:26] I need cm2 credits
[10:53:39] it worked........!!!!!
[10:53:18] Cm2 credits ????
[10:52:41] How do.
Is there an explanation?
[10:52:38] 👍
[10:44:44] Load credits, and do unlock. Will cost 5 only.
[10:35:14] I have infnity best dongle
[10:33:35] Nokia ta-1279
[10:33:05] Hello. How are you I need help unlocking the network
[10:11:20] Including
[10:11:08] Yes
[09:41:08] Yes
[08:44:40] hi eroor cm2 If you are already registered click to \"No\"
Can\'t connect to server, disable Antivirus/Firewall and try again.
[07:37:15] I av d version ...d new version v033 frm good person here tell wat to do b4 i proceed
[07:36:15] Show me boss
[07:36:05] 🙄🙄🙄
[07:36:02] Cn Pls show me option to mark i dnt wnt kill phone pls
[07:32:45] cro-l03 firmware scatter wanted
[07:17:25] Yes
[07:14:33] Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN [RAPHAEL]
BROM : MEID : 23074E4C221199FA65638C88C20929D2
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SD
[07:14:15] Explain pls
[07:14:06] Do u mean i should mark all option wen flashing it
[07:13:39] Yes am going for d version of phone but can\'t find it.......
[07:12:59] I dnt get
[07:11:19] Use version v033 the mark all repair box
[05:32:12] I think i should go for d formal version which v033
[05:31:18] I even got d v031 somewhere ut doing d same reboot after 5seconds
[05:30:27] 🙄🙄🤔🤔
[05:30:22] Or is dere way i cn fix dat
[05:23:39] 🙄
[05:23:36] I need v033 d one cm2 it making d phone to reboot
[05:22:14] Get it at cm2 support download
[05:14:52] 78$
[04:33:40] Any new updates mtk mdm locked samsung phones?

InfinityBoxTalks 2021-11-07

[21:27:18] ❤️❤️✅
[21:23:13] I cm2 SPD2 not open
[21:22:48] Hi sir
[20:38:19] bro
[20:34:35] Inbox.
[20:23:19] How much is the cm2 dongle now?
[19:59:11] https://support.halabtech.com/index.php?a=downloads&b=file&id=540254
[19:58:44] Itel S16 (W6502) v033 firmware flash file anybody
[19:38:08] help.
[19:37:54] https://support.halabtech.com/index.php?a=downloads&b=file&id=434143
[19:28:03] i need infinity box AST,it ask a passcode can i get it please
[19:26:51] hello
[16:44:41] But there is no file for it online I need the file
[15:54:27] Any tricks to dump firmware from Tecno KF7?
[15:19:09] Flash with 3utool
[14:41:29] Not powering, it hangs on logo
[12:00:45] Yes
[11:09:34] Thanks again ❤️❤️❤️
[11:09:27] Solved sir
[11:06:45] Done
[11:03:54] Okay bro
[11:03:47] Yes, or should how many times?
[11:03:09] When I update with dongle manager I got, \"AUTHENTICATION STAGE ERROR:\"
[11:02:49] When I update with dongle manager I got, \"AUTHENTICATION STAGE ERROR:C
[10:49:50] 215417BF
[10:36:20] Bro am waitng...
[10:26:36] 🙄😳
[10:26:33] Ok
[10:25:07] Flash file
[10:24:58] My itel s16 w6502
[10:22:57] Boss wat about my
[10:19:55] And I tried all its keep saying bad file
[10:18:38] I selected MA2425_T402_OM_BOOTLOADER
[10:16:29] Bad file
[10:16:23] Still the same result
[10:07:12] Ok sir
[09:55:47] I have this one
[09:54:04] The last one
[09:53:13] EnHiAr
[09:50:03] T402-MA2425-EnHiAe-OM-2019
[09:47:30] Tecno t402
[09:47:11] Ok
[09:46:18] anybody with neon ray pro flash FDL? thank you
[09:44:50] It happened to me wen i update d os it work fine
[09:44:28] May b u connect internet to u system it update half way
[09:43:29] It shows bad file detected
[09:43:20] But can\'t load it back
[09:43:04] I backup
[09:42:55] While d one i download is v026
[09:41:48] V033
[09:41:31] V033
[09:39:36] No any fault.bin file
[09:35:01] No was installed redirector elier
[09:31:14] I tried it but could not load file
[09:29:58] Only just dat i want reload it to remove joypay mdm
[09:29:58] Work normal
[09:29:58] Hang on joypay
[09:29:58] B4
[09:25:30] Which tool do I use to flash file on Tecno t402
[09:22:09] I have downloaded the file but I don\'t know how to flash it with cm2
[09:18:36] How to flash file on tecno t402 with cm2
[09:15:47] Removed
[09:15:36] Yes
[09:13:47] Removed all
[09:09:28] No any fault.bin file bro
[09:09:05] Yes bro am hr
[09:07:34] spd.
[09:07:32] hisense e30 lite
[09:07:07] model
[09:06:52] it just ends there.
[09:06:07] problem?
[08:59:02] OK boss
[08:50:48] This user claim to be able to renew for me @scholarsuraj
[08:50:04] I don\'t think so... But messages seems to be delivered and not read
[08:47:55] Hello
[08:44:10] Thank I will
[08:40:50] Pls i want to renew my subscription, am in Nigeria. How do I do that pls.??
[08:36:49] Infinity Pinout database v2.04 released - pinouts, test-points, bootkeys
https://infinity-box.com/news/?r=4194
[07:55:11] 😂😂👍
[07:53:46] Still Am waiting
[07:42:58] Elloooo
[07:35:00] i also still waiting for mu answer
[07:34:39] Done
[07:34:03] big time
[07:32:13] I need latest firmware itel s16 w6502 anybody pls
[06:56:58] change pc and see
[06:50:40] Fixed ✅💯💯💯
[06:44:52] Seems admin is choosing who to respond to 😢
[06:43:19] Please me out with this problem with my cm2
[06:38:22] D one i see it making my phone to reboot i think i need higher version
[05:51:34] Ok
[05:50:53] Software boss
[05:49:49] Scanning problems and \"no problem found\" to report and fix it.
[05:37:07] Hi
I need support my CM2 Not running when I run, I getting mesaage \"Smart-Card misconfiguration: Contact to support\'
My Serial no: 215417BF
[05:33:51] hardware
[04:12:39] Mng to u people
Itel A16plus dead any solution
[03:05:33] to rollback ?
[03:04:55] I killed my LG D855 with infinity box which was my fault battery was low so any solution for that plz sir
[03:03:26] sir
[03:03:22] any other sloution?
[03:01:10] plZ
[03:01:05] how to get sm software activated any sloution
[01:16:54] Huawei vtr l09 frp solution

InfinityBoxTalks 2021-11-06

[22:01:23] I download d file how do i flash it on d phone itel s16
[21:26:31] Hi
I need support my CM2 Not running when I run, I getting mesaage \"Smart-Card misconfiguration: Contact to support\'
My Serial no: 215417BF
[21:10:20] Hi
[20:23:52] Am asking @InfinityBoxBot
[20:22:32] remove USB director
[20:00:04] Does it work on cm2? How do I know
[19:58:55] I own an infinite dongle box.
[19:20:13] 🙏🙏🙏🙏🙏
[18:27:58] 🙏🙏🙏solution to this?
[18:15:25] No
[18:08:07] Unlock option is disabled
[18:01:00] Is it supported in this version?
[18:00:38] Thank you very much for your guidance, Master
[17:59:56] ok
[17:59:51] 👍🏻
[17:59:40] 👍
[17:59:35] thank you
[17:59:32] 👍
[17:58:39] I only have a problem with cm2
[17:56:28] no. for dangel umt ok
[17:51:29] test point edl
[17:48:18] yes
[17:48:12] ok🥲
[17:24:38] I installed Visual Studio 2013 to learn programming. Then suddenly I wanted to enter the CM2 SPD2 program to repair the phone imei, but it did not work. I didn\'t save it in VStudio so that Projeck wouldn\'t go off. i didn\'t know that. please help
[17:24:30] Is there any way I can copy firmware from KF7?
[17:18:43] I can\'t post a reply on the forum? Couldn\'t register?
[17:08:22] A025g frp bypass solution
[17:02:19] What can I do?
[16:13:07] I even changed Windows, but the problem persists
[16:12:07] Please advise
[16:10:00] Hello, do not be bored friends
[15:32:21] Itel s16 w6503 firmware
[15:32:07] Pls
[15:32:07] House
[15:04:20] stylo bold plus payjoy remove done BY INFINITY.
[15:02:59] RNID : DB68ABBB8F1EAC257CF1FA6CE20CBB39

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM7)
MODE : PRELOADER PORT
PORT : 7

Boot done!

Set default path : C:\\InfinityBox\\CM2MT2\\phdata\\

Ready!

Operation Write Memory

Write selected partitions [3]
[0] Write partition : NVRAM
Write from : C:\\InfinityBox\\CM2MT2\\phdata\\NVRAM.bin
Write partition Ok!
[1] Write partition : NVDATA
Write from : C:\\InfinityBox\\CM2MT2\\phdata
[15:02:58] PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : MEID : E6F6C0525E00C61CAC2155944CDEECFD
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Enabled
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x000
[15:02:58] PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : MEID : E6F6C0525E00C61CAC2155944CDEECFD
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Enabled
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x000
[15:02:58] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : MEID : E6F6C0525E00C61CAC2155944CDEECFD
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM

[14:52:18] Help me🙏
[14:08:55] 😩😩😩😭😭😭
[14:04:23] admin help meeeee?????
[14:03:29] help me?
[14:03:22] === DongleManager [Infinity] v1.80 [06.11.2021 17:32:50] ===
Box/Dongle type selected: Infinity-Box/Dongle
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 00007B5F200A4082
Box/Dongle found: Infinity-Box/Dongle
Reading...
Serial No (S/N): 1EF17B5F
Firmware version: 0149.02
=== Process started: 06.11.2021 17:32:51 ===
Connecting to server
Server connection successfully established
Checking DongleManager version...
Your DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on serv
[14:02:55] hello
[13:47:09] Yes possible
[12:55:06] Oppo A1K.
[12:49:52] Oppo mtk SIM unlock possible with cm2mt2
[12:14:32] It has no logic, that his other tool takes out the update that I have requested so much with infinity

AMT Dongle Powerful Smart Phone Tool V1.2.6 Released.

added support for:
* One click operations for following models:
- Unlock BootLoader (one click)
- Relock BootLoader (one click)
- Remove FRP Lock (one click)
- Safe Wipe UserData (one click)
- Read & Write RPMB (one click) => Limited Vendor (Vendor specified)
[11:04:39] not much info just tried flashing
[10:59:20] never knew there would be issues
[10:59:08] phone was working perfectly fine.....just wANTED to do whole format flash like mtk
[10:54:18] support pls respond
[10:45:09] where do i get correct file🥲
[10:44:51] i used file frm support
[10:43:52] pls help phone no longer coming up
[10:43:34] Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR651H-F6317-11.0-OP-V032-20210602.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
[09:28:49] ok
[09:28:09] ok i check agin will confirm
[09:26:14] Sir other laptops use but still same mt-2 steup problem
[09:25:46] Sir windows 10
[09:25:16] And spd-2 step
[09:25:10] Windwos 10 use with windows antivirus or using time will disable other dongal work fine umt eft stup old cm 2 step work fine but only problem with mt-2 step
[09:23:53] Sir already try other pc same issue don’t use any antivirus sir in my system
[09:22:27] Please check and confirm
[09:22:18] 3FD52A71
[09:21:55] I send it
[09:17:28] Sir already try don’t show any bug but same error not opening step
[08:32:37] How much will it cost to update a dongle license
[08:13:32] ؟
[08:06:09] I have Nokia c10 ta 1342 imie repair done 2 is done but is not done
[08:05:23] Hello infinity supporter
[06:28:24] Change the directory to program files 86
[05:51:37] any body help me cm2 mt2 step or spd 2 dtep open show infinty logo after close
[02:46:50] thank you sir 😊😊😊
[02:03:27] Try.

InfinityBoxTalks 2021-11-05

[22:22:56] Admin any help
[22:22:39] @InfinityBoxBot
[21:21:20] Nokia 225 4g
[21:20:12] ta-1279 unlock network supported devices?
[21:20:03] Hello
[19:58:24] Pls
[19:58:22] Wat is d meaning of dis error
[19:57:45] Wat is dis
[19:57:40] Any body
[19:14:00] Served
[19:00:48] Or umt.
[18:31:13] octoplus frp t. point
[18:27:12] KF7 please help admin
[18:07:12] MTK
[17:41:55] Pls
[17:41:52] Read and easybuy with cm2
[17:41:12] Itel s16
[17:38:55] CPU?
[17:25:39] Card found : 7DEF7B43 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Read Firmware [ v2.28 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM15)
MODE : BOOTROM
PO
[17:16:58] ?
[17:04:47] Pls
[16:53:26] Pla
[16:53:24] One should teach me how to read itel s16 and remove joypay wit cm2
[16:52:45] Some
[16:52:30] House
[16:52:28] Helloooo
[15:10:56] 👍
[15:07:48] Thanks solved
[15:00:22] MEGA
https://mega.nz/#!UHokEIRY!ZK0Mo7Usy4xYqKs6p6uTA8H5O-MCHfcwL7YhJb4HjHY
[14:57:34] Cm2 uk off file brouse
[14:56:58] Cm2 uk off file.com
[14:56:17] Bro I need UK OFF
[14:51:19] Lc6 boot?
[14:48:03] SAME error
[14:47:32] Or make it on from dongle manager, or delete it if exist in spd setup folder
[14:46:17] Use uk off file
[14:45:33] Spd uk off
[14:42:52] One click
[14:40:58] latest boot
[14:40:19] ok lemme try
[14:40:08] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
[14:40:04] choose tecno and go to mixed da
[14:38:26] Card found : 43C93F4B , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM7)
MODE : BOOTROM
[14:38:17] tecno bd3 frp failed
[14:33:21] i dnt have at hand right now i only have damaged one
[14:32:04] i dnt have bro
[14:30:48] I have it but expired, I\'m gonna update it!
[14:29:57] It is UMT tool please
[14:29:43] All of the new Qualcomm Samsung phones
[14:29:39] is it free tool?
[14:29:11] Does Qcfire support latest Samsung devices?
[14:27:30] Qcfire work because cm2 Qlc can\'t do it. They should upgrade it as well
[14:26:07] read from working one
[14:25:40] read from wor
[14:22:41] Device info :
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 41115
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-09-05
Build Time : 11.10.2021
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03
[14:22:14] U963 NVM file
[14:22:05] Try combination method
[14:19:06] qualcomm
[14:18:48] What CPU ?
[14:17:43] a025f frp remove help
[14:01:56] Card found : 42A51EFD , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : USB Serial Device (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Ski
[13:56:38] pls the firmware needed
[13:46:59] Boot selection!
[13:45:46] help me pls support.......its urgent!!!
[13:44:50] other boot from?
[13:39:11] Try other boot number!
[13:31:47] pls help me
[13:31:33] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[13:31:27] tecno pr651h failed to identify
[13:09:48] 👍
[12:59:49] REALLY CM2 GREAT TOOL

Operation : Reset SimLock state [ v2.28 ]
SECBackup : Enabled

1. Make sure device is powered off. Power off, if need. Wait 20 second shh after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RA
[12:24:06] PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN [RAPHAEL]
BROM : MEID : BF10448ED711F30FAC8A13545DD78949
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 898FADE29D44B99CED71A88FBDB2D8E808D94B0EBA584E13BA09B32484056E8E
BROM : SLA : Local Auth
BROM : S
[12:21:56] as OPPO Reno5 Lite repair imei
[12:14:29] what is the word which is write here to register
[12:02:08] inboxxx
[12:01:55] Tecno spark 7p
Factory File refuse to read from the phone (backup file)
[11:47:38] anyone with the file
[11:47:25] Device info :
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 41115
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-09-05
Build Time : 11.10.2021
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03
[11:41:17] Please what could be the cost of this tecno spark 7p
Error when reading files from the phone
[11:38:02] Model
[11:34:30] Is it possible to remove payjoy on tecno ?
[08:27:15] is good
[08:26:21] Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : BD2p-SP613DEF-RGo-OP-210619V6.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
[08:09:36] https://forum.gsmhosting.com/vbb/f296/nokia-c10-ta-1342-format-fs-reset-settings-done-2993430/
[08:09:13] https://www.martview-forum.com/threads/nokia-c10-ta-1342-format-fs-reset-settings-done.53643/
[07:30:25] once connected it boots up and hangs on waiting device , after some seconds it reboots then check SVC occurs but doesn\'t complete , its just start charging
[07:30:03] once connected it boots up and hangs on waiting device , after some seconds it reboots then check SVC occurs but doesn\'t complete , its just start charging
[07:29:51] Hope Formatting the phone won\'t make it stuck on logo?
[07:27:26] nop it doesn\'t
[07:08:04] this is what happens when ever i try to read it
[07:07:43] Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...

>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
[06:49:07] https://www.martview-forum.com/threads/huawei-frl-l22-y9a-fixed-oeminfo-read-firmware-done.53641/
[06:43:51] https://forum.gsmhosting.com/vbb/f296/huawei-frl-l22-y9a-fixed-oeminfo-read-firmware-done-2993425/
[06:26:01] hello everyone looking for nv file
[06:25:32] Device info :
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 41115
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-09-05
Build Time : 11.10.2021
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03
[06:18:25] Need Vivo y90 (1908) mt6761 sp9832e imei repair solution
[05:56:49] Flash file for A217f can be flashed in A217f U6 ?
[05:43:06] Qualcomm any update v1.16 only?
[04:44:21] Infinity team can u add the option to remove adimin lock
[02:23:27] Inbox i help you out
[02:11:47] hey boss lg d855 is dead with infinity box what to do plz help me
[01:27:18] can anyone help me reset lg d855 g3 with infinity box dongle
[01:25:34] not really bro
[01:10:49] With my experience it doesn\'t even connect via diag mode
[00:07:26] Hi, Sorry for late reply..have you been helped out?

InfinityBoxTalks 2021-11-04

[22:51:02] nokia c1 2nd edition ta 1380 android 11 cant be unlocked using cm2. even service mode not working help
[19:18:12] do that
[19:17:32] 🤔🤔🤔
[19:15:47] Hi
[19:14:05] Make a format+frp and then change IMEI (your phone is on IT policy)
[18:58:18] when you try hard what is the msg you receive
[18:57:13] Use cm2
[18:56:22] Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : BD2p-SP613DEF-RGo-OP-210619V6.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
[18:25:58] ok
[18:20:57] Bro hard reset not working
[18:18:44] Please share FRL-L22 - L23 Y9a Calibration data or oeminfo
[18:08:41] inbox
[18:02:29] This is the solution to your concern
[18:00:05] otherwise this phone is locked, hard reset using the volume and power keys
[17:35:18] Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : SC7731E_eMMC_AUTH_1GB_1S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!

[17:30:08] frl-l22 l23 oeminfo wanted
[17:15:39] help me here please admin
[17:06:10] I am sure that this problem will have a solution from you
[16:29:58] What?
[16:28:44] ni
[16:04:37] Any solutions
[16:04:14] Hello team, oppo A15 need screen lock remove without data loss
[15:54:29] But say is unlocked
[15:52:28] Showing emergency calls only
[15:51:39] Admin Nokia C20 unlock issue
[15:50:51] SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.201005.001 V1.270_B01 release-keys
Platform Version: MOCORTM_20A_W21.15.3_P7_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_20A_W21.15.3_P7
HW Version: sc9863A_modem
CMP_Time : 06-08-2021 11:05:19

MODEM TAG : MOCORTM_20A_W21.15.3_P7_Debug_4G_MODEM_20A_W21.15.3_P7_sc9863A_modem_sharkl3_pub

NVMng : SecurityInfo
IMEI[1] : 356748977850886
IMEI[2] : 356748977850894
WIFIMAC : 44917C1D041D
BT_MAC : 44917C1D041
[15:50:51] Card found : D34629EC , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Open : LAVA_
[15:07:35] https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=433850
[15:00:47] I need unlock realme c3 rxm2020
[15:00:21] I need unlock realmente rxm2020
[14:55:35] I HAVE THE SAME PROBLEM TOO.
[12:37:18] Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( \'*\' )

Wait for phone...
Phone found! [ 48 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : C37410CB40FF536F504DAA5208FC7051
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare
[12:36:12] tecno 528
[12:36:06] Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 48 ]
Sync...

Initial Boot Failed!
Error while getting BaseBand Info!
Check battery/Cable , try again!
Boot Error!

Operation Failed
Elapsed: 00:00:08
Reconnect Power/Cable!
[11:53:56] Im looking for remove payjoy on tecno camon 7pro
[11:53:21] Hi
[11:37:38] 30% of power to correctly power in meta!
[11:12:50] Mtk brom mode drivers
[11:04:41] Nvram for tecno b1p plz
[11:00:04] job done
[10:59:46] 👍
[10:59:37] yah sure thanks alot
[10:58:19] done thanks alot
[10:58:05] i was keep holding tp
[10:57:43] Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM72)
MODE : BOOTROM
PORT : 72
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN [RAPHAEL]
BROM : MEID : C1851CA2FB6CBB701FB3ED1C2071F97D
BROM : SecLevel : 0x000000E5
BROM : Sec
[10:51:23] getting this error
[10:51:11] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM72)
MODE : BOOTROM
PORT : 72
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN [RAPHAEL]
BROM : MEID : C1851CA2FB6CBB701FB3ED1C
[10:46:37] Help me nvram fo tecno b1p
[10:38:46] ok thanks let check
[10:33:37] oppo f9 pro password unlock
[10:28:54] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM71)
MODE : PRELOADER PORT
PORT : 71
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN [RAPHAEL]
BROM :
[09:29:09] I see it\'s the only thing that\'s blocking me
[08:54:55] How can i pass wi-fi onTecno s1s
[08:17:53] Use v10.1816.001
[08:17:47] What version are you using?
[08:16:18] Mauimeta failed to put it in metamode
[07:53:09] Ok
[07:49:59] Try mauimeta latest version
[07:49:08] Cm2 failed to write imie
[07:48:37] Try write imei fisrt
[07:46:12] Yes
[07:45:57] Is baseband ok?
[07:44:30] Try to flash it by ticking
\"Update PMT and security (nvram)
[07:43:04] It\'s necessary to keep securely backup files otherwise you will get difficulty
[07:42:04] I checked its not there
[07:40:56] Look for it in backup folder ,
[07:38:41] I did backup,but after cm2mt2 2.27 failed to flash it i updated to cm2mt2 2.28 and backup hàs gone
[07:36:59] You didn\'t buckup nvram ?
[07:35:24] Mdm restrictions
[07:34:24] What was the problem before flashing?
[07:30:57] Help me members customer is on my neck
[07:21:52] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM21)
MODE : BOOTROM
PORT : 21
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : D9713B9DA445E8CD10275141098383A8
[07:16:03] Alcatel 5007u no service after flash with cm2 help me members
[07:01:23] pls share preloader
[06:52:52] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM21)
MODE : BOOTROM
PORT : 21
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : D9713B9DA445E8CD10275141098383A8
BROM : SecLevel : 0x0
[06:41:34] Oppo CPH1725 need firmware, help me
[06:10:15] 👆👆👆
[06:09:07] when i change options that\'s what i see
[05:49:35] after reading the information here is the message I got
[05:42:47] How to solve the problem
[05:22:32] Hello,,,read NV error
[05:20:59] Spd,,,realmi bot update plizz
[05:12:49] CPH2179
[05:12:13] OPPO A15

InfinityBoxTalks 2021-11-03

[23:32:28] Yes
[23:32:21] Yes
[23:27:58] Admin please
[21:30:07] https://www.martview-forum.com/threads/xiaomi-redmi-9a-dandelion-repair-security-done.53596/
[21:29:59] https://forum.gsmhosting.com/vbb/f296/xiaomi-redmi-9a-dandelion-repair-security-done-2993311/
[19:43:36] Vivo y90(1908) Mt 6761 same chip not work , what problem?
[19:43:05] Vivo y90(1908) Mt 6761 same chip not work , what problem?
[19:37:11] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : S
[18:04:11] mtk.
[18:03:50] chip model?
[17:59:03] help, how can i remove flyme account on meizu model phones with cm2?
[17:26:24] İtel p37 frp file
[15:16:23] sSLA where can find it
[15:09:47] oppo a7x frp any help
[15:09:25] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM26)
MODE : PRELOADER PORT
PORT : 26
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN [RAPHAEL]

[14:20:58] https://forum.gsmhosting.com/vbb/f296/xiaomi-redmi-9a-dandelion-smart-reset-done-2993273/
[14:20:49] https://www.martview-forum.com/threads/xiaomi-redmi-9a-dandelion-smart-reset-done.53581/
[14:13:44] TECNO BC2c NVRAM
[11:48:38] 😂😂😂 oky Sir
[11:47:51] 😂😂😂
[11:46:29] even 5-6 hours. oky im wait
[11:34:11] oky
[11:32:33] Yes But i make unlock 1 hours later for 2 mobiles
[11:30:13] For 2 mobile today
[11:28:18] I\'m trying to unlock the C10 but it just cut the credits and it\'s been 1 hour it\'s not completing the process.... Any problem with the server?
[11:19:12] Vivo y90 (1908)mt6761 imei repair solution please
[11:10:45] Vivo y90(1908) imei repair solution , please help!
[10:58:48] Thanks
[10:42:36] 4a@
[10:41:09] Select chip 9832E
[10:32:09] itel s16 frp cm2 any help?
[10:30:39] What ?
[10:25:46] Tee
[10:24:42] itel s16 frp help
[10:23:33] s 16 frp file help
[10:21:05] Okey
[10:18:34] Brings up that error
[10:16:43] I downloaded from your sever
[10:16:12] Help me alcatel 5007u nv files . I lost the bacup after install cm2mt2 2.28
[10:15:24] Yes
[10:15:10] Or someone send me .fg file for neon ray pro please
[10:14:24] Only two models exist while I need to add neon ray pro
[10:13:28] How do I update sp2 to bring all boot files ?
[10:09:02] Alcatel 5007u nv backup by cm2 needed
[09:53:01] ??
[09:52:56] Hello is nokia ta1342 suported unlock
[09:50:39] Hisence e40 lite loader file for frp remove ??????
[09:20:40] Work done. Thanks
[08:23:27] Must say completed? Or will return something?
[08:23:26] Cm2 all setups not running
[08:23:05] Ok. I did checked and said. Executing
[08:15:28] Nokia C2 flashing anyone with solution?
[08:07:05] I have this same issue 😒
[08:06:54] Estou tentando desbloquear o Nokia c20 usando a ferramenta cm2. Consumiu 5 créditos e o referido trabalho foi submetido. Devo esperar 10-15 minutos. Mas já faz 1 hora. Ainda dizendo o mesmo. Qualquer ajuda?
[08:05:58] I\'m trying to unlock a Nokia c20 using cm2 tool. It consumed 5 credit and said work submitted. I should wait 10-15 minutes. But it\'s 1 hour now. Still saying the same. Any help?
[08:04:36] Hi
[07:58:36] Hi sr
[06:58:01] With cm2?
[06:15:35] Operation : Repair Security [ v2.28 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6582 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
B
[06:04:34] https://mega.nz/file/xgAT1KYZ#uc3O7LkkAdsNEf3D7EX99wwoWnQkurvfYROnN1Sqe5I
[06:02:11] Hello help me to repair IMEI on this phone
[06:01:22] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6582 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM :
[05:23:55] Any help it was lock to easy buy

InfinityBoxTalks 2021-11-02

[23:53:53] Haga backup de nvram
[20:32:50] Hisence e40 lite need loader file for frp reset on cm2 ?
[20:18:47] PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 241A6BE4E97A4730D44AB421828B12B6
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : Alcatel : Tablet | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...

[20:17:43] Card found : ABC87C3D , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : S
[19:55:50] How will u use it
[17:12:26] Who has solution please help me
[17:11:24] Cm2mt2 can\'t backup android 11 firmware
[16:31:13] I have clone firmware
[16:21:11] Hello i need to this firmware
[16:20:47] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6583 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM :
[15:57:19] Please can anyone help me with techno camon 17 da
[15:55:27] PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : Gionee : S9 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGEN
[15:55:25] PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : Gionee : S9 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGEN
[15:55:25] pls how do i remove code or password lock on gionee s9
[15:27:50] Ok sir thank you
[15:25:03] No sir am just waiting your reply to done that job
[14:54:26] Da
[14:52:12] Plz how to use boot search for cm2 file link on telegram?
[14:51:37] Order/Transaction ID: 980251/1269654....hello sir please check the status
[14:19:49] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : FULL FACTORY ( WIPE + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x
[14:19:02] finaly done using preloader of STYLO S40 LIFE
[14:18:24] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BRO
[14:05:32] {\\rtf1\\ansi\\ansicpg1252\\deff0\
ouicompat\\deflang3084{\\fonttbl{\\f0\\fnil\\fcharset0 Calibri;}}
{\\*\\generator Riched20 10.0.10240}\\viewkind4\\uc1
\\pard\\sa200\\sl276\\slmult1\\f0\\fs22\\lang12 === DongleManager [Infinity] v1.88 [2021-11-02 09:25:12] ===\\par
Box/Dongle type selected: Infinity-Box/Dongle [CM2]\\par
Card-Reader: Gemalto e-gate Smart Card 0\\par
HWID: 000220CF00001942\\par
=== Started: 2021-11-02 09:25:12 ===\\par
Connecting to server...\\par
Connection successfully established\\par
Checking DongleMan
[13:58:24] Mdm lock
[13:37:17] it has just died bse of failing to flsh
[13:36:34] no
[13:36:22] alcatel u5007
[13:36:02] alcatel fail to flash
[13:35:43] PTFN : MediaTek USB Port (COM12)
MODE : BOOTROM
PORT : 12
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 340A188058FFB0E66DD0A9DA46DBAE49
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : C2EE5D826E90F71F9EF327B4C8C1F8ABD9BDC6C4D7103D978545E061AB315F60
BROM : SLA : Local Auth
B
[13:35:43] [FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000000800000
Erase : 0x0000000001000000 : 0x0000000004200000
Erase : 0x0000000006A00000 : 0x0000000002600000
Erase : 0x000000000B000000 : 0x0000000007800000
Erase : 0x0000000014000000 : 0x0000000000800000
Erase : 0x0000000017800000 : 0x0000000010000000
Erase : 0x0000000028000000 : 0x000000014F800000
Erase : 0x000000005A100000 : 0x00000001F8F00000

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing now ...

Write : PRELOADER
Update bootloader ba
[13:35:43] Operation : Write Flash [ v2.27 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :30
[FL] : Set : preloader_k62v1_32_bsp.bin
[FL] : Set : recovery.img
[FL] : Set : recovery.img
[FL] : Set : swversion.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : efuse.img
[FL] : Set : md1rom.img
[FL] : Set : tinysys-scp.bin
[FL] : Set : tinysys-scp.bin
[FL] : S
[13:22:46] Teno frp problam with pac file
[12:57:57] Is it possible to repair IMEI Oppo A1S?
[12:57:48] Is it possible to repair IMEI Oppo A1S?
[12:57:47] Is it possible to repair IMEI Oppo A1S?
[12:57:43] Is it possible to repair IMEI Oppo A1S?
[12:57:25] Need help please
[12:57:21] Hi all
[12:14:10] I made exactly but the same mistakes
[10:56:03] Direct Unlock what? BL? LOL
[10:52:36] direct unlock with octoplus or umt
[10:43:31] Sorry offtopic need this file

https://easy-firmware.com/index.php?a=downloads&b=file&id=365178
[09:49:50] i copy this from forum i dnt know how it was done
[09:49:14] Hi, Finally It has done thanks to Infinity Box Team

Operation : Reset Settings/Format FS [ v2.21 ]
Mode : FULL FACTORY ( WIPE + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : MEID : FDF
[09:48:10] i did sir but i think this file i download is wrong
[09:40:28] im getting this error
[09:40:21] thanks so much worked 100%
[09:40:13] PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
[09:40:12] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BRO
[09:37:06] ok thanks let me try
[09:30:58] stylo bold plus DDJ18
[09:30:10] EMI : DEV : MT6752
EMI : SRC : preloader_k80hd_bsp_fwv_512m.bin
EMI : CNT : 0003
EMI : [00] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 0 B ]
EMI : [01] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 1.00 GB ]
EMI : [02] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 1.00 GB ]

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Wai
[09:26:15] i need help asap............................................support pls helpme out
[09:25:52] itel w6502 frp!!!!!............................................................................thats the error i get after ur pac 3mb file
[09:24:48] VER : BP_R1.0.0
LEN : 00368EC4 ( 3.41 MiB )
CPU : sp7731e_1h10
VER : W6502

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
S
[09:19:24] hello everyone any solution to my problem
[07:58:10] how bro cz im stuck with emi and da file
[07:57:30] use memory tool
[07:51:55] need help
[07:51:50] hello team stuck here STYLO BOLD PLUS DDJ18 removing payjoy acc
[07:50:42] PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : X_FireFly | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
[07:50:33] PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2044 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
[07:50:33] Reconnect Power/Cable!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM
[07:50:33] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : FULL FACTORY ( WIPE + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x
[06:46:29] https://androidfilehost.com/?fid=7161016148664832243
[06:26:31] q
[06:24:54] Serch in flash file section not available
[06:24:07] Nokia rm969 059v107 file need
[06:09:14] Great team 👍 and fast reply
[06:08:21] Welcome bro 😉
[06:06:43] Cm2 is king of the all box
[06:06:20] For oppp and other mobile pin unlocking please give a big update
[06:05:47] Infinity supporter Qualcomm any updates
[06:01:11] Cf7k work with another file, the file from infinity site has bad preloader, this the first time I download that doesn\'t work from infinity site, may be admin should replace the file with this one to safe other person.
https://drive.google.com/file/d/1wGEf_jSIQHcdGQizxTbVnqUXnErLDhEz/view
[05:25:51] Come inbox bro.
[05:21:19] My account expire
[05:20:26] What do you intend to activate?
[04:42:49] yes just contact resellers
[02:43:01] How to active

InfinityBoxTalks 2021-11-01

[23:31:19] Ok
[23:22:21] Moi j\'ai fait le backup du ficher avec nck pro.... J\'ai reflashé Avec le ficher backup ...quand on l\'allume ça s\'arrête sur itel... Maintenant j\'ai pu flashé ça avec cm2.
[23:21:03] android 11 not support any tool
[23:19:36] Do you know Atchoukpa ?
[23:19:17] Si non 2 type de fichier pourtant même chose
[23:17:51] how you were able to succeed in your case.
[23:17:41] CM2 EFT pro
[23:17:06] Quand j\'essaie c\'est le msg d\'erreur que je vois
[23:17:04] Tu nck pro ?
[23:16:22] . non ça n\'a pas marché
[23:15:57] Tu as pu flashé ça non ?
[23:15:41] Je l\'ai déjà réussi une fois...
[23:14:43] Yes
[23:13:54] Do hear franch langage ?
[23:12:44] 👆👆👆
[23:12:36] Try format+flash
[23:11:47] but the same problem persists
[23:10:24] Congratulations
[23:10:01] Yes boss
[23:07:13] Job done ?
[23:06:45] It is done
[23:05:50] Now format it
[23:05:09] it is done
[22:47:19] Read info first
[22:40:43] Yes
[22:39:47] Oui
[22:39:01] If your dongle still get activation
[22:38:28] OK use spd module
[22:37:42] it\'s sc7731e
[22:36:11] 👆👆👆
[22:36:01] Easybuyer ..( contry lock) use cm2 mt2
[22:35:35] this is the error massage that I see when I try to Flashé
[22:03:43] Oky My Boss
[21:58:26] is possible to get infinity 5 credits or 10credits?
[19:59:00] HMD service on 🔥🔥🔥
[19:57:32] Or screenshot
[19:57:15] Post the log
[18:02:49] android 10 or 11
[17:55:28] itel w6502 frp cannot remove yet......pls help
[15:57:01] avoid installing antivirus such as smadav, avast, keep windows defender disabled.
[15:56:09] your module has been corrupted with virus, please install it again.
[15:47:33] What\'s the problem all the time?
[15:39:07] re-unlocks after your order is accepted or completed, waits for the server.
[15:18:31] Inbox me
[15:15:47] huawei bg2-w09 frp
[14:42:06] after that is not imaginary.

because they are even bad for making jokes
[14:01:17] model no aint there bro, pls check
[14:00:40] You\'re good to go
[13:59:40] cm2sp2 2.14
[13:59:25] What version is yours
[13:59:15] You don\'t have latest software
[13:57:57] model no isn\'t there, what version are you using?
[13:57:55] Download it this
[13:55:22] Download this pac select from fdl
[13:52:52] Is there
[13:52:36] no model no on cm2sp2
[13:52:08] Select model and remove it with cm2 sp2
[13:51:00] i need help to remove it......how??????
[13:48:52] What happened
[13:47:52] Itel w6502 frp remove help guys!
[13:27:19] Then try Again?
[13:24:42] I should wait Until its say complete?
[13:22:20] For cm2
[13:20:58] i need this options and the user same
[13:20:44] you should add this option in mtk module samsung

- unlock and relock bootloader
- erase nvram (auto one click)
- add restore imei and patch network(for samsung)
- Add button SAmsung KG
- Add button read Rpmb
- Add button write Rpmb
- Add button erase Rpmb
[13:20:19] Itel w6502 frp file pls
[13:08:27] I should disconnect then try Again after 15?
[13:06:11] What i should do here
[11:37:02] ok
[11:36:22] cm2 not support mtk unlocking bro
[11:34:08] stylo s40 life sp unlock help please
[11:33:30] Operation : SP Unlock [ v2.28 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM47)
MODE : BOOTROM
PORT : 47
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : F9885EC9FAB783A76206D3CC0D88214D
BROM : SecLevel : 0x00000000
BROM : SecMod
[10:21:17] Any help
[10:19:19] How can I solve this
[09:41:05] cph 2021 infinity dongle frp reset done
[08:59:17] yes
[08:55:26] bsi way????
[08:51:24] Itel p36
[08:46:53] or check bsi ways if connect
[08:44:12] tried neon ray pro and need server credit
[08:42:31] ok
[08:42:12] change battery first
[08:26:12] is there any way to fix it
[08:25:27] KB7J dead failed to flash
[08:25:09] PTFN : Miracle USB Port (COM76)
MODE : BOOTROM
PORT : 76
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : F97738E67810DFACB6E41CB1931823F8
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 4F8F8E3F122FDBAFB71A07D188AD67D93F9F0C2BF2494EB7B0F33B095FA0C1FE
BROM : SLA : Local Auth
BROM :
[08:25:09] Card found : 1D79BBEC , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v98353 Ok!

Update configuration ...
Update Ok!
Load IDBase v98353 Ok!

Preloader [HW DEV] Info :
EMI : DEV : MT6761
EMI : SRC : preloader_kb7j_h615.bin
EMI : CNT : 000A
EMI : [00] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
EMI : [01] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [02] : eMMC :
[07:44:21] Dm me
[06:39:12] [FL] : RePartition
ERR : 0x000013CD
ERR : DL : PMT ERROR : NO SPACE
ERR : 0x00000000|0x00000000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!

sir help what the ploblem.
[06:39:11] Card found : 42A51EFD , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.27

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Preloader [HW DEV] Info :
EMI : DEV : MT6752
EMI : SRC : preloader_k80_bsp.bin
EMI : CNT : 0003
EMI : [00] : eMMC : DDR3 : ID : 150100464E36324D42 : VEN : SAMSUNG | DEV : FN62MB : RAM : [ 1.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 700100454838454538 : VEN : KINGSTON
[05:37:03] Oppo A9?
[05:16:10] Any one with backup nvram for oppo ch1938
[03:38:05] ????

InfinityBoxTalks 2021-10-31

[20:23:53] For add support to Samsung a31
[20:23:37] Need help
[19:29:29] Just load the file and flash no need any loader for flashing, loader is already inside pac
[19:13:17] use this loader
[19:05:14] Bashir Dan Mallam:
How to flash itel p37, p651l with cm2 please,I download the file oredy

For infinity support

No itel p37 model for cm2 setup
[19:04:59] Hello
[19:02:34] No itel p37 model for cm2 setup
[18:59:18] For infinity support
[18:59:08] How to flash itel p37, p651l with cm2 please,I download the file oredy
[18:13:40] GIONEE GN5007 firmware please
[18:13:09] PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : Gionee : S9 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGEN
[18:09:19] PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : Gionee : S9 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGEN
[18:07:28] pls how do i remove code or password lock on gionee s9
[17:33:01] ?
[17:32:44] can I use GN5007L for GN5007
[14:42:50] Thanks bro job done
[14:27:21] Ok let me try it bro
[14:26:28] 7731e 2gb RAM Cm2 full support
[14:20:30] 10
[14:19:02] android 10 or 11
[14:18:00] Itel
[14:17:38] tecno ?
[14:16:19] Help me
[14:16:10] P651w frp loader
[12:28:58] 🙈
[12:19:41] Yes
[12:19:25] No convert put just file in boot repertory
[12:12:40] How to convert spd2 read file to pac file
[12:12:23] Hi
[11:25:04] 👆👆👆👆
[11:24:48] ??
[11:18:33] t.point connected?
[11:17:16] Error for read info
[11:17:07] Need support for Samsung a31
[11:04:16] Some body help sunstone driver
[11:03:43] Allo
[11:02:58] Plzz,,photo
[11:01:59] I don\'t understand
[11:00:11] Madell
[10:59:14] I can\'t create license on Infinity nokia best, it hang when try to create and nothing in my email, help me please.
[10:58:32] I pressed the IDENTIFY button first, to no avail
[09:25:40] firmware I don\'t have, cm2 activated I have.
[09:24:20] you do have firmware with cm2 activated?
[09:15:54] help flash file mobicel switch go.
[08:19:41] Check infinity support
[08:17:48] Pls help me firmware infinix x657b
[06:37:33] its paid version
[05:57:48] Which box and what is boot key
[05:57:30] How to unlock
[05:28:59] only server can do
[05:27:38] ummm so i have to try Qualcomm not with mtk right?
[05:26:28] redmi note 8 Qualcomm
redmi note 8 pro mtk
[05:23:58] but dont know how to connect phone with it
[05:23:41] dont talk about other boxes. infinity supports it
[05:20:01] if I talk about other boxes I won\'t be banned? And that this group seems to me like infinity.
[05:17:22] umt.
[05:17:07] dose not connect with box
[05:09:46] test point.

InfinityBoxTalks 2021-10-30

[23:32:04] How to fix ussd on s5 sm-g900k?
[22:35:58] help remove redmi note 8 MI account plz
[19:14:37] Regardez \"Tecno pop 5 BD2P Android 11 frp and security code bypass done by CM2 2021 (firmware + flash file)\" sur YouTube
https://youtu.be/mKnf4O_riw8
[18:57:59] Help remove frp tecno BD2P spd
[18:57:22] Update still same error
[18:48:45] use 2.28 windows 10
[18:45:05] BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : Oppo : F7 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_BR_HIGH.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007024 : DA SEND ERROR!
ERROR : SECURE BOOT : SELECTE
[18:23:51] log
[18:16:12] 😂😂
[18:03:28] Oppo f7 smart rest fail help guys
[17:36:36] Hii , who with infinity box cm2 spd tool to convert a pac.sc file to pac format !!! I hope someone can help me !!!!
[16:30:11] How I Will Do It I wouldn\'t understand Please tell me the remote
[14:48:10] This took 2 years
[14:45:24] Please I try to launch my CM2SP2Tools, this is what it was showing, and I even download the DONGLE MANAGER and update the dongle it was showing your dongle is updated, please help about this
[14:43:53] Pls help me firmware infinix x657b
[14:32:46] Please help me
[14:31:52] InfinityBox CM2SP2 on open
[14:31:15] hello
[14:03:17] How to use cm2 on those nokia phones bro
[13:59:54] imei repair
[13:59:50] redmi note 7
[13:55:38] Wipe FRP By Memory Tool?
[13:49:31] CPH2251 (Reno 6 5G) (Android 11) FRP Removed But Still Exist In Device...
[13:48:35] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM21)
MODE : BOOTROM
PORT : 21
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Montrose
TYPE : MODERN [RAPHAEL]
BROM : MEID : D8876CCA4041F17
[13:46:21] Cm 2 bos coz this is Qualcomm cpu
[13:45:01] Com
[13:44:29] Them what do you wnt to archive
[13:44:18] Wich Nokia is your one
[13:43:31] Cm2
[13:43:10] 👆Which box can work on those phones
[13:41:38] If you dont know send me anydesk i help you fast
[13:41:12] Yes
[13:40:48] is Android 10 bro 7731e 1gb ram
[13:40:14] P36:frp
Cm2 work 100% one click
[13:38:27] Can cm2 remove the frp
[13:37:31] Ya its 9
[13:36:58] I think is 9
[13:36:48] I don\'t know ooo
[13:36:30] p36 is Android 8 or 9?
[13:35:42] Can cm2 do it
[13:35:26] Frp
[13:35:23] Itel p36
[13:15:29] no bro.
[13:04:43] i unlocked C20 today it took less than 30 minutes
[13:03:15] CALM DOWN.
[12:58:50] yes bro.
[12:57:54] Real??
[12:54:16] done.
[12:35:02] patience friend you have to wait there is no other solution the day before yesterday i went through this when i had to wait
[12:32:26] thats good to hear
[11:36:22] THX INFINITY TEAM FOR YOUR HARD WORK (no cm2 no life) cm2 dongle did for me big miracle today. ❤️
[11:20:45] any help?
[11:20:39] nokia ta-1288 userlock
[09:59:13] Thanks
[09:42:34] I\'ve been trying to unlock Nokia C10 for almost 2 wait it keeps giving work submitted feedback
[08:47:54] Is unlock server online today?
[07:22:41] https://youtu.be/AT-lsTC7PiY
[07:20:55] https://youtu.be/MJ4zje-DMh0
[07:18:59] https://youtu.be/csu3tlo5IJk
[06:08:37] Dial key
[04:50:50] http://www.mediafire.com/file/0xgn9o0b711wcw0/Nokia_1_TA-1047_MT6735_V8.1.0_180401.zip/file

InfinityBoxTalks 2021-10-29

[21:16:14] ☝️☝️☝️
Reseller in Nigeria
[21:14:45] Hello i need to dongle manager latest version link
[21:04:05] Ok
[21:02:01] Mobile contact or email?
[19:25:49] Can give u a reseller contact in nigeria
[18:11:00] hisense u30 sp unlock code
[16:26:12] Not working
[16:21:16] or short tx and ground
[16:20:16] Ok
[16:19:45] Ic touch avaz konam?
[16:19:09] Manzoram ine chi kar konam dorost she?
[16:18:58] 😎😎
[16:18:41] 🙄🙄
[16:18:31] hold all keys by two hands except power key
[16:18:24] namad
[16:18:11] Khob chi konam
[16:17:50] ein m3
[16:17:34] yes
[16:17:22] Migan sakhtafzari narmafzar rah nadareh
[16:16:44] ok pas okeyesh kon :)
[16:16:24] Ali i am repair man
[16:15:52] hi going to mobile repair man
[16:11:57] Hi friends how to fix t295 touch problem after update?
[16:11:35] Try every key one by one
[16:03:24] Spd
[15:14:40] Itel p15 failed on U boot
[15:05:20] Operation : Identify [ v2.28 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM17) MODE : BOOTROM PORT : 17 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200 CODE : Merlot TYPE : MODERN [RAPHAEL] BROM : MEID : D210DF342942B7076168B0A73DA5DF46 BROM : SecLevel : 0x000000E7 BROM : SecMode
[15:03:45] Operation : Identify [ v2.28 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM17) MODE : BOOTROM PORT : 17 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200 CODE : Merlot TYPE : MODERN [RAPHAEL] BROM : MEID : D210DF342942B7076168B0A73DA5DF46 BROM : SecLevel : 0x000000E7 BROM : SecMode
[14:45:56] Nokia 2.3 Ta-1206 after unlock network Emergency call
Help please..
[14:39:10] Please help
[14:38:51] Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : False
Setting : SlowSparse Fix : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Sp
[14:31:47] Salam bhai
[14:31:16] NOKIA 1 TA-1047 working file on support I have best activation
[13:34:19] Nokia TA 1312 password any solution??
[13:13:07] Ok
[13:13:00] then update via dongle manager
[13:12:03] There is non
[13:11:37] remove all remote software
[13:10:53] Smarcard misconfiguration , how to fix ?
[12:52:19] Not possible i guess🤔
[11:51:21] hello sir
[11:33:50] which code is needed
[11:26:19] on my side i have uninstalled even anydest uninstalled eitima as the report say but still error 66 wen i open dongle manager n try to update firmware 0073726EA8 my dongle
[11:24:49] OK bro waiting
[11:02:06] Sorry no reseller that is from Nigeria on the list
[11:00:12] I am not used sir useless world.
Sorry for miss understanding
[10:58:49] I mean the CM2 DONGLE
[10:58:34] I try but not soul my problem.
I try my frend PC
Is perfect working.
Only problem in my PC.
[10:58:15] what do you mean?
[10:57:53] Hello, pls how can I get another CM2 TOOLS which is updated in NIGERIA here
[10:57:11] Like Sam problem. Not open tool.
No eny error
[10:56:18] admin, we still waiting this firmware
[10:55:49] Not showing tool
[10:55:37] Sam problem
[10:54:57] Already try
[10:54:27] Plz help me
[10:54:18] No error
[10:35:12] Please someone help me with the download link of this file https://support.halabtech.com/index.php?a=downloads&b=file&id=157657
[10:25:11] Nokia C1 2E TA-1380 how do you put into diag mode?
[10:02:04] Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Box/Dongle misconfiguration
Diagnostic code: 66
Username: 0034EC1EC9
==> Scan C:\\Users\\gsm butichi\\Desktop\\DongleManager for report.log
==> Scan c:\\Program Files for report.log
==> Scan c:\\Program Files (x86) for report.log
Found files: 0
==> Scan C:\\Users\\gsm butichi\\Desktop\\DongleManager for *.ibin.log
==> Scan c:\\Program Files for *.ibin.log
==> Scan c:\\Program Files (x86) for *.ibin.log
Found files: 0
==> Scan C:\\Users\\gsm butichi\\Desktop\\DongleManager
[09:20:02] Post identify logs in edlmode with QLM
[09:14:22] ZTE-BA603
[09:13:16] Phone pic.
Try to put phone in recovery and post pic.
[09:12:05] I don\'t know oo
[09:10:45] Wait
[09:06:34] Model
[09:05:59] Your pase error code was 66 and now it\'s 31. Just click yes and you willl get next instructions.

Just a friendly advice dongle is not a kids playing tool. I saw your past post and you get error now and then. Remember not to use usb sharing software/tools if you use infinity box.
[09:03:48] ZTE showing no cammand off and on
[08:57:41] Can cm2 do Qualcomm do android wipe
[07:18:55] https://t.me/Expert_profissional
[07:14:30] https://t.me/Expert_profissional
[07:10:11] How to delete virus quarantine file delet plz help bro
[07:09:05] I am not used crack
[07:09:00] I have professional all tool
[07:08:40] I have original window bro
[07:08:19] use original Windows or renew it (many virus or cracked box on your pc)
[07:06:22] Admin plz plz help me
[07:06:14] Sam invalid class error 😭
[07:03:34] Plz help me admin
[07:03:27] Not showing any error
[07:03:18] My infinityspd2 and mtk2 not open
[05:40:33] thx upload all 3different build number
[05:21:46] Come
[05:18:38] LOCKED TO VERIZON ANY SOLUTION?

InfinityBoxTalks 2021-10-28

[22:09:17] thx let me waiting other one
[22:03:01] Halabtech is paid and I don\'t have sub package
[21:51:59] Okay
[21:49:26] cd6-h621HO-Q-200310V169
[21:47:46] Okay so which version do you need now
[21:47:25] after flash Web version set dead
[21:47:25] after flash Web version set dead
[21:46:52] I need this version
[21:46:12] You need this version or what check infinity website
[21:37:46] tecno CD6-H6211HJO-
Q -200310V 169

any one has this firmware after flash with infinity firmware set dead
[20:57:56] How to flash this file plz help me
[19:23:45] sprint lock
[19:23:38] wiko u520as
[19:22:42] Operation : SP Unlock [ v2.28 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB VCOM (Android) (COM86)
MODE : MTK USB PORT
PORT : 86

META : Failed to open META channel!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Operation : SP Unlock [ v2.28 ]
Mode : META

1. Make sure device is powered o
[19:02:19] need help
[19:01:46] Operation : SP Unlock [ v2.21 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : MEID : 6A51739587427DC9E40F4CAE105D9F06
BROM : SecLevel : 0x000000E3
BROM : SecMode :
[19:01:46] Operation : SP Unlock [ v2.21 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : MEID : 6A51739587427DC9E40F4CAE105D9F06
BROM : SecLevel : 0x000000E3

[18:41:26] Yes it is working, i jus removed frp
[18:40:26] No online inbox me
[18:39:47] Is it good working phone?
[18:39:47] Yes it is working
[18:26:48] Any solution fo this??
[18:19:31] It stuck on logo but thanks i just flash it with this firmware https://dl3.infinity-box.com/00/?dir=&search=Qnet and all is well now
[18:18:32] CM2SCR
[18:17:54] Thanks i just flash it with this firmware https://dl3.infinity-box.com/00/?dir=&search=Qnet and all is well now
[18:13:19] How to unlock spreadtrum SC6531DA
[18:09:58] What problem in phone?
[17:14:38] Bro
[17:14:11] Its offline
[17:13:39] Just server
[17:13:23] 1322
[17:12:58] TA 1133
[17:06:31] Anybody with test point of nokia 1.4
[15:49:31] Inbox
[15:46:32] i know and i have more credits, i would like to know more before so sa not have unnecessary losses of credits. help please.
[15:44:47] Dankie vir julle hulp. Dankie almal
[15:43:52] Hallo, moenie verveeld wees nie, ek is jammer, ek het \'n vraag gehad oor cm2, waar moet ek die nuutste weergawes aflaai Dankie.
[15:41:12] for purchasing credits Admin will send links for resellers
[15:40:15] you need credits first then use username and password from dongle manager
[15:17:56] HELLO! WOULD YOU LIKE TO KNOW WHAT THE STEPS ARE TO UNLOCK NOKIA C10 AND C20?
[15:05:27] It will work
[14:56:18] Please is vi\'s 11
[14:55:15] Yes
[14:55:02] Cm2mtk2
[14:50:04] Press both volume and connect cable
[14:49:30] Operation smart reset
[14:49:14] Select latest base tick ssl
[14:46:14] Tecno kf7j frp help
[14:45:39] I want to reset BD2p
[14:40:28] Which CPU to use on reset
[14:32:01] How to fix smart card misconfiguration .contact support
[14:31:32] 🤷‍♂🤷‍♂🤷‍♂🤷‍♂🤷‍♂
[14:31:16] I NEED THIS FIRMWARE PLEASE SPARK 5 CLONE Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protoc
[14:31:15] What is its CPU
[14:31:05] Tecno BD2p
[14:30:12] I NEED THIS FIRMWARE PLEASE SPARK 5 CLONE
[12:57:36] Means
[12:49:22] Algorithm was updated days ago and now you can unlock c10 and c20 without any problem. Unlocking some phones need credits and time.
Maximum time is under 20min.
[12:46:01] 😁
[12:45:42] I agree that but I have Nokia C20 that need cradit n phone is not open but I lose cradit
[12:44:38] Some phone requires credits to unlock
[12:43:59] Thank you Mr abhay I read bro but I\'m talik about cradit
[12:43:05] Read the instructions below carefully. Wait 15 min and again unlock the phone.
[12:42:20] Phone is not done but I lost cradit
[11:33:53] Krin 710 not supported
[11:31:16] Huawei p smart supported
[11:04:53] Admin pliz help to solve this error.
[10:46:40] Or give anydesk
[10:46:32] I helo you
[10:46:28] In box
[10:44:20] With which volume key I will hold
[10:43:47] Will I still tick ssla
[10:42:29] Spark 7
[10:42:16] Modèle
[10:41:55] Frp I wanna do
[10:38:08] How can I solve this
[10:14:35] not available
[10:08:52] ‼️‼️‼️‼️‼️
[10:08:06] need this firmware
[10:07:56] MT6580_EMMC_MRA58K__10_0_P40 Pro+_Android_2020_12_21_15_20
[10:07:36] ITEL P651L Firmware help me with it????
[10:00:43] pliz help this issue.
[09:18:09] IMEI[1] : 358101860010291
ID0 : Lock : Locked! | MNC : 768 | CNT : 4 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000
IMEI[2] : 358101860010309
ID0 : Lock : Locked! | MNC
[09:18:09] Operation : SP Unlock [ v2.28 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM31)
MODE : BOOTROM
PORT : 31
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 2A19F374CCDEDE3C118AAA9623039950
BROM : SecLevel : 0x00000000
BROM : SecMod
[09:17:08] I made the backup of rom1,rom2,rom3 and wrote back the dump before flashing it.
[09:16:59] Hurricane H61 Network unlock supported ...Android 11
[09:16:29] Operation : SP Unlock [ v2.28 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM31)
MODE : BOOTROM
PORT : 31
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 2A19F374CCDEDE3C118AAA9623039950
BROM : SecLevel : 0x00000000
BROM : SecMod
[09:14:28] The problem was emmc dead,i replaced it and try to flash it again,it finish but can\'t boot.
[08:56:51] Patch Level : LMY47I
Display ID : LMY47I test-keys
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2016-06-01
Build Time : 12.09.2020
Product Model : P40 Pro+
Product Brand : alps
Product Name : P40_Pro+
Product Device : P40_Pro+
Product Manfct : alps
Board Platform : mt6580
Product Info : P40_Pro+
[08:56:50] Need firmware
[08:12:09] am stranded with error since yesterday pliz help fix it .
[07:26:36] Pliz help
[07:02:25] Operation : Identify [ v2.13 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[07:01:03] flash mode not boot
[07:00:11] Operation : Identify [ v2.13 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : itel_L6006_100_0801_080721
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

Platform Version: MOCORTM_18A_ITELQ_W21.09.5_Debug
Project Version: shark
[06:54:06] Card found : 26AB9B24 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM16)
MODE : BOOTROM
PORT : 16
Waiting BOOT ack ...
BR
[06:46:36] Which boot mode will I select Caz all are not working that\'s why I asked for DA FILE
[06:44:35] Hi ta1322 have screen lock
Best2 not suport??solution??
[05:59:30] Press both volume key and connect usb
[05:23:36] Boss can I get this👆👆👆
[05:20:49] Ulefone note7p DA FILE
[01:48:05] Mtk ?

InfinityBoxTalks 2021-10-27

[20:06:14] Android 11 , forget bro
[20:03:30] DM I can do it
[19:50:20] ❤️❤️
[19:49:59] I agree
[19:21:17] Nokia C20 network lock done, well done CM2 team
[16:38:17] Yet found soln
[15:57:35] Huawei p smart network unlock
[15:09:32] How can I send e-mail to support
[14:52:56] Unlock
[14:50:40] Or not
[14:49:28] Supported?
[14:49:11] TA-1182 network
[14:42:25] I have read no fault.bin found on pc ..
[14:33:20] How to restore fault.bin sir
[14:31:08] Ok
[14:29:40] Virtual serial port driver
[14:28:38] Yes I have read
[14:28:02] I have sir but this error has happen today after installing vspd
[14:26:39] Yes
[14:05:07] It has happen again today sir
[13:58:27] God bless
[13:45:35] Done
[12:59:42] Username: 0034EC1EC9
==> Scan C:\\Users\\gsm butichi\\Desktop\\DongleManager_2 for report.log
==> Scan c:\\Program Files for report.log
==> Scan c:\\Program Files (x86) for report.log
Found files: 0
==> Scan C:\\Users\\gsm butichi\\Desktop\\DongleManager_2 for *.ibin.log
==> Scan c:\\Program Files for *.ibin.log
==> Scan c:\\Program Files (x86) for *.ibin.log
Found files: 0
==> Scan C:\\Users\\gsm butichi\\Desktop\\DongleManager_2 for fault.bin
==> Scan c:\\Program Files for fault.bin
==> Scan c:\\Program Files (x86) for fau
[12:39:39] This problem stops my work everytime pliz help.
[12:36:55] Lol
[12:36:41] I need it
[12:32:46] Change boot file and try
[12:31:35] pls
[12:30:26] send it for me
[12:29:16] Infinix PR652B need nvram please
[12:28:04] A02
[12:27:49] frp A022F👍
[12:27:13] how
[12:25:48] Card found : 98E7AB82 , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device,
[12:23:29] Already downloaded a file 👍
[11:40:49] Failed
[11:29:49] Pls is urgent
[11:29:42] Pls someone should send frp file for tecno PR651H
[11:10:05] okay
[11:09:58] WhatsApp ! Me
[11:09:42] how can i solve this mr Yuran
[11:08:58] This phone was flashed KE means Kenia
[11:08:06] Its good to have infinity cm2 box, i just unlocked another c10 in less than 10mins😊😊😊😊, Thanks infinity ♾ team💪👏
[10:41:47] SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L5006S-F3212-10.0-KE-LC-V007-20200619
Platform Version: MOCORTM_18A_W20.21.4_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.21.4
HW Version: sc9832e_modem
CMP_Time : 05-21-2020 12:19:31
[10:41:33] Card found : 646B897E , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L5006S-F3212-10.0-KE-LC-V007-
[10:40:00] flash not running fdl error
[10:33:22] Wait until process finish and Done
[10:33:06] Open Infinity Cm2 SPD2 select Diag Mode and select format EFS.
Turn off your device and connect usb cable
[10:25:45] Any idea?
[10:04:44] Any operation showing thus infro
[10:03:20] DEVICE NETWORK SHOW BUT CAN MAKE AND RECIVE CALL MESSAGE CHECK BALANCE
[10:01:44] Card found : 646B897E , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L5006S-F3212-10.0-KE-LC-V007-
[09:56:51] unlock done but still
[09:53:50] A23 PRO UNLOCK NETWORK
[09:51:50] ur welcome
[09:49:07] Thanks bro it has back to life
[09:08:10] https://blissos.org/
Hey guys, I\'m switching to this amazing android x86 distro called #blissos
[09:04:14] Error code :66
[09:03:19] Qualcomm cpu
[08:57:16] Nokia TA-1205 unlock Halp...
[08:46:56] now restore original IME from bck label
[08:27:03] Factory reset
[08:17:28] What do wnt to archive
[08:15:26] Nokia c1 plus format solution
[08:10:33] Ok
[08:10:21] use this one and tell me result
[08:10:15] Thanks bro
[08:06:34] dm
[07:46:31] I tried many simcard they sau \"no simcard-no service\" i thought its hardware,then i used sim with puk to see if detect cards.
[07:24:31] I think you people should help me nvram for this phone
[07:21:39] Wait until process finish and Done
[07:21:23] Open Infinity Cm2 SPD2 select Diag Mode and select format EFS.
Turn off your device and connect usb cable
[07:15:51] Nokia c20 how to format plz help me
[07:14:36] Here i put sim as you said
[07:13:49] Its here
[07:10:52] Put another sim and show me
[07:06:10] i had a unit with same problem i flashed it with .pac file during flash i ticked on NVM Update then it came back asking for network unlock then i unlocked it now it works perfectly......it cud be damaged security
[06:51:43] I used this sim with pin to see if sim slots are working. I thought it was hardware
[06:43:06] Remove sim one it and show me
[06:42:37] This is sim put code not problème of phone
[06:34:03] Help me bro
[06:13:23] Nokia G20 firmware
[03:36:21] Restart PC it wil be fine
[00:53:42] It\'s firmware is already uploaded to support site. Login to IOS account and download the file.
[00:49:33] Hi 👋

InfinityBoxTalks 2021-10-26

[21:09:56] What do you need
[20:20:06] X658b SPD Loader please
And team please Add infinix spd on CM2SP2
[18:53:26] But username and password have been forgotten
[17:56:13] Infinity is king in gsm field ,there mtk,spd,scr,rkt all modules are awesome I don\'t understand why Qcom update is not yet released
[17:07:50] Please my CM2 MT2 is unable to launch
[16:58:38] And I have downloaded donglemanager to update it yet situation persists
[16:57:21] Please my CM2 MT2 is unable to launch
[15:10:18] Yes i know
[15:09:26] ☝️
[15:08:55] I can do it ?
[15:08:26] Yes
[15:03:36] Operation : Write Flash [ v2.28 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :23
[FL] : Set : preloader_ke5_h6123go.bin
[FL] : Set : tkv.img
[FL] : Set : recovery.img
[FL] : Set : md1img-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verif
[15:03:20] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : S
[15:03:08] Yes
[14:58:11] Tecno KE5
[14:57:33] Hang one logo ?
[14:56:33] ☝️
[14:56:22] ☝️
[14:55:57] It turn on logo
[14:55:36] Yes Is unlocked after 15mins ,,, so if the strong team Infinity took 15mins to unlock c10 how long will it take for other teams like miracle and Nck ..... Answer is 1year😂😂😂
[14:55:36] Help me to flash this phone
[14:54:51] Operation : Write Flash [ v2.28 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :23
[FL] : Set : preloader_ke5_h6123go.bin
[FL] : Set : tkv.img
[FL] : Set : recovery.img
[FL] : Set : md1img-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verif
[14:48:45] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : S
[14:39:23] My problem solved sir.
[14:38:02] Thanks
[13:50:28] Wait
[13:47:35] I have report sir.but result not yet
[13:45:53] Not yet sir
[13:27:27] Thanks.
[13:27:24] Problem is solved, c10 network unlock done by infinity.
[13:07:05] Hello Nokia MTK network unlock
[12:34:38] 🙏 thanks.
[12:34:07] Nokia c10 Unlock is queued.
[12:33:28] Server\'s from cm2 is on?
[11:42:34] Inbox
[11:37:50] Phone has password
[11:33:33] Meizu phone can\'t format via cm2
[11:32:58] I have reported the issue at first.
[11:21:38] Pliz waiting sir.
[10:37:18] https://youtu.be/BWuN1EKFzPk
[10:13:11] https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/index4557.html#post14471051
[10:04:36] Unlocking done ✅👍
[09:58:51] It works, 2 Nokia C10 done network unlock
[09:57:34] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : B48988076A1FCD2D53134028C6222CAF
BROM : SecLevel : 0x00000000
BROM : SecMode
[09:50:26] Ok
[09:50:02] Already reported sir.
[09:49:11] 😍
[09:48:52] Is it possible to buy credits after activation expired?
[09:36:03] ..
[09:24:28] Tq
[08:46:10] Phone not going into recovery
[08:02:08] File available on easyfirmware , halabtech , kursidfirmware
[08:01:08] File i needed
[08:00:59] sc9863A processor
[07:49:42] admin do you have this
[07:41:58] All Members Waiting 👌👌
[07:41:31] Good job boss
[07:40:50] Sir oppo Qualcomm any updates ??
[07:03:07] i want to readfirmware to flash other phone and remove frp on another phone
[06:54:12] anybody with neon ray flah loader?
[06:43:25] Mine unlocks and takes credit but phone remains locked
[06:31:49] Or use mtk2 of cm2
[06:30:47] Use unlock tool
[06:20:54] Fake file only 6mb file
[06:08:54] https://gsmzee.blogspot.com/2021/09/itel-vision-2s-p651l-flash-file.html?m=1
[05:28:53] Need to remove lock
[05:28:46] I need itel vision 2s (p651l) flash file
[03:43:55] Please my Qualcomm mudule no day work I need the solution
[02:36:08] How many days before u can request for a new license
[02:27:26] How can I change it
[02:27:14] I typed a wrong email oooooool😭😭😭😭😭😭😭😭😭😭😭😭
[02:06:13] How to box re active

InfinityBoxTalks 2021-10-25

[23:13:57] Go infinity box go
[21:51:49] nokia g20
[21:51:27] reset
[21:50:54] full frp and factory
[21:50:41] SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_t99653aa1.bi
EMI : CNT : 0003
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 880103534C4431323855A3AB1AB048AD
EMMC: VEN : FORESEE : OEM : 3 : ID : 534C44313238
EMM
[21:50:41] PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : C9E605355D13CC6C2406FDA045D0210B
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : BB5A00CA7001DA006069D290D0539C5ADC014B13C650C3C0C31264A7CA115D2A
BROM : SLA : Local Auth
BRO
[20:23:22] We trust infinity team all there software is the best ever see the MTK module, also SPD module, SCR is also with them, there\'s no module like them we they never disappoint us, that is why we really want the Qualcomm module from the best team that never disappoint us before, give us the update on Qualcomm like that don\'t wait till perfect time please, update will be released latter to perfect it, we love you, I passionately love you, You\'re the best team ever.
LOVE YOU INFINITY ♾️ TEAM.
[20:09:16] Team alrdy working day and night to get unique solutions so own r&d need time, like mtk localssla our infinity team who first give solution then others copy and paste so wait for some blast updates
[20:06:30] Bro I am agree but we need update for Qualcomm and we are request some time but no any good news
[20:06:11] Hello,dear sir infinity team developed software team don\'t copy paste from others, so tested solutions need time wait and watch
[20:04:37] Sir u know infinity team,team give tested solution,, infinity team delevoped software own,, not like others who simply copy paste frm other boxes
[20:03:01] Dear sir this is infinity grp other off topic will be delected u can be banned also
[20:02:02] Please team now you give updates for Qualcomm?
[19:59:07] Hydra Qualcomm v1.0.3.2 [25.10.2021] - Update OPPO / Realme UFS

OPPO Reno 4 (CPH2113)
OPPO Reno 5 (CPH2159)
OPPO Reno 6 (CPH2235)
OPPO Realme 6 Pro (RMX2061)
OPPO Realme 7 Pro (RMX2170)
OPPO Realme 8 Pro (RMX3081)

P.S: Many Hot Updates and Hydra Digital Version are on the way, Just Stay tuned.

Gsmservice
[19:57:33] 🤨
[19:56:52] imie partition md1img
[19:55:00] Help I want to decode or fix a serial number uonlok and fix imei please team members
[19:52:50] Load IDBase v98353 Ok!

Update configuration ...
Update Ok!
Load IDBase v98353 Ok!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM40)
MODE : BOOTROM
PORT : 40
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE
[18:41:22] Thanks
[16:30:21] My infinity box I mistakenly delete my license when I format my lop top any help
[16:00:58] Yes
[15:59:01] Can it be done now?
[15:27:54] OK.tanks
[15:26:14] virus use original Windows, don\'t use cracked one or renew windows
[15:19:39] no any usb sharing sotfare instaled
[15:18:45] Hello, CM2SP2 Auto-close . help to fix
[15:10:06] how to fix === DongleManager [Infinity] v1.81 [10/25/2021 18:02:52] ===
Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Card-Reader: Generic EMV Smartcard Reader 0
HWID: 0000529A7DCB4082
=== Process started: 10/25/2021 18:02:52 ===
Connecting to server
Server connection successfully established
Checking DongleManager version...
Your DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication succes
[15:08:50] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB VCOM (Android) (COM55)
MODE : MTK USB PORT
PORT : 55

META : Failed to open META channel!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Operation : SP Unlock [ v2.28 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable
[15:08:50] 2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM52)
MODE : BOOTROM
PORT : 52
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 7BB351957B3F07BFC3CE70E9050CBE16
BROM : SecLevel : 0x000000E3
BROM : SecMode : SBC+SLA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : AB5E43D1E30C4ACCF8E231322806
[15:01:53] yes
[15:00:54] Big update for oppo Qualcomm cpu now go oppo go
[14:58:50] Card found : DFCD1A5B , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : SP Unlock [ v2.28 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM52)
MODE : BOOTROM
PORT : 52
Waiting BOOT ack ...
BR
[14:56:30] ok
[14:40:12] Just unlocked nokia c10 successfully 😎. Thanks team😊
[14:39:37] NokiA?
[14:39:16] try with test point!
[14:38:39] \"Card found : E6FA2D2E , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201
[14:38:15] content://media/external_primary/downloads/68655
[14:37:50] Card found : E6FA2D2E , v0150 Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14 Load IDBase v8331 Ok! Operation : SP Unlock [ v2.14 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.230
[14:25:15] HELP Y5P NETWORK UNLOCK NOT DONE Card found : DFCD1A5B , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : SP Unlock [ v2.28 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM52)
MODE : BOOT
[13:50:42] Any help on that
[13:50:33] How can I rewrite tecno note 7 imei
[13:49:13] but is diferent
[13:46:17] yes i have
[12:36:27] Thanks
[12:34:40] 1-8
[12:34:16] Someone help me with cm2mt2 password
[12:05:53] Link
[11:59:46] Please try and teach me the exact operation so that I won\'t damage the device
[11:57:54] Expect 😉
[11:57:12] Open partitions manager, and wipe the partitions that respond on the flyme, cant remeber now which is it
[11:50:17] Smart reset extra operation don\'t flyme account still on
[11:48:20] Then can it support nokia ta-1322?
[11:46:19] How to activate cm2QLM drivers
[11:41:27] Restore OEM security!
[11:39:13] Damaged security
[11:34:02] Flyme account please help
[11:32:50] Hello i need to cm2 Qualcomm driver
[11:31:50] ????
[11:07:48] inbox
[11:07:27] Try in flash mide
[11:06:56] LOcked Permantely
[11:06:46] Nokia C10
[11:06:08] Card found : 2CEB147A , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Manti
[11:04:39] model
[10:59:22] Nokia simlock permanetly
Show Sim Not Locked process not done
[09:53:55] Umt.
[09:53:30] Isp pinout.
[07:27:20] Cm2 2.28
[00:19:39] Is oppo Qualcomm supported
[00:18:49] Is oppo Reno 4,5,6 format and frp already supported

InfinityBoxTalks 2021-10-24

[18:20:38] How to sime unlock this phon
[18:16:59] Install in c/program 32 with new folder
[16:30:46] Please firmware of Tecno wx3p
[16:12:23] How to sime unlock this phon
[16:10:09] Yes it is mtk phon
[16:09:20] It\'s a mtk based phone .
Use mtk v1.58 and identify
[15:19:58] Thank done
[14:29:34] It\'s a mtk based phone .
Use mtk v1.58 and identify
[14:15:33] How to sime unlock this phon
[13:36:59] How to sime unlock this phon
[13:35:01] How to sime unlock this phon
[13:28:05] Ho to active Nokia best in my cm2?
[12:24:49] flash firwmare
[12:24:44] nokia 225 rm 1011
[12:24:37] help me
[12:14:28] nokia best
[12:13:32] plz
[12:13:30] nokia 225 rm 1011 flash olz
[12:13:19] hello
[12:03:08] Hi any idea to reset password without losing data mtk
[10:41:01] Ok Thanks
[08:31:11] 🤩thanks.
[06:53:28] Uninstall full folder cm2 infinitely restart laptop installed again will be work
[06:40:42] Malware, Re install it..
[06:30:10] Time wasters
[06:27:19] Very funny
[05:46:55] There are people who even believe this is a method to remove MDM and the phone works??? Funny
[02:48:37] Connect internet and re-open it.
[00:18:37] no problem enjoy your dongl

InfinityBoxTalks 2021-10-23

[22:37:34] A503DL The dongle fails, or even writing the serial number. Sometimes it says it succeeded, but the serial number is not changed. The information about the serial number is reserved in the md1 sector. Is there a solution, please help
[21:59:26] Good evening
[21:59:11] Hii
[18:37:01] 😄
[18:36:44] easy
[18:36:22] hag on logo.
[18:26:01] phone killer
[18:03:48] Can cm2 unlock bootloader on Samsung a10s u7?
[17:59:42] Client took it without success
[17:58:12] Finally
[17:58:03] So how did you fix it
[17:41:51] Mine did the same after wipe 4 files using memory tool, a013g on status it showed kg locked.
[16:41:08] Please help
[16:06:48] Please help me with NOKIA C1 ( TA-1165), ta-1165.fg
[15:33:23] Hi not working closed automatic box
[15:28:40] Hi all infinity mtk and spd automatic closed
[15:07:19] 😍😍😍
[15:00:36] @Donnytutoriais1 ❤️❤️❤️❤️
[14:47:56] MT6762
[14:47:35] Mtk
[14:47:31] Nokia G10
[14:46:25] Come best price
[14:46:15] U nee HMD Service ?
[14:46:14] Unlock
[14:45:41] Donny.
[14:45:28] Try.
[14:41:31] Only flash can remove kg locked
[14:40:35] MDM REMOVED SUCESSFUL
[14:39:56] BY GSM TONNY GOOGLE
[14:39:50] DOWNLOAD FIRMWARE AND FLASH
[14:38:33] Use this method.
[14:38:25] Yes brother.
[14:38:15] mdm removed?
[14:37:45] Yes bro.
[14:36:41] Done?
[14:35:56] 👍
[14:35:08] Memory tool☺️.
[14:34:52] Test point.
[14:34:48] MDM for a31.
[14:34:40] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : MEID : F383D38215433EB1007159B587597B39
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : B
[14:34:06] Ok
[14:33:57] I sent you a msg in your dm
[14:33:43] Please be careful
[14:33:22] how bro
[14:33:01] Yes bro, just one click.
[14:32:32] memory tool
[14:32:15] A10s chipset mtk.
[14:32:10] Mtk
[14:31:56] 😔 or test point.
[14:31:43] 🧐
[14:31:43] Identity phone.
[14:31:24] Brom mode, smart reset.
[14:31:07] Which cpu
[14:30:49] I have a10s mdm help me how to do it with cm2
[14:30:49] 😁Place don\'t copy our chat and poste on none Cm2 groups
[14:30:18] 😁done.
[14:30:00] Na weni congodje
[14:29:47] Hello.
[14:29:44] Ncongodji.
[14:29:36] Anisio
[14:28:45] how did you do it
i mean remove dmd lock
[14:28:13] Many countries even 000000000000000 imei works
[14:27:51] What\'s about mdm
[14:27:26] your country any imei working aven invalid imei
[14:25:38] Lol last day I went something wrong.
A02 had mdm Lock , I repaired imei with cm2+smart reset
Results: imei gone, baseband unknown.
But the phone removed mdm Lock, I fixed network with octoplus.

The phones doesn\'t have imei till now.
But the customer is using his phone with network normally.
Can you please explain me what really happened? @InfinityBoxBot
[14:22:34] thanks to infinity team
[14:22:34] thanks to infinity team
[14:21:30] worked thanks alot
[14:20:56] Me full credits but no customers 😂😂😂😂
[14:20:04] Unlock services slap infinity talks on the face!!
😒😒😒
[14:16:55] ok
[14:14:38] try smart reset extra
[14:13:07] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM22)
MODE : PRELOADER PORT
PORT : 22
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
[14:09:48] send software log
[14:08:59] Cm2mt2 said frp remove ok but still there
[14:08:36] Sm-a037f frp remove plss?
[13:32:13] Aquos sharp shv41 comment reset
[13:29:07] ta 1188 frp unlock
[12:49:06] Plz help me 😭
[12:29:01] Plz help me
[12:28:34] Thanks
[12:28:33] 100%protected
[12:28:30] Will try
[12:27:56] No
[12:27:49] No password?
[12:27:20] free
[12:27:00] Free or sold?
[12:25:24] no
[12:25:12] not sure
[12:24:52] 🤔 file locked, why post it here?
[12:22:40] What do you mean by hardware pls
[12:07:28] you can\'t update dead phone repair it by hardware
[11:55:39] i\'m trying to wipe itel a16plus but it\'s giving me the above error report, i even downloaded the new rom cause the phone has refused to turn on, but yet the rom seem not to go through, any help please
[11:53:47] Card found : 0A173377 , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel A16S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port spee
[11:43:16] help need boot KG6 tecno spark 8 boot file da
[11:42:03] RKT
[11:40:40] I don\'t see drivers for allwinner chip
[11:40:17] Sir
[11:35:29] https://dl1.infinity-box.com/00/pub.php?dir=/software/drivers
[11:34:53] but is password protected
[11:34:09] Leave it for some time. It will boot.
[11:26:40] 😍😍😍😍
[11:26:36] free for all infinity talks
[11:21:37] bro you are selling firmwares here? go and wait to your shop
[11:18:02] https://www.software-injinia.com/2021/10/samsung-a11-sm-a115f-m-kopa-remove-file.html?m=1
[11:15:10] Hello I\'m not received my bb5 license I went solution
[11:08:04] Any link
[11:08:01] Allwinner drivers
[10:28:30] Please help me fix this
[10:27:13] Infinix smart
[10:20:04] How to remove passcode Meizu m3x
[10:12:56] Ok sir
[10:03:01] Nokia C10 unlocked by cm2 power 💪
[10:00:02] Thanks unlock done😊
[09:55:49] Done✅
[09:48:30] Thank you so much sir I get help from you......🔥
[09:37:07] I need help
[09:36:41] I need to register or not because i want to download files
[09:32:56] Please check the order number 979076/1268191
[09:31:46] I try it many times it’s showing check after 15 minutes
[09:05:27] 😊
[09:03:55] 33days?😭
[09:00:27] Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : AC23F33C08C3EE24CB5E5076F05B0787
BROM : SecLevel : 0x000000E3
BROM : SecMode : SB
[08:56:06] On software it said 15mins which is already lapsed.
[08:55:23] How long will i wait , i fear client will take the phone before process completed and i loose credit.
[08:54:19] Am trying to unlock nokia c10 on server it says queued
[08:52:46] Help me with frp
[08:49:26] I need help How to download file I have cm2 and it\'s activated
[08:24:17] Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : AC23F33C08C3EE24CB5E5076F05B0787
BROM : SecLevel : 0x000000E3
BROM : SecMode : SB
[07:03:04] Any solution nokia TA 1322 password?
[05:35:09] Ok thanks
[05:33:18] sorry go to other site infinity not support jtag
[05:30:37] Directins boss
[05:30:18] Do u have any diagram of pin out goes
[05:28:59] only isp pin out
[05:24:57] Any picture for its test point?????
[05:24:31] Anyone with solution for Qua phone kyv42 hardreset password (Qualcomm)
[02:14:09] Yes

InfinityBoxTalks 2021-10-22

[21:32:07] Thanks
[21:09:24] hello team, will nokia best get update in future for latest model? i want buy best tool
[20:58:32] https://mega.nz/file/85hlhIiI#_RuuFBFOT3rXx4b8y5yUT7GNmS7UxstBzFNTrlaaENw

Firmware tested
[20:56:01] Flash
[20:49:08] you reseted by miracle
[20:47:41] Inbox
[19:19:03] Now to work the kg locked
[19:18:46] And power on perfect
[19:18:38] Flash
[19:18:35] Yes
[19:18:09] after smart reset just hard reset
[19:16:18] I am here for you to contribute, do not criticize
[18:56:29] Hello help me for this firmware
[18:56:04] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Cont
[18:15:42] Yes you are free to use any other box.
[17:34:28] I\'ll send here
[17:21:35] Tecno: bc2c-op
[17:20:57] Okay
[17:20:53] Boitcselect
[17:20:41] Frp techno bd2p spd
[17:07:47] Dont use Smart reset by Infinity, dmage the cell is Samsung a22
[16:50:52] Ok
[16:36:49] https://support.halabtech.com/index.php?a=downloads&b=file&id=524594
Help me with Tecno bd1 file
[16:30:00] Have
[16:29:57] No
[16:24:03] Use memory tool
[16:20:44] Need this option for more support
[16:20:31] Erase rpmb
[16:20:21] Add option of erase nvram
[16:20:08] Add for module cmt2
[15:58:10] Tecno bd1
[15:57:40] T65

Boot Done!

SOC GEN: UniSoc (E-family and Modern) BuildInfo: BD1-SP575AB-RGo-OP-210721V4 MemoryInfo: EMMC: 16 GB; DRAM: 1 GB

Platform Version: MOCORTM_17C_W21.07.2_Debug Project Version: pike2_pub

BASE Version: FM_BASE_17C_W21.07.2

HW Version: sC7731e_modem CMP_Time: 02-09-2021 04:49:59

MODEM TAG: MOCORTM_17C_W21.07.2_Debug_FM BASE_17C_W21.07.2_sc7731

PSN1:070371518C010042

Done!
[15:33:20] Only if you want me post info at diag mode
[15:32:32] No log it stop at fdl error
[15:28:54] Always post logs
[15:25:02] Itel bd1 spd sc7731e not supported
[15:15:40] needed plz
[15:15:06] https://easy-firmware.com/index.php?a=downloads&b=file&id=158922
[15:13:45] Only loads in the original version of Windows؟
[15:09:30] yes
[15:09:11] cracked windows
[15:07:01] CM2MT2_v2.28 not open plz help
[14:16:38] Thank you
[14:11:18] redmi poco x3 mi account remove
[13:55:19] Itel A571W frp solution
[13:14:29] Who can help
[13:01:41] https://forum.gsmhosting.com/vbb/14468974-post1.html
[12:49:14] Redmi 9 unlock bootloader is that possy with cm2mt2
[12:34:02] Credits
[12:33:53] Thanks alot
[12:33:36] free or credits
[12:28:05] Thank you
[12:27:01] C20 is supported for unlock with SPD2 v 2.14.
Algo is updated and you can now unlock the phone.
Remember only non cloned phones are supported. Phone with damaged security (clone) and nv are not supported.
[12:22:49] Post logs
[12:22:25] Use correct iOS I\'d and password
[11:36:08] Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Box/Dongle misconfiguration
Diagnostic code: 66
Username: 004256284E
==> Scan C:\\Users\\WeHere Creations\\Desktop\\DongleManager (2) for report.log
==> Scan c:\\InfinityBox for report.log
==> Scan c:\\Program Files for report.log
==> Scan c:\\Program Files (x86) for report.log
Found files: 0
==> Scan C:\\Users\\WeHere Creations\\Desktop\\DongleManager (2) for *.ibin.log
==> Scan c:\\InfinityBox for *.ibin.log
==> Scan c:\\Program Files for *.ibin.log
==> Scan c:\\Progr
[11:28:29] helllllp!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[11:22:54] please help smart-card misconfiguration error and when i want to log in my account token tool always brings 0
[10:33:54] 🙋‍♂️
[10:33:47] Hello
[10:17:56] I don’t know what could be the problem
[10:17:34] I bought infinity server credit 10 minutes ago
[10:12:34] For mtk t402 no work
[10:09:09] How to unlock tecno t402?
[09:44:20] Help me fix cm2 sp2 not working when identifying just close auto
[09:43:56] Comnt débloquer tecno t402 ?
[09:28:59] Sir any feedback for unlock Spark 5 air network?
[08:45:04] Hello sir please send the solution of Nokia c20
[08:16:28] 🙏
[08:14:57] Cm2 spd auto disappear after open
[07:37:41] Please help I forget my username and password for cm2 dongle if put the default username and password is not working what should I do
[07:16:59] Please team any one with nvram and nvdata backup of oppo ch1938? Am have imei 00
Thanks
[04:09:28] Research this takes time ! But feel free to Try! Any issue post logs here thanks!
[04:05:57] What do you need to activate Diag for?
[04:05:32] Others UNISOC Models have Diag disabled C30+ too if i\'m not wrong
[04:04:32] U must wait for Next update Nokia uses own security layout
[04:04:13] ?
[04:04:05] SE - Second Edition
[04:03:39] How problem
[04:03:28] Yes
[04:03:13] Edition 2?
[04:01:46] Nokia C1 SE diag is disabled

InfinityBoxTalks 2021-10-21

[17:57:53] HELP
[17:57:47] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...

>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1.
[17:54:08] yes.
[17:22:55] Hi i want to reset my Nokia g20 process
[15:58:43] ?
[15:58:41] it is possible to unlock Nokia C1 2nd Edition
[15:21:59] any help please?
[15:17:54] 👍
[15:15:14] Hello sir, i did activation last 3 months but my client didnt pay me up to now, he always give me excuse, can you please block it temporaly until he pay me back then i will let you realese after payment done
[15:10:44] i cannot log in website
[15:09:58] i am using corrct log in information
[15:09:42] i cannot log in
[15:09:36] Wrong username or password
[14:57:44] i took it from dongle manager
[14:18:43] Ta1380 network unlock possible?
[14:07:54] Card found : F2BA70E3 , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset Settings [ Format FS ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : PR651H
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum
[11:25:23] itel W6503 boot file
need to remove frp
[11:11:55] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 0D757EBBF3039D40112DA44388A91CB9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM :
[11:03:30] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 0D757EBBF3039D40112DA44388A91CB9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM :
[10:41:32] Dm
[10:23:32] I ask for help creating a Yahoo Japan account, I can pay.
[09:33:16] 👍
[09:33:04] ok thanks
[07:54:21] PTFN : MediaTek USB Port (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2C9DC6390B6204EA01DCA353426A89C2
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : A227EC6C83128D802F429DB5145E1842E432C9DE9896BDEC9B5D1238F5A873A5
BROM : SLA : Local Auth
BROM :
[07:52:58] text logo
[07:51:16] Da file link
[07:51:12] Help
[07:51:10] Infinix x626 not boot in cm2
[07:00:50] Emc issue
[06:54:00] ?
[05:52:55] itel a23pro frp bypass sir please?@infinity tool
[04:56:19] i thot im the only one facing the challage to these devices from South Africa

InfinityBoxTalks 2021-10-20

[20:13:49] Hope you get solution soon
[19:47:50] No, that phone is came from South Africa with that error
[19:46:32] If restore NVRAM from other Nokia?
[19:40:30] Imei1:357735911613362
IMEI2:357735911613370
[19:28:10] Please
[19:28:06] Wait
[19:24:37] 353659117298949
[19:23:03] 353659116798949
[19:21:50] Locked permanently
[19:19:05] remove put other Sim card
[19:13:12] But is locked.
But I facing not locked issue from dongle
[19:09:11] No text bro
[18:37:02] ok.
[18:34:16] Will give feedback tomorrow when at job
[18:33:52] Sorry spd
[18:33:29] Is soda a tool?
[18:32:41] Use soda ver2.14 select Itel model l5006s and forced format to frp and game over,thank me later.
[18:32:08] Frp
[18:23:47] Ok. I will do like that
[18:21:40] What is the problem?
[18:12:46] nokia c1 second generation model 1380 network unlock, cm2 support?
[18:00:29] Try to flash only preloader first and check if it make other port.
If not then untick HW compatibility and tick flash format and then flash.
[17:54:29] It is dead. Only shows MTK when connected to pc.
No didn\'t check
[17:44:25] Card found : 0527543B , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.2010
[17:44:11] 201005.001
[17:33:32] What is the initial condition of the phone?
Dead or bootloop?
Did you do identify initial. To check firmware version in phone?
[17:17:14] A315F flashing is giving this error. The phone doesn\'t turn on. Only shows MTK mode when connected to pc. Please help
[17:01:07] Hi all
Itel L5006s frp bypass supported by cm2?
[16:44:16] Read firmware. Then flash it again but tick full format
[16:34:07] X
[16:17:12] 🙏🙏🙏
[16:13:52] remove USB director
[15:25:40] Bd3 da file please
[15:17:31] Android 11
[15:17:24] please tecno pop5 BD3 SPD frp solution
[15:16:33] Hello
[13:21:37] Who can flash x657 easybuy for me
[13:21:00] Hello
[11:24:56] Thanks
[10:57:51] help meeeee
[10:52:43] not rec any email
[10:52:33] cheak email
[10:52:23] Azizahmad1881@gmail.com
[10:52:20] my b55 email not rec from days
[10:52:02] me
[10:52:01] help
[10:51:55] ‌‏ اَلسَّلَامُ عَلَيْكُم وَرَحْمَةُ اَللهِ وَبَرَكاتُهُ‎ bosss need helpلسَّلَامُ عَلَيْكُم وَرَحْمَةُ اَللهِ وَبَرَكاتُهُ‎
[10:46:12] uninstalled even anydesk and teamviewer but still not opening
[10:41:22] Which one bro
[10:25:47] Hello can someone help this smartcard driver
[10:24:55] This error yesterday
[10:20:11] Service card error
[10:18:40] Admin plz check this Serial number . 079F5657
[10:16:32] Hi
[09:51:40] Help
[09:51:33] Pls help me I flash itel p37 after flash not services
[08:26:33] EMMC

InfinityBoxTalks 2021-10-19

[18:50:52] Sir not working
[18:19:49] Install drive token.
[18:16:08] Not working...
[18:13:57] Fast way for the future https://infinity-box.com/support/?r=100155
[18:13:51] Hello,

1. Read this https://infinity-box.com/legal/eula/
2. Uninstall/disable Eltima/Flexihub and other usb sharing tools and do not use it at the same time with Infinity software
3. Reboot PC

Make the next steps ONLY after uninstall usb sharing tool otherwise YOU MAY DAMAGE your dongle!

4. Update dongle firmware with Infinity DongleManager
[16:18:54] Use Dongle manager and do uk off.
Re-start exe.
[16:13:38] Thaaanks at last i got a file for free
[16:05:48] Tried but no luck
[15:59:48] Thansk
[15:58:08] Card found : 37BD2301 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT :
[15:58:02] Samsung sm-a125f frp

3pc with Windows 7 failed but Windows 10 done one crick
[15:55:51] support errea bro
[15:55:14] Give link boot file spd
[15:54:13] download boot file from support and go to service then remove frp. don\'t flash
[15:51:52] How to remove frp infinix hot 10i chipset spd
[15:48:34] iTel firmware ready for download from Infinity support: W5006X, W5008, W5503, W5504, W5505, W6001, W6002, W6002E
https://infinity-box.com/news/?r=4192
[15:35:10] How to turn on imei repair on cm2sp2
[15:07:34] 3 pc same error
[15:05:47] sm-a125f frp error
[15:04:54] Card found : 37BD2301 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM10)
MODE : BOOTROM
PORT : 10
Waitin
[15:03:23] 🥳
[15:02:17] Nice
[14:55:22] 👍
[14:46:18] okae lemme try
[13:13:29] King! 🙏
[12:50:08] Sorry in CM2SP2 not MT2
[12:13:14] .
[12:10:49] When I can find Nokia old firmware I need flash file for rm-839 with Hebrew language. i can’t find it anywhere. Somebody can help me?
[12:04:54] Fg file of 652b
[11:56:55] 👍
[11:55:54] Done
[11:55:00] hello everyone im looking for this file huawei p40 lite clone
[11:54:21] Wait for phone...
Phone found! [ 22 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash
[11:47:06] BG2-U01C170B187CUSTC170D001_Firmware_7.0.0_r1_EMUI5.1_05014RXA File By (Support.HalabTech.Com) https://drive.google.com/file/d/1fZJR_LJYxRZ2C5DvyWX7QSBuCEHbjofL/view
[11:38:39] le suivant : 827074136168975.
[11:16:07] Infinix PRH652B frp reset solution please.
[11:12:17] HAMMMMMM OK.
[11:04:45] Hi
[10:57:32] Bro do read info and check
[10:03:58] ???
[09:59:55] Phone very marque
[09:58:01] Enlève l\'étiquette sur lequel il ont écrit tecno
[09:57:34] Ok
[09:56:43] C\'est sans batterie
[09:56:33] Ok
[09:56:20] English please
[09:55:56] Enlève la batterie batterie et envoie la photo
[09:54:56] Et non batterie
[09:54:50] La photo du téléphone
[09:53:20] Rien sur la batterie
[09:51:54] Il faut enlever la batterie et voir s\'il n\'y par hasard un autre modèle dernière
[09:50:22] C\'est quelle marque ce téléphone la s\'il vous plait
[09:21:42] ???
[09:11:14] Nokia TA-1270 TEST POINTS????
[07:30:55] I send you pac file it\'s for SPD how you used it in mtk?
[07:30:12] Use Dongle manager and do report and fix.
[06:49:33] Nokia G20 firmware please?
[06:00:20] My dongle is show .. dongle misconfigure is there away I can fix it .. I just renew it for two years.. please help
[05:57:45] mtk 1,58 uk off file please
[05:24:16] yah hope so in future updates
[04:46:44] Thanx... But i used another trick in CM2MT2 latest exe and worked like a charm
[04:44:21] Was trying to remove kg on A013g samsung. Is there anyway for these type of phones. It will be great if infinity support these mtk samsung phones, its now a great challenge on the market( mdm, knox guard, etc)
[04:39:49] I did what you told me , after that it goes to download mode and on status says kg locked and cannot be flashed😢
[04:34:21] OK, let me look for it
[04:19:22] Look for efs and vbmeta
[01:58:23] Yes we all know that.
Would you be kind enough to share model name/phone model?

InfinityBoxTalks 2021-10-18

[18:32:50] Yup
[18:32:44] Orange fr ??
[18:32:23] Win 10 pro 64bit
Last update
[18:32:19] 👍 I will give you a code after 1h
[18:31:17] Atf best
[18:28:59] Have you got any box for Nokia??
[17:43:03] Can someone help me the NVRAM file for Samsung A10s (Samsung A107f)
[17:25:42] I\'m not novice
[17:24:10] And what you trying to achieve?
Use correct setting.
Tick local sla and connect phone in Brom mode both volume keys pressed.
[16:58:25] Japanese friend is here
[16:55:44] gud day how is everyone doing
[16:49:29] Im looking for Japanese friends any one here
[16:36:10] or suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!

DA : SETUP HW PARAMS FAILED! PROTO_VER is OLD?

Error : Fail to init protocol!
>>> Check and select CORRECT SETTINGS for your device!

Reconnect Power/Cable!
[16:36:10] : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port_V1633 (COM18)
MODE : BOOTROM
PORT : 18
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
CODE : Bianco
TYPE : MODERN [RAPHAEL]
BROM : MEID : E59D6A1341C9AA14F49EAEBA0069B395
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM :
[16:36:09] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM33)
MODE : PRELOADER PORT
PORT : 33
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
CODE : Bianco
TYPE : MODERN [RAPHAEL]
BROM : SecLevel :
[16:23:07] Already started downloading that....thanks
[16:22:16] Will be supported in future updates. Meanwhile you can use stock firmware available on support site.
[16:10:08] Operation : Read Firmware [ v2.28 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM37)
MODE : BOOTROM
PORT : 37
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : MEID : A2A4018D34D4DE9
[16:09:00] Just leave it alone, after some time it will on normally
[15:59:28] It will work
[15:59:09] Format that system and reinstall the cm2 setup
[15:55:39] Help
[15:55:20] Plc brothers i need the solutions to this problem
[15:53:18] Anyone who can help with a link or knows how to well setup and use easy jtag plus plz?
[15:51:01] good evening everyone I hope you are well. just ask what can cause the CM2 to fail to open after just one use.
[15:47:48] Tick local sla and connect phone with both volume keys pressed.
[15:47:20] Post logs
[15:37:57] ?
[15:37:53] Anyone with preloader
[15:37:42] Gionee M11 not connect in bootrom mode
[15:18:22] Thanks for help❤️❤️
[15:11:13] Ok thanks
[14:22:59] Is HUAWEI NOVA 3 SUPPORTED
[14:15:41] Infinix x689c firmware read fail cm2mt2 v2.28, I need help
[13:48:46] Samsung A02 Mkopa unlock
[13:40:47] P
[13:40:41] Hi i forget username and password for my dongle
Iam trying by dongle manger and get it but not sing in .. wrong username or bassword
[13:38:20] nokia ta1352
[13:37:11] SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 0, price:5
Process...
Process failed : Wrong SS - device security damaged

Reconnect Power/Cable!

help any solution
[13:37:11] Card found : 16956A1B , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.13 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : S
[13:20:00] After download is complete, Enter ypur IOS USERNAME & PASSWORD to service the phone
[13:18:12] Ok thanks
[13:17:23] Check support area its available
[13:17:16] Or which base will work in cm2mt2?
[13:16:54] PR652B FDL not started, need loader plz
[13:12:36] Ok
[13:12:00] Thanx brother
[13:03:08] Yes same Imei both back side and inside phone
[12:59:31] Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Platform Version: MOCOR_20A_MP_W20.36.5_Release
Software Version: 10.00.17.02
BASE Version: FM_BASE_20A_THIN_MODEM_W20.36.5
HW Version:
[12:59:13] I did nothing it come for unlock
[12:50:19] Wrong input data
[12:50:10] Hello I ask Nokia 215 give unlock error
[12:48:36] Sorry infinix hot 10i chipset spd
[12:35:11] Tecno hot 10i spd not supported
[12:32:36] https://forum.gsmhosting.com/vbb/f296/looking-unsupported-hisense-spd-model-list-2991331/
[12:00:34] Any solution?
[12:00:33] Done
[11:26:13] Hello tecno ke5 basband solution please
[11:18:18] x650 fix baseband file anyone please?
[11:05:16] As used toilet paper))
[10:47:52] yes
[10:42:17] There isn\'t any smartcard in the slot. Damn. So its as useless as a toilet paper?
[10:29:54] Worked?
[10:26:43] Nokia c10 network unlock done
[10:08:32] Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.230_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P3_Debug
Project Version: pike2_pub
BASE Ve
[09:27:21] It\'s just pinfinder. It was released in 2008 for low range Chinese phones to find their pinouts. It\'s linked with infinity main box and need activation. Seems you only have the pinfinder so it\'s of no use. It\'s an antique and a must have in collection product.
[09:21:05] https://drive.google.com/u/0/uc?id=16cl062M-zb0o7Zl42IRhP5UoxMopvpQA&export=download not tested personally
[09:12:00] Fastboot
[09:11:42] Fastbook
[09:07:33] any other option to remove frp oppo F9 without TP mode please tell me.
[08:54:18] Thanks for your response. So how do I set it up and what\'s its use? Its my first time seeing it cause I\'m used to using Chimera Tool.
[08:53:03] It\'s not infinity box. It\'s pinfinder - additional hardware for infinity box. Not actual now.
[08:25:01] I downloaded the firmware but when I open it says no smartcard found.
[08:24:35] Hello everyone, I need help with this flash box.
[07:08:55] Utilizer l anglais Mon ami
[06:23:58] Bonjour a tous. Je voudrais craquer mon modem Vodafone. comment m\'y prendre svp 🙏
[06:01:24] I already tried, don\'t accept
[05:58:48] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Repair Security [ v2.28 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOAD
[05:47:17] Download UK off file, then open app file location in c drive copy paste that file uk off
[05:04:25] NOKIA 1.4 Password forgotten... Any solution?
[04:53:18] Hellow this house... Please help me to get this firmware for NOKIA 2_TA-1029

00WW_0_68R, 00WW_0_68R [Wed Oct 30 22:53:36 CST 2019]
[04:48:14] TA-1029
[02:24:03] thank you friend.
[01:09:38] Ta version

InfinityBoxTalks 2021-10-17

[21:50:02] Hellow this house... Please help me to get this firmware for NOKIA 2

00WW_0_68R, 00WW_0_68R [Wed Oct 30 22:53:36 CST 2019]
[21:29:22] X firefly tick
Brom mode
Ssla local tick
Hold both button
[21:22:11] thanks.
[21:22:02] ok i will try
[21:21:26] And meta
[21:21:21] U tick ssla
[21:09:49] people help DA file of mobicel R8, I want to repair imei with my cm2 but it\'s asking for DA file
[19:47:20] Password
[19:29:35] meizi mx6
[19:29:18] [FL] : Total size : 0x7441D448 [ 1,82 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM43)
MODE : BOOTROM
PORT : 43
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : MODERN [RAPHAEL]
BROM : MEID : F09F4791FB5D4BD514C467E1607DBCC2
BROM : SecLevel : 0x00000007
BROM : SecM
[19:29:08] Issue??
[18:40:00] https://drive.google.com/u/0/uc?export=download&confirm=57dh&id=1Hs3OUQTrpSS86JazCMq78mJzIH44NU5P
[18:35:56] your help
[18:35:45] ineed this file plz
[18:35:34] https://support.halabtech.com/index.php?a=downloads&b=file&id=115187
[18:10:00] Ihave received anew password let me try iwll come back to you
[17:59:06] Yes sorry for late replying
[17:04:59] Hi
[16:34:27] Cm2 needs to update their works on the SPD 9863 more
More updates
[16:25:24] Repair with cm2
[16:25:09] How can I remove frp on itel S16
[16:15:04] Please
[16:15:00] Tecno ke5 basband unknown Help me
[15:00:51] I got only cm2
[14:56:30] I could have given you a chimera backup with all the security files but you have no tool
[14:55:55] You need chimera if the baseband is there
[14:38:51] Ok plz I have just seen it now but thank u
[14:37:41] Got thanks boss
[14:29:49] Neon ray pro
[14:29:31] Unlocked one phone but credits taken twice
[13:30:54] ufi dongle mmc isp pinout.
[13:30:27] Kyocera kyv43 please how to reset phone
[13:15:33] helps to create an account I can\'t
[13:14:35] https://forum.gsmhosting.com/vbb/index.php
[13:01:32] Pls
[13:01:26] Do u av backup
[13:01:20] Do av boss
[12:57:54] I only av scatter file i download
[12:57:31] I dnt av dat
[12:55:42] Write backup
[12:46:42] 🙄🙄🙄
[12:46:34] Remain imei
[12:46:25] Done boss
[12:35:54] The file I have is paid
[12:32:25] Yes
[12:01:59] Spd?
[11:58:08] Hello i need to infinix 682 copy firmware
[11:28:09] Ok tomorrow i will send
[11:28:05] readed working file
[11:27:57] yes
[11:27:52] U need readed file
[11:27:29] for repair download error
[11:27:17] oppo_custom file
[11:27:01] What backup
[11:13:03] need oppo reno 2z backup
[09:00:05] you flashed wrong file
[08:40:01] MTK
[08:39:13] This phone MTK cpu?... I think is Exynos
[08:19:26] Good day team pls I\'m having problem with my ios password, I try to reset it still replying wrong password. Help pls
[08:13:12] This is Infinity-box Channel
[08:02:41] Pls is it box or server service chimera
[06:53:24] how ?
[06:52:32] yeah
[06:51:58] try with smar reset but demo not removed
Card found : 92570133 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Por
[06:50:42] just take it and flash with odin
[06:50:32] can i remove demo vivo x70 pro mtk cpu ?
[06:50:06] yeah
[06:49:13] Ar dis safe
[06:48:55] Ok
[06:48:26] remotely network will be solved unbrick the phone first
[06:47:36] Hope no network issues
[06:47:23] It OK to flash
[06:47:14] It saw it file on samfw
[06:46:57] yeah
[06:46:43] With Odin ryt
[06:46:30] How flash it
[06:46:25] Maybe i don\'t get it
[06:46:14] D scatter file i backup b4 using d one i download is not working for it....
[06:45:43] fullflash
[06:45:09] find scatter firmware first
[06:44:37] but for this situation you have to find scatter file for a12 flash with hydratool or unlocktool after finish you can flash 4 files your problem will be solved cause i have already faced it and i solved it
[06:42:13] fullflash with odin
[06:40:33] It only show dis
[06:40:23] Yes it break
[06:39:28] And now is software bricked
[06:39:09] 🙄
[06:39:05] Wat should i doo
[06:38:41] How ar my going fix boss
[06:38:40] And how you can unlock bootloader of a locked phone? How you will enable developer option?
[06:37:14] His phone\'s bootloader might be locked and he must unlock it to flash his files into it
[06:35:59] As for me, it isn\'t an issue since I have all the files and tools. Except for him who neither have chimera or unlock tool. That is a simple one to fix
[06:35:10] Hugs
[06:34:54] Go ahead bro let us know the results later.
[06:33:42] If one is without tools, it is trash.
[06:33:10] I advise don’t touch anything will bring you problems
[06:32:33] This phone is trash
[06:28:36] I dnt av chimera
[06:28:36] Switch off the phone, Disconnect the battery and connect it back, press both the volume keys and connect the USB. It must be showing a normal Download mode and not that one which automatically booted itself into it
[06:28:01] Pls
[06:28:01] How can fix it
[06:27:17] This shows a locked boot loader phone
[06:26:38] But if it has no imei, chimera can fix it
[06:26:21] It as imei issues b4
[06:26:15] Then get 4 files and flash
[06:26:12] No any kg
[06:26:02] It normal phone
[06:25:55] Nope
[06:24:43] Is it KG locked?
[06:24:00] It write boot and some other tins ar mismatch
[06:23:45] Show the Download mode image
[06:23:33] On download mode
[06:23:23] Let me hope you aren\'t trying to fix a KG locked phone?
[06:23:20] Yeah
[06:22:53] Does it boot into Download mode
[06:22:20] Wat about 4 file with odin
[06:10:14] Use chimera to flash that phone otherwise you will kill it
[04:59:02] Does cm2 dongle have emmc setup?
[04:20:12] Hello dear all Huawei y9s frp possible with CM2?
[04:12:18] Flash file no ope
[04:11:52] ,hwo to nokia ta 1174 infinty best flash
[04:10:10] Thnks
[03:53:34] If possible to best dongle id change into infinite box

InfinityBoxTalks 2021-10-16

[22:03:48] How to unlock network HTC A3333 Buzz with infinity?
[22:00:37] Please i need firmware for huawei DUB-AL00a 8.2.0.176(C00) this version or higher. 🙏🙏 thanks
[21:50:53] Haw can i fix dat pls
[21:50:39] I try to return d backup file i did b4 flashing it new am still getting same error
[21:49:43] On the phone mismatch error
[21:49:25] I try to download Samsung a12 on cm2 site to flash my Samsung after down am getting error
[21:48:03] Everybody
[21:47:59] Hi
[21:31:04] https://infinity-box.com/support/?r=15&a=0&fid=5995684 log in with ur cm2 account and download
[21:26:19] Please i need firmware for huawei DUB-AL00a 8.2.0.176(C00) this version or higher. 🙏🙏 thanks
[20:52:29] I need this file
[20:01:13] Which windows the best to use miracle box and infinity cm2 ♾ please 🙏
[18:58:23] Sir
plz add more SOC to FireFly Support
[17:47:31] NVMng : SecurityInfo

SEC : SLS:0, SKS:0, SKV:0

>>> ERROR : Field WFIXNV1 NOT initialized, skip it!
NVMng : SecurityInfo

SEC : SLS:0, SKS:0, SKV:0

>>> ERROR : Field WCNFIXNV1 NOT initialized, skip it!

>>> ERROR : Security data has been destroyed!
>>> INFO : Write new NV from FW or another device and repeat repair!

Done!
Elapsed: 00:00:31
[16:58:53] DONGEL PROBLEM SO PLEASE USE YOUR INFINITY SIM IN ANOTHER DONGEL
[16:56:06] guide me how to frp NUU N5001L MOBILE
[16:28:00] Admin please help sn 0044B4769E ibought credit 17 credit icant login to check My balance what\'s wrong ican if itry to sign it\'s always show wrong username and password
[15:51:07] Suport more phone plz
[15:50:30] Need updete
[15:50:16] Cm2Qulqam nat updete long time
[15:49:48] Every good
[15:48:20] You dont good update for a long time
[15:48:14] Any thing
[15:39:01] AFTER 15 SECOND UNLOCK DONE
[15:37:56] 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.370_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P4_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P4
HW Version:
[15:37:08] Hello everyone
[15:23:13] Why infunity cm2 dont updete
[14:10:13] flashmode supported or not?
[14:09:39] Operation : Identify [ v2.13 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : P651L-F6316-11.0-OP-V023-20210720
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

Platform Version: MOCORTM_20A_W21.15.3_P5_Debug
Project Version: s
[14:08:45] NOKIA C10.
[14:08:36] C10 NETWORK UNLOCK DONE.
[14:08:01] 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.370_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P4_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P4
HW Version:
[13:01:45] Nokia 2.3 firmware
[12:23:53] https://t.me/file_gsm_grou
[11:28:29] Mi account
[11:27:55] And what problem in phone?
[11:12:26] Redmi note 5a
Model : MDG6
[11:03:35] Which model?
[11:01:06] Test point
[11:00:50] Iam tryed but not working
[10:45:27] Help
[10:44:59] Help me
[10:44:54] Infinty best 2 not open
[10:44:47] how do i select this file on cmp2spd
[10:35:46] Which file will use for itel p12
[10:31:55] ...
[10:31:55] which file?
[10:30:33] Use this file.
[10:29:36] HELP ME SIR
[10:26:27] Redmi not 5a supported qlm cm2 or not?
[10:26:03] it s ITEL P651W
[10:24:41] Operation : Format FS / Reset Settings [ v2.13 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or setting
[05:54:06] It\'s good to always backup before writing new firmware.. Moreover in situations like this writing only system.img may have solved problem than to write whole flash
[05:17:21] Am having the same problem boss, bt the website doesnt contain Kenya, i have been having problems how to activate CM2
[04:14:13] After more research done by cm2😄😄😄😄
Cm2 is powerful 👍
[03:48:49] Firmware Mobicel switch go Android 8 needed.

InfinityBoxTalks 2021-10-15

[19:10:49] Pay your EMI and unlock your device
[19:04:28] ?????
[18:11:46] OK.
[17:53:15] Good night.
[17:53:07] Team, Nokia c20 cm2 network unlock supports?
[17:44:21] How do I create an emi or preloader file for a lg k430hm
[17:44:00] Como creo un archivo emi o preloader para un lg k430hm
[16:09:18] Pls some one should help me out with this
[16:04:45] All programme no work
[16:03:13] I made sure internet connection was on
[16:01:17] It shows done but when I power on device reset protection is still active
[16:00:19] It runs completely but reset protection is still enabled
[15:59:08] Done! Thank you, have a good day
[15:49:22] Which model can work it in infinity SPD
[15:48:26] Infinix x688 frp help me please
[15:46:24] Help
[15:46:20] Frp
[15:46:05] Itel p36
[15:40:35] Post logs
[15:38:35] ???
[15:23:42] I ticked only reset protection but the reset protection is still on.
[15:22:56] I used Smart reset extra but the reset protection is still on
[15:21:55] Frp
[15:21:38] oppo Reno 5f smart reset but fro still on device
[15:20:49] Please help
[15:20:41] Good day friends
[14:53:05] Sure understood thank u so much
[14:50:36] so we need to wait until says completed then we do unlock again
[14:22:16] Oky
[14:22:11] Thanks bro workin 🙏🙏🙏🙏
[14:21:55] SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.300_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P3_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P3
HW Version: sc7731e_modem
CMP_Time : 05-25-2021 21:34:06

MODEM TAG : MOCORTM_17C_W21.11.2_P3_Debug_FM_BASE_17C_W21.11.2_P3_sc7731e_modem_pike2_pub

NVMng : SecurityInfo
IMEI[1] : 357735911504207
IMEI[2] : 357735911504215
WIFIMAC : 44917C08317E
BT_MAC : 44917C08317D
SEC
[14:21:55] Card found : FCF7A70C , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.2010
[14:21:39] SIr some problem here
[14:20:44] Sir some problem here
[14:20:40] How to activate cm2 on nokia best?
[14:20:20] Not complete. It say executive
[14:16:04] Yes
[14:13:15] Ok
[14:12:59] After 15 min job not done
[14:12:44] OKAY AND WHAT AFTER
[14:12:09] OK BRO
[14:11:22] YES I DID BUT ASK 15MIN AGAIN
[14:10:05] NO JUS NOT UNLOCKED SAYING 10 TO 15 MIN BUT SAME ISSUE AFTER 15 MIN
[14:09:08] CREDITS TAKET
[14:09:06] now I\'m checking them out and let you know
[14:08:57] NOKIA C20 NOT UNLOCKED Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.201005.001 V1.350_B01 release-keys
Platform Version: MOCORTM_20A_W21.15.3_P13_Debug
Project Versio
[14:08:23] okey bro thanks
[14:07:05] yes
[14:05:39] okey
[14:04:42] Usb over network
[14:04:32] could it be so?
[14:04:30] this Usb over Network ?
[14:03:39] this ?
[14:03:18] no flexihub bro
[14:02:43] it is in normal condition
[14:01:33] I pull the first tool to you
[14:01:31] Brother, all this is fine with me

if the tool did not work, the 1st tool, ie infinity Best, would not open
[13:57:32] I deleted and re-uploaded and then threw the license in the folder, there is the same problem
[13:57:25] So,how to use this?
[13:56:28] no open best2
[13:56:20] help me plz
[13:55:08] After 15 min i should press. Ok.??
[13:53:55] Yes
[13:53:35] I shoul wait 15 min?
[13:50:08] ok
[13:34:27] Samsung a12 vnram file....cm2 back up
[13:33:58] Pls i still nid
[13:33:51] Greeting
[13:33:47] House
[13:33:41] Ellooo
[13:32:40] When i repeat after 15 minutes. It asking 5 credit again.
[13:30:20] Backup by me 👇👇👇
Product Manfct : lenosed
Product Info : b708_tab
by the way the Firmware prudent by password : 5225356

https://usaupload.com/56aN/MT6582__lenosed__710__8.1.0__ALPS.KK1.MP1.V2.36__KOT49H__b708_tab.rar
[13:29:47] Is say repeat after 15 minutes.
[12:46:05] thanks boss let me check it
[12:29:16] paste this file C:\\InfinityBox\\CM2SP2\\Boot\\TECNO restart exe and repeat
[12:07:30] Everything does not give
[11:47:26] Come but paid
[11:38:59] this???
[11:37:08] the phone is spd
[11:37:00] any solution
[11:36:55] frp cm2spd
[11:36:20] INFINIX HOT 10i PR652B FRP RESET FILE (PAC FILE)
[11:35:10] I try ti unlock nokia c20 with cm2sp2. Is take my credit but phone still not unlock
[11:28:59] It will lock back after connect to WiFi for now I don\'t think there is any solution for that.
[09:43:13] 👍
[09:39:45] 👍
[09:35:52] We need update mtk module Redmi account with out VPN
[08:32:53] Use 64 bit
[08:32:43] Change window
[08:18:31] I have a problem with my infinity dongle, I can\'t open it
[07:24:31] With test point?
[07:23:10] Ok
[07:17:35] Can CM2 handle/remove redmi note 9 pro MI account?
[07:02:04] Thanks
Please which site can I get all this itel (fg) files
[06:59:30] Please you people should try to add all those SPD/Qualcomm phones that have version 11 operating systems so that we can be using CM2 to format /frp
[06:48:42] Please I need this p651w.fg for itel p57 (P651w)
[06:48:39] I have unlock tool for rent welcome
[06:37:15] I\'ve issue with login on Gsm-forum, I updated username and password with my email but can\'t login with new or old password.
Even username of Cm2 dongle hasn\'t changed to new username.
[06:36:28] clear knox guard with unlock tool
[04:44:39] Please can cm2 unlock oppo A3s qualcomm
[04:36:04] Thanks

InfinityBoxTalks 2021-10-14

[21:17:37] What is power flex
[21:11:42] Please, i am new to this business
[21:09:31] Check power flex
[20:39:55] Please help
[20:38:41] Lol
[20:38:14] Go to the police station and give report.
[20:03:00] https://taheem-software.blogspot.com/2021/05/dlight-solar-m100-mt6580-da-file.html?m=1
[20:00:17] Dlight m100 da file help please 🙏
[19:18:46] Device name DESKTOP-PDKFG8U
Processor Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz 2.00 GHz
Installed RAM 4.00 GB (2.44 GB usable)
Device ID 30E2D50F-8F90-4D92-B645-94D12A31386C
Product ID 00330-80000-00000-AA101
System type 32-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
[19:18:36] Edition Windows 10 Pro
Version 21H1
Installed on ‎15/‎10/‎2021
OS build 19043.1288
Experience Windows Feature Experience Pack 120.2212.3920.0
[19:17:57] guide me infinity best driver problem
[18:46:10] Nokia C10 (TA-1342) SIM Network Unlocked https://youtu.be/jlGkRRosE9I
[18:31:26] Mobicel fame no back buttons , keeps reebooting after flash
[18:20:14] I think its nokia c1 2nd edition (ta-1380) doesn\'t switch to svc mode. Has android 11.
[18:15:52] \"Nokia C1 2E TA-1380\"
https://www.extra.com/en-bh/mobiles-tablets/mobiles/smartphone/nokia-c1-2e-ta-1380-3g-16gb-blue/p/100288052#:~:text=3G%2C%2016GB%2C%20Blue-,Nokia%20C1%202E%20TA-1380,-%2C%203G%2C%2016GB%2C%20Blue
[18:10:16] Nokia c20 plus
[18:00:20] Anyone tried ta-1380 nokia, not even switching to svc, so cannot read logs or perform any service 🤔
[17:46:27] Nokia C10 (TA-1342) Sim Network Unlock done with infinity cm2 :) https://forum.gsmhosting.com/vbb/f296/nokia-c10-ta-1342-sim-network-unlock-done-infinity-cm2-2990913/#post14466024
[17:14:03] Who has a good firmware for itel A22qualcom
[17:13:42] Hello
[16:57:33] Can\'t flash
[16:51:14] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM18)
MODE : PRELOADER PORT
PORT : 18
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM :
[16:50:37] Yes 👍
[16:47:05] Do format
[16:44:57] Hang on logo
[16:44:47] No
[16:44:20] Phone dead?
[16:41:50] a605g
[16:41:42] samsung clone
[16:41:11] Phone model? What problem in phone?
[16:38:42] Operation : Write Flash [ v2.28 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :10
[FL] : Set : preloader_magc6570_cweg_m.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : recovery.img
[FL] : Set : logo.bin
[FL] : Set : md1rom.img
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x61CA0DA8 [ 1.53 GB
[16:36:00] Always post full logs. What problem in phone?
[16:33:51] plz help me
[16:33:37] CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 49AE0E6BD0324BFA6629C3FCCD025AC9

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Error : HW verification against FW failed!
>>> Check and select CORRECT SETTINGS for your device!

Reconnect Power/Cable!
[16:09:30] Post info logs in diagmode
[16:05:26] Post back pic
[16:04:57] This is it
[16:04:39] Hello, is there someone from the Support Team please? i need help with my dongle
[16:02:16] Model number?
[15:59:40] Yes boss
[15:55:50] Bro
[15:55:44] It IS SPD bri
[15:43:09] how to repair imei Ite l5006c whith cm2?
[15:40:13] Anyone here
[15:16:06] Tecno Bd2p frp pls
[14:58:19] 😔😔
[14:58:18] 🙄🙄
[14:57:57] I need nvram Samsung a12 cm2 file
[14:57:38] Nokia C10 (TA-1342) Sim Network Unlock done with infinity cm2 :) https://forum.gsmhosting.com/vbb/f296/nokia-c10-ta-1342-sim-network-unlock-done-infinity-cm2-2990913/#post14466024
[14:57:34] Some body pls
[14:57:28] Elloooo
[14:53:07] Was it sorted?
[14:44:24] 😨😨
[14:43:43] Pls
[14:43:43] Some body should send my Samsung a12 backup vnram by cm2
[14:43:43] House
[14:43:43] Elloooo
[14:32:35] Thanks best understanding
[14:26:06] Card found : 46CA4A7D , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM5)
MODE : PRELOADER PORT
PORT
[13:30:13] That\'s good news👍
[13:29:04] Simple. Browse the pac file under flash tab, then choose service you want, eg frp, the do the job and you are ✔ done
[13:21:22] DIAG
[13:20:46] How did you insert the pac loader
Mine can\'t see at all after download
[13:18:19] https://forum.gsmhosting.com/vbb/f296/nokia-c10-network-unlock-done-great-cm2-1st-world-2990889/
[13:10:18] Mine removed , used pac loader from support site
[12:52:04] Infinity best activate to cm2 i need best price
[12:30:24] 🤣🤣🤣🤝
[12:29:02] But atleast 90% of the time you reply fast
[12:28:28] Already done bro .with the help of admin
[12:26:44] Come
[12:25:49] You know most of the time our clients come expecting not to leave their phones behind so this really simplifies everything for us #infinityteamthebest
[12:23:26] N the work is done
[12:23:14] 👏👏👏👏👏👏 your the best 👌 bro real time response 💯 👏 👌
[12:23:08] How to do it
[12:14:58] thanks bro
[12:14:39] okay bro
[12:06:25] 88x5pci4
[12:06:20] 465 550 129
[12:02:58] But failed in flash mode
[12:01:24] nothing zero sharing apps
[11:56:57] Help me with cm2
[11:37:51] Ok
[11:33:11] OK u will flash it before rewriting it
[11:32:19] Use cm2 to remove or Nck dongle
[11:31:30] I used oppo driver
[11:31:19] Thanks I\'ve already resolved it
[11:28:46] good no bjr forest. Just open the tool window does not open and quickly disappears
[11:24:45] Goto support & download the mtk driver
[11:23:20] Install the boot pack
[11:12:41] And if install mt2 file, the boot pack appears to be missing
[11:11:47] Please can anyone help me with 64bit mtk driver without me installing it from my device manager, I\'ve tried it but it\'s not working
[10:54:40] Operation : Format FS / Reset Settings [ v2.11 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR651H-F6317-11.0-OP-V043-20210729.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FD
[10:21:23] Tecno PR651h
Any solution
Used pac file as loader to remove FRP but FRP still not cleared
[09:53:32] please help me spiritually
[09:53:18] I even deleted best 2 from my computer and reinstalled it .. the same problem remains
[09:51:38] brother did it
[09:38:56] Thanks sir for support me ✌️
[09:04:42] infinity best 2 no workin help me plz
[09:03:54] help plz
[09:03:47] no workin infinti bes 2
[09:03:37] hello
[07:58:57] I need to this firmware
[07:58:36] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Cont
[07:54:45] Hi guys, is there a way to unlock nokia c1 2nd edition TA 1380?
[07:49:16] I need to itel L6005 copy firmware
[07:49:00] Hello
[07:32:24] But he talking things he don’t know. Im talking with you Admin.
[07:31:12] Always sir
[07:30:29] Is better you close your mouth right? Im not talking with you. Thanks.
[06:53:40] Hy sir
[06:03:01] https://forum.gsmhosting.com/vbb/f296/mobicel-ruby-frp-done-2990824/#post14465805
[06:02:52] https://www.martview-forum.com/threads/mobicel-ruby-frp-done.52615/
[06:02:49] Here is not Banks
[06:02:29] What is your problèm bro
[04:52:28] Admin good morning please refund the owner need the phone

InfinityBoxTalks 2021-10-13

[19:33:20] Try this firmware

https://mega.nz/file/SH5xkYqD#X8C1vfdBa66DGxIuYmQmcZaM5ZJpgtpSZtmzaVrPtMs
[19:03:39] You need to load a new firmware to the device, the factory firmware
[19:03:04] How can I write Imei on Itel A22 without flashing it
[19:02:28] Fulflash with factory signed firmware
[16:30:11] Thank you so much
[16:30:06] Thank you so much
[15:54:57] Nokia 1.4 Hard Rest
[15:21:17] Itel p651w frp
[14:58:48] Factory file
[13:58:18] Always deactivate defender and do your Job
[13:40:14] Tecno spark 7 spd version 11 frp
[13:35:24] But,not fixed
[13:35:02] I did it
[13:34:08] full flash
[13:33:47] What could be the solution
[11:58:06] ......
[11:57:47] # all tecno
# smart 4G
[11:49:37] Is hard work with customers
[11:49:16] Taking to much time
[11:41:25] After unlock mtk phone software shows done or not locked
[10:46:53] Is a phone of customer and he is making noise for me please solve this problem.
[10:45:53] My phone is ready?
[10:45:38] Admin
[09:34:58] Am using 64bit alread bro
[09:27:29] Oky try to use window 10 64 Bits not 32 Bits
[09:23:34] When i change windows works for one day then stops
[09:21:33] Change Window
[09:21:14] Any help here support
[09:17:48] Done still no luck same isssue even installed new windows works the stops gives this massage
[09:17:26] Samsung A11 payment remove
[09:16:03] Uninstalled rebooted and install again but same issue
[09:15:34] Reinstalled still no luck
[09:15:01] re install
[09:01:10] Anyone how will guide me on how to load Mac os on my windows PC cause I\'m finding it difficult all the method I tried failed
[08:53:13] Admin most models mtk sp lock not open i did try it
[08:52:00] Unlocking mtk phone still very had with cm2
[08:47:58] Saver error access denied pls help
[07:35:23] karbonn k9 smart yuva v18 flash tested file pls cm2
[07:18:30] Ok
[07:17:54] Oppo cph1823
[07:16:25] Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : B
[06:07:39] i need help on this firmware plz
[06:07:15] Operation : Identify [ v2.13 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731GEA_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

B
[06:00:46] Any help with tecno can
[06:00:10] Hello
[00:29:02] It\'s mtk phone.
Connect phone in Brom mode both volume keys pressed.
Go to memory tool and erase persist file.
[00:22:03] Disable antivirus and windows defender

InfinityBoxTalks 2021-10-12

[22:09:17] Thanks 👍
[22:08:38] C1 frp not support any tool only factory reset and imei repair with cm2
[21:44:55] How can I remove frp on Nokia c1 with cm2?
[20:51:22] Wiko u 20
[20:50:46] Please will u20 andoid 11 frp Mtk is supposed?????
[20:29:01] Thanks until tomorrow
[20:27:18] No news yet?
[20:27:07] Admin
[17:17:16] Network not work
[17:16:58] Please it IS net problem
[17:15:44] If you have its firmware use maumeta
[17:14:59] I want to write nvram in tecno ke5
[16:33:24] To keep it
[16:30:43] Can\'t backup
[16:29:50] To wnt to kep that firmware or why you wnt to backup
[16:28:47] Want a backup for
[16:28:32] Yep
[16:27:59] What you wnt to archive
[16:26:37] Not read firmware
[16:26:11] X612
[16:25:47] Modèle
[16:24:25] Why cm2mt2 can\'t read firmware?
[16:18:05] Why read pack FW fail
[16:09:34] Good afternoon please I need a solution for the Infinix pr652b password unlock with doing cm2sdp cup secure boot
[15:54:46] Help me firmware file Nokia ta1318 speadtrum
[15:46:39] plz i need this firmware plz admin
[15:19:01] Good afternoon please I need a solution for the Infinix pr652b password unlock with doing cm2sdp cup secure boot
[15:17:08] Waiting
[15:17:06] allright
[15:04:26] Card found : D34629EC , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.2010
[14:54:40] All right trying now
[14:51:08] Senior technicians in the house
[14:50:12] Someone help me please 👏👏
[14:44:10] Team help my CM2 INFINITY DONGLE HAVE BEEN STOLEN 😭
[14:39:54] The model tested above is l5006c not s
[14:38:51] There\'s a different version of a23pro l5006s I guess that\'s where the problem is will post log when I\'ll have another set at hand
[14:35:10] I can\'t find reset privacy rather read privacy
[14:32:03] Please How do I reset itel s15 privacy protection with cm2sp2 .
[14:27:42] Excuse me, Sir. I found it in Infinity Forum
[14:13:29] All right
[14:03:24] Allright
[14:01:46] Nothing yet admin?
[13:40:49] All right
[13:38:58] Locked permanently
[13:38:35] Card found : D34629EC , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.2010
[13:37:07] Now is locked permanently
[13:36:53] Admin
[13:29:56] I\'m not new in the job those two models not booting on any of the said loaders
[13:26:41] For P37 try SC7731E_eMMC_2GB_RS loader. For A23 Pro try all SC9832E loaders one by one. You can also download the .PAC firmware available from the support area and fill in the FDl1 and FDL2. MAKE SURE YOU ARE USING THE CORRECT BOOT KEYS.
[13:19:52] All right
[13:02:07] Infinity cm2 Qualcomm update
[13:00:07] I’m waiting
[13:00:00] All right
[12:59:23] And? Will be unlocked? Or mean repeat the process?
[12:58:19] Say is unlocked but still locked 5 credits gone
[12:57:52] SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.230_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P3_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P3
HW Version: sc7731e_modem
CMP_Time : 05-25-2021 21:34:06

MODEM TAG : MOCORTM_17C_W21.11.2_P3_Debug_FM_BASE_17C_W21.11.2_P3_sc7731e_modem_pike2_pub

NVMng : SecurityInfo
IMEI[1] : 357735914467220
IMEI[2] : 357735914467238
WIFIMAC : 44917C10ADF5
BT_MAC : 44917C10ADF4
SEC
[12:57:52] Card found : D34629EC , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.2010
[12:55:46] All right
[12:52:29] Admin
[12:51:36] Still a lot of new models not supported. Itel p37, a23pro..
[12:50:03] iTel firmware ready for download from Infinity support: W4002, W4003, W5001P, W5002, W5003, W5004, W5005, W5005P
https://infinity-box.com/news/?r=4191
[12:40:56] here you go
[12:38:29] https://mega.nz/file/gqJnyK6A#zZ2V1dG4qZa6pXsxdXefL10EUl-bzyE4zGFdCQA6Ap4
[12:26:39] Card found : D34629EC , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.2010
[12:23:06] Help
[12:23:01] Nokia TA-1342 say unlocked but still locked
[12:22:33] I have an issue
[12:22:28] Hi admi
[11:50:35] Yes thanks ok nw
[11:18:24] Nokia c1 rm-607
Need unlock
355962049853312
Orange 🇫🇷 france
[11:12:48] Pls I need ur assistance
[11:12:24] Pls I try to reset infinix pr652 frp with cm2 but am getting this error
[11:10:39] Good morning admin
[11:06:46] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Miracle USB Port (COM22)
MODE : BOOTROM
PORT : 22
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 8E77B03058B106C8C89D104
[10:55:26] Help me man I want to remove frp
[10:54:46] Available bro
[10:52:30] Anyone with da file of alcatel 5007U
[10:39:18] this file sir
[10:39:03] Operation : Identify [ v2.13 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731GEA_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

B
[10:35:43] im tyring to send
[10:35:43] bro my network is poor
[10:35:07] My cm2 can\'t detect to the computer help... not even recognize
[10:08:39] Thanks done
[09:43:46] coming wait
[09:43:15] let try
[09:41:23] try these two
[09:40:05] here you go
[09:39:40] no need only smart reset extra without holding any key
[09:36:57] Brom mode
tick Sla
Vol+ -
Use memory tool to remove frp
[09:32:58] Pliz help
[09:31:38] no need of tp
[09:26:41] Where is testpoint Samsung a10s
[09:24:36] ok wait let send the da file and try
[09:23:52] not done
[09:20:36] @FlashFileSearchBot
[09:14:33] is it done???
[09:04:00] network unlock
[09:03:59] Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE Blade A3 2019
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!

Boot Done!

>>> Error : Device NOT INITIALIZED ! Initialize it first via \"IDENTIFY\" !
>>> Make sure you have made \"IDENTIFY\" first!

Recon
[09:03:59] Card found : 578909AF , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.11

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.11 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE Blade A3 2019
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
P
[08:58:01] Can you help 😣
[08:56:11] Operation : Identify [ v2.28 ]

Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 22B5D7A87A6692D759CF05DE263C8128
BROM : SecLevel : 0x00000000
BROM : SecMode
[08:29:31] Operation : Identify [ v2.28 ]

Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 22B5D7A87A6692D759CF05DE263C8128
BROM : SecLevel : 0x00000000
BROM : SecMode
[08:19:46] Spd 7731e
[08:18:42] How to remove password in itel A16 plus but data not lose
[08:18:13] Hello
[07:55:36] any help
[07:55:18] Card found : 0CF3A62F , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2021
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Product Brand : Itel
Product Device : W5002
Product Model : itel W5002
Product Name : W5002
Patch Level : QP1A.190711.020
Display ID : W5002-F3110-10.0-OP-V040-20210423
Ver. Incmt : OP-V0
[07:22:17] Team help😭

How do I recover my stolen CM2 dongle
[07:21:56] Hiw to enable diag mode?
[06:21:45] Team help😭

How do I recover my stolen CM2 dongle
[05:49:19] cant flash same backup file
[05:47:49] Card found : 0CF3A62F , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2021
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Product Brand : Itel
Product Device : W5002
Product Model : itel W5002
Product Name : W5002
Patch Level : QP1A.190711.020
Display ID : W5002-F3110-10.0-OP-V040-20210423
Ver. Incmt : OP-V0
[05:34:24] Try in diagmode

InfinityBoxTalks 2021-10-11

[21:42:19] Can I hard reset ta1165 with best dongle?
[19:51:40] It will be a good news, world first
[19:50:35] Soon infinity team will something to do with it mybe weeks
[19:48:55] Android 11
[19:48:36] Any joy with nokia c10 (ta-1342) c20(ta-1352), ta-1380 simlock😢
[19:45:13] Yes
[19:38:11] You must 5 credits to unlock
[19:33:44] Use spredtrum module version 2.11 click sp unlock(diag mode)
[19:31:53] Network unlock??
[19:18:40] I have cm2
[19:14:36] Who can guide me how to unlocl this nokia?
[18:31:33] Hi friends can I wipe Nokia 1 Plus with best dongle
[17:31:41] Infinity pleas help loader for nokia 3.4 and 1.4
[17:27:48] Thanks 😊
[17:26:17] Chsck support area its available
[17:03:08] Support area
[17:02:44] 1. Port is working
2.its MTK mediatek
3.it ready for any flashing methods

Now what you want to do
[16:53:56] With sp2
[16:53:39] Tecno pr651h firmware pac for frp reset
[15:31:49] Hello please i need to cm2 Qualcomm driver
[13:57:11] Help me tecno bc2 firmware
[13:55:59] Pls add cm2 mtk small
[13:55:39] Hi sir
[12:48:58] Sorry offtopic Huawei new cable 10K ohm ... but How many watts?
[12:39:50] Any one can help me NVRAM file for infinix hot 9 (X655)
[11:02:50] Have infinity cm2 dogle
S/N: 40B49580
Firmware version: 0137.02
Want to activate to use CM2SP2 and CM2MT2
what do I do? Can\'t get reseller nearby
[09:53:46] Operation : SP Unlock [ v2.28 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT6739,S01
AP_SWVR : ORA-V083-SKU1-20191123-RA6-D1-OGo
MD_CHIP : MT6739
MD_SWVR : TK_MD_BASIC_HW

IMEI[1] : 355577100169745
ID0 : Lock : Locked! | MNC
[09:53:45] No luck
[09:53:44] Even me too
[08:39:03] Tecno RA7 network unlock cm2 not possible..?
[07:48:57] Nokia c1 TA-1165 frp cm2 support?
[07:42:06] infinix s4 flash file need
[03:17:02] Paid servive sir, If willing inbox please

InfinityBoxTalks 2021-10-10

[21:22:30] Even i wonder.... i used Huawei before and i did not have this problem but after jump to Samsung problem occur
[20:25:02] Thanks infinity teams
[19:07:04] Change CPU try again
[19:04:56] Nokia c20 network unlock????
[18:28:10] 👀
[15:50:43] Thank you👌👍
[15:45:45] P30/128.*
[15:23:03] Remove the back cover and then remove battery.it will be wiser for you to watch the YouTube video on how to dissemble it.
[14:25:32] Thank you for the information👍🏻
[14:25:14] Thank you for the information
[14:24:49] Thank you for the information👍🏻
[14:18:51] Remove battery
[14:08:32] Thank you👍🏻
[14:04:53] Put the phone on charging and leave it for 40min.
[13:52:21] I am in a big problem with the customer, please help me.
I had a problem when reading the information of the oppo A15 phone on the CM2 MTK dongle, the latter turned off after reading the information, and the phone no longer turned on and the computer did not recognize it.😢😱
[12:28:39] 🤷🏾‍♂
[12:19:48] Better to add model by model because you can loose all one hour trying to choose boot by boot
[12:16:19] I think it new not added
[12:15:50] B4 i for get add dis to spd odption itel w6503
[12:15:19] Hmmm
[12:15:18] Hnnn
[12:15:14] Am enjoying my dongle cmw
[12:15:01] 😂😊😄😁
[12:14:57] Protect ur tools it OK just make it flexible
[12:14:23] I use my laptop personly
[12:13:42] Unless if i dnt av one i ask for some one dat av it
[12:13:12] I dnt share tool
[12:12:43] Explain pls
[12:12:37] I dnt get
[12:12:12] I dnt get sory
[12:11:01] For??
[12:10:34] Doing my work
[12:10:26] 1 year enjoying it
[12:10:16] I bought my dongle
[12:10:09] I pay
[12:09:14] 😘😍👍❤️❤️❤️
[12:09:10] Peace
[12:08:33] Wit other tools u can install dem together ......and dey all work
[12:08:09] Like other tools
[12:07:59] People dat have one system (laptop)
[12:07:24] I dnt say u should not protect ur dongle ....just make easy for all.....like people dat can\'t dedicate one system for cm2
[12:05:27] Tool strict
[12:05:18] U security is tool much
[12:05:06] So it work untill i install new tools den it start
[12:04:42] It work cos d harddisk is clean newly istall os
[12:04:03] I always make me system clean unless using other tools
[12:03:37] Am a computer engineer as well i understand wat going
[12:03:11] I do
[12:02:53] I put new harddisk clean den it work
[12:02:38] Wen i insact another harddisk wen my cm2 stop working wen i install other tools
[12:01:56] Leta notice dat
[12:01:42] 😒😒😒
[12:01:42] 😔😔😔
[12:01:40] Only cm² crash in dat aspect while d rest work
[12:01:15] Wat about some one dat got only one system laptop for other tools ......other works other software ....wat would d person do ......hnnnnn
[11:56:21] Many errors software crushing everytime .take long time to open ,open suddenly close ,very hard to stop operation.
Please correct all this .
[11:13:40] 😌😌😌😌
[11:13:38] 🧐🧐🧐🧐
[11:13:29] Yes.....too much police too much security
[11:07:06] Cm2 setup become very hard to use than any box
[10:45:52] unlock tool
[10:17:23] I need dongle
[10:17:14] Hi guys
[09:35:51] Tecno*
[09:35:46] Recno kf8 network lock
[09:35:26] Can someone help ?
[09:27:03] thanks worked
[09:09:50] If i do sp unlock. Boot done . Elapsed done . . . But phone is still locked
[09:09:21] Why my mt2 dont show dorect unlock option
[07:59:16] Input your iOS login details
[07:55:21] Card found : 34EC1EC9 , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...

>>> Remove battery, cable. Check cable and connection. Repeat
[07:16:17] Update still not support neon ray pro
[07:15:18] Neon Ray pro SC9832e fdl not started ... Any solution?
[07:10:39] What problem in phone? Post identify logs.
[07:10:32] What problem in phone? Post identify logs.
[07:10:23] What problem in phone? Post identify logs.
[06:53:12] Hello i need to Calus s11x firmware
[06:52:57] Gionee N5005 firmware please help
[06:52:43] Hello i need to X-inova g9 firmware
[06:48:15] Yeah change emmc ,is not tool problem
[06:46:21] same
[06:46:13] displays hang on logo bro
[06:44:40] I think is dead phone
[06:43:57] Card found : 0CF3A62F , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM29)
MODE : PRELOADER PORT
PORT : 29
Wa
[06:43:14] Card found : 0CF3A62F , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM29)
MODE : PRELOADER PORT
PORT : 29
Wa
[06:40:29] Card found : S/N : 0CF3A62F , v0150
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [
[04:46:04] No way still the same thing sir
[00:34:15] The next update will it be possible?
[00:33:53] That way we will be safe for any new phone in the market don\'t you think so?
[00:33:13] But can you enable diang mode to read firmware in spd2
[00:32:21] For neon ray pro ?

InfinityBoxTalks 2021-10-09

[21:23:57] When will it be kindly work on it
[16:28:55] Anyone with FDL custom file help
[16:28:29] How will I read info or full format the phone
[16:28:07] Neon ray pro I need help
[15:41:47] here is correctly working phone identify
Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM63)
MODE : BOOTROM
PORT : 63
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 45FDEFB60AA85
[15:20:16] Tick svc
[15:20:02] Use cm2scr
[15:09:38] Select sp6815 tick SVC mode and format phone all data will be lost
[15:07:38] spd6530
[15:07:04] Post identify logs
[15:02:48] Which boot you select
[14:47:05] svc mode option hiden
[14:39:14] Redmi 8A. Baseband IMEI, solution
[14:38:55] Tick SVC mode and reset phone
[14:26:01] Which cpu select ?
[14:21:54] Yes
[14:16:28] Diag channel makes many to be lazy. They don\'t need to select boot for using flash mode
[14:15:15] spd v1.27 ?
[14:03:43] Use old SPD v1.24
[14:01:47] You did you have password in phone then why you do FRP?
[13:56:36] Wipe failed!
>>> INFO : FRP reset require FlashMode!
[13:54:22] can i reset with diag mode ?
[13:53:49] Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

BuildInfo : Platform Version: MOCOR_880XG_MODEM_W13.04_Debug
Project Version: sc6820_modem
BASE Version: DM_BASE_12A_W13.04
HW Version: sc6820_modem
01-23-2013 11:06:41
Platform Version:
[13:50:18] Tick diagmode and identify
[13:49:42] SPD but i don\'t know cpu number
[13:48:33] This is Infinity-box Channel
[13:47:59] Just connect the phone and check in device manager which port it mKe
[13:46:39] Did you try formatting the phone?
[13:42:46] password
[13:42:05] Not booting
[13:41:37] no miracle box
[13:41:26] hydra ?
[13:41:04] No
[13:40:58] Use miracle box Clean passcode
[13:40:56] cm2 supported ?
[13:40:41] 8810/6820
[13:40:41] number ?
[13:40:28] Spd
[13:39:32] What problem in phone?
[13:39:23] https://drive.google.com/file/d/1sHpql6jm8CPLKeGYQYnWRfi6JxkzHJmh/view?usp=drivesdk

May be it can help v511
[13:27:37] Inbox
[13:24:18] Thnx sir it has worked
[12:25:45] Uninstalled
[12:20:07] Samsung a225f u2.... Kg lock payjoy remove.. any solution, I tried to complete with unlock tool but after connect to WiFi, it relocks
[12:00:40] Meant uninstalling
[12:00:00] Have finished u installing flexihub sir
[11:54:04] Have just done that
[11:35:12] What do you mean by flexihub?
[11:29:46] Ok
[11:28:26] And it\'s not fixing anything I try report and fix its not fixing anything
[11:27:46] When I try to fix its showing me that there is no report
[11:18:42] Please help me
[11:18:32] I tried fixing but nothing
[11:11:24] Ok
[10:59:21] My Cm2 dingle is saying smart card misconfiguration any help please
[10:31:29] Hello LG g5 Android 7 supported by cm2 ?
[09:58:27] Doro 820 mini da needed
[08:48:47] Hello i have nokia ta-1212 cpu supported i want unlock network plz
[08:12:40] Keep on trying, it will enter
[07:42:00] Cm2 Qualcomm any updates infinity supporter??
[07:29:13] check inbox
[07:28:17] hallo with the phone at now
[06:57:22] Ok
[06:12:09] 40 files/day
[05:42:21] i will try next time
[05:42:10] ok thanks
[05:39:41] SC7731E_BASE SC7731E_eMMC_1GB_0S 10000000000%
[05:27:23] hello how does the cm2 firmware download site work i would like to understand. is there a limited number of downloads per day or what.
[04:34:41] Connect VPN you are good to go
[03:43:15] Re-start system and router
[02:45:03] i cannot login to download files , always getting error IP CHANGED/
[00:28:30] Anyway to boot Iphone x key volume not working on DFU mode please I need help cause I want to flash and is on Iphone disabled

InfinityBoxTalks 2021-10-08

[19:47:13] Which is the good way sir..?
[19:46:48] The file in support is from me... i will try sir
[19:33:05] What is certified? And how was new problem this application
[18:08:55] Yes bro seriously.
[17:28:16] merci
[16:46:39] Post identify logs in flash mode
[16:37:54] Operation : Format FS / Reset Settings [ v2.13 ]
Mode : Forced [ Format FS / Fix ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731GEA_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot se
[16:34:26] even forced format still stuck on logo
[16:30:09] it stuck on logo
[16:29:21] 1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : SPRD ( Legacy )
BuildInfo : s05_q30-user 6.0 MRA58K Android_6.0 release-keys
Platform Version: MOCORTM_14B_MP_7731G_W16.28.2_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W16.28.2
HW Version: sc7731g_CP0_mo
[16:29:15] hellow iget problem with this phone ineed firmware plz
[16:10:48] Yes
[16:05:36] You mean cm2sp2
[16:05:13] Infinity box
[15:56:59] Please hinense u605 network lock which tool can do it
[15:55:56] Check you reader, clean it
[15:33:16] Ok
[15:31:49] Make security backup, nv backup and flash backup.

Next step is risky so do it on your risk.
Download compatible firmware of phone.

Full erase the phone and make full flash.
[15:27:15] There are some clone tecno phones running in market. So before doing any thing in tecno phones always make identify first. Make all security backup also make read flash to be on safe side. It\'s just a suggestion as I see almost all users don\'t do identify first and end up messing up.
[15:23:22] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel W6501
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART :
[15:20:25] Post identify logs
[15:05:51] Use cm2spd2
[15:05:04] Frp
[15:04:18] Ouke boss
[15:03:06] What you want to remove?
[14:58:17] @sahil2000ind @InfinityBoxBot
[14:30:20] Thaanks bro it worked
[13:51:32] Btw
[13:51:08] disable firefly and try again
[13:49:19] Cmd cannot start bro, so no identity logs
[13:48:52] yes I cant see identify logs
[13:47:49] Cant you see, CMD Cannot start so no identity logs😔
[13:47:13] Identify logs
[13:42:59] Remove remote softwares on your pc
[13:42:16] Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : ECC99892D73EC11119BD3A20DE636F4A
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BR
[13:38:06] Yes. Post identify logs
[13:35:07] Hello team what is this?
[13:26:02] In box
[13:25:11] Show me logs bro, from Sw back up...rem mine is mtk not SPD
[13:24:41] How i do that work this mondays
[13:23:50] No support
[13:23:41] Cm2mt2
[13:23:29] Thansk yoi
[13:18:45] Not all is about flash flash flash
[13:18:14] Flash it
[13:05:28] Anyone who can bypass frp tecno BD3 PLEASE HELP.
[12:48:12] Flash
[12:43:38] Was done long ago...se reports here
[12:42:56] Flash or bypass manuel
[12:30:45] Ok
[12:24:03] Best
Best2
Cm2 mtk
[12:22:08] Nokia ta-1212 flash tool?
[12:16:01] i download the neon ray pro file from infinity server load, make identify failed
[12:15:26] neon ray pro read firmware not supported
[12:15:10] Card found : 285613DF , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Product Brand : Safaricom
Product Device : NEON_RAY_PRO
Product Model : NEON_RAY_PRO
Product Name : NEON_RAY_PRO
Patch Level : QP1A.190711.020
Display ID : SFC_NEON RAY PRO_10.0_V01_20200117

[12:03:19] tried all avaliable firmwares i have 5 of them) no result
[12:02:26] Try flash mode!
[12:00:19] i found only one flash file there and same result
[11:58:34] log after operation
[11:57:56] Operation : SP Unlock [ v2.28 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : AE39F8CD0693D02F1F6B9E7C008C7FE3
BROM : SecLevel : 0x000000E7
[11:55:15] https://www.martview-forum.com/threads/sm-a107f-u8-identify-read-firmware-done.52341/
[11:55:08] https://forum.gsmhosting.com/vbb/f296/sm-a107f-u8-identify-read-firmware-done-2990129/