Infinity CM2, Infinity [BEST] @InfinityBoxTalks 28-Apr-2024 [page 52]

[page-1] [page-2] [page-3] [page-4] [page-5] [page-6] [page-7] [page-8] [page-9] [page-10] [page-11] [page-12] [page-13] [page-14] [page-15] [page-16] [page-17] [page-18] [page-19] [page-20] [page-21] [page-22] [page-23] [page-24] [page-25] [page-26] [page-27] [page-28] [page-29] [page-30] [page-31] [page-32] [page-33] [page-34] [page-35] [page-36] [page-37] [page-38] [page-39] [page-40] [page-41] [page-42] [page-43] [page-44] [page-45] [page-46] [page-47] [page-48] [page-49] [page-50] [page-51] [page-52] [page-53] [page-54]

InfinityBoxTalks 2021-12-07

[07:52:09] any one have boot file?
[07:49:43] Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L6503-F6315-10.0-OP-V038-20210719
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

Platform Version: MOCORTM_18B_ITELQ_W21.22.2_Debug
Project Version:
[07:25:44] Hello infinity team
How much credits needed to unlock sony experia f3111 ?
[07:21:23] JTAG for now!
[06:54:15] Please send the solution network unlock of Nokia c1 second generation new model
[06:51:08] Morning my all brother
[06:50:41] i have 2 pc samsung s22 clone for imei repair. inifinty giving erroe hw to solve
[06:40:19] Problem solb
[06:40:02] Vivo y20 Qualcom Qlm ver 1.16support
[06:19:53] How are you explain to me how to fix this
[06:01:26] thks finalu wrk in window 10 after chnge old box to new card reader
[05:55:37] only mtk 1.58 wrking
[05:55:29] okbut ds wrk in win 7
[05:32:14] ok just tell me infinity box wrks in win 10 64 bit. always dngle nt found. cn i get proper drivers if infinity box wrks in win 10
[05:28:26] yup tht d point
[05:15:03] Samsung kg ?
[04:31:21] because there were giving me the same error
[04:30:48] but i removed them
[04:30:31] two boot pack i pasted on the same folder
so that remaned (1)
[04:19:40] Oppo a15 repair to cm2 or
[03:18:11] need help infinity team
[03:18:00] need to unlock invalid zonda mtk device zmtn610 model
how to unlock it with cm2 MModule
[02:16:18] Vivo qualcom ke liye kon sa tool kam kar raha he please reyly

InfinityBoxTalks 2021-12-06

[22:49:44] Itel p36 and p37
[22:48:43] Device type and model
[22:47:38] I\'m having problem with flashing spreadtrum phones, they always freeze until I pull d battery clip
[22:46:39] Thanks Bro many people want to take advantage of me want to collect money from me even people I have helped many times for free I just decided if I can\'t fix I send it back to the owner
[22:33:29] I was using old version tool V12.11 when I already downloaded 12.14 because I was having 2 infinity Dongle after formatting my pc recently I installed 12.11 instead of 12.14 and I downloaded the latest firmware
PR652B-F6317-11.0-OP-V049-20211102
To complete the process
[22:24:37] SOLVED AND FIXED THE EASY BUY
[22:12:04] Hi
[20:56:21] S/N:00F7EB3950
[20:55:59] how to fix ip has been changed while trying to sign into ios
[20:45:24] Pls which cpu am I to use for Tecno wx4 pro frp resetting
[20:32:26] Thank you
[20:32:20] Sorry😅
It\'s working now
It Just want to rename it.
[20:30:11] It\'s deleted frome file after exe run
[20:27:42] It\'s not work😐
[20:19:07] Help plz
No repaire imei options!!!
UK Edition is off
[20:14:56] Disabled svc mode🤔
[19:58:56] Thanks
[19:58:52] OK
[19:55:10] Thanks
[19:54:42] Upgrad smartcard OK
[19:50:47] free memory
[19:50:19] Erase Avator activation ?
[19:48:39] I have smart cards, but only one is CM2
[19:45:18] 00251956FB
[19:44:10] After activation SPT+ GRT problem upgrad card
[19:42:45] Extended info: Card returned error message . ISO7816 error 0x6A86 (Wrong parameter(s) P1-P2. Incorrect parameters P1-P2 )
[19:42:29] SerialNumber: 000256FB
[19:41:24] Hi! Pleas help after Upgrad smartcard problem
[18:19:47] my username:00F7EB3950
[18:19:05] how to fix ip has been changed while trying to sign into ios
[17:23:10] Time to end yet
[17:22:55] Re-new support
[17:22:45] Time to end yet
[17:14:33] Tecno spark 7p
[17:14:22] Model
[17:09:52] Need format FS + FRP
[16:45:06] Inbox
[16:44:28] How ti check expr on cm2
[15:28:11] Firmware version: 0145.02
\"UK Edition\" status: On
Last launched Application: 0030 v.0229
=> Activations:
- 00: Infinity-Box/Dongle v0145
- 02: #2 v0122
- 03: [BEST] v0122
- 07: #7
- 0E: #14
- 0F: #15
=> Options:
- Infinity-Box/Dongle
- Infinity BEST2
- Infinity SM
- hua
- amt
[15:25:58] === Started: 2021-12-06 16:23:51 ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication successfull
Service stage 1 confirmed
Securing session...
Session secured Ok
Updating...
Wait 4-5 minutes, DO NOT disconnect Smart-Card
Card returned error: 6A84 at 25842/32578
Error upgrading applets:
Card returned error: 6A84 at 25842/32578
Disconnected
[15:17:49] Firmware version: 0151.02
[15:16:27] Hua not found
[15:16:20] => Options:
- Infinity-Box/Dongle [CM2]
- Infinity [BEST2]
- Infinity Data Explorer
- Infinity SM
- spt
- avator
- grt
[15:15:09] HI! After activation GRT Erase Activation Hua .Pleas help
[13:59:57] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : W6502(1).
Sending Init Boot ...
[13:58:09] getting that error from the one i download
[13:57:39] itel W6502 boot file
help
[13:44:33] A125f mkopa remove solution please using cm2
[13:39:29] Why is it so hard to read firmware for Nokia C1
[13:39:23] Only prblm with cm2mt2 tool.. other tools are working
[13:33:50] Now I\'m format my pc.. and install google chrome , cm2 manager and cm2mt2 v2.30 ... still only logo
[12:51:10] Server answer 0007 error
[12:22:27] Y20 no conect no responce
[10:10:21] my sp2 version 2.13 has no security repairs please help
[10:07:29] Frp
[09:57:50] Plse add Qualcomm now it\'s toooo late
[09:28:54] need help for tecno kf7j frp
[08:00:36] Reply problem
[07:55:13] Vivo y20 no conect
[07:53:28] All model sho nahi
[07:50:23] Cm2 mt2 v2.30 no work
[07:33:46] Nokia Ta1380 unlock is it supported yet by Cm2
[07:31:27] Still not working
[07:31:04] Pls give me a solution
[07:24:22] Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Identify [ v2.30 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CO
[07:01:24] === DongleManager [Infinity] v1.88 [12/6/2021 12:30:42 PM] ===
Searching...
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 0003936C15BF1292
Box/Dongle found: Infinity [BEST]
Reading...
Serial No (S/N): EE67936C
Firmware version: 0122.02
=== Started: 12/6/2021 12:30:43 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication stage error:
Server answer: [
[07:01:21] but when i try to update dongle with dongle manager it says
[06:59:27] after do all things
[06:59:17] now it ask this
[06:59:10] hi friend
[06:19:33] Now V2.28 also not working.. only logo..
[05:54:34] Please give me a solution
[05:15:32] When i flash with 4 files error (pit) but what i did is...
I read file via Memory tool (cm2) and write in phone now phone alive again though Mkopa is stil exists..!
[04:51:09] tried but nt deleted. we need flexihub too for online wrk. hw mny tys we will delete tht
[04:50:20] bro just telll whts going on. why to difficult to run infinity nw days. plz make sun changes in software. unless wasted money. we dnt have tht much tym solve infinty prob.
[04:48:58] nopes. nt able to run. only logo appears after tht nthg happn
[04:03:56] To remove frp
[03:56:11] Hello good morning.. still same problem..

InfinityBoxTalks 2021-12-05

[23:12:32] Thank you so much
[23:11:23] Activated and ready to go
[22:27:31] Or do I need to activate?
[19:41:02] Ok thank you sir
[19:19:06] go to the flash table double tap navigate where you saved your file you will find it.
[18:29:24] Sir, but after reading it with cm2sp2 I\'m unable to see .pac their
[18:19:09] hi who can help me with flexihub or teamviewer to rewrite the firmware to this alcatel pixi 3 9022x Wind with cm2 dongle please
[18:01:21] Thanks
[17:53:16] Spd moode
No imei repaire options?
[17:15:32] Yes
[17:14:43] Alibaba
[16:49:18] Contact me pls
[16:29:19] Cm2 CPUs better*
[16:28:45] Please assist me with the link to know about cm2 better🙏
[16:27:06] Why do spd phones hang alot
[16:19:18] I\'ll reply little bit later
[16:18:52] Okk I\'ll try
[15:47:22] Got 8 threads detected
[15:47:01] Still scaning
[15:26:04] Good day team pls how can i read spd phones and also use it to flash
[15:17:11] Thanks, how can I get d full picture
[15:04:47] No have cm2qlm
[15:03:31] Hi bro who can help me with this alcatel pixi 3 9022x write the firmware
[14:18:36] Other cm2 tools are still working.. but mt2 2.30 not open and 2.28 got error massage..
[14:12:49] Dose anyone has any updates on infinitybest CM2 MT2 2.30 SMART RESET DATA SAFE
[13:54:07] No.. v2.30 not open.. only shows logo and hide.. but V2.28 open and when doing reset I got error massage
[13:51:27] I\'m sorry. I dont have this kind of drivers.
[13:48:53] Ok
[13:48:10] Ok
[13:47:47] I never using..
[13:47:29] No
[13:47:04] But still same error
[13:46:51] No.. I checked this way and I got massage no any kind of issues.. but still same problem. I mean 2.30 not open. 2.28 is open. But
[13:44:43] 2.30v not open still... only logo
[13:44:23] I got massage no any issues..
[13:19:11] Anydesk
[13:15:41] No hot..
[13:15:24] Not open .. only infinity logo
[13:14:31] Then??
[13:13:40] 4E9C7661
[13:12:09] I\'ll send
[13:12:01] Before working perfectly. And now I\'m using 2.28.. but same prb
[13:11:25] I think after update mtk2 tool from 2.28 to 2.30 this prb came.
[13:10:33] I tried step by step.. but still same problem
[13:02:52] I can\'t see the question
[13:01:08] יש תמיכה בעברית?
[13:00:38] Sowhat v2 firmware plz
[12:56:26] Okk I\'ll try
[12:53:57] Please
[12:53:23] When I reset a037f I got this error message
[12:44:52] https://www.youtube.com/watch?v=j7cEbC0GzJs&ab_channel=Angelmobile
[12:31:33] https://www.youtube.com/watch?v=j7cEbC0GzJs&ab_channel=Angelmobile
[12:19:51] HELP
[12:18:58] 30min wait
[12:18:48] https://youtube.com/channel/UCR_cazK7561hN2keEHdhyKQ
[12:18:04] Cm2 new setup not working video upload soon subscribe my chanel
[12:03:12] FRP REMOVED BUT STILL THERE SAMSUNG A037F Operation : Reset Settings/Format FS [ v2.30 ]

Mode : FULL FACTORY ( FORCED + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM25)
MODE : PRELOADER PORT
PORT : 25
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000

[11:08:42] There\'s a lot of messages here maybe we can do it privately via WhatsApp
[10:57:17] Is bd2p spreadtrum?
[10:40:39] After Flash
[10:30:37] Uninstall and install it again your problem will be solved
[10:08:31] ???
[10:00:19] Flash firmware
[09:59:44] Hi bro who can help me with this alcatel pixi 3 9022x write the firmware
[09:46:42] 🙏pls cm2 should organise their da so that\'s it should be easy to use, we don\'t have to be selecting all the da one by one before we can select the correct one even with sla ticked
[09:14:51] I am having issues login into infinity best and cm2 online access with the username and password generated from dongle manager. It keeps saying wrong details I need help
[09:14:09] OK I will do so
[08:45:58] I used Raphael v2 and legacies still d same
[08:45:15] I did, but it did not
[08:39:02] For removing KG status from Samsung phones and also use full for phones with Rpmb protection when changing chip
[08:18:45] I need help to smart reset it
[08:18:45] Tecno bd3 platform please
[08:06:43] Can I get a Tested file for Nokia Ta 1029?
[07:45:09] Alcatel 5007u
[07:44:44] Help me with the firmware for Alcatel 1v
[07:06:15] Check if username and password is correct. Internet connection must be good. try and post logs again
[04:58:56] rest all files deleted
[04:12:32] Operation : Read Firmware [ v2.30 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT8163 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : MEID : CA60B1AD4FB61233AB41C921D168E4BD
BROM : SecL
[00:10:27] عالم البرمجه
عالم البرمجه/للمبرمج أشرف الحطامي
https://t.me/AsharfAlHatami

InfinityBoxTalks 2021-12-04

[19:36:44] Ok
[19:36:16] Try the normal way
[19:35:56] Meta mood
[19:35:14] Which ways have you tried?
[19:27:53] Help plz
[19:07:16] Infinix hot 10i
I want to repaire imei
How can i connect it in meta mood?
I thair another solution???
[19:06:57] nokia ta 1264 network unlock
[18:55:42] Yes
[18:21:18] Okay
[18:14:45] How much activion
[17:32:57] Serial No (S/N): 3F2F39B5
[16:48:35] U can\'t flash phone on diagmode
[16:02:48] And it do bring this msg\"Access violation at address 0055EF13 in module CM2MT2.exe.Read of address 00000003.
Pls how do I fix this
[15:59:04] Operation : Identify [ v2.30 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 8A2899E537F0780618BABFA935110B67
BROM : SecLevel : 0x00000000
BROM : SecMode
[15:44:30] Can\'t read firmware file
[15:44:30] Its oppo R830
[15:44:30] Operation : Identify [ v2.30 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 8A2899E537F0780618BABFA935110B67
BROM : SecLevel : 0x00000000
BROM : SecMode
[15:44:30] how to fix port failed to open
[15:44:30] CM2 activation went well. I will find installation files somewhere. Thank you
[15:21:19] I didn\'t need it 😁 I was just curious. OK.Thanks
[15:15:50] TA-1359
[15:15:09] all dne but still same. can u solve it for me on team viewer
[15:12:46] Any idea
[15:12:46] 🙏 thank you sir
[15:10:23] GRT supoort OFF
[15:09:36] laelo not supported f127g
[15:09:36] hello friends
[15:09:35] but so hard to run infinty. frm lsdt week m trying
[15:08:42] ok 😞
[15:08:42] Activation CM2 GRT
[15:08:16] and my status s active till next dec
[15:08:02] i hd uninstaled flexihub few days before
[15:08:02] Hi!Pleas instal files GRT dongle.Thanks
[15:06:46] ok
[15:06:09] yes
[15:05:43] dne but still same
[15:05:18] i feel my dngle is nt active for tht pcks can u chk it i have to so sum wrk
[15:05:10] neutralized
[15:05:10] only 2 found
[14:51:01] Ask for Fdl i have the boot I used that boot same
[14:50:48] https://youtu.be/zbcRzARKtLs
[14:48:42] evn no fault bin found in isntalltion folder.
[14:47:40] bro i m using inifity box in window 7. fresh window installed mtk 1.58 wrking well rest no else infity software opeing
[14:46:32] same no other dngle connected
[13:48:15] thanks for your support
[13:48:02] anyway i will install windows again and try
[13:47:40] autoruns for windows report
[13:44:11] Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

BREAK : Device not found!
HINT : Check cable, connection and drivers!

Reconnect Power/Cable!
[13:10:33] dngle software alread updated to 1.57. plz help
[13:09:07] helo. i m nt able open mt2 frm sum days. on window 10 its giving error module nt active and on windw 7 soft open nd close. alrdy support renwed till next yr
[13:06:00] Ok
[12:25:03] Connection failed :socket error #10013
Access denied
[12:22:39] Ok
[12:22:29] HWID:000108317CEA4082
[12:20:53] 000108317
[12:18:15] 00000831
[12:15:23] Please I need help.
Trying to get my username and password from my best dongle but I keep getting the error
“Box/Dongle misconfiguration”
[11:52:00] ??? Unable to read info or do anything
[11:31:55] The device is an EASY BUY
[11:15:37] ok
[11:08:37] Spd
[10:53:15] or any usb sharing softwares
[10:52:57] searched but bot found i didnt use flexihub
[10:50:39] 3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR652B-F6317-11.0-OP-V036-20210708.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0xE8EECADC
ProtoEx : : TRCC not supported!
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x4A
PMTMng : Update failed!
ERROR : 000000B9:B9000000FF467E00
G
[10:48:58] ok
[10:47:50] sigmakey is conflit with cm2??
[10:47:38] no
[10:47:21] yes yes i have search in with windows search option
[10:46:02] may be windows corruption ???
[10:45:29] in system32 forlser
[10:45:20] no files for thesenames
[10:41:06] and that time the light of the dongle also off
[10:40:40] when i run 2.30 as admin mode it shows infinity logo and disappear
[10:39:23] before in verdion2.28 itworks fine
[10:38:46] ill give you teaviewer
[10:38:37] Okay
[10:38:37] can you log into my pc
[10:37:48] cm2mt2
[10:37:07] all orther versions like mtk spd ast best all are working fine
[10:36:30] i try but no any files in my pc
[10:19:57] HOW TO FIX INFINIX EASY BUY DEVICE REFUSE TO FLASH
[10:07:59] Not loading
[09:03:20] Need help SPD easy buy
[08:54:29] Model
[08:46:55] techo spark 7 spd frp
[08:36:54] Infinity cant load this file
[08:03:28] Are u though
[07:50:07] i try but it no work for me
[07:27:37] Drivers ok all done
[07:27:21] My SIM card dongle not connected to pc !! How to solve it? Thanks
[06:43:53] === DongleManager [Infinity] v1.88 [12/4/2021 12:13:41 PM] ===
Searching...
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 0003936C15BF1292
Box/Dongle found: Infinity [BEST]
Serial No (S/N): EE67936C
Firmware version: 0122.02
\"UK Edition\" status: Off
Last launched Application: 0031 v.0122
=> Activations:
- 00: Infinity-Box/Dongle [CM2] v0150
- 03: Infinity [BEST] v0122
=> Options:
- Infinity [BEST]
- Infinity [BEST2]
[06:43:38] Searching...
Username: 03EE67936C
==> Scan c:\\users\\keerthi\\downloads\\donglemanager for report.log
==> Scan c:\\InfinityBox for report.log
==> Scan c:\\Program Files for report.log
Found files: 0
==> Scan c:\\users\\keerthi\\downloads\\donglemanager for *.ibin.log
==> Scan c:\\InfinityBox for *.ibin.log
==> Scan c:\\Program Files for *.ibin.log
Found files: 0
==> Scan c:\\users\\keerthi\\downloads\\donglemanager for fault.bin
==> Scan c:\\InfinityBox for fault.bin
==> Scan c:\\Program Files for fault.bin
Found files: 0
N
[06:34:34] try to restore the relevant nvram to it and restore later
[06:18:44] Admin how to use the file as file?
[06:17:59] I have downloaded the file from support load it flash but it sat FDL not initialized
[06:17:19] Neon Ray Pro hangs on logo
[05:28:01] Help requered NV data ZTE L130 speadtrum lmel null
[03:09:13] Ho to solved problem
[01:07:15] Can anyone help me

To enter diag mode on scv43

Not working codes *#0808#

##366633#

##3424#

Any way
Im using laelo tool, but none of the codes they say does not work.
[01:05:58] I bought it from gsmfather
[01:04:51] Capital letter sorry.
[01:04:44] sony6H7W8R
[01:03:37] Sony6h7w8r
[00:59:16] Is qunlock s1 tool for sony server down? Remote dongle not available is written?
[00:43:04] Infinity do you have plan adding jtag in the future?

InfinityBoxTalks 2021-12-03

[23:03:20] 👍💐
[22:59:47] Any way
[22:59:46] ##3424#
[22:59:46] ##366633#
[22:59:46] Not working codes *#0808#
[22:59:45] To enter diag mode on scv43
[22:59:45] Can anyone help me
[22:00:25] After some times
[21:10:24] Or reset with the keys. Hard reset
[21:10:24] Flash with 4 files bro
[21:10:13] Any way
[21:10:07] ##3424#
[21:09:57] ##366633#
[21:09:44] Not working codes *#0808#
[21:08:52] To enter diag mode on scv43
[21:08:37] Can anyone help me
[18:57:21] Samsung A12 M-Kopa after format+flash now hang on download mode, any solution ?
[18:27:25] What is the cpu bro
[18:11:30] This flash for Cc1 pro CPU MTK
My phone in hand cpu spd
[17:28:38] Any solution please?
[17:17:36] HWID: 01089F8620281292
[17:12:15] Mean copy /paste here
HWID text ?
[16:59:50] How work?
[16:59:20] It\'s work now
You are the best⚘❤⚘❤
[16:53:37] Please any solution
[16:52:45] My account temporary suspended
[16:52:00] Non here any dongles connected in pc
[16:46:46] Cm2
[16:46:42] I have problem in dongle
[16:46:08] Hi
[16:22:27] ok bro
[15:44:04] unlock REVVL4 5007z metro is it supported by cm2?
[15:36:09] Ok let me get them
[15:34:03] How can I get them
[15:33:20] After I run exe and want to exit
[15:32:32] disable Windows Antivirus and Windows Defender Firewalls.
[15:30:35] Thank you infinity cm2 ♾
[15:23:27] How to unlock alcatel 5041c with cm2
[15:13:07] How can I unlock Oppo Qualcom password lock?
[14:50:04] Oppo a5s repair IMEI solution
[14:36:31] I am a have infinity cm2 and miracle box all not done?
[14:34:10] You mean frp bypass?
[14:30:51] need fdl tecno spark 7 pr651e
[14:22:15] 👍
[14:21:57] Most of time , if you unlock bootloader , device stuck on logo then you need to flash it!
[14:20:38] But I didn\'t unlock Bootloader again
[14:20:23] Yes
[14:18:24] Problem solved?
[14:17:42] Yes
[14:17:38] Yes.
I have done that
[14:16:37] Need to flash firmware
[14:10:11] Tecno KG6,
Android 11,
Stock on 1st boot LOGO after unlocked Bootloader
[13:49:32] Okay, thanks
[13:41:05] Please are these the same??
[13:39:32] boss
[13:39:26] it wont ask for any code or something it acceps the sim card but no service cuz in turkey no other phone works more than 3 months unless u register it on network permenently or some software engineer will register it until u reset the phone it locks and wont accept sim and have to be re register boos
[13:27:42] ok Thank you so much
[13:16:20] Help for compatibility by searching the most important model type name
[13:13:20] I want a flash drive for this device, but I can\'t find it anywhere
[12:55:30] Hi
[12:40:53] Mtk
[11:57:19] Where instruction??????
[11:50:27] Alcatel 5030d unlock??
[11:43:19] Ok
[11:39:26] Cm2 v2.30 has a option of reset without dataloss .but when trying to use that option it shows a warning message by saying Data might be lost.please need clarification
[11:37:12] Yes
And now what should i do???
[11:36:11] Infinity Device & SoC database available right at Infinity web page

https://infinity-box.com/support/?r=100167
[08:02:44] It\'s open empty!!!
[08:01:45] What this message??
[07:32:43] This this data safe section work? I have infinix phone to reset without dataloss
[07:31:29] Almost all spd simlock need credits
[05:15:46] Username: 0xxxxxxxx
==> Scan C:\\Users\\KEERTHI\\Downloads\\DongleManager for report.log
==> Scan c:\\InfinityBox for report.log
==> Scan c:\\Program Files for report.log
Found files: 0
==> Scan C:\\Users\\KEERTHI\\Downloads\\DongleManager for *.ibin.log
==> Scan c:\\InfinityBox for *.ibin.log
==> Scan c:\\Program Files for *.ibin.log
Found files: 0
==> Scan C:\\Users\\KEERTHI\\Downloads\\DongleManager for fault.bin
==> Scan c:\\InfinityBox for fault.bin
==> Scan c:\\Program Files for fault.bin
Found files: 0
No reports foun
[05:15:27] here is scan report of my dongle
[00:36:08] not mine actually my client has it
[00:35:13] Yeah i have Xiaomi lite 11 network lock which turkish network lock which we discuessed about it a a week agı sir

InfinityBoxTalks 2021-12-02

[19:31:32] good day how to unlock lock code nokia TA1322
[18:20:47] File link
[17:16:07] Try sigma to unlock ADB
[16:55:41] Same problem here
[16:55:16] I went there I couldn\'t get any solution please
[16:36:44] في حدا عربي يا جماعة وقديم بالمصلحة
عندي كم سؤال مشان الدونجل
انا جديد عهالشغلة
بس كم سؤال ع الماشي اذا في مجال
[16:09:17] Pls how to update my cm2 dongle
[15:50:57] ok good
[15:50:33] yes
[15:49:19] done?
[15:46:06] Ok i will do it and tell you thanks for quick reply
[15:43:11] Can u give me a solution please windows 10 pc
[15:42:34] Hi after install 2.30 mt2 was not open in my pc
[15:23:58] Use cm2 spd2
[15:18:59] No please
[15:15:22] You\'ve the da file?
[15:12:24] Pls show me the procedure
[15:07:33] Chat me up
[15:07:08] Create a file for it
[15:06:49] Choose techno collect mixed boot
[14:58:53] you could show me how to do it
[14:58:11] DA error
[14:57:01] How to do a frp bypass on tecno kf7j
[14:54:23] Please help me
[14:53:18] Itel SA2 is free
[14:52:53] 5credits
[14:50:26] Bad firmware
Flash with different an latest firmware
[14:41:51] Okay
[14:40:04] The software is corrupted and I need to flash it but its always given warning me to select correct da file
[14:35:33] Please I need tenco cx da file link
[14:33:16] YES
[14:17:09] Okay checking
[14:16:39] The infinity logo will appear and vanish instantly
[14:15:10] The version 2.30 Not opening at all
[14:13:59] 2.30 not working
[14:13:06] Any solution please
[14:12:59] Cm2MT2 failing many times
[14:04:41] any solution to it
[14:03:47] كل
[14:03:28] okay thanks?
[13:51:01] can you please add free unlock mobicel rio without credits?
[13:49:46] Is there any solution for ta-1235 flashing?
[13:49:01] Cm2 fail many time now before work fine.
[13:47:22] New mt2 2.30 infinx fail I try many time chk plse
[13:43:53] Infinity Chinese Miracle-2 CM2MT2 v2.30 - More models & Features
[13:38:07] NOW UPDATE V2.30
[13:37:08] how much credits needed to unlock itel a14?
[13:35:36] how much credits needed to unlock mobicel rio ss?
[13:33:02] 2.30
[13:31:23] yes
[12:37:44] thank you, i will try there
[12:21:24] Even after disable anti virus same error
[12:20:14] 3CBACFC4
[12:19:16] You can update dongle firmware now to get it upgraded
[12:09:06] Check battery voltage
[12:03:34] ???
What this message??
[12:02:58] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Identify [ v2.30 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Wa
[11:46:41] Try in hovatek
[10:40:47] thank you
[10:40:41] i see
[10:39:12] Nothing found
[10:37:03] 🙏🏾
[10:35:47] am searching: Tecno KF7j-H696RTAjAk-R-OP
[10:34:16] hello, please remind me of flash files searching bot
[10:23:04] Thank bro
[09:54:32] I have infinity best dongle
[09:54:19] plz help me
[09:54:17] nokia 501 rm -902 secryti kod
[09:45:10] but still same
[09:45:06] delete done
[09:43:24] kindly help i unistall all sharing softwrae and disabel antivirus but still same issue cm2 not opening
[09:42:40] Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Username: 001E5A1A8F
==> Scan c:\\InfinityBox for report.log
==> Scan c:\\Program Files for report.log
==> Scan d:\\Program Files for report.log
==> Scan c:\\Program Files (x86) for report.log
Found files: 0
==> Scan c:\\InfinityBox for *.ibin.log
==> Scan c:\\Program Files for *.ibin.log
==> Scan d:\\Program Files for *.ibin.log
==> Scan c:\\Program Files (x86) for *.ibin.log
Found files: 0
==> Scan c:\\InfinityBox for fault.bin
==> Scan c:\\Program Files for fault
[09:39:16] ooop set the downloads path directory first
[09:36:39] bro where can i download
[09:18:39] Some one please help me👏👏
[09:07:39] Please I need itel l6004 boot
[08:58:00] BRO READ CAREFUL THE RESULTS...SET THE FOLDER FOR DOWNLOADS
[08:23:41] plz
[08:23:39] Help me
[08:23:20] Hello Nokia 501 rm-902 no file
[07:50:49] nelp
[07:50:42] Nokia TA 1322 password reset
[07:50:33] hello everyone
[07:06:14] Repair IMEI.
[07:00:49] After flash format flashing on cm2 I lost the IMEI what’s the solution?
[06:59:24] Thank you sir now I can
[06:48:09] 2.14
[06:47:08] Ver 2.13
[06:47:01] No uk folder in spd folder
[06:46:38] Uk edition is off
[06:45:59] Cm2 spd problem
No repair imei option
[06:30:21] Hi
Any solution for dead ta-1235?
Phone dead by miracle flash
Have cm2mtk nv backup
[05:43:24] With cm2
[05:43:13] Nokia c10 ho to unlock Network
[05:04:20] c10 is spd phone not mtk boss…so you must launch cm2sp2

InfinityBoxTalks 2021-12-01

[23:16:01] I\'ve tried some phones with format data safe but why can\'t it work out, and which phones can it work on
[23:04:45] Who has flashed OPPO A93 with CM2
[23:04:01] Any solution?
[23:03:52] ITEL P36 EASY BUY
[23:02:48] Good morning
[22:46:27] What\'s the difference between CM2MT2 and CM2MTK?
[21:36:04] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Identify [ v2.30 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Wa
[21:00:30] .
[21:00:28] Diag mood???
[18:37:21] diag mode you can find just next too the s p unlock
[18:36:07] no need too press any key just select click on diag mode ans enter your phone in too usb cable
[17:27:43] Plz help
I have the dongle since about 10 days
And for now i can\'t do any thing
[17:23:06] When connect the phone with hold to volume keys
It give this
[16:51:24] ITEL P36 EASY BUY
[16:10:34] BROM : SOCID : E25930C4657917E6F9C65B66A3194084CD510FF6A8AE4C11CF63A3B023E12E00
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6752
EMI : SRC : preloader_f5c62w_leagoo2.bin
EMI : CNT : 0004
E
[15:36:52] https://t.me/smafiofficial
[15:23:59] Itel w6502 fdl file needed
[15:22:37] Diag mode
[15:11:42] Nokia c10 network unlock plz how to do it with cm2
[15:10:48] Nokia c10 unlock
[14:31:35] Tuko bro
[14:30:10] samsung ao2 frp still exist
[14:29:36] Operation : Reset Settings/Format FS [ v2.30 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM12)
MODE : BOOTROM
PORT : 12
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 68015DC18CAB7BE279167CCF6
[14:10:34] any guid
[14:10:29] how to repair emmc read only with cm2 mtk2 ?
[14:06:19] Relock solution
[14:06:04] Ce7j camon 16
[14:05:51] 10.0
[14:05:31] Model and version
[14:05:19] Model and version
[14:04:48] Relock solution
[13:56:41] Hello Ineed x573 readed firmware
[13:55:11] Hello
[13:17:00] Any help
[13:16:39] Hello
Ce7j relock
[12:42:46] please help....
[12:42:25] file download but this is not use in both software
[12:41:53] but i cant find file and proccer
[12:41:42] have best and cm2
[12:41:35] how to flash nokia ta1188 nokia 2.2 hang in logo
[12:39:57] thnx
[12:38:52] JTAG only for now
[12:36:32] I did search on infinity support area but nothing, except flashing file only that I find infinity support
[12:19:24] plzz any solution too hard reset it?
[12:16:05] it was my mistake i checkd in my account i have got charged for only 5 credit ..so thnx for that
[12:03:20] Help on Itel w6502 boot file
[11:51:15] nokia c1 2nd edition any news for password remove?
[11:29:28] I still have problem with this phone
[11:18:30] Itel w6502 frp boot file please help
[10:44:05] It\'s not working
[10:41:25] Hello this phone have diag level disabled at second stage
[10:26:08] Any news on Nokia 1380 network unlock?
[10:23:45] The device power on
[10:22:04] Volume keys?
[10:19:12] Need driver
[10:16:13] Ok
[10:15:28] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Identify [ v2.30 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Wa
[10:13:16] MTK
[10:12:57] Show complete logs
[10:12:53] SPD!? Or MTK ?
[09:58:12] 👋
Device: tecno spark 7
When pres repair security to repaire imei
It give this message
Error secure BOOT:selected da not supported in current device state
[09:30:36] thnk you its done
[09:28:00] System won\'t chan
[09:27:36] ok
[09:27:19] click YEs
[09:25:59] show me ios order screen if u want are u sure is the same phone? anyway post unlock logs forum
[09:24:50] My brother just wait few minutes after you can try it again yours phone will be done
[09:24:08] but its till showing this sir
[09:23:45] order status shows completed
[09:18:23] Software only charge once, please wait 10, 15 min, processing time can take 1h - 12h, also login into your IOS and check order status if complete try again!
[09:18:16] pls share preloader Samsung A02
[09:17:48] Ok Thank you sir .... we will wait for next new updates from you
[09:16:23] INFINITY-BOX Team are working in new features and improvements! stay tuned for next UPDATES
[09:15:39] trying after 30 mints show me this again
[09:15:26] nokia c10 network unlock credit deduted twice still not unlock
[09:14:25] Ok sir but when are you going to add this model
[09:13:17] Hello this phone have diag level disabled ate second stage
[09:11:56] Any solution sir Yuran Williams
[09:05:16] c10 network unlock possible with cm2?
[08:48:52] See
[08:48:44] Bro
[08:47:11] Operation : Reset Settings/Format FS [ v2.28 ]

Mode : FULL FACTORY ( WIPE + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
[08:46:17] Operation : Format FS / Reset Settings [ v2.12 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData
>>> INFO : FRP reset require FlashMode!

Reconnect Power/Cable!

Done!
Elapsed: 00:00:20
success tecno BD2 Thanx @in
[08:42:28] how to remove frp tecno BD2 with cm2 spd2 help tea @infinity talks
[08:42:26] 🙏🙏
[08:40:07] help me file
[08:39:51] Product Brand : TECNO
Product Device : TECNO-BD3
Product Model : TECNO BD3
Product Name : BD3-OP
Patch Level : RP1A.200720.011
Display ID : BD3-WZ802AB-RGo-OP-210617V015
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-06-05
Build Time : 17.06.2021
Product Info : BD3-OP
Product Board : bd3
Board Platform : mt6580
Product Manfct : TECNO MOBILE LIMITED

USERDATA :
[08:34:20] It cant boot
[08:27:55] How to remove frp in tecno pop5 help me
[08:12:38] Any solution fr this relock devices easybuy
[07:51:48] Nope
[07:27:10] Easy busy
[07:13:28] I have done a dozen of this 💯💯 eachtime
[07:12:55] Read firmware first very important then re write same firmware but tick format box n flash
[07:12:55] yes
[07:07:59] Have u solve the issues
[06:51:07] Hello any success
[06:42:46] Plz anyone give me realmee c21 CM2 read file
[06:29:52] nokia C20 network unlock is it possible?
[00:01:19] https://www.mediafire.com/file/dbemgq5o95uz91x/Tecno_KA6_MT6580_V086_181029.zip/file

InfinityBoxTalks 2021-11-30

[23:41:21] Good evening guy I need KA6 Firmware
[23:33:47] https://support.halabtech.com/index.php?a=downloads&b=file&id=394373
[22:38:24] https://youtu.be/4mZMBpJdO30
[21:49:00] Run this to 2command
[21:48:49] Winmgmt /resetrepository %windir%\\System32\\wbem
[21:48:32] Winmgmt /salvagerepository %windir%\\System32\\wbem
[21:48:05] And
[21:48:03] Stop this Windows Instrumentation Management
[21:38:46] Done i fix it
[21:16:36] Alright
[21:15:00] Ok, but sorry what time of service can be offered with online services
[21:00:27] Help unlock 9032z alcatel
[20:50:30] Help unlock 9032z alcatel
[20:42:54] No bro this one has new security am sure. It cant enter diag mode
[20:37:47] Please @infinity is it possible to use all infinity service like the spd, mtk tools and the likes, can it be used with Online server with login details only
[20:35:41] Can you help me with teamviwer or ultra viwer
[20:35:10] Same
[20:21:25] FrP file
[20:21:13] Help pls
[20:20:04] ??
[20:14:56] Frp file
[20:14:44] Pls I need itelw6502
[20:14:35] 😥
[20:14:17] Nothing found
[20:11:50] zm1027tn-mb-v1.1 2015-06-13
[20:08:10] 😥😥
[20:07:55] Same sir
[20:00:10] Reboot same
[19:59:56] I installed again same
[19:59:29] Yesterday work perfect all modules
[19:58:55] No sir same
[19:52:09] Please any help
[19:52:05] I tried every thing not work
[19:38:35] Please solution for this
[19:33:01] WWW.ANONYSHU.COM
[18:56:25] I don\'t see Kenya here at this link
[18:53:46] I want to renew so that i can access this new updates
[18:53:04] I can pay via PayPal
[18:51:03] Am in kenya
[18:32:30] Cm2 years is how much
[17:07:53] Ta-1114 password remove help!
[15:28:49] I unlock modem
[15:25:15] House please help me itel W6501 ask for Fdl I. Used the file as Fdl same failed
[15:22:05] Hii
[15:17:52] Does anyone unlock mifi here
[15:13:14] Help unlock 9032z alcatel
[15:12:05] 👍
[15:11:37] 💪🏿
[15:11:30] LG k410 frp remove
[15:10:09] Quiem me ayuda a liberar una tablet alcatel 9032z
[15:09:04] Help unlock 9032z pliz pliz
[14:26:47] Another A/B device, all functional works smoothly

https://forum.gsmhosting.com/vbb/f296/mt-6739-konrow_sweet5_v1-20210803-identify-nv-backup-read-write-flash-unlock-bl-2996311/
[13:18:50] Hello everyone ✋
[13:18:37] Hello my brother any solution of Nokia ta 1380 network unlock please
[13:08:32] https://www.cfirmware.com/index.php?a=downloads&b=file&id=2159

need
[12:22:11] 👍
[11:53:53] Can\'t find itel p37 (p651w) firmware on ios support files
[10:16:11] Itel pw651w frp any solution?
[10:05:42] 12345678
[09:14:16] Check your keypad
[09:13:16] congratulations to our groop we have reached 1k 1000 members 👏👏👏
[09:02:00] 12345678
[08:59:06] 123456789
Not working
[08:58:54] Unable to extract 2.30 from zip need password
[08:47:06] How to know if my cm2 is expired
[08:31:36] Add boot package from support
[08:30:20] Hello sir any solution of network unlock Nokia Ta 1380
[07:39:48] send teamviwer i can help
[07:33:12] am using cm2mtk v2.30 i see oppo reame xiomi
[07:19:02] Go to tecno and choose mixed
[07:17:48] Card found : 34EC1EC9 , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.30

Load IDBase v1121431 Ok!

UserName and/or Password not set! Can\'t continue!

Load IDBase v1121431 Ok!

Operation : Identify [ v2.30 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
MODE : PRELOADER PORT
PORT : 8
Waiting BOOT ack ...
PRELOADER
[07:17:42] trying to remove frp infinix x657b i get this error pliz help
[07:04:54] Ok
[07:04:15] I will try without any key
[07:03:12] But it\'s not contact on spd2 setup
[07:03:02] Come inbox I will try
[07:02:44] 7731e
[07:02:18] ?
[07:02:17] Phone CPU
[06:53:02] Hello morning everyone please anyone can help me to unlock network of Nokia c1 second generation I try it but phone doesn’t take the boot
[05:47:21] Reconnect mobile press vl+ vl- together it less 12 seconds meta done tested by me
[05:09:30] Operation : Reset Settings/Format FS [ v2.30 ]

Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM54)
MODE : PRELOADER PORT
PORT : 54
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META enter failed by timeout!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect
[05:05:01] How to remove pattern lock of oppo A83 (coh1729) using meta mode ?
[04:53:10] You\'re using VPN?
[04:17:04] anyone solve this?
[04:16:04] FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
Server Error : Access denied: {\"Message\":\"Access denied 006B7641F1 auth\"}
>>> ERROR : Server process failed!
>>> ERROR : FLASH FDL AUTHENTIFICATION FAILED!

>>> Error : Fail to boot FDL!
>>> Check previous message for more info!

Reconnect Power/Cable!
[02:29:20] This phone is android 6 always use hands to remove frp.
[02:10:14] Hi team 🙌 please update for SPD I try 6 itel mobile fall not connected fix thnx u for update fast always God bless you

InfinityBoxTalks 2021-11-29

[22:56:48] Hi all
Why we cant boot samsung G532f in cm2 ? I want remove frp
[22:36:14] Thanks
[22:35:56] if active, will the other intinity best 2 not be violated?
[22:34:26] this free ?
[22:21:11] Boot loop
[22:20:44] I have an infinti best dongle
This infinity chinese miracle supports tool?
[20:52:08] Something like this happened to me sometime ago on one of the new version. I found out that it was drivers issue. Please double check your driver and uninstall unwanted driver
[20:29:11] help me!


Card found : B2AE204D , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.30

Load IDBase v1121431 Ok!


Operation : Read Firmware [ v2.30 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Устройство с последовательным интерфейсом USB (COM23)
MODE : PRELOADER PORT
PORT : 23
Waiting BOOT ack
[20:22:51] Card found : XXXXXXXX , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.30

Load IDBase v1121431 Ok!


Operation : Read Firmware [ v2.30 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Устройство с последовательным интерфейсом USB (COM23)
MODE : PRELOADER PORT
PORT : 23
Waiting BOOT ack ...
PRELOA
[20:18:39] Card found : XXXXXXXX , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.30

Load IDBase v1121431 Ok!


Operation : Read Firmware [ v2.30 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Устройство с последовательным интерфейсом USB (COM23)
MODE : PRELOADER PORT
PORT : 23
Waiting BOOT ack ...
PRELOA
[20:18:39] Card found : XXXXXXXX , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.30

Load IDBase v1121431 Ok!


Operation : Read Firmware [ v2.30 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Устройство с последовательным интерфейсом USB (COM23)
MODE : PRELOADER PORT
PORT : 23
Waiting BOOT ack ...
PRELOA
[20:18:38] Card found : XXXXXXXX , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.30

Load IDBase v1121431 Ok!


Operation : Read Firmware [ v2.30 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Устройство с последовательным интерфейсом USB (COM23)
MODE : PRELOADER PORT
PORT : 23
Waiting BOOT ack ...
PRELOA
[20:18:35] Card found : XXXXXXXX , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.30

Load IDBase v1121431 Ok!


Operation : Read Firmware [ v2.30 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Устройство с последовательным интерфейсом USB (COM23)
MODE : PRELOADER PORT
PORT : 23
Waiting BOOT ack ...
PRELOA
[19:52:12] Dear Infinity Team,

My CM2 Dongle Suddenly Showing This Error:
CM2 Smart-Card misconfiguration! Contact to support!

I have tried to Update Dongle Firmware But Fail. Please Solve my Problem as early as possible. I will be grateful to Infinity Team.

Thanks in Advance.
[18:11:28] hello
[17:46:43] oale x5 firmware need
[16:52:31] How to remove frp infinity x657b with cm2mtk v2.30.
[16:00:51] Still the same my brother
[15:59:22] 👍
[15:51:46] It’s not me that send email
[15:51:27] No
[15:41:57] Please check for me this S/N 0037BD2301
[15:41:33] This is not my sn
[15:37:31] B6352BCC
[15:36:56] Infinity box
[15:36:46] My dongle have 2 years support
[15:36:34] Bro I can not use cm2mt2
[15:35:43] I will find last email that I have send it
[15:35:26] That dongle can not update it
[15:35:02] It’s the second time that have problem in this dongle
[15:33:13] No bro
[15:31:59] Soft say that support expired
[15:31:45] Now
[15:31:41] Bro I have support with 2 years
[15:26:41] Can not update it only
[15:26:32] Dongle is ok
[15:22:20] My brother I checked so many times Nokia c1 second edition but is giving problem on contacting
[15:20:44] Hwid: 00032BCC00001942
[15:20:17] Hwid: 00032BCC00001942
[15:18:55] Yes my brother respect first
[15:11:49] ICLOUD OPEN MENU
[14:59:54] Please someone should help me with this firmware
[14:59:41] https://support.halabtech.com/index.php?a=downloads&b=folder&id=69619
[14:39:16] Sir redmi note 10s redmi 9a 9c and other model rep done but not successful
[14:10:42] Pix
[14:04:15] Itel s17 help frp
[14:04:09] Need help pls
[13:59:33] Card returned error :6E00 at 0/117
[13:59:09] Finalizing check error :
[13:58:50] Bad returned error :6E00 at 0/117
[13:58:15] Checking dongle identification …
[13:45:38] Tecno BB2 display lines after flash is there any display fix file?
[13:45:00] Tcl
[13:44:50] Imei
[13:44:47] Trying to fix d umei
[13:40:06] Tecno ke7j firmware needed
[13:33:48] Help unlock alcatel 9032z?
[13:28:10] Connect with right loader and in flash mode, if device hanged out, keep pressing boot button
[13:21:37] No response
[13:08:20] Wait for update
[13:08:14] Diag level disabled
[12:35:31] 🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺
[12:19:18] Pls help itel s661w frp
[12:18:49] pls answer me!
[12:18:46] Frp
[12:18:18] S661w help
[12:07:57] old settings how?
[12:07:44] i dont understand
[12:03:25] For cm2
[12:03:16] Remove old settings
[12:00:48] admin pls help me asap
[11:58:20] after installing mt2 v2.30 my cm2 does not open
[09:23:50] Nokia 1.4 hard reset solution
[09:23:17] Nokia 1.4 hard reset solution
[08:55:38] We still hope for Qualicom update
[08:54:39] Samsung a6+ clone how can remove password via memory tool?
[08:47:13] Good job, think so
[08:33:02] Volume key ryt
[08:31:50] Thanks boss fast reply
[08:30:55] Sir please add Vivo mi and other ime rep add
[08:25:55] ✅Done
[08:17:24] Check vol keys
Change file
[08:04:09] After Flash Set Auto Goes Fadtboot Mode
[07:57:53] flash done but still dead
[07:57:47] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 402C62A2DEC8496E9D6E6B88F6CEBD56
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BR
[06:39:18] if u have latest ver link plz send
[06:39:03] Ok sir
[06:38:07] flashing error
[06:38:07] PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 402C62A2DEC8496E9D6E6B88F6CEBD56
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 65DA3F7214283086DB568A9FFF68FF6ECEB9700FF913A35AE98B30B7B266E71A
BROM : SLA : Local Auth
BRO
[06:38:07] Created by Infinity-Box (c) 2021
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt

Product Brand : Redmi
Product Device : angelican
Product Model : M2006C3MNG
Product Name : angelican_eea
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-01-01
Build Time : 24.01.2021
Product Info : angelican
Product Manfct : Xiaomi
Product Board : angelican
Board Platform : mt6765

Preloader [HW DEV]
[06:35:12] Now Show Only Mtkport
[06:33:52] Redmi 9C Dead Someone After Flash UserData EMPTY
[06:33:26] In box
[06:33:23] Operation : Identify [ v2.30 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 402C62A2DEC8496E9D6E6B88F6CEBD56
BROM : SecLevel : 0x000000
[06:21:52] I paid 2 years licence y i can\'t access thiss new updates
[02:39:46] I check my times only this phone is not contact properly
[02:12:17] The phones phone not connected properly ....
[00:46:04] Ok thanks
[00:22:11] How can I Renew it?

InfinityBoxTalks 2021-11-28

[23:46:38] 27179a2a
[21:19:57] Hello sir, pls help out, I have infinix best dongle with 100 credit on it, but I don\'t know how to check the credit
[20:55:29] Uninstall and install again
[20:54:50] After flashing it with new file after some day or week it come to say easy notification on screen
[20:52:21] redmi 9c anti relock
[20:50:30] Format safe data is great add... Wonderful. I hope it works for Android 8 to 11
[20:33:44] Please I need solo aspire 4 scatter file not SD card file
[20:18:11] Alcatel
[20:18:09] Help unlock 9032z
[20:17:59] Done successfully
[20:17:35] ✔
[20:17:16] Help unlock 9032z?
[19:42:41] Can u explain d process pls
[19:42:27] How boss
[18:44:49] whane i try to update it always error card return error 6E00 at 0/117
[18:34:31] uninstall it
[18:25:04] 🙄
[18:25:03] 🤷🏾‍♂🤷🏾‍♂
[18:25:00] Anybody Pls tecno BDP2 EASY BUY it kip on coming after removing
[18:17:20] Nokia c1 second generation network unlock please....🙏
[16:39:02] If there is any way to help me help because not single is many phones
[16:32:10] These problem start after I updating my cm2 from version 2.28 to 2.29-2.30 other module like Spd2,Scr and other are okey
[16:28:13] Is AUC issue???. I went to the YouTube I saw how to solve AUC issue I done that is given the same problem
[16:24:36] I also use cm2 version 2.28 the same
[16:23:30] I format and install window 7 32bit the same problem
[15:36:12] Yes but what is the use ? When this func6is used ?
[15:15:41] spd tool No need to select any model. unlock add plz
[14:51:03] Can u explain what is the use of rpmb read , write function?
[14:48:31] Hi i need NVRAM for begonia china
[14:30:27] pls solve my problem
[14:30:21] whane i try to update it always error card return error 6E00 at 0/117
[14:29:34] i have a problem in my infinity box
[14:29:23] hello bro
[14:06:59] Great work continue, but please try to update Qualcomm...
[13:35:16] good request....also i need rpmb read write...
[13:29:55] Good update team please add Read write format Rpmb
[13:27:56] I mean how to uninstall apps on phone
[13:27:36] Please any solution for easy buy phone
[12:17:31] I think i av same issue wit dis phone as well I return it to own yeah cant read it i remembere den it wit v2.28
[12:06:26] Option is auto enabled for supported firefly Soc. On top of software window click on Platform and then select - Infinity Firefly Smartphone option.
[11:51:07] cm2 mtk 2.30 not opening .... after disable eset internet security ther open ...... so plesase team Fix this
[11:35:47] Ok sir
[11:24:00] Dm
[11:21:47] Oppo a15
[11:19:47] I,m try many phones the same error like Tecno KA7,LB6 and infinfix x688B
[11:02:24] All Mobile Hardware Tools Best Price

Chek Letest Price👉 https://wa.me/c/918218799540
[11:02:04] Just powers on
[11:01:58] The phone does not respond even in diag mode
[11:00:07] nokia TA 1387. SPD 9863A password remove, is cm2sp2 supporting
[10:46:17] Why hidden Bootloader unlock option?
[10:37:02] Send log to cm2 i dnt think it will ready it
[10:34:08] can i flash TA-1188 nokia 2.2 with best...
[10:28:02] I,m not install any antivirus on my system I,m try to read infinfix x688B
[10:26:19] Help me me ...preloader off
[10:06:40] i will try to do and get a clue atleast will share with u guys
[10:06:18] Most of the CPU I was using to remove frp us showing error after updating
[10:05:48] obviously sir
it must be something like that how do they do i dont really know
[10:04:38] Hello I have an infinti best dongle
This infinity chinese miracle supports tool?
[10:01:21] it really amazed me cuz cpu is not concerned for that tool any cpu any model just in couple if minutes done! but legally unlocking costs arm and a leg
[09:59:29] So do i boss
[09:56:12] Is giving me many issues
[09:53:32] tanx🙏🙏🙏🙏
[09:45:24] They register even iPhones too
[09:44:01] samsung devices specially
[09:43:58] Hello!
How do I get cm2 in ghana?
[09:43:17] Mobile phones here should be registered within 3 months otherwise it wout connect to network unless u register it but its really costly , some mobile repare shops are like registering it without changing imei number until u reset the phone it works
[09:42:44] Infinity Chinese Miracle-2 CM2MT2 v2.30 - More models & Features

https://infinity-box.com/support/?r=100165
[09:04:02] model
[09:01:13] Hello Anyone knows how to register phone on Turkey network?
[08:57:17] ok thank u very much and sory for any inconvinience...i was only following your instructions that was given and my delay was due to power default there was no any means,,,and i can not lie ..bse lying is not my nature...i appriciate your effort on he latest update..thats all
[08:33:50] All fixed. Thank you
[08:24:15] May be your are not installed neccessary tool
[08:20:25] I can\'t work with my cm2 mt2 because of it
[08:19:21] 00328A1C7C
[08:17:05] Pls i need help, My cm2 ios keeps telling me IP HAS BEEN CHANGED. pls how can i fix this ?
[06:21:00] how to update firmware version: 0151
[06:20:02] Check for updates...
Scan C:\\InfinityBox\\tools\\..\\CM2MT2\\
Installed CM2MT2 version: 2.30
Latest CM2MT2 version: 2.30
Required firmware version: 0151
No updates found
[05:43:00] Realme C21 RMX3201
[04:00:22] How to fix ?
[04:00:18] Cm2 v2.30 not opening
[02:52:16] Post back code

InfinityBoxTalks 2021-11-27

[21:33:24] I have oale cc6 pro
Not found on google
[21:31:32] This flash Mtk
I need spd
[21:22:56] ?
[21:22:52] Pleas answer me
Error:faild to open port.

What i have to do
[21:21:19] Qualcom update pleaseeeeeeeeee
[21:01:59] Ver 2.30
[21:01:45] This problem with new program
[20:59:35] Help unlock zte 9032z?
[20:52:09] Please does cm2 has any support for HiSilicon Kirin device?
[20:49:52] Not found
[20:32:43] PTFN : MediaTek PreLoader USB VCOM (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
AGENT : TECNO : SEC_MIXED | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT
[20:32:43] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
AGENT
[20:27:05] Any one have oale cc1 pro spd?
[20:24:00] Thank you
I\'ll try it now
[20:23:24] Since 5 years
But with dongle
Since 5 days😅
[19:53:53] Anyone have realmee c21 rmx3201 cm2 read file?
[19:49:44] I was creating a IOS support account then i put my own personal password with the user NAME that i read from dongle. whilst i was creating i so where you said you sould put factory PASSWORD when creating is there a big problem?
i change my personal password to factory??
[19:44:51] Help unlock 9032z
[19:44:03] i change my personal password to factory
[19:41:42] I was creating a IOS support account then i put my own personal password with the user NAME that i read from dongle. whilst i was creating i so where you said you sould put factory PASSWORD when creating is there a big problem?
[19:20:39] And this is the problem with all
[19:20:05] I try whit more than 5 phone
[18:56:09] It,s give this message
[18:55:51] Cm2 dongle
Not working🤷‍♂️
[18:55:26] Repair imei for infinix smart 5
[18:07:47] ok
[18:05:19] I fixed by unstal some usb drivers filter
[18:03:06] change window to win 10 64bit.i experience some problem with win 11.
[17:50:43] if this is the case i can install nwe window bse my tool has both nokia best+cm2 and is the only my basement...i hane done nothing from the day before yesterday
[17:47:25] my own pc
[17:46:01] the file eltima not available sir
[17:01:45] Is there any way I can remove kg lock on Samsung A12 with cm2
[16:44:14] i have replied sir..the urgue was to submit my fafault bin
[16:34:55] I mean pay for the firmware?
[16:34:22] That\'s good👍👍
[16:28:57] I think some thing they forgot is to enter it in module settings
[16:28:08] Right
[16:27:50] 👍
[15:57:42] If you haven\'t an account, you need to create it and then you fill its login details in your cmt2sp2 module settings.
[15:53:37] No, the iOS logins is the user name and password you used when registered on infinity cm2 website not for your dongle.
[15:49:00] yes I\'m connected to the Internet. IOS the one I read with dongle manager?
[15:46:24] You need to use your IOS user name and password. Go to settings and fill your online login details remember your PC must connected with internet during frp remove
[15:42:51] how can I get a working user NAME & PASSWORD ID I have a itel p36 which needs online arth want to remove FRP
I tried the one I read with dongle manager it gives me this error



Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel W6501
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PAR
[15:40:09] Did you solved you issue?
[14:54:16] I tried the one I read with dongle manager it gives me this error



Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel W6501
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0001
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Pr
[14:46:44] how can I get a USER NAME & PASSWORD I have a item p36 which needs online arth
[14:30:09] sor for delay we havepower fault this week...my card...S/N...03E6B39E6A
[13:43:38] PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT0000 , SBID : 0x0000 , HWVR : 0x0000 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 724253CA423E561D74A96E097C701827
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : EMI : Search
BROM : EMI : Not found
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGEN
[13:43:01] Still on Tecno T402.I make a jumper From TX to GND as shown here but cm2 can\'t read the full info.
[13:28:46] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : L6502
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True
[13:28:44] thanks sir now done
[13:27:33] OPPO A15
[13:24:15] its paid service
[13:23:00] which used user and pass here
[13:21:01] i try to identify itel a571L but showing error
[13:20:23] Card found : 019F8169 , v0151
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : L6502
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed :
[13:20:20] hi to all
[12:44:24] What is the configuration or settings to format OPPO mtk , please , I need to know what shall I choose as steps before to connect OPPO mobile , thx in advance
[12:24:51] So what\'s the connection with my issue?
[12:17:59] Hi can I reset ta1021 frp with best dongle?
[12:09:47] Mt2 v. 2.30
[11:37:46] https://www.infinity-box.com/news/
[11:35:46] Spd
[11:35:41] Tecno bd2p easybuy possible?
[11:17:31] Phone start in fastboot mode..... help
[11:16:35] [FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000001688000
Erase : 0x0000000003688000 : 0x000000000769A000
Erase : 0x000000000C000000 : 0x0000000000800000
Erase : 0x000000000F800000 : 0x0000000000200000
Erase : 0x000000000FD00000 : 0x0000000000080000
Erase : 0x0000000013D80000 : 0x0000000008280000
Erase : 0x000000001E000000 : 0x0000000004D00000
Erase : 0x0000000024500000 : 0x0000000017800000
Erase : 0x0000000040800000 : 0x0000000240000000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing
[11:16:35] Card found : 215A16C4 , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.29

Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Preloader [HW DEV] Info :
EMI : DEV : MT6765
EMI : SRC : preloader_t99652aa1.bin
EMI : CNT : 0004
EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [02] : DRAM : LP_DDR4X : ID :
[10:09:57] Hello Team
I need Nokia G10 (ta-1334) firmware file
[10:02:35] Good morning, do you have a digital license or in which box can I activate infinity? Thanks
[09:27:33] Do I need to pay?
[09:27:13] How to download these firmware
[09:25:01] let you plz frame auto fixing this problem boss
[09:24:24] card misconfiguration has become a barrier to my work
[09:23:39] team as per your instructions given yesterday till now am in dilema w/o working my problem still persist...i sent fix request and the reply was to wait until now
[09:23:30] haloo team...help me if pocbo
[09:20:35] The base is 9832
[09:20:30] Any help any idea
[09:20:19] Neon ray pro work without any fdl via diag
[09:19:44] Look my video boss
[09:11:49] team as per your instructions given yesterday till now am in dilema w/o working my problem still persist...i sent fix request and the reply was to wait until now
[09:08:50] Let me try
[09:07:56] Oky
[09:06:14] Help
[09:06:08] Serial number 75827684
[09:05:57] 75827684
[09:05:31] Misconfigaration
[09:05:19] Can I I help to fix
[09:04:02] Which
[09:03:55] Problem
[08:24:16] Pleas i need help why this problem is happening
[07:12:47] Admin help me neon day pro fdl
[06:53:23] Open : W6502-F3108-10.0-OP-V028-20210304_1620_user.pac
VER : BP_R1.0.0
LEN : 2,68 GiB
CPU : sp7731e_1h10
VER : W6502-F3108-10.0-OP-V028-20210304_1620-user

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : W6502
Product Model : itel W6502
Product Name : W6502
Patch Level : QP1A.190711.020
Display ID : W6502-F3108-10.0-OP-V028-20210304
Ver. Incmt : OP-V028-20210304
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-03-05
Build Time : 04.03.2021

[06:49:18] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V028-20210304_1620_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL :
[06:45:26] Itel w6502
[06:45:10] I do it but
[06:43:14] Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V028-20210304_1620_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
Server Error :
>>> ERROR : Server
[06:37:10] We need such updates. Even the LG and Qualcomm modules should be updated
[06:36:23] Okay bro. Thanks
[06:36:10] Unless we should be inboxing ourselves for such questions.... give some light please
[06:35:39] But he asked for what infinity can\'t do
[06:34:41] Use Unlock tool or Chimera
[06:34:00] Okay boss. Let me scan
[06:12:27] Any black Friday or promo for the cm2 box activation
[05:54:19] but it wont open svc or flash mode
[04:59:21] what about ta 1312

InfinityBoxTalks 2021-11-26

[23:06:13] Hello time kg lock on Samsung mtk a125f and a225f complete
[22:15:17] Please I need solo aspire 4 scatter file
[21:25:20] Maybe b u will see option to dat
[21:25:07] Go to dere forum
[21:24:16] 😮
[21:23:28] I havnt check dat option yet
[21:23:04] Ok
[21:22:58] Am asking for easy buy for android 11
[21:22:23] What about 10 and 9
[21:22:20] Nope
[21:22:07] Only android 11 ok oo
[21:21:53] No oo
[21:21:44] Av u try it
[21:21:38] Yes
[21:21:33] Android 11
[21:14:20] This resetextra without removing userdata ,is like removing only code right
[21:11:08] Android who av parmanent solution for dat i av one wit me
[21:07:46] cpu 7731e
[20:59:11] hi guys.Is nokia c1 TA1130 network lock supported by cm2 spd yet
[20:59:10] Done u sabi work
[20:35:11] Wait
[20:34:38] Serious ok
[20:33:52] But it will still remain in frp
[20:33:26] Ok
[20:33:24] Frp pk
[20:33:20] It will say
[20:29:13] About Samgung test Point
[20:28:55] What
[20:25:07] Hi any one with permanent solution for easy buy phone paid or free
[19:49:05] Nice update team for 2.30
[19:32:41] What causes that TJpropmain?
[19:06:50] OK thanks you
[19:00:10] Good update. Infinity made general cpu update that why i loved this tool
We want also function update infinity have poor function update such as rpmb, boot1, boot2, for ufs lun1, lun2… areas
[17:19:36] Hmm. Stuff been working since before the update bro
[17:15:55] Create a new folder in c/programfiles and rename it to infinity.then install infinity into that folder.
[16:46:34] admin pls help!!
[16:36:01] waiting for BEST update 😊😊
[16:34:52] ok
[16:28:06] Anybody
[16:28:02] Wat should pic wen i want read d firmware camon 12 pro
[16:26:24] it still didnt work
[16:24:51] Tecno camon 12 pro cc9
[16:24:17] But it identify it normal
[16:24:07] I try it with 2.30 like 5 tyms not reading
[16:23:34] Can i read tecno cc9 with cm2
[16:13:55] Yes! not opening
[16:09:30] CM2 version 2.30 not opening in my PC
Please any solution
[15:40:24] Can easybuy app be remove totally?
[14:50:56] Nokia 1383
[14:50:02] Operation : Identify [ v2.13 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable
[14:47:06] 🤩👍👍👍
[14:33:12] Infinix x657b
[14:31:11] Not found
[14:05:26] Rm 954
[14:04:11] Nokia 207
[14:02:51] Admin help me sort this problem
[13:49:10] Samsung a03s (a037f) bootloader unlock possible?
[13:18:59] what is the cause x657b
[13:18:41] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 1859EFAFD36D7DBFB3338947754F6547
BROM : SecLevel : 0x0
[13:03:30] Am downloading d new versions
[13:03:10] Gooood
[13:02:14] 👍👍
[12:34:56] Whenever I try to remove frp, flashing
[12:31:42] What the diffrences between 2.29d to 2.30 in support
[12:31:24] https://dl2.infinity-box.com/00/pub.php?dir=/software/&uid=18958&file=InfinityBox_install_CM2MT2_v2.30.7z
[12:28:41] .


,,,
[12:14:06] Zuri s56
[12:01:50] Phone model
[12:00:47] Privacy
[11:57:32] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable
[11:54:00] Cm2mt2 2.29 not open have bug., cm2mt2 2.28 work fine.
[11:47:15] If you remove flexihub before connecting dongle you can fix .
But if you connected arleady dongle , no way you must renew windows.
[11:42:53] Or any version
[11:38:08] let me try
[11:38:03] ok
[11:37:06] Renew windows or change pc if you install flexihub you will not use infinity again. If you want to use cm2 you must renew windows or change pc
[11:36:31] 10 boss
[11:34:52] uninstalled it yesterday sir
[11:27:28] Someone with zuri s56 firmware to sell it to me??
[11:22:50] Not open exe
[11:22:14] Infinity logo then off
[11:18:25] Watsap number
[11:17:48] Wit cm2
[11:17:42] Okk
[11:10:15] Noo after 3 days
[11:08:36] Relock after unlock
[11:08:22] Buy
[11:08:21] Easy but
[11:08:13] TECNO CE7j
[11:06:28] Any solution
[11:05:34] Okay thank you
[11:05:05] Gm
[11:02:59] 55$
[11:02:13] not finding this files sir
[10:57:43] Cm2mt2 V2. 30 is New update
[10:56:37] Hello
Activation
Dongle cm2
2 year
How much ..?
😇😇
[10:55:19] delete this??
[10:53:53] If I choose boot base --> X_FireFly

it says

warning! Model list empty! Select another based model!
Help?
[10:53:03] sorry sir
[10:52:53] didnt understand
[10:49:11] Card version should be v0151
[10:47:59] Already Up-to-date
[10:47:59] Open the phone and make jumper from TX to any ground
[10:47:42] Update dongle firmware.
[10:47:20] Update card etc.....try bit not open exe
[10:47:02] Cm2 2.30 ver use but not open cm2
[10:46:55] SPD, MTK,RDA support
[10:46:38] update done but still not openning
[10:45:43] Pls how do I get the short TX and Ground?
[10:43:54] If I choose X_FireFly it says

warning! Model list empty! Select another based model!
Help?
[10:43:41] Any key
[10:43:37] No need to hold
[10:43:30] Yes short TX and ground is boot key
[10:42:06] 4377269F
[10:40:38] Scan c:\\users\
uras tech service\\downloads\\compressed\\donglemanager for report.log
==> Scan c:\\InfinityBox for report.log
==> Scan c:\\Program Files for report.log
==> Scan c:\\Program Files (x86) for report.log
Found files: 0
==> Scan c:\\users\
uras tech service\\downloads\\compressed\\donglemanager for *.ibin.log
==> Scan c:\\InfinityBox for *.ibin.log
==> Scan c:\\Program Files for *.ibin.log
==> Scan c:\\Program Files (x86) for *.ibin.log
Found files: 0
==> Scan c:\\users\
uras tech service\\downloads\\compressed\\
[10:37:43] Short TX and group
[10:37:10] Pls the boot key(s)
[10:35:03] Check in manager dongle and see if is mtk or spd
[10:33:08] Pls is cm2 support Tecno T402 button phone?
And what\'s the boot key?
[10:32:48] Wait i will send yoy a pic
[10:31:32] Plz how To remove flyme account for Meizu m1 metal
[10:19:19] great update team
[10:11:27] did not result sir
[10:02:07] === DongleManager [Infinity] v1.88 [11/26/2021 3:31:35 PM] ===
Searching...
Card-Reader: Generic EMV Smartcard Reader 0
HWID: 000019FC200A4082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): 1FEA19FC
Firmware version: 0150.02
=== Started: 11/26/2021 3:31:37 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication stage error:
Server answ
[09:47:54] ok let me stop there...how can i follow instruction before any direction..i have already given up sir sory for any inconvinience for any case.
[09:46:11] Infinity Chinese Miracle-2 CM2MT2 v2.29 - MT6781, A/B Reader and more

https://infinity-box.com/support/?r=100164
[09:45:42] Sq a
[09:45:10] this is my report how am i violated?
[09:27:00] when i try to open..it fails displaying misconfiguration when i try to update it says data damaged
[09:26:07] my problem cant be solved means i have to put into my pocket
[09:23:56] Done thanks
[09:23:01] hello team you arethe one to help this problem
[09:20:59] Hello, please update the boot of the new Nokia spd series phones. For Nokia ta-1380 android 11
[09:19:14] help this
[09:19:08] cant update
[09:18:07] hello team i reported my concern ..my data card demaged how to solve
[09:08:38] Ok
[09:07:56] Check it also in registry
[09:06:27] Cos no such on my pc
[09:06:21] OK let check again
[09:05:24] Dis
[09:05:04] It clean
[09:05:00] Cos i can\'t find anysharing tools on my laptop
[09:04:24] Or should delete dat as well
[09:04:00] Is d cm2mtk2 2.30.fix
[09:03:39] How do i get dere......
[08:59:35] Okay
[08:48:42] Thank you for this update let me download again after 2.29
[08:38:14] What about safe format? Data loss no more??
[08:31:30] What\'s new in this cm2mt2 v.2.30 or which bugs was fixed?
[08:27:22] https://dl1.infinity-box.com/00/pub.php?dir=/software/&uid=18957&file=InfinityBox_install_CM2MT2_v2.30.7z
[08:25:16] Help v2. 30,dongle manager not open
[08:21:55] Yes 2.30 upload in server
[08:19:15] Mtk2 2.30 is out?
[08:00:14] ok sir
[07:55:38] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.29

Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.29 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM15)
MODE : BOOTROM
PORT : 15
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
[07:54:43] i also face this problem but w8 for team response ....
[07:09:08] Nothing happened
[07:09:03] 🤷🏾‍♂🤷🏾‍♂🤷🏾‍♂🤷🏾‍♂
[07:09:00] Try everything
[07:08:52] I try wit internet
[07:07:59] House how can fix dis
[06:43:38] Niliwahi kukupa solution ulisahau
[06:42:46] smart-card misconfiration problem help
[06:41:21] A/B????
[06:32:24] Hallo team my cm2 misconfigurate
[05:37:01] Cm2 not support Qualcomm phones. If you want working on this cpu go to other tools.
[05:07:20] Please how do I remove demo on infinix hot 10i spd android 11
[03:49:41] lie ,,, for several years

InfinityBoxTalks 2021-11-25

[23:47:25] please team add imei repair at qualcomm chip plzzzz
[23:29:58] Kindly, ADD KG lock on CM2MTK
[21:57:37] 🙏🙏🙏🙏🙏
[21:57:27] 👌👌👌👌👌👌
[19:48:23] Still needed Solutions pls
[18:42:05] 👍
[17:32:31] I needed help
[17:31:27] Très bien merci
[17:30:07] Pls
[17:30:06] Pls I needed help on this 0ls
[16:27:23] clone iphone 12 pro max imei repair plz
[16:00:03] which file broo
[15:58:39] small file isavailable
[15:58:29] What is the problem?
[15:49:51] infinix x623 fix half icon tool plz
[15:44:12] Tecno kg6 da files
[15:37:02] Alcatel 5099 i need to remove frp
[15:36:13] Operation : Identify [ v2.29 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 0E9492E91F2CAC8E22F96803DA6C1B58
BROM : SecLevel : 0x00000007
BROM : SecMode
[15:32:38] What can be the problem ?
[15:28:47]  Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.201005.001 V1.180_B01 release-keys
Platform Version: MOCORTM_20A_W21.13.5_Debug
Project Version:   sharkl3_pub
BASE  Version:    4G_MODEM_20A_W21.13.5
HW Version:        sc9863A_modem
CMP_Time : 04-02-2021 02:50:31

MODEM TAG : MOCORTM_20A_W21.13.5_Debug_4G_MODEM_20A_W21.13.5_sc9863A_modem_sharkl3_pub

NVMng  : SecurityInfo
I
[15:20:15] Set model redmi 9a
[15:19:49] Bro
[15:19:47] Imie null
[15:16:35] On diag mode ?
[15:15:31] Does Cm2 support TA-1352 network unlock?
[15:14:10] TA-1352 network lock available
[15:13:08] Division errors boss please solved it
[15:12:30] Operation : Memory Tool Init [ v2.29 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM46)
MODE : BOOTROM
PORT : 46
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : E28CEC2F654004F35B5E3021F0A19837
BROM : SecLevel : 0x0000
[15:02:34] Repair security oppo cph2239 please this support versión 2.29
[14:29:09] I need to Alcatel 5099a da fil
[14:26:09] how i should proceed then
[14:23:51] Mobile is redmi 9a
[14:23:42] 👍👍👍👍
[14:23:18] ?
[14:23:16] What is this prov
[14:12:59] Mode : FULL FACTORY ( WIPE + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 0E9492E91F2CAC8E22F96803DA6C1B58
BROM : SecLevel : 0x00000007
BROM : SecMode : SBC+SLA
[14:12:54] ok use cm2
[14:10:31] Mtk 6735
[14:10:29] 👍👍👍
[14:07:08] chip
[14:05:22] Hello Alcatel 5099a frp please
[14:03:50] It just shows the infinity log and it disappears?
[14:02:21] No
[13:56:56] my frends u can use the old ones whle waiting fixing from owner...
[13:55:58] MT2.29
[13:55:33] Not opening
[13:54:05] Searching...
Username: 00A3550E11
==> Scan c:\\InfinityBox for report.log
==> Scan c:\\Program Files for report.log
==> Scan c:\\Program Files (x86) for report.log
Found files: 0
==> Scan c:\\InfinityBox for *.ibin.log
==> Scan c:\\Program Files for *.ibin.log
==> Scan c:\\Program Files (x86) for *.ibin.log
Found files: 0
==> Scan c:\\InfinityBox for fault.bin
==> Scan c:\\Program Files for fault.bin
==> Scan c:\\Program Files (x86) for fault.bin
Found files: 0
No reports found
[13:35:15] 👍👍👍👍
[13:30:43] Realme c21u
[13:30:25] !
[13:29:05] after user new setup all model stuck this process..
[13:28:34] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.29

Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.29 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM15)
MODE : BOOTROM
PORT : 15
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
[13:24:50] 👍👍
[13:23:02] We just need Qualcomm module update
[13:21:07] Not opening still
[13:20:37] Searching...
Username: 00A3550E11
==> Scan c:\\InfinityBox for report.log
==> Scan c:\\Program Files for report.log
==> Scan c:\\Program Files (x86) for report.log
Found files: 0
==> Scan c:\\InfinityBox for *.ibin.log
==> Scan c:\\Program Files for *.ibin.log
==> Scan c:\\Program Files (x86) for *.ibin.log
Found files: 0
==> Scan c:\\InfinityBox for fault.bin
==> Scan c:\\Program Files for fault.bin
==> Scan c:\\Program Files (x86) for fault.bin
Found files: 0
No reports found
[13:19:01] Yes, same thing happened to me.but is working just fine now
[13:17:22] Hardreset
[13:16:36] Samsung m01 cor frp cm2 Done Moble hang on logo cm2 team plz fixed
[12:57:50] Imei gone after flashing
[12:55:41] After flashing imei gone
[12:50:57] What is this problem
[12:46:19] exynos
[12:46:16] Those complaining that cm2 2.29 is not opening should update their dongle firmware, this update is great as I was able to read flash android 11.
[12:46:00] chip type
[12:44:17] 😁
[12:41:53] Or use mtk engineering apk and repair imei by hands
[12:41:11] Ok
[12:40:31] Yes imei repair bro
[12:38:43] needs network unlock broo
[12:35:51] Infinity Chinese Miracle-2 CM2MT2 v2.29 - MT6781, A/B Reader and more

https://infinity-box.com/support/?r=100164
[12:35:49] Sigma
[12:09:25] P651w nvram file
[12:09:01] Itel p37 nvram file
[12:07:42] Itel p651w p37 nvram file
[12:07:09] Help help p37 nvram file please
[11:49:11] Thank you very much boss
[11:35:19] Thank you boss
My problem solved after deleting all this 👍👍👍
[11:32:17] What tool can you write with? who can help
[11:31:51] engineering code is not valid
[11:31:26] Hello this infintiy best dongle How to write Chinese iphone 12 pro max imei?
[11:18:12] What’s happening
[11:15:55] What’s happening
[11:12:21] 3g5di7rd
[11:11:16] I’ve sent the teamviewer
[11:06:05] 512 822 978
[11:03:41] How do I remove the flexihub driver completely from my pc
[10:43:34] 👍
[10:43:34] nice to hear that bro
[10:40:30] Enjoy bro
[10:39:21] @Abdallahsharif @Nzelemu and @infinity Talk team thank you all the itel A56 phone have work this mng.l load the firmware downloaded from Sharif phone solution site using cm2 spd2.
Thank you all.
[09:43:44] Dra_lx2 ...y5 prime 2018
[09:37:53] cph1909 nvram damaged any solution ?
[09:37:38] Card found : E78xx581 , v0148
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.12

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.12 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol
[09:36:50] I don’t understand this
[09:30:28] He\'s waiting there
[09:17:04] Samsung a11
[08:42:54] ?????
[08:32:15] You can throw off the smart card driver
[08:29:16] ?????
[07:14:48] It may b working for people 🤷‍♂🤷‍♂🤷‍♂
[07:14:29] For me is not working
[07:13:42] Am not saying bad thing about d latest version but u guys nid to fix it
[07:13:11] I just install d old version and good
[07:12:47] Still hang at passed stage
[07:12:30] It ask me to update d dongle which i did....
[07:12:01] Straight up
[07:11:55] Dis happened to as well....yesterday i av to just go back to v.28
[07:08:37] What the problem
[07:08:31] Hi
[07:02:52] send teamviwer
[06:36:37] Software flashing
[06:34:21] what is the problem with phone
[06:32:07] I tried it with 2 phones
[06:30:08] problem of the fone
[06:29:47] So, no solution to my problem
[06:26:01] I’ve tried all that
[06:25:39] remove battery and re insert then try
[06:24:26] It’s still same
[06:23:42] I’ve uninstalled flexihub and also down press volume button
[06:13:05] press vol down bro
[06:12:22] I don’t understand you
[06:10:48] It stopped at this place
[06:09:11] P37 frp done cm2sp2
[06:07:58] Wait , you\'ll see yourself !
[06:04:45] How much is cm2 now?
[05:59:27] Ok
[05:58:04] Preloader: Ack confirm fail
[05:56:58] Pls am having errors Pre-loader Ack confirm fail
[05:53:32] I use it everytime so I guess jobs u get dont need it
[05:53:07] Download new 2.29d setup
[05:25:19] Infinity nowadays is disturbing,no use, no job with infinity dongle

I kept it in house
[05:24:33] mtk 2 v2.29 after installing setup not opening
[05:19:10] Chinese Miracle 2 v2.29 after installed
Not opened how to fix
[05:14:08] hi there infinity fam
[04:32:55] No text at all it just writes infinity and that\'s all
[04:15:43] Thank you for your help my friend 🤝

InfinityBoxTalks 2021-11-24

[22:31:44] MTK v2.29 not opening? Solution please?
[21:54:29] model Realme RMX 3263
[21:51:49] Works like magic
[21:51:37] Which build did you Download because both those files can\'t fail... more so the first one
[21:43:42] My bosses. @ElsonNzelemu and @sharif phone solution.thank you for having time out of your tight schedule to give concise explanations on the subject matter.I appreciated you guys.I have downloaded a file from Sharif phone solution site and the file load halfway and stop.
That\'s what make me think if am able to read the firmware of a working phone may be it can come alive or else I will wait to download the firmware from infinity flash file server.
And kudos to infinity Talks team.
You are the best.And to ev
[21:21:21] Join this project.





🔥🔥🔥
IT STARTED ALREADY.
🔥🔥🔥

Presale started on Pinksale
STARTED = 2021.11.23 - 21:00 (UTC)
END = 2021.11.30 - 21:00 (UTC)
Don\'t miss this opportunity!

1BNB = 1.25Million Dextera.
Minimum Buy 0.1BNB (Smartchain)
Maximum Buy 6 BNB (Smartchain)


https://t.me/dextera_instrumenta

🔰🔰🔰

https://www.pinksale.finance/#/launchpad/0x31C897E12563a1c644FF04D3D8CBfF6ED644d9CD?chain=BSC
[20:48:46] Am having smart card misconfiguration contact support
[20:32:40] Am having smart card misconfiguration contact support
[20:28:37] And I told him to get the files at my site, the first one works there and then though it is V018... I don\'t know what happened?? He will wait till Saturday then
[20:26:56] Probably also :)
If he dont understand, he might Need to go to someone which is understand
[20:26:12] I told him to do this in the morning not maybe he listens not. If files of android 11 can backup, what about 9?
[20:22:27] 👆🏽
[20:21:36] press identify , and wait for device fully being identified
[20:20:23] first of all you need to know the key combination for connecting in flash mode , probably one of the volumes buttons
[20:19:38] Quad-core UniSoC Spreadtrum SC7731E (32nm)
will give you a few pictures
[20:19:04] what processor is he?
[20:18:16] Yes my brother. Its even 2 working perfect itel A56 in my hand now.but the problems is I don\'t know how I can read the firmware with cm2 or other tools.pls if u get solution on this for me pls let me know.
[19:14:46] If the card software is updated, change directory to program files 86
[19:03:21] Need to re-backup
This firmware isnt flashable, only via fastboot or pac firmware
[19:00:21] i mean which software of infinity dongle qualcomm chip
[18:58:39] hello sir how to write srial no for xiamoi 11 lite plz
[18:58:36] , 🤷‍♂ I didn\'t seen it after backup, i think that\'s why I got hard time when needed to flash it back. Or sometimes the backup process was gone wrong, I don\'t know what happened during the backup process. I will try to find the different file from another phone.
[18:24:37] where are the xml programmer and the fg loader?
[17:40:42] Hello good evening sir ...please upload the network solution of Nokia c1 second addition....Thanks
[17:10:27] me2 mine is not opening
[17:09:54] Chinese Miracle 2 v2.29
Not opened how to fix
[16:40:01] no open me infinity
[16:39:51] Searching...
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 0003A2380-------
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): B10A-----
Firmware version: 0150.02
=== Started: 24/11/2021 11:23:55 a.m. ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication successfull
Service stage 1 confirmed
Securing session...
Session secured Ok
U
[16:23:27] Done
[16:04:41] anyone with drivers
[16:04:08] nokia Ta1139 security code remove
phone not detected by PC
[16:02:31] Dis
[16:02:22] Wat should i do to dis
[16:02:17] did you get one
[15:36:00] Qualcomm any updates waiting for Qualcomm update
[15:31:00] hello team, 😍 cm2 servers is on?/
[15:16:42] Mt 2.29 not opening ?
[13:57:29] Chinese Miracle 2 v2.29
Not opened how to fix
[13:53:52] Whats news for version 2.29 cm2 mtk2
[13:51:46] EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x73A000000 [ 28.91 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 1D64F01B14D8131F126F8ACFE75AAFE

DA : USB : HIGH-SPEED

Boot done!

Product Brand : TECNO
Product Device : TECNO-KC8
Product Model : TECNO KC8
Product Name : H6110
Patch Level : QP1A.190711.020
Display ID
[13:51:46] Card found : 2FC51D14 , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.29

Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Identify [ v2.29 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Identify [ v2.29 ]

Mode : FLASH

1.
[13:49:30] Cm2 2.29v not opened
[13:34:53] Card found : 2FC51D14 , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.29

Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Identify [ v2.29 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Identify [ v2.29 ]

Mode : FLASH

1.
[13:27:36] Card found : 2FC51D14 , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.29

Load IDBase v1121431 Ok!

Update configuration ...
Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.29 ]

Mode : FULL FACTORY ( WIPE + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify

[12:48:18] ok
[12:44:33] Card found : 2FC51D14 , v0151
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v1121428 Ok!

Update configuration ...
Socket Error # 11001
Host not found.
Update failed! Check settings and/or internet connection!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : FULL FACTORY ( WIPE + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V
[12:40:35] Help for KC8 DA file
[12:32:57] Card found : 7DEF7B43 , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : W6503
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed :
[12:25:12] How do I use this
[12:17:41] i don\'t know
[12:17:09] thanks so much for coming to my aid.I APPRECIATE.THANK YOU.
[12:17:01] Asus zenfone max pro m1 stuck on CSC fastboot mode
[12:15:46] Any help
[12:13:15] Okay
[12:12:52] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_2GB_1S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off
[12:12:52] Card found : 7DEF7B43 , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Id
[12:12:17] Need HMD NK2 Auth service for latest Nokia phone
[12:10:21] I am not using any usb hub or port
[12:10:09] Not able to fix this problem
[12:05:45] Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : W6004-SP591-9.0-OP-V018-20210309
MemoryInfo : EMMC : 16 GB ; DRAM : 1 GB

Platform Version: MOCORTM_17C_ITEL_RLS2_W19.28.5_P4_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_ITEL_RLS2_W19.28.5_P4
HW Version: sc7731e_modem
CMP_Time : 10-15-2019 12:10:52

MODEM TAG : MOCORTM_17C_ITEL_RLS2_W19.28.5_P4_Deb
[11:54:26] how do i get that pls? dont know how to get diag info from a working phone.pls teach me
[11:51:34] the second one is the one i am trying to read the firmware to fix the dead one. and that\'s the log above
[11:49:57] I have two of the same itel A56 in my hand the first one is rebooting and after i load a firmware from net is now dead.
[11:46:55] ITEL A56
[11:46:24] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control tra
[11:21:38] Ok
[11:20:09] Pls can cm2 read itel A56 firmware and how?
[11:03:22] Am seen cm2mt2 v2.29d can I update ?
[09:54:02] Share emi file and Da file of stylo DDJ18
[09:29:55] Cm2 watch video from YouTube for better guide
[09:28:55] Use unlock tool
[09:21:51] How to remove payjoy on stylo bold plus
[07:55:25] nokia TA 1383 password fail
[07:17:08] Card found : 3B4916F9 , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : P651L
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtru
[07:17:06] donr
[07:15:12] DONE THANKS
[07:15:01] 1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : TECNO PR651H
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0
[07:12:13] thanks let do
[07:11:38] here is the logs in dia mode
[07:11:19] Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : PR651H-F6317-11.0-OP-V036-20210622
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

Platform Version: MOCORTM_20A_W21.15.3_P5_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_20A_W21.15.3_P5
HW Version: sc9863A_modem
CMP_Time : 05-11-2021 10:59:41

MODEM TAG : MOCORTM_20A_W21.15.3_P5_Debug_4G_MODEM_20A_W21.15.3_
[07:10:45] ye vala he
[07:09:01] use this boot
[07:07:37] We\'re waiting for more to come especially Qualcomm module❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
[07:07:31] Tecno PR651h frp solution
[07:07:17] Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : P651L-F6316-11.0-OP-V023-20210720
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

Platform Version: MOCORTM_20A_W21.15.3_P5_Debug
Project Version: s
[07:06:59] hello team
[07:05:03] L6502 boot also select n tryed
[07:04:46] But now only stuck on kick fdl
[07:04:19] Thanks to great team ever
[06:54:48] which boot select
[06:53:35] how many charge?
[06:53:18] yes
[06:11:35] Thank you for replay but there is no XML file inside the backup
[05:51:35] ok
[05:48:21] Unlock by IMEI
[05:47:59] I did a search and i found this phone is original from HMD Only for unlock you need to buy code from severs 🤝
[05:43:46] MTK?
[05:43:16] not spd
[05:42:52] 5 credits for one operation.
[05:42:28] And post logs here
[05:42:22] If yes try
[05:42:06] Is SPD processor?
[05:41:43] ???
[05:40:37] Will flash without problems
[05:40:20] Is possible find XML file inside of your backup
[04:54:47] How will I activate it and what are the functions/Phones it supports mostly?
[04:40:29] Needrom said that is paid file while I need free one from a good friend here
[04:09:23] Please help
[04:08:51] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
AGE
[04:08:40] PLEASE I NEED THIS PHONE FIRMWARE

InfinityBoxTalks 2021-11-23

[21:45:04] please update qualcomm cm2 for support new xiaomi 🙏🙏🙏🙏🙏🙏🙏🙏
[21:42:42] please new update qualcomm cm2 for support xiaomi 🙏🙏🙏🙏🙏🙏🙏🙏
[21:37:42] I also try it imei comes ok but still no service ..
[21:28:28] erace nv data with cm2 memory tool ..then re write md1image as to repair...100%
[21:07:11] any solution team?????
[21:05:19] Firmware uploaded to support with mtsec Security backup
[20:15:31] 💪💪💪
[20:12:50] on meta mode .
[20:12:00] I repair imei after that??
[19:19:40] Infinity box is the best :)

https://forum.gsmhosting.com/vbb/f296/uniherz-jelly2-android-10-b-world-first-dump-imei-repair-read-nv-2995487/
[18:58:22] redmi 9c no service solution all mathed try but no success 😢😢
[18:57:46] So unlock
[18:35:48] Thank you
[18:33:24] Smartcard misconfiguration
[18:30:07] Hello , I want to know more about data extractor
[18:27:51] Or how to convert it to PAC file?
[18:23:37] How to flash this buckup that was done by infinity cm2sp2
[18:10:22] Thank you all
[18:02:24] Many thanks sir. The problem is completely solved.
[18:01:11] Probably have virtual machines Configuration in windows features, Need to disable
[17:59:19] Thank
[17:57:33] vertual mashine detected will close now problem ?
[17:57:17] 🙏🙏🙏🙏
[17:56:33] I want to download everything that is planned, thank you, I am new
[17:55:00] Dongle cm2
[17:54:42] I got a video tutorial to work with
[17:51:48] I want to teach you a little film, thank you
[17:49:55] 🙏🙏🙏🙏🙏
[17:49:42] Dongle cm2
[17:47:29] I\'m a novice, thank you for your help
[17:46:34] Hello to all of you, how many ounces of Dunkel cm2
[17:45:43] Sir, not opening problem
[17:45:24] not opening problem. V2.29
[17:44:00] Hello need help with Nokia C1plus I got how to connect it to cm2 but ends on sending boot done. And any operation asks for identify first
[17:43:34] Thanks
[17:42:38] I have CM2. It\'s either a problem or not ?
[17:39:20] No need drivers just run software
[17:38:48] when the news happens QLM
[17:34:45] Card reader drivers
[17:34:23] Infinity QLM (Qualcomm) new???
[17:34:08] Cm2 windows 10 drivers?
[16:44:07] thank you.
[16:44:02] once if support period active then it will be updated.
[16:43:05] to runs this update smart card firmware must be 0,151 run latest dongle manager and update smart card
[16:37:39] Thanks
[16:37:19] Re Dawonlod
[16:36:03] not open v2.29
[16:33:24] 👌 thank you friend.
[16:28:31] 😔
[16:28:29] 😒
[15:42:37] Sorry boss, am talking about iPhone 4s here not android
[15:34:35] Test if and fix it b4 releasing it
[15:34:04] Normally
[15:33:58] It not working
[15:33:36] Am not updating naw till it fix
[15:33:10] It full of bug
[14:56:47] Check for updates...
Connection failure. Disable Antivirus and Firewall
Finished
[14:44:26] ok
[14:40:36] sony4sNO1b
twKaPRrCd0
I copied the log on a note on my desktop my pc was unable to load yesterday so I format my pc but I still have device here with me
[14:40:34] Operation : Identify [ v2.29 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM42)
MODE : PRELOADER PORT
PORT : 42
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
[14:34:43] yes
[14:33:18] Preloader [HW DEV] Info :
EMI : DEV : MT6755
EMI : SRC : preloader_bbk6750_66_n.bin
EMI : CNT : 0003
EMI : [00] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 3.00 GB ]

Operation : Write Flash [ v2.29 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre
[14:31:40] read info is well done but while smart reset or flash getting this error
[14:30:09] not using hub
[14:26:11] i have done that but still same issue
[14:25:46] Also oppo A15 fail to repair imei on cm2 any help please.....
[14:25:22] frp
[14:24:33] Hlw Team
I need to repair imei on
Mobile Name:--- Infinix Mobile

Mobile Model number:-- Zero 8 X687

Device CPU Type:-- MT6785

Android Version:-- Q v10.0
Any help with cm2
[14:22:30] Operation : Write Flash [ v2.29 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :18
[FL] : Set : preloader_bbk6750_66_n.bin
[FL] : Set : recovery-verified.img
[FL] : Set : survival-verified.img
[FL] : Set : oem.img
[FL] : Set : md1rom-verified.img
[FL] : Set : md1dsp-verified.img
[FL] : Set : md1arm7-verified.img
[FL] : Set : md3rom-verified.img
[FL] : Set : lk-verified.bin
[
[14:20:03] Ok thanks for support
[14:18:34] How please
[14:18:20] vivo y69 error while smart reset
[14:17:51] helo
[14:13:56] How can I fix it
[14:13:40] This is what I get any time I open my mt2 v2.29
[13:48:03] Operation : Read Firmware [ v2.28 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM60)
MODE : PRELOADER PORT
PORT : 60
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPH
[13:46:35] i wan\'t make backup of Samsung a215u
[13:46:06] rsa auth?
[13:45:42] hi
[13:45:37] hi
[13:45:01] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : P651W
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[13:21:57] give me working link that I can download working one
[13:20:45] How do I remove password from neon ray pro with cm2
[12:28:51] Good job
[12:23:59] iPhone 4 iCloud bypass how 🙏?
[12:21:38] any update nokia best 2
[12:19:27] Thanks i have it
[12:19:10] https://mega.nz/#!UHokEIRY!ZK0Mo7Usy4xYqKs6p6uTA8H5O-MCHfcwL7YhJb4HjHY
[12:17:11] Google.com
[12:16:01] Imei options
[12:15:55] My sp2 module not show
[12:15:25] Please help me to get uk off file
[11:40:29] Always this problem after install new setup can’t run and also change color of icon. I downgrade to 2.28 run normal now
[11:25:20] still same
[11:25:12] PTFN : MediaTek USB Port (COM19)
MODE : BOOTROM
PORT : 19
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 1C67EF162F79BDDD53BDADC9C57B14CE
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : C0D033C696081F86E9196292319E1822D49DE111D2C0DA09AEF15655C06CD7EF
BROM : SLA : Local Auth
B
[11:25:12] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.29

Load IDBase v1121431 Ok!

UserName and/or Password not set! Can\'t continue!

Load IDBase v1121431 Ok!

Preloader [HW DEV] Info :
EMI : DEV : MT6765
EMI : SRC : preloader_k65v1_64_bsp.bin
EMI : CNT : 000B
EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]
EMI : [02] : DRAM : LP_DDR4X : ID : N
[11:24:45] Ok
[11:21:48] Nothing like 31G
[11:21:21] You need infinity best activation for cm2
[11:19:45] OK thanks
[11:06:15] Can someone suggest a site for me or ready to put me through.
[11:04:43] ok sir
[11:03:29] pls someone to help me out
[11:03:19] [FL] : RePartition
ERR : 0x00000000
ERR : OK
ERR : 0x00000000|0x00000000
[DEBUG] : REPARTITION_BREAK , Skip repartition

[FL] : Flashing now ...

Write : PRELOADER
FAIL : ERROR
ERR : 0xC0010001
ERR : ERROR
ERR : 0x00000000|0x00000000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!
[11:03:18] Files :25
[FL] : Set : preloader_k65v1_64_bsp.bin
[FL] : Set : recovery.bin
[FL] : Set : cust.img
[FL] : Set : vbmeta_system.bin
[FL] : Set : vbmeta_vendor.bin
[FL] : Set : metadata.bin
[FL] : Set : efuse.bin
[FL] : Set : md1img.bin
[FL] : Set : spmfw.bin
[FL] : Set : scp1.bin
[FL] : Set : scp2.bin
[FL] : Set : sspm_1.bin
[FL] : Set : sspm_2.bin
[FL] : Set : gz1.bin
[FL] : Set : gz2.bin
[FL] : Set : lk.bin
[FL] : Set : lk2.bin
[FL] : Set : boot.bin
[FL] : Set : logo.bin
[FL] : Set : dtbo.bin
[FL] : Set : te
[11:03:18] EXT_CSD Info :
EXT_CSD rev. : v1.8 ( MMC v5.1 )
CSD struct rev. : v1.2
Supported command sets : 1h
HPI features : 1h
BG operations support : 1h
BG operations status : 0h
Correct prg. sectors : 0h
1st init time after part. : 3000 ms
Min. write perf.(DDR,52MH,8b): 0h
Min. read perf. (DDR,52MH,8b): 0h
TRIM timeout: 0 ms
Secure feature support: 55h
Secure erase timeout : 8100 ms
Secure trim timeout : 5100 ms
Access siz
[11:03:18] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : HW Report [ v2.28 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM19)
MODE : BOOTROM
PORT : 19
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM :
[11:02:51] i tried re flashing the phone but this time around i am having some error
[10:57:32] Good morning house, I\'m new how can I get the basic?
[10:57:21] Which model will I use
[10:57:04] Is SPD ooo
[10:56:57] Huawei- BG2 -U03
[10:51:46] EXT_CSD Info :
EXT_CSD rev. : v1.8 ( MMC v5.1 )
CSD struct rev. : v1.2
Supported command sets : 1h
HPI features : 1h
BG operations support : 1h
BG operations status : 0h
Correct prg. sectors : 0h
1st init time after part. : 3000 ms
Min. write perf.(DDR,52MH,8b): 0h
Min. read perf. (DDR,52MH,8b): 0h
TRIM timeout: 0 ms
Secure feature support: 55h
Secure erase timeout : 8100 ms
Secure trim timeout : 5100 ms
Access siz
[10:51:45] Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : HW Report [ v2.28 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM19)
MODE : BOOTROM
PORT : 19
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM :
[10:46:36] Ok sir
[10:17:04] Download boot pack from support
[10:14:33] Need MTK UNIVERSAL
[10:01:29] TA 1352 network unlock?
[09:56:28] My CM2 version 2.29 is not opening
Please any solution?
[09:48:58] Luke
[09:47:47] And it shows unlock done
[09:47:26] Hello team I unlocked a Sony device and the Sony Ericsson still show invalid card
[09:40:41] How to reset Nokia c1
[09:40:30] Boss
[09:31:10] thanks
[09:29:51] Redmi 9c hang on logo I have flashed with two file now still same thing what can I do next.
[09:27:45] Is it supported by cm2
[09:26:59] Is it supposed
[09:26:55] Nokia c1 factory rest
[09:25:00] I have cm2 dongle box n I need infinity Best nk2 as well..can I upgrade my cm2 dongle to work work with infinity Best nk2?
[09:23:24] Samsung ww frp remove service available remotely
WhatsApp/telegram +8801913569358
@phoneunlockerside
[09:23:19] Someone should educated me on this
[09:21:41] NOTE: Currently this product is discontinued due to CDMA market situation. You can upgrade your Infinity CDMA-Tool Dongle with other Infinity products and get new life for your dongle.
[09:20:40] Thank you sir, have done it already with cm2sp2.
[09:17:33] Yes.. to fix the bug of not open complain by user, it will be in support in view minute.
[09:01:33] Thks for support team for help
[08:59:42] or my network is poor
[08:59:42] i could not find latest mt2 v2.29 setup on support
[08:58:52] It was a small bug with install package.
Fixed version will be at support area in 15 minutes
[08:57:51] V2.29 not open but 2.28 good working ?
[08:53:31] Ok sir
[08:53:14] And for infinix
[08:52:58] Tecno spd chip
[08:52:44] But please update
[08:49:57] It was frp
[08:49:54] I have done it
[08:24:54] I have the same problem
[08:24:10] Install bootpack
[08:09:39] Error [0×FFF]
[08:06:43] Oppo cph1909 imei update failed pls solution
[07:58:37] Ok done
[07:55:04] I need a working dongle manager please
[07:52:08] From yesterday am requesting for guidance of spark 7p spd frp solution
[07:51:05] The interface does not open
[07:48:42] How to remove kf7j frp
[07:36:33] Ok
[07:35:07] This is open but it IS executable
[07:34:16] [pub] /software/
https://dl1.infinity-box.com/00/pub.php?dir=/software
[07:33:59] I download here but not open
[07:27:00] Thank bro
[07:26:47] https://mega.nz/file/Eso1VQwb#RjR2MB_8hmuTIW87LfLY2waw1Lqof81STiMJ8b3hHzs
[07:26:30] Hi after new update my cm2mt2 not opened!

I change install folder but not solved

How i can solve this issue?
[06:47:46] https://mega.nz/file/Eso1VQwb#RjR2MB_8hmuTIW87LfLY2waw1Lqof81STiMJ8b3hHzs
[06:42:01] How to solve this problem
[06:40:29] Cm2 mtk 2. 29 not open solution
[06:38:05] Any one has A015F MDM firmware flashable in test point
[06:37:18] This is payjoy come
[06:17:00] congratulation
[06:14:13] I’ll try all cpu platform
[06:11:23] Premio x84 cpu platform anyone know
[05:56:53] 👍
[05:45:27] Restart and stuck on logo
[05:43:13] X626 dead after flash need help
[05:42:08] https://forum.gsmhosting.com/vbb/14482325-post12.html
[03:36:13] This phone is strange for me my friend
[03:20:11] I used smart reset
[03:18:48] Password
[02:56:22] Ok
[02:55:23] Please help me with Tecno BD3 FIRMWARE
[02:49:03] This issue of cm2mk2 is disturbing !!!
Permanent solution please!

It disappear just after open !
[02:28:31] Can I use this one to read firmware from Tecno BD3
[01:39:52] ؟
[01:01:53] V12.13
[01:01:05] Hi team any one with redmi 9c global firmware ??, I downloaded the one from support now my phone is dead
[00:05:04] https://www.youtube.com/watch?v=4mZMBpJdO30&t=6s

InfinityBoxTalks 2021-11-22

[20:40:37] Pls how to remove tecno pop5(bd2) frp with cm2SP2 thanks
[20:39:15] 👍
[20:38:29] Ok thanks you sir
[20:29:08] Download this file and then put it in CM2SP2 folder you will see imei writer options. https://t.me/InfinityBoxTalks/38129
[20:10:23] How to also enable imei writer on cm2sp2 thanks
[20:09:03] Good day team pls how can I remove tecno pop5 bd2(spd) frp with cm2sp2
[20:08:03] Thank you, the job done. I didn\'t know that the internet is required to remove frp, I hive thanks to @SOMETEXT after seen his comment to someone.
[19:33:55] And ur good to go...
[19:33:16] Rssa..or RSA boot.. u need as well login ur iOS under settings.. connect the PC to the internet....then select the boot....w6501
[19:30:38] This model itel w6502 not exist in model list although already tried with no success
[19:26:11] itel p36 boot or fdl file for frp?
[19:19:07] I have flashed it with another file and it came up but hang on logo
[19:15:39] Did you found the solution for these itel w6502 frp remove?
[18:06:10] Unlock bootloader. It will come up
[17:56:50] A21s
[17:37:37] How to solved it ?
[17:10:37] Polisi
[17:03:58] Thanks it worked 100%
[16:55:45] How to report stolen dongle
[16:28:07] 593 107 167
a5t2i1
[16:24:37] 593 107 167
a5t2i1
[16:23:56] It\'s now ok
[16:23:29] ok am leaving till your network is ok
[16:22:56] Blood my network is poor
[16:22:36] are there
[16:19:44] send teamviwer for assistance this time w/o delay
[16:12:59] Then help me with spark 7p frp I can use my neighbor\'s pc
[16:01:42] ok...thanks..i will that now
[16:01:16] unbricking file bro use it
[16:00:43] ok...will this file correct the phone cuz for now the phone is not coming up just vibrating
[15:59:52] ☝️
[15:58:59] https://drive.google.com/file/d/1EoiLQxOL4gvrwjrumjUySzLFJh_XgyxS/view
[15:58:09] the phone was showing the system damage before that was the reason why i flashed it
[15:51:32] i flashed redmi 9c and the flash was successful but now the phone is not coming up phone is not coming up again pl what can i do
[15:50:10] [FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:03:29

Reconnect Power/Cable!
[15:50:10] PTFN : MediaTek USB Port (COM19)
MODE : BOOTROM
PORT : 19
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 1C67EF162F79BDDD53BDADC9C57B14CE
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : C0D033C696081F86E9196292319E1822D49DE111D2C0DA09AEF15655C06CD7EF
BROM : SLA : Local Auth
B
[15:50:09] Card found : 7DF8303B , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Created by Infinity-Box (c) 2021
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt

Product Brand : Redmi
Product Device : angelican
Product Model : M2006C3MNG
Product Name : angelican_eea
Patch Level : QP1A.190711.020
Display ID
[15:49:15] Why does it disappear when I open mt2 and sp2
[15:33:52] Spark 7P da file please
[15:33:17] Help me
[15:33:17] Why doesn\'t my cm2MT2 and cm2SP2 can\'t open on my pc but on another pc it opens
[15:10:52] Make bro
[14:51:18] model?
[13:48:02] INFINIX SMART Help to format
[13:47:28] MODE : PRELOADER PORT
PORT : 8
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : INFINIX : G70[G80][G90] | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_G7xG8xG9x.bin
AGENT : CHANGE :
[12:51:04] Thanks
[12:47:35] I have posted here several logs
[12:47:10] I have posted here several logs
[12:20:38] Frp ?
[11:56:23] Help fix this error
[11:37:53] worked!!!!👈🏾✌️👌👍
[11:27:52] bb2-vp572DE-QGO-OP-210115V006 preloader or scatter i need help
[10:24:34] 😂
[10:17:32] Use latest exe, 2.28
[10:15:03] Operation : Identify [ v2.22 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM10)
MODE : BOOTROM
PORT : 10
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : MEID : 63426DF6433F3620737216EB98C563CF
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
B
[09:23:14] still new modal mobicel neo sc9832e
[08:44:28] Bypass bro!
[08:27:42] i need fld loader
[08:27:34] 191SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mobicel_Neo_1_SS_T_L_V01_20210420_MP 11 RP1A.201005.001 26142 release-keys
MemoryInfo : EMMC : 8 GB ; DRAM : 1 GB

Platform Version: MOCORTM_20A_W20.51.6_P1_Debug
Project Version: sharklp
BASE Version: 4G_MODEM_20A_W20.51.6_P1
HW Version: sc9832e_modem
CMP_Time : 12-29-2020 21:38:25

MODEM TAG : MOCORTM_20A_W20.51.6_P1_Debug_4G_MODEM_20A_W20.51.6_P1_sc9832e_modem_sharklp


PSN1 : 5082148132071106

NVMng : SecurityInfo
IMEI[1] : 355459
[08:12:46] I just want to know how I put credit into my cm2 dongle
[08:12:18] This guy need money to help me
[08:12:07] What kind of help with money
[08:11:05] FDL loader???
[08:10:20] SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mobicel_Neo_1_SS_T_L_V01_20210420_MP 11 RP1A.201005.001 26142 release-keys
MemoryInfo : EMMC : 8 GB ; DRAM : 1 GB

Platform Version: MOCORTM_20A_W20.51.6_P1_Debug
Project Version: sharklp
BASE Version: 4G_MODEM_20A_W20.51.6_P1
HW Version: sc9832e_modem
CMP_Time : 12-29-2020 21:38:25

MODEM TAG : MOCORTM_20A_W20.51.6_P1_Debug_4G_MODEM_20A_W20.51.6_P1_sc9832e_modem_sharklp


PSN1 : 5082148132071106

NVMng : SecurityInfo
IMEI[1] : 355459740
[08:03:05] I want help
[08:02:11] Help me pls
[08:00:21] i need to remove frp
[07:59:52] i get this error when i try to remove with cm2
[07:59:02] PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suita
[07:59:02] Card found : 34EC1EC9 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM11)
MODE : BOOTROM
PORT : 11
Waiting BOOT ack ...
BR
[07:58:32] Technology ke5
[07:52:26] Guys I just got a little problem m just confused
Can anyone pls help me
I want to unlock the network of Nokia c1
Thay ask me I must have credit on my cm2 dongle so I just want to learn how I put money to my cm2 dongle then I unlock the Nokia c1
[07:49:45] Hi evryone
[07:41:54] how to remove M250Y remove parental control ?
[07:34:31] Neon ray pro imei repair pls.after reset restores original imei
[07:03:16] Then come back and post results with logs
[07:02:28] He must know to use test points
[02:31:51] Much
[02:31:48] A31 not
[02:31:35] A21 not
[02:31:32] A32 not
[02:31:26] A22 not
[02:31:12] No

InfinityBoxTalks 2021-11-21

[23:45:58] Mtk
[23:45:53] I need support for model Samsung
[23:44:28] Frp and factory reset Nokia g10 ta-1346, full tested by cm2
[23:31:05] https://www.martview-forum.com/threads/nokia-c2-ta-1233-format-fs-reset-settings-done.54277/
[23:30:54] https://forum.gsmhosting.com/vbb/f296/nokia-c2-ta-1233-format-fs-reset-settings-done-2995259/
[19:09:03] Thank you so much my brother
[18:22:54] 👏
[18:21:48] Yes please
[18:19:06] Please add nokia c1 second edition TA-1380 and nokia ta1322 nokia 1.4 for password
[16:27:40] اسأل المشرف انه سوف يساعدك
[16:08:32] أنا مستخدم جديد
[16:08:25] بدي مساعدة بخصوص اصلاح رقم ال imei
لأجهزة ال MTK
بواسطة CM2 Dongle
[16:07:42] في حدا بيحكي عربي؟
[14:28:05] pls how do i resolve ip has been change as i am trying to login to my ios
[14:26:01] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM22)
MODE : PRELOADER PORT
PORT : 22
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM
[12:39:01] این را خودت شیر کردی درست است
[12:16:10] EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x1D2000000 [ 7.28 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 52FF9F70D82E0D2C7DDB650BAE90EACD

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Product Brand : STY
[11:15:50] try untick boot done
[11:15:09] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : A58BA15EFABC3774D2E406B5C82D203F
BROM : SecLevel : 0x000
[11:14:25] thanks sr
[11:14:05] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : A58BA15EFABC3774D2E406B5C82D203F
BROM : SecLevel : 0x000
[10:46:28] Huawei Y5 Prime (2018)
[10:34:31] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : A58BA15EFABC3774D2E406B5C82D203F
BROM : SecLevel : 0x000
[10:03:25] qcmp. eo93
. umm a
[07:47:53] firmware please
[07:47:46] vitu hot 7
[06:23:48] 👍👍👍
[05:49:09] FRP OK👍👌🏿

InfinityBoxTalks 2021-11-20

[23:18:39] On 17th, I installed mediatek SP driver & I guess that was causing the problem so I\'ve uninstalled it including all MTK drivers.
Then installed only the OPPO MTK drivers 2.0 on the IOS page.
I haven\'t tested it with any device yet. Will prompt you when I do.

Thanks for the reply.
[22:26:58] Please help me with this firmware
[22:05:23] qualcomm update
[21:58:33] dead project bro
[17:58:28] waiting qualcomm update
[17:02:00] Samsung all model dual rom free file where can i get
[16:50:40] SAMDoctor_Tool_v1.1.0001.exe
Released More models Added

Functions:
Patch cert Android 7-10(no credits)
SPC 0000 Fixed


And more bug fixed:
[14:25:11] Next update we need kg unlock on Samsung mtk
[14:22:29] Hello admin please help
[11:56:05] how to unlock network on Stylo S40 life?
[11:43:22] okay
[11:29:22] error

=== DongleManager [Infinity] v1.88 [20/11/21 02:05:23 ã] ===
Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Card-Reader: DITS Ezy Smart Card reader SCR2012 0
HWID: 000010ED13E64082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): 794110ED
Firmware version: 0149.02
=== Started: 20/11/21 02:05:26 ã ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on
[11:23:20] ❤️
[11:17:47] Most importantly, I do not mean any offense in my question. Thank you
[11:17:13] My friend, there is no offense when I say that the Qualcomm interface is asleep because this is the reality. As for the news of Xiaomi devices, it is true because the dft and unlock tool team have supported unlocking the bootloader in edl mode for Xiaomi devices, so I asked the question
[11:09:32] There is no insult in the question, but just a query about the Qualcomm interface and is there an upcoming update
[10:36:05] qualcomm ui sleep😢
[10:34:56] hi
plz support ql
all team add new loader xiaomi
y you not?
[09:11:00] Also waiting
[08:11:47] Okay bro waiting
[08:07:35] Yes its spd but no diag cant enter diag
[07:24:18] Hello morning sir when are you going to upload Nokia c1 second generation network unlock
[06:52:42] Ok
[06:12:36] Hi,
For 3 days now, my laptop goes to blue screen when using cm2mt2 to identify.
Can anyone help fix that problem?
[01:06:26] I need to cm2 Qualcomm driver
[01:06:12] Hello

InfinityBoxTalks 2021-11-19

[19:56:46] JM-MegaPackTools Crack link
https://bit.ly/321Mtlj

Miracle thunder v3.25 Crack
Miracle Xiaomi tool v1.59 Crack
Miracle Motorola tool v2.07 Crack
Miracle Huawei tool v2.20 Crack
Uat Uni-Android tool v27.02 Crack
UAT Pro v133.02
Uat Qualcomm v8.02 Crack
Uat MTK v4.02 Crack
Uat eMMC ISP v5.01 Crack
Uat FRP v13.01 Crack
Uat Huawei 4.01 Crack
Furious Gold - QCOM SMART tool v1.0.0.11068 Crack
Furious Gold - SPD Tool v1.0.0.4544 Crack
Furious Gold - OTZ Flasher v1.0.0.1681 Crack
Furious Gold - MTK Code Reader
[19:42:18] How flashing Ta-1212 using best
[19:35:36] Pls , itel A33 firmware needed please
[17:53:51] Please I need this firmware
[17:53:39] Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash
[17:00:26] cm2 ativce fess
[16:45:31] 9ja and data wahala
[16:25:52] I already tried drivers to be installed in this site. But not installed any drivers. What can I do pls?
[15:40:20] Okay 👍 I get
[15:39:12] Mean the infinity dongle box
[15:31:25] Activation expired next year 3 Nov
[15:29:48] How can I buy the same set of box
[15:29:25] Buy best dongle? How what\'s the usefulness of infinity dongle
[13:47:03] Done ✅ is working properly
[13:46:41] Check card connection with reader
[13:45:47] What error you getting
[13:11:49] But Nk2 is not working..
[13:08:19] Am even using it
[13:03:41] Yes
[12:26:11] Mine not!
[12:25:33] Is it activated?
[12:24:43] Infinity team ,solve this issue!!!
[12:23:50] My cm2 is not opening nk2
[11:52:30] Wich model
[11:22:23] Hi
[11:17:59] Hello
[10:59:52] Nigeria
[10:24:47] Hello nokia c10 supported or not
[09:17:56] Location
[09:15:03] here is the full log

Card found : 584B2C3C , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.24

Load IDBase v524190 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.24 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM16)
MODE : BOOTROM
PORT : 16
Wa
[09:14:32] can you help me please
[09:14:24] i have problem with redmi 9c its not connecting to the cm2 mt2 its saying DA : SETUP EMI PARAMS FAILED!
[09:13:35] hie brothers
[09:12:57] samsung A1 core A013G scatter firmware please
[08:55:11] Mobicel rebel firmware
[07:49:26] \',o
.
[07:37:21] OK.thanks
[07:05:27] My cm2 is not flash latest spd it will earase the phone and the file will not enter any solution
[06:57:39] Nokia C2 fdl please for Frp.
[06:28:28] Hello team, Need A013G U3 cm2 firmware
[05:28:01] You can do by hardware same model
[05:11:33] hello team can i repair emmc with usb ?
[00:30:19] Problem is from your phone or PC settings change it or reset it

InfinityBoxTalks 2021-11-18

[22:43:31] So am calling for help 👏👏
[22:42:37] I always spend twice the original size of the firmware or file
[22:40:32] Please I need help, each time am downloading file from ios support, the data charged is twice that of the file gigabit, please help 👏👏
[20:37:55] Not connect in flash mode
[20:37:36] Is this the problem not connected in diag mode phone power on automatic
[20:16:17] Cool
[20:12:48] Gsm hosting files
[19:32:01] @apizu files
[19:28:14] Any way to remove MKOPA LOCK
[18:42:47] Add screen shot
[18:23:25] https://www.martview-forum.com/threads/xiaomi-redmi-9a-dandelion-imei-repair-done.54163/
[18:23:08] https://forum.gsmhosting.com/vbb/f296/xiaomi-redmi-9a-dandelion-imei-repair-done-2995006/
[18:10:48] Any help
[18:01:40] Meaning of this errror
[17:47:33] Oppo cph2083 imei repair solution
[17:44:52] Ok admin I will that
[17:43:54] Pls admin help ur bro
[16:57:38] Morning how
[16:35:39] I need infinity best dongle driver pls.
[16:21:43] How to fix this
[16:00:02] Cm2 not support unlocking mtk phones
[15:20:49] Hi
[13:05:11] 🥱🥱
[12:20:39] Samsung A3 MT2 Not detecting
[12:17:38] https://t.me/smartunloker1
[12:10:26] MTK
[12:10:21] unlock
[12:10:11] Nokia G20
[12:10:02] Halp
[12:09:22] Come
[12:09:04] Samsung A02 frp pls cm2 not decdting
[11:30:48] Can you help
[11:30:38] My credits disappeared in my account
[08:35:35] Happy
[08:26:39] Good Job 👌👌👌
[08:00:46] 🆒
[08:00:23] 👊 cool
[08:00:19] Good job
[07:57:36] https://forum.gsmhosting.com/vbb/f296/oppo-cph2325-one-click-demo-remove-done-2994942/#post14480570
[07:54:59] Congratulations 👍
[07:54:26] চংরাতুলাতিওন্স👍
[07:49:03] Congratulations
[07:48:34] https://forum.gsmhosting.com/vbb/f296/vivo-y21-2021-one-click-demo-remove-done-2994941/#post14480567
[07:47:11] https://forum.gsmhosting.com/vbb/f296/vivo-y33s-one-click-demo-remove-done-2994940/#post14480565
[07:47:11] Support forum https://infinity-box.com/support/?r=8
[07:44:50] Congratulations
[07:44:18] https://forum.gsmhosting.com/vbb/f296/vivo-y33s-one-click-demo-remove-done-2994940/#post14480565
[00:21:19] Hi team, infinity SP2 support nokia TA-1380 Unisoc?

InfinityBoxTalks 2021-11-17

[20:34:15] Médusa pro
[20:33:28] Please send me the diagram.
[20:29:29] Médusa pro oui s\'il vous plaît comment réaliser le test.
[20:28:23] ufi box, Medusa pro emmc by isp pinout. whatch on YouTube for mor details
[20:25:29] S\'il vous plaît vous connaissez comment on peut débloquer téléphone
[20:23:18] 💰
[19:35:38] isp image needed any one have ???
[19:11:00] Thanks
[19:06:52] Itel p681lm supported frp by cm2?
[18:43:13] Hi anyone can assist with .fg boot file for itel p681lm( itel p37)
[18:16:17] Cm2 dowload tool link
[17:18:31] With best
[17:18:07] Ta-1021
[17:18:01] Please help me to repair imei
[13:15:41] K thnxx
[13:01:41] Hie guys can yu unlock network on nokia c1 2nd android 11 with cm2
[12:55:13] Hello infinity supporter ihave oppo cph 1729 oppo a83 cm2 error da
[11:19:12] another way exist?
[11:18:18] can help me someone to flash nokia ta-1080 with infinity ? I try to flash with infinity best 2 in bl tab, but I have this situation:Device : E2M ( E2M )
BLType : RETAIL
SecVer : 04
Device authentification ...
Processing server operation ...
Connecting to server...
Connection faled: Socket Error # 10061
Connection refused.
Disconnected

Error : Server Connection failed! Connection error or bad credentials?
Check previous message for more info!

Reconnect Power/Cable!
[10:48:01] Help me 👆 link
[10:47:33] https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=487784
[10:39:47] He\'ll no help
[10:01:50] Thanks
[09:49:12] Device info :
Patch Level : MRA58K
Display ID : DP36-LC8-WELCOME-20210311
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01
Build Time : 10.05.2021
Product Brand : Qnet
Product Name : sp7731g_1h10_hd_oversea
Product Device : sp7731g_1h10
Product Board : sp7731gea_hdr
Product Manfct : TECNO
Board Platform : sc8830
Product Info : sp7731g_1h10
Product Model : LC8
[09:49:06] please i need this file
[09:48:45] hello
[09:35:16] Hi team itel s16 no imei problem I.e imei 0 any one with backup nv??
[09:01:12] https://www.martview-forum.com/threads/nokia-c20-ta-1352-unlock-done.54097/
[08:57:30] https://forum.gsmhosting.com/vbb/f296/nokia-c20-ta-1352-unlock-done-2994839/
[08:42:01] Finished thanks
[08:41:35] Thank
[08:41:29] Good job
[08:41:19] Thank bro
[08:41:10] How boot broom mode a10s
[08:40:46] Yes
[08:40:40] Preloader mtk ok? For sla?
[08:39:58] Have tp a10s?
[08:39:21] But on youtube all video tick sla
[08:38:23] I install libusb filter mtk not work not happen
[08:36:42] Not work

Without sla can detect but not booted

With sla not detect


On device manager have preloader mtk driver
[08:32:48] How can I close it to get text logs
[08:32:20] Ok
[08:31:47] It\'s pops like that
[08:28:44] I need flash file
[08:28:01] Help
[08:27:30] I used MTK2 to flash Frp and it\'s hanging like this kindly help
[08:27:20] I used MTK2 to flash Frp and it\'s hanging like this kindly help
[08:27:06] https://youtu.be/I2c3RWHrQCg
[08:24:15] Bro you can see on picture


When i tick sla option at all not happen
[08:18:31] 🥶🥶
CAN HELP ME HOW TO BOOT A10S WITH CM2

I SEE ALL VIDEO ON YOUTUBE AND DO IT BUT NOT RESULT
[08:13:16] HELLO PLEASE I HAVE FIRMWAARE FOR TECNO BB2 VP572DE
[07:49:06] Ok
[07:48:19] This is virus infected
[07:36:18] 2.14 is not for me . I guess
[07:36:10] Can you please send the v2.13 setup
[07:34:33] Still not working
[07:25:33] BONJOUR LES MEMBRES SVP AIDER AVEC LA ROM DE TECNO POP3 DU MODEL BB2 VP572DE. MERCI D\'AVANCE
[07:24:28] Nokia TA 1380 hard reset solution?
[07:18:35] Ok
[07:09:59] Now even sp2 logo is gone .
[07:07:28] Problem is with sp2 only
[07:07:17] If i open mt2 . It working ok
[07:05:46] ?
[07:04:29] Then disappear
[07:04:24] If i try to open . Its shows infinity ♾ sign
[07:03:46] What should i do?
[07:03:38] But sp2 2.4 not opening
[07:03:28] Everything is working
[07:03:21] I downloaded the sp 2.4
[06:33:04] https://easy-firmware.com/index.php?a=downloads&b=file&id=367488
[06:32:58] Please help with this firmware
[05:33:31] ok
[05:32:03] Need help with this file
[04:43:09] How or inbox me
[04:42:03] U zip file and open with login server
[04:35:37] Wich mtk
[04:35:24] Chipset
[04:16:26] X657, X657B DA file needed
[04:14:55] Infinix X657 DA needed for passcode and FRP
[02:37:30] Hallo will u upload Safaricom Neon Ray J11 V04 android 10 firmware pliz
[01:11:51] with
[01:11:43] hello sir removing Mİ account is possible eith infinity dongle ?

InfinityBoxTalks 2021-11-16

[22:29:03] Identify
[21:58:02] good evening frp tecno ke5, why does it say this👇
[21:51:20] Same problem
[20:56:59] Then download firmware from ios support to flash it
[20:46:58] I did same severally but no way out till now
[20:42:23] Read error in memorytool too
[20:42:00] [23] Read partition : LK
ERR : 0xC0010001
ERR : ERROR
ERR : 0x00000000|0x00000000

[24] Read partition : LK2
ERR : 0xC0010001
ERR : ERROR
ERR : 0x00000000|0x00000000

[25] Read partition : LOADER_EXT1
ERR : 0xC0010001
ERR : ERROR
ERR : 0x00000000|0x00000000

[26] Read partition : LOADER_EXT2
ERR : 0xC0010001
ERR : ERROR
ERR : 0x00000000|0x00000000

[27] Read partition : BOOT
ERR : 0xC0010001
ERR : ERROR
ERR : 0x00000000|0x00000000

[28] Read partition : LOGO
ERR : 0xC0010001
ERR : ERROR
ERR : 0x00000000|0x0
[20:42:00] Operation : Memory Tool Init [ v2.28 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Dispositivo serie USB (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : FCD40D0961982E50062CDEBAA22A9352
BROM : SecLevel : 0x000000E1
BR
[20:25:06] error trying to read firmware!
[20:22:48] Operation : Read Firmware [ v2.28 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Dispositivo serie USB (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : FCD40D0961982E50062CD
[20:18:31] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Dispositivo serie USB (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : FCD40D0961982E50062CDEBAA22A9352
BROM : SecLevel : 0x00000
[20:15:16] someone explain to me why this error please
[20:14:45] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Dispositivo serie USB (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : FCD40D0961982E50062CDEBAA22A9352
BROM : SecLevel : 0x00000
[19:57:18] I do that
After update have black screen
[19:57:02] A
[19:56:54] Tu
[19:46:00] Sometime phones use to act funny, just flash it with that same backup it will work
[19:36:28] I experience a challenge with Infinix X682B I did backup of the firmware and return into thesame phone only for the phone to be Bricked
[19:17:25] If your phone not booted after your failed operation, you may need to unscrew the battery and reconnect, it\'ll power on if not soft breaked.
[18:30:20] Operation : SP Unlock [ v2.28 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM40)
MODE : PRELOADER PORT
PORT : 40
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM
[17:36:25] No bro
I dont know
[17:05:03] Was your problem solved?
[16:42:08] I bought a new dongle but it does not send the license on my email, I was try any pc, any windows but not done. Please fix this.
[16:25:43] 🤔
[16:20:32] Infinity best hang page when creat license, I was disable firewall and Ant versus, please help me.
[16:18:39] 😀
[16:17:23]  please make a screenshot of error.

 

 11-26-2014, 08:45  #13 (permalink)

raajsharma

Freak Poster



 


 

Join Date: Apr 2011

Location: Aligarh ,India

Age: 33

Posts: 128
Member: 1564947
Status: Offline

Thanks Meter: 13

After installing infinity best it hangs on create page. Nothing happens next only hanged on main screen.
need help
[15:54:07] What can be a boot key for hurricane mobile model: dual button phone
[15:35:00] TA-1380 has any way to unlock network?
[15:34:40] Hi Admin
[15:16:26] suported network unlock cm2 or
[15:16:08] nokia g10
[14:26:38] Bro check pv
[14:04:49] https://forum.gsmhosting.com/vbb/f296/alcatel-vfd-527-mt6739-write-flash-done-2994774/
[14:04:28] https://www.martview-forum.com/threads/alcatel-vfd-527-mt6739-write-flash-done.54074/
[13:58:06] https://forum.gsmhosting.com/vbb/f296/xiaomi-redmi-9-mt6768-smart-reset-extra-done-2994773/
[13:57:40] https://www.martview-forum.com/threads/xiaomi-redmi-9-mt6768-smart-reset-extra-done.54073/
[13:30:28] i think because its very new processor maybe software need some more adjustments
[13:29:24] for example , single partitions flashing works on most partitions
Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block v
[13:29:04] iv dumped firmware from new device to unbrick old one , but when flashing failed iv said , maybe device has hw issue , so i tried to flash the new one.
[13:27:49] works fine.
[13:27:42] new device
[13:26:58] stuck in preparing targer
[13:26:54] flashing device android 11 ums312 A/B from dumped firmware by cm2
[13:26:40] Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash B
[12:56:21] 😂😂😂😂 dnt wory it can be fixed 😃😃
[12:49:49] Im comfused now
[12:49:37] Customer is after me😂😂😂
[12:40:10] dnt wory its easy
[12:38:54] Too much struggle my friend😂😂😂
[12:38:23] you must reset pass from login in browser then enter that you read from dongle manager then to Cm2 sw
[12:32:49] Read username and pass with Dongle manager and when i try to login with the username and pasword fails
[12:31:50] Need help
[11:45:49] ok sorry bro.
[11:39:45] Paid
[11:17:13] Hello me 2 i want to sp enlock and the Sofwear stop at 21% and the phone was dead
[10:46:29] waalaikumassalam
[10:46:22] Qualcomm supported?
[10:33:02] NEON RAY PRO FIRMWARE ...The phone is dead kindlly
[10:01:15] Please help me to find this firmware
[10:01:03] Operation : Identify [ v2.13 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL :  EMMC_RO : False
[09:54:08] I uninstalled cm2 and libUSB_Win32 and reinstalled cm2 and everything worked
[07:32:34] ❤️❤️
[07:28:51] Ok bro. Thanks for help🌹
[07:28:13] http://dl1.infinity-best.com/47/pub.php?dir=software/archive/&uid=18458&file=InfinityBox_install_BEST2_v1.02.7z
[07:27:25] InfinityBox_install_BEST2_v1.02
[07:25:02] Option not work
[07:24:15] Please help me b
[07:24:04] .
[07:12:12] OK THANK U BRO
[07:01:50] Rmx3201
[07:01:39] Anyone have tested file ?
[06:48:32] Mtk cpu
[06:27:48] Realmee c21 flashing sopurted ? Cm2 mt2
[05:24:20] Assalam o Alaikum nokia c1 2nd edition any solution
[02:01:01] Go to software Settings and enter your IOS Username and Password, see video https://www.youtube.com/watch?v=KogYDEkg-O8
How to get Username and Password - https://infinity-box.com/support/?r=22

InfinityBoxTalks 2021-11-15

[23:40:42] Please help me
[22:25:38] Logs
[21:39:26] give the technique number
[21:38:50] S16 is commercial number
[21:31:57] Help
[21:30:55] 👍
[21:22:04] good evening Admin please network unlock file, Alcatel 5007u please thank you
[18:55:17] ZTE BLADE L8
[18:55:09] >>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Read NVM [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
>>> ERROR : FDL Start Failed!

>>> Error : Fail to boot FDL!
>>> U
[18:55:09] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...


>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
[18:41:10] Yah, in these mt6739 I didn\'t success to sp unlock but gor other operations no problems.
[18:38:45] Having any challenge?
[18:38:09] Ok
[18:31:44] Didn\'t use any tool apart from CM2MT2
[17:48:13] Did you use different tool to boot you device to meta mode or cm2 itself switched device to meta? Because I got the phone with the same CPU as yours and failed to boot to meta. How is it done for u?
[17:36:29] itel s17 frp support pls help!
[17:36:12] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData
>>> INFO : FRP reset require FlashMode!

Reconnect Power/Cable!

Done!
Elapsed: 00:00:27
[17:35:25] in meta mode

Operation : SP Unlock [ v2.28 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM40)
MODE : PRELOADER PORT
PORT : 40
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META enter failed by timeout!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/C
[17:28:51] i want to perform SP UNLOCK on Vodacom vib 3G i\'m getting this error


Operation : SP Unlock [ v2.28 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM40)
MODE : PRELOADER PORT
PORT : 40
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY
[17:28:08] itel s17 frp remove plss help
[17:10:23] Nice
[17:03:53] Can you add \"switch to meta mode\" command in CM2MT2 because when want to SP Unlock on some devices it fails to switch device to meta mode.
[16:03:36] Nice
[16:02:08] Support forum https://infinity-box.com/support/?r=8
[15:56:29] Operation : SP Unlock [ v2.28 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM40)
MODE : PRELOADER PORT
PORT : 40
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM
[15:56:02] i want to sp unlock vodacom VIBE 35 im gating this
[15:23:59] ????
[15:23:53] Tecno BD2P pop5 frp reset
[14:33:01] E1M-055F-0-00WW-B01 file need
[14:22:47] Planned this year release QLM?
[14:15:39] Thanks alot be blessed
[14:14:07] Thank you
[14:09:18] Hello sir please add Nokia c1 2nd addition also
[13:09:26] 🙄
[13:01:10] @dmin please, what to do next?
[13:00:37] No sir
[12:59:48] Wit it cm2
[12:59:36] Can i flash guilt file
[12:59:28] Is update
[12:59:23] i would i no if d dat base
[12:59:09] Ok
[12:57:24] And miracle box is reading it
[12:57:05] Wat can i do
[12:57:05] Still d same
[12:56:52] Is not working i try 3times
[12:07:19] I will do dat naw
[12:07:06] Ok
[12:05:20] How Dido i check data base
[12:05:12] I do i av internet
[11:48:48] Pls
[11:48:46] Wat d solution
[11:29:36] Sameting
[11:23:43] help cg8 tecno sighned file
[11:07:51] Ok sir
[11:05:50] remove all remote software
[10:42:44] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2021
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Product Brand : Qin
Product Device : ums312_2h10
Product Model : F21 Pro+
Product Name : ums312_2h10_Natv
Patch Level : RP1A.201005.001
Display ID : 0224SWP_T310_ADR_QVGA_MV3224_20211008
Ver. Incmt : 83
Ver. CodeName
[10:40:51] yes
[10:28:16] U got it
[09:37:14] https://romadd.com/tecno-ab7-firmware_ab7-h618a-p-210623v551_mt6765/
[09:23:58] Tecno AB7 firmware please...
[07:55:49] nokia ta1011 flash file
[07:17:53] I need help
[07:15:28] Ta-1380 nokia unlock ???,
[05:37:55] ok thanks
[05:36:54] Android 10
[05:36:35] Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
[05:36:13] U963
[05:35:37] help me with nvm file
[05:35:08] morng everyone
[05:34:45] Device info :
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 41115
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-09-05
Build Time : 11.10.2021
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03

InfinityBoxTalks 2021-11-14

[23:16:20] Found paired fdls, worked fine for reading info and dumping firmware, in the flashing process software got stuck on preparing target, after iv unselected a few tabs from the firmware, process went fine, please check this out, ill try to post logs tommorow
[22:47:37] Greetings people, do you know how to put the lg vs425pp in edl?
[18:43:28] How much in kenya?
[17:48:27] Ok
[17:26:19] How much to activate from reseller
[17:26:10] Ok
[17:15:48] How safe is it to activate infinity best bb5 on cm2 dongle.....and does it also have yearly activations?? And nk2 best and bb5 are they activated differently??
[16:03:05] ok thank you
[15:42:17] 😒
[15:41:39] Samsung Galaxy a51 imei change price?
[14:29:29] hello everyone looking for nvm data file
[14:29:01] Device info :
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 41115
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-09-05
Build Time : 11.10.2021
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03
[11:08:10] Please I need
Itel s16 (s16.fg)
[11:07:27] https://www.mediafire.com/file/r8mcgl3dg98l3qu/D.LIGHT_M1000_FIRMWARE%255BXonjey_Tech%255D.zip/file
[09:32:33] Hello sir CM2 Supports samsung phones?
[09:12:22] 👍 I will
[09:07:54] I know, thats why iv asked, Thank you.
[09:05:58] Ums312 chip
[09:05:54] Cant find loader for this device
[09:01:29] Sir, can you update me about the logs iv sent earlier?
[07:35:09] Update lgs and Qualcomm modules
[07:34:25] SC7731E
[07:31:26] Cm2 must support this phone
[07:19:33] Itel w6502 need
[07:16:32] Need a file for itel w6502 need frp
[06:59:16] My cm2 is working well now.
[06:59:06] Done 👍
[04:46:01] Cm2 not support samsung
[01:15:26] I wanna know how can i activate SM for Samsung mobiles plz
[01:14:29] Hello sir I just unbrick my LG D855 and flashed with infinity dongle succeded and works now

InfinityBoxTalks 2021-11-13

[23:51:32] INFO : has-slot:product:yes
INFO : has-slot:system_b-cow:no
INFO : security-patch-level:2021-05-05
INFO : vendor-fingerprint:Qin/ums312_2h10_Natv/ums312_2h10:11/RP1A.201005.001/121:user/release-keys
INFO : hw-revision:0
INFO : current-slot:b
INFO : serialno:21P+L2110000195
INFO : product:ums312_2h10
INFO : version-os:11
INFO : first-api-level:30
INFO : slot-count:2
INFO : max-download-size:0x10000000
INFO : version:0.4
INFO : version-baseband:
INFO : secure:yes
INFO : variant:Unisoc
INFO : dynamic-partition
[23:51:32] INFO : partition-type:vbmeta_vendor_a:raw
INFO : partition-type:teecfg_a:raw
INFO : partition-type:l_agdsp_a:raw
INFO : partition-type:l_runtimenv2:raw
INFO : partition-type:socko_a:raw
INFO : partition-type:l_cdsp_a:raw
INFO : partition-type:uboot_a:raw
INFO : partition-type:odmko_a:raw
INFO : partition-type:pm_sys_a:raw
INFO : partition-type:l_gdsp_a:raw
INFO : partition-type:mmcblk0boot1:raw
INFO : partition-type:vbmeta_product_a:raw
INFO : partition-type:dtbo_a:raw
INFO : partition-type:prodnv:ext4
INFO
[23:51:32] INFO : is-logical:system_ext_b:yes
INFO : is-logical:vendor_b:yes
INFO : is-logical:product_b:yes
INFO : is-logical:system_b-cow:yes
INFO : battery-soc-ok:no
INFO : battery-voltage:4003
INFO : off-mode-charge:1
INFO : treble-enabled:true
INFO : is-userspace:yes
INFO : partition-size:avbmeta_rs_a:0x100000
INFO : partition-size:miscdata:0x100000
INFO : partition-size:common_rs1_a:0x800000
INFO : partition-size:l_fixnv2_a:0x200000
INFO : partition-size:trustos_a:0x600000
INFO : partition-size:vbmeta_system_ext
[23:51:32] Infinity-Box Android Service Tool [AST] v1.03

Operation : Identify (ADB) [ v1.03 ]

Waiting for device in ADB mode ...

1. Connect device, enable \'DEVELOPER MODE\' and \'USB DEBUG\', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!

Connect Ok!

Device Info :
Vendor : DuoQin
Model : F21 Pro+
Device : ums312_2h10_Natv
Android : 11
Product : ums312_2h10
Brand : Qin
Serial : 21P+L2110000195

[23:50:37] Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : ums312_2h10_Natv-user 11 RP1A.201005.001 121 release-keys
Me
[23:50:02] Any available loader for the next phone that in the logs?
[22:12:17] No admin. Phone in bootlop now. Because it was flashed with with loader PR662B.pac file.
[22:02:50] I need d price .....renewing cm2 in Nigeria
[22:02:24] Wu knws d price.....
[21:56:16] 👆
[21:56:00] 👆
[21:55:46] 👆
[21:54:22] Long time. I sent it the same day you requested for the log.
@Izyflow too sent log for KF7 on same error.
[19:47:20] Admin please.... Infinix PR62B flash faild.
Any help please
[19:26:15] Any body pls
[19:26:03] How much is renew in Nigeria i av some dat wnt renew here
[19:12:03] Hello any one has tecno camon h535_c1 firmware?
[18:46:35] Download the file and Flash it
[18:32:05] Please house help me I need itel P651w nvram
[18:30:23] U can use UMT QUALCOM
[18:14:34] Are you solve
[18:13:43] Eft
[18:12:15] Sd
[17:18:18] i have flashed several times
[17:17:49] i need help am stuck
[17:12:50] Vodafone vfd600 network unlock need help
[17:05:39] Any solution MRD LX1F mtk
[14:45:15] Oppo A3s unlock?
[14:01:26] 🌹💙
thanks man
[13:32:49] kenya tuko
[13:29:29] Bro is memory tool taking much of your time let the team look for new solutions for new phones
[13:13:02] BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6765

[13:13:02] Card found : 4253DF52 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v98353 Ok!

Update configuration ...
Update Ok!
Load IDBase v98353 Ok!

Created by Infinity-Box (c) 2021
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt

Build Time : 24.08.2019
Display ID : LT_C3500
Patch Level : O11019
Product Info : LT_C3500
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Product Board : LT_C3500
Produ
[13:11:13] [FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
FAIL : INVALID GPT
ERR : 0xC0030008
ERR : INVALID GPT
ERR : 0x00000000|0x00E22390
[13:07:29] hello good day

Username: 0034652B8F
==> Scan c:\\InfinityBox for report.log
==> Scan c:\\Program Files for report.log
==> Scan c:\\Program Files (x86) for report.log
Found files: 0
==> Scan c:\\InfinityBox for *.ibin.log
==> Scan c:\\Program Files for *.ibin.log
==> Scan c:\\Program Files (x86) for *.ibin.log
Found files: 0
==> Scan c:\\InfinityBox for fault.bin
==> Scan c:\\Program Files for fault.bin
==> Scan c:\\Program Files (x86) for fault.bin
Found files: 1
Upload: c:\\InfinityBox\\CM2MT2\\fault.bin
{\"Error\":\"I
[13:02:04] How to solve this
[12:54:17] Connect without SLA
[12:38:54] Let me try
[12:37:58] And I see it\'s there on tab
[12:36:11] With this
[12:35:09] ???
[12:35:03] Is it supported
[12:34:56] Redmi 6A MI Account
[12:32:42] No fix available?
[11:01:42] https://forum.gsmhosting.com/vbb/f296/need-ismart-i1-glant-flash-file-plz-help-2994400/#post14478607
[10:59:40] Yes dm
[09:33:20] https://www.sharifphonesolutions.com/product/nokia-2-4-ta-1270-mt6765-downgrade-firmware-100-working/
[09:24:03] Any way forward ?
[09:22:33] Not connecting
[09:22:08] Any help need Oppo a52 smart rest solution
[09:18:01] HiGood morning please any solution to repair imei for huawei y6 mrd lx1f
[09:17:42] Good morning please any solution to repair imei for huawei y6 mrd lx1f
[09:17:10] Good morning please any solution to repair imei for huawei y6 mrd lx1f
[09:17:01] Good morning please any solution to repair imei for huawei y6 mrd lx1f
[08:56:53] Yes
[08:04:38] Infinity talks sir plz help
[08:03:12] Plz help
[08:02:47] ok
[08:01:08] Model selek tool full ❌
[07:57:44] Use nck
[07:54:48] Nko nayo
[07:35:37] Ta 1270
[07:35:08] Ineed nokia 2.4 downgrade file, help link pleas
[05:21:02] Not working for me
[05:17:27] Hi 👋 pleas I need auto wipe frp
[05:15:51] So what is your problem then?
[05:10:32] Why i cannot reset frp samsung from format fs/reset settings?
Only work for me manually wip PERSISTENT Partition from Extra Memory Tool.
[04:57:38] Pleas fix frp samsung not work from
[03:23:13] any sloution plz
[03:19:49] This file you send me link only show NVRAM
[03:17:55] http://www.mediafire.com/file/0xgn9o0b711wcw0/Nokia_1_TA-1047_MT6735_V8.1.0_180401.zip/file
[03:17:04] I don\'t have log I have flashed with different tool
[03:16:38] hello sir i unbrick the lg d855 now the problem is boot error certificate verification and phone turns off any sloution plz
[02:25:19] Without logs and phone in hand don\'t ask
[02:23:17] You have any?
[02:22:55] Logs
[02:22:42] Device is dead I need a good file
[02:21:07] For what?
[01:53:21] TA-1047 working firmware

InfinityBoxTalks 2021-11-12

[18:03:35] I need more because there are some craps that are going to let me eat to full stomach bro
[17:58:46] We jamaa bhana
[17:49:06] Contact (KD DEV )on Facebook he can give you from 10 credits
[17:47:27] Inbox.
[17:43:31] I need some 50 credits
[17:37:42] Surly will do so if it work
[17:37:08] Don\'t try to repair battery nor using other battery. You must buy its own battery for LG G3
[17:36:57] Really appreciate it sir from your time
[17:34:01] Thank you understood
[17:32:24] Okay sir i do nexttime
[17:31:52] but pc detects it
[17:31:31] LG D855 (G3) is old phone .buy new battery. The phone not dead only battery is dead
[17:31:22] exactly i know
[17:30:37] ummmm thanks alot
[17:30:25] i know but that time battery was not charging dont know y
[17:29:28] any sloution for that
[17:29:18] yes sir only the problem is my LG D855 dead while flash with infinity dongle cuase of low battery
[17:28:19] No only black screen in my computer manage shows only qualcom enough
[17:26:27] But going in download mode
[17:26:05] Oky wait for answer
[17:25:14] My LG D855 was dead after flash which was the cause of low battery what is the sloution for that
[17:23:58] Problem? Say here admin is offline
[17:22:48] why you dont you handle my problem plz always ignoring it
[17:20:41] Hiyo ni wewe mkuu
[17:20:40] I have a question from admin plZ
[17:20:23] Hello everyone
[17:09:48] Tutaendelea kuishi nao mbona tuna repair kila siku?
[17:09:03] 😀😀
[17:08:04] Atajua yeye, ila namuonaga huku long time..
Aweke namba yake tuione
[17:06:36] Askari huyo
[17:06:22] Habari
[17:06:09] Tupo wengi tu
[17:04:02] Tupo
[16:54:39] Tupo
[16:54:28] Looking friends from Tanzania
[16:53:39] Yes
[16:53:37] Card found : 27071AD6 , v0150 Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14 Load IDBase v8331 Ok! Operation : SP Unlock [ v2.14 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : Cosmo_00WW-user 11 RP1A.201005.001 V1.270_
[16:18:23] Huawei y360-u61 flashing with cm2 done but set dead

Flashing with sp flash tool with same firmware back to lifetime
[15:55:16] if u have pac file load it and remove frp
[15:52:25] >>> Error : Flashing failed!
>>> Check previous message for more info!

Reconnect Power/Cable!
[15:52:25] Hello support,
Am facing this error during flash. Please any help.

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : Infinix_PR652B.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block
[15:12:34] okay thank you sir.
[14:21:10] Itel A24 W5007 android 10
100% unlocked by cm2 free👌
[14:00:47] Admin please help
[13:54:43] Gionee S10 have tried all the boot
[13:54:27] Please help admin
[13:22:11] Card found : 7DEF7B43 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

Update configuration ...
Update Ok!
Load IDBase v98353 Ok!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM15)
MODE : BOOTROM
PORT : 15
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
[13:15:31] after expiry can i use old models with server credits like unlocking?
[12:29:54] customer will collect it from me
[12:29:36] 😭😭😭😭😭😭😭😭😭
[12:26:34] Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : W6501-F3111-9.0-OP2-V018-20201012
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

Platform Version: MOCORTM_17C_ITEL_RLS2_W19.28.5_P6_Debug
Project Ve
[12:24:43] ooh sorry....let me post that then
[12:23:44] it formatted but didnt remove frp
[12:14:13] thats where its stucked since!!
[12:13:57] Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
[11:50:25] Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel W6501
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
[11:42:27] will i still use CM2 server when expire? for unlocking i have CM2 SPD2.11?
[11:35:51] Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel W6501
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[11:09:32] Support pls help on itel w6501 format
[08:23:32] Thanks
[08:19:10] And infinix
[08:19:05] Not displaying techno phones
[08:11:17] Credit pruce pls
[08:11:00] Sir i think 8 mont expire i m using spd 2.11 version and mtk version 2.21

InfinityBoxTalks 2021-11-11

[20:49:30] File is already uploaded on IOS support site
[20:41:20] Problem comes by flashing device using Infinix_PR652B.pac instead of using it as FDL
[20:40:16] I have received one in bootloop
[20:39:54] hello here!!!
please anyone with Infinix PR652B-F6317-11.0-OP-V036-20210708
[19:39:38] I will do that
[19:39:21] Ok thank you
[19:38:27] Load firmware and go to service remove frp
[19:37:16] Pls did cm2 support it because I try to use it but was not reading
[19:36:33] Add file and remove frp
[19:35:12] I did not flash it with cm2 I use spd free tools
[19:33:20] Pls post identify logs
[19:32:55] Put IOS Id the password.
And do process again with active internet connection.
[19:32:31] Good day team, I manually bypass frp on tecno spark 7(kf6h) in the process the phone refuses to boot to menu then I downloaded file from iOS to flash, it has boot now but the frp is still there. I need help pls
[19:21:08] Try SLA and hold volume up if failed go to TECNO mixed da
[18:00:50] I need itel w6501 loader
[18:00:29] Set it IOS account, it will work
[17:49:37] Itel w6501 password remove help
[17:37:02] connect PC to network
[17:28:52] Already set
[17:26:46] set your IOS account
[17:26:27] Tecno BD3 android 11 frp solutions please. MT2 not working
[17:25:25] Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
Server Error : Access denied: {\"Message\":\"Access denied 0050170972 auth\"}

[17:24:13] How do I loader it?
[17:23:57] log
[17:22:49] Fail didn\'t work
[17:18:50] 👇
[17:12:29] Please help👏👏me
[17:12:12] Itel s16 frp solution
[16:20:02] Hallo
[16:18:20] Itel w6502 loader for cm2sp2
[16:05:43] Jkm-lx1 solution plss?
[15:15:42] 😏😏😏😔😔😔😔
[15:04:06] DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00080000 [ 512.00 KB ] DRAM: 0x180000000 [ 6.00 GB ] UFS: AD014839485135334145434D4D444152 UFS: VEN : 0x01AD VID : H9HQ53AECMMDAR IFW : 0004 LU0 : 0x00400000 [ 4.00 MB ] LU1 : 0x00400000 [ 4.00 MB ] LU2 : 0xEE5800000 [ 59.59 GB ] FSN : 0D8095E0ABC4 REG : 0x103010000 CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 6DA5818CB6187FAE4A843161FDEF1C3 DA : USB : HIGH-SPEED Boot done! SmartInfo :
[15:04:06] Card found : 5B5B5B95 , v0149 Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.26 Load IDBase v77228 Ok! UserName and/or Password not set! Can\'t continue! Update failed! Check settings and/or internet connection! Operation : Identify [ v2.26 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM10) MODE : BOOTROM PORT : 10 Waiting BOOT ack ... BROM : Ski
[15:03:54] ???
[15:01:31] Help file for tecno camon 11 plz
[14:58:17] Sl3 nck
[14:56:24] Nokia best
[14:42:16] Help me firmware file for tecno camon 11 CF7S
[14:42:00] Hello
[14:38:01] !😳😳🙄
[14:37:58] Is it posibble to restore spd backup and return back or use it to flash other same phone
[14:37:04] Elloooo
[14:30:52] Hi
[14:30:43] Hi
[14:30:34] Hi
[14:30:27] Hi
[14:30:16] Hi
[14:30:04] Hi
[14:29:53] Hi
[14:29:45] Hi
[14:29:30] Hi
[14:29:19] Hi
[14:29:07] Hi
[14:28:38] Hi
[14:28:25] Hi
[14:27:56] Hi
[14:15:32] Hello all of you dear ones, I had a question, does Samsung Dunkel support cm2 to remove frp?
[14:15:04] Solved by cm2sp2 sharp shooter 👍
[14:05:34] TECNO BD1 Loader please help
[13:52:02] 👍
[13:51:40] okay done, thanks.
[13:50:34] Just put your IOS Id and password in setting .
It will update database when you re-start the exe.
[13:50:23] Just put your IOS Id and password in setting .
It will update database when you re-start the exe.
[13:35:52] Where to find this database version?
[13:08:11] 😳😳🙄
[13:08:11] It makingd phone to restart
[13:08:11] Pls can restore d backup on spd to same spd .....it not working
[13:06:54] My idbase v718267 how do I update mine?
[12:57:48] Bypass manually is
[12:56:15] Thanks
[12:55:33] Go to infinity support and download da file
[12:51:37] 🙈🙈🙈 I\'m using v2.07!!!!!!
[12:50:43] Direct just tick SLA
[12:50:03] What base can I select?
[12:49:32] 100% cm2 support
[12:47:55] Infinix smart 5 X657 frp , cm2& nck not support
[12:42:32] Fail to reading FW
[12:41:02] SRAM: 0x00080000 [ 512,00 KB ]
DRAM: 0x180000000 [ 6,00 GB ]

UFS: 2C0131323847422D5546532D4D542020
UFS:
VEN : 0x012C
VID : 128GB-UFS-MT
IFW : 9QSM
LU0 : 0x00400000 [ 4,00 MB ]
LU1 : 0x00400000 [ 4,00 MB ]
LU2 : 0x1DCA800000 [ 119,16 GB ]
REG : 0x101010000

CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : A93BE98BA8C16F011B3CB972AC8EC
[12:41:02] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Krug
TYPE : MODERN [RAPHAEL]
BROM : MEID : DBF801C83861B59FC5917DD0759FE0AA
BROM : SecLevel : 0x000
[12:35:03] A107F Frp
[12:33:04] You mean it cost to read full firmware?
[12:28:01] Cost
[12:19:27] ✅سرویس جهانی شیاومی اکانت فعال است

✔️Xiaomi Mi Account Unlock Service Worldwide

✔️Clean Imei
✔️Time 24H

✅بهترین قیمت و تضمین کار
➖➖➖➖➖➖➖➖➖➖➖
GSM_BOX
SAMAN_GSM
09379441741
[12:17:38] https://youtu.be/p1cL_jftS5c
[12:06:58] Ellooooo anybody
[12:05:19] Watch this video
[12:05:03] https://youtu.be/Cp2MBPfyXqI
[12:02:45] Rename to UK.off
[12:01:49] https://t.me/InfinityBoxTalks/37311
[12:01:12] Go so spd location and search uk off file and remove
[12:00:44] I dont have UK. Off
[12:00:42] Here
[11:59:54] Past uk off inside his folder
[11:59:45] Where i can get it
[11:59:11] Y can\'t some restore backup file spd phone back to d same phone it will b restarting
[11:58:57] Get uk off
[11:55:29] Connect with test point
[11:34:02] https://support.halabtech.com/index.php?a=downloads&b=file&id=519036
[11:26:07] 👆
[11:26:01] Plz give me solutions
[11:08:19] UK.Off
[11:08:02] Hello team
[10:49:26] Any solution ,i had removed password so i was bypasing frp
[10:40:50] Firmware
[10:40:45] Tecno pop5 bd2p
[10:40:33] Anybody
[10:40:26] Hi
[10:03:07] If is working then send me cradits price pls.?
[10:02:51] And sir cradits is working with expire dongle are not
[10:02:31] Sir i have cm2mt2 but expire can i get cradits and use ?
[10:02:27] That one is MDM locked, Nokia C1 plus
[09:51:54] I need
UK.Off
[08:44:21] Cm keeps crashing every time
[08:42:41] Hi
[07:49:24] MTK device.
[07:49:13] Help.
[07:49:09] Meizu metal 1 hard password remove
[07:00:35] I can send id and pass for teamviewer ? to help me solve this
[07:00:23] I can send id and pass for teamviewer ?
[06:59:48] ok, now?
[06:59:31] done
[06:57:41] Ok
[06:20:56] https://t.me/FlashFileSearchBot
[06:19:55] thanks support link please
[06:19:07] Go to support download boot file then enjoy
[06:17:53] admin please help infinix hot 10i android 11 frp its a spd chipset

InfinityBoxTalks 2021-11-10

[21:19:15] Ok thank you sir
[19:15:00] Yet ths model is supported in Sp2
[19:05:17] Or pac file to remove frp
[19:05:02] Tecno A23 pro (L5006s) FDL file anyone help
[19:00:02] Good day team pls were can I download tecno spark7(kf6h)spd file thanks
[17:47:02] ok
[16:58:20] Romania
[16:19:43] Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
[16:19:43] admin help me with neon ray pro fdl
[16:10:28] Look
[15:51:33] When I want enter in download software or flash file server not working
[15:48:51] somebody to help me neon ray pro that hangs on logo
[15:42:22] Someone knows how can I
[15:41:58] Expired*
[15:41:54] Because I supose my inifinity best support is epired
[15:41:17] And i can.t flash
[15:41:02] I want to flash nokia ta1080
[15:40:54] And i need help
[15:40:49] I have this situation
[15:40:30] Hello
[14:32:16] Anybody tecno pop5 easybuy anybody
[13:49:42] need frimware lenovo tb3-730m help
[13:21:28] Me too
[13:14:57] i need to reset
[12:47:31] Help vivo y15 da not working
[11:54:24] battery down, maybe later
[11:51:58] Operation : Unlock BootLoader [ v2.28 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM20)
MODE : BOOTROM
PORT : 20
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 7F30C73D0E136BD2184D9AB19C82BDCD
BROM :
[11:37:06] I have evidence hear
[11:36:55] I found bug on Cmtmt2, after unlocked Bootloader of devices, storage reduce.
[11:32:11] OPPO F9 PRO
[11:32:04] Operation : Reset Settings/Format FS [ v2.22 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : D8994F23797D88A815B447C5CFE316DC
BRO
[11:25:23] I want ta-1034 hindi-gujarati Language firmware
[09:16:14] Wat
[09:07:05] 😠
[08:48:08] Peace🤘🤘🤟🤟🤟✌️✌️✌️✌️✌️
[08:47:57] Ok
[08:47:56] And put off u window diffender
[08:47:37] Try to update ur windows wen u av issue wit ur cm2
[08:47:18] Till now nothing no issue no problems no complain
[08:46:55] It stop working sometym ago but later work wen i update d window
[08:46:29] No issues wit my cm2
[08:44:14] 🙈🙈🙈🙈
[08:44:13] 🤷🏾‍♂🤷🏾‍♂🤷🏾‍♂🤷🏾‍♂
[08:44:11] 😁😁😁😁
[08:44:07] On my window eleven by gsmrested file i av team view anydesk usbhub gsmxteam latest crack miracle and mrt Samsung zec crack and everythnings work like magic all i did is up date d windows den am Goood no issues
[08:04:34] 👌❤️
[08:03:01] depending on the computer, and then it gives errors or sometimes doesn\'t open when someone installs teamviewer or something that shares dongle.
[08:00:08] crack does not kill DONGLE, calm and windows it.
[07:55:30] brother, your box works, but recent modules sometimes don\'t open, it varies from windows to windows, or from computer to computer, I used windows 10 pro and my dongle didn\'t open modules, now I\'m using 10 home and it\'s running on one good, windows 10 pro 21h2, windows 11 give this problem, i recommend changing windows test another one and it will work, good morning.
[07:31:14] ok bro thank you god bless
[07:22:43] really eh I did not find myself at all, thank you anyway for the help.
[07:05:26] Spd tool next Updet auto detect
Model not slct model direct auto conct unlock frp plzzzzz
Adddd
[06:56:17] Let me write it when am free
[06:54:52] How can i locate my earlier sent messages..the solution ia somewhere there.
[06:46:51] 😳
[06:38:26] I just downloaded miracle crack from the internet if he died for it, let the money I gave be haram and not halal, you are a thief
[06:31:47] Meizu M1 Metal HARD RESET IS SUPORTTED?
[05:54:37] All done
[05:54:33] Fix baseband zex for imei
[05:54:13] I did one some other tym
[05:53:58] No but can dis baseband
[02:40:05] Did you manage this problem,if no reply me i help you

InfinityBoxTalks 2021-11-09

[22:13:45] You crack think I did it, I didn\'t, you took my money, the dongle is not working
🙏🏻
[21:59:33] why don\'t you want to understand i didn\'t make that video i just downloaded it
[21:57:59] I didn\'t make the video, I just downloaded it bro, if I knew enough to do it, I wouldn\'t insist so much to fix the dongle.
[21:47:33] I just downloaded it I don\'t know enough to do it
[21:46:37] You don\'t think I made the video, do you?
[21:43:14] I sent you the what can I tell you video, I downloaded it from there, I don\'t have any money, how many dongles should I buy, I downloaded the miracle
[21:40:08] I\'ll go and buy another dongle tomorrow, if I have the right, it\'s haram for you, I don\'t halal, you got money, you are not interested :(
[21:36:35] I could not open a topic in the forum, I am not a member, I want to write, it does not work, is there no telegram, to whom can I write other than you?
[21:32:38] crack you think i did it i wish i had a talent like that I swear I can\'t do it even if I want so much I can\'t do it I don\'t understand
[21:32:21] Can CM2 repair Samsung a12 imei?
[21:30:03] I downloaded the crack, I sent the link, what is the problem, what should I do, what else do you want, can you tell me?
[21:29:16] What do you want from me now, can you tell me what I did?
[21:28:47] Let me try
[21:24:13] I\'m saying brother, there is only miracle crack, there is a dongle with the other, why should I use crack, am I an idiot, I already have a dongle, only miracle crack
[21:21:29] But mtk drivers doesn\'t recognize the phone do we have specific ones for the phone
[21:14:12] ask the boom
[21:13:29] https://www.youtube.com/watch?v=HELrgEOeB_E
[21:11:27] I\'m just using miracle crack, are the others dongle it\'s a problem, I need to remove it
[21:05:43] i told you dft tool z3x chimera sigma hcu e-gsmtool hydra tgt tool I have these and you are asking about them
[21:04:43] Am looking for zuri s56 chipset
[21:04:17] Link
[21:03:52] I should used the old dongle manager?
[21:03:20] It\'s not crack, it\'s dongle. I\'ll give you team wiever, can you connect and check, can\'t you handle it today?
[20:58:42] is there anyone who can solve our problem i can\'t open it since morning
[20:44:17] Hmmm
[20:41:41] same problem with me
[20:39:31] Is not opening more than that
[20:37:37] I don\'t understand, just hydra tool wasn\'t opening, I watched a video on youtube, I did something according to it, I couldn\'t do it, hydratool connected and did it, it was connected in dft tool
[20:34:27] Best but yearly paid for new updates
[20:33:27] I am planning to buy infinity box or dongle, somebody explain me about cm2, best also is this product life time or yearly activation?
[20:32:09] dft tool e-gsm tool sigma tool hydra all connected and done it\'s not just you
[20:07:25] What information do you want, can you connect and see? I don\'t know much English.
[20:03:54] can you connect if i give team wiever
[20:03:40] But I don\'t seem to understand why that particular one is not opening again
[20:01:11] I didn\'t use it, I just formatted the computer, then I tried to install it, it doesn\'t work
[19:31:41] when tick sla cm2 can run when untick da error
[19:29:56] Samsung sm-a107m frp failed
[19:13:05] it doesn\'t work, i couldn\'t solve the problem
[19:02:24] I couldn\'t open a dongle, can you help me please, I couldn\'t register the link you sent.
[19:00:20] Admin and me?
[18:57:04] Let me try it then inform you tomorrow
[18:55:27] Will it work with a new email?
[17:51:44] Its spd
[17:51:40] ?
[17:51:38] __
[17:51:37] error help
[17:51:31] === DongleManager [Infinity] v1.88 [9.11.2021 20:50:26] ===
Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Card-Reader: Generic EMV Smartcard Reader 0
HWID: 0000289818164082
Box/Dongle found: Infinity-Box/Dongle [CM2]
Reading...
Serial No (S/N): 1F022898
Firmware version: 0150.02
=== Started: 9.11.2021 20:50:27 ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authen
[17:51:28] Will it remove frp?
[17:44:19] Seems like it\'s spd
Unlock and factory Reset suppored on diag port
[17:42:00] Downgrade it it work
[17:37:03] Does cm2 support nokia Ta-1312 please help me
[16:20:42] Can samsung j106h be unlocked MDM lock? so that i can write flash firmware
[16:17:57] Read info first, to know.
[16:08:34] can can cm2 do this too?
[16:06:33] can cm2 reset sm-a107m?
[16:00:06] Come
[15:59:46] a207f android 11 frp remove
[15:24:49] ItelA16 plus dead any solution??? Flashed but fail
[14:57:42] Please help
[14:49:35] Can I activate cm2 spd on best infinty without having to buy cm2 and how much is the activation price
[14:48:53] 🆘
[14:48:13] redmi 7 mi account help.
[14:44:43] I need help ooooo
[14:38:38] Thank you.
In any case, the option is always disabled.
I\'m assuming that spd processor is not supported. Unlock network
[14:34:31] hel me please
[14:34:25] Device : Nokia6.2 ( Starlord )
BLType : WT2
SecVer : 02
Device authentification ...
Processing server operation ...
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version is valid
Process...
Process faled: Connection Closed Gracefully.
Disconnected
Server reported error!
Disconnected
Finished

Error : Device auth failed! Server reported error!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!
[14:26:57] I have turn on and off uk edition
[13:56:59] Same issue bro
[13:55:37] Done with the first step
[13:50:42] Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

zte blade A3 2019
[13:43:58] I want to know.
Why is the sp unlock option not activated? Do I need credit or an account for activation?
[13:41:24] How do I log on
[13:40:36] No
[12:58:27] This option is the account and password. What is the use for us?
[12:56:57] But I will do now
[12:56:33] Yet to work on it
[12:55:25] Ta-1279
[12:52:14] The problem has been resolved.
But now I want to unlock the network and the option is not activated
[11:56:33] oppo A73 UNLOCK WITH CM2?
[11:47:43] I need to renew
[11:46:06] Ta-1279
[11:46:00] I need to unlock the network
[11:35:12] Wipe without data loss
[11:34:49] Any solution tecno kd7h
[11:11:27] Realme 8 pro infinity support? Remove passcode is Qualcomm
[11:09:41] Alcatel a509dl
[10:53:22] Ta-1279
[10:19:39] Inbox
[09:47:35] yes i hope you will pay me 2$?
[09:36:21] Only remote
[09:33:26] if i may ask ... how do one get HMD Tool licence or tool...?
[08:48:08] Hmd service
[08:43:35] Cm2 misconfiguration help
[08:40:04] https://gsmtestedfile.com/index.php?a=downloads&b=folder&id=2678
[08:23:23] Seriously
[07:39:12] Yes i know
[06:30:00] no way after repair you need to repair network.
[06:27:36] octoplus frp t. point
[06:17:57] Impossible
[06:07:16] Realme X RMX 1901 REALME account remove anyone who can help me.I can pay
[05:52:46] Same issue a025g
[05:46:35] 🙄
[05:46:35] Hi everybody Samsung a205F frp Pls version 11
[05:28:53] Mtk?
[05:25:39] I want repair imei on Samsung a225f with cm2 please help
[03:39:19] I had told you that, say you didn\'t know what I said.

IOS= INFINITY ONLINE SERVICE.

InfinityBoxTalks 2021-11-08

[20:55:08] Ok.
tomorrow
[20:44:27] Thanks to you it worked God bless .
[20:32:48] What next after that step?
[20:29:54] 🙏
[20:29:39] Show me how to go about it boss
[20:09:24] I need to this firmware
[20:09:13] Hello
[20:09:00] Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6583 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM :
[18:41:46] Hie infinity team can you add nokia c10 and c20 frp
[18:25:29] ta-1279
[18:25:03] Hi.
I want to know if the device is supported or not supported to unlock the network
[18:19:32] I even have the file downloaded but Ras
[18:18:11] how I could save the file when the thing can\'t do the read info
[17:47:41] And backup full firmware?
[17:25:03] in fact the phone is stuck on logo, then I try the read info which does not pass.
[17:10:14] Login to IOS first
[16:49:24] Download other setup then try!
[16:48:21] It happens when I applied the latest update
[16:47:59] Have done that.. it still return the same error
[16:43:16] That\'s normal, stop antivirus, delete installation folder , then reinstall setup
[16:36:56] Trying to connect phone but failed
[16:36:41] Is there any issue with CM2SP2 ?
[16:12:53] The rest of the CM2 is working perfectly fine but that one is not
[16:12:11] I just bought the box and I have not enjoy it at all
[16:11:44] Not yet but I think I will do that now
[16:05:56] Done all this stuff n not working
[16:02:34] Please, someone should help me out with my cm2

After upgrading CM2MT2 v2.28 is not longer opening
[16:02:15] After upgrading CM2MT2 v2.28 is not longer opening
[16:01:10] Please, someone should help me out with my cm2
[15:53:28] How to install Huawei com port 1.0
[15:25:07] and model name
[15:25:00] what do you want to do ???
[15:11:05] i cant find it
[14:17:10] hello there
[14:04:24] 🆘
[14:04:18] HELP
[14:02:23] Operation : Reset Settings/Format FS [ v2.22 ]
Mode : FULL FACTORY ( WIPE + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM76)
MODE : BOOTROM
PORT : 76
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : MEID : 2AA1D318B6979AC3BEA184AEC5
[13:42:34] Thank u babab
[13:31:15] No need
[13:31:12] It ok
[13:13:41] Card found : 7DEF7B43 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v98353 Ok!

Update configuration ...
Update Ok!
Load IDBase v98353 Ok!

Operation : Read Firmware [ v2.28 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM18)
MODE : BOOTROM
PORT : 18
Waiting BOOT ack ...
BROM : Skip ACK verif
[13:11:16] Card found : , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v98353 Ok!

Update configuration ...
Update Ok!
Load IDBase v98353 Ok!
[12:42:20] Operation : Read Firmware [ v2.28 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM11)
MODE : BOOTROM
PORT : 11
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 586CB81150C71A5
[12:37:31] Operation : Read Firmware [ v2.28 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 38204457DAF1C97D
[12:31:23] Okay
[12:30:42] How do I update database
[12:29:41] Card found : 7DEF7B43 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can\'t continue!

Update failed! Check settings and/or internet connection!

Operation : Read Firmware [ v2.28 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM15)
MODE : BOOTROM
PO